Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 162 insertions, 0 deletions

diff --git a/Documentation/power/energy-model.rst b/Documentation/power/energy-model.rst
new file mode 100644
index 000000000..a6fb986ab
--- /dev/null
+++ b/Documentation/power/energy-model.rst
@@ -0,0 +1,162 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=======================
+Energy Model of devices
+=======================
+
+1. Overview
+-----------
+
+The Energy Model (EM) framework serves as an interface between drivers knowing
+the power consumed by devices at various performance levels, and the kernel
+subsystems willing to use that information to make energy-aware decisions.
+
+The source of the information about the power consumed by devices can vary greatly
+from one platform to another. These power costs can be estimated using
+devicetree data in some cases. In others, the firmware will know better.
+Alternatively, userspace might be best positioned. And so on. In order to avoid
+each and every client subsystem to re-implement support for each and every
+possible source of information on its own, the EM framework intervenes as an
+abstraction layer which standardizes the format of power cost tables in the
+kernel, hence enabling to avoid redundant work.
+
+The figure below depicts an example of drivers (Arm-specific here, but the
+approach is applicable to any architecture) providing power costs to the EM
+framework, and interested clients reading the data from it::
+
+       +---------------+  +-----------------+  +---------------+
+       | Thermal (IPA) |  | Scheduler (EAS) |  |     Other     |
+       +---------------+  +-----------------+  +---------------+
+               |                   | em_cpu_energy()   |
+               |                   | em_cpu_get()      |
+               +---------+         |         +---------+
+                         |         |         |
+                         v         v         v
+                        +---------------------+
+                        |    Energy Model     |
+                        |     Framework       |
+                        +---------------------+
+                           ^       ^       ^
+                           |       |       | em_dev_register_perf_domain()
+                +----------+       |       +---------+
+                |                  |                 |
+        +---------------+  +---------------+  +--------------+
+        |  cpufreq-dt   |  |   arm_scmi    |  |    Other     |
+        +---------------+  +---------------+  +--------------+
+                ^                  ^                 ^
+                |                  |                 |
+        +--------------+   +---------------+  +--------------+
+        | Device Tree  |   |   Firmware    |  |      ?       |
+        +--------------+   +---------------+  +--------------+
+
+In case of CPU devices the EM framework manages power cost tables per
+'performance domain' in the system. A performance domain is a group of CPUs
+whose performance is scaled together. Performance domains generally have a
+1-to-1 mapping with CPUFreq policies. All CPUs in a performance domain are
+required to have the same micro-architecture. CPUs in different performance
+domains can have different micro-architectures.
+
+
+2. Core APIs
+------------
+
+2.1 Config options
+^^^^^^^^^^^^^^^^^^
+
+CONFIG_ENERGY_MODEL must be enabled to use the EM framework.
+
+
+2.2 Registration of performance domains
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Drivers are expected to register performance domains into the EM framework by
+calling the following API::
+
+  int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,
+		struct em_data_callback *cb, cpumask_t *cpus);
+
+Drivers must provide a callback function returning <frequency, power> tuples
+for each performance state. The callback function provided by the driver is free
+to fetch data from any relevant location (DT, firmware, ...), and by any mean
+deemed necessary. Only for CPU devices, drivers must specify the CPUs of the
+performance domains using cpumask. For other devices than CPUs the last
+argument must be set to NULL.
+See Section 3. for an example of driver implementing this
+callback, and kernel/power/energy_model.c for further documentation on this
+API.
+
+
+2.3 Accessing performance domains
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+There are two API functions which provide the access to the energy model:
+em_cpu_get() which takes CPU id as an argument and em_pd_get() with device
+pointer as an argument. It depends on the subsystem which interface it is
+going to use, but in case of CPU devices both functions return the same
+performance domain.
+
+Subsystems interested in the energy model of a CPU can retrieve it using the
+em_cpu_get() API. The energy model tables are allocated once upon creation of
+the performance domains, and kept in memory untouched.
+
+The energy consumed by a performance domain can be estimated using the
+em_cpu_energy() API. The estimation is performed assuming that the schedutil
+CPUfreq governor is in use in case of CPU device. Currently this calculation is
+not provided for other type of devices.
+
+More details about the above APIs can be found in include/linux/energy_model.h.
+
+
+3. Example driver
+-----------------
+
+This section provides a simple example of a CPUFreq driver registering a
+performance domain in the Energy Model framework using the (fake) 'foo'
+protocol. The driver implements an est_power() function to be provided to the
+EM framework::
+
+  -> drivers/cpufreq/foo_cpufreq.c
+
+  01	static int est_power(unsigned long *mW, unsigned long *KHz,
+  02			struct device *dev)
+  03	{
+  04		long freq, power;
+  05
+  06		/* Use the 'foo' protocol to ceil the frequency */
+  07		freq = foo_get_freq_ceil(dev, *KHz);
+  08		if (freq < 0);
+  09			return freq;
+  10
+  11		/* Estimate the power cost for the dev at the relevant freq. */
+  12		power = foo_estimate_power(dev, freq);
+  13		if (power < 0);
+  14			return power;
+  15
+  16		/* Return the values to the EM framework */
+  17		*mW = power;
+  18		*KHz = freq;
+  19
+  20		return 0;
+  21	}
+  22
+  23	static int foo_cpufreq_init(struct cpufreq_policy *policy)
+  24	{
+  25		struct em_data_callback em_cb = EM_DATA_CB(est_power);
+  26		struct device *cpu_dev;
+  27		int nr_opp, ret;
+  28
+  29		cpu_dev = get_cpu_device(cpumask_first(policy->cpus));
+  30
+  31     	/* Do the actual CPUFreq init work ... */
+  32     	ret = do_foo_cpufreq_init(policy);
+  33     	if (ret)
+  34     		return ret;
+  35
+  36     	/* Find the number of OPPs for this policy */
+  37     	nr_opp = foo_get_nr_opp(policy);
+  38
+  39     	/* And register the new performance domain */
+  40     	em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb, policy->cpus);
+  41
+  42	        return 0;
+  43	}