Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

37 files changed, 11748 insertions, 0 deletions

diff --git a/Documentation/process/1.Intro.rst b/Documentation/process/1.Intro.rst
new file mode 100644
index 000000000..c3d0270bb
--- /dev/null
+++ b/Documentation/process/1.Intro.rst
@@ -0,0 +1,268 @@
+.. _development_process_intro:
+
+Introduction
+============
+
+Executive summary
+-----------------
+
+The rest of this section covers the scope of the kernel development process
+and the kinds of frustrations that developers and their employers can
+encounter there.  There are a great many reasons why kernel code should be
+merged into the official ("mainline") kernel, including automatic
+availability to users, community support in many forms, and the ability to
+influence the direction of kernel development.  Code contributed to the
+Linux kernel must be made available under a GPL-compatible license.
+
+:ref:`development_process` introduces the development process, the kernel
+release cycle, and the mechanics of the merge window.  The various phases in
+the patch development, review, and merging cycle are covered.  There is some
+discussion of tools and mailing lists.  Developers wanting to get started
+with kernel development are encouraged to track down and fix bugs as an
+initial exercise.
+
+:ref:`development_early_stage` covers early-stage project planning, with an
+emphasis on involving the development community as soon as possible.
+
+:ref:`development_coding` is about the coding process; several pitfalls which
+have been encountered by other developers are discussed.  Some requirements for
+patches are covered, and there is an introduction to some of the tools
+which can help to ensure that kernel patches are correct.
+
+:ref:`development_posting` talks about the process of posting patches for
+review. To be taken seriously by the development community, patches must be
+properly formatted and described, and they must be sent to the right place.
+Following the advice in this section should help to ensure the best
+possible reception for your work.
+
+:ref:`development_followthrough` covers what happens after posting patches; the
+job is far from done at that point.  Working with reviewers is a crucial part
+of the development process; this section offers a number of tips on how to
+avoid problems at this important stage.  Developers are cautioned against
+assuming that the job is done when a patch is merged into the mainline.
+
+:ref:`development_advancedtopics` introduces a couple of "advanced" topics:
+managing patches with git and reviewing patches posted by others.
+
+:ref:`development_conclusion` concludes the document with pointers to sources
+for more information on kernel development.
+
+What this document is about
+---------------------------
+
+The Linux kernel, at over 8 million lines of code and well over 1000
+contributors to each release, is one of the largest and most active free
+software projects in existence.  Since its humble beginning in 1991, this
+kernel has evolved into a best-of-breed operating system component which
+runs on pocket-sized digital music players, desktop PCs, the largest
+supercomputers in existence, and all types of systems in between.  It is a
+robust, efficient, and scalable solution for almost any situation.
+
+With the growth of Linux has come an increase in the number of developers
+(and companies) wishing to participate in its development.  Hardware
+vendors want to ensure that Linux supports their products well, making
+those products attractive to Linux users.  Embedded systems vendors, who
+use Linux as a component in an integrated product, want Linux to be as
+capable and well-suited to the task at hand as possible.  Distributors and
+other software vendors who base their products on Linux have a clear
+interest in the capabilities, performance, and reliability of the Linux
+kernel.  And end users, too, will often wish to change Linux to make it
+better suit their needs.
+
+One of the most compelling features of Linux is that it is accessible to
+these developers; anybody with the requisite skills can improve Linux and
+influence the direction of its development.  Proprietary products cannot
+offer this kind of openness, which is a characteristic of the free software
+process.  But, if anything, the kernel is even more open than most other
+free software projects.  A typical three-month kernel development cycle can
+involve over 1000 developers working for more than 100 different companies
+(or for no company at all).
+
+Working with the kernel development community is not especially hard.  But,
+that notwithstanding, many potential contributors have experienced
+difficulties when trying to do kernel work.  The kernel community has
+evolved its own distinct ways of operating which allow it to function
+smoothly (and produce a high-quality product) in an environment where
+thousands of lines of code are being changed every day.  So it is not
+surprising that Linux kernel development process differs greatly from
+proprietary development methods.
+
+The kernel's development process may come across as strange and
+intimidating to new developers, but there are good reasons and solid
+experience behind it.  A developer who does not understand the kernel
+community's ways (or, worse, who tries to flout or circumvent them) will
+have a frustrating experience in store.  The development community, while
+being helpful to those who are trying to learn, has little time for those
+who will not listen or who do not care about the development process.
+
+It is hoped that those who read this document will be able to avoid that
+frustrating experience.  There is a lot of material here, but the effort
+involved in reading it will be repaid in short order.  The development
+community is always in need of developers who will help to make the kernel
+better; the following text should help you - or those who work for you -
+join our community.
+
+Credits
+-------
+
+This document was written by Jonathan Corbet, corbet@lwn.net.  It has been
+improved by comments from Johannes Berg, James Berry, Alex Chiang, Roland
+Dreier, Randy Dunlap, Jake Edge, Jiri Kosina, Matt Mackall, Arthur Marsh,
+Amanda McPherson, Andrew Morton, Andrew Price, Tsugikazu Shibata, and
+Jochen Voß.
+
+This work was supported by the Linux Foundation; thanks especially to
+Amanda McPherson, who saw the value of this effort and made it all happen.
+
+The importance of getting code into the mainline
+------------------------------------------------
+
+Some companies and developers occasionally wonder why they should bother
+learning how to work with the kernel community and get their code into the
+mainline kernel (the "mainline" being the kernel maintained by Linus
+Torvalds and used as a base by Linux distributors).  In the short term,
+contributing code can look like an avoidable expense; it seems easier to
+just keep the code separate and support users directly.  The truth of the
+matter is that keeping code separate ("out of tree") is a false economy.
+
+As a way of illustrating the costs of out-of-tree code, here are a few
+relevant aspects of the kernel development process; most of these will be
+discussed in greater detail later in this document.  Consider:
+
+- Code which has been merged into the mainline kernel is available to all
+  Linux users.  It will automatically be present on all distributions which
+  enable it.  There is no need for driver disks, downloads, or the hassles
+  of supporting multiple versions of multiple distributions; it all just
+  works, for the developer and for the user.  Incorporation into the
+  mainline solves a large number of distribution and support problems.
+
+- While kernel developers strive to maintain a stable interface to user
+  space, the internal kernel API is in constant flux.  The lack of a stable
+  internal interface is a deliberate design decision; it allows fundamental
+  improvements to be made at any time and results in higher-quality code.
+  But one result of that policy is that any out-of-tree code requires
+  constant upkeep if it is to work with new kernels.  Maintaining
+  out-of-tree code requires significant amounts of work just to keep that
+  code working.
+
+  Code which is in the mainline, instead, does not require this work as the
+  result of a simple rule requiring any developer who makes an API change
+  to also fix any code that breaks as the result of that change.  So code
+  which has been merged into the mainline has significantly lower
+  maintenance costs.
+
+- Beyond that, code which is in the kernel will often be improved by other
+  developers.  Surprising results can come from empowering your user
+  community and customers to improve your product.
+
+- Kernel code is subjected to review, both before and after merging into
+  the mainline.  No matter how strong the original developer's skills are,
+  this review process invariably finds ways in which the code can be
+  improved.  Often review finds severe bugs and security problems.  This is
+  especially true for code which has been developed in a closed
+  environment; such code benefits strongly from review by outside
+  developers.  Out-of-tree code is lower-quality code.
+
+- Participation in the development process is your way to influence the
+  direction of kernel development.  Users who complain from the sidelines
+  are heard, but active developers have a stronger voice - and the ability
+  to implement changes which make the kernel work better for their needs.
+
+- When code is maintained separately, the possibility that a third party
+  will contribute a different implementation of a similar feature always
+  exists.  Should that happen, getting your code merged will become much
+  harder - to the point of impossibility.  Then you will be faced with the
+  unpleasant alternatives of either (1) maintaining a nonstandard feature
+  out of tree indefinitely, or (2) abandoning your code and migrating your
+  users over to the in-tree version.
+
+- Contribution of code is the fundamental action which makes the whole
+  process work.  By contributing your code you can add new functionality to
+  the kernel and provide capabilities and examples which are of use to
+  other kernel developers.  If you have developed code for Linux (or are
+  thinking about doing so), you clearly have an interest in the continued
+  success of this platform; contributing code is one of the best ways to
+  help ensure that success.
+
+All of the reasoning above applies to any out-of-tree kernel code,
+including code which is distributed in proprietary, binary-only form.
+There are, however, additional factors which should be taken into account
+before considering any sort of binary-only kernel code distribution.  These
+include:
+
+- The legal issues around the distribution of proprietary kernel modules
+  are cloudy at best; quite a few kernel copyright holders believe that
+  most binary-only modules are derived products of the kernel and that, as
+  a result, their distribution is a violation of the GNU General Public
+  license (about which more will be said below).  Your author is not a
+  lawyer, and nothing in this document can possibly be considered to be
+  legal advice.  The true legal status of closed-source modules can only be
+  determined by the courts.  But the uncertainty which haunts those modules
+  is there regardless.
+
+- Binary modules greatly increase the difficulty of debugging kernel
+  problems, to the point that most kernel developers will not even try.  So
+  the distribution of binary-only modules will make it harder for your
+  users to get support from the community.
+
+- Support is also harder for distributors of binary-only modules, who must
+  provide a version of the module for every distribution and every kernel
+  version they wish to support.  Dozens of builds of a single module can
+  be required to provide reasonably comprehensive coverage, and your users
+  will have to upgrade your module separately every time they upgrade their
+  kernel.
+
+- Everything that was said above about code review applies doubly to
+  closed-source code.  Since this code is not available at all, it cannot
+  have been reviewed by the community and will, beyond doubt, have serious
+  problems.
+
+Makers of embedded systems, in particular, may be tempted to disregard much
+of what has been said in this section in the belief that they are shipping
+a self-contained product which uses a frozen kernel version and requires no
+more development after its release.  This argument misses the value of
+widespread code review and the value of allowing your users to add
+capabilities to your product.  But these products, too, have a limited
+commercial life, after which a new version must be released.  At that
+point, vendors whose code is in the mainline and well maintained will be
+much better positioned to get the new product ready for market quickly.
+
+Licensing
+---------
+
+Code is contributed to the Linux kernel under a number of licenses, but all
+code must be compatible with version 2 of the GNU General Public License
+(GPLv2), which is the license covering the kernel distribution as a whole.
+In practice, that means that all code contributions are covered either by
+GPLv2 (with, optionally, language allowing distribution under later
+versions of the GPL) or the three-clause BSD license.  Any contributions
+which are not covered by a compatible license will not be accepted into the
+kernel.
+
+Copyright assignments are not required (or requested) for code contributed
+to the kernel.  All code merged into the mainline kernel retains its
+original ownership; as a result, the kernel now has thousands of owners.
+
+One implication of this ownership structure is that any attempt to change
+the licensing of the kernel is doomed to almost certain failure.  There are
+few practical scenarios where the agreement of all copyright holders could
+be obtained (or their code removed from the kernel).  So, in particular,
+there is no prospect of a migration to version 3 of the GPL in the
+foreseeable future.
+
+It is imperative that all code contributed to the kernel be legitimately
+free software.  For that reason, code from anonymous (or pseudonymous)
+contributors will not be accepted.  All contributors are required to "sign
+off" on their code, stating that the code can be distributed with the
+kernel under the GPL.  Code which has not been licensed as free software by
+its owner, or which risks creating copyright-related problems for the
+kernel (such as code which derives from reverse-engineering efforts lacking
+proper safeguards) cannot be contributed.
+
+Questions about copyright-related issues are common on Linux development
+mailing lists.  Such questions will normally receive no shortage of
+answers, but one should bear in mind that the people answering those
+questions are not lawyers and cannot provide legal advice.  If you have
+legal questions relating to Linux source code, there is no substitute for
+talking with a lawyer who understands this field.  Relying on answers
+obtained on technical mailing lists is a risky affair.
diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst
new file mode 100644
index 000000000..e05fb1b8f
--- /dev/null
+++ b/Documentation/process/2.Process.rst
@@ -0,0 +1,503 @@
+.. _development_process:
+
+How the development process works
+=================================
+
+Linux kernel development in the early 1990's was a pretty loose affair,
+with relatively small numbers of users and developers involved.  With a
+user base in the millions and with some 2,000 developers involved over the
+course of one year, the kernel has since had to evolve a number of
+processes to keep development happening smoothly.  A solid understanding of
+how the process works is required in order to be an effective part of it.
+
+The big picture
+---------------
+
+The kernel developers use a loosely time-based release process, with a new
+major kernel release happening every two or three months.  The recent
+release history looks like this:
+
+	======  =================
+	5.0	March 3, 2019
+	5.1	May 5, 2019
+	5.2	July 7, 2019
+	5.3	September 15, 2019
+	5.4	November 24, 2019
+	5.5	January 6, 2020
+	======  =================
+
+Every 5.x release is a major kernel release with new features, internal
+API changes, and more.  A typical release can contain about 13,000
+changesets with changes to several hundred thousand lines of code.  5.x is
+the leading edge of Linux kernel development; the kernel uses a
+rolling development model which is continually integrating major changes.
+
+A relatively straightforward discipline is followed with regard to the
+merging of patches for each release.  At the beginning of each development
+cycle, the "merge window" is said to be open.  At that time, code which is
+deemed to be sufficiently stable (and which is accepted by the development
+community) is merged into the mainline kernel.  The bulk of changes for a
+new development cycle (and all of the major changes) will be merged during
+this time, at a rate approaching 1,000 changes ("patches," or "changesets")
+per day.
+
+(As an aside, it is worth noting that the changes integrated during the
+merge window do not come out of thin air; they have been collected, tested,
+and staged ahead of time.  How that process works will be described in
+detail later on).
+
+The merge window lasts for approximately two weeks.  At the end of this
+time, Linus Torvalds will declare that the window is closed and release the
+first of the "rc" kernels.  For the kernel which is destined to be 5.6,
+for example, the release which happens at the end of the merge window will
+be called 5.6-rc1.  The -rc1 release is the signal that the time to
+merge new features has passed, and that the time to stabilize the next
+kernel has begun.
+
+Over the next six to ten weeks, only patches which fix problems should be
+submitted to the mainline.  On occasion a more significant change will be
+allowed, but such occasions are rare; developers who try to merge new
+features outside of the merge window tend to get an unfriendly reception.
+As a general rule, if you miss the merge window for a given feature, the
+best thing to do is to wait for the next development cycle.  (An occasional
+exception is made for drivers for previously-unsupported hardware; if they
+touch no in-tree code, they cannot cause regressions and should be safe to
+add at any time).
+
+As fixes make their way into the mainline, the patch rate will slow over
+time.  Linus releases new -rc kernels about once a week; a normal series
+will get up to somewhere between -rc6 and -rc9 before the kernel is
+considered to be sufficiently stable and the final release is made.
+At that point the whole process starts over again.
+
+As an example, here is how the 5.4 development cycle went (all dates in
+2019):
+
+	==============  ===============================
+	September 15	5.3 stable release
+	September 30	5.4-rc1, merge window closes
+	October 6	5.4-rc2
+	October 13	5.4-rc3
+	October 20	5.4-rc4
+	October 27	5.4-rc5
+	November 3	5.4-rc6
+	November 10	5.4-rc7
+	November 17	5.4-rc8
+	November 24	5.4 stable release
+	==============  ===============================
+
+How do the developers decide when to close the development cycle and create
+the stable release?  The most significant metric used is the list of
+regressions from previous releases.  No bugs are welcome, but those which
+break systems which worked in the past are considered to be especially
+serious.  For this reason, patches which cause regressions are looked upon
+unfavorably and are quite likely to be reverted during the stabilization
+period.
+
+The developers' goal is to fix all known regressions before the stable
+release is made.  In the real world, this kind of perfection is hard to
+achieve; there are just too many variables in a project of this size.
+There comes a point where delaying the final release just makes the problem
+worse; the pile of changes waiting for the next merge window will grow
+larger, creating even more regressions the next time around.  So most 5.x
+kernels go out with a handful of known regressions though, hopefully, none
+of them are serious.
+
+Once a stable release is made, its ongoing maintenance is passed off to the
+"stable team," currently Greg Kroah-Hartman. The stable team will release
+occasional updates to the stable release using the 5.x.y numbering scheme.
+To be considered for an update release, a patch must (1) fix a significant
+bug, and (2) already be merged into the mainline for the next development
+kernel. Kernels will typically receive stable updates for a little more
+than one development cycle past their initial release. So, for example, the
+5.2 kernel's history looked like this (all dates in 2019):
+
+	==============  ===============================
+	July 7		5.2 stable release
+	July 14		5.2.1
+	July 21		5.2.2
+	July 26		5.2.3
+	July 28		5.2.4
+	July 31  	5.2.5
+	...		...
+	October 11	5.2.21
+	==============  ===============================
+
+5.2.21 was the final stable update of the 5.2 release.
+
+Some kernels are designated "long term" kernels; they will receive support
+for a longer period.  As of this writing, the current long term kernels
+and their maintainers are:
+
+	======  ================================	=======================
+	3.16	Ben Hutchings				(very long-term kernel)
+	4.4	Greg Kroah-Hartman & Sasha Levin	(very long-term kernel)
+	4.9	Greg Kroah-Hartman & Sasha Levin
+	4.14	Greg Kroah-Hartman & Sasha Levin
+	4.19	Greg Kroah-Hartman & Sasha Levin
+	5.4	Greg Kroah-Hartman & Sasha Levin
+	======  ================================	=======================
+
+The selection of a kernel for long-term support is purely a matter of a
+maintainer having the need and the time to maintain that release.  There
+are no known plans for long-term support for any specific upcoming
+release.
+
+
+The lifecycle of a patch
+------------------------
+
+Patches do not go directly from the developer's keyboard into the mainline
+kernel.  There is, instead, a somewhat involved (if somewhat informal)
+process designed to ensure that each patch is reviewed for quality and that
+each patch implements a change which is desirable to have in the mainline.
+This process can happen quickly for minor fixes, or, in the case of large
+and controversial changes, go on for years.  Much developer frustration
+comes from a lack of understanding of this process or from attempts to
+circumvent it.
+
+In the hopes of reducing that frustration, this document will describe how
+a patch gets into the kernel.  What follows below is an introduction which
+describes the process in a somewhat idealized way.  A much more detailed
+treatment will come in later sections.
+
+The stages that a patch goes through are, generally:
+
+ - Design.  This is where the real requirements for the patch - and the way
+   those requirements will be met - are laid out.  Design work is often
+   done without involving the community, but it is better to do this work
+   in the open if at all possible; it can save a lot of time redesigning
+   things later.
+
+ - Early review.  Patches are posted to the relevant mailing list, and
+   developers on that list reply with any comments they may have.  This
+   process should turn up any major problems with a patch if all goes
+   well.
+
+ - Wider review.  When the patch is getting close to ready for mainline
+   inclusion, it should be accepted by a relevant subsystem maintainer -
+   though this acceptance is not a guarantee that the patch will make it
+   all the way to the mainline.  The patch will show up in the maintainer's
+   subsystem tree and into the -next trees (described below).  When the
+   process works, this step leads to more extensive review of the patch and
+   the discovery of any problems resulting from the integration of this
+   patch with work being done by others.
+
+-  Please note that most maintainers also have day jobs, so merging
+   your patch may not be their highest priority.  If your patch is
+   getting feedback about changes that are needed, you should either
+   make those changes or justify why they should not be made.  If your
+   patch has no review complaints but is not being merged by its
+   appropriate subsystem or driver maintainer, you should be persistent
+   in updating the patch to the current kernel so that it applies cleanly
+   and keep sending it for review and merging.
+
+ - Merging into the mainline.  Eventually, a successful patch will be
+   merged into the mainline repository managed by Linus Torvalds.  More
+   comments and/or problems may surface at this time; it is important that
+   the developer be responsive to these and fix any issues which arise.
+
+ - Stable release.  The number of users potentially affected by the patch
+   is now large, so, once again, new problems may arise.
+
+ - Long-term maintenance.  While it is certainly possible for a developer
+   to forget about code after merging it, that sort of behavior tends to
+   leave a poor impression in the development community.  Merging code
+   eliminates some of the maintenance burden, in that others will fix
+   problems caused by API changes.  But the original developer should
+   continue to take responsibility for the code if it is to remain useful
+   in the longer term.
+
+One of the largest mistakes made by kernel developers (or their employers)
+is to try to cut the process down to a single "merging into the mainline"
+step.  This approach invariably leads to frustration for everybody
+involved.
+
+How patches get into the Kernel
+-------------------------------
+
+There is exactly one person who can merge patches into the mainline kernel
+repository: Linus Torvalds. But, for example, of the over 9,500 patches
+which went into the 2.6.38 kernel, only 112 (around 1.3%) were directly
+chosen by Linus himself. The kernel project has long since grown to a size
+where no single developer could possibly inspect and select every patch
+unassisted. The way the kernel developers have addressed this growth is
+through the use of a lieutenant system built around a chain of trust.
+
+The kernel code base is logically broken down into a set of subsystems:
+networking, specific architecture support, memory management, video
+devices, etc.  Most subsystems have a designated maintainer, a developer
+who has overall responsibility for the code within that subsystem.  These
+subsystem maintainers are the gatekeepers (in a loose way) for the portion
+of the kernel they manage; they are the ones who will (usually) accept a
+patch for inclusion into the mainline kernel.
+
+Subsystem maintainers each manage their own version of the kernel source
+tree, usually (but certainly not always) using the git source management
+tool.  Tools like git (and related tools like quilt or mercurial) allow
+maintainers to track a list of patches, including authorship information
+and other metadata.  At any given time, the maintainer can identify which
+patches in his or her repository are not found in the mainline.
+
+When the merge window opens, top-level maintainers will ask Linus to "pull"
+the patches they have selected for merging from their repositories.  If
+Linus agrees, the stream of patches will flow up into his repository,
+becoming part of the mainline kernel.  The amount of attention that Linus
+pays to specific patches received in a pull operation varies.  It is clear
+that, sometimes, he looks quite closely.  But, as a general rule, Linus
+trusts the subsystem maintainers to not send bad patches upstream.
+
+Subsystem maintainers, in turn, can pull patches from other maintainers.
+For example, the networking tree is built from patches which accumulated
+first in trees dedicated to network device drivers, wireless networking,
+etc.  This chain of repositories can be arbitrarily long, though it rarely
+exceeds two or three links.  Since each maintainer in the chain trusts
+those managing lower-level trees, this process is known as the "chain of
+trust."
+
+Clearly, in a system like this, getting patches into the kernel depends on
+finding the right maintainer.  Sending patches directly to Linus is not
+normally the right way to go.
+
+
+Next trees
+----------
+
+The chain of subsystem trees guides the flow of patches into the kernel,
+but it also raises an interesting question: what if somebody wants to look
+at all of the patches which are being prepared for the next merge window?
+Developers will be interested in what other changes are pending to see
+whether there are any conflicts to worry about; a patch which changes a
+core kernel function prototype, for example, will conflict with any other
+patches which use the older form of that function.  Reviewers and testers
+want access to the changes in their integrated form before all of those
+changes land in the mainline kernel.  One could pull changes from all of
+the interesting subsystem trees, but that would be a big and error-prone
+job.
+
+The answer comes in the form of -next trees, where subsystem trees are
+collected for testing and review.  The older of these trees, maintained by
+Andrew Morton, is called "-mm" (for memory management, which is how it got
+started).  The -mm tree integrates patches from a long list of subsystem
+trees; it also has some patches aimed at helping with debugging.
+
+Beyond that, -mm contains a significant collection of patches which have
+been selected by Andrew directly.  These patches may have been posted on a
+mailing list, or they may apply to a part of the kernel for which there is
+no designated subsystem tree.  As a result, -mm operates as a sort of
+subsystem tree of last resort; if there is no other obvious path for a
+patch into the mainline, it is likely to end up in -mm.  Miscellaneous
+patches which accumulate in -mm will eventually either be forwarded on to
+an appropriate subsystem tree or be sent directly to Linus.  In a typical
+development cycle, approximately 5-10% of the patches going into the
+mainline get there via -mm.
+
+The current -mm patch is available in the "mmotm" (-mm of the moment)
+directory at:
+
+	https://www.ozlabs.org/~akpm/mmotm/
+
+Use of the MMOTM tree is likely to be a frustrating experience, though;
+there is a definite chance that it will not even compile.
+
+The primary tree for next-cycle patch merging is linux-next, maintained by
+Stephen Rothwell.  The linux-next tree is, by design, a snapshot of what
+the mainline is expected to look like after the next merge window closes.
+Linux-next trees are announced on the linux-kernel and linux-next mailing
+lists when they are assembled; they can be downloaded from:
+
+	https://www.kernel.org/pub/linux/kernel/next/
+
+Linux-next has become an integral part of the kernel development process;
+all patches merged during a given merge window should really have found
+their way into linux-next some time before the merge window opens.
+
+
+Staging trees
+-------------
+
+The kernel source tree contains the drivers/staging/ directory, where
+many sub-directories for drivers or filesystems that are on their way to
+being added to the kernel tree live.  They remain in drivers/staging while
+they still need more work; once complete, they can be moved into the
+kernel proper.  This is a way to keep track of drivers that aren't
+up to Linux kernel coding or quality standards, but people may want to use
+them and track development.
+
+Greg Kroah-Hartman currently maintains the staging tree.  Drivers that
+still need work are sent to him, with each driver having its own
+subdirectory in drivers/staging/.  Along with the driver source files, a
+TODO file should be present in the directory as well.  The TODO file lists
+the pending work that the driver needs for acceptance into the kernel
+proper, as well as a list of people that should be Cc'd for any patches to
+the driver.  Current rules require that drivers contributed to staging
+must, at a minimum, compile properly.
+
+Staging can be a relatively easy way to get new drivers into the mainline
+where, with luck, they will come to the attention of other developers and
+improve quickly.  Entry into staging is not the end of the story, though;
+code in staging which is not seeing regular progress will eventually be
+removed.  Distributors also tend to be relatively reluctant to enable
+staging drivers.  So staging is, at best, a stop on the way toward becoming
+a proper mainline driver.
+
+
+Tools
+-----
+
+As can be seen from the above text, the kernel development process depends
+heavily on the ability to herd collections of patches in various
+directions.  The whole thing would not work anywhere near as well as it
+does without suitably powerful tools.  Tutorials on how to use these tools
+are well beyond the scope of this document, but there is space for a few
+pointers.
+
+By far the dominant source code management system used by the kernel
+community is git.  Git is one of a number of distributed version control
+systems being developed in the free software community.  It is well tuned
+for kernel development, in that it performs quite well when dealing with
+large repositories and large numbers of patches.  It also has a reputation
+for being difficult to learn and use, though it has gotten better over
+time.  Some sort of familiarity with git is almost a requirement for kernel
+developers; even if they do not use it for their own work, they'll need git
+to keep up with what other developers (and the mainline) are doing.
+
+Git is now packaged by almost all Linux distributions.  There is a home
+page at:
+
+	https://git-scm.com/
+
+That page has pointers to documentation and tutorials.
+
+Among the kernel developers who do not use git, the most popular choice is
+almost certainly Mercurial:
+
+	https://www.selenic.com/mercurial/
+
+Mercurial shares many features with git, but it provides an interface which
+many find easier to use.
+
+The other tool worth knowing about is Quilt:
+
+	https://savannah.nongnu.org/projects/quilt/
+
+Quilt is a patch management system, rather than a source code management
+system.  It does not track history over time; it is, instead, oriented
+toward tracking a specific set of changes against an evolving code base.
+Some major subsystem maintainers use quilt to manage patches intended to go
+upstream.  For the management of certain kinds of trees (-mm, for example),
+quilt is the best tool for the job.
+
+
+Mailing lists
+-------------
+
+A great deal of Linux kernel development work is done by way of mailing
+lists.  It is hard to be a fully-functioning member of the community
+without joining at least one list somewhere.  But Linux mailing lists also
+represent a potential hazard to developers, who risk getting buried under a
+load of electronic mail, running afoul of the conventions used on the Linux
+lists, or both.
+
+Most kernel mailing lists are run on vger.kernel.org; the master list can
+be found at:
+
+	http://vger.kernel.org/vger-lists.html
+
+There are lists hosted elsewhere, though; a number of them are at
+redhat.com/mailman/listinfo.
+
+The core mailing list for kernel development is, of course, linux-kernel.
+This list is an intimidating place to be; volume can reach 500 messages per
+day, the amount of noise is high, the conversation can be severely
+technical, and participants are not always concerned with showing a high
+degree of politeness.  But there is no other place where the kernel
+development community comes together as a whole; developers who avoid this
+list will miss important information.
+
+There are a few hints which can help with linux-kernel survival:
+
+- Have the list delivered to a separate folder, rather than your main
+  mailbox.  One must be able to ignore the stream for sustained periods of
+  time.
+
+- Do not try to follow every conversation - nobody else does.  It is
+  important to filter on both the topic of interest (though note that
+  long-running conversations can drift away from the original subject
+  without changing the email subject line) and the people who are
+  participating.
+
+- Do not feed the trolls.  If somebody is trying to stir up an angry
+  response, ignore them.
+
+- When responding to linux-kernel email (or that on other lists) preserve
+  the Cc: header for all involved.  In the absence of a strong reason (such
+  as an explicit request), you should never remove recipients.  Always make
+  sure that the person you are responding to is in the Cc: list.  This
+  convention also makes it unnecessary to explicitly ask to be copied on
+  replies to your postings.
+
+- Search the list archives (and the net as a whole) before asking
+  questions.  Some developers can get impatient with people who clearly
+  have not done their homework.
+
+- Avoid top-posting (the practice of putting your answer above the quoted
+  text you are responding to).  It makes your response harder to read and
+  makes a poor impression.
+
+- Ask on the correct mailing list.  Linux-kernel may be the general meeting
+  point, but it is not the best place to find developers from all
+  subsystems.
+
+The last point - finding the correct mailing list - is a common place for
+beginning developers to go wrong.  Somebody who asks a networking-related
+question on linux-kernel will almost certainly receive a polite suggestion
+to ask on the netdev list instead, as that is the list frequented by most
+networking developers.  Other lists exist for the SCSI, video4linux, IDE,
+filesystem, etc. subsystems.  The best place to look for mailing lists is
+in the MAINTAINERS file packaged with the kernel source.
+
+
+Getting started with Kernel development
+---------------------------------------
+
+Questions about how to get started with the kernel development process are
+common - from both individuals and companies.  Equally common are missteps
+which make the beginning of the relationship harder than it has to be.
+
+Companies often look to hire well-known developers to get a development
+group started.  This can, in fact, be an effective technique.  But it also
+tends to be expensive and does not do much to grow the pool of experienced
+kernel developers.  It is possible to bring in-house developers up to speed
+on Linux kernel development, given the investment of a bit of time.  Taking
+this time can endow an employer with a group of developers who understand
+the kernel and the company both, and who can help to train others as well.
+Over the medium term, this is often the more profitable approach.
+
+Individual developers are often, understandably, at a loss for a place to
+start.  Beginning with a large project can be intimidating; one often wants
+to test the waters with something smaller first.  This is the point where
+some developers jump into the creation of patches fixing spelling errors or
+minor coding style issues.  Unfortunately, such patches create a level of
+noise which is distracting for the development community as a whole, so,
+increasingly, they are looked down upon.  New developers wishing to
+introduce themselves to the community will not get the sort of reception
+they wish for by these means.
+
+Andrew Morton gives this advice for aspiring kernel developers
+
+::
+
+	The #1 project for all kernel beginners should surely be "make sure
+	that the kernel runs perfectly at all times on all machines which
+	you can lay your hands on".  Usually the way to do this is to work
+	with others on getting things fixed up (this can require
+	persistence!) but that's fine - it's a part of kernel development.
+
+(https://lwn.net/Articles/283982/).
+
+In the absence of obvious problems to fix, developers are advised to look
+at the current lists of regressions and open bugs in general.  There is
+never any shortage of issues in need of fixing; by addressing these issues,
+developers will gain experience with the process while, at the same time,
+building respect with the rest of the development community.
diff --git a/Documentation/process/3.Early-stage.rst b/Documentation/process/3.Early-stage.rst
new file mode 100644
index 000000000..6bfd60d77
--- /dev/null
+++ b/Documentation/process/3.Early-stage.rst
@@ -0,0 +1,222 @@
+.. _development_early_stage:
+
+Early-stage planning
+====================
+
+When contemplating a Linux kernel development project, it can be tempting
+to jump right in and start coding.  As with any significant project,
+though, much of the groundwork for success is best laid before the first
+line of code is written.  Some time spent in early planning and
+communication can save far more time later on.
+
+
+Specifying the problem
+----------------------
+
+Like any engineering project, a successful kernel enhancement starts with a
+clear description of the problem to be solved.  In some cases, this step is
+easy: when a driver is needed for a specific piece of hardware, for
+example.  In others, though, it is tempting to confuse the real problem
+with the proposed solution, and that can lead to difficulties.
+
+Consider an example: some years ago, developers working with Linux audio
+sought a way to run applications without dropouts or other artifacts caused
+by excessive latency in the system.  The solution they arrived at was a
+kernel module intended to hook into the Linux Security Module (LSM)
+framework; this module could be configured to give specific applications
+access to the realtime scheduler.  This module was implemented and sent to
+the linux-kernel mailing list, where it immediately ran into problems.
+
+To the audio developers, this security module was sufficient to solve their
+immediate problem.  To the wider kernel community, though, it was seen as a
+misuse of the LSM framework (which is not intended to confer privileges
+onto processes which they would not otherwise have) and a risk to system
+stability.  Their preferred solutions involved realtime scheduling access
+via the rlimit mechanism for the short term, and ongoing latency reduction
+work in the long term.
+
+The audio community, however, could not see past the particular solution
+they had implemented; they were unwilling to accept alternatives.  The
+resulting disagreement left those developers feeling disillusioned with the
+entire kernel development process; one of them went back to an audio list
+and posted this:
+
+	There are a number of very good Linux kernel developers, but they
+	tend to get outshouted by a large crowd of arrogant fools. Trying
+	to communicate user requirements to these people is a waste of
+	time. They are much too "intelligent" to listen to lesser mortals.
+
+(https://lwn.net/Articles/131776/).
+
+The reality of the situation was different; the kernel developers were far
+more concerned about system stability, long-term maintenance, and finding
+the right solution to the problem than they were with a specific module.
+The moral of the story is to focus on the problem - not a specific solution
+- and to discuss it with the development community before investing in the
+creation of a body of code.
+
+So, when contemplating a kernel development project, one should obtain
+answers to a short set of questions:
+
+ - What, exactly, is the problem which needs to be solved?
+
+ - Who are the users affected by this problem?  Which use cases should the
+   solution address?
+
+ - How does the kernel fall short in addressing that problem now?
+
+Only then does it make sense to start considering possible solutions.
+
+
+Early discussion
+----------------
+
+When planning a kernel development project, it makes great sense to hold
+discussions with the community before launching into implementation.  Early
+communication can save time and trouble in a number of ways:
+
+ - It may well be that the problem is addressed by the kernel in ways which
+   you have not understood.  The Linux kernel is large and has a number of
+   features and capabilities which are not immediately obvious.  Not all
+   kernel capabilities are documented as well as one might like, and it is
+   easy to miss things.  Your author has seen the posting of a complete
+   driver which duplicated an existing driver that the new author had been
+   unaware of.  Code which reinvents existing wheels is not only wasteful;
+   it will also not be accepted into the mainline kernel.
+
+ - There may be elements of the proposed solution which will not be
+   acceptable for mainline merging.  It is better to find out about
+   problems like this before writing the code.
+
+ - It's entirely possible that other developers have thought about the
+   problem; they may have ideas for a better solution, and may be willing
+   to help in the creation of that solution.
+
+Years of experience with the kernel development community have taught a
+clear lesson: kernel code which is designed and developed behind closed
+doors invariably has problems which are only revealed when the code is
+released into the community.  Sometimes these problems are severe,
+requiring months or years of effort before the code can be brought up to
+the kernel community's standards.  Some examples include:
+
+ - The Devicescape network stack was designed and implemented for
+   single-processor systems.  It could not be merged into the mainline
+   until it was made suitable for multiprocessor systems.  Retrofitting
+   locking and such into code is a difficult task; as a result, the merging
+   of this code (now called mac80211) was delayed for over a year.
+
+ - The Reiser4 filesystem included a number of capabilities which, in the
+   core kernel developers' opinion, should have been implemented in the
+   virtual filesystem layer instead.  It also included features which could
+   not easily be implemented without exposing the system to user-caused
+   deadlocks.  The late revelation of these problems - and refusal to
+   address some of them - has caused Reiser4 to stay out of the mainline
+   kernel.
+
+ - The AppArmor security module made use of internal virtual filesystem
+   data structures in ways which were considered to be unsafe and
+   unreliable.  This concern (among others) kept AppArmor out of the
+   mainline for years.
+
+In each of these cases, a great deal of pain and extra work could have been
+avoided with some early discussion with the kernel developers.
+
+
+Who do you talk to?
+-------------------
+
+When developers decide to take their plans public, the next question will
+be: where do we start?  The answer is to find the right mailing list(s) and
+the right maintainer.  For mailing lists, the best approach is to look in
+the MAINTAINERS file for a relevant place to post.  If there is a suitable
+subsystem list, posting there is often preferable to posting on
+linux-kernel; you are more likely to reach developers with expertise in the
+relevant subsystem and the environment may be more supportive.
+
+Finding maintainers can be a bit harder.  Again, the MAINTAINERS file is
+the place to start.  That file tends to not always be up to date, though,
+and not all subsystems are represented there.  The person listed in the
+MAINTAINERS file may, in fact, not be the person who is actually acting in
+that role currently.  So, when there is doubt about who to contact, a
+useful trick is to use git (and "git log" in particular) to see who is
+currently active within the subsystem of interest.  Look at who is writing
+patches, and who, if anybody, is attaching Signed-off-by lines to those
+patches.  Those are the people who will be best placed to help with a new
+development project.
+
+The task of finding the right maintainer is sometimes challenging enough
+that the kernel developers have added a script to ease the process:
+
+::
+
+	.../scripts/get_maintainer.pl
+
+This script will return the current maintainer(s) for a given file or
+directory when given the "-f" option.  If passed a patch on the
+command line, it will list the maintainers who should probably receive
+copies of the patch.  There are a number of options regulating how hard
+get_maintainer.pl will search for maintainers; please be careful about
+using the more aggressive options as you may end up including developers
+who have no real interest in the code you are modifying.
+
+If all else fails, talking to Andrew Morton can be an effective way to
+track down a maintainer for a specific piece of code.
+
+
+When to post?
+-------------
+
+If possible, posting your plans during the early stages can only be
+helpful.  Describe the problem being solved and any plans that have been
+made on how the implementation will be done.  Any information you can
+provide can help the development community provide useful input on the
+project.
+
+One discouraging thing which can happen at this stage is not a hostile
+reaction, but, instead, little or no reaction at all.  The sad truth of the
+matter is (1) kernel developers tend to be busy, (2) there is no shortage
+of people with grand plans and little code (or even prospect of code) to
+back them up, and (3) nobody is obligated to review or comment on ideas
+posted by others.  Beyond that, high-level designs often hide problems
+which are only revealed when somebody actually tries to implement those
+designs; for that reason, kernel developers would rather see the code.
+
+If a request-for-comments posting yields little in the way of comments, do
+not assume that it means there is no interest in the project.
+Unfortunately, you also cannot assume that there are no problems with your
+idea.  The best thing to do in this situation is to proceed, keeping the
+community informed as you go.
+
+
+Getting official buy-in
+-----------------------
+
+If your work is being done in a corporate environment - as most Linux
+kernel work is - you must, obviously, have permission from suitably
+empowered managers before you can post your company's plans or code to a
+public mailing list.  The posting of code which has not been cleared for
+release under a GPL-compatible license can be especially problematic; the
+sooner that a company's management and legal staff can agree on the posting
+of a kernel development project, the better off everybody involved will be.
+
+Some readers may be thinking at this point that their kernel work is
+intended to support a product which does not yet have an officially
+acknowledged existence.  Revealing their employer's plans on a public
+mailing list may not be a viable option.  In cases like this, it is worth
+considering whether the secrecy is really necessary; there is often no real
+need to keep development plans behind closed doors.
+
+That said, there are also cases where a company legitimately cannot
+disclose its plans early in the development process.  Companies with
+experienced kernel developers may choose to proceed in an open-loop manner
+on the assumption that they will be able to avoid serious integration
+problems later.  For companies without that sort of in-house expertise, the
+best option is often to hire an outside developer to review the plans under
+a non-disclosure agreement.  The Linux Foundation operates an NDA program
+designed to help with this sort of situation; more information can be found
+at:
+
+    https://www.linuxfoundation.org/nda/
+
+This kind of review is often enough to avoid serious problems later on
+without requiring public disclosure of the project.
diff --git a/Documentation/process/4.Coding.rst b/Documentation/process/4.Coding.rst
new file mode 100644
index 000000000..c27e59d2f
--- /dev/null
+++ b/Documentation/process/4.Coding.rst
@@ -0,0 +1,423 @@
+.. _development_coding:
+
+Getting the code right
+======================
+
+While there is much to be said for a solid and community-oriented design
+process, the proof of any kernel development project is in the resulting
+code.  It is the code which will be examined by other developers and merged
+(or not) into the mainline tree.  So it is the quality of this code which
+will determine the ultimate success of the project.
+
+This section will examine the coding process.  We'll start with a look at a
+number of ways in which kernel developers can go wrong.  Then the focus
+will shift toward doing things right and the tools which can help in that
+quest.
+
+
+Pitfalls
+---------
+
+Coding style
+************
+
+The kernel has long had a standard coding style, described in
+:ref:`Documentation/process/coding-style.rst <codingstyle>`.  For much of
+that time, the policies described in that file were taken as being, at most,
+advisory.  As a result, there is a substantial amount of code in the kernel
+which does not meet the coding style guidelines.  The presence of that code
+leads to two independent hazards for kernel developers.
+
+The first of these is to believe that the kernel coding standards do not
+matter and are not enforced.  The truth of the matter is that adding new
+code to the kernel is very difficult if that code is not coded according to
+the standard; many developers will request that the code be reformatted
+before they will even review it.  A code base as large as the kernel
+requires some uniformity of code to make it possible for developers to
+quickly understand any part of it.  So there is no longer room for
+strangely-formatted code.
+
+Occasionally, the kernel's coding style will run into conflict with an
+employer's mandated style.  In such cases, the kernel's style will have to
+win before the code can be merged.  Putting code into the kernel means
+giving up a degree of control in a number of ways - including control over
+how the code is formatted.
+
+The other trap is to assume that code which is already in the kernel is
+urgently in need of coding style fixes.  Developers may start to generate
+reformatting patches as a way of gaining familiarity with the process, or
+as a way of getting their name into the kernel changelogs - or both.  But
+pure coding style fixes are seen as noise by the development community;
+they tend to get a chilly reception.  So this type of patch is best
+avoided.  It is natural to fix the style of a piece of code while working
+on it for other reasons, but coding style changes should not be made for
+their own sake.
+
+The coding style document also should not be read as an absolute law which
+can never be transgressed.  If there is a good reason to go against the
+style (a line which becomes far less readable if split to fit within the
+80-column limit, for example), just do it.
+
+Note that you can also use the ``clang-format`` tool to help you with
+these rules, to quickly re-format parts of your code automatically,
+and to review full files in order to spot coding style mistakes,
+typos and possible improvements. It is also handy for sorting ``#includes``,
+for aligning variables/macros, for reflowing text and other similar tasks.
+See the file :ref:`Documentation/process/clang-format.rst <clangformat>`
+for more details.
+
+
+Abstraction layers
+******************
+
+Computer Science professors teach students to make extensive use of
+abstraction layers in the name of flexibility and information hiding.
+Certainly the kernel makes extensive use of abstraction; no project
+involving several million lines of code could do otherwise and survive.
+But experience has shown that excessive or premature abstraction can be
+just as harmful as premature optimization.  Abstraction should be used to
+the level required and no further.
+
+At a simple level, consider a function which has an argument which is
+always passed as zero by all callers.  One could retain that argument just
+in case somebody eventually needs to use the extra flexibility that it
+provides.  By that time, though, chances are good that the code which
+implements this extra argument has been broken in some subtle way which was
+never noticed - because it has never been used.  Or, when the need for
+extra flexibility arises, it does not do so in a way which matches the
+programmer's early expectation.  Kernel developers will routinely submit
+patches to remove unused arguments; they should, in general, not be added
+in the first place.
+
+Abstraction layers which hide access to hardware - often to allow the bulk
+of a driver to be used with multiple operating systems - are especially
+frowned upon.  Such layers obscure the code and may impose a performance
+penalty; they do not belong in the Linux kernel.
+
+On the other hand, if you find yourself copying significant amounts of code
+from another kernel subsystem, it is time to ask whether it would, in fact,
+make sense to pull out some of that code into a separate library or to
+implement that functionality at a higher level.  There is no value in
+replicating the same code throughout the kernel.
+
+
+#ifdef and preprocessor use in general
+**************************************
+
+The C preprocessor seems to present a powerful temptation to some C
+programmers, who see it as a way to efficiently encode a great deal of
+flexibility into a source file.  But the preprocessor is not C, and heavy
+use of it results in code which is much harder for others to read and
+harder for the compiler to check for correctness.  Heavy preprocessor use
+is almost always a sign of code which needs some cleanup work.
+
+Conditional compilation with #ifdef is, indeed, a powerful feature, and it
+is used within the kernel.  But there is little desire to see code which is
+sprinkled liberally with #ifdef blocks.  As a general rule, #ifdef use
+should be confined to header files whenever possible.
+Conditionally-compiled code can be confined to functions which, if the code
+is not to be present, simply become empty.  The compiler will then quietly
+optimize out the call to the empty function.  The result is far cleaner
+code which is easier to follow.
+
+C preprocessor macros present a number of hazards, including possible
+multiple evaluation of expressions with side effects and no type safety.
+If you are tempted to define a macro, consider creating an inline function
+instead.  The code which results will be the same, but inline functions are
+easier to read, do not evaluate their arguments multiple times, and allow
+the compiler to perform type checking on the arguments and return value.
+
+
+Inline functions
+****************
+
+Inline functions present a hazard of their own, though.  Programmers can
+become enamored of the perceived efficiency inherent in avoiding a function
+call and fill a source file with inline functions.  Those functions,
+however, can actually reduce performance.  Since their code is replicated
+at each call site, they end up bloating the size of the compiled kernel.
+That, in turn, creates pressure on the processor's memory caches, which can
+slow execution dramatically.  Inline functions, as a rule, should be quite
+small and relatively rare.  The cost of a function call, after all, is not
+that high; the creation of large numbers of inline functions is a classic
+example of premature optimization.
+
+In general, kernel programmers ignore cache effects at their peril.  The
+classic time/space tradeoff taught in beginning data structures classes
+often does not apply to contemporary hardware.  Space *is* time, in that a
+larger program will run slower than one which is more compact.
+
+More recent compilers take an increasingly active role in deciding whether
+a given function should actually be inlined or not.  So the liberal
+placement of "inline" keywords may not just be excessive; it could also be
+irrelevant.
+
+
+Locking
+*******
+
+In May, 2006, the "Devicescape" networking stack was, with great
+fanfare, released under the GPL and made available for inclusion in the
+mainline kernel.  This donation was welcome news; support for wireless
+networking in Linux was considered substandard at best, and the Devicescape
+stack offered the promise of fixing that situation.  Yet, this code did not
+actually make it into the mainline until June, 2007 (2.6.22).  What
+happened?
+
+This code showed a number of signs of having been developed behind
+corporate doors.  But one large problem in particular was that it was not
+designed to work on multiprocessor systems.  Before this networking stack
+(now called mac80211) could be merged, a locking scheme needed to be
+retrofitted onto it.
+
+Once upon a time, Linux kernel code could be developed without thinking
+about the concurrency issues presented by multiprocessor systems.  Now,
+however, this document is being written on a dual-core laptop.  Even on
+single-processor systems, work being done to improve responsiveness will
+raise the level of concurrency within the kernel.  The days when kernel
+code could be written without thinking about locking are long past.
+
+Any resource (data structures, hardware registers, etc.) which could be
+accessed concurrently by more than one thread must be protected by a lock.
+New code should be written with this requirement in mind; retrofitting
+locking after the fact is a rather more difficult task.  Kernel developers
+should take the time to understand the available locking primitives well
+enough to pick the right tool for the job.  Code which shows a lack of
+attention to concurrency will have a difficult path into the mainline.
+
+
+Regressions
+***********
+
+One final hazard worth mentioning is this: it can be tempting to make a
+change (which may bring big improvements) which causes something to break
+for existing users.  This kind of change is called a "regression," and
+regressions have become most unwelcome in the mainline kernel.  With few
+exceptions, changes which cause regressions will be backed out if the
+regression cannot be fixed in a timely manner.  Far better to avoid the
+regression in the first place.
+
+It is often argued that a regression can be justified if it causes things
+to work for more people than it creates problems for.  Why not make a
+change if it brings new functionality to ten systems for each one it
+breaks?  The best answer to this question was expressed by Linus in July,
+2007:
+
+::
+
+	So we don't fix bugs by introducing new problems.  That way lies
+	madness, and nobody ever knows if you actually make any real
+	progress at all. Is it two steps forwards, one step back, or one
+	step forward and two steps back?
+
+(https://lwn.net/Articles/243460/).
+
+An especially unwelcome type of regression is any sort of change to the
+user-space ABI.  Once an interface has been exported to user space, it must
+be supported indefinitely.  This fact makes the creation of user-space
+interfaces particularly challenging: since they cannot be changed in
+incompatible ways, they must be done right the first time.  For this
+reason, a great deal of thought, clear documentation, and wide review for
+user-space interfaces is always required.
+
+
+Code checking tools
+-------------------
+
+For now, at least, the writing of error-free code remains an ideal that few
+of us can reach.  What we can hope to do, though, is to catch and fix as
+many of those errors as possible before our code goes into the mainline
+kernel.  To that end, the kernel developers have put together an impressive
+array of tools which can catch a wide variety of obscure problems in an
+automated way.  Any problem caught by the computer is a problem which will
+not afflict a user later on, so it stands to reason that the automated
+tools should be used whenever possible.
+
+The first step is simply to heed the warnings produced by the compiler.
+Contemporary versions of gcc can detect (and warn about) a large number of
+potential errors.  Quite often, these warnings point to real problems.
+Code submitted for review should, as a rule, not produce any compiler
+warnings.  When silencing warnings, take care to understand the real cause
+and try to avoid "fixes" which make the warning go away without addressing
+its cause.
+
+Note that not all compiler warnings are enabled by default.  Build the
+kernel with "make EXTRA_CFLAGS=-W" to get the full set.
+
+The kernel provides several configuration options which turn on debugging
+features; most of these are found in the "kernel hacking" submenu.  Several
+of these options should be turned on for any kernel used for development or
+testing purposes.  In particular, you should turn on:
+
+ - ENABLE_MUST_CHECK and FRAME_WARN to get an
+   extra set of warnings for problems like the use of deprecated interfaces
+   or ignoring an important return value from a function.  The output
+   generated by these warnings can be verbose, but one need not worry about
+   warnings from other parts of the kernel.
+
+ - DEBUG_OBJECTS will add code to track the lifetime of various objects
+   created by the kernel and warn when things are done out of order.  If
+   you are adding a subsystem which creates (and exports) complex objects
+   of its own, consider adding support for the object debugging
+   infrastructure.
+
+ - DEBUG_SLAB can find a variety of memory allocation and use errors; it
+   should be used on most development kernels.
+
+ - DEBUG_SPINLOCK, DEBUG_ATOMIC_SLEEP, and DEBUG_MUTEXES will find a
+   number of common locking errors.
+
+There are quite a few other debugging options, some of which will be
+discussed below.  Some of them have a significant performance impact and
+should not be used all of the time.  But some time spent learning the
+available options will likely be paid back many times over in short order.
+
+One of the heavier debugging tools is the locking checker, or "lockdep."
+This tool will track the acquisition and release of every lock (spinlock or
+mutex) in the system, the order in which locks are acquired relative to
+each other, the current interrupt environment, and more.  It can then
+ensure that locks are always acquired in the same order, that the same
+interrupt assumptions apply in all situations, and so on.  In other words,
+lockdep can find a number of scenarios in which the system could, on rare
+occasion, deadlock.  This kind of problem can be painful (for both
+developers and users) in a deployed system; lockdep allows them to be found
+in an automated manner ahead of time.  Code with any sort of non-trivial
+locking should be run with lockdep enabled before being submitted for
+inclusion.
+
+As a diligent kernel programmer, you will, beyond doubt, check the return
+status of any operation (such as a memory allocation) which can fail.  The
+fact of the matter, though, is that the resulting failure recovery paths
+are, probably, completely untested.  Untested code tends to be broken code;
+you could be much more confident of your code if all those error-handling
+paths had been exercised a few times.
+
+The kernel provides a fault injection framework which can do exactly that,
+especially where memory allocations are involved.  With fault injection
+enabled, a configurable percentage of memory allocations will be made to
+fail; these failures can be restricted to a specific range of code.
+Running with fault injection enabled allows the programmer to see how the
+code responds when things go badly.  See
+Documentation/fault-injection/fault-injection.rst for more information on
+how to use this facility.
+
+Other kinds of errors can be found with the "sparse" static analysis tool.
+With sparse, the programmer can be warned about confusion between
+user-space and kernel-space addresses, mixture of big-endian and
+small-endian quantities, the passing of integer values where a set of bit
+flags is expected, and so on.  Sparse must be installed separately (it can
+be found at https://sparse.wiki.kernel.org/index.php/Main_Page if your
+distributor does not package it); it can then be run on the code by adding
+"C=1" to your make command.
+
+The "Coccinelle" tool (http://coccinelle.lip6.fr/) is able to find a wide
+variety of potential coding problems; it can also propose fixes for those
+problems.  Quite a few "semantic patches" for the kernel have been packaged
+under the scripts/coccinelle directory; running "make coccicheck" will run
+through those semantic patches and report on any problems found.  See
+:ref:`Documentation/dev-tools/coccinelle.rst <devtools_coccinelle>`
+for more information.
+
+Other kinds of portability errors are best found by compiling your code for
+other architectures.  If you do not happen to have an S/390 system or a
+Blackfin development board handy, you can still perform the compilation
+step.  A large set of cross compilers for x86 systems can be found at
+
+	https://www.kernel.org/pub/tools/crosstool/
+
+Some time spent installing and using these compilers will help avoid
+embarrassment later.
+
+
+Documentation
+-------------
+
+Documentation has often been more the exception than the rule with kernel
+development.  Even so, adequate documentation will help to ease the merging
+of new code into the kernel, make life easier for other developers, and
+will be helpful for your users.  In many cases, the addition of
+documentation has become essentially mandatory.
+
+The first piece of documentation for any patch is its associated
+changelog.  Log entries should describe the problem being solved, the form
+of the solution, the people who worked on the patch, any relevant
+effects on performance, and anything else that might be needed to
+understand the patch.  Be sure that the changelog says *why* the patch is
+worth applying; a surprising number of developers fail to provide that
+information.
+
+Any code which adds a new user-space interface - including new sysfs or
+/proc files - should include documentation of that interface which enables
+user-space developers to know what they are working with.  See
+Documentation/ABI/README for a description of how this documentation should
+be formatted and what information needs to be provided.
+
+The file :ref:`Documentation/admin-guide/kernel-parameters.rst
+<kernelparameters>` describes all of the kernel's boot-time parameters.
+Any patch which adds new parameters should add the appropriate entries to
+this file.
+
+Any new configuration options must be accompanied by help text which
+clearly explains the options and when the user might want to select them.
+
+Internal API information for many subsystems is documented by way of
+specially-formatted comments; these comments can be extracted and formatted
+in a number of ways by the "kernel-doc" script.  If you are working within
+a subsystem which has kerneldoc comments, you should maintain them and add
+them, as appropriate, for externally-available functions.  Even in areas
+which have not been so documented, there is no harm in adding kerneldoc
+comments for the future; indeed, this can be a useful activity for
+beginning kernel developers.  The format of these comments, along with some
+information on how to create kerneldoc templates can be found at
+:ref:`Documentation/doc-guide/ <doc_guide>`.
+
+Anybody who reads through a significant amount of existing kernel code will
+note that, often, comments are most notable by their absence.  Once again,
+the expectations for new code are higher than they were in the past;
+merging uncommented code will be harder.  That said, there is little desire
+for verbosely-commented code.  The code should, itself, be readable, with
+comments explaining the more subtle aspects.
+
+Certain things should always be commented.  Uses of memory barriers should
+be accompanied by a line explaining why the barrier is necessary.  The
+locking rules for data structures generally need to be explained somewhere.
+Major data structures need comprehensive documentation in general.
+Non-obvious dependencies between separate bits of code should be pointed
+out.  Anything which might tempt a code janitor to make an incorrect
+"cleanup" needs a comment saying why it is done the way it is.  And so on.
+
+
+Internal API changes
+--------------------
+
+The binary interface provided by the kernel to user space cannot be broken
+except under the most severe circumstances.  The kernel's internal
+programming interfaces, instead, are highly fluid and can be changed when
+the need arises.  If you find yourself having to work around a kernel API,
+or simply not using a specific functionality because it does not meet your
+needs, that may be a sign that the API needs to change.  As a kernel
+developer, you are empowered to make such changes.
+
+There are, of course, some catches.  API changes can be made, but they need
+to be well justified.  So any patch making an internal API change should be
+accompanied by a description of what the change is and why it is
+necessary.  This kind of change should also be broken out into a separate
+patch, rather than buried within a larger patch.
+
+The other catch is that a developer who changes an internal API is
+generally charged with the task of fixing any code within the kernel tree
+which is broken by the change.  For a widely-used function, this duty can
+lead to literally hundreds or thousands of changes - many of which are
+likely to conflict with work being done by other developers.  Needless to
+say, this can be a large job, so it is best to be sure that the
+justification is solid.  Note that the Coccinelle tool can help with
+wide-ranging API changes.
+
+When making an incompatible API change, one should, whenever possible,
+ensure that code which has not been updated is caught by the compiler.
+This will help you to be sure that you have found all in-tree uses of that
+interface.  It will also alert developers of out-of-tree code that there is
+a change that they need to respond to.  Supporting out-of-tree code is not
+something that kernel developers need to be worried about, but we also do
+not have to make life harder for out-of-tree developers than it needs to
+be.
diff --git a/Documentation/process/5.Posting.rst b/Documentation/process/5.Posting.rst
new file mode 100644
index 000000000..855a70b80
--- /dev/null
+++ b/Documentation/process/5.Posting.rst
@@ -0,0 +1,331 @@
+.. _development_posting:
+
+Posting patches
+===============
+
+Sooner or later, the time comes when your work is ready to be presented to
+the community for review and, eventually, inclusion into the mainline
+kernel.  Unsurprisingly, the kernel development community has evolved a set
+of conventions and procedures which are used in the posting of patches;
+following them will make life much easier for everybody involved.  This
+document will attempt to cover these expectations in reasonable detail;
+more information can also be found in the files
+:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`,
+:ref:`Documentation/process/submitting-drivers.rst  <submittingdrivers>`
+and :ref:`Documentation/process/submit-checklist.rst <submitchecklist>`.
+
+
+When to post
+------------
+
+There is a constant temptation to avoid posting patches before they are
+completely "ready."  For simple patches, that is not a problem.  If the
+work being done is complex, though, there is a lot to be gained by getting
+feedback from the community before the work is complete.  So you should
+consider posting in-progress work, or even making a git tree available so
+that interested developers can catch up with your work at any time.
+
+When posting code which is not yet considered ready for inclusion, it is a
+good idea to say so in the posting itself.  Also mention any major work
+which remains to be done and any known problems.  Fewer people will look at
+patches which are known to be half-baked, but those who do will come in
+with the idea that they can help you drive the work in the right direction.
+
+
+Before creating patches
+-----------------------
+
+There are a number of things which should be done before you consider
+sending patches to the development community.  These include:
+
+ - Test the code to the extent that you can.  Make use of the kernel's
+   debugging tools, ensure that the kernel will build with all reasonable
+   combinations of configuration options, use cross-compilers to build for
+   different architectures, etc.
+
+ - Make sure your code is compliant with the kernel coding style
+   guidelines.
+
+ - Does your change have performance implications?  If so, you should run
+   benchmarks showing what the impact (or benefit) of your change is; a
+   summary of the results should be included with the patch.
+
+ - Be sure that you have the right to post the code.  If this work was done
+   for an employer, the employer likely has a right to the work and must be
+   agreeable with its release under the GPL.
+
+As a general rule, putting in some extra thought before posting code almost
+always pays back the effort in short order.
+
+
+Patch preparation
+-----------------
+
+The preparation of patches for posting can be a surprising amount of work,
+but, once again, attempting to save time here is not generally advisable
+even in the short term.
+
+Patches must be prepared against a specific version of the kernel.  As a
+general rule, a patch should be based on the current mainline as found in
+Linus's git tree.  When basing on mainline, start with a well-known release
+point - a stable or -rc release - rather than branching off the mainline at
+an arbitrary spot.
+
+It may become necessary to make versions against -mm, linux-next, or a
+subsystem tree, though, to facilitate wider testing and review.  Depending
+on the area of your patch and what is going on elsewhere, basing a patch
+against these other trees can require a significant amount of work
+resolving conflicts and dealing with API changes.
+
+Only the most simple changes should be formatted as a single patch;
+everything else should be made as a logical series of changes.  Splitting
+up patches is a bit of an art; some developers spend a long time figuring
+out how to do it in the way that the community expects.  There are a few
+rules of thumb, however, which can help considerably:
+
+ - The patch series you post will almost certainly not be the series of
+   changes found in your working revision control system.  Instead, the
+   changes you have made need to be considered in their final form, then
+   split apart in ways which make sense.  The developers are interested in
+   discrete, self-contained changes, not the path you took to get to those
+   changes.
+
+ - Each logically independent change should be formatted as a separate
+   patch.  These changes can be small ("add a field to this structure") or
+   large (adding a significant new driver, for example), but they should be
+   conceptually small and amenable to a one-line description.  Each patch
+   should make a specific change which can be reviewed on its own and
+   verified to do what it says it does.
+
+ - As a way of restating the guideline above: do not mix different types of
+   changes in the same patch.  If a single patch fixes a critical security
+   bug, rearranges a few structures, and reformats the code, there is a
+   good chance that it will be passed over and the important fix will be
+   lost.
+
+ - Each patch should yield a kernel which builds and runs properly; if your
+   patch series is interrupted in the middle, the result should still be a
+   working kernel.  Partial application of a patch series is a common
+   scenario when the "git bisect" tool is used to find regressions; if the
+   result is a broken kernel, you will make life harder for developers and
+   users who are engaging in the noble work of tracking down problems.
+
+ - Do not overdo it, though.  One developer once posted a set of edits
+   to a single file as 500 separate patches - an act which did not make him
+   the most popular person on the kernel mailing list.  A single patch can
+   be reasonably large as long as it still contains a single *logical*
+   change.
+
+ - It can be tempting to add a whole new infrastructure with a series of
+   patches, but to leave that infrastructure unused until the final patch
+   in the series enables the whole thing.  This temptation should be
+   avoided if possible; if that series adds regressions, bisection will
+   finger the last patch as the one which caused the problem, even though
+   the real bug is elsewhere.  Whenever possible, a patch which adds new
+   code should make that code active immediately.
+
+Working to create the perfect patch series can be a frustrating process
+which takes quite a bit of time and thought after the "real work" has been
+done.  When done properly, though, it is time well spent.
+
+
+Patch formatting and changelogs
+-------------------------------
+
+So now you have a perfect series of patches for posting, but the work is
+not done quite yet.  Each patch needs to be formatted into a message which
+quickly and clearly communicates its purpose to the rest of the world.  To
+that end, each patch will be composed of the following:
+
+ - An optional "From" line naming the author of the patch.  This line is
+   only necessary if you are passing on somebody else's patch via email,
+   but it never hurts to add it when in doubt.
+
+ - A one-line description of what the patch does.  This message should be
+   enough for a reader who sees it with no other context to figure out the
+   scope of the patch; it is the line that will show up in the "short form"
+   changelogs.  This message is usually formatted with the relevant
+   subsystem name first, followed by the purpose of the patch.  For
+   example:
+
+   ::
+
+	gpio: fix build on CONFIG_GPIO_SYSFS=n
+
+ - A blank line followed by a detailed description of the contents of the
+   patch.  This description can be as long as is required; it should say
+   what the patch does and why it should be applied to the kernel.
+
+ - One or more tag lines, with, at a minimum, one Signed-off-by: line from
+   the author of the patch.  Tags will be described in more detail below.
+
+The items above, together, form the changelog for the patch.  Writing good
+changelogs is a crucial but often-neglected art; it's worth spending
+another moment discussing this issue.  When writing a changelog, you should
+bear in mind that a number of different people will be reading your words.
+These include subsystem maintainers and reviewers who need to decide
+whether the patch should be included, distributors and other maintainers
+trying to decide whether a patch should be backported to other kernels, bug
+hunters wondering whether the patch is responsible for a problem they are
+chasing, users who want to know how the kernel has changed, and more.  A
+good changelog conveys the needed information to all of these people in the
+most direct and concise way possible.
+
+To that end, the summary line should describe the effects of and motivation
+for the change as well as possible given the one-line constraint.  The
+detailed description can then amplify on those topics and provide any
+needed additional information.  If the patch fixes a bug, cite the commit
+which introduced the bug if possible (and please provide both the commit ID
+and the title when citing commits).  If a problem is associated with
+specific log or compiler output, include that output to help others
+searching for a solution to the same problem.  If the change is meant to
+support other changes coming in later patch, say so.  If internal APIs are
+changed, detail those changes and how other developers should respond.  In
+general, the more you can put yourself into the shoes of everybody who will
+be reading your changelog, the better that changelog (and the kernel as a
+whole) will be.
+
+Needless to say, the changelog should be the text used when committing the
+change to a revision control system.  It will be followed by:
+
+ - The patch itself, in the unified ("-u") patch format.  Using the "-p"
+   option to diff will associate function names with changes, making the
+   resulting patch easier for others to read.
+
+You should avoid including changes to irrelevant files (those generated by
+the build process, for example, or editor backup files) in the patch.  The
+file "dontdiff" in the Documentation directory can help in this regard;
+pass it to diff with the "-X" option.
+
+The tags mentioned above are used to describe how various developers have
+been associated with the development of this patch.  They are described in
+detail in
+the :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+document; what follows here is a brief summary.  Each of these lines has
+the format:
+
+::
+
+	tag: Full Name <email address>  optional-other-stuff
+
+The tags in common use are:
+
+ - Signed-off-by: this is a developer's certification that he or she has
+   the right to submit the patch for inclusion into the kernel.  It is an
+   agreement to the Developer's Certificate of Origin, the full text of
+   which can be found in :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+   Code without a proper signoff cannot be merged into the mainline.
+
+ - Co-developed-by: states that the patch was co-created by several developers;
+   it is a used to give attribution to co-authors (in addition to the author
+   attributed by the From: tag) when multiple people work on a single patch.
+   Every Co-developed-by: must be immediately followed by a Signed-off-by: of
+   the associated co-author.  Details and examples can be found in
+   :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`.
+
+ - Acked-by: indicates an agreement by another developer (often a
+   maintainer of the relevant code) that the patch is appropriate for
+   inclusion into the kernel.
+
+ - Tested-by: states that the named person has tested the patch and found
+   it to work.
+
+ - Reviewed-by: the named developer has reviewed the patch for correctness;
+   see the reviewer's statement in :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+   for more detail.
+
+ - Reported-by: names a user who reported a problem which is fixed by this
+   patch; this tag is used to give credit to the (often underappreciated)
+   people who test our code and let us know when things do not work
+   correctly.
+
+ - Cc: the named person received a copy of the patch and had the
+   opportunity to comment on it.
+
+Be careful in the addition of tags to your patches: only Cc: is appropriate
+for addition without the explicit permission of the person named.
+
+
+Sending the patch
+-----------------
+
+Before you mail your patches, there are a couple of other things you should
+take care of:
+
+ - Are you sure that your mailer will not corrupt the patches?  Patches
+   which have had gratuitous white-space changes or line wrapping performed
+   by the mail client will not apply at the other end, and often will not
+   be examined in any detail.  If there is any doubt at all, mail the patch
+   to yourself and convince yourself that it shows up intact.
+
+   :ref:`Documentation/process/email-clients.rst <email_clients>` has some
+   helpful hints on making specific mail clients work for sending patches.
+
+ - Are you sure your patch is free of silly mistakes?  You should always
+   run patches through scripts/checkpatch.pl and address the complaints it
+   comes up with.  Please bear in mind that checkpatch.pl, while being the
+   embodiment of a fair amount of thought about what kernel patches should
+   look like, is not smarter than you.  If fixing a checkpatch.pl complaint
+   would make the code worse, don't do it.
+
+Patches should always be sent as plain text.  Please do not send them as
+attachments; that makes it much harder for reviewers to quote sections of
+the patch in their replies.  Instead, just put the patch directly into your
+message.
+
+When mailing patches, it is important to send copies to anybody who might
+be interested in it.  Unlike some other projects, the kernel encourages
+people to err on the side of sending too many copies; don't assume that the
+relevant people will see your posting on the mailing lists.  In particular,
+copies should go to:
+
+ - The maintainer(s) of the affected subsystem(s).  As described earlier,
+   the MAINTAINERS file is the first place to look for these people.
+
+ - Other developers who have been working in the same area - especially
+   those who might be working there now.  Using git to see who else has
+   modified the files you are working on can be helpful.
+
+ - If you are responding to a bug report or a feature request, copy the
+   original poster as well.
+
+ - Send a copy to the relevant mailing list, or, if nothing else applies,
+   the linux-kernel list.
+
+ - If you are fixing a bug, think about whether the fix should go into the
+   next stable update.  If so, stable@vger.kernel.org should get a copy of
+   the patch.  Also add a "Cc: stable@vger.kernel.org" to the tags within
+   the patch itself; that will cause the stable team to get a notification
+   when your fix goes into the mainline.
+
+When selecting recipients for a patch, it is good to have an idea of who
+you think will eventually accept the patch and get it merged.  While it
+is possible to send patches directly to Linus Torvalds and have him merge
+them, things are not normally done that way.  Linus is busy, and there are
+subsystem maintainers who watch over specific parts of the kernel.  Usually
+you will be wanting that maintainer to merge your patches.  If there is no
+obvious maintainer, Andrew Morton is often the patch target of last resort.
+
+Patches need good subject lines.  The canonical format for a patch line is
+something like:
+
+::
+
+	[PATCH nn/mm] subsys: one-line description of the patch
+
+where "nn" is the ordinal number of the patch, "mm" is the total number of
+patches in the series, and "subsys" is the name of the affected subsystem.
+Clearly, nn/mm can be omitted for a single, standalone patch.
+
+If you have a significant series of patches, it is customary to send an
+introductory description as part zero.  This convention is not universally
+followed though; if you use it, remember that information in the
+introduction does not make it into the kernel changelogs.  So please ensure
+that the patches, themselves, have complete changelog information.
+
+In general, the second and following parts of a multi-part patch should be
+sent as a reply to the first part so that they all thread together at the
+receiving end.  Tools like git and quilt have commands to mail out a set of
+patches with the proper threading.  If you have a long series, though, and
+are using git, please stay away from the --chain-reply-to option to avoid
+creating exceptionally deep nesting.
diff --git a/Documentation/process/6.Followthrough.rst b/Documentation/process/6.Followthrough.rst
new file mode 100644
index 000000000..a173cd5f9
--- /dev/null
+++ b/Documentation/process/6.Followthrough.rst
@@ -0,0 +1,212 @@
+.. _development_followthrough:
+
+Followthrough
+=============
+
+At this point, you have followed the guidelines given so far and, with the
+addition of your own engineering skills, have posted a perfect series of
+patches.  One of the biggest mistakes that even experienced kernel
+developers can make is to conclude that their work is now done.  In truth,
+posting patches indicates a transition into the next stage of the process,
+with, possibly, quite a bit of work yet to be done.
+
+It is a rare patch which is so good at its first posting that there is no
+room for improvement.  The kernel development process recognizes this fact,
+and, as a result, is heavily oriented toward the improvement of posted
+code.  You, as the author of that code, will be expected to work with the
+kernel community to ensure that your code is up to the kernel's quality
+standards.  A failure to participate in this process is quite likely to
+prevent the inclusion of your patches into the mainline.
+
+
+Working with reviewers
+----------------------
+
+A patch of any significance will result in a number of comments from other
+developers as they review the code.  Working with reviewers can be, for
+many developers, the most intimidating part of the kernel development
+process.  Life can be made much easier, though, if you keep a few things in
+mind:
+
+ - If you have explained your patch well, reviewers will understand its
+   value and why you went to the trouble of writing it.  But that value
+   will not keep them from asking a fundamental question: what will it be
+   like to maintain a kernel with this code in it five or ten years later?
+   Many of the changes you may be asked to make - from coding style tweaks
+   to substantial rewrites - come from the understanding that Linux will
+   still be around and under development a decade from now.
+
+ - Code review is hard work, and it is a relatively thankless occupation;
+   people remember who wrote kernel code, but there is little lasting fame
+   for those who reviewed it.  So reviewers can get grumpy, especially when
+   they see the same mistakes being made over and over again.  If you get a
+   review which seems angry, insulting, or outright offensive, resist the
+   impulse to respond in kind.  Code review is about the code, not about
+   the people, and code reviewers are not attacking you personally.
+
+ - Similarly, code reviewers are not trying to promote their employers'
+   agendas at the expense of your own.  Kernel developers often expect to
+   be working on the kernel years from now, but they understand that their
+   employer could change.  They truly are, almost without exception,
+   working toward the creation of the best kernel they can; they are not
+   trying to create discomfort for their employers' competitors.
+
+What all of this comes down to is that, when reviewers send you comments,
+you need to pay attention to the technical observations that they are
+making.  Do not let their form of expression or your own pride keep that
+from happening.  When you get review comments on a patch, take the time to
+understand what the reviewer is trying to say.  If possible, fix the things
+that the reviewer is asking you to fix.  And respond back to the reviewer:
+thank them, and describe how you will answer their questions.
+
+Note that you do not have to agree with every change suggested by
+reviewers.  If you believe that the reviewer has misunderstood your code,
+explain what is really going on.  If you have a technical objection to a
+suggested change, describe it and justify your solution to the problem.  If
+your explanations make sense, the reviewer will accept them.  Should your
+explanation not prove persuasive, though, especially if others start to
+agree with the reviewer, take some time to think things over again.  It can
+be easy to become blinded by your own solution to a problem to the point
+that you don't realize that something is fundamentally wrong or, perhaps,
+you're not even solving the right problem.
+
+Andrew Morton has suggested that every review comment which does not result
+in a code change should result in an additional code comment instead; that
+can help future reviewers avoid the questions which came up the first time
+around.
+
+One fatal mistake is to ignore review comments in the hope that they will
+go away.  They will not go away.  If you repost code without having
+responded to the comments you got the time before, you're likely to find
+that your patches go nowhere.
+
+Speaking of reposting code: please bear in mind that reviewers are not
+going to remember all the details of the code you posted the last time
+around.  So it is always a good idea to remind reviewers of previously
+raised issues and how you dealt with them; the patch changelog is a good
+place for this kind of information.  Reviewers should not have to search
+through list archives to familiarize themselves with what was said last
+time; if you help them get a running start, they will be in a better mood
+when they revisit your code.
+
+What if you've tried to do everything right and things still aren't going
+anywhere?  Most technical disagreements can be resolved through discussion,
+but there are times when somebody simply has to make a decision.  If you
+honestly believe that this decision is going against you wrongly, you can
+always try appealing to a higher power.  As of this writing, that higher
+power tends to be Andrew Morton.  Andrew has a great deal of respect in the
+kernel development community; he can often unjam a situation which seems to
+be hopelessly blocked.  Appealing to Andrew should not be done lightly,
+though, and not before all other alternatives have been explored.  And bear
+in mind, of course, that he may not agree with you either.
+
+
+What happens next
+-----------------
+
+If a patch is considered to be a good thing to add to the kernel, and once
+most of the review issues have been resolved, the next step is usually
+entry into a subsystem maintainer's tree.  How that works varies from one
+subsystem to the next; each maintainer has his or her own way of doing
+things.  In particular, there may be more than one tree - one, perhaps,
+dedicated to patches planned for the next merge window, and another for
+longer-term work.
+
+For patches applying to areas for which there is no obvious subsystem tree
+(memory management patches, for example), the default tree often ends up
+being -mm.  Patches which affect multiple subsystems can also end up going
+through the -mm tree.
+
+Inclusion into a subsystem tree can bring a higher level of visibility to a
+patch.  Now other developers working with that tree will get the patch by
+default.  Subsystem trees typically feed linux-next as well, making their
+contents visible to the development community as a whole.  At this point,
+there's a good chance that you will get more comments from a new set of
+reviewers; these comments need to be answered as in the previous round.
+
+What may also happen at this point, depending on the nature of your patch,
+is that conflicts with work being done by others turn up.  In the worst
+case, heavy patch conflicts can result in some work being put on the back
+burner so that the remaining patches can be worked into shape and merged.
+Other times, conflict resolution will involve working with the other
+developers and, possibly, moving some patches between trees to ensure that
+everything applies cleanly.  This work can be a pain, but count your
+blessings: before the advent of the linux-next tree, these conflicts often
+only turned up during the merge window and had to be addressed in a hurry.
+Now they can be resolved at leisure, before the merge window opens.
+
+Some day, if all goes well, you'll log on and see that your patch has been
+merged into the mainline kernel.  Congratulations!  Once the celebration is
+complete (and you have added yourself to the MAINTAINERS file), though, it
+is worth remembering an important little fact: the job still is not done.
+Merging into the mainline brings its own challenges.
+
+To begin with, the visibility of your patch has increased yet again.  There
+may be a new round of comments from developers who had not been aware of
+the patch before.  It may be tempting to ignore them, since there is no
+longer any question of your code being merged.  Resist that temptation,
+though; you still need to be responsive to developers who have questions or
+suggestions.
+
+More importantly, though: inclusion into the mainline puts your code into
+the hands of a much larger group of testers.  Even if you have contributed
+a driver for hardware which is not yet available, you will be surprised by
+how many people will build your code into their kernels.  And, of course,
+where there are testers, there will be bug reports.
+
+The worst sort of bug reports are regressions.  If your patch causes a
+regression, you'll find an uncomfortable number of eyes upon you;
+regressions need to be fixed as soon as possible.  If you are unwilling or
+unable to fix the regression (and nobody else does it for you), your patch
+will almost certainly be removed during the stabilization period.  Beyond
+negating all of the work you have done to get your patch into the mainline,
+having a patch pulled as the result of a failure to fix a regression could
+well make it harder for you to get work merged in the future.
+
+After any regressions have been dealt with, there may be other, ordinary
+bugs to deal with.  The stabilization period is your best opportunity to
+fix these bugs and ensure that your code's debut in a mainline kernel
+release is as solid as possible.  So, please, answer bug reports, and fix
+the problems if at all possible.  That's what the stabilization period is
+for; you can start creating cool new patches once any problems with the old
+ones have been taken care of.
+
+And don't forget that there are other milestones which may also create bug
+reports: the next mainline stable release, when prominent distributors pick
+up a version of the kernel containing your patch, etc.  Continuing to
+respond to these reports is a matter of basic pride in your work.  If that
+is insufficient motivation, though, it's also worth considering that the
+development community remembers developers who lose interest in their code
+after it's merged.  The next time you post a patch, they will be evaluating
+it with the assumption that you will not be around to maintain it
+afterward.
+
+
+Other things that can happen
+-----------------------------
+
+One day, you may open your mail client and see that somebody has mailed you
+a patch to your code.  That is one of the advantages of having your code
+out there in the open, after all.  If you agree with the patch, you can
+either forward it on to the subsystem maintainer (be sure to include a
+proper From: line so that the attribution is correct, and add a signoff of
+your own), or send an Acked-by: response back and let the original poster
+send it upward.
+
+If you disagree with the patch, send a polite response explaining why.  If
+possible, tell the author what changes need to be made to make the patch
+acceptable to you.  There is a certain resistance to merging patches which
+are opposed by the author and maintainer of the code, but it only goes so
+far.  If you are seen as needlessly blocking good work, those patches will
+eventually flow around you and get into the mainline anyway.  In the Linux
+kernel, nobody has absolute veto power over any code.  Except maybe Linus.
+
+On very rare occasion, you may see something completely different: another
+developer posts a different solution to your problem.  At that point,
+chances are that one of the two patches will not be merged, and "mine was
+here first" is not considered to be a compelling technical argument.  If
+somebody else's patch displaces yours and gets into the mainline, there is
+really only one way to respond: be pleased that your problem got solved and
+get on with your work.  Having one's work shoved aside in this manner can
+be hurtful and discouraging, but the community will remember your reaction
+long after they have forgotten whose patch actually got merged.
diff --git a/Documentation/process/7.AdvancedTopics.rst b/Documentation/process/7.AdvancedTopics.rst
new file mode 100644
index 000000000..bf7cbfb4c
--- /dev/null
+++ b/Documentation/process/7.AdvancedTopics.rst
@@ -0,0 +1,178 @@
+.. _development_advancedtopics:
+
+Advanced topics
+===============
+
+At this point, hopefully, you have a handle on how the development process
+works.  There is still more to learn, however!  This section will cover a
+number of topics which can be helpful for developers wanting to become a
+regular part of the Linux kernel development process.
+
+Managing patches with git
+-------------------------
+
+The use of distributed version control for the kernel began in early 2002,
+when Linus first started playing with the proprietary BitKeeper
+application.  While BitKeeper was controversial, the approach to software
+version management it embodied most certainly was not.  Distributed version
+control enabled an immediate acceleration of the kernel development
+project.  In current times, there are several free alternatives to
+BitKeeper.  For better or for worse, the kernel project has settled on git
+as its tool of choice.
+
+Managing patches with git can make life much easier for the developer,
+especially as the volume of those patches grows.  Git also has its rough
+edges and poses certain hazards; it is a young and powerful tool which is
+still being civilized by its developers.  This document will not attempt to
+teach the reader how to use git; that would be sufficient material for a
+long document in its own right.  Instead, the focus here will be on how git
+fits into the kernel development process in particular.  Developers who
+wish to come up to speed with git will find more information at:
+
+	https://git-scm.com/
+
+	https://www.kernel.org/pub/software/scm/git/docs/user-manual.html
+
+and on various tutorials found on the web.
+
+The first order of business is to read the above sites and get a solid
+understanding of how git works before trying to use it to make patches
+available to others.  A git-using developer should be able to obtain a copy
+of the mainline repository, explore the revision history, commit changes to
+the tree, use branches, etc.  An understanding of git's tools for the
+rewriting of history (such as rebase) is also useful.  Git comes with its
+own terminology and concepts; a new user of git should know about refs,
+remote branches, the index, fast-forward merges, pushes and pulls, detached
+heads, etc.  It can all be a little intimidating at the outset, but the
+concepts are not that hard to grasp with a bit of study.
+
+Using git to generate patches for submission by email can be a good
+exercise while coming up to speed.
+
+When you are ready to start putting up git trees for others to look at, you
+will, of course, need a server that can be pulled from.  Setting up such a
+server with git-daemon is relatively straightforward if you have a system
+which is accessible to the Internet.  Otherwise, free, public hosting sites
+(Github, for example) are starting to appear on the net.  Established
+developers can get an account on kernel.org, but those are not easy to come
+by; see https://kernel.org/faq/ for more information.
+
+The normal git workflow involves the use of a lot of branches.  Each line
+of development can be separated into a separate "topic branch" and
+maintained independently.  Branches in git are cheap, there is no reason to
+not make free use of them.  And, in any case, you should not do your
+development in any branch which you intend to ask others to pull from.
+Publicly-available branches should be created with care; merge in patches
+from development branches when they are in complete form and ready to go -
+not before.
+
+Git provides some powerful tools which can allow you to rewrite your
+development history.  An inconvenient patch (one which breaks bisection,
+say, or which has some other sort of obvious bug) can be fixed in place or
+made to disappear from the history entirely.  A patch series can be
+rewritten as if it had been written on top of today's mainline, even though
+you have been working on it for months.  Changes can be transparently
+shifted from one branch to another.  And so on.  Judicious use of git's
+ability to revise history can help in the creation of clean patch sets with
+fewer problems.
+
+Excessive use of this capability can lead to other problems, though, beyond
+a simple obsession for the creation of the perfect project history.
+Rewriting history will rewrite the changes contained in that history,
+turning a tested (hopefully) kernel tree into an untested one.  But, beyond
+that, developers cannot easily collaborate if they do not have a shared
+view of the project history; if you rewrite history which other developers
+have pulled into their repositories, you will make life much more difficult
+for those developers.  So a simple rule of thumb applies here: history
+which has been exported to others should generally be seen as immutable
+thereafter.
+
+So, once you push a set of changes to your publicly-available server, those
+changes should not be rewritten.  Git will attempt to enforce this rule if
+you try to push changes which do not result in a fast-forward merge
+(i.e. changes which do not share the same history).  It is possible to
+override this check, and there may be times when it is necessary to rewrite
+an exported tree.  Moving changesets between trees to avoid conflicts in
+linux-next is one example.  But such actions should be rare.  This is one
+of the reasons why development should be done in private branches (which
+can be rewritten if necessary) and only moved into public branches when
+it's in a reasonably advanced state.
+
+As the mainline (or other tree upon which a set of changes is based)
+advances, it is tempting to merge with that tree to stay on the leading
+edge.  For a private branch, rebasing can be an easy way to keep up with
+another tree, but rebasing is not an option once a tree is exported to the
+world.  Once that happens, a full merge must be done.  Merging occasionally
+makes good sense, but overly frequent merges can clutter the history
+needlessly.  Suggested technique in this case is to merge infrequently, and
+generally only at specific release points (such as a mainline -rc
+release).  If you are nervous about specific changes, you can always
+perform test merges in a private branch.  The git "rerere" tool can be
+useful in such situations; it remembers how merge conflicts were resolved
+so that you don't have to do the same work twice.
+
+One of the biggest recurring complaints about tools like git is this: the
+mass movement of patches from one repository to another makes it easy to
+slip in ill-advised changes which go into the mainline below the review
+radar.  Kernel developers tend to get unhappy when they see that kind of
+thing happening; putting up a git tree with unreviewed or off-topic patches
+can affect your ability to get trees pulled in the future.  Quoting Linus:
+
+::
+
+	You can send me patches, but for me to pull a git patch from you, I
+	need to know that you know what you're doing, and I need to be able
+	to trust things *without* then having to go and check every
+	individual change by hand.
+
+(https://lwn.net/Articles/224135/).
+
+To avoid this kind of situation, ensure that all patches within a given
+branch stick closely to the associated topic; a "driver fixes" branch
+should not be making changes to the core memory management code.  And, most
+importantly, do not use a git tree to bypass the review process.  Post an
+occasional summary of the tree to the relevant list, and, when the time is
+right, request that the tree be included in linux-next.
+
+If and when others start to send patches for inclusion into your tree,
+don't forget to review them.  Also ensure that you maintain the correct
+authorship information; the git "am" tool does its best in this regard, but
+you may have to add a "From:" line to the patch if it has been relayed to
+you via a third party.
+
+When requesting a pull, be sure to give all the relevant information: where
+your tree is, what branch to pull, and what changes will result from the
+pull.  The git request-pull command can be helpful in this regard; it will
+format the request as other developers expect, and will also check to be
+sure that you have remembered to push those changes to the public server.
+
+
+Reviewing patches
+-----------------
+
+Some readers will certainly object to putting this section with "advanced
+topics" on the grounds that even beginning kernel developers should be
+reviewing patches.  It is certainly true that there is no better way to
+learn how to program in the kernel environment than by looking at code
+posted by others.  In addition, reviewers are forever in short supply; by
+looking at code you can make a significant contribution to the process as a
+whole.
+
+Reviewing code can be an intimidating prospect, especially for a new kernel
+developer who may well feel nervous about questioning code - in public -
+which has been posted by those with more experience.  Even code written by
+the most experienced developers can be improved, though.  Perhaps the best
+piece of advice for reviewers (all reviewers) is this: phrase review
+comments as questions rather than criticisms.  Asking "how does the lock
+get released in this path?" will always work better than stating "the
+locking here is wrong."
+
+Different developers will review code from different points of view.  Some
+are mostly concerned with coding style and whether code lines have trailing
+white space.  Others will focus primarily on whether the change implemented
+by the patch as a whole is a good thing for the kernel or not.  Yet others
+will check for problematic locking, excessive stack usage, possible
+security issues, duplication of code found elsewhere, adequate
+documentation, adverse effects on performance, user-space ABI changes, etc.
+All types of review, if they lead to better code going into the kernel, are
+welcome and worthwhile.
diff --git a/Documentation/process/8.Conclusion.rst b/Documentation/process/8.Conclusion.rst
new file mode 100644
index 000000000..b32a40215
--- /dev/null
+++ b/Documentation/process/8.Conclusion.rst
@@ -0,0 +1,75 @@
+.. _development_conclusion:
+
+For more information
+====================
+
+There are numerous sources of information on Linux kernel development and
+related topics.  First among those will always be the Documentation
+directory found in the kernel source distribution.  The top-level :ref:`process/howto.rst <process_howto>`
+file is an important starting point; :ref:`process/submitting-patches.rst <submittingpatches>`
+and :ref:`process/submitting-drivers.rst  <submittingdrivers>`
+are also something which all kernel developers should
+read.  Many internal kernel APIs are documented using the kerneldoc
+mechanism; "make htmldocs" or "make pdfdocs" can be used to generate those
+documents in HTML or PDF format (though the version of TeX shipped by some
+distributions runs into internal limits and fails to process the documents
+properly).
+
+Various web sites discuss kernel development at all levels of detail.  Your
+author would like to humbly suggest https://lwn.net/ as a source;
+information on many specific kernel topics can be found via the LWN kernel
+index at:
+
+	https://lwn.net/Kernel/Index/
+
+Beyond that, a valuable resource for kernel developers is:
+
+	https://kernelnewbies.org/
+
+And, of course, one should not forget https://kernel.org/, the definitive
+location for kernel release information.
+
+There are a number of books on kernel development:
+
+	Linux Device Drivers, 3rd Edition (Jonathan Corbet, Alessandro
+	Rubini, and Greg Kroah-Hartman).  Online at
+	https://lwn.net/Kernel/LDD3/.
+
+	Linux Kernel Development (Robert Love).
+
+	Understanding the Linux Kernel (Daniel Bovet and Marco Cesati).
+
+All of these books suffer from a common fault, though: they tend to be
+somewhat obsolete by the time they hit the shelves, and they have been on
+the shelves for a while now.  Still, there is quite a bit of good
+information to be found there.
+
+Documentation for git can be found at:
+
+	https://www.kernel.org/pub/software/scm/git/docs/
+
+	https://www.kernel.org/pub/software/scm/git/docs/user-manual.html
+
+
+Conclusion
+==========
+
+Congratulations to anybody who has made it through this long-winded
+document.  Hopefully it has provided a helpful understanding of how the
+Linux kernel is developed and how you can participate in that process.
+
+In the end, it's the participation that matters.  Any open source software
+project is no more than the sum of what its contributors put into it.  The
+Linux kernel has progressed as quickly and as well as it has because it has
+been helped by an impressively large group of developers, all of whom are
+working to make it better.  The kernel is a premier example of what can be
+done when thousands of people work together toward a common goal.
+
+The kernel can always benefit from a larger developer base, though.  There
+is always more work to do.  But, just as importantly, most other
+participants in the Linux ecosystem can benefit through contributing to the
+kernel.  Getting code into the mainline is the key to higher code quality,
+lower maintenance and distribution costs, a higher level of influence over
+the direction of kernel development, and more.  It is a situation where
+everybody involved wins.  Fire up your editor and come join us; you will be
+more than welcome.
diff --git a/Documentation/process/adding-syscalls.rst b/Documentation/process/adding-syscalls.rst
new file mode 100644
index 000000000..a3ecb2365
--- /dev/null
+++ b/Documentation/process/adding-syscalls.rst
@@ -0,0 +1,577 @@
+
+.. _addsyscalls:
+
+Adding a New System Call
+========================
+
+This document describes what's involved in adding a new system call to the
+Linux kernel, over and above the normal submission advice in
+:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`.
+
+
+System Call Alternatives
+------------------------
+
+The first thing to consider when adding a new system call is whether one of
+the alternatives might be suitable instead.  Although system calls are the
+most traditional and most obvious interaction points between userspace and the
+kernel, there are other possibilities -- choose what fits best for your
+interface.
+
+ - If the operations involved can be made to look like a filesystem-like
+   object, it may make more sense to create a new filesystem or device.  This
+   also makes it easier to encapsulate the new functionality in a kernel module
+   rather than requiring it to be built into the main kernel.
+
+     - If the new functionality involves operations where the kernel notifies
+       userspace that something has happened, then returning a new file
+       descriptor for the relevant object allows userspace to use
+       ``poll``/``select``/``epoll`` to receive that notification.
+     - However, operations that don't map to
+       :manpage:`read(2)`/:manpage:`write(2)`-like operations
+       have to be implemented as :manpage:`ioctl(2)` requests, which can lead
+       to a somewhat opaque API.
+
+ - If you're just exposing runtime system information, a new node in sysfs
+   (see ``Documentation/filesystems/sysfs.rst``) or the ``/proc`` filesystem may
+   be more appropriate.  However, access to these mechanisms requires that the
+   relevant filesystem is mounted, which might not always be the case (e.g.
+   in a namespaced/sandboxed/chrooted environment).  Avoid adding any API to
+   debugfs, as this is not considered a 'production' interface to userspace.
+ - If the operation is specific to a particular file or file descriptor, then
+   an additional :manpage:`fcntl(2)` command option may be more appropriate.  However,
+   :manpage:`fcntl(2)` is a multiplexing system call that hides a lot of complexity, so
+   this option is best for when the new function is closely analogous to
+   existing :manpage:`fcntl(2)` functionality, or the new functionality is very simple
+   (for example, getting/setting a simple flag related to a file descriptor).
+ - If the operation is specific to a particular task or process, then an
+   additional :manpage:`prctl(2)` command option may be more appropriate.  As
+   with :manpage:`fcntl(2)`, this system call is a complicated multiplexor so
+   is best reserved for near-analogs of existing ``prctl()`` commands or
+   getting/setting a simple flag related to a process.
+
+
+Designing the API: Planning for Extension
+-----------------------------------------
+
+A new system call forms part of the API of the kernel, and has to be supported
+indefinitely.  As such, it's a very good idea to explicitly discuss the
+interface on the kernel mailing list, and it's important to plan for future
+extensions of the interface.
+
+(The syscall table is littered with historical examples where this wasn't done,
+together with the corresponding follow-up system calls --
+``eventfd``/``eventfd2``, ``dup2``/``dup3``, ``inotify_init``/``inotify_init1``,
+``pipe``/``pipe2``, ``renameat``/``renameat2`` -- so
+learn from the history of the kernel and plan for extensions from the start.)
+
+For simpler system calls that only take a couple of arguments, the preferred
+way to allow for future extensibility is to include a flags argument to the
+system call.  To make sure that userspace programs can safely use flags
+between kernel versions, check whether the flags value holds any unknown
+flags, and reject the system call (with ``EINVAL``) if it does::
+
+    if (flags & ~(THING_FLAG1 | THING_FLAG2 | THING_FLAG3))
+        return -EINVAL;
+
+(If no flags values are used yet, check that the flags argument is zero.)
+
+For more sophisticated system calls that involve a larger number of arguments,
+it's preferred to encapsulate the majority of the arguments into a structure
+that is passed in by pointer.  Such a structure can cope with future extension
+by including a size argument in the structure::
+
+    struct xyzzy_params {
+        u32 size; /* userspace sets p->size = sizeof(struct xyzzy_params) */
+        u32 param_1;
+        u64 param_2;
+        u64 param_3;
+    };
+
+As long as any subsequently added field, say ``param_4``, is designed so that a
+zero value gives the previous behaviour, then this allows both directions of
+version mismatch:
+
+ - To cope with a later userspace program calling an older kernel, the kernel
+   code should check that any memory beyond the size of the structure that it
+   expects is zero (effectively checking that ``param_4 == 0``).
+ - To cope with an older userspace program calling a newer kernel, the kernel
+   code can zero-extend a smaller instance of the structure (effectively
+   setting ``param_4 = 0``).
+
+See :manpage:`perf_event_open(2)` and the ``perf_copy_attr()`` function (in
+``kernel/events/core.c``) for an example of this approach.
+
+
+Designing the API: Other Considerations
+---------------------------------------
+
+If your new system call allows userspace to refer to a kernel object, it
+should use a file descriptor as the handle for that object -- don't invent a
+new type of userspace object handle when the kernel already has mechanisms and
+well-defined semantics for using file descriptors.
+
+If your new :manpage:`xyzzy(2)` system call does return a new file descriptor,
+then the flags argument should include a value that is equivalent to setting
+``O_CLOEXEC`` on the new FD.  This makes it possible for userspace to close
+the timing window between ``xyzzy()`` and calling
+``fcntl(fd, F_SETFD, FD_CLOEXEC)``, where an unexpected ``fork()`` and
+``execve()`` in another thread could leak a descriptor to
+the exec'ed program. (However, resist the temptation to re-use the actual value
+of the ``O_CLOEXEC`` constant, as it is architecture-specific and is part of a
+numbering space of ``O_*`` flags that is fairly full.)
+
+If your system call returns a new file descriptor, you should also consider
+what it means to use the :manpage:`poll(2)` family of system calls on that file
+descriptor. Making a file descriptor ready for reading or writing is the
+normal way for the kernel to indicate to userspace that an event has
+occurred on the corresponding kernel object.
+
+If your new :manpage:`xyzzy(2)` system call involves a filename argument::
+
+    int sys_xyzzy(const char __user *path, ..., unsigned int flags);
+
+you should also consider whether an :manpage:`xyzzyat(2)` version is more appropriate::
+
+    int sys_xyzzyat(int dfd, const char __user *path, ..., unsigned int flags);
+
+This allows more flexibility for how userspace specifies the file in question;
+in particular it allows userspace to request the functionality for an
+already-opened file descriptor using the ``AT_EMPTY_PATH`` flag, effectively
+giving an :manpage:`fxyzzy(3)` operation for free::
+
+ - xyzzyat(AT_FDCWD, path, ..., 0) is equivalent to xyzzy(path,...)
+ - xyzzyat(fd, "", ..., AT_EMPTY_PATH) is equivalent to fxyzzy(fd, ...)
+
+(For more details on the rationale of the \*at() calls, see the
+:manpage:`openat(2)` man page; for an example of AT_EMPTY_PATH, see the
+:manpage:`fstatat(2)` man page.)
+
+If your new :manpage:`xyzzy(2)` system call involves a parameter describing an
+offset within a file, make its type ``loff_t`` so that 64-bit offsets can be
+supported even on 32-bit architectures.
+
+If your new :manpage:`xyzzy(2)` system call involves privileged functionality,
+it needs to be governed by the appropriate Linux capability bit (checked with
+a call to ``capable()``), as described in the :manpage:`capabilities(7)` man
+page.  Choose an existing capability bit that governs related functionality,
+but try to avoid combining lots of only vaguely related functions together
+under the same bit, as this goes against capabilities' purpose of splitting
+the power of root.  In particular, avoid adding new uses of the already
+overly-general ``CAP_SYS_ADMIN`` capability.
+
+If your new :manpage:`xyzzy(2)` system call manipulates a process other than
+the calling process, it should be restricted (using a call to
+``ptrace_may_access()``) so that only a calling process with the same
+permissions as the target process, or with the necessary capabilities, can
+manipulate the target process.
+
+Finally, be aware that some non-x86 architectures have an easier time if
+system call parameters that are explicitly 64-bit fall on odd-numbered
+arguments (i.e. parameter 1, 3, 5), to allow use of contiguous pairs of 32-bit
+registers.  (This concern does not apply if the arguments are part of a
+structure that's passed in by pointer.)
+
+
+Proposing the API
+-----------------
+
+To make new system calls easy to review, it's best to divide up the patchset
+into separate chunks.  These should include at least the following items as
+distinct commits (each of which is described further below):
+
+ - The core implementation of the system call, together with prototypes,
+   generic numbering, Kconfig changes and fallback stub implementation.
+ - Wiring up of the new system call for one particular architecture, usually
+   x86 (including all of x86_64, x86_32 and x32).
+ - A demonstration of the use of the new system call in userspace via a
+   selftest in ``tools/testing/selftests/``.
+ - A draft man-page for the new system call, either as plain text in the
+   cover letter, or as a patch to the (separate) man-pages repository.
+
+New system call proposals, like any change to the kernel's API, should always
+be cc'ed to linux-api@vger.kernel.org.
+
+
+Generic System Call Implementation
+----------------------------------
+
+The main entry point for your new :manpage:`xyzzy(2)` system call will be called
+``sys_xyzzy()``, but you add this entry point with the appropriate
+``SYSCALL_DEFINEn()`` macro rather than explicitly.  The 'n' indicates the
+number of arguments to the system call, and the macro takes the system call name
+followed by the (type, name) pairs for the parameters as arguments.  Using
+this macro allows metadata about the new system call to be made available for
+other tools.
+
+The new entry point also needs a corresponding function prototype, in
+``include/linux/syscalls.h``, marked as asmlinkage to match the way that system
+calls are invoked::
+
+    asmlinkage long sys_xyzzy(...);
+
+Some architectures (e.g. x86) have their own architecture-specific syscall
+tables, but several other architectures share a generic syscall table. Add your
+new system call to the generic list by adding an entry to the list in
+``include/uapi/asm-generic/unistd.h``::
+
+    #define __NR_xyzzy 292
+    __SYSCALL(__NR_xyzzy, sys_xyzzy)
+
+Also update the __NR_syscalls count to reflect the additional system call, and
+note that if multiple new system calls are added in the same merge window,
+your new syscall number may get adjusted to resolve conflicts.
+
+The file ``kernel/sys_ni.c`` provides a fallback stub implementation of each
+system call, returning ``-ENOSYS``.  Add your new system call here too::
+
+    COND_SYSCALL(xyzzy);
+
+Your new kernel functionality, and the system call that controls it, should
+normally be optional, so add a ``CONFIG`` option (typically to
+``init/Kconfig``) for it. As usual for new ``CONFIG`` options:
+
+ - Include a description of the new functionality and system call controlled
+   by the option.
+ - Make the option depend on EXPERT if it should be hidden from normal users.
+ - Make any new source files implementing the function dependent on the CONFIG
+   option in the Makefile (e.g. ``obj-$(CONFIG_XYZZY_SYSCALL) += xyzzy.o``).
+ - Double check that the kernel still builds with the new CONFIG option turned
+   off.
+
+To summarize, you need a commit that includes:
+
+ - ``CONFIG`` option for the new function, normally in ``init/Kconfig``
+ - ``SYSCALL_DEFINEn(xyzzy, ...)`` for the entry point
+ - corresponding prototype in ``include/linux/syscalls.h``
+ - generic table entry in ``include/uapi/asm-generic/unistd.h``
+ - fallback stub in ``kernel/sys_ni.c``
+
+
+x86 System Call Implementation
+------------------------------
+
+To wire up your new system call for x86 platforms, you need to update the
+master syscall tables.  Assuming your new system call isn't special in some
+way (see below), this involves a "common" entry (for x86_64 and x32) in
+arch/x86/entry/syscalls/syscall_64.tbl::
+
+    333   common   xyzzy     sys_xyzzy
+
+and an "i386" entry in ``arch/x86/entry/syscalls/syscall_32.tbl``::
+
+    380   i386     xyzzy     sys_xyzzy
+
+Again, these numbers are liable to be changed if there are conflicts in the
+relevant merge window.
+
+
+Compatibility System Calls (Generic)
+------------------------------------
+
+For most system calls the same 64-bit implementation can be invoked even when
+the userspace program is itself 32-bit; even if the system call's parameters
+include an explicit pointer, this is handled transparently.
+
+However, there are a couple of situations where a compatibility layer is
+needed to cope with size differences between 32-bit and 64-bit.
+
+The first is if the 64-bit kernel also supports 32-bit userspace programs, and
+so needs to parse areas of (``__user``) memory that could hold either 32-bit or
+64-bit values.  In particular, this is needed whenever a system call argument
+is:
+
+ - a pointer to a pointer
+ - a pointer to a struct containing a pointer (e.g. ``struct iovec __user *``)
+ - a pointer to a varying sized integral type (``time_t``, ``off_t``,
+   ``long``, ...)
+ - a pointer to a struct containing a varying sized integral type.
+
+The second situation that requires a compatibility layer is if one of the
+system call's arguments has a type that is explicitly 64-bit even on a 32-bit
+architecture, for example ``loff_t`` or ``__u64``.  In this case, a value that
+arrives at a 64-bit kernel from a 32-bit application will be split into two
+32-bit values, which then need to be re-assembled in the compatibility layer.
+
+(Note that a system call argument that's a pointer to an explicit 64-bit type
+does **not** need a compatibility layer; for example, :manpage:`splice(2)`'s arguments of
+type ``loff_t __user *`` do not trigger the need for a ``compat_`` system call.)
+
+The compatibility version of the system call is called ``compat_sys_xyzzy()``,
+and is added with the ``COMPAT_SYSCALL_DEFINEn()`` macro, analogously to
+SYSCALL_DEFINEn.  This version of the implementation runs as part of a 64-bit
+kernel, but expects to receive 32-bit parameter values and does whatever is
+needed to deal with them.  (Typically, the ``compat_sys_`` version converts the
+values to 64-bit versions and either calls on to the ``sys_`` version, or both of
+them call a common inner implementation function.)
+
+The compat entry point also needs a corresponding function prototype, in
+``include/linux/compat.h``, marked as asmlinkage to match the way that system
+calls are invoked::
+
+    asmlinkage long compat_sys_xyzzy(...);
+
+If the system call involves a structure that is laid out differently on 32-bit
+and 64-bit systems, say ``struct xyzzy_args``, then the include/linux/compat.h
+header file should also include a compat version of the structure (``struct
+compat_xyzzy_args``) where each variable-size field has the appropriate
+``compat_`` type that corresponds to the type in ``struct xyzzy_args``.  The
+``compat_sys_xyzzy()`` routine can then use this ``compat_`` structure to
+parse the arguments from a 32-bit invocation.
+
+For example, if there are fields::
+
+    struct xyzzy_args {
+        const char __user *ptr;
+        __kernel_long_t varying_val;
+        u64 fixed_val;
+        /* ... */
+    };
+
+in struct xyzzy_args, then struct compat_xyzzy_args would have::
+
+    struct compat_xyzzy_args {
+        compat_uptr_t ptr;
+        compat_long_t varying_val;
+        u64 fixed_val;
+        /* ... */
+    };
+
+The generic system call list also needs adjusting to allow for the compat
+version; the entry in ``include/uapi/asm-generic/unistd.h`` should use
+``__SC_COMP`` rather than ``__SYSCALL``::
+
+    #define __NR_xyzzy 292
+    __SC_COMP(__NR_xyzzy, sys_xyzzy, compat_sys_xyzzy)
+
+To summarize, you need:
+
+ - a ``COMPAT_SYSCALL_DEFINEn(xyzzy, ...)`` for the compat entry point
+ - corresponding prototype in ``include/linux/compat.h``
+ - (if needed) 32-bit mapping struct in ``include/linux/compat.h``
+ - instance of ``__SC_COMP`` not ``__SYSCALL`` in
+   ``include/uapi/asm-generic/unistd.h``
+
+
+Compatibility System Calls (x86)
+--------------------------------
+
+To wire up the x86 architecture of a system call with a compatibility version,
+the entries in the syscall tables need to be adjusted.
+
+First, the entry in ``arch/x86/entry/syscalls/syscall_32.tbl`` gets an extra
+column to indicate that a 32-bit userspace program running on a 64-bit kernel
+should hit the compat entry point::
+
+    380   i386     xyzzy     sys_xyzzy    __ia32_compat_sys_xyzzy
+
+Second, you need to figure out what should happen for the x32 ABI version of
+the new system call.  There's a choice here: the layout of the arguments
+should either match the 64-bit version or the 32-bit version.
+
+If there's a pointer-to-a-pointer involved, the decision is easy: x32 is
+ILP32, so the layout should match the 32-bit version, and the entry in
+``arch/x86/entry/syscalls/syscall_64.tbl`` is split so that x32 programs hit
+the compatibility wrapper::
+
+    333   64       xyzzy     sys_xyzzy
+    ...
+    555   x32      xyzzy     __x32_compat_sys_xyzzy
+
+If no pointers are involved, then it is preferable to re-use the 64-bit system
+call for the x32 ABI (and consequently the entry in
+arch/x86/entry/syscalls/syscall_64.tbl is unchanged).
+
+In either case, you should check that the types involved in your argument
+layout do indeed map exactly from x32 (-mx32) to either the 32-bit (-m32) or
+64-bit (-m64) equivalents.
+
+
+System Calls Returning Elsewhere
+--------------------------------
+
+For most system calls, once the system call is complete the user program
+continues exactly where it left off -- at the next instruction, with the
+stack the same and most of the registers the same as before the system call,
+and with the same virtual memory space.
+
+However, a few system calls do things differently.  They might return to a
+different location (``rt_sigreturn``) or change the memory space
+(``fork``/``vfork``/``clone``) or even architecture (``execve``/``execveat``)
+of the program.
+
+To allow for this, the kernel implementation of the system call may need to
+save and restore additional registers to the kernel stack, allowing complete
+control of where and how execution continues after the system call.
+
+This is arch-specific, but typically involves defining assembly entry points
+that save/restore additional registers and invoke the real system call entry
+point.
+
+For x86_64, this is implemented as a ``stub_xyzzy`` entry point in
+``arch/x86/entry/entry_64.S``, and the entry in the syscall table
+(``arch/x86/entry/syscalls/syscall_64.tbl``) is adjusted to match::
+
+    333   common   xyzzy     stub_xyzzy
+
+The equivalent for 32-bit programs running on a 64-bit kernel is normally
+called ``stub32_xyzzy`` and implemented in ``arch/x86/entry/entry_64_compat.S``,
+with the corresponding syscall table adjustment in
+``arch/x86/entry/syscalls/syscall_32.tbl``::
+
+    380   i386     xyzzy     sys_xyzzy    stub32_xyzzy
+
+If the system call needs a compatibility layer (as in the previous section)
+then the ``stub32_`` version needs to call on to the ``compat_sys_`` version
+of the system call rather than the native 64-bit version.  Also, if the x32 ABI
+implementation is not common with the x86_64 version, then its syscall
+table will also need to invoke a stub that calls on to the ``compat_sys_``
+version.
+
+For completeness, it's also nice to set up a mapping so that user-mode Linux
+still works -- its syscall table will reference stub_xyzzy, but the UML build
+doesn't include ``arch/x86/entry/entry_64.S`` implementation (because UML
+simulates registers etc).  Fixing this is as simple as adding a #define to
+``arch/x86/um/sys_call_table_64.c``::
+
+    #define stub_xyzzy sys_xyzzy
+
+
+Other Details
+-------------
+
+Most of the kernel treats system calls in a generic way, but there is the
+occasional exception that may need updating for your particular system call.
+
+The audit subsystem is one such special case; it includes (arch-specific)
+functions that classify some special types of system call -- specifically
+file open (``open``/``openat``), program execution (``execve``/``exeveat``) or
+socket multiplexor (``socketcall``) operations. If your new system call is
+analogous to one of these, then the audit system should be updated.
+
+More generally, if there is an existing system call that is analogous to your
+new system call, it's worth doing a kernel-wide grep for the existing system
+call to check there are no other special cases.
+
+
+Testing
+-------
+
+A new system call should obviously be tested; it is also useful to provide
+reviewers with a demonstration of how user space programs will use the system
+call.  A good way to combine these aims is to include a simple self-test
+program in a new directory under ``tools/testing/selftests/``.
+
+For a new system call, there will obviously be no libc wrapper function and so
+the test will need to invoke it using ``syscall()``; also, if the system call
+involves a new userspace-visible structure, the corresponding header will need
+to be installed to compile the test.
+
+Make sure the selftest runs successfully on all supported architectures.  For
+example, check that it works when compiled as an x86_64 (-m64), x86_32 (-m32)
+and x32 (-mx32) ABI program.
+
+For more extensive and thorough testing of new functionality, you should also
+consider adding tests to the Linux Test Project, or to the xfstests project
+for filesystem-related changes.
+
+ - https://linux-test-project.github.io/
+ - git://git.kernel.org/pub/scm/fs/xfs/xfstests-dev.git
+
+
+Man Page
+--------
+
+All new system calls should come with a complete man page, ideally using groff
+markup, but plain text will do.  If groff is used, it's helpful to include a
+pre-rendered ASCII version of the man page in the cover email for the
+patchset, for the convenience of reviewers.
+
+The man page should be cc'ed to linux-man@vger.kernel.org
+For more details, see https://www.kernel.org/doc/man-pages/patches.html
+
+
+Do not call System Calls in the Kernel
+--------------------------------------
+
+System calls are, as stated above, interaction points between userspace and
+the kernel.  Therefore, system call functions such as ``sys_xyzzy()`` or
+``compat_sys_xyzzy()`` should only be called from userspace via the syscall
+table, but not from elsewhere in the kernel.  If the syscall functionality is
+useful to be used within the kernel, needs to be shared between an old and a
+new syscall, or needs to be shared between a syscall and its compatibility
+variant, it should be implemented by means of a "helper" function (such as
+``kern_xyzzy()``).  This kernel function may then be called within the
+syscall stub (``sys_xyzzy()``), the compatibility syscall stub
+(``compat_sys_xyzzy()``), and/or other kernel code.
+
+At least on 64-bit x86, it will be a hard requirement from v4.17 onwards to not
+call system call functions in the kernel.  It uses a different calling
+convention for system calls where ``struct pt_regs`` is decoded on-the-fly in a
+syscall wrapper which then hands processing over to the actual syscall function.
+This means that only those parameters which are actually needed for a specific
+syscall are passed on during syscall entry, instead of filling in six CPU
+registers with random user space content all the time (which may cause serious
+trouble down the call chain).
+
+Moreover, rules on how data may be accessed may differ between kernel data and
+user data.  This is another reason why calling ``sys_xyzzy()`` is generally a
+bad idea.
+
+Exceptions to this rule are only allowed in architecture-specific overrides,
+architecture-specific compatibility wrappers, or other code in arch/.
+
+
+References and Sources
+----------------------
+
+ - LWN article from Michael Kerrisk on use of flags argument in system calls:
+   https://lwn.net/Articles/585415/
+ - LWN article from Michael Kerrisk on how to handle unknown flags in a system
+   call: https://lwn.net/Articles/588444/
+ - LWN article from Jake Edge describing constraints on 64-bit system call
+   arguments: https://lwn.net/Articles/311630/
+ - Pair of LWN articles from David Drysdale that describe the system call
+   implementation paths in detail for v3.14:
+
+    - https://lwn.net/Articles/604287/
+    - https://lwn.net/Articles/604515/
+
+ - Architecture-specific requirements for system calls are discussed in the
+   :manpage:`syscall(2)` man-page:
+   http://man7.org/linux/man-pages/man2/syscall.2.html#NOTES
+ - Collated emails from Linus Torvalds discussing the problems with ``ioctl()``:
+   https://yarchive.net/comp/linux/ioctl.html
+ - "How to not invent kernel interfaces", Arnd Bergmann,
+   https://www.ukuug.org/events/linux2007/2007/papers/Bergmann.pdf
+ - LWN article from Michael Kerrisk on avoiding new uses of CAP_SYS_ADMIN:
+   https://lwn.net/Articles/486306/
+ - Recommendation from Andrew Morton that all related information for a new
+   system call should come in the same email thread:
+   https://lkml.org/lkml/2014/7/24/641
+ - Recommendation from Michael Kerrisk that a new system call should come with
+   a man page: https://lkml.org/lkml/2014/6/13/309
+ - Suggestion from Thomas Gleixner that x86 wire-up should be in a separate
+   commit: https://lkml.org/lkml/2014/11/19/254
+ - Suggestion from Greg Kroah-Hartman that it's good for new system calls to
+   come with a man-page & selftest: https://lkml.org/lkml/2014/3/19/710
+ - Discussion from Michael Kerrisk of new system call vs. :manpage:`prctl(2)` extension:
+   https://lkml.org/lkml/2014/6/3/411
+ - Suggestion from Ingo Molnar that system calls that involve multiple
+   arguments should encapsulate those arguments in a struct, which includes a
+   size field for future extensibility: https://lkml.org/lkml/2015/7/30/117
+ - Numbering oddities arising from (re-)use of O_* numbering space flags:
+
+    - commit 75069f2b5bfb ("vfs: renumber FMODE_NONOTIFY and add to uniqueness
+      check")
+    - commit 12ed2e36c98a ("fanotify: FMODE_NONOTIFY and __O_SYNC in sparc
+      conflict")
+    - commit bb458c644a59 ("Safer ABI for O_TMPFILE")
+
+ - Discussion from Matthew Wilcox about restrictions on 64-bit arguments:
+   https://lkml.org/lkml/2008/12/12/187
+ - Recommendation from Greg Kroah-Hartman that unknown flags should be
+   policed: https://lkml.org/lkml/2014/7/17/577
+ - Recommendation from Linus Torvalds that x32 system calls should prefer
+   compatibility with 64-bit versions rather than 32-bit versions:
+   https://lkml.org/lkml/2011/8/31/244
diff --git a/Documentation/process/applying-patches.rst b/Documentation/process/applying-patches.rst
new file mode 100644
index 000000000..2e7017bef
--- /dev/null
+++ b/Documentation/process/applying-patches.rst
@@ -0,0 +1,426 @@
+.. _applying_patches:
+
+Applying Patches To The Linux Kernel
+++++++++++++++++++++++++++++++++++++
+
+Original by:
+	Jesper Juhl, August 2005
+
+.. note::
+
+   This document is obsolete.  In most cases, rather than using ``patch``
+   manually, you'll almost certainly want to look at using Git instead.
+
+A frequently asked question on the Linux Kernel Mailing List is how to apply
+a patch to the kernel or, more specifically, what base kernel a patch for
+one of the many trees/branches should be applied to. Hopefully this document
+will explain this to you.
+
+In addition to explaining how to apply and revert patches, a brief
+description of the different kernel trees (and examples of how to apply
+their specific patches) is also provided.
+
+
+What is a patch?
+================
+
+A patch is a small text document containing a delta of changes between two
+different versions of a source tree. Patches are created with the ``diff``
+program.
+
+To correctly apply a patch you need to know what base it was generated from
+and what new version the patch will change the source tree into. These
+should both be present in the patch file metadata or be possible to deduce
+from the filename.
+
+
+How do I apply or revert a patch?
+=================================
+
+You apply a patch with the ``patch`` program. The patch program reads a diff
+(or patch) file and makes the changes to the source tree described in it.
+
+Patches for the Linux kernel are generated relative to the parent directory
+holding the kernel source dir.
+
+This means that paths to files inside the patch file contain the name of the
+kernel source directories it was generated against (or some other directory
+names like "a/" and "b/").
+
+Since this is unlikely to match the name of the kernel source dir on your
+local machine (but is often useful info to see what version an otherwise
+unlabeled patch was generated against) you should change into your kernel
+source directory and then strip the first element of the path from filenames
+in the patch file when applying it (the ``-p1`` argument to ``patch`` does
+this).
+
+To revert a previously applied patch, use the -R argument to patch.
+So, if you applied a patch like this::
+
+	patch -p1 < ../patch-x.y.z
+
+You can revert (undo) it like this::
+
+	patch -R -p1 < ../patch-x.y.z
+
+
+How do I feed a patch/diff file to ``patch``?
+=============================================
+
+This (as usual with Linux and other UNIX like operating systems) can be
+done in several different ways.
+
+In all the examples below I feed the file (in uncompressed form) to patch
+via stdin using the following syntax::
+
+	patch -p1 < path/to/patch-x.y.z
+
+If you just want to be able to follow the examples below and don't want to
+know of more than one way to use patch, then you can stop reading this
+section here.
+
+Patch can also get the name of the file to use via the -i argument, like
+this::
+
+	patch -p1 -i path/to/patch-x.y.z
+
+If your patch file is compressed with gzip or xz and you don't want to
+uncompress it before applying it, then you can feed it to patch like this
+instead::
+
+	xzcat path/to/patch-x.y.z.xz | patch -p1
+	bzcat path/to/patch-x.y.z.gz | patch -p1
+
+If you wish to uncompress the patch file by hand first before applying it
+(what I assume you've done in the examples below), then you simply run
+gunzip or xz on the file -- like this::
+
+	gunzip patch-x.y.z.gz
+	xz -d patch-x.y.z.xz
+
+Which will leave you with a plain text patch-x.y.z file that you can feed to
+patch via stdin or the ``-i`` argument, as you prefer.
+
+A few other nice arguments for patch are ``-s`` which causes patch to be silent
+except for errors which is nice to prevent errors from scrolling out of the
+screen too fast, and ``--dry-run`` which causes patch to just print a listing of
+what would happen, but doesn't actually make any changes. Finally ``--verbose``
+tells patch to print more information about the work being done.
+
+
+Common errors when patching
+===========================
+
+When patch applies a patch file it attempts to verify the sanity of the
+file in different ways.
+
+Checking that the file looks like a valid patch file and checking the code
+around the bits being modified matches the context provided in the patch are
+just two of the basic sanity checks patch does.
+
+If patch encounters something that doesn't look quite right it has two
+options. It can either refuse to apply the changes and abort or it can try
+to find a way to make the patch apply with a few minor changes.
+
+One example of something that's not 'quite right' that patch will attempt to
+fix up is if all the context matches, the lines being changed match, but the
+line numbers are different. This can happen, for example, if the patch makes
+a change in the middle of the file but for some reasons a few lines have
+been added or removed near the beginning of the file. In that case
+everything looks good it has just moved up or down a bit, and patch will
+usually adjust the line numbers and apply the patch.
+
+Whenever patch applies a patch that it had to modify a bit to make it fit
+it'll tell you about it by saying the patch applied with **fuzz**.
+You should be wary of such changes since even though patch probably got it
+right it doesn't /always/ get it right, and the result will sometimes be
+wrong.
+
+When patch encounters a change that it can't fix up with fuzz it rejects it
+outright and leaves a file with a ``.rej`` extension (a reject file). You can
+read this file to see exactly what change couldn't be applied, so you can
+go fix it up by hand if you wish.
+
+If you don't have any third-party patches applied to your kernel source, but
+only patches from kernel.org and you apply the patches in the correct order,
+and have made no modifications yourself to the source files, then you should
+never see a fuzz or reject message from patch. If you do see such messages
+anyway, then there's a high risk that either your local source tree or the
+patch file is corrupted in some way. In that case you should probably try
+re-downloading the patch and if things are still not OK then you'd be advised
+to start with a fresh tree downloaded in full from kernel.org.
+
+Let's look a bit more at some of the messages patch can produce.
+
+If patch stops and presents a ``File to patch:`` prompt, then patch could not
+find a file to be patched. Most likely you forgot to specify -p1 or you are
+in the wrong directory. Less often, you'll find patches that need to be
+applied with ``-p0`` instead of ``-p1`` (reading the patch file should reveal if
+this is the case -- if so, then this is an error by the person who created
+the patch but is not fatal).
+
+If you get ``Hunk #2 succeeded at 1887 with fuzz 2 (offset 7 lines).`` or a
+message similar to that, then it means that patch had to adjust the location
+of the change (in this example it needed to move 7 lines from where it
+expected to make the change to make it fit).
+
+The resulting file may or may not be OK, depending on the reason the file
+was different than expected.
+
+This often happens if you try to apply a patch that was generated against a
+different kernel version than the one you are trying to patch.
+
+If you get a message like ``Hunk #3 FAILED at 2387.``, then it means that the
+patch could not be applied correctly and the patch program was unable to
+fuzz its way through. This will generate a ``.rej`` file with the change that
+caused the patch to fail and also a ``.orig`` file showing you the original
+content that couldn't be changed.
+
+If you get ``Reversed (or previously applied) patch detected!  Assume -R? [n]``
+then patch detected that the change contained in the patch seems to have
+already been made.
+
+If you actually did apply this patch previously and you just re-applied it
+in error, then just say [n]o and abort this patch. If you applied this patch
+previously and actually intended to revert it, but forgot to specify -R,
+then you can say [**y**]es here to make patch revert it for you.
+
+This can also happen if the creator of the patch reversed the source and
+destination directories when creating the patch, and in that case reverting
+the patch will in fact apply it.
+
+A message similar to ``patch: **** unexpected end of file in patch`` or
+``patch unexpectedly ends in middle of line`` means that patch could make no
+sense of the file you fed to it. Either your download is broken, you tried to
+feed patch a compressed patch file without uncompressing it first, or the patch
+file that you are using has been mangled by a mail client or mail transfer
+agent along the way somewhere, e.g., by splitting a long line into two lines.
+Often these warnings can easily be fixed by joining (concatenating) the
+two lines that had been split.
+
+As I already mentioned above, these errors should never happen if you apply
+a patch from kernel.org to the correct version of an unmodified source tree.
+So if you get these errors with kernel.org patches then you should probably
+assume that either your patch file or your tree is broken and I'd advise you
+to start over with a fresh download of a full kernel tree and the patch you
+wish to apply.
+
+
+Are there any alternatives to ``patch``?
+========================================
+
+
+Yes there are alternatives.
+
+You can use the ``interdiff`` program (http://cyberelk.net/tim/patchutils/) to
+generate a patch representing the differences between two patches and then
+apply the result.
+
+This will let you move from something like 5.7.2 to 5.7.3 in a single
+step. The -z flag to interdiff will even let you feed it patches in gzip or
+bzip2 compressed form directly without the use of zcat or bzcat or manual
+decompression.
+
+Here's how you'd go from 5.7.2 to 5.7.3 in a single step::
+
+	interdiff -z ../patch-5.7.2.gz ../patch-5.7.3.gz | patch -p1
+
+Although interdiff may save you a step or two you are generally advised to
+do the additional steps since interdiff can get things wrong in some cases.
+
+Another alternative is ``ketchup``, which is a python script for automatic
+downloading and applying of patches (https://www.selenic.com/ketchup/).
+
+Other nice tools are diffstat, which shows a summary of changes made by a
+patch; lsdiff, which displays a short listing of affected files in a patch
+file, along with (optionally) the line numbers of the start of each patch;
+and grepdiff, which displays a list of the files modified by a patch where
+the patch contains a given regular expression.
+
+
+Where can I download the patches?
+=================================
+
+The patches are available at https://kernel.org/
+Most recent patches are linked from the front page, but they also have
+specific homes.
+
+The 5.x.y (-stable) and 5.x patches live at
+
+	https://www.kernel.org/pub/linux/kernel/v5.x/
+
+The -rc patches are not stored on the webserver but are generated on
+demand from git tags such as
+
+	https://git.kernel.org/torvalds/p/v5.1-rc1/v5.0
+
+The stable -rc patches live at
+
+	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/
+
+
+The 5.x kernels
+===============
+
+These are the base stable releases released by Linus. The highest numbered
+release is the most recent.
+
+If regressions or other serious flaws are found, then a -stable fix patch
+will be released (see below) on top of this base. Once a new 5.x base
+kernel is released, a patch is made available that is a delta between the
+previous 5.x kernel and the new one.
+
+To apply a patch moving from 5.6 to 5.7, you'd do the following (note
+that such patches do **NOT** apply on top of 5.x.y kernels but on top of the
+base 5.x kernel -- if you need to move from 5.x.y to 5.x+1 you need to
+first revert the 5.x.y patch).
+
+Here are some examples::
+
+	# moving from 5.6 to 5.7
+
+	$ cd ~/linux-5.6		# change to kernel source dir
+	$ patch -p1 < ../patch-5.7	# apply the 5.7 patch
+	$ cd ..
+	$ mv linux-5.6 linux-5.7	# rename source dir
+
+	# moving from 5.6.1 to 5.7
+
+	$ cd ~/linux-5.6.1		# change to kernel source dir
+	$ patch -p1 -R < ../patch-5.6.1	# revert the 5.6.1 patch
+					# source dir is now 5.6
+	$ patch -p1 < ../patch-5.7	# apply new 5.7 patch
+	$ cd ..
+	$ mv linux-5.6.1 linux-5.7	# rename source dir
+
+
+The 5.x.y kernels
+=================
+
+Kernels with 3-digit versions are -stable kernels. They contain small(ish)
+critical fixes for security problems or significant regressions discovered
+in a given 5.x kernel.
+
+This is the recommended branch for users who want the most recent stable
+kernel and are not interested in helping test development/experimental
+versions.
+
+If no 5.x.y kernel is available, then the highest numbered 5.x kernel is
+the current stable kernel.
+
+.. note::
+
+ The -stable team usually do make incremental patches available as well
+ as patches against the latest mainline release, but I only cover the
+ non-incremental ones below. The incremental ones can be found at
+ https://www.kernel.org/pub/linux/kernel/v5.x/incr/
+
+These patches are not incremental, meaning that for example the 5.7.3
+patch does not apply on top of the 5.7.2 kernel source, but rather on top
+of the base 5.7 kernel source.
+
+So, in order to apply the 5.7.3 patch to your existing 5.7.2 kernel
+source you have to first back out the 5.7.2 patch (so you are left with a
+base 5.7 kernel source) and then apply the new 5.7.3 patch.
+
+Here's a small example::
+
+	$ cd ~/linux-5.7.2		# change to the kernel source dir
+	$ patch -p1 -R < ../patch-5.7.2	# revert the 5.7.2 patch
+	$ patch -p1 < ../patch-5.7.3	# apply the new 5.7.3 patch
+	$ cd ..
+	$ mv linux-5.7.2 linux-5.7.3	# rename the kernel source dir
+
+The -rc kernels
+===============
+
+These are release-candidate kernels. These are development kernels released
+by Linus whenever he deems the current git (the kernel's source management
+tool) tree to be in a reasonably sane state adequate for testing.
+
+These kernels are not stable and you should expect occasional breakage if
+you intend to run them. This is however the most stable of the main
+development branches and is also what will eventually turn into the next
+stable kernel, so it is important that it be tested by as many people as
+possible.
+
+This is a good branch to run for people who want to help out testing
+development kernels but do not want to run some of the really experimental
+stuff (such people should see the sections about -next and -mm kernels below).
+
+The -rc patches are not incremental, they apply to a base 5.x kernel, just
+like the 5.x.y patches described above. The kernel version before the -rcN
+suffix denotes the version of the kernel that this -rc kernel will eventually
+turn into.
+
+So, 5.8-rc5 means that this is the fifth release candidate for the 5.8
+kernel and the patch should be applied on top of the 5.7 kernel source.
+
+Here are 3 examples of how to apply these patches::
+
+	# first an example of moving from 5.7 to 5.8-rc3
+
+	$ cd ~/linux-5.7			# change to the 5.7 source dir
+	$ patch -p1 < ../patch-5.8-rc3		# apply the 5.8-rc3 patch
+	$ cd ..
+	$ mv linux-5.7 linux-5.8-rc3		# rename the source dir
+
+	# now let's move from 5.8-rc3 to 5.8-rc5
+
+	$ cd ~/linux-5.8-rc3			# change to the 5.8-rc3 dir
+	$ patch -p1 -R < ../patch-5.8-rc3	# revert the 5.8-rc3 patch
+	$ patch -p1 < ../patch-5.8-rc5		# apply the new 5.8-rc5 patch
+	$ cd ..
+	$ mv linux-5.8-rc3 linux-5.8-rc5	# rename the source dir
+
+	# finally let's try and move from 5.7.3 to 5.8-rc5
+
+	$ cd ~/linux-5.7.3			# change to the kernel source dir
+	$ patch -p1 -R < ../patch-5.7.3		# revert the 5.7.3 patch
+	$ patch -p1 < ../patch-5.8-rc5		# apply new 5.8-rc5 patch
+	$ cd ..
+	$ mv linux-5.7.3 linux-5.8-rc5		# rename the kernel source dir
+
+
+The -mm patches and the linux-next tree
+=======================================
+
+The -mm patches are experimental patches released by Andrew Morton.
+
+In the past, -mm tree were used to also test subsystem patches, but this
+function is now done via the
+`linux-next <https://www.kernel.org/doc/man-pages/linux-next.html>`
+tree. The Subsystem maintainers push their patches first to linux-next,
+and, during the merge window, sends them directly to Linus.
+
+The -mm patches serve as a sort of proving ground for new features and other
+experimental patches that aren't merged via a subsystem tree.
+Once such patches has proved its worth in -mm for a while Andrew pushes
+it on to Linus for inclusion in mainline.
+
+The linux-next tree is daily updated, and includes the -mm patches.
+Both are in constant flux and contains many experimental features, a
+lot of debugging patches not appropriate for mainline etc., and is the most
+experimental of the branches described in this document.
+
+These patches are not appropriate for use on systems that are supposed to be
+stable and they are more risky to run than any of the other branches (make
+sure you have up-to-date backups -- that goes for any experimental kernel but
+even more so for -mm patches or using a Kernel from the linux-next tree).
+
+Testing of -mm patches and linux-next is greatly appreciated since the whole
+point of those are to weed out regressions, crashes, data corruption bugs,
+build breakage (and any other bug in general) before changes are merged into
+the more stable mainline Linus tree.
+
+But testers of -mm and linux-next should be aware that breakages are
+more common than in any other tree.
+
+
+This concludes this list of explanations of the various kernel trees.
+I hope you are now clear on how to apply the various patches and help testing
+the kernel.
+
+Thank you's to Randy Dunlap, Rolf Eike Beer, Linus Torvalds, Bodo Eggert,
+Johannes Stezenbach, Grant Coady, Pavel Machek and others that I may have
+forgotten for their reviews and contributions to this document.
diff --git a/Documentation/process/botching-up-ioctls.rst b/Documentation/process/botching-up-ioctls.rst
new file mode 100644
index 000000000..ba4667ab3
--- /dev/null
+++ b/Documentation/process/botching-up-ioctls.rst
@@ -0,0 +1,225 @@
+=================================
+(How to avoid) Botching up ioctls
+=================================
+
+From: https://blog.ffwll.ch/2013/11/botching-up-ioctls.html
+
+By: Daniel Vetter, Copyright © 2013 Intel Corporation
+
+One clear insight kernel graphics hackers gained in the past few years is that
+trying to come up with a unified interface to manage the execution units and
+memory on completely different GPUs is a futile effort. So nowadays every
+driver has its own set of ioctls to allocate memory and submit work to the GPU.
+Which is nice, since there's no more insanity in the form of fake-generic, but
+actually only used once interfaces. But the clear downside is that there's much
+more potential to screw things up.
+
+To avoid repeating all the same mistakes again I've written up some of the
+lessons learned while botching the job for the drm/i915 driver. Most of these
+only cover technicalities and not the big-picture issues like what the command
+submission ioctl exactly should look like. Learning these lessons is probably
+something every GPU driver has to do on its own.
+
+
+Prerequisites
+-------------
+
+First the prerequisites. Without these you have already failed, because you
+will need to add a 32-bit compat layer:
+
+ * Only use fixed sized integers. To avoid conflicts with typedefs in userspace
+   the kernel has special types like __u32, __s64. Use them.
+
+ * Align everything to the natural size and use explicit padding. 32-bit
+   platforms don't necessarily align 64-bit values to 64-bit boundaries, but
+   64-bit platforms do. So we always need padding to the natural size to get
+   this right.
+
+ * Pad the entire struct to a multiple of 64-bits if the structure contains
+   64-bit types - the structure size will otherwise differ on 32-bit versus
+   64-bit. Having a different structure size hurts when passing arrays of
+   structures to the kernel, or if the kernel checks the structure size, which
+   e.g. the drm core does.
+
+ * Pointers are __u64, cast from/to a uintprt_t on the userspace side and
+   from/to a void __user * in the kernel. Try really hard not to delay this
+   conversion or worse, fiddle the raw __u64 through your code since that
+   diminishes the checking tools like sparse can provide. The macro
+   u64_to_user_ptr can be used in the kernel to avoid warnings about integers
+   and pointers of different sizes.
+
+
+Basics
+------
+
+With the joys of writing a compat layer avoided we can take a look at the basic
+fumbles. Neglecting these will make backward and forward compatibility a real
+pain. And since getting things wrong on the first attempt is guaranteed you
+will have a second iteration or at least an extension for any given interface.
+
+ * Have a clear way for userspace to figure out whether your new ioctl or ioctl
+   extension is supported on a given kernel. If you can't rely on old kernels
+   rejecting the new flags/modes or ioctls (since doing that was botched in the
+   past) then you need a driver feature flag or revision number somewhere.
+
+ * Have a plan for extending ioctls with new flags or new fields at the end of
+   the structure. The drm core checks the passed-in size for each ioctl call
+   and zero-extends any mismatches between kernel and userspace. That helps,
+   but isn't a complete solution since newer userspace on older kernels won't
+   notice that the newly added fields at the end get ignored. So this still
+   needs a new driver feature flags.
+
+ * Check all unused fields and flags and all the padding for whether it's 0,
+   and reject the ioctl if that's not the case. Otherwise your nice plan for
+   future extensions is going right down the gutters since someone will submit
+   an ioctl struct with random stack garbage in the yet unused parts. Which
+   then bakes in the ABI that those fields can never be used for anything else
+   but garbage. This is also the reason why you must explicitly pad all
+   structures, even if you never use them in an array - the padding the compiler
+   might insert could contain garbage.
+
+ * Have simple testcases for all of the above.
+
+
+Fun with Error Paths
+--------------------
+
+Nowadays we don't have any excuse left any more for drm drivers being neat
+little root exploits. This means we both need full input validation and solid
+error handling paths - GPUs will die eventually in the oddmost corner cases
+anyway:
+
+ * The ioctl must check for array overflows. Also it needs to check for
+   over/underflows and clamping issues of integer values in general. The usual
+   example is sprite positioning values fed directly into the hardware with the
+   hardware just having 12 bits or so. Works nicely until some odd display
+   server doesn't bother with clamping itself and the cursor wraps around the
+   screen.
+
+ * Have simple testcases for every input validation failure case in your ioctl.
+   Check that the error code matches your expectations. And finally make sure
+   that you only test for one single error path in each subtest by submitting
+   otherwise perfectly valid data. Without this an earlier check might reject
+   the ioctl already and shadow the codepath you actually want to test, hiding
+   bugs and regressions.
+
+ * Make all your ioctls restartable. First X really loves signals and second
+   this will allow you to test 90% of all error handling paths by just
+   interrupting your main test suite constantly with signals. Thanks to X's
+   love for signal you'll get an excellent base coverage of all your error
+   paths pretty much for free for graphics drivers. Also, be consistent with
+   how you handle ioctl restarting - e.g. drm has a tiny drmIoctl helper in its
+   userspace library. The i915 driver botched this with the set_tiling ioctl,
+   now we're stuck forever with some arcane semantics in both the kernel and
+   userspace.
+
+ * If you can't make a given codepath restartable make a stuck task at least
+   killable. GPUs just die and your users won't like you more if you hang their
+   entire box (by means of an unkillable X process). If the state recovery is
+   still too tricky have a timeout or hangcheck safety net as a last-ditch
+   effort in case the hardware has gone bananas.
+
+ * Have testcases for the really tricky corner cases in your error recovery code
+   - it's way too easy to create a deadlock between your hangcheck code and
+   waiters.
+
+
+Time, Waiting and Missing it
+----------------------------
+
+GPUs do most everything asynchronously, so we have a need to time operations and
+wait for outstanding ones. This is really tricky business; at the moment none of
+the ioctls supported by the drm/i915 get this fully right, which means there's
+still tons more lessons to learn here.
+
+ * Use CLOCK_MONOTONIC as your reference time, always. It's what alsa, drm and
+   v4l use by default nowadays. But let userspace know which timestamps are
+   derived from different clock domains like your main system clock (provided
+   by the kernel) or some independent hardware counter somewhere else. Clocks
+   will mismatch if you look close enough, but if performance measuring tools
+   have this information they can at least compensate. If your userspace can
+   get at the raw values of some clocks (e.g. through in-command-stream
+   performance counter sampling instructions) consider exposing those also.
+
+ * Use __s64 seconds plus __u64 nanoseconds to specify time. It's not the most
+   convenient time specification, but it's mostly the standard.
+
+ * Check that input time values are normalized and reject them if not. Note
+   that the kernel native struct ktime has a signed integer for both seconds
+   and nanoseconds, so beware here.
+
+ * For timeouts, use absolute times. If you're a good fellow and made your
+   ioctl restartable relative timeouts tend to be too coarse and can
+   indefinitely extend your wait time due to rounding on each restart.
+   Especially if your reference clock is something really slow like the display
+   frame counter. With a spec lawyer hat on this isn't a bug since timeouts can
+   always be extended - but users will surely hate you if their neat animations
+   starts to stutter due to this.
+
+ * Consider ditching any synchronous wait ioctls with timeouts and just deliver
+   an asynchronous event on a pollable file descriptor. It fits much better
+   into event driven applications' main loop.
+
+ * Have testcases for corner-cases, especially whether the return values for
+   already-completed events, successful waits and timed-out waits are all sane
+   and suiting to your needs.
+
+
+Leaking Resources, Not
+----------------------
+
+A full-blown drm driver essentially implements a little OS, but specialized to
+the given GPU platforms. This means a driver needs to expose tons of handles
+for different objects and other resources to userspace. Doing that right
+entails its own little set of pitfalls:
+
+ * Always attach the lifetime of your dynamically created resources to the
+   lifetime of a file descriptor. Consider using a 1:1 mapping if your resource
+   needs to be shared across processes -  fd-passing over unix domain sockets
+   also simplifies lifetime management for userspace.
+
+ * Always have O_CLOEXEC support.
+
+ * Ensure that you have sufficient insulation between different clients. By
+   default pick a private per-fd namespace which forces any sharing to be done
+   explicitly. Only go with a more global per-device namespace if the objects
+   are truly device-unique. One counterexample in the drm modeset interfaces is
+   that the per-device modeset objects like connectors share a namespace with
+   framebuffer objects, which mostly are not shared at all. A separate
+   namespace, private by default, for framebuffers would have been more
+   suitable.
+
+ * Think about uniqueness requirements for userspace handles. E.g. for most drm
+   drivers it's a userspace bug to submit the same object twice in the same
+   command submission ioctl. But then if objects are shareable userspace needs
+   to know whether it has seen an imported object from a different process
+   already or not. I haven't tried this myself yet due to lack of a new class
+   of objects, but consider using inode numbers on your shared file descriptors
+   as unique identifiers - it's how real files are told apart, too.
+   Unfortunately this requires a full-blown virtual filesystem in the kernel.
+
+
+Last, but not Least
+-------------------
+
+Not every problem needs a new ioctl:
+
+ * Think hard whether you really want a driver-private interface. Of course
+   it's much quicker to push a driver-private interface than engaging in
+   lengthy discussions for a more generic solution. And occasionally doing a
+   private interface to spearhead a new concept is what's required. But in the
+   end, once the generic interface comes around you'll end up maintainer two
+   interfaces. Indefinitely.
+
+ * Consider other interfaces than ioctls. A sysfs attribute is much better for
+   per-device settings, or for child objects with fairly static lifetimes (like
+   output connectors in drm with all the detection override attributes). Or
+   maybe only your testsuite needs this interface, and then debugfs with its
+   disclaimer of not having a stable ABI would be better.
+
+Finally, the name of the game is to get it right on the first attempt, since if
+your driver proves popular and your hardware platforms long-lived then you'll
+be stuck with a given ioctl essentially forever. You can try to deprecate
+horrible ioctls on newer iterations of your hardware, but generally it takes
+years to accomplish this. And then again years until the last user able to
+complain about regressions disappears, too.
diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst
new file mode 100644
index 000000000..dac17711d
--- /dev/null
+++ b/Documentation/process/changes.rst
@@ -0,0 +1,492 @@
+.. _changes:
+
+Minimal requirements to compile the Kernel
+++++++++++++++++++++++++++++++++++++++++++
+
+Intro
+=====
+
+This document is designed to provide a list of the minimum levels of
+software necessary to run the 4.x kernels.
+
+This document is originally based on my "Changes" file for 2.0.x kernels
+and therefore owes credit to the same people as that file (Jared Mauch,
+Axel Boldt, Alessandro Sigala, and countless other users all over the
+'net).
+
+Current Minimal Requirements
+****************************
+
+Upgrade to at **least** these software revisions before thinking you've
+encountered a bug!  If you're unsure what version you're currently
+running, the suggested command should tell you.
+
+Again, keep in mind that this list assumes you are already functionally
+running a Linux kernel.  Also, not all tools are necessary on all
+systems; obviously, if you don't have any PC Card hardware, for example,
+you probably needn't concern yourself with pcmciautils.
+
+====================== ===============  ========================================
+        Program        Minimal version       Command to check the version
+====================== ===============  ========================================
+GNU C                  4.9              gcc --version
+Clang/LLVM (optional)  10.0.1           clang --version
+GNU make               3.81             make --version
+binutils               2.23             ld -v
+flex                   2.5.35           flex --version
+bison                  2.0              bison --version
+util-linux             2.10o            fdformat --version
+kmod                   13               depmod -V
+e2fsprogs              1.41.4           e2fsck -V
+jfsutils               1.1.3            fsck.jfs -V
+reiserfsprogs          3.6.3            reiserfsck -V
+xfsprogs               2.6.0            xfs_db -V
+squashfs-tools         4.0              mksquashfs -version
+btrfs-progs            0.18             btrfsck
+pcmciautils            004              pccardctl -V
+quota-tools            3.09             quota -V
+PPP                    2.4.0            pppd --version
+nfs-utils              1.0.5            showmount --version
+procps                 3.2.0            ps --version
+oprofile               0.9              oprofiled --version
+udev                   081              udevd --version
+grub                   0.93             grub --version || grub-install --version
+mcelog                 0.6              mcelog --version
+iptables               1.4.2            iptables -V
+openssl & libcrypto    1.0.0            openssl version
+bc                     1.06.95          bc --version
+Sphinx\ [#f1]_	       1.3		sphinx-build --version
+====================== ===============  ========================================
+
+.. [#f1] Sphinx is needed only to build the Kernel documentation
+
+Kernel compilation
+******************
+
+GCC
+---
+
+The gcc version requirements may vary depending on the type of CPU in your
+computer.
+
+Clang/LLVM (optional)
+---------------------
+
+The latest formal release of clang and LLVM utils (according to
+`releases.llvm.org <https://releases.llvm.org>`_) are supported for building
+kernels. Older releases aren't guaranteed to work, and we may drop workarounds
+from the kernel that were used to support older versions. Please see additional
+docs on :ref:`Building Linux with Clang/LLVM <kbuild_llvm>`.
+
+Make
+----
+
+You will need GNU make 3.81 or later to build the kernel.
+
+Binutils
+--------
+
+Binutils 2.23 or newer is needed to build the kernel.
+
+pkg-config
+----------
+
+The build system, as of 4.18, requires pkg-config to check for installed
+kconfig tools and to determine flags settings for use in
+'make {g,x}config'.  Previously pkg-config was being used but not
+verified or documented.
+
+Flex
+----
+
+Since Linux 4.16, the build system generates lexical analyzers
+during build.  This requires flex 2.5.35 or later.
+
+
+Bison
+-----
+
+Since Linux 4.16, the build system generates parsers
+during build.  This requires bison 2.0 or later.
+
+Perl
+----
+
+You will need perl 5 and the following modules: ``Getopt::Long``,
+``Getopt::Std``, ``File::Basename``, and ``File::Find`` to build the kernel.
+
+BC
+--
+
+You will need bc to build kernels 3.10 and higher
+
+
+OpenSSL
+-------
+
+Module signing and external certificate handling use the OpenSSL program and
+crypto library to do key creation and signature generation.
+
+You will need openssl to build kernels 3.7 and higher if module signing is
+enabled.  You will also need openssl development packages to build kernels 4.3
+and higher.
+
+
+System utilities
+****************
+
+Architectural changes
+---------------------
+
+DevFS has been obsoleted in favour of udev
+(https://www.kernel.org/pub/linux/utils/kernel/hotplug/)
+
+32-bit UID support is now in place.  Have fun!
+
+Linux documentation for functions is transitioning to inline
+documentation via specially-formatted comments near their
+definitions in the source.  These comments can be combined with ReST
+files the Documentation/ directory to make enriched documentation, which can
+then be converted to PostScript, HTML, LaTex, ePUB and PDF files.
+In order to convert from ReST format to a format of your choice, you'll need
+Sphinx.
+
+Util-linux
+----------
+
+New versions of util-linux provide ``fdisk`` support for larger disks,
+support new options to mount, recognize more supported partition
+types, have a fdformat which works with 2.4 kernels, and similar goodies.
+You'll probably want to upgrade.
+
+Ksymoops
+--------
+
+If the unthinkable happens and your kernel oopses, you may need the
+ksymoops tool to decode it, but in most cases you don't.
+It is generally preferred to build the kernel with ``CONFIG_KALLSYMS`` so
+that it produces readable dumps that can be used as-is (this also
+produces better output than ksymoops).  If for some reason your kernel
+is not build with ``CONFIG_KALLSYMS`` and you have no way to rebuild and
+reproduce the Oops with that option, then you can still decode that Oops
+with ksymoops.
+
+Mkinitrd
+--------
+
+These changes to the ``/lib/modules`` file tree layout also require that
+mkinitrd be upgraded.
+
+E2fsprogs
+---------
+
+The latest version of ``e2fsprogs`` fixes several bugs in fsck and
+debugfs.  Obviously, it's a good idea to upgrade.
+
+JFSutils
+--------
+
+The ``jfsutils`` package contains the utilities for the file system.
+The following utilities are available:
+
+- ``fsck.jfs`` - initiate replay of the transaction log, and check
+  and repair a JFS formatted partition.
+
+- ``mkfs.jfs`` - create a JFS formatted partition.
+
+- other file system utilities are also available in this package.
+
+Reiserfsprogs
+-------------
+
+The reiserfsprogs package should be used for reiserfs-3.6.x
+(Linux kernels 2.4.x). It is a combined package and contains working
+versions of ``mkreiserfs``, ``resize_reiserfs``, ``debugreiserfs`` and
+``reiserfsck``. These utils work on both i386 and alpha platforms.
+
+Xfsprogs
+--------
+
+The latest version of ``xfsprogs`` contains ``mkfs.xfs``, ``xfs_db``, and the
+``xfs_repair`` utilities, among others, for the XFS filesystem.  It is
+architecture independent and any version from 2.0.0 onward should
+work correctly with this version of the XFS kernel code (2.6.0 or
+later is recommended, due to some significant improvements).
+
+PCMCIAutils
+-----------
+
+PCMCIAutils replaces ``pcmcia-cs``. It properly sets up
+PCMCIA sockets at system startup and loads the appropriate modules
+for 16-bit PCMCIA devices if the kernel is modularized and the hotplug
+subsystem is used.
+
+Quota-tools
+-----------
+
+Support for 32 bit uid's and gid's is required if you want to use
+the newer version 2 quota format.  Quota-tools version 3.07 and
+newer has this support.  Use the recommended version or newer
+from the table above.
+
+Intel IA32 microcode
+--------------------
+
+A driver has been added to allow updating of Intel IA32 microcode,
+accessible as a normal (misc) character device.  If you are not using
+udev you may need to::
+
+  mkdir /dev/cpu
+  mknod /dev/cpu/microcode c 10 184
+  chmod 0644 /dev/cpu/microcode
+
+as root before you can use this.  You'll probably also want to
+get the user-space microcode_ctl utility to use with this.
+
+udev
+----
+
+``udev`` is a userspace application for populating ``/dev`` dynamically with
+only entries for devices actually present. ``udev`` replaces the basic
+functionality of devfs, while allowing persistent device naming for
+devices.
+
+FUSE
+----
+
+Needs libfuse 2.4.0 or later.  Absolute minimum is 2.3.0 but mount
+options ``direct_io`` and ``kernel_cache`` won't work.
+
+Networking
+**********
+
+General changes
+---------------
+
+If you have advanced network configuration needs, you should probably
+consider using the network tools from ip-route2.
+
+Packet Filter / NAT
+-------------------
+The packet filtering and NAT code uses the same tools like the previous 2.4.x
+kernel series (iptables).  It still includes backwards-compatibility modules
+for 2.2.x-style ipchains and 2.0.x-style ipfwadm.
+
+PPP
+---
+
+The PPP driver has been restructured to support multilink and to
+enable it to operate over diverse media layers.  If you use PPP,
+upgrade pppd to at least 2.4.0.
+
+If you are not using udev, you must have the device file /dev/ppp
+which can be made by::
+
+  mknod /dev/ppp c 108 0
+
+as root.
+
+NFS-utils
+---------
+
+In ancient (2.4 and earlier) kernels, the nfs server needed to know
+about any client that expected to be able to access files via NFS.  This
+information would be given to the kernel by ``mountd`` when the client
+mounted the filesystem, or by ``exportfs`` at system startup.  exportfs
+would take information about active clients from ``/var/lib/nfs/rmtab``.
+
+This approach is quite fragile as it depends on rmtab being correct
+which is not always easy, particularly when trying to implement
+fail-over.  Even when the system is working well, ``rmtab`` suffers from
+getting lots of old entries that never get removed.
+
+With modern kernels we have the option of having the kernel tell mountd
+when it gets a request from an unknown host, and mountd can give
+appropriate export information to the kernel.  This removes the
+dependency on ``rmtab`` and means that the kernel only needs to know about
+currently active clients.
+
+To enable this new functionality, you need to::
+
+  mount -t nfsd nfsd /proc/fs/nfsd
+
+before running exportfs or mountd.  It is recommended that all NFS
+services be protected from the internet-at-large by a firewall where
+that is possible.
+
+mcelog
+------
+
+On x86 kernels the mcelog utility is needed to process and log machine check
+events when ``CONFIG_X86_MCE`` is enabled. Machine check events are errors
+reported by the CPU. Processing them is strongly encouraged.
+
+Kernel documentation
+********************
+
+Sphinx
+------
+
+Please see :ref:`sphinx_install` in :ref:`Documentation/doc-guide/sphinx.rst <sphinxdoc>`
+for details about Sphinx requirements.
+
+Getting updated software
+========================
+
+Kernel compilation
+******************
+
+gcc
+---
+
+- <ftp://ftp.gnu.org/gnu/gcc/>
+
+Clang/LLVM
+----------
+
+- :ref:`Getting LLVM <getting_llvm>`.
+
+Make
+----
+
+- <ftp://ftp.gnu.org/gnu/make/>
+
+Binutils
+--------
+
+- <https://www.kernel.org/pub/linux/devel/binutils/>
+
+Flex
+----
+
+- <https://github.com/westes/flex/releases>
+
+Bison
+-----
+
+- <ftp://ftp.gnu.org/gnu/bison/>
+
+OpenSSL
+-------
+
+- <https://www.openssl.org/>
+
+System utilities
+****************
+
+Util-linux
+----------
+
+- <https://www.kernel.org/pub/linux/utils/util-linux/>
+
+Kmod
+----
+
+- <https://www.kernel.org/pub/linux/utils/kernel/kmod/>
+- <https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git>
+
+Ksymoops
+--------
+
+- <https://www.kernel.org/pub/linux/utils/kernel/ksymoops/v2.4/>
+
+Mkinitrd
+--------
+
+- <https://code.launchpad.net/initrd-tools/main>
+
+E2fsprogs
+---------
+
+- <https://www.kernel.org/pub/linux/kernel/people/tytso/e2fsprogs/>
+- <https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git/>
+
+JFSutils
+--------
+
+- <http://jfs.sourceforge.net/>
+
+Reiserfsprogs
+-------------
+
+- <https://git.kernel.org/pub/scm/linux/kernel/git/jeffm/reiserfsprogs.git/>
+
+Xfsprogs
+--------
+
+- <https://git.kernel.org/pub/scm/fs/xfs/xfsprogs-dev.git>
+- <https://www.kernel.org/pub/linux/utils/fs/xfs/xfsprogs/>
+
+Pcmciautils
+-----------
+
+- <https://www.kernel.org/pub/linux/utils/kernel/pcmcia/>
+
+Quota-tools
+-----------
+
+- <http://sourceforge.net/projects/linuxquota/>
+
+
+Intel P6 microcode
+------------------
+
+- <https://downloadcenter.intel.com/>
+
+udev
+----
+
+- <https://www.freedesktop.org/software/systemd/man/udev.html>
+
+FUSE
+----
+
+- <https://github.com/libfuse/libfuse/releases>
+
+mcelog
+------
+
+- <http://www.mcelog.org/>
+
+Networking
+**********
+
+PPP
+---
+
+- <https://download.samba.org/pub/ppp/>
+- <https://git.ozlabs.org/?p=ppp.git>
+- <https://github.com/paulusmack/ppp/>
+
+NFS-utils
+---------
+
+- <http://sourceforge.net/project/showfiles.php?group_id=14>
+
+Iptables
+--------
+
+- <https://netfilter.org/projects/iptables/index.html>
+
+Ip-route2
+---------
+
+- <https://www.kernel.org/pub/linux/utils/net/iproute2/>
+
+OProfile
+--------
+
+- <http://oprofile.sf.net/download/>
+
+NFS-Utils
+---------
+
+- <http://nfs.sourceforge.net/>
+
+Kernel documentation
+********************
+
+Sphinx
+------
+
+- <https://www.sphinx-doc.org/>
diff --git a/Documentation/process/clang-format.rst b/Documentation/process/clang-format.rst
new file mode 100644
index 000000000..82676e5a7
--- /dev/null
+++ b/Documentation/process/clang-format.rst
@@ -0,0 +1,184 @@
+.. _clangformat:
+
+clang-format
+============
+
+``clang-format`` is a tool to format C/C++/... code according to
+a set of rules and heuristics. Like most tools, it is not perfect
+nor covers every single case, but it is good enough to be helpful.
+
+``clang-format`` can be used for several purposes:
+
+  - Quickly reformat a block of code to the kernel style. Specially useful
+    when moving code around and aligning/sorting. See clangformatreformat_.
+
+  - Spot style mistakes, typos and possible improvements in files
+    you maintain, patches you review, diffs, etc. See clangformatreview_.
+
+  - Help you follow the coding style rules, specially useful for those
+    new to kernel development or working at the same time in several
+    projects with different coding styles.
+
+Its configuration file is ``.clang-format`` in the root of the kernel tree.
+The rules contained there try to approximate the most common kernel
+coding style. They also try to follow :ref:`Documentation/process/coding-style.rst <codingstyle>`
+as much as possible. Since not all the kernel follows the same style,
+it is possible that you may want to tweak the defaults for a particular
+subsystem or folder. To do so, you can override the defaults by writing
+another ``.clang-format`` file in a subfolder.
+
+The tool itself has already been included in the repositories of popular
+Linux distributions for a long time. Search for ``clang-format`` in
+your repositories. Otherwise, you can either download pre-built
+LLVM/clang binaries or build the source code from:
+
+    https://releases.llvm.org/download.html
+
+See more information about the tool at:
+
+    https://clang.llvm.org/docs/ClangFormat.html
+
+    https://clang.llvm.org/docs/ClangFormatStyleOptions.html
+
+
+.. _clangformatreview:
+
+Review files and patches for coding style
+-----------------------------------------
+
+By running the tool in its inline mode, you can review full subsystems,
+folders or individual files for code style mistakes, typos or improvements.
+
+To do so, you can run something like::
+
+    # Make sure your working directory is clean!
+    clang-format -i kernel/*.[ch]
+
+And then take a look at the git diff.
+
+Counting the lines of such a diff is also useful for improving/tweaking
+the style options in the configuration file; as well as testing new
+``clang-format`` features/versions.
+
+``clang-format`` also supports reading unified diffs, so you can review
+patches and git diffs easily. See the documentation at:
+
+    https://clang.llvm.org/docs/ClangFormat.html#script-for-patch-reformatting
+
+To avoid ``clang-format`` formatting some portion of a file, you can do::
+
+    int formatted_code;
+    // clang-format off
+        void    unformatted_code  ;
+    // clang-format on
+    void formatted_code_again;
+
+While it might be tempting to use this to keep a file always in sync with
+``clang-format``, specially if you are writing new files or if you are
+a maintainer, please note that people might be running different
+``clang-format`` versions or not have it available at all. Therefore,
+you should probably refrain yourself from using this in kernel sources;
+at least until we see if ``clang-format`` becomes commonplace.
+
+
+.. _clangformatreformat:
+
+Reformatting blocks of code
+---------------------------
+
+By using an integration with your text editor, you can reformat arbitrary
+blocks (selections) of code with a single keystroke. This is specially
+useful when moving code around, for complex code that is deeply intended,
+for multi-line macros (and aligning their backslashes), etc.
+
+Remember that you can always tweak the changes afterwards in those cases
+where the tool did not do an optimal job. But as a first approximation,
+it can be very useful.
+
+There are integrations for many popular text editors. For some of them,
+like vim, emacs, BBEdit and Visual Studio you can find support built-in.
+For instructions, read the appropiate section at:
+
+    https://clang.llvm.org/docs/ClangFormat.html
+
+For Atom, Eclipse, Sublime Text, Visual Studio Code, XCode and other
+editors and IDEs you should be able to find ready-to-use plugins.
+
+For this use case, consider using a secondary ``.clang-format``
+so that you can tweak a few options. See clangformatextra_.
+
+
+.. _clangformatmissing:
+
+Missing support
+---------------
+
+``clang-format`` is missing support for some things that are common
+in kernel code. They are easy to remember, so if you use the tool
+regularly, you will quickly learn to avoid/ignore those.
+
+In particular, some very common ones you will notice are:
+
+  - Aligned blocks of one-line ``#defines``, e.g.::
+
+        #define TRACING_MAP_BITS_DEFAULT       11
+        #define TRACING_MAP_BITS_MAX           17
+        #define TRACING_MAP_BITS_MIN           7
+
+    vs.::
+
+        #define TRACING_MAP_BITS_DEFAULT 11
+        #define TRACING_MAP_BITS_MAX 17
+        #define TRACING_MAP_BITS_MIN 7
+
+  - Aligned designated initializers, e.g.::
+
+        static const struct file_operations uprobe_events_ops = {
+                .owner          = THIS_MODULE,
+                .open           = probes_open,
+                .read           = seq_read,
+                .llseek         = seq_lseek,
+                .release        = seq_release,
+                .write          = probes_write,
+        };
+
+    vs.::
+
+        static const struct file_operations uprobe_events_ops = {
+                .owner = THIS_MODULE,
+                .open = probes_open,
+                .read = seq_read,
+                .llseek = seq_lseek,
+                .release = seq_release,
+                .write = probes_write,
+        };
+
+
+.. _clangformatextra:
+
+Extra features/options
+----------------------
+
+Some features/style options are not enabled by default in the configuration
+file in order to minimize the differences between the output and the current
+code. In other words, to make the difference as small as possible,
+which makes reviewing full-file style, as well diffs and patches as easy
+as possible.
+
+In other cases (e.g. particular subsystems/folders/files), the kernel style
+might be different and enabling some of these options may approximate
+better the style there.
+
+For instance:
+
+  - Aligning assignments (``AlignConsecutiveAssignments``).
+
+  - Aligning declarations (``AlignConsecutiveDeclarations``).
+
+  - Reflowing text in comments (``ReflowComments``).
+
+  - Sorting ``#includes`` (``SortIncludes``).
+
+They are typically useful for block re-formatting, rather than full-file.
+You might want to create another ``.clang-format`` file and use that one
+from your editor/IDE instead.
diff --git a/Documentation/process/code-of-conduct-interpretation.rst b/Documentation/process/code-of-conduct-interpretation.rst
new file mode 100644
index 000000000..43da2cc2e
--- /dev/null
+++ b/Documentation/process/code-of-conduct-interpretation.rst
@@ -0,0 +1,156 @@
+.. _code_of_conduct_interpretation:
+
+Linux Kernel Contributor Covenant Code of Conduct Interpretation
+================================================================
+
+The :ref:`code_of_conduct` is a general document meant to
+provide a set of rules for almost any open source community.  Every
+open-source community is unique and the Linux kernel is no exception.
+Because of this, this document describes how we in the Linux kernel
+community will interpret it.  We also do not expect this interpretation
+to be static over time, and will adjust it as needed.
+
+The Linux kernel development effort is a very personal process compared
+to "traditional" ways of developing software.  Your contributions and
+ideas behind them will be carefully reviewed, often resulting in
+critique and criticism.  The review will almost always require
+improvements before the material can be included in the
+kernel.  Know that this happens because everyone involved wants to see
+the best possible solution for the overall success of Linux.  This
+development process has been proven to create the most robust operating
+system kernel ever, and we do not want to do anything to cause the
+quality of submission and eventual result to ever decrease.
+
+Maintainers
+-----------
+
+The Code of Conduct uses the term "maintainers" numerous times.  In the
+kernel community, a "maintainer" is anyone who is responsible for a
+subsystem, driver, or file, and is listed in the MAINTAINERS file in the
+kernel source tree.
+
+Responsibilities
+----------------
+
+The Code of Conduct mentions rights and responsibilities for
+maintainers, and this needs some further clarifications.
+
+First and foremost, it is a reasonable expectation to have maintainers
+lead by example.
+
+That being said, our community is vast and broad, and there is no new
+requirement for maintainers to unilaterally handle how other people
+behave in the parts of the community where they are active.  That
+responsibility is upon all of us, and ultimately the Code of Conduct
+documents final escalation paths in case of unresolved concerns
+regarding conduct issues.
+
+Maintainers should be willing to help when problems occur, and work with
+others in the community when needed.  Do not be afraid to reach out to
+the Technical Advisory Board (TAB) or other maintainers if you're
+uncertain how to handle situations that come up.  It will not be
+considered a violation report unless you want it to be.  If you are
+uncertain about approaching the TAB or any other maintainers, please
+reach out to our conflict mediator, Joanna Lee <jlee@linuxfoundation.org>.
+
+In the end, "be kind to each other" is really what the end goal is for
+everybody.  We know everyone is human and we all fail at times, but the
+primary goal for all of us should be to work toward amicable resolutions
+of problems.  Enforcement of the code of conduct will only be a last
+resort option.
+
+Our goal of creating a robust and technically advanced operating system
+and the technical complexity involved naturally require expertise and
+decision-making.
+
+The required expertise varies depending on the area of contribution.  It
+is determined mainly by context and technical complexity and only
+secondary by the expectations of contributors and maintainers.
+
+Both the expertise expectations and decision-making are subject to
+discussion, but at the very end there is a basic necessity to be able to
+make decisions in order to make progress.  This prerogative is in the
+hands of maintainers and project's leadership and is expected to be used
+in good faith.
+
+As a consequence, setting expertise expectations, making decisions and
+rejecting unsuitable contributions are not viewed as a violation of the
+Code of Conduct.
+
+While maintainers are in general welcoming to newcomers, their capacity
+of helping contributors overcome the entry hurdles is limited, so they
+have to set priorities.  This, also, is not to be seen as a violation of
+the Code of Conduct.  The kernel community is aware of that and provides
+entry level programs in various forms like kernelnewbies.org.
+
+Scope
+-----
+
+The Linux kernel community primarily interacts on a set of public email
+lists distributed around a number of different servers controlled by a
+number of different companies or individuals.  All of these lists are
+defined in the MAINTAINERS file in the kernel source tree.  Any emails
+sent to those mailing lists are considered covered by the Code of
+Conduct.
+
+Developers who use the kernel.org bugzilla, and other subsystem bugzilla
+or bug tracking tools should follow the guidelines of the Code of
+Conduct.  The Linux kernel community does not have an "official" project
+email address, or "official" social media address.  Any activity
+performed using a kernel.org email account must follow the Code of
+Conduct as published for kernel.org, just as any individual using a
+corporate email account must follow the specific rules of that
+corporation.
+
+The Code of Conduct does not prohibit continuing to include names, email
+addresses, and associated comments in mailing list messages, kernel
+change log messages, or code comments.
+
+Interaction in other forums is covered by whatever rules apply to said
+forums and is in general not covered by the Code of Conduct.  Exceptions
+may be considered for extreme circumstances.
+
+Contributions submitted for the kernel should use appropriate language.
+Content that already exists predating the Code of Conduct will not be
+addressed now as a violation.  Inappropriate language can be seen as a
+bug, though; such bugs will be fixed more quickly if any interested
+parties submit patches to that effect.  Expressions that are currently
+part of the user/kernel API, or reflect terminology used in published
+standards or specifications, are not considered bugs.
+
+Enforcement
+-----------
+
+The address listed in the Code of Conduct goes to the Code of Conduct
+Committee.  The exact members receiving these emails at any given time
+are listed at https://kernel.org/code-of-conduct.html.  Members can not
+access reports made before they joined or after they have left the
+committee.
+
+The initial Code of Conduct Committee consists of volunteer members of
+the TAB, as well as a professional mediator acting as a neutral third
+party.  The first task of the committee is to establish documented
+processes, which will be made public.
+
+Any member of the committee, including the mediator, can be contacted
+directly if a reporter does not wish to include the full committee in a
+complaint or concern.
+
+The Code of Conduct Committee reviews the cases according to the
+processes (see above) and consults with the TAB as needed and
+appropriate, for instance to request and receive information about the
+kernel community.
+
+Any decisions by the committee will be brought to the TAB, for
+implementation of enforcement with the relevant maintainers if needed.
+A decision by the Code of Conduct Committee can be overturned by the TAB
+by a two-thirds vote.
+
+At quarterly intervals, the Code of Conduct Committee and TAB will
+provide a report summarizing the anonymised reports that the Code of
+Conduct committee has received and their status, as well details of any
+overridden decisions including complete and identifiable voting details.
+
+We expect to establish a different process for Code of Conduct Committee
+staffing beyond the bootstrap period.  This document will be updated
+with that information when this occurs.
diff --git a/Documentation/process/code-of-conduct.rst b/Documentation/process/code-of-conduct.rst
new file mode 100644
index 000000000..be50294ae
--- /dev/null
+++ b/Documentation/process/code-of-conduct.rst
@@ -0,0 +1,86 @@
+.. _code_of_conduct:
+
+Contributor Covenant Code of Conduct
+++++++++++++++++++++++++++++++++++++
+
+Our Pledge
+==========
+
+In the interest of fostering an open and welcoming environment, we as
+contributors and maintainers pledge to making participation in our project and
+our community a harassment-free experience for everyone, regardless of age, body
+size, disability, ethnicity, sex characteristics, gender identity and
+expression, level of experience, education, socio-economic status, nationality,
+personal appearance, race, religion, or sexual identity and orientation.
+
+Our Standards
+=============
+
+Examples of behavior that contributes to creating a positive environment
+include:
+
+* Using welcoming and inclusive language
+* Being respectful of differing viewpoints and experiences
+* Gracefully accepting constructive criticism
+* Focusing on what is best for the community
+* Showing empathy towards other community members
+
+
+Examples of unacceptable behavior by participants include:
+
+* The use of sexualized language or imagery and unwelcome sexual attention or
+  advances
+* Trolling, insulting/derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others’ private information, such as a physical or electronic
+  address, without explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+
+Our Responsibilities
+====================
+
+Maintainers are responsible for clarifying the standards of acceptable behavior
+and are expected to take appropriate and fair corrective action in response to
+any instances of unacceptable behavior.
+
+Maintainers have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, or to ban temporarily or permanently any
+contributor for other behaviors that they deem inappropriate, threatening,
+offensive, or harmful.
+
+Scope
+=====
+
+This Code of Conduct applies both within project spaces and in public spaces
+when an individual is representing the project or its community. Examples of
+representing a project or community include using an official project e-mail
+address, posting via an official social media account, or acting as an appointed
+representative at an online or offline event. Representation of a project may be
+further defined and clarified by project maintainers.
+
+Enforcement
+===========
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported by contacting the Code of Conduct Committee at
+<conduct@kernel.org>. All complaints will be reviewed and investigated
+and will result in a response that is deemed necessary and appropriate
+to the circumstances. The Code of Conduct Committee is obligated to
+maintain confidentiality with regard to the reporter of an incident.
+Further details of specific enforcement policies may be posted
+separately.
+
+Attribution
+===========
+
+This Code of Conduct is adapted from the Contributor Covenant, version 1.4,
+available at https://www.contributor-covenant.org/version/1/4/code-of-conduct.html
+
+Interpretation
+==============
+
+See the :ref:`code_of_conduct_interpretation` document for how the Linux
+kernel community will be interpreting this document.
diff --git a/Documentation/process/coding-style.rst b/Documentation/process/coding-style.rst
new file mode 100644
index 000000000..98227226c
--- /dev/null
+++ b/Documentation/process/coding-style.rst
@@ -0,0 +1,1158 @@
+.. _codingstyle:
+
+Linux kernel coding style
+=========================
+
+This is a short document describing the preferred coding style for the
+linux kernel.  Coding style is very personal, and I won't **force** my
+views on anybody, but this is what goes for anything that I have to be
+able to maintain, and I'd prefer it for most other things too.  Please
+at least consider the points made here.
+
+First off, I'd suggest printing out a copy of the GNU coding standards,
+and NOT read it.  Burn them, it's a great symbolic gesture.
+
+Anyway, here goes:
+
+
+1) Indentation
+--------------
+
+Tabs are 8 characters, and thus indentations are also 8 characters.
+There are heretic movements that try to make indentations 4 (or even 2!)
+characters deep, and that is akin to trying to define the value of PI to
+be 3.
+
+Rationale: The whole idea behind indentation is to clearly define where
+a block of control starts and ends.  Especially when you've been looking
+at your screen for 20 straight hours, you'll find it a lot easier to see
+how the indentation works if you have large indentations.
+
+Now, some people will claim that having 8-character indentations makes
+the code move too far to the right, and makes it hard to read on a
+80-character terminal screen.  The answer to that is that if you need
+more than 3 levels of indentation, you're screwed anyway, and should fix
+your program.
+
+In short, 8-char indents make things easier to read, and have the added
+benefit of warning you when you're nesting your functions too deep.
+Heed that warning.
+
+The preferred way to ease multiple indentation levels in a switch statement is
+to align the ``switch`` and its subordinate ``case`` labels in the same column
+instead of ``double-indenting`` the ``case`` labels.  E.g.:
+
+.. code-block:: c
+
+	switch (suffix) {
+	case 'G':
+	case 'g':
+		mem <<= 30;
+		break;
+	case 'M':
+	case 'm':
+		mem <<= 20;
+		break;
+	case 'K':
+	case 'k':
+		mem <<= 10;
+		fallthrough;
+	default:
+		break;
+	}
+
+Don't put multiple statements on a single line unless you have
+something to hide:
+
+.. code-block:: c
+
+	if (condition) do_this;
+	  do_something_everytime;
+
+Don't put multiple assignments on a single line either.  Kernel coding style
+is super simple.  Avoid tricky expressions.
+
+Outside of comments, documentation and except in Kconfig, spaces are never
+used for indentation, and the above example is deliberately broken.
+
+Get a decent editor and don't leave whitespace at the end of lines.
+
+
+2) Breaking long lines and strings
+----------------------------------
+
+Coding style is all about readability and maintainability using commonly
+available tools.
+
+The preferred limit on the length of a single line is 80 columns.
+
+Statements longer than 80 columns should be broken into sensible chunks,
+unless exceeding 80 columns significantly increases readability and does
+not hide information.
+
+Descendants are always substantially shorter than the parent and
+are placed substantially to the right.  A very commonly used style
+is to align descendants to a function open parenthesis.
+
+These same rules are applied to function headers with a long argument list.
+
+However, never break user-visible strings such as printk messages because
+that breaks the ability to grep for them.
+
+
+3) Placing Braces and Spaces
+----------------------------
+
+The other issue that always comes up in C styling is the placement of
+braces.  Unlike the indent size, there are few technical reasons to
+choose one placement strategy over the other, but the preferred way, as
+shown to us by the prophets Kernighan and Ritchie, is to put the opening
+brace last on the line, and put the closing brace first, thusly:
+
+.. code-block:: c
+
+	if (x is true) {
+		we do y
+	}
+
+This applies to all non-function statement blocks (if, switch, for,
+while, do).  E.g.:
+
+.. code-block:: c
+
+	switch (action) {
+	case KOBJ_ADD:
+		return "add";
+	case KOBJ_REMOVE:
+		return "remove";
+	case KOBJ_CHANGE:
+		return "change";
+	default:
+		return NULL;
+	}
+
+However, there is one special case, namely functions: they have the
+opening brace at the beginning of the next line, thus:
+
+.. code-block:: c
+
+	int function(int x)
+	{
+		body of function
+	}
+
+Heretic people all over the world have claimed that this inconsistency
+is ...  well ...  inconsistent, but all right-thinking people know that
+(a) K&R are **right** and (b) K&R are right.  Besides, functions are
+special anyway (you can't nest them in C).
+
+Note that the closing brace is empty on a line of its own, **except** in
+the cases where it is followed by a continuation of the same statement,
+ie a ``while`` in a do-statement or an ``else`` in an if-statement, like
+this:
+
+.. code-block:: c
+
+	do {
+		body of do-loop
+	} while (condition);
+
+and
+
+.. code-block:: c
+
+	if (x == y) {
+		..
+	} else if (x > y) {
+		...
+	} else {
+		....
+	}
+
+Rationale: K&R.
+
+Also, note that this brace-placement also minimizes the number of empty
+(or almost empty) lines, without any loss of readability.  Thus, as the
+supply of new-lines on your screen is not a renewable resource (think
+25-line terminal screens here), you have more empty lines to put
+comments on.
+
+Do not unnecessarily use braces where a single statement will do.
+
+.. code-block:: c
+
+	if (condition)
+		action();
+
+and
+
+.. code-block:: none
+
+	if (condition)
+		do_this();
+	else
+		do_that();
+
+This does not apply if only one branch of a conditional statement is a single
+statement; in the latter case use braces in both branches:
+
+.. code-block:: c
+
+	if (condition) {
+		do_this();
+		do_that();
+	} else {
+		otherwise();
+	}
+
+Also, use braces when a loop contains more than a single simple statement:
+
+.. code-block:: c
+
+	while (condition) {
+		if (test)
+			do_something();
+	}
+
+3.1) Spaces
+***********
+
+Linux kernel style for use of spaces depends (mostly) on
+function-versus-keyword usage.  Use a space after (most) keywords.  The
+notable exceptions are sizeof, typeof, alignof, and __attribute__, which look
+somewhat like functions (and are usually used with parentheses in Linux,
+although they are not required in the language, as in: ``sizeof info`` after
+``struct fileinfo info;`` is declared).
+
+So use a space after these keywords::
+
+	if, switch, case, for, do, while
+
+but not with sizeof, typeof, alignof, or __attribute__.  E.g.,
+
+.. code-block:: c
+
+
+	s = sizeof(struct file);
+
+Do not add spaces around (inside) parenthesized expressions.  This example is
+**bad**:
+
+.. code-block:: c
+
+
+	s = sizeof( struct file );
+
+When declaring pointer data or a function that returns a pointer type, the
+preferred use of ``*`` is adjacent to the data name or function name and not
+adjacent to the type name.  Examples:
+
+.. code-block:: c
+
+
+	char *linux_banner;
+	unsigned long long memparse(char *ptr, char **retptr);
+	char *match_strdup(substring_t *s);
+
+Use one space around (on each side of) most binary and ternary operators,
+such as any of these::
+
+	=  +  -  <  >  *  /  %  |  &  ^  <=  >=  ==  !=  ?  :
+
+but no space after unary operators::
+
+	&  *  +  -  ~  !  sizeof  typeof  alignof  __attribute__  defined
+
+no space before the postfix increment & decrement unary operators::
+
+	++  --
+
+no space after the prefix increment & decrement unary operators::
+
+	++  --
+
+and no space around the ``.`` and ``->`` structure member operators.
+
+Do not leave trailing whitespace at the ends of lines.  Some editors with
+``smart`` indentation will insert whitespace at the beginning of new lines as
+appropriate, so you can start typing the next line of code right away.
+However, some such editors do not remove the whitespace if you end up not
+putting a line of code there, such as if you leave a blank line.  As a result,
+you end up with lines containing trailing whitespace.
+
+Git will warn you about patches that introduce trailing whitespace, and can
+optionally strip the trailing whitespace for you; however, if applying a series
+of patches, this may make later patches in the series fail by changing their
+context lines.
+
+
+4) Naming
+---------
+
+C is a Spartan language, and your naming conventions should follow suit.
+Unlike Modula-2 and Pascal programmers, C programmers do not use cute
+names like ThisVariableIsATemporaryCounter. A C programmer would call that
+variable ``tmp``, which is much easier to write, and not the least more
+difficult to understand.
+
+HOWEVER, while mixed-case names are frowned upon, descriptive names for
+global variables are a must.  To call a global function ``foo`` is a
+shooting offense.
+
+GLOBAL variables (to be used only if you **really** need them) need to
+have descriptive names, as do global functions.  If you have a function
+that counts the number of active users, you should call that
+``count_active_users()`` or similar, you should **not** call it ``cntusr()``.
+
+Encoding the type of a function into the name (so-called Hungarian
+notation) is asinine - the compiler knows the types anyway and can check
+those, and it only confuses the programmer. No wonder Microsoft makes buggy
+programs.
+
+LOCAL variable names should be short, and to the point.  If you have
+some random integer loop counter, it should probably be called ``i``.
+Calling it ``loop_counter`` is non-productive, if there is no chance of it
+being mis-understood.  Similarly, ``tmp`` can be just about any type of
+variable that is used to hold a temporary value.
+
+If you are afraid to mix up your local variable names, you have another
+problem, which is called the function-growth-hormone-imbalance syndrome.
+See chapter 6 (Functions).
+
+For symbol names and documentation, avoid introducing new usage of
+'master / slave' (or 'slave' independent of 'master') and 'blacklist /
+whitelist'.
+
+Recommended replacements for 'master / slave' are:
+    '{primary,main} / {secondary,replica,subordinate}'
+    '{initiator,requester} / {target,responder}'
+    '{controller,host} / {device,worker,proxy}'
+    'leader / follower'
+    'director / performer'
+
+Recommended replacements for 'blacklist/whitelist' are:
+    'denylist / allowlist'
+    'blocklist / passlist'
+
+Exceptions for introducing new usage is to maintain a userspace ABI/API,
+or when updating code for an existing (as of 2020) hardware or protocol
+specification that mandates those terms. For new specifications
+translate specification usage of the terminology to the kernel coding
+standard where possible.
+
+5) Typedefs
+-----------
+
+Please don't use things like ``vps_t``.
+It's a **mistake** to use typedef for structures and pointers. When you see a
+
+.. code-block:: c
+
+
+	vps_t a;
+
+in the source, what does it mean?
+In contrast, if it says
+
+.. code-block:: c
+
+	struct virtual_container *a;
+
+you can actually tell what ``a`` is.
+
+Lots of people think that typedefs ``help readability``. Not so. They are
+useful only for:
+
+ (a) totally opaque objects (where the typedef is actively used to **hide**
+     what the object is).
+
+     Example: ``pte_t`` etc. opaque objects that you can only access using
+     the proper accessor functions.
+
+     .. note::
+
+       Opaqueness and ``accessor functions`` are not good in themselves.
+       The reason we have them for things like pte_t etc. is that there
+       really is absolutely **zero** portably accessible information there.
+
+ (b) Clear integer types, where the abstraction **helps** avoid confusion
+     whether it is ``int`` or ``long``.
+
+     u8/u16/u32 are perfectly fine typedefs, although they fit into
+     category (d) better than here.
+
+     .. note::
+
+       Again - there needs to be a **reason** for this. If something is
+       ``unsigned long``, then there's no reason to do
+
+	typedef unsigned long myflags_t;
+
+     but if there is a clear reason for why it under certain circumstances
+     might be an ``unsigned int`` and under other configurations might be
+     ``unsigned long``, then by all means go ahead and use a typedef.
+
+ (c) when you use sparse to literally create a **new** type for
+     type-checking.
+
+ (d) New types which are identical to standard C99 types, in certain
+     exceptional circumstances.
+
+     Although it would only take a short amount of time for the eyes and
+     brain to become accustomed to the standard types like ``uint32_t``,
+     some people object to their use anyway.
+
+     Therefore, the Linux-specific ``u8/u16/u32/u64`` types and their
+     signed equivalents which are identical to standard types are
+     permitted -- although they are not mandatory in new code of your
+     own.
+
+     When editing existing code which already uses one or the other set
+     of types, you should conform to the existing choices in that code.
+
+ (e) Types safe for use in userspace.
+
+     In certain structures which are visible to userspace, we cannot
+     require C99 types and cannot use the ``u32`` form above. Thus, we
+     use __u32 and similar types in all structures which are shared
+     with userspace.
+
+Maybe there are other cases too, but the rule should basically be to NEVER
+EVER use a typedef unless you can clearly match one of those rules.
+
+In general, a pointer, or a struct that has elements that can reasonably
+be directly accessed should **never** be a typedef.
+
+
+6) Functions
+------------
+
+Functions should be short and sweet, and do just one thing.  They should
+fit on one or two screenfuls of text (the ISO/ANSI screen size is 80x24,
+as we all know), and do one thing and do that well.
+
+The maximum length of a function is inversely proportional to the
+complexity and indentation level of that function.  So, if you have a
+conceptually simple function that is just one long (but simple)
+case-statement, where you have to do lots of small things for a lot of
+different cases, it's OK to have a longer function.
+
+However, if you have a complex function, and you suspect that a
+less-than-gifted first-year high-school student might not even
+understand what the function is all about, you should adhere to the
+maximum limits all the more closely.  Use helper functions with
+descriptive names (you can ask the compiler to in-line them if you think
+it's performance-critical, and it will probably do a better job of it
+than you would have done).
+
+Another measure of the function is the number of local variables.  They
+shouldn't exceed 5-10, or you're doing something wrong.  Re-think the
+function, and split it into smaller pieces.  A human brain can
+generally easily keep track of about 7 different things, anything more
+and it gets confused.  You know you're brilliant, but maybe you'd like
+to understand what you did 2 weeks from now.
+
+In source files, separate functions with one blank line.  If the function is
+exported, the **EXPORT** macro for it should follow immediately after the
+closing function brace line.  E.g.:
+
+.. code-block:: c
+
+	int system_is_up(void)
+	{
+		return system_state == SYSTEM_RUNNING;
+	}
+	EXPORT_SYMBOL(system_is_up);
+
+In function prototypes, include parameter names with their data types.
+Although this is not required by the C language, it is preferred in Linux
+because it is a simple way to add valuable information for the reader.
+
+Do not use the ``extern`` keyword with function prototypes as this makes
+lines longer and isn't strictly necessary.
+
+
+7) Centralized exiting of functions
+-----------------------------------
+
+Albeit deprecated by some people, the equivalent of the goto statement is
+used frequently by compilers in form of the unconditional jump instruction.
+
+The goto statement comes in handy when a function exits from multiple
+locations and some common work such as cleanup has to be done.  If there is no
+cleanup needed then just return directly.
+
+Choose label names which say what the goto does or why the goto exists.  An
+example of a good name could be ``out_free_buffer:`` if the goto frees ``buffer``.
+Avoid using GW-BASIC names like ``err1:`` and ``err2:``, as you would have to
+renumber them if you ever add or remove exit paths, and they make correctness
+difficult to verify anyway.
+
+The rationale for using gotos is:
+
+- unconditional statements are easier to understand and follow
+- nesting is reduced
+- errors by not updating individual exit points when making
+  modifications are prevented
+- saves the compiler work to optimize redundant code away ;)
+
+.. code-block:: c
+
+	int fun(int a)
+	{
+		int result = 0;
+		char *buffer;
+
+		buffer = kmalloc(SIZE, GFP_KERNEL);
+		if (!buffer)
+			return -ENOMEM;
+
+		if (condition1) {
+			while (loop1) {
+				...
+			}
+			result = 1;
+			goto out_free_buffer;
+		}
+		...
+	out_free_buffer:
+		kfree(buffer);
+		return result;
+	}
+
+A common type of bug to be aware of is ``one err bugs`` which look like this:
+
+.. code-block:: c
+
+	err:
+		kfree(foo->bar);
+		kfree(foo);
+		return ret;
+
+The bug in this code is that on some exit paths ``foo`` is NULL.  Normally the
+fix for this is to split it up into two error labels ``err_free_bar:`` and
+``err_free_foo:``:
+
+.. code-block:: c
+
+	 err_free_bar:
+		kfree(foo->bar);
+	 err_free_foo:
+		kfree(foo);
+		return ret;
+
+Ideally you should simulate errors to test all exit paths.
+
+
+8) Commenting
+-------------
+
+Comments are good, but there is also a danger of over-commenting.  NEVER
+try to explain HOW your code works in a comment: it's much better to
+write the code so that the **working** is obvious, and it's a waste of
+time to explain badly written code.
+
+Generally, you want your comments to tell WHAT your code does, not HOW.
+Also, try to avoid putting comments inside a function body: if the
+function is so complex that you need to separately comment parts of it,
+you should probably go back to chapter 6 for a while.  You can make
+small comments to note or warn about something particularly clever (or
+ugly), but try to avoid excess.  Instead, put the comments at the head
+of the function, telling people what it does, and possibly WHY it does
+it.
+
+When commenting the kernel API functions, please use the kernel-doc format.
+See the files at :ref:`Documentation/doc-guide/ <doc_guide>` and
+``scripts/kernel-doc`` for details.
+
+The preferred style for long (multi-line) comments is:
+
+.. code-block:: c
+
+	/*
+	 * This is the preferred style for multi-line
+	 * comments in the Linux kernel source code.
+	 * Please use it consistently.
+	 *
+	 * Description:  A column of asterisks on the left side,
+	 * with beginning and ending almost-blank lines.
+	 */
+
+For files in net/ and drivers/net/ the preferred style for long (multi-line)
+comments is a little different.
+
+.. code-block:: c
+
+	/* The preferred comment style for files in net/ and drivers/net
+	 * looks like this.
+	 *
+	 * It is nearly the same as the generally preferred comment style,
+	 * but there is no initial almost-blank line.
+	 */
+
+It's also important to comment data, whether they are basic types or derived
+types.  To this end, use just one data declaration per line (no commas for
+multiple data declarations).  This leaves you room for a small comment on each
+item, explaining its use.
+
+
+9) You've made a mess of it
+---------------------------
+
+That's OK, we all do.  You've probably been told by your long-time Unix
+user helper that ``GNU emacs`` automatically formats the C sources for
+you, and you've noticed that yes, it does do that, but the defaults it
+uses are less than desirable (in fact, they are worse than random
+typing - an infinite number of monkeys typing into GNU emacs would never
+make a good program).
+
+So, you can either get rid of GNU emacs, or change it to use saner
+values.  To do the latter, you can stick the following in your .emacs file:
+
+.. code-block:: none
+
+  (defun c-lineup-arglist-tabs-only (ignored)
+    "Line up argument lists by tabs, not spaces"
+    (let* ((anchor (c-langelem-pos c-syntactic-element))
+           (column (c-langelem-2nd-pos c-syntactic-element))
+           (offset (- (1+ column) anchor))
+           (steps (floor offset c-basic-offset)))
+      (* (max steps 1)
+         c-basic-offset)))
+
+  (dir-locals-set-class-variables
+   'linux-kernel
+   '((c-mode . (
+          (c-basic-offset . 8)
+          (c-label-minimum-indentation . 0)
+          (c-offsets-alist . (
+                  (arglist-close         . c-lineup-arglist-tabs-only)
+                  (arglist-cont-nonempty .
+		      (c-lineup-gcc-asm-reg c-lineup-arglist-tabs-only))
+                  (arglist-intro         . +)
+                  (brace-list-intro      . +)
+                  (c                     . c-lineup-C-comments)
+                  (case-label            . 0)
+                  (comment-intro         . c-lineup-comment)
+                  (cpp-define-intro      . +)
+                  (cpp-macro             . -1000)
+                  (cpp-macro-cont        . +)
+                  (defun-block-intro     . +)
+                  (else-clause           . 0)
+                  (func-decl-cont        . +)
+                  (inclass               . +)
+                  (inher-cont            . c-lineup-multi-inher)
+                  (knr-argdecl-intro     . 0)
+                  (label                 . -1000)
+                  (statement             . 0)
+                  (statement-block-intro . +)
+                  (statement-case-intro  . +)
+                  (statement-cont        . +)
+                  (substatement          . +)
+                  ))
+          (indent-tabs-mode . t)
+          (show-trailing-whitespace . t)
+          ))))
+
+  (dir-locals-set-directory-class
+   (expand-file-name "~/src/linux-trees")
+   'linux-kernel)
+
+This will make emacs go better with the kernel coding style for C
+files below ``~/src/linux-trees``.
+
+But even if you fail in getting emacs to do sane formatting, not
+everything is lost: use ``indent``.
+
+Now, again, GNU indent has the same brain-dead settings that GNU emacs
+has, which is why you need to give it a few command line options.
+However, that's not too bad, because even the makers of GNU indent
+recognize the authority of K&R (the GNU people aren't evil, they are
+just severely misguided in this matter), so you just give indent the
+options ``-kr -i8`` (stands for ``K&R, 8 character indents``), or use
+``scripts/Lindent``, which indents in the latest style.
+
+``indent`` has a lot of options, and especially when it comes to comment
+re-formatting you may want to take a look at the man page.  But
+remember: ``indent`` is not a fix for bad programming.
+
+Note that you can also use the ``clang-format`` tool to help you with
+these rules, to quickly re-format parts of your code automatically,
+and to review full files in order to spot coding style mistakes,
+typos and possible improvements. It is also handy for sorting ``#includes``,
+for aligning variables/macros, for reflowing text and other similar tasks.
+See the file :ref:`Documentation/process/clang-format.rst <clangformat>`
+for more details.
+
+
+10) Kconfig configuration files
+-------------------------------
+
+For all of the Kconfig* configuration files throughout the source tree,
+the indentation is somewhat different.  Lines under a ``config`` definition
+are indented with one tab, while help text is indented an additional two
+spaces.  Example::
+
+  config AUDIT
+	bool "Auditing support"
+	depends on NET
+	help
+	  Enable auditing infrastructure that can be used with another
+	  kernel subsystem, such as SELinux (which requires this for
+	  logging of avc messages output).  Does not do system-call
+	  auditing without CONFIG_AUDITSYSCALL.
+
+Seriously dangerous features (such as write support for certain
+filesystems) should advertise this prominently in their prompt string::
+
+  config ADFS_FS_RW
+	bool "ADFS write support (DANGEROUS)"
+	depends on ADFS_FS
+	...
+
+For full documentation on the configuration files, see the file
+Documentation/kbuild/kconfig-language.rst.
+
+
+11) Data structures
+-------------------
+
+Data structures that have visibility outside the single-threaded
+environment they are created and destroyed in should always have
+reference counts.  In the kernel, garbage collection doesn't exist (and
+outside the kernel garbage collection is slow and inefficient), which
+means that you absolutely **have** to reference count all your uses.
+
+Reference counting means that you can avoid locking, and allows multiple
+users to have access to the data structure in parallel - and not having
+to worry about the structure suddenly going away from under them just
+because they slept or did something else for a while.
+
+Note that locking is **not** a replacement for reference counting.
+Locking is used to keep data structures coherent, while reference
+counting is a memory management technique.  Usually both are needed, and
+they are not to be confused with each other.
+
+Many data structures can indeed have two levels of reference counting,
+when there are users of different ``classes``.  The subclass count counts
+the number of subclass users, and decrements the global count just once
+when the subclass count goes to zero.
+
+Examples of this kind of ``multi-level-reference-counting`` can be found in
+memory management (``struct mm_struct``: mm_users and mm_count), and in
+filesystem code (``struct super_block``: s_count and s_active).
+
+Remember: if another thread can find your data structure, and you don't
+have a reference count on it, you almost certainly have a bug.
+
+
+12) Macros, Enums and RTL
+-------------------------
+
+Names of macros defining constants and labels in enums are capitalized.
+
+.. code-block:: c
+
+	#define CONSTANT 0x12345
+
+Enums are preferred when defining several related constants.
+
+CAPITALIZED macro names are appreciated but macros resembling functions
+may be named in lower case.
+
+Generally, inline functions are preferable to macros resembling functions.
+
+Macros with multiple statements should be enclosed in a do - while block:
+
+.. code-block:: c
+
+	#define macrofun(a, b, c)			\
+		do {					\
+			if (a == 5)			\
+				do_this(b, c);		\
+		} while (0)
+
+Things to avoid when using macros:
+
+1) macros that affect control flow:
+
+.. code-block:: c
+
+	#define FOO(x)					\
+		do {					\
+			if (blah(x) < 0)		\
+				return -EBUGGERED;	\
+		} while (0)
+
+is a **very** bad idea.  It looks like a function call but exits the ``calling``
+function; don't break the internal parsers of those who will read the code.
+
+2) macros that depend on having a local variable with a magic name:
+
+.. code-block:: c
+
+	#define FOO(val) bar(index, val)
+
+might look like a good thing, but it's confusing as hell when one reads the
+code and it's prone to breakage from seemingly innocent changes.
+
+3) macros with arguments that are used as l-values: FOO(x) = y; will
+bite you if somebody e.g. turns FOO into an inline function.
+
+4) forgetting about precedence: macros defining constants using expressions
+must enclose the expression in parentheses. Beware of similar issues with
+macros using parameters.
+
+.. code-block:: c
+
+	#define CONSTANT 0x4000
+	#define CONSTEXP (CONSTANT | 3)
+
+5) namespace collisions when defining local variables in macros resembling
+functions:
+
+.. code-block:: c
+
+	#define FOO(x)				\
+	({					\
+		typeof(x) ret;			\
+		ret = calc_ret(x);		\
+		(ret);				\
+	})
+
+ret is a common name for a local variable - __foo_ret is less likely
+to collide with an existing variable.
+
+The cpp manual deals with macros exhaustively. The gcc internals manual also
+covers RTL which is used frequently with assembly language in the kernel.
+
+
+13) Printing kernel messages
+----------------------------
+
+Kernel developers like to be seen as literate. Do mind the spelling
+of kernel messages to make a good impression. Do not use incorrect
+contractions like ``dont``; use ``do not`` or ``don't`` instead. Make the
+messages concise, clear, and unambiguous.
+
+Kernel messages do not have to be terminated with a period.
+
+Printing numbers in parentheses (%d) adds no value and should be avoided.
+
+There are a number of driver model diagnostic macros in <linux/device.h>
+which you should use to make sure messages are matched to the right device
+and driver, and are tagged with the right level:  dev_err(), dev_warn(),
+dev_info(), and so forth.  For messages that aren't associated with a
+particular device, <linux/printk.h> defines pr_notice(), pr_info(),
+pr_warn(), pr_err(), etc.
+
+Coming up with good debugging messages can be quite a challenge; and once
+you have them, they can be a huge help for remote troubleshooting.  However
+debug message printing is handled differently than printing other non-debug
+messages.  While the other pr_XXX() functions print unconditionally,
+pr_debug() does not; it is compiled out by default, unless either DEBUG is
+defined or CONFIG_DYNAMIC_DEBUG is set.  That is true for dev_dbg() also,
+and a related convention uses VERBOSE_DEBUG to add dev_vdbg() messages to
+the ones already enabled by DEBUG.
+
+Many subsystems have Kconfig debug options to turn on -DDEBUG in the
+corresponding Makefile; in other cases specific files #define DEBUG.  And
+when a debug message should be unconditionally printed, such as if it is
+already inside a debug-related #ifdef section, printk(KERN_DEBUG ...) can be
+used.
+
+
+14) Allocating memory
+---------------------
+
+The kernel provides the following general purpose memory allocators:
+kmalloc(), kzalloc(), kmalloc_array(), kcalloc(), vmalloc(), and
+vzalloc().  Please refer to the API documentation for further information
+about them.  :ref:`Documentation/core-api/memory-allocation.rst
+<memory_allocation>`
+
+The preferred form for passing a size of a struct is the following:
+
+.. code-block:: c
+
+	p = kmalloc(sizeof(*p), ...);
+
+The alternative form where struct name is spelled out hurts readability and
+introduces an opportunity for a bug when the pointer variable type is changed
+but the corresponding sizeof that is passed to a memory allocator is not.
+
+Casting the return value which is a void pointer is redundant. The conversion
+from void pointer to any other pointer type is guaranteed by the C programming
+language.
+
+The preferred form for allocating an array is the following:
+
+.. code-block:: c
+
+	p = kmalloc_array(n, sizeof(...), ...);
+
+The preferred form for allocating a zeroed array is the following:
+
+.. code-block:: c
+
+	p = kcalloc(n, sizeof(...), ...);
+
+Both forms check for overflow on the allocation size n * sizeof(...),
+and return NULL if that occurred.
+
+These generic allocation functions all emit a stack dump on failure when used
+without __GFP_NOWARN so there is no use in emitting an additional failure
+message when NULL is returned.
+
+15) The inline disease
+----------------------
+
+There appears to be a common misperception that gcc has a magic "make me
+faster" speedup option called ``inline``. While the use of inlines can be
+appropriate (for example as a means of replacing macros, see Chapter 12), it
+very often is not. Abundant use of the inline keyword leads to a much bigger
+kernel, which in turn slows the system as a whole down, due to a bigger
+icache footprint for the CPU and simply because there is less memory
+available for the pagecache. Just think about it; a pagecache miss causes a
+disk seek, which easily takes 5 milliseconds. There are a LOT of cpu cycles
+that can go into these 5 milliseconds.
+
+A reasonable rule of thumb is to not put inline at functions that have more
+than 3 lines of code in them. An exception to this rule are the cases where
+a parameter is known to be a compiletime constant, and as a result of this
+constantness you *know* the compiler will be able to optimize most of your
+function away at compile time. For a good example of this later case, see
+the kmalloc() inline function.
+
+Often people argue that adding inline to functions that are static and used
+only once is always a win since there is no space tradeoff. While this is
+technically correct, gcc is capable of inlining these automatically without
+help, and the maintenance issue of removing the inline when a second user
+appears outweighs the potential value of the hint that tells gcc to do
+something it would have done anyway.
+
+
+16) Function return values and names
+------------------------------------
+
+Functions can return values of many different kinds, and one of the
+most common is a value indicating whether the function succeeded or
+failed.  Such a value can be represented as an error-code integer
+(-Exxx = failure, 0 = success) or a ``succeeded`` boolean (0 = failure,
+non-zero = success).
+
+Mixing up these two sorts of representations is a fertile source of
+difficult-to-find bugs.  If the C language included a strong distinction
+between integers and booleans then the compiler would find these mistakes
+for us... but it doesn't.  To help prevent such bugs, always follow this
+convention::
+
+	If the name of a function is an action or an imperative command,
+	the function should return an error-code integer.  If the name
+	is a predicate, the function should return a "succeeded" boolean.
+
+For example, ``add work`` is a command, and the add_work() function returns 0
+for success or -EBUSY for failure.  In the same way, ``PCI device present`` is
+a predicate, and the pci_dev_present() function returns 1 if it succeeds in
+finding a matching device or 0 if it doesn't.
+
+All EXPORTed functions must respect this convention, and so should all
+public functions.  Private (static) functions need not, but it is
+recommended that they do.
+
+Functions whose return value is the actual result of a computation, rather
+than an indication of whether the computation succeeded, are not subject to
+this rule.  Generally they indicate failure by returning some out-of-range
+result.  Typical examples would be functions that return pointers; they use
+NULL or the ERR_PTR mechanism to report failure.
+
+
+17) Using bool
+--------------
+
+The Linux kernel bool type is an alias for the C99 _Bool type. bool values can
+only evaluate to 0 or 1, and implicit or explicit conversion to bool
+automatically converts the value to true or false. When using bool types the
+!! construction is not needed, which eliminates a class of bugs.
+
+When working with bool values the true and false definitions should be used
+instead of 1 and 0.
+
+bool function return types and stack variables are always fine to use whenever
+appropriate. Use of bool is encouraged to improve readability and is often a
+better option than 'int' for storing boolean values.
+
+Do not use bool if cache line layout or size of the value matters, as its size
+and alignment varies based on the compiled architecture. Structures that are
+optimized for alignment and size should not use bool.
+
+If a structure has many true/false values, consider consolidating them into a
+bitfield with 1 bit members, or using an appropriate fixed width type, such as
+u8.
+
+Similarly for function arguments, many true/false values can be consolidated
+into a single bitwise 'flags' argument and 'flags' can often be a more
+readable alternative if the call-sites have naked true/false constants.
+
+Otherwise limited use of bool in structures and arguments can improve
+readability.
+
+18) Don't re-invent the kernel macros
+-------------------------------------
+
+The header file include/linux/kernel.h contains a number of macros that
+you should use, rather than explicitly coding some variant of them yourself.
+For example, if you need to calculate the length of an array, take advantage
+of the macro
+
+.. code-block:: c
+
+	#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+Similarly, if you need to calculate the size of some structure member, use
+
+.. code-block:: c
+
+	#define sizeof_field(t, f) (sizeof(((t*)0)->f))
+
+There are also min() and max() macros that do strict type checking if you
+need them.  Feel free to peruse that header file to see what else is already
+defined that you shouldn't reproduce in your code.
+
+
+19) Editor modelines and other cruft
+------------------------------------
+
+Some editors can interpret configuration information embedded in source files,
+indicated with special markers.  For example, emacs interprets lines marked
+like this:
+
+.. code-block:: c
+
+	-*- mode: c -*-
+
+Or like this:
+
+.. code-block:: c
+
+	/*
+	Local Variables:
+	compile-command: "gcc -DMAGIC_DEBUG_FLAG foo.c"
+	End:
+	*/
+
+Vim interprets markers that look like this:
+
+.. code-block:: c
+
+	/* vim:set sw=8 noet */
+
+Do not include any of these in source files.  People have their own personal
+editor configurations, and your source files should not override them.  This
+includes markers for indentation and mode configuration.  People may use their
+own custom mode, or may have some other magic method for making indentation
+work correctly.
+
+
+20) Inline assembly
+-------------------
+
+In architecture-specific code, you may need to use inline assembly to interface
+with CPU or platform functionality.  Don't hesitate to do so when necessary.
+However, don't use inline assembly gratuitously when C can do the job.  You can
+and should poke hardware from C when possible.
+
+Consider writing simple helper functions that wrap common bits of inline
+assembly, rather than repeatedly writing them with slight variations.  Remember
+that inline assembly can use C parameters.
+
+Large, non-trivial assembly functions should go in .S files, with corresponding
+C prototypes defined in C header files.  The C prototypes for assembly
+functions should use ``asmlinkage``.
+
+You may need to mark your asm statement as volatile, to prevent GCC from
+removing it if GCC doesn't notice any side effects.  You don't always need to
+do so, though, and doing so unnecessarily can limit optimization.
+
+When writing a single inline assembly statement containing multiple
+instructions, put each instruction on a separate line in a separate quoted
+string, and end each string except the last with ``\n\t`` to properly indent
+the next instruction in the assembly output:
+
+.. code-block:: c
+
+	asm ("magic %reg1, #42\n\t"
+	     "more_magic %reg2, %reg3"
+	     : /* outputs */ : /* inputs */ : /* clobbers */);
+
+
+21) Conditional Compilation
+---------------------------
+
+Wherever possible, don't use preprocessor conditionals (#if, #ifdef) in .c
+files; doing so makes code harder to read and logic harder to follow.  Instead,
+use such conditionals in a header file defining functions for use in those .c
+files, providing no-op stub versions in the #else case, and then call those
+functions unconditionally from .c files.  The compiler will avoid generating
+any code for the stub calls, producing identical results, but the logic will
+remain easy to follow.
+
+Prefer to compile out entire functions, rather than portions of functions or
+portions of expressions.  Rather than putting an ifdef in an expression, factor
+out part or all of the expression into a separate helper function and apply the
+conditional to that function.
+
+If you have a function or variable which may potentially go unused in a
+particular configuration, and the compiler would warn about its definition
+going unused, mark the definition as __maybe_unused rather than wrapping it in
+a preprocessor conditional.  (However, if a function or variable *always* goes
+unused, delete it.)
+
+Within code, where possible, use the IS_ENABLED macro to convert a Kconfig
+symbol into a C boolean expression, and use it in a normal C conditional:
+
+.. code-block:: c
+
+	if (IS_ENABLED(CONFIG_SOMETHING)) {
+		...
+	}
+
+The compiler will constant-fold the conditional away, and include or exclude
+the block of code just as with an #ifdef, so this will not add any runtime
+overhead.  However, this approach still allows the C compiler to see the code
+inside the block, and check it for correctness (syntax, types, symbol
+references, etc).  Thus, you still have to use an #ifdef if the code inside the
+block references symbols that will not exist if the condition is not met.
+
+At the end of any non-trivial #if or #ifdef block (more than a few lines),
+place a comment after the #endif on the same line, noting the conditional
+expression used.  For instance:
+
+.. code-block:: c
+
+	#ifdef CONFIG_SOMETHING
+	...
+	#endif /* CONFIG_SOMETHING */
+
+
+Appendix I) References
+----------------------
+
+The C Programming Language, Second Edition
+by Brian W. Kernighan and Dennis M. Ritchie.
+Prentice Hall, Inc., 1988.
+ISBN 0-13-110362-8 (paperback), 0-13-110370-9 (hardback).
+
+The Practice of Programming
+by Brian W. Kernighan and Rob Pike.
+Addison-Wesley, Inc., 1999.
+ISBN 0-201-61586-X.
+
+GNU manuals - where in compliance with K&R and this text - for cpp, gcc,
+gcc internals and indent, all available from https://www.gnu.org/manual/
+
+WG14 is the international standardization working group for the programming
+language C, URL: http://www.open-std.org/JTC1/SC22/WG14/
+
+Kernel :ref:`process/coding-style.rst <codingstyle>`, by greg@kroah.com at OLS 2002:
+http://www.kroah.com/linux/talks/ols_2002_kernel_codingstyle_talk/html/
diff --git a/Documentation/process/deprecated.rst b/Documentation/process/deprecated.rst
new file mode 100644
index 000000000..86ea327b7
--- /dev/null
+++ b/Documentation/process/deprecated.rst
@@ -0,0 +1,342 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _deprecated:
+
+=====================================================================
+Deprecated Interfaces, Language Features, Attributes, and Conventions
+=====================================================================
+
+In a perfect world, it would be possible to convert all instances of
+some deprecated API into the new API and entirely remove the old API in
+a single development cycle. However, due to the size of the kernel, the
+maintainership hierarchy, and timing, it's not always feasible to do these
+kinds of conversions at once. This means that new instances may sneak into
+the kernel while old ones are being removed, only making the amount of
+work to remove the API grow. In order to educate developers about what
+has been deprecated and why, this list has been created as a place to
+point when uses of deprecated things are proposed for inclusion in the
+kernel.
+
+__deprecated
+------------
+While this attribute does visually mark an interface as deprecated,
+it `does not produce warnings during builds any more
+<https://git.kernel.org/linus/771c035372a036f83353eef46dbb829780330234>`_
+because one of the standing goals of the kernel is to build without
+warnings and no one was actually doing anything to remove these deprecated
+interfaces. While using `__deprecated` is nice to note an old API in
+a header file, it isn't the full solution. Such interfaces must either
+be fully removed from the kernel, or added to this file to discourage
+others from using them in the future.
+
+BUG() and BUG_ON()
+------------------
+Use WARN() and WARN_ON() instead, and handle the "impossible"
+error condition as gracefully as possible. While the BUG()-family
+of APIs were originally designed to act as an "impossible situation"
+assert and to kill a kernel thread "safely", they turn out to just be
+too risky. (e.g. "In what order do locks need to be released? Have
+various states been restored?") Very commonly, using BUG() will
+destabilize a system or entirely break it, which makes it impossible
+to debug or even get viable crash reports. Linus has `very strong
+<https://lore.kernel.org/lkml/CA+55aFy6jNLsywVYdGp83AMrXBo_P-pkjkphPGrO=82SPKCpLQ@mail.gmail.com/>`_
+feelings `about this
+<https://lore.kernel.org/lkml/CAHk-=whDHsbK3HTOpTF=ue_o04onRwTEaK_ZoJp_fjbqq4+=Jw@mail.gmail.com/>`_.
+
+Note that the WARN()-family should only be used for "expected to
+be unreachable" situations. If you want to warn about "reachable
+but undesirable" situations, please use the pr_warn()-family of
+functions. System owners may have set the *panic_on_warn* sysctl,
+to make sure their systems do not continue running in the face of
+"unreachable" conditions. (For example, see commits like `this one
+<https://git.kernel.org/linus/d4689846881d160a4d12a514e991a740bcb5d65a>`_.)
+
+open-coded arithmetic in allocator arguments
+--------------------------------------------
+Dynamic size calculations (especially multiplication) should not be
+performed in memory allocator (or similar) function arguments due to the
+risk of them overflowing. This could lead to values wrapping around and a
+smaller allocation being made than the caller was expecting. Using those
+allocations could lead to linear overflows of heap memory and other
+misbehaviors. (One exception to this is literal values where the compiler
+can warn if they might overflow. Though using literals for arguments as
+suggested below is also harmless.)
+
+For example, do not use ``count * size`` as an argument, as in::
+
+	foo = kmalloc(count * size, GFP_KERNEL);
+
+Instead, the 2-factor form of the allocator should be used::
+
+	foo = kmalloc_array(count, size, GFP_KERNEL);
+
+Specifically, kmalloc() can be replaced with kmalloc_array(), and
+kzalloc() can be replaced with kcalloc().
+
+If no 2-factor form is available, the saturate-on-overflow helpers should
+be used::
+
+	bar = vmalloc(array_size(count, size));
+
+Another common case to avoid is calculating the size of a structure with
+a trailing array of others structures, as in::
+
+	header = kzalloc(sizeof(*header) + count * sizeof(*header->item),
+			 GFP_KERNEL);
+
+Instead, use the helper::
+
+	header = kzalloc(struct_size(header, item, count), GFP_KERNEL);
+
+.. note:: If you are using struct_size() on a structure containing a zero-length
+        or a one-element array as a trailing array member, please refactor such
+        array usage and switch to a `flexible array member
+        <#zero-length-and-one-element-arrays>`_ instead.
+
+For other calculations, please compose the use of the size_mul(),
+size_add(), and size_sub() helpers. For example, in the case of::
+
+	foo = krealloc(current_size + chunk_size * (count - 3), GFP_KERNEL);
+
+Instead, use the helpers::
+
+	foo = krealloc(size_add(current_size,
+				size_mul(chunk_size,
+					 size_sub(count, 3))), GFP_KERNEL);
+
+For more details, also see array3_size() and flex_array_size(),
+as well as the related check_mul_overflow(), check_add_overflow(),
+check_sub_overflow(), and check_shl_overflow() family of functions.
+
+simple_strtol(), simple_strtoll(), simple_strtoul(), simple_strtoull()
+----------------------------------------------------------------------
+The simple_strtol(), simple_strtoll(),
+simple_strtoul(), and simple_strtoull() functions
+explicitly ignore overflows, which may lead to unexpected results
+in callers. The respective kstrtol(), kstrtoll(),
+kstrtoul(), and kstrtoull() functions tend to be the
+correct replacements, though note that those require the string to be
+NUL or newline terminated.
+
+strcpy()
+--------
+strcpy() performs no bounds checking on the destination buffer. This
+could result in linear overflows beyond the end of the buffer, leading to
+all kinds of misbehaviors. While `CONFIG_FORTIFY_SOURCE=y` and various
+compiler flags help reduce the risk of using this function, there is
+no good reason to add new uses of this function. The safe replacement
+is strscpy(), though care must be given to any cases where the return
+value of strcpy() was used, since strscpy() does not return a pointer to
+the destination, but rather a count of non-NUL bytes copied (or negative
+errno when it truncates).
+
+strncpy() on NUL-terminated strings
+-----------------------------------
+Use of strncpy() does not guarantee that the destination buffer will
+be NUL terminated. This can lead to various linear read overflows and
+other misbehavior due to the missing termination. It also NUL-pads
+the destination buffer if the source contents are shorter than the
+destination buffer size, which may be a needless performance penalty
+for callers using only NUL-terminated strings. The safe replacement is
+strscpy(), though care must be given to any cases where the return value
+of strncpy() was used, since strscpy() does not return a pointer to the
+destination, but rather a count of non-NUL bytes copied (or negative
+errno when it truncates). Any cases still needing NUL-padding should
+instead use strscpy_pad().
+
+If a caller is using non-NUL-terminated strings, strncpy() can
+still be used, but destinations should be marked with the `__nonstring
+<https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html>`_
+attribute to avoid future compiler warnings.
+
+strlcpy()
+---------
+strlcpy() reads the entire source buffer first (since the return value
+is meant to match that of strlen()). This read may exceed the destination
+size limit. This is both inefficient and can lead to linear read overflows
+if a source string is not NUL-terminated. The safe replacement is strscpy(),
+though care must be given to any cases where the return value of strlcpy()
+is used, since strscpy() will return negative errno values when it truncates.
+
+%p format specifier
+-------------------
+Traditionally, using "%p" in format strings would lead to regular address
+exposure flaws in dmesg, proc, sysfs, etc. Instead of leaving these to
+be exploitable, all "%p" uses in the kernel are being printed as a hashed
+value, rendering them unusable for addressing. New uses of "%p" should not
+be added to the kernel. For text addresses, using "%pS" is likely better,
+as it produces the more useful symbol name instead. For nearly everything
+else, just do not add "%p" at all.
+
+Paraphrasing Linus's current `guidance <https://lore.kernel.org/lkml/CA+55aFwQEd_d40g4mUCSsVRZzrFPUJt74vc6PPpb675hYNXcKw@mail.gmail.com/>`_:
+
+- If the hashed "%p" value is pointless, ask yourself whether the pointer
+  itself is important. Maybe it should be removed entirely?
+- If you really think the true pointer value is important, why is some
+  system state or user privilege level considered "special"? If you think
+  you can justify it (in comments and commit log) well enough to stand
+  up to Linus's scrutiny, maybe you can use "%px", along with making sure
+  you have sensible permissions.
+
+And finally, know that a toggle for "%p" hashing will `not be accepted <https://lore.kernel.org/lkml/CA+55aFwieC1-nAs+NFq9RTwaR8ef9hWa4MjNBWL41F-8wM49eA@mail.gmail.com/>`_.
+
+Variable Length Arrays (VLAs)
+-----------------------------
+Using stack VLAs produces much worse machine code than statically
+sized stack arrays. While these non-trivial `performance issues
+<https://git.kernel.org/linus/02361bc77888>`_ are reason enough to
+eliminate VLAs, they are also a security risk. Dynamic growth of a stack
+array may exceed the remaining memory in the stack segment. This could
+lead to a crash, possible overwriting sensitive contents at the end of the
+stack (when built without `CONFIG_THREAD_INFO_IN_TASK=y`), or overwriting
+memory adjacent to the stack (when built without `CONFIG_VMAP_STACK=y`)
+
+Implicit switch case fall-through
+---------------------------------
+The C language allows switch cases to fall through to the next case
+when a "break" statement is missing at the end of a case. This, however,
+introduces ambiguity in the code, as it's not always clear if the missing
+break is intentional or a bug. For example, it's not obvious just from
+looking at the code if `STATE_ONE` is intentionally designed to fall
+through into `STATE_TWO`::
+
+	switch (value) {
+	case STATE_ONE:
+		do_something();
+	case STATE_TWO:
+		do_other();
+		break;
+	default:
+		WARN("unknown state");
+	}
+
+As there have been a long list of flaws `due to missing "break" statements
+<https://cwe.mitre.org/data/definitions/484.html>`_, we no longer allow
+implicit fall-through. In order to identify intentional fall-through
+cases, we have adopted a pseudo-keyword macro "fallthrough" which
+expands to gcc's extension `__attribute__((__fallthrough__))
+<https://gcc.gnu.org/onlinedocs/gcc/Statement-Attributes.html>`_.
+(When the C17/C18  `[[fallthrough]]` syntax is more commonly supported by
+C compilers, static analyzers, and IDEs, we can switch to using that syntax
+for the macro pseudo-keyword.)
+
+All switch/case blocks must end in one of:
+
+* break;
+* fallthrough;
+* continue;
+* goto <label>;
+* return [expression];
+
+Zero-length and one-element arrays
+----------------------------------
+There is a regular need in the kernel to provide a way to declare having
+a dynamically sized set of trailing elements in a structure. Kernel code
+should always use `"flexible array members" <https://en.wikipedia.org/wiki/Flexible_array_member>`_
+for these cases. The older style of one-element or zero-length arrays should
+no longer be used.
+
+In older C code, dynamically sized trailing elements were done by specifying
+a one-element array at the end of a structure::
+
+        struct something {
+                size_t count;
+                struct foo items[1];
+        };
+
+This led to fragile size calculations via sizeof() (which would need to
+remove the size of the single trailing element to get a correct size of
+the "header"). A `GNU C extension <https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html>`_
+was introduced to allow for zero-length arrays, to avoid these kinds of
+size problems::
+
+        struct something {
+                size_t count;
+                struct foo items[0];
+        };
+
+But this led to other problems, and didn't solve some problems shared by
+both styles, like not being able to detect when such an array is accidentally
+being used _not_ at the end of a structure (which could happen directly, or
+when such a struct was in unions, structs of structs, etc).
+
+C99 introduced "flexible array members", which lacks a numeric size for
+the array declaration entirely::
+
+        struct something {
+                size_t count;
+                struct foo items[];
+        };
+
+This is the way the kernel expects dynamically sized trailing elements
+to be declared. It allows the compiler to generate errors when the
+flexible array does not occur last in the structure, which helps to prevent
+some kind of `undefined behavior
+<https://git.kernel.org/linus/76497732932f15e7323dc805e8ea8dc11bb587cf>`_
+bugs from being inadvertently introduced to the codebase. It also allows
+the compiler to correctly analyze array sizes (via sizeof(),
+`CONFIG_FORTIFY_SOURCE`, and `CONFIG_UBSAN_BOUNDS`). For instance,
+there is no mechanism that warns us that the following application of the
+sizeof() operator to a zero-length array always results in zero::
+
+        struct something {
+                size_t count;
+                struct foo items[0];
+        };
+
+        struct something *instance;
+
+        instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
+        instance->count = count;
+
+        size = sizeof(instance->items) * instance->count;
+        memcpy(instance->items, source, size);
+
+At the last line of code above, ``size`` turns out to be ``zero``, when one might
+have thought it represents the total size in bytes of the dynamic memory recently
+allocated for the trailing array ``items``. Here are a couple examples of this
+issue: `link 1
+<https://git.kernel.org/linus/f2cd32a443da694ac4e28fbf4ac6f9d5cc63a539>`_,
+`link 2
+<https://git.kernel.org/linus/ab91c2a89f86be2898cee208d492816ec238b2cf>`_.
+Instead, `flexible array members have incomplete type, and so the sizeof()
+operator may not be applied <https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html>`_,
+so any misuse of such operators will be immediately noticed at build time.
+
+With respect to one-element arrays, one has to be acutely aware that `such arrays
+occupy at least as much space as a single object of the type
+<https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html>`_,
+hence they contribute to the size of the enclosing structure. This is prone
+to error every time people want to calculate the total size of dynamic memory
+to allocate for a structure containing an array of this kind as a member::
+
+        struct something {
+                size_t count;
+                struct foo items[1];
+        };
+
+        struct something *instance;
+
+        instance = kmalloc(struct_size(instance, items, count - 1), GFP_KERNEL);
+        instance->count = count;
+
+        size = sizeof(instance->items) * instance->count;
+        memcpy(instance->items, source, size);
+
+In the example above, we had to remember to calculate ``count - 1`` when using
+the struct_size() helper, otherwise we would have --unintentionally-- allocated
+memory for one too many ``items`` objects. The cleanest and least error-prone way
+to implement this is through the use of a `flexible array member`, together with
+struct_size() and flex_array_size() helpers::
+
+        struct something {
+                size_t count;
+                struct foo items[];
+        };
+
+        struct something *instance;
+
+        instance = kmalloc(struct_size(instance, items, count), GFP_KERNEL);
+        instance->count = count;
+
+        memcpy(instance->items, source, flex_array_size(instance, items, instance->count));
diff --git a/Documentation/process/development-process.rst b/Documentation/process/development-process.rst
new file mode 100644
index 000000000..61c627e41
--- /dev/null
+++ b/Documentation/process/development-process.rst
@@ -0,0 +1,28 @@
+.. _development_process_main:
+
+A guide to the Kernel Development Process
+=========================================
+
+Contents:
+
+.. toctree::
+   :numbered:
+   :maxdepth: 2
+
+   1.Intro
+   2.Process
+   3.Early-stage
+   4.Coding
+   5.Posting
+   6.Followthrough
+   7.AdvancedTopics
+   8.Conclusion
+
+The purpose of this document is to help developers (and their managers)
+work with the development community with a minimum of frustration.  It is
+an attempt to document how this community works in a way which is
+accessible to those who are not intimately familiar with Linux kernel
+development (or, indeed, free software development in general).  While
+there is some technical material here, this is very much a process-oriented
+discussion which does not require a deep knowledge of kernel programming to
+understand.
diff --git a/Documentation/process/email-clients.rst b/Documentation/process/email-clients.rst
new file mode 100644
index 000000000..16586f6cc
--- /dev/null
+++ b/Documentation/process/email-clients.rst
@@ -0,0 +1,327 @@
+.. _email_clients:
+
+Email clients info for Linux
+============================
+
+Git
+---
+
+These days most developers use ``git send-email`` instead of regular
+email clients.  The man page for this is quite good.  On the receiving
+end, maintainers use ``git am`` to apply the patches.
+
+If you are new to ``git`` then send your first patch to yourself.  Save it
+as raw text including all the headers.  Run ``git am raw_email.txt`` and
+then review the changelog with ``git log``.  When that works then send
+the patch to the appropriate mailing list(s).
+
+General Preferences
+-------------------
+
+Patches for the Linux kernel are submitted via email, preferably as
+inline text in the body of the email.  Some maintainers accept
+attachments, but then the attachments should have content-type
+``text/plain``.  However, attachments are generally frowned upon because
+it makes quoting portions of the patch more difficult in the patch
+review process.
+
+It's also strongly recommended that you use plain text in your email body,
+for patches and other emails alike. https://useplaintext.email may be useful
+for information on how to configure your preferred email client, as well as
+listing recommended email clients should you not already have a preference.
+
+Email clients that are used for Linux kernel patches should send the
+patch text untouched.  For example, they should not modify or delete tabs
+or spaces, even at the beginning or end of lines.
+
+Don't send patches with ``format=flowed``.  This can cause unexpected
+and unwanted line breaks.
+
+Don't let your email client do automatic word wrapping for you.
+This can also corrupt your patch.
+
+Email clients should not modify the character set encoding of the text.
+Emailed patches should be in ASCII or UTF-8 encoding only.
+If you configure your email client to send emails with UTF-8 encoding,
+you avoid some possible charset problems.
+
+Email clients should generate and maintain "References:" or "In-Reply-To:"
+headers so that mail threading is not broken.
+
+Copy-and-paste (or cut-and-paste) usually does not work for patches
+because tabs are converted to spaces.  Using xclipboard, xclip, and/or
+xcutsel may work, but it's best to test this for yourself or just avoid
+copy-and-paste.
+
+Don't use PGP/GPG signatures in mail that contains patches.
+This breaks many scripts that read and apply the patches.
+(This should be fixable.)
+
+It's a good idea to send a patch to yourself, save the received message,
+and successfully apply it with 'patch' before sending patches to Linux
+mailing lists.
+
+
+Some email client (MUA) hints
+-----------------------------
+
+Here are some specific MUA configuration hints for editing and sending
+patches for the Linux kernel.  These are not meant to be complete
+software package configuration summaries.
+
+
+Legend:
+
+- TUI = text-based user interface
+- GUI = graphical user interface
+
+Alpine (TUI)
+************
+
+Config options:
+
+In the :menuselection:`Sending Preferences` section:
+
+- :menuselection:`Do Not Send Flowed Text` must be ``enabled``
+- :menuselection:`Strip Whitespace Before Sending` must be ``disabled``
+
+When composing the message, the cursor should be placed where the patch
+should appear, and then pressing :kbd:`CTRL-R` let you specify the patch file
+to insert into the message.
+
+Claws Mail (GUI)
+****************
+
+Works. Some people use this successfully for patches.
+
+To insert a patch use :menuselection:`Message-->Insert File` (:kbd:`CTRL-I`)
+or an external editor.
+
+If the inserted patch has to be edited in the Claws composition window
+"Auto wrapping" in
+:menuselection:`Configuration-->Preferences-->Compose-->Wrapping` should be
+disabled.
+
+Evolution (GUI)
+***************
+
+Some people use this successfully for patches.
+
+When composing mail select: Preformat
+  from :menuselection:`Format-->Paragraph Style-->Preformatted` (:kbd:`CTRL-7`)
+  or the toolbar
+
+Then use:
+:menuselection:`Insert-->Text File...` (:kbd:`ALT-N x`)
+to insert the patch.
+
+You can also ``diff -Nru old.c new.c | xclip``, select
+:menuselection:`Preformat`, then paste with the middle button.
+
+Kmail (GUI)
+***********
+
+Some people use Kmail successfully for patches.
+
+The default setting of not composing in HTML is appropriate; do not
+enable it.
+
+When composing an email, under options, uncheck "word wrap". The only
+disadvantage is any text you type in the email will not be word-wrapped
+so you will have to manually word wrap text before the patch. The easiest
+way around this is to compose your email with word wrap enabled, then save
+it as a draft. Once you pull it up again from your drafts it is now hard
+word-wrapped and you can uncheck "word wrap" without losing the existing
+wrapping.
+
+At the bottom of your email, put the commonly-used patch delimiter before
+inserting your patch:  three hyphens (``---``).
+
+Then from the :menuselection:`Message` menu item, select
+:menuselection:`insert file` and choose your patch.
+As an added bonus you can customise the message creation toolbar menu
+and put the :menuselection:`insert file` icon there.
+
+Make the composer window wide enough so that no lines wrap. As of
+KMail 1.13.5 (KDE 4.5.4), KMail will apply word wrapping when sending
+the email if the lines wrap in the composer window. Having word wrapping
+disabled in the Options menu isn't enough. Thus, if your patch has very
+long lines, you must make the composer window very wide before sending
+the email. See: https://bugs.kde.org/show_bug.cgi?id=174034
+
+You can safely GPG sign attachments, but inlined text is preferred for
+patches so do not GPG sign them.  Signing patches that have been inserted
+as inlined text will make them tricky to extract from their 7-bit encoding.
+
+If you absolutely must send patches as attachments instead of inlining
+them as text, right click on the attachment and select :menuselection:`properties`,
+and highlight :menuselection:`Suggest automatic display` to make the attachment
+inlined to make it more viewable.
+
+When saving patches that are sent as inlined text, select the email that
+contains the patch from the message list pane, right click and select
+:menuselection:`save as`.  You can use the whole email unmodified as a patch
+if it was properly composed.  Emails are saved as read-write for user only so
+you will have to chmod them to make them group and world readable if you copy
+them elsewhere.
+
+Lotus Notes (GUI)
+*****************
+
+Run away from it.
+
+IBM Verse (Web GUI)
+*******************
+
+See Lotus Notes.
+
+Mutt (TUI)
+**********
+
+Plenty of Linux developers use ``mutt``, so it must work pretty well.
+
+Mutt doesn't come with an editor, so whatever editor you use should be
+used in a way that there are no automatic linebreaks.  Most editors have
+an :menuselection:`insert file` option that inserts the contents of a file
+unaltered.
+
+To use ``vim`` with mutt::
+
+  set editor="vi"
+
+If using xclip, type the command::
+
+  :set paste
+
+before middle button or shift-insert or use::
+
+  :r filename
+
+if you want to include the patch inline.
+(a)ttach works fine without ``set paste``.
+
+You can also generate patches with ``git format-patch`` and then use Mutt
+to send them::
+
+    $ mutt -H 0001-some-bug-fix.patch
+
+Config options:
+
+It should work with default settings.
+However, it's a good idea to set the ``send_charset`` to::
+
+  set send_charset="us-ascii:utf-8"
+
+Mutt is highly customizable. Here is a minimum configuration to start
+using Mutt to send patches through Gmail::
+
+  # .muttrc
+  # ================  IMAP ====================
+  set imap_user = 'yourusername@gmail.com'
+  set imap_pass = 'yourpassword'
+  set spoolfile = imaps://imap.gmail.com/INBOX
+  set folder = imaps://imap.gmail.com/
+  set record="imaps://imap.gmail.com/[Gmail]/Sent Mail"
+  set postponed="imaps://imap.gmail.com/[Gmail]/Drafts"
+  set mbox="imaps://imap.gmail.com/[Gmail]/All Mail"
+
+  # ================  SMTP  ====================
+  set smtp_url = "smtp://username@smtp.gmail.com:587/"
+  set smtp_pass = $imap_pass
+  set ssl_force_tls = yes # Require encrypted connection
+
+  # ================  Composition  ====================
+  set editor = `echo \$EDITOR`
+  set edit_headers = yes  # See the headers when editing
+  set charset = UTF-8     # value of $LANG; also fallback for send_charset
+  # Sender, email address, and sign-off line must match
+  unset use_domain        # because joe@localhost is just embarrassing
+  set realname = "YOUR NAME"
+  set from = "username@gmail.com"
+  set use_from = yes
+
+The Mutt docs have lots more information:
+
+    https://gitlab.com/muttmua/mutt/-/wikis/UseCases/Gmail
+
+    http://www.mutt.org/doc/manual/
+
+Pine (TUI)
+**********
+
+Pine has had some whitespace truncation issues in the past, but these
+should all be fixed now.
+
+Use alpine (pine's successor) if you can.
+
+Config options:
+
+- ``quell-flowed-text`` is needed for recent versions
+- the ``no-strip-whitespace-before-send`` option is needed
+
+
+Sylpheed (GUI)
+**************
+
+- Works well for inlining text (or using attachments).
+- Allows use of an external editor.
+- Is slow on large folders.
+- Won't do TLS SMTP auth over a non-SSL connection.
+- Has a helpful ruler bar in the compose window.
+- Adding addresses to address book doesn't understand the display name
+  properly.
+
+Thunderbird (GUI)
+*****************
+
+Thunderbird is an Outlook clone that likes to mangle text, but there are ways
+to coerce it into behaving.
+
+- Allow use of an external editor:
+  The easiest thing to do with Thunderbird and patches is to use an
+  "external editor" extension and then just use your favorite ``$EDITOR``
+  for reading/merging patches into the body text.  To do this, download
+  and install the extension, then add a button for it using
+  :menuselection:`View-->Toolbars-->Customize...` and finally just click on it
+  when in the :menuselection:`Compose` dialog.
+
+  Please note that "external editor" requires that your editor must not
+  fork, or in other words, the editor must not return before closing.
+  You may have to pass additional flags or change the settings of your
+  editor. Most notably if you are using gvim then you must pass the -f
+  option to gvim by putting ``/usr/bin/gvim -f`` (if the binary is in
+  ``/usr/bin``) to the text editor field in :menuselection:`external editor`
+  settings. If you are using some other editor then please read its manual
+  to find out how to do this.
+
+To beat some sense out of the internal editor, do this:
+
+- Edit your Thunderbird config settings so that it won't use ``format=flowed``.
+  Go to :menuselection:`edit-->preferences-->advanced-->config editor` to bring up
+  the thunderbird's registry editor.
+
+- Set ``mailnews.send_plaintext_flowed`` to ``false``
+
+- Set ``mailnews.wraplength`` from ``72`` to ``0``
+
+- :menuselection:`View-->Message Body As-->Plain Text`
+
+- :menuselection:`View-->Character Encoding-->Unicode (UTF-8)`
+
+TkRat (GUI)
+***********
+
+Works.  Use "Insert file..." or external editor.
+
+Gmail (Web GUI)
+***************
+
+Does not work for sending patches.
+
+Gmail web client converts tabs to spaces automatically.
+
+At the same time it wraps lines every 78 chars with CRLF style line breaks
+although tab2space problem can be solved with external editor.
+
+Another problem is that Gmail will base64-encode any message that has a
+non-ASCII character. That includes things like European names.
diff --git a/Documentation/process/embargoed-hardware-issues.rst b/Documentation/process/embargoed-hardware-issues.rst
new file mode 100644
index 000000000..43cdc67e4
--- /dev/null
+++ b/Documentation/process/embargoed-hardware-issues.rst
@@ -0,0 +1,311 @@
+.. _embargoed_hardware_issues:
+
+Embargoed hardware issues
+=========================
+
+Scope
+-----
+
+Hardware issues which result in security problems are a different category
+of security bugs than pure software bugs which only affect the Linux
+kernel.
+
+Hardware issues like Meltdown, Spectre, L1TF etc. must be treated
+differently because they usually affect all Operating Systems ("OS") and
+therefore need coordination across different OS vendors, distributions,
+hardware vendors and other parties. For some of the issues, software
+mitigations can depend on microcode or firmware updates, which need further
+coordination.
+
+.. _Contact:
+
+Contact
+-------
+
+The Linux kernel hardware security team is separate from the regular Linux
+kernel security team.
+
+The team only handles the coordination of embargoed hardware security
+issues.  Reports of pure software security bugs in the Linux kernel are not
+handled by this team and the reporter will be guided to contact the regular
+Linux kernel security team (:ref:`Documentation/admin-guide/
+<securitybugs>`) instead.
+
+The team can be contacted by email at <hardware-security@kernel.org>. This
+is a private list of security officers who will help you to coordinate an
+issue according to our documented process.
+
+The list is encrypted and email to the list can be sent by either PGP or
+S/MIME encrypted and must be signed with the reporter's PGP key or S/MIME
+certificate. The list's PGP key and S/MIME certificate are available from
+the following URLs:
+
+  - PGP: https://www.kernel.org/static/files/hardware-security.asc
+  - S/MIME: https://www.kernel.org/static/files/hardware-security.crt
+
+While hardware security issues are often handled by the affected hardware
+vendor, we welcome contact from researchers or individuals who have
+identified a potential hardware flaw.
+
+Hardware security officers
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The current team of hardware security officers:
+
+  - Linus Torvalds (Linux Foundation Fellow)
+  - Greg Kroah-Hartman (Linux Foundation Fellow)
+  - Thomas Gleixner (Linux Foundation Fellow)
+
+Operation of mailing-lists
+^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The encrypted mailing-lists which are used in our process are hosted on
+Linux Foundation's IT infrastructure. By providing this service, members
+of Linux Foundation's IT operations personnel technically have the
+ability to access the embargoed information, but are obliged to
+confidentiality by their employment contract. Linux Foundation IT
+personnel are also responsible for operating and managing the rest of
+kernel.org infrastructure.
+
+The Linux Foundation's current director of IT Project infrastructure is
+Konstantin Ryabitsev.
+
+
+Non-disclosure agreements
+-------------------------
+
+The Linux kernel hardware security team is not a formal body and therefore
+unable to enter into any non-disclosure agreements.  The kernel community
+is aware of the sensitive nature of such issues and offers a Memorandum of
+Understanding instead.
+
+
+Memorandum of Understanding
+---------------------------
+
+The Linux kernel community has a deep understanding of the requirement to
+keep hardware security issues under embargo for coordination between
+different OS vendors, distributors, hardware vendors and other parties.
+
+The Linux kernel community has successfully handled hardware security
+issues in the past and has the necessary mechanisms in place to allow
+community compliant development under embargo restrictions.
+
+The Linux kernel community has a dedicated hardware security team for
+initial contact, which oversees the process of handling such issues under
+embargo rules.
+
+The hardware security team identifies the developers (domain experts) who
+will form the initial response team for a particular issue. The initial
+response team can bring in further developers (domain experts) to address
+the issue in the best technical way.
+
+All involved developers pledge to adhere to the embargo rules and to keep
+the received information confidential. Violation of the pledge will lead to
+immediate exclusion from the current issue and removal from all related
+mailing-lists. In addition, the hardware security team will also exclude
+the offender from future issues. The impact of this consequence is a highly
+effective deterrent in our community. In case a violation happens the
+hardware security team will inform the involved parties immediately. If you
+or anyone becomes aware of a potential violation, please report it
+immediately to the Hardware security officers.
+
+
+Process
+^^^^^^^
+
+Due to the globally distributed nature of Linux kernel development,
+face-to-face meetings are almost impossible to address hardware security
+issues.  Phone conferences are hard to coordinate due to time zones and
+other factors and should be only used when absolutely necessary. Encrypted
+email has been proven to be the most effective and secure communication
+method for these types of issues.
+
+Start of Disclosure
+"""""""""""""""""""
+
+Disclosure starts by contacting the Linux kernel hardware security team by
+email. This initial contact should contain a description of the problem and
+a list of any known affected hardware. If your organization builds or
+distributes the affected hardware, we encourage you to also consider what
+other hardware could be affected.
+
+The hardware security team will provide an incident-specific encrypted
+mailing-list which will be used for initial discussion with the reporter,
+further disclosure and coordination.
+
+The hardware security team will provide the disclosing party a list of
+developers (domain experts) who should be informed initially about the
+issue after confirming with the developers  that they will adhere to this
+Memorandum of Understanding and the documented process. These developers
+form the initial response team and will be responsible for handling the
+issue after initial contact. The hardware security team is supporting the
+response team, but is not necessarily involved in the mitigation
+development process.
+
+While individual developers might be covered by a non-disclosure agreement
+via their employer, they cannot enter individual non-disclosure agreements
+in their role as Linux kernel developers. They will, however, agree to
+adhere to this documented process and the Memorandum of Understanding.
+
+The disclosing party should provide a list of contacts for all other
+entities who have already been, or should be, informed about the issue.
+This serves several purposes:
+
+ - The list of disclosed entities allows communication accross the
+   industry, e.g. other OS vendors, HW vendors, etc.
+
+ - The disclosed entities can be contacted to name experts who should
+   participate in the mitigation development.
+
+ - If an expert which is required to handle an issue is employed by an
+   listed entity or member of an listed entity, then the response teams can
+   request the disclosure of that expert from that entity. This ensures
+   that the expert is also part of the entity's response team.
+
+Disclosure
+""""""""""
+
+The disclosing party provides detailed information to the initial response
+team via the specific encrypted mailing-list.
+
+From our experience the technical documentation of these issues is usually
+a sufficient starting point and further technical clarification is best
+done via email.
+
+Mitigation development
+""""""""""""""""""""""
+
+The initial response team sets up an encrypted mailing-list or repurposes
+an existing one if appropriate.
+
+Using a mailing-list is close to the normal Linux development process and
+has been successfully used in developing mitigations for various hardware
+security issues in the past.
+
+The mailing-list operates in the same way as normal Linux development.
+Patches are posted, discussed and reviewed and if agreed on applied to a
+non-public git repository which is only accessible to the participating
+developers via a secure connection. The repository contains the main
+development branch against the mainline kernel and backport branches for
+stable kernel versions as necessary.
+
+The initial response team will identify further experts from the Linux
+kernel developer community as needed. Bringing in experts can happen at any
+time of the development process and needs to be handled in a timely manner.
+
+If an expert is employed by or member of an entity on the disclosure list
+provided by the disclosing party, then participation will be requested from
+the relevant entity.
+
+If not, then the disclosing party will be informed about the experts
+participation. The experts are covered by the Memorandum of Understanding
+and the disclosing party is requested to acknowledge the participation. In
+case that the disclosing party has a compelling reason to object, then this
+objection has to be raised within five work days and resolved with the
+incident team immediately. If the disclosing party does not react within
+five work days this is taken as silent acknowledgement.
+
+After acknowledgement or resolution of an objection the expert is disclosed
+by the incident team and brought into the development process.
+
+
+Coordinated release
+"""""""""""""""""""
+
+The involved parties will negotiate the date and time where the embargo
+ends. At that point the prepared mitigations are integrated into the
+relevant kernel trees and published.
+
+While we understand that hardware security issues need coordinated embargo
+time, the embargo time should be constrained to the minimum time which is
+required for all involved parties to develop, test and prepare the
+mitigations. Extending embargo time artificially to meet conference talk
+dates or other non-technical reasons is creating more work and burden for
+the involved developers and response teams as the patches need to be kept
+up to date in order to follow the ongoing upstream kernel development,
+which might create conflicting changes.
+
+CVE assignment
+""""""""""""""
+
+Neither the hardware security team nor the initial response team assign
+CVEs, nor are CVEs required for the development process. If CVEs are
+provided by the disclosing party they can be used for documentation
+purposes.
+
+Process ambassadors
+-------------------
+
+For assistance with this process we have established ambassadors in various
+organizations, who can answer questions about or provide guidance on the
+reporting process and further handling. Ambassadors are not involved in the
+disclosure of a particular issue, unless requested by a response team or by
+an involved disclosed party. The current ambassadors list:
+
+  ============= ========================================================
+  ARM           Grant Likely <grant.likely@arm.com>
+  AMD		Tom Lendacky <tom.lendacky@amd.com>
+  IBM Z         Christian Borntraeger <borntraeger@de.ibm.com>
+  IBM Power     Anton Blanchard <anton@linux.ibm.com>
+  Intel		Tony Luck <tony.luck@intel.com>
+  Qualcomm	Trilok Soni <tsoni@codeaurora.org>
+
+  Microsoft	James Morris <jamorris@linux.microsoft.com>
+  VMware
+  Xen		Andrew Cooper <andrew.cooper3@citrix.com>
+
+  Canonical	John Johansen <john.johansen@canonical.com>
+  Debian	Ben Hutchings <ben@decadent.org.uk>
+  Oracle	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+  Red Hat	Josh Poimboeuf <jpoimboe@redhat.com>
+  SUSE		Jiri Kosina <jkosina@suse.cz>
+
+  Amazon
+  Google	Kees Cook <keescook@chromium.org>
+  ============= ========================================================
+
+If you want your organization to be added to the ambassadors list, please
+contact the hardware security team. The nominated ambassador has to
+understand and support our process fully and is ideally well connected in
+the Linux kernel community.
+
+Encrypted mailing-lists
+-----------------------
+
+We use encrypted mailing-lists for communication. The operating principle
+of these lists is that email sent to the list is encrypted either with the
+list's PGP key or with the list's S/MIME certificate. The mailing-list
+software decrypts the email and re-encrypts it individually for each
+subscriber with the subscriber's PGP key or S/MIME certificate. Details
+about the mailing-list software and the setup which is used to ensure the
+security of the lists and protection of the data can be found here:
+https://korg.wiki.kernel.org/userdoc/remail.
+
+List keys
+^^^^^^^^^
+
+For initial contact see :ref:`Contact`. For incident specific mailing-lists
+the key and S/MIME certificate are conveyed to the subscribers by email
+sent from the specific list.
+
+Subscription to incident specific lists
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Subscription is handled by the response teams. Disclosed parties who want
+to participate in the communication send a list of potential subscribers to
+the response team so the response team can validate subscription requests.
+
+Each subscriber needs to send a subscription request to the response team
+by email. The email must be signed with the subscriber's PGP key or S/MIME
+certificate. If a PGP key is used, it must be available from a public key
+server and is ideally connected to the Linux kernel's PGP web of trust. See
+also: https://www.kernel.org/signature.html.
+
+The response team verifies that the subscriber request is valid and adds
+the subscriber to the list. After subscription the subscriber will receive
+email from the mailing-list which is signed either with the list's PGP key
+or the list's S/MIME certificate. The subscriber's email client can extract
+the PGP key or the S/MIME certificate from the signature so the subscriber
+can send encrypted email to the list.
+
diff --git a/Documentation/process/howto.rst b/Documentation/process/howto.rst
new file mode 100644
index 000000000..20c9e07e0
--- /dev/null
+++ b/Documentation/process/howto.rst
@@ -0,0 +1,627 @@
+.. _process_howto:
+
+HOWTO do Linux kernel development
+=================================
+
+This is the be-all, end-all document on this topic.  It contains
+instructions on how to become a Linux kernel developer and how to learn
+to work with the Linux kernel development community.  It tries to not
+contain anything related to the technical aspects of kernel programming,
+but will help point you in the right direction for that.
+
+If anything in this document becomes out of date, please send in patches
+to the maintainer of this file, who is listed at the bottom of the
+document.
+
+
+Introduction
+------------
+
+So, you want to learn how to become a Linux kernel developer?  Or you
+have been told by your manager, "Go write a Linux driver for this
+device."  This document's goal is to teach you everything you need to
+know to achieve this by describing the process you need to go through,
+and hints on how to work with the community.  It will also try to
+explain some of the reasons why the community works like it does.
+
+The kernel is written mostly in C, with some architecture-dependent
+parts written in assembly. A good understanding of C is required for
+kernel development.  Assembly (any architecture) is not required unless
+you plan to do low-level development for that architecture.  Though they
+are not a good substitute for a solid C education and/or years of
+experience, the following books are good for, if anything, reference:
+
+ - "The C Programming Language" by Kernighan and Ritchie [Prentice Hall]
+ - "Practical C Programming" by Steve Oualline [O'Reilly]
+ - "C:  A Reference Manual" by Harbison and Steele [Prentice Hall]
+
+The kernel is written using GNU C and the GNU toolchain.  While it
+adheres to the ISO C89 standard, it uses a number of extensions that are
+not featured in the standard.  The kernel is a freestanding C
+environment, with no reliance on the standard C library, so some
+portions of the C standard are not supported.  Arbitrary long long
+divisions and floating point are not allowed.  It can sometimes be
+difficult to understand the assumptions the kernel has on the toolchain
+and the extensions that it uses, and unfortunately there is no
+definitive reference for them.  Please check the gcc info pages (`info
+gcc`) for some information on them.
+
+Please remember that you are trying to learn how to work with the
+existing development community.  It is a diverse group of people, with
+high standards for coding, style and procedure.  These standards have
+been created over time based on what they have found to work best for
+such a large and geographically dispersed team.  Try to learn as much as
+possible about these standards ahead of time, as they are well
+documented; do not expect people to adapt to you or your company's way
+of doing things.
+
+
+Legal Issues
+------------
+
+The Linux kernel source code is released under the GPL.  Please see the file
+COPYING in the main directory of the source tree. The Linux kernel licensing
+rules and how to use `SPDX <https://spdx.org/>`_ identifiers in source code are
+described in :ref:`Documentation/process/license-rules.rst <kernel_licensing>`.
+If you have further questions about the license, please contact a lawyer, and do
+not ask on the Linux kernel mailing list.  The people on the mailing lists are
+not lawyers, and you should not rely on their statements on legal matters.
+
+For common questions and answers about the GPL, please see:
+
+	https://www.gnu.org/licenses/gpl-faq.html
+
+
+Documentation
+-------------
+
+The Linux kernel source tree has a large range of documents that are
+invaluable for learning how to interact with the kernel community.  When
+new features are added to the kernel, it is recommended that new
+documentation files are also added which explain how to use the feature.
+When a kernel change causes the interface that the kernel exposes to
+userspace to change, it is recommended that you send the information or
+a patch to the manual pages explaining the change to the manual pages
+maintainer at mtk.manpages@gmail.com, and CC the list
+linux-api@vger.kernel.org.
+
+Here is a list of files that are in the kernel source tree that are
+required reading:
+
+  :ref:`Documentation/admin-guide/README.rst <readme>`
+    This file gives a short background on the Linux kernel and describes
+    what is necessary to do to configure and build the kernel.  People
+    who are new to the kernel should start here.
+
+  :ref:`Documentation/process/changes.rst <changes>`
+    This file gives a list of the minimum levels of various software
+    packages that are necessary to build and run the kernel
+    successfully.
+
+  :ref:`Documentation/process/coding-style.rst <codingstyle>`
+    This describes the Linux kernel coding style, and some of the
+    rationale behind it. All new code is expected to follow the
+    guidelines in this document. Most maintainers will only accept
+    patches if these rules are followed, and many people will only
+    review code if it is in the proper style.
+
+  :ref:`Documentation/process/submitting-patches.rst <submittingpatches>` and :ref:`Documentation/process/submitting-drivers.rst <submittingdrivers>`
+    These files describe in explicit detail how to successfully create
+    and send a patch, including (but not limited to):
+
+       - Email contents
+       - Email format
+       - Who to send it to
+
+    Following these rules will not guarantee success (as all patches are
+    subject to scrutiny for content and style), but not following them
+    will almost always prevent it.
+
+    Other excellent descriptions of how to create patches properly are:
+
+	"The Perfect Patch"
+		https://www.ozlabs.org/~akpm/stuff/tpp.txt
+
+	"Linux kernel patch submission format"
+		https://web.archive.org/web/20180829112450/http://linux.yyz.us/patch-format.html
+
+  :ref:`Documentation/process/stable-api-nonsense.rst <stable_api_nonsense>`
+    This file describes the rationale behind the conscious decision to
+    not have a stable API within the kernel, including things like:
+
+      - Subsystem shim-layers (for compatibility?)
+      - Driver portability between Operating Systems.
+      - Mitigating rapid change within the kernel source tree (or
+	preventing rapid change)
+
+    This document is crucial for understanding the Linux development
+    philosophy and is very important for people moving to Linux from
+    development on other Operating Systems.
+
+  :ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>`
+    If you feel you have found a security problem in the Linux kernel,
+    please follow the steps in this document to help notify the kernel
+    developers, and help solve the issue.
+
+  :ref:`Documentation/process/management-style.rst <managementstyle>`
+    This document describes how Linux kernel maintainers operate and the
+    shared ethos behind their methodologies.  This is important reading
+    for anyone new to kernel development (or anyone simply curious about
+    it), as it resolves a lot of common misconceptions and confusion
+    about the unique behavior of kernel maintainers.
+
+  :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
+    This file describes the rules on how the stable kernel releases
+    happen, and what to do if you want to get a change into one of these
+    releases.
+
+  :ref:`Documentation/process/kernel-docs.rst <kernel_docs>`
+    A list of external documentation that pertains to kernel
+    development.  Please consult this list if you do not find what you
+    are looking for within the in-kernel documentation.
+
+  :ref:`Documentation/process/applying-patches.rst <applying_patches>`
+    A good introduction describing exactly what a patch is and how to
+    apply it to the different development branches of the kernel.
+
+The kernel also has a large number of documents that can be
+automatically generated from the source code itself or from
+ReStructuredText markups (ReST), like this one. This includes a
+full description of the in-kernel API, and rules on how to handle
+locking properly.
+
+All such documents can be generated as PDF or HTML by running::
+
+	make pdfdocs
+	make htmldocs
+
+respectively from the main kernel source directory.
+
+The documents that uses ReST markup will be generated at Documentation/output.
+They can also be generated on LaTeX and ePub formats with::
+
+	make latexdocs
+	make epubdocs
+
+Becoming A Kernel Developer
+---------------------------
+
+If you do not know anything about Linux kernel development, you should
+look at the Linux KernelNewbies project:
+
+	https://kernelnewbies.org
+
+It consists of a helpful mailing list where you can ask almost any type
+of basic kernel development question (make sure to search the archives
+first, before asking something that has already been answered in the
+past.)  It also has an IRC channel that you can use to ask questions in
+real-time, and a lot of helpful documentation that is useful for
+learning about Linux kernel development.
+
+The website has basic information about code organization, subsystems,
+and current projects (both in-tree and out-of-tree). It also describes
+some basic logistical information, like how to compile a kernel and
+apply a patch.
+
+If you do not know where you want to start, but you want to look for
+some task to start doing to join into the kernel development community,
+go to the Linux Kernel Janitor's project:
+
+	https://kernelnewbies.org/KernelJanitors
+
+It is a great place to start.  It describes a list of relatively simple
+problems that need to be cleaned up and fixed within the Linux kernel
+source tree.  Working with the developers in charge of this project, you
+will learn the basics of getting your patch into the Linux kernel tree,
+and possibly be pointed in the direction of what to go work on next, if
+you do not already have an idea.
+
+Before making any actual modifications to the Linux kernel code, it is
+imperative to understand how the code in question works.  For this
+purpose, nothing is better than reading through it directly (most tricky
+bits are commented well), perhaps even with the help of specialized
+tools.  One such tool that is particularly recommended is the Linux
+Cross-Reference project, which is able to present source code in a
+self-referential, indexed webpage format. An excellent up-to-date
+repository of the kernel code may be found at:
+
+	https://elixir.bootlin.com/
+
+
+The development process
+-----------------------
+
+Linux kernel development process currently consists of a few different
+main kernel "branches" and lots of different subsystem-specific kernel
+branches.  These different branches are:
+
+  - Linus's mainline tree
+  - Various stable trees with multiple major numbers
+  - Subsystem-specific trees
+  - linux-next integration testing tree
+
+Mainline tree
+~~~~~~~~~~~~~
+
+The mainline tree is maintained by Linus Torvalds, and can be found at
+https://kernel.org or in the repo.  Its development process is as follows:
+
+  - As soon as a new kernel is released a two week window is open,
+    during this period of time maintainers can submit big diffs to
+    Linus, usually the patches that have already been included in the
+    linux-next for a few weeks.  The preferred way to submit big changes
+    is using git (the kernel's source management tool, more information
+    can be found at https://git-scm.com/) but plain patches are also just
+    fine.
+  - After two weeks a -rc1 kernel is released and the focus is on making the
+    new kernel as rock solid as possible.  Most of the patches at this point
+    should fix a regression.  Bugs that have always existed are not
+    regressions, so only push these kinds of fixes if they are important.
+    Please note that a whole new driver (or filesystem) might be accepted
+    after -rc1 because there is no risk of causing regressions with such a
+    change as long as the change is self-contained and does not affect areas
+    outside of the code that is being added.  git can be used to send
+    patches to Linus after -rc1 is released, but the patches need to also be
+    sent to a public mailing list for review.
+  - A new -rc is released whenever Linus deems the current git tree to
+    be in a reasonably sane state adequate for testing.  The goal is to
+    release a new -rc kernel every week.
+  - Process continues until the kernel is considered "ready", the
+    process should last around 6 weeks.
+
+It is worth mentioning what Andrew Morton wrote on the linux-kernel
+mailing list about kernel releases:
+
+	*"Nobody knows when a kernel will be released, because it's
+	released according to perceived bug status, not according to a
+	preconceived timeline."*
+
+Various stable trees with multiple major numbers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Kernels with 3-part versions are -stable kernels. They contain
+relatively small and critical fixes for security problems or significant
+regressions discovered in a given major mainline release. Each release
+in a major stable series increments the third part of the version
+number, keeping the first two parts the same.
+
+This is the recommended branch for users who want the most recent stable
+kernel and are not interested in helping test development/experimental
+versions.
+
+Stable trees are maintained by the "stable" team <stable@vger.kernel.org>, and
+are released as needs dictate.  The normal release period is approximately
+two weeks, but it can be longer if there are no pressing problems.  A
+security-related problem, instead, can cause a release to happen almost
+instantly.
+
+The file :ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
+in the kernel tree documents what kinds of changes are acceptable for
+the -stable tree, and how the release process works.
+
+Subsystem-specific trees
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+The maintainers of the various kernel subsystems --- and also many
+kernel subsystem developers --- expose their current state of
+development in source repositories.  That way, others can see what is
+happening in the different areas of the kernel.  In areas where
+development is rapid, a developer may be asked to base his submissions
+onto such a subsystem kernel tree so that conflicts between the
+submission and other already ongoing work are avoided.
+
+Most of these repositories are git trees, but there are also other SCMs
+in use, or patch queues being published as quilt series.  Addresses of
+these subsystem repositories are listed in the MAINTAINERS file.  Many
+of them can be browsed at https://git.kernel.org/.
+
+Before a proposed patch is committed to such a subsystem tree, it is
+subject to review which primarily happens on mailing lists (see the
+respective section below).  For several kernel subsystems, this review
+process is tracked with the tool patchwork.  Patchwork offers a web
+interface which shows patch postings, any comments on a patch or
+revisions to it, and maintainers can mark patches as under review,
+accepted, or rejected.  Most of these patchwork sites are listed at
+https://patchwork.kernel.org/.
+
+linux-next integration testing tree
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Before updates from subsystem trees are merged into the mainline tree,
+they need to be integration-tested.  For this purpose, a special
+testing repository exists into which virtually all subsystem trees are
+pulled on an almost daily basis:
+
+	https://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
+
+This way, the linux-next gives a summary outlook onto what will be
+expected to go into the mainline kernel at the next merge period.
+Adventurous testers are very welcome to runtime-test the linux-next.
+
+
+Bug Reporting
+-------------
+
+https://bugzilla.kernel.org is where the Linux kernel developers track kernel
+bugs.  Users are encouraged to report all bugs that they find in this
+tool.  For details on how to use the kernel bugzilla, please see:
+
+	https://bugzilla.kernel.org/page.cgi?id=faq.html
+
+The file :ref:`admin-guide/reporting-bugs.rst <reportingbugs>`
+in the main kernel source directory has a good
+template for how to report a possible kernel bug, and details what kind
+of information is needed by the kernel developers to help track down the
+problem.
+
+
+Managing bug reports
+--------------------
+
+One of the best ways to put into practice your hacking skills is by fixing
+bugs reported by other people. Not only you will help to make the kernel
+more stable, but you'll also learn to fix real world problems and you will
+improve your skills, and other developers will be aware of your presence.
+Fixing bugs is one of the best ways to get merits among other developers,
+because not many people like wasting time fixing other people's bugs.
+
+To work in the already reported bug reports, go to https://bugzilla.kernel.org.
+
+
+Mailing lists
+-------------
+
+As some of the above documents describe, the majority of the core kernel
+developers participate on the Linux Kernel Mailing list.  Details on how
+to subscribe and unsubscribe from the list can be found at:
+
+	http://vger.kernel.org/vger-lists.html#linux-kernel
+
+There are archives of the mailing list on the web in many different
+places.  Use a search engine to find these archives.  For example:
+
+	http://dir.gmane.org/gmane.linux.kernel
+
+It is highly recommended that you search the archives about the topic
+you want to bring up, before you post it to the list. A lot of things
+already discussed in detail are only recorded at the mailing list
+archives.
+
+Most of the individual kernel subsystems also have their own separate
+mailing list where they do their development efforts.  See the
+MAINTAINERS file for a list of what these lists are for the different
+groups.
+
+Many of the lists are hosted on kernel.org. Information on them can be
+found at:
+
+	http://vger.kernel.org/vger-lists.html
+
+Please remember to follow good behavioral habits when using the lists.
+Though a bit cheesy, the following URL has some simple guidelines for
+interacting with the list (or any list):
+
+	http://www.albion.com/netiquette/
+
+If multiple people respond to your mail, the CC: list of recipients may
+get pretty large. Don't remove anybody from the CC: list without a good
+reason, or don't reply only to the list address. Get used to receiving the
+mail twice, one from the sender and the one from the list, and don't try
+to tune that by adding fancy mail-headers, people will not like it.
+
+Remember to keep the context and the attribution of your replies intact,
+keep the "John Kernelhacker wrote ...:" lines at the top of your reply, and
+add your statements between the individual quoted sections instead of
+writing at the top of the mail.
+
+If you add patches to your mail, make sure they are plain readable text
+as stated in :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`.
+Kernel developers don't want to deal with
+attachments or compressed patches; they may want to comment on
+individual lines of your patch, which works only that way. Make sure you
+use a mail program that does not mangle spaces and tab characters. A
+good first test is to send the mail to yourself and try to apply your
+own patch by yourself. If that doesn't work, get your mail program fixed
+or change it until it works.
+
+Above all, please remember to show respect to other subscribers.
+
+
+Working with the community
+--------------------------
+
+The goal of the kernel community is to provide the best possible kernel
+there is.  When you submit a patch for acceptance, it will be reviewed
+on its technical merits and those alone.  So, what should you be
+expecting?
+
+  - criticism
+  - comments
+  - requests for change
+  - requests for justification
+  - silence
+
+Remember, this is part of getting your patch into the kernel.  You have
+to be able to take criticism and comments about your patches, evaluate
+them at a technical level and either rework your patches or provide
+clear and concise reasoning as to why those changes should not be made.
+If there are no responses to your posting, wait a few days and try
+again, sometimes things get lost in the huge volume.
+
+What should you not do?
+
+  - expect your patch to be accepted without question
+  - become defensive
+  - ignore comments
+  - resubmit the patch without making any of the requested changes
+
+In a community that is looking for the best technical solution possible,
+there will always be differing opinions on how beneficial a patch is.
+You have to be cooperative, and willing to adapt your idea to fit within
+the kernel.  Or at least be willing to prove your idea is worth it.
+Remember, being wrong is acceptable as long as you are willing to work
+toward a solution that is right.
+
+It is normal that the answers to your first patch might simply be a list
+of a dozen things you should correct.  This does **not** imply that your
+patch will not be accepted, and it is **not** meant against you
+personally.  Simply correct all issues raised against your patch and
+resend it.
+
+
+Differences between the kernel community and corporate structures
+-----------------------------------------------------------------
+
+The kernel community works differently than most traditional corporate
+development environments.  Here are a list of things that you can try to
+do to avoid problems:
+
+  Good things to say regarding your proposed changes:
+
+    - "This solves multiple problems."
+    - "This deletes 2000 lines of code."
+    - "Here is a patch that explains what I am trying to describe."
+    - "I tested it on 5 different architectures..."
+    - "Here is a series of small patches that..."
+    - "This increases performance on typical machines..."
+
+  Bad things you should avoid saying:
+
+    - "We did it this way in AIX/ptx/Solaris, so therefore it must be
+      good..."
+    - "I've being doing this for 20 years, so..."
+    - "This is required for my company to make money"
+    - "This is for our Enterprise product line."
+    - "Here is my 1000 page design document that describes my idea"
+    - "I've been working on this for 6 months..."
+    - "Here's a 5000 line patch that..."
+    - "I rewrote all of the current mess, and here it is..."
+    - "I have a deadline, and this patch needs to be applied now."
+
+Another way the kernel community is different than most traditional
+software engineering work environments is the faceless nature of
+interaction.  One benefit of using email and irc as the primary forms of
+communication is the lack of discrimination based on gender or race.
+The Linux kernel work environment is accepting of women and minorities
+because all you are is an email address.  The international aspect also
+helps to level the playing field because you can't guess gender based on
+a person's name. A man may be named Andrea and a woman may be named Pat.
+Most women who have worked in the Linux kernel and have expressed an
+opinion have had positive experiences.
+
+The language barrier can cause problems for some people who are not
+comfortable with English.  A good grasp of the language can be needed in
+order to get ideas across properly on mailing lists, so it is
+recommended that you check your emails to make sure they make sense in
+English before sending them.
+
+
+Break up your changes
+---------------------
+
+The Linux kernel community does not gladly accept large chunks of code
+dropped on it all at once.  The changes need to be properly introduced,
+discussed, and broken up into tiny, individual portions.  This is almost
+the exact opposite of what companies are used to doing.  Your proposal
+should also be introduced very early in the development process, so that
+you can receive feedback on what you are doing.  It also lets the
+community feel that you are working with them, and not simply using them
+as a dumping ground for your feature.  However, don't send 50 emails at
+one time to a mailing list, your patch series should be smaller than
+that almost all of the time.
+
+The reasons for breaking things up are the following:
+
+1) Small patches increase the likelihood that your patches will be
+   applied, since they don't take much time or effort to verify for
+   correctness.  A 5 line patch can be applied by a maintainer with
+   barely a second glance. However, a 500 line patch may take hours to
+   review for correctness (the time it takes is exponentially
+   proportional to the size of the patch, or something).
+
+   Small patches also make it very easy to debug when something goes
+   wrong.  It's much easier to back out patches one by one than it is
+   to dissect a very large patch after it's been applied (and broken
+   something).
+
+2) It's important not only to send small patches, but also to rewrite
+   and simplify (or simply re-order) patches before submitting them.
+
+Here is an analogy from kernel developer Al Viro:
+
+	*"Think of a teacher grading homework from a math student.  The
+	teacher does not want to see the student's trials and errors
+	before they came up with the solution. They want to see the
+	cleanest, most elegant answer.  A good student knows this, and
+	would never submit her intermediate work before the final
+	solution.*
+
+	*The same is true of kernel development. The maintainers and
+	reviewers do not want to see the thought process behind the
+	solution to the problem one is solving. They want to see a
+	simple and elegant solution."*
+
+It may be challenging to keep the balance between presenting an elegant
+solution and working together with the community and discussing your
+unfinished work. Therefore it is good to get early in the process to
+get feedback to improve your work, but also keep your changes in small
+chunks that they may get already accepted, even when your whole task is
+not ready for inclusion now.
+
+Also realize that it is not acceptable to send patches for inclusion
+that are unfinished and will be "fixed up later."
+
+
+Justify your change
+-------------------
+
+Along with breaking up your patches, it is very important for you to let
+the Linux community know why they should add this change.  New features
+must be justified as being needed and useful.
+
+
+Document your change
+--------------------
+
+When sending in your patches, pay special attention to what you say in
+the text in your email.  This information will become the ChangeLog
+information for the patch, and will be preserved for everyone to see for
+all time.  It should describe the patch completely, containing:
+
+  - why the change is necessary
+  - the overall design approach in the patch
+  - implementation details
+  - testing results
+
+For more details on what this should all look like, please see the
+ChangeLog section of the document:
+
+  "The Perfect Patch"
+      https://www.ozlabs.org/~akpm/stuff/tpp.txt
+
+
+All of these things are sometimes very hard to do. It can take years to
+perfect these practices (if at all). It's a continuous process of
+improvement that requires a lot of patience and determination. But
+don't give up, it's possible. Many have done it before, and each had to
+start exactly where you are now.
+
+
+
+
+----------
+
+Thanks to Paolo Ciarrocchi who allowed the "Development Process"
+(https://lwn.net/Articles/94386/) section
+to be based on text he had written, and to Randy Dunlap and Gerrit
+Huizenga for some of the list of things you should and should not say.
+Also thanks to Pat Mochel, Hanna Linder, Randy Dunlap, Kay Sievers,
+Vojtech Pavlik, Jan Kara, Josh Boyer, Kees Cook, Andrew Morton, Andi
+Kleen, Vadim Lobanov, Jesper Juhl, Adrian Bunk, Keri Harris, Frans Pop,
+David A. Wheeler, Junio Hamano, Michael Kerrisk, and Alex Shepard for
+their review, comments, and contributions.  Without their help, this
+document would not have been possible.
+
+
+
+Maintainer: Greg Kroah-Hartman <greg@kroah.com>
diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst
new file mode 100644
index 000000000..dd231ffc8
--- /dev/null
+++ b/Documentation/process/index.rst
@@ -0,0 +1,71 @@
+.. raw:: latex
+
+	\renewcommand\thesection*
+	\renewcommand\thesubsection*
+
+.. _process_index:
+
+Working with the kernel development community
+=============================================
+
+So you want to be a Linux kernel developer?  Welcome!  While there is a lot
+to be learned about the kernel in a technical sense, it is also important
+to learn about how our community works.  Reading these documents will make
+it much easier for you to get your changes merged with a minimum of
+trouble.
+
+Below are the essential guides that every developer should read.
+
+.. toctree::
+   :maxdepth: 1
+
+   license-rules
+   howto
+   code-of-conduct
+   code-of-conduct-interpretation
+   development-process
+   submitting-patches
+   programming-language
+   coding-style
+   maintainer-pgp-guide
+   email-clients
+   kernel-enforcement-statement
+   kernel-driver-statement
+
+Other guides to the community that are of interest to most developers are:
+
+.. toctree::
+   :maxdepth: 1
+
+   changes
+   submitting-drivers
+   stable-api-nonsense
+   management-style
+   stable-kernel-rules
+   submit-checklist
+   kernel-docs
+   deprecated
+   embargoed-hardware-issues
+   maintainers
+
+These are some overall technical guides that have been put here for now for
+lack of a better place.
+
+.. toctree::
+   :maxdepth: 1
+
+   applying-patches
+   adding-syscalls
+   magic-number
+   volatile-considered-harmful
+   botching-up-ioctls
+   clang-format
+   ../riscv/patch-acceptance
+   ../core-api/unaligned-memory-access
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/process/kernel-docs.rst b/Documentation/process/kernel-docs.rst
new file mode 100644
index 000000000..64786e500
--- /dev/null
+++ b/Documentation/process/kernel-docs.rst
@@ -0,0 +1,608 @@
+.. _kernel_docs:
+
+Index of Documentation for People Interested in Writing and/or Understanding the Linux Kernel
+=============================================================================================
+
+          Juan-Mariano de Goyeneche <jmseyas@dit.upm.es>
+
+The need for a document like this one became apparent in the
+linux-kernel mailing list as the same questions, asking for pointers
+to information, appeared again and again.
+
+Fortunately, as more and more people get to GNU/Linux, more and more
+get interested in the Kernel. But reading the sources is not always
+enough. It is easy to understand the code, but miss the concepts, the
+philosophy and design decisions behind this code.
+
+Unfortunately, not many documents are available for beginners to
+start. And, even if they exist, there was no "well-known" place which
+kept track of them. These lines try to cover this lack. All documents
+available on line known by the author are listed, while some reference
+books are also mentioned.
+
+PLEASE, if you know any paper not listed here or write a new document,
+send me an e-mail, and I'll include a reference to it here. Any
+corrections, ideas or comments are also welcomed.
+
+The papers that follow are listed in no particular order. All are
+cataloged with the following fields: the document's "Title", the
+"Author"/s, the "URL" where they can be found, some "Keywords" helpful
+when searching for specific topics, and a brief "Description" of the
+Document.
+
+Enjoy!
+
+.. note::
+
+   The documents on each section of this document are ordered by its
+   published date, from the newest to the oldest.
+
+Docs at the Linux Kernel tree
+-----------------------------
+
+The Sphinx books should be built with ``make {htmldocs | pdfdocs | epubdocs}``.
+
+    * Name: **linux/Documentation**
+
+      :Author: Many.
+      :Location: Documentation/
+      :Keywords: text files, Sphinx.
+      :Description: Documentation that comes with the kernel sources,
+        inside the Documentation directory. Some pages from this document
+        (including this document itself) have been moved there, and might
+        be more up to date than the web version.
+
+On-line docs
+------------
+
+    * Title: **Linux Kernel Mailing List Glossary**
+
+      :Author: various
+      :URL: https://kernelnewbies.org/KernelGlossary
+      :Date: rolling version
+      :Keywords: glossary, terms, linux-kernel.
+      :Description: From the introduction: "This glossary is intended as
+        a brief description of some of the acronyms and terms you may hear
+        during discussion of the Linux kernel".
+
+    * Title: **Tracing the Way of Data in a TCP Connection through the Linux Kernel**
+
+      :Author: Richard Sailer
+      :URL: https://archive.org/details/linux_kernel_data_flow_short_paper
+      :Date: 2016
+      :Keywords: Linux Kernel Networking, TCP, tracing, ftrace
+      :Description: A seminar paper explaining ftrace and how to use it for
+        understanding linux kernel internals,
+        illustrated at tracing the way of a TCP packet through the kernel.
+      :Abstract: *This short paper outlines the usage of ftrace a tracing framework
+        as a tool to understand a running Linux system.
+        Having obtained a trace-log a kernel hacker can read and understand
+        source code more determined and with context.
+        In a detailed example this approach is demonstrated in tracing
+        and the way of data in a TCP Connection through the kernel.
+        Finally this trace-log is used as base for more a exact conceptual
+        exploration and description of the Linux TCP/IP implementation.*
+
+    * Title: **On submitting kernel Patches**
+
+      :Author: Andi Kleen
+      :URL: http://halobates.de/on-submitting-kernel-patches.pdf
+      :Date: 2008
+      :Keywords: patches, review process, types of submissions, basic rules, case studies
+      :Description: This paper gives several experience values on what types of patches
+        there are and how likley they get merged.
+      :Abstract:
+        [...]. This paper examines some common problems for
+        submitting larger changes and some strategies to avoid problems.
+
+    * Title: **Linux Device Drivers, Third Edition**
+
+      :Author: Jonathan Corbet, Alessandro Rubini, Greg Kroah-Hartman
+      :URL: https://lwn.net/Kernel/LDD3/
+      :Date: 2005
+      :Description: A 600-page book covering the (2.6.10) driver
+        programming API and kernel hacking in general.  Available under the
+        Creative Commons Attribution-ShareAlike 2.0 license.
+      :note: You can also :ref:`purchase a copy from O'Reilly or elsewhere  <ldd3_published>`.
+
+    * Title: **Writing an ALSA Driver**
+
+      :Author: Takashi Iwai <tiwai@suse.de>
+      :URL: http://www.alsa-project.org/~iwai/writing-an-alsa-driver/index.html
+      :Date: 2005
+      :Keywords: ALSA, sound, soundcard, driver, lowlevel, hardware.
+      :Description: Advanced Linux Sound Architecture for developers,
+        both at kernel and user-level sides. ALSA is the Linux kernel
+        sound architecture in the 2.6 kernel version.
+
+    * Title: **Linux PCMCIA Programmer's Guide**
+
+      :Author: David Hinds.
+      :URL: http://pcmcia-cs.sourceforge.net/ftp/doc/PCMCIA-PROG.html
+      :Date: 2003
+      :Keywords: PCMCIA.
+      :Description: "This document describes how to write kernel device
+        drivers for the Linux PCMCIA Card Services interface. It also
+        describes how to write user-mode utilities for communicating with
+        Card Services.
+
+    * Title: **Linux Kernel Module Programming Guide**
+
+      :Author: Ori Pomerantz.
+      :URL: https://tldp.org/LDP/lkmpg/2.6/html/index.html
+      :Date: 2001
+      :Keywords: modules, GPL book, /proc, ioctls, system calls,
+        interrupt handlers .
+      :Description: Very nice 92 pages GPL book on the topic of modules
+        programming. Lots of examples.
+
+    * Title: **Global spinlock list and usage**
+
+      :Author: Rick Lindsley.
+      :URL: http://lse.sourceforge.net/lockhier/global-spin-lock
+      :Date: 2001
+      :Keywords: spinlock.
+      :Description: This is an attempt to document both the existence and
+        usage of the spinlocks in the Linux 2.4.5 kernel. Comprehensive
+        list of spinlocks showing when they are used, which functions
+        access them, how each lock is acquired, under what conditions it
+        is held, whether interrupts can occur or not while it is held...
+
+    * Title: **A Linux vm README**
+
+      :Author: Kanoj Sarcar.
+      :URL: http://kos.enix.org/pub/linux-vmm.html
+      :Date: 2001
+      :Keywords: virtual memory, mm, pgd, vma, page, page flags, page
+        cache, swap cache, kswapd.
+      :Description: Telegraphic, short descriptions and definitions
+        relating the Linux virtual memory implementation.
+
+    * Title: **Video4linux Drivers, Part 1: Video-Capture Device**
+
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/406
+      :Date: 2000
+      :Keywords: video4linux, driver, video capture, capture devices,
+        camera driver.
+      :Description: The title says it all.
+
+    * Title: **Video4linux Drivers, Part 2: Video-capture Devices**
+
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/429
+      :Date: 2000
+      :Keywords: video4linux, driver, video capture, capture devices,
+        camera driver, control, query capabilities, capability, facility.
+      :Description: The title says it all.
+
+    * Title: **Linux IP Networking. A Guide to the Implementation and Modification of the Linux Protocol Stack.**
+
+      :Author: Glenn Herrin.
+      :URL: http://www.cs.unh.edu/cnrg/gherrin
+      :Date: 2000
+      :Keywords: network, networking, protocol, IP, UDP, TCP, connection,
+        socket, receiving, transmitting, forwarding, routing, packets,
+        modules, /proc, sk_buff, FIB, tags.
+      :Description: Excellent paper devoted to the Linux IP Networking,
+        explaining anything from the kernel's to the user space
+        configuration tools' code. Very good to get a general overview of
+        the kernel networking implementation and understand all steps
+        packets follow from the time they are received at the network
+        device till they are delivered to applications. The studied kernel
+        code is from 2.2.14 version. Provides code for a working packet
+        dropper example.
+
+    * Title: **How To Make Sure Your Driver Will Work On The Power Macintosh**
+
+      :Author: Paul Mackerras.
+      :URL: http://www.linux-mag.com/id/261
+      :Date: 1999
+      :Keywords: Mac, Power Macintosh, porting, drivers, compatibility.
+      :Description: The title says it all.
+
+    * Title: **An Introduction to SCSI Drivers**
+
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/284
+      :Date: 1999
+      :Keywords: SCSI, device, driver.
+      :Description: The title says it all.
+
+    * Title: **Advanced SCSI Drivers And Other Tales**
+
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/307
+      :Date: 1999
+      :Keywords: SCSI, device, driver, advanced.
+      :Description: The title says it all.
+
+    * Title: **Writing Linux Mouse Drivers**
+
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/330
+      :Date: 1999
+      :Keywords: mouse, driver, gpm.
+      :Description: The title says it all.
+
+    * Title: **More on Mouse Drivers**
+
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/356
+      :Date: 1999
+      :Keywords: mouse, driver, gpm, races, asynchronous I/O.
+      :Description: The title still says it all.
+
+    * Title: **Writing Video4linux Radio Driver**
+
+      :Author: Alan Cox.
+      :URL: http://www.linux-mag.com/id/381
+      :Date: 1999
+      :Keywords: video4linux, driver, radio, radio devices.
+      :Description: The title says it all.
+
+    * Title: **I/O Event Handling Under Linux**
+
+      :Author: Richard Gooch.
+      :URL: https://web.mit.edu/~yandros/doc/io-events.html
+      :Date: 1999
+      :Keywords: IO, I/O, select(2), poll(2), FDs, aio_read(2), readiness
+        event queues.
+      :Description: From the Introduction: "I/O Event handling is about
+        how your Operating System allows you to manage a large number of
+        open files (file descriptors in UNIX/POSIX, or FDs) in your
+        application. You want the OS to notify you when FDs become active
+        (have data ready to be read or are ready for writing). Ideally you
+        want a mechanism that is scalable. This means a large number of
+        inactive FDs cost very little in memory and CPU time to manage".
+
+    * Title: **(nearly) Complete Linux Loadable Kernel Modules. The definitive guide for hackers, virus coders and system administrators.**
+
+      :Author: pragmatic/THC.
+      :URL: http://packetstormsecurity.org/docs/hack/LKM_HACKING.html
+      :Date: 1999
+      :Keywords: syscalls, intercept, hide, abuse, symbol table.
+      :Description: Interesting paper on how to abuse the Linux kernel in
+        order to intercept and modify syscalls, make
+        files/directories/processes invisible, become root, hijack ttys,
+        write kernel modules based virus... and solutions for admins to
+        avoid all those abuses.
+      :Notes: For 2.0.x kernels. Gives guidances to port it to 2.2.x
+        kernels.
+
+    * Name: **Linux Virtual File System**
+
+      :Author: Peter J. Braam.
+      :URL: http://www.coda.cs.cmu.edu/doc/talks/linuxvfs/
+      :Date: 1998
+      :Keywords: slides, VFS, inode, superblock, dentry, dcache.
+      :Description: Set of slides, presumably from a presentation on the
+        Linux VFS layer. Covers version 2.1.x, with dentries and the
+        dcache.
+
+    * Title: **The Venus kernel interface**
+
+      :Author: Peter J. Braam.
+      :URL: http://www.coda.cs.cmu.edu/doc/html/kernel-venus-protocol.html
+      :Date: 1998
+      :Keywords: coda, filesystem, venus, cache manager.
+      :Description: "This document describes the communication between
+        Venus and kernel level file system code needed for the operation
+        of the Coda filesystem. This version document is meant to describe
+        the current interface (version 1.0) as well as improvements we
+        envisage".
+
+    * Title: **Design and Implementation of the Second Extended Filesystem**
+
+      :Author: Rémy Card, Theodore Ts'o, Stephen Tweedie.
+      :URL: https://web.mit.edu/tytso/www/linux/ext2intro.html
+      :Date: 1998
+      :Keywords: ext2, linux fs history, inode, directory, link, devices,
+        VFS, physical structure, performance, benchmarks, ext2fs library,
+        ext2fs tools, e2fsck.
+      :Description: Paper written by three of the top ext2 hackers.
+        Covers Linux filesystems history, ext2 motivation, ext2 features,
+        design, physical structure on disk, performance, benchmarks,
+        e2fsck's passes description... A must read!
+      :Notes: This paper was first published in the Proceedings of the
+        First Dutch International Symposium on Linux, ISBN 90-367-0385-9.
+
+    * Title: **The Linux RAID-1, 4, 5 Code**
+
+      :Author: Ingo Molnar, Gadi Oxman and Miguel de Icaza.
+      :URL: http://www.linuxjournal.com/article.php?sid=2391
+      :Date: 1997
+      :Keywords: RAID, MD driver.
+      :Description: Linux Journal Kernel Korner article.
+      :Abstract: *A description of the implementation of the RAID-1,
+        RAID-4 and RAID-5 personalities of the MD device driver in the
+        Linux kernel, providing users with high performance and reliable,
+        secondary-storage capability using software*.
+
+    * Title: **Linux Kernel Hackers' Guide**
+
+      :Author: Michael K. Johnson.
+      :URL: https://www.tldp.org/LDP/khg/HyperNews/get/khg.html
+      :Date: 1997
+      :Keywords: device drivers, files, VFS, kernel interface, character vs
+        block devices, hardware interrupts, scsi, DMA, access to user memory,
+        memory allocation, timers.
+      :Description: A guide designed to help you get up to speed on the
+        concepts that are not intuitevly obvious, and to document the internal
+        structures of Linux.
+
+    * Title: **Dynamic Kernels: Modularized Device Drivers**
+
+      :Author: Alessandro Rubini.
+      :URL: http://www.linuxjournal.com/article.php?sid=1219
+      :Date: 1996
+      :Keywords: device driver, module, loading/unloading modules,
+        allocating resources.
+      :Description: Linux Journal Kernel Korner article.
+      :Abstract: *This is the first of a series of four articles
+        co-authored by Alessandro Rubini and Georg Zezchwitz which present
+        a practical approach to writing Linux device drivers as kernel
+        loadable modules. This installment presents an introduction to the
+        topic, preparing the reader to understand next month's
+        installment*.
+
+    * Title: **Dynamic Kernels: Discovery**
+
+      :Author: Alessandro Rubini.
+      :URL: http://www.linuxjournal.com/article.php?sid=1220
+      :Date: 1996
+      :Keywords: character driver, init_module, clean_up module,
+        autodetection, mayor number, minor number, file operations,
+        open(), close().
+      :Description: Linux Journal Kernel Korner article.
+      :Abstract: *This article, the second of four, introduces part of
+        the actual code to create custom module implementing a character
+        device driver. It describes the code for module initialization and
+        cleanup, as well as the open() and close() system calls*.
+
+    * Title: **The Devil's in the Details**
+
+      :Author: Georg v. Zezschwitz and Alessandro Rubini.
+      :URL: http://www.linuxjournal.com/article.php?sid=1221
+      :Date: 1996
+      :Keywords: read(), write(), select(), ioctl(), blocking/non
+        blocking mode, interrupt handler.
+      :Description: Linux Journal Kernel Korner article.
+      :Abstract: *This article, the third of four on writing character
+        device drivers, introduces concepts of reading, writing, and using
+        ioctl-calls*.
+
+    * Title: **Dissecting Interrupts and Browsing DMA**
+
+      :Author: Alessandro Rubini and Georg v. Zezschwitz.
+      :URL: https://www.linuxjournal.com/article.php?sid=1222
+      :Date: 1996
+      :Keywords: interrupts, irqs, DMA, bottom halves, task queues.
+      :Description: Linux Journal Kernel Korner article.
+      :Abstract: *This is the fourth in a series of articles about
+        writing character device drivers as loadable kernel modules. This
+        month, we further investigate the field of interrupt handling.
+        Though it is conceptually simple, practical limitations and
+        constraints make this an ''interesting'' part of device driver
+        writing, and several different facilities have been provided for
+        different situations. We also investigate the complex topic of
+        DMA*.
+
+    * Title: **Device Drivers Concluded**
+
+      :Author: Georg v. Zezschwitz.
+      :URL: https://www.linuxjournal.com/article.php?sid=1287
+      :Date: 1996
+      :Keywords: address spaces, pages, pagination, page management,
+        demand loading, swapping, memory protection, memory mapping, mmap,
+        virtual memory areas (VMAs), vremap, PCI.
+      :Description: Finally, the above turned out into a five articles
+        series. This latest one's introduction reads: "This is the last of
+        five articles about character device drivers. In this final
+        section, Georg deals with memory mapping devices, beginning with
+        an overall description of the Linux memory management concepts".
+
+    * Title: **Network Buffers And Memory Management**
+
+      :Author: Alan Cox.
+      :URL: https://www.linuxjournal.com/article.php?sid=1312
+      :Date: 1996
+      :Keywords: sk_buffs, network devices, protocol/link layer
+        variables, network devices flags, transmit, receive,
+        configuration, multicast.
+      :Description: Linux Journal Kernel Korner.
+      :Abstract: *Writing a network device driver for Linux is fundamentally
+        simple---most of the complexity (other than talking to the
+        hardware) involves managing network packets in memory*.
+
+    * Title: **Analysis of the Ext2fs structure**
+
+      :Author: Louis-Dominique Dubeau.
+      :URL: https://teaching.csse.uwa.edu.au/units/CITS2002/fs-ext2/
+      :Date: 1994
+      :Keywords: ext2, filesystem, ext2fs.
+      :Description: Description of ext2's blocks, directories, inodes,
+        bitmaps, invariants...
+
+Published books
+---------------
+
+    * Title: **Linux Treiber entwickeln**
+
+      :Author: Jürgen Quade, Eva-Katharina Kunst
+      :Publisher: dpunkt.verlag
+      :Date: Oct 2015 (4th edition)
+      :Pages: 688
+      :ISBN: 978-3-86490-288-8
+      :Note: German. The third edition from 2011 is
+         much cheaper and still quite up-to-date.
+
+    * Title: **Linux Kernel Networking: Implementation and Theory**
+
+      :Author: Rami Rosen
+      :Publisher: Apress
+      :Date: December 22, 2013
+      :Pages: 648
+      :ISBN: 978-1430261964
+
+    * Title: **Embedded Linux Primer: A practical Real-World Approach, 2nd Edition**
+
+      :Author: Christopher Hallinan
+      :Publisher: Pearson
+      :Date: November, 2010
+      :Pages: 656
+      :ISBN: 978-0137017836
+
+    * Title: **Linux Kernel Development, 3rd Edition**
+
+      :Author: Robert Love
+      :Publisher: Addison-Wesley
+      :Date: July, 2010
+      :Pages: 440
+      :ISBN: 978-0672329463
+
+    * Title: **Essential Linux Device Drivers**
+
+      :Author: Sreekrishnan Venkateswaran
+      :Published: Prentice Hall
+      :Date: April, 2008
+      :Pages: 744
+      :ISBN: 978-0132396554
+
+.. _ldd3_published:
+
+    * Title: **Linux Device Drivers, 3rd Edition**
+
+      :Authors: Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman
+      :Publisher: O'Reilly & Associates
+      :Date: 2005
+      :Pages: 636
+      :ISBN: 0-596-00590-3
+      :Notes: Further information in
+        http://www.oreilly.com/catalog/linuxdrive3/
+        PDF format, URL: https://lwn.net/Kernel/LDD3/
+
+    * Title: **Linux Kernel Internals**
+
+      :Author: Michael Beck
+      :Publisher: Addison-Wesley
+      :Date: 1997
+      :ISBN: 0-201-33143-8 (second edition)
+
+    * Title: **Programmation Linux 2.0 API systeme et fonctionnement du noyau**
+
+      :Author: Remy Card, Eric Dumas, Franck Mevel
+      :Publisher: Eyrolles
+      :Date: 1997
+      :Pages: 520
+      :ISBN: 2-212-08932-5
+      :Notes: French
+
+    * Title: **The Design and Implementation of the 4.4 BSD UNIX Operating System**
+
+      :Author: Marshall Kirk McKusick, Keith Bostic, Michael J. Karels,
+        John S. Quarterman
+      :Publisher: Addison-Wesley
+      :Date: 1996
+      :ISBN: 0-201-54979-4
+
+    * Title: **Unix internals -- the new frontiers**
+
+      :Author: Uresh Vahalia
+      :Publisher: Prentice Hall
+      :Date: 1996
+      :Pages: 600
+      :ISBN: 0-13-101908-2
+
+    * Title: **Programming for the real world - POSIX.4**
+
+      :Author: Bill O. Gallmeister
+      :Publisher: O'Reilly & Associates, Inc
+      :Date: 1995
+      :Pages: 552
+      :ISBN: I-56592-074-0
+      :Notes: Though not being directly about Linux, Linux aims to be
+        POSIX. Good reference.
+
+    * Title:  **UNIX  Systems  for  Modern Architectures: Symmetric Multiprocessing and Caching for Kernel Programmers**
+
+      :Author: Curt Schimmel
+      :Publisher: Addison Wesley
+      :Date: June, 1994
+      :Pages: 432
+      :ISBN: 0-201-63338-8
+
+    * Title: **The Design and Implementation of the 4.3 BSD UNIX Operating System**
+
+      :Author: Samuel J. Leffler, Marshall Kirk McKusick, Michael J
+        Karels, John S. Quarterman
+      :Publisher: Addison-Wesley
+      :Date: 1989 (reprinted with corrections on October, 1990)
+      :ISBN: 0-201-06196-1
+
+    * Title: **The Design of the UNIX Operating System**
+
+      :Author: Maurice J. Bach
+      :Publisher: Prentice Hall
+      :Date: 1986
+      :Pages: 471
+      :ISBN: 0-13-201757-1
+
+Miscellaneous
+-------------
+
+    * Name: **Cross-Referencing Linux**
+
+      :URL: https://elixir.bootlin.com/
+      :Keywords: Browsing source code.
+      :Description: Another web-based Linux kernel source code browser.
+        Lots of cross references to variables and functions. You can see
+        where they are defined and where they are used.
+
+    * Name: **Linux Weekly News**
+
+      :URL: https://lwn.net
+      :Keywords: latest kernel news.
+      :Description: The title says it all. There's a fixed kernel section
+        summarizing developers' work, bug fixes, new features and versions
+        produced during the week. Published every Thursday.
+
+    * Name: **The home page of Linux-MM**
+
+      :Author: The Linux-MM team.
+      :URL: https://linux-mm.org/
+      :Keywords: memory management, Linux-MM, mm patches, TODO, docs,
+        mailing list.
+      :Description: Site devoted to Linux Memory Management development.
+        Memory related patches, HOWTOs, links, mm developers... Don't miss
+        it if you are interested in memory management development!
+
+    * Name: **Kernel Newbies IRC Channel and Website**
+
+      :URL: https://www.kernelnewbies.org
+      :Keywords: IRC, newbies, channel, asking doubts.
+      :Description: #kernelnewbies on irc.oftc.net.
+        #kernelnewbies is an IRC network dedicated to the 'newbie'
+        kernel hacker. The audience mostly consists of people who are
+        learning about the kernel, working on kernel projects or
+        professional kernel hackers that want to help less seasoned kernel
+        people.
+        #kernelnewbies is on the OFTC IRC Network.
+        Try irc.oftc.net as your server and then /join #kernelnewbies.
+        The kernelnewbies website also hosts articles, documents, FAQs...
+
+    * Name: **linux-kernel mailing list archives and search engines**
+
+      :URL: http://vger.kernel.org/vger-lists.html
+      :URL: http://www.uwsg.indiana.edu/hypermail/linux/kernel/index.html
+      :URL: http://groups.google.com/group/mlist.linux.kernel
+      :Keywords: linux-kernel, archives, search.
+      :Description: Some of the linux-kernel mailing list archivers. If
+        you have a better/another one, please let me know.
+
+-------
+
+Document last updated on Tue 2016-Sep-20
+
+This document is based on:
+ https://www.dit.upm.es/~jmseyas/linux/kernel/hackers-docs.html
diff --git a/Documentation/process/kernel-driver-statement.rst b/Documentation/process/kernel-driver-statement.rst
new file mode 100644
index 000000000..a849790a6
--- /dev/null
+++ b/Documentation/process/kernel-driver-statement.rst
@@ -0,0 +1,202 @@
+.. _process_statement_driver:
+
+Kernel Driver Statement
+-----------------------
+
+Position Statement on Linux Kernel Modules
+==========================================
+
+
+We, the undersigned Linux kernel developers, consider any closed-source
+Linux kernel module or driver to be harmful and undesirable. We have
+repeatedly found them to be detrimental to Linux users, businesses, and
+the greater Linux ecosystem. Such modules negate the openness,
+stability, flexibility, and maintainability of the Linux development
+model and shut their users off from the expertise of the Linux
+community. Vendors that provide closed-source kernel modules force their
+customers to give up key Linux advantages or choose new vendors.
+Therefore, in order to take full advantage of the cost savings and
+shared support benefits open source has to offer, we urge vendors to
+adopt a policy of supporting their customers on Linux with open-source
+kernel code.
+
+We speak only for ourselves, and not for any company we might work for
+today, have in the past, or will in the future.
+
+ - Dave Airlie
+ - Nick Andrew
+ - Jens Axboe
+ - Ralf Baechle
+ - Felipe Balbi
+ - Ohad Ben-Cohen
+ - Muli Ben-Yehuda
+ - Jiri Benc
+ - Arnd Bergmann
+ - Thomas Bogendoerfer
+ - Vitaly Bordug
+ - James Bottomley
+ - Josh Boyer
+ - Neil Brown
+ - Mark Brown
+ - David Brownell
+ - Michael Buesch
+ - Franck Bui-Huu
+ - Adrian Bunk
+ - François Cami
+ - Ralph Campbell
+ - Luiz Fernando N. Capitulino
+ - Mauro Carvalho Chehab
+ - Denis Cheng
+ - Jonathan Corbet
+ - Glauber Costa
+ - Alan Cox
+ - Magnus Damm
+ - Ahmed S. Darwish
+ - Robert P. J. Day
+ - Hans de Goede
+ - Arnaldo Carvalho de Melo
+ - Helge Deller
+ - Jean Delvare
+ - Mathieu Desnoyers
+ - Sven-Thorsten Dietrich
+ - Alexey Dobriyan
+ - Daniel Drake
+ - Alex Dubov
+ - Randy Dunlap
+ - Michael Ellerman
+ - Pekka Enberg
+ - Jan Engelhardt
+ - Mark Fasheh
+ - J. Bruce Fields
+ - Larry Finger
+ - Jeremy Fitzhardinge
+ - Mike Frysinger
+ - Kumar Gala
+ - Robin Getz
+ - Liam Girdwood
+ - Jan-Benedict Glaw
+ - Thomas Gleixner
+ - Brice Goglin
+ - Cyrill Gorcunov
+ - Andy Gospodarek
+ - Thomas Graf
+ - Krzysztof Halasa
+ - Harvey Harrison
+ - Stephen Hemminger
+ - Michael Hennerich
+ - Tejun Heo
+ - Benjamin Herrenschmidt
+ - Kristian Høgsberg
+ - Henrique de Moraes Holschuh
+ - Marcel Holtmann
+ - Mike Isely
+ - Takashi Iwai
+ - Olof Johansson
+ - Dave Jones
+ - Jesper Juhl
+ - Matthias Kaehlcke
+ - Kenji Kaneshige
+ - Jan Kara
+ - Jeremy Kerr
+ - Russell King
+ - Olaf Kirch
+ - Roel Kluin
+ - Hans-Jürgen Koch
+ - Auke Kok
+ - Peter Korsgaard
+ - Jiri Kosina
+ - Aaro Koskinen
+ - Mariusz Kozlowski
+ - Greg Kroah-Hartman
+ - Michael Krufky
+ - Aneesh Kumar
+ - Clemens Ladisch
+ - Christoph Lameter
+ - Gunnar Larisch
+ - Anders Larsen
+ - Grant Likely
+ - John W. Linville
+ - Yinghai Lu
+ - Tony Luck
+ - Pavel Machek
+ - Matt Mackall
+ - Paul Mackerras
+ - Roland McGrath
+ - Patrick McHardy
+ - Kyle McMartin
+ - Paul Menage
+ - Thierry Merle
+ - Eric Miao
+ - Akinobu Mita
+ - Ingo Molnar
+ - James Morris
+ - Andrew Morton
+ - Paul Mundt
+ - Oleg Nesterov
+ - Luca Olivetti
+ - S.Çağlar Onur
+ - Pierre Ossman
+ - Keith Owens
+ - Venkatesh Pallipadi
+ - Nick Piggin
+ - Nicolas Pitre
+ - Evgeniy Polyakov
+ - Richard Purdie
+ - Mike Rapoport
+ - Sam Ravnborg
+ - Gerrit Renker
+ - Stefan Richter
+ - David Rientjes
+ - Luis R. Rodriguez
+ - Stefan Roese
+ - Francois Romieu
+ - Rami Rosen
+ - Stephen Rothwell
+ - Maciej W. Rozycki
+ - Mark Salyzyn
+ - Yoshinori Sato
+ - Deepak Saxena
+ - Holger Schurig
+ - Amit Shah
+ - Yoshihiro Shimoda
+ - Sergei Shtylyov
+ - Kay Sievers
+ - Sebastian Siewior
+ - Rik Snel
+ - Jes Sorensen
+ - Alexey Starikovskiy
+ - Alan Stern
+ - Timur Tabi
+ - Hirokazu Takata
+ - Eliezer Tamir
+ - Eugene Teo
+ - Doug Thompson
+ - FUJITA Tomonori
+ - Dmitry Torokhov
+ - Marcelo Tosatti
+ - Steven Toth
+ - Theodore Tso
+ - Matthias Urlichs
+ - Geert Uytterhoeven
+ - Arjan van de Ven
+ - Ivo van Doorn
+ - Rik van Riel
+ - Wim Van Sebroeck
+ - Hans Verkuil
+ - Horst H. von Brand
+ - Dmitri Vorobiev
+ - Anton Vorontsov
+ - Daniel Walker
+ - Johannes Weiner
+ - Harald Welte
+ - Matthew Wilcox
+ - Dan J. Williams
+ - Darrick J. Wong
+ - David Woodhouse
+ - Chris Wright
+ - Bryan Wu
+ - Rafael J. Wysocki
+ - Herbert Xu
+ - Vlad Yasevich
+ - Peter Zijlstra
+ - Bartlomiej Zolnierkiewicz
diff --git a/Documentation/process/kernel-enforcement-statement.rst b/Documentation/process/kernel-enforcement-statement.rst
new file mode 100644
index 000000000..e5a1be476
--- /dev/null
+++ b/Documentation/process/kernel-enforcement-statement.rst
@@ -0,0 +1,163 @@
+.. _process_statement_kernel:
+
+Linux Kernel Enforcement Statement
+----------------------------------
+
+As developers of the Linux kernel, we have a keen interest in how our software
+is used and how the license for our software is enforced.  Compliance with the
+reciprocal sharing obligations of GPL-2.0 is critical to the long-term
+sustainability of our software and community.
+
+Although there is a right to enforce the separate copyright interests in the
+contributions made to our community, we share an interest in ensuring that
+individual enforcement actions are conducted in a manner that benefits our
+community and do not have an unintended negative impact on the health and
+growth of our software ecosystem.  In order to deter unhelpful enforcement
+actions, we agree that it is in the best interests of our development
+community to undertake the following commitment to users of the Linux kernel
+on behalf of ourselves and any successors to our copyright interests:
+
+    Notwithstanding the termination provisions of the GPL-2.0, we agree that
+    it is in the best interests of our development community to adopt the
+    following provisions of GPL-3.0 as additional permissions under our
+    license with respect to any non-defensive assertion of rights under the
+    license.
+
+	However, if you cease all violation of this License, then your license
+	from a particular copyright holder is reinstated (a) provisionally,
+	unless and until the copyright holder explicitly and finally
+	terminates your license, and (b) permanently, if the copyright holder
+	fails to notify you of the violation by some reasonable means prior to
+	60 days after the cessation.
+
+	Moreover, your license from a particular copyright holder is
+	reinstated permanently if the copyright holder notifies you of the
+	violation by some reasonable means, this is the first time you have
+	received notice of violation of this License (for any work) from that
+	copyright holder, and you cure the violation prior to 30 days after
+	your receipt of the notice.
+
+Our intent in providing these assurances is to encourage more use of the
+software.  We want companies and individuals to use, modify and distribute
+this software.  We want to work with users in an open and transparent way to
+eliminate any uncertainty about our expectations regarding compliance or
+enforcement that might limit adoption of our software.  We view legal action
+as a last resort, to be initiated only when other community efforts have
+failed to resolve the problem.
+
+Finally, once a non-compliance issue is resolved, we hope the user will feel
+welcome to join us in our efforts on this project.  Working together, we will
+be stronger.
+
+Except where noted below, we speak only for ourselves, and not for any company
+we might work for today, have in the past, or will in the future.
+
+  - Laura Abbott
+  - Bjorn Andersson (Linaro)
+  - Andrea Arcangeli
+  - Neil Armstrong
+  - Jens Axboe
+  - Pablo Neira Ayuso
+  - Khalid Aziz
+  - Ralf Baechle
+  - Felipe Balbi
+  - Arnd Bergmann
+  - Ard Biesheuvel
+  - Tim Bird
+  - Paolo Bonzini
+  - Christian Borntraeger
+  - Mark Brown (Linaro)
+  - Paul Burton
+  - Javier Martinez Canillas
+  - Rob Clark
+  - Kees Cook (Google)
+  - Jonathan Corbet
+  - Dennis Dalessandro
+  - Vivien Didelot (Savoir-faire Linux)
+  - Hans de Goede
+  - Mel Gorman (SUSE)
+  - Sven Eckelmann
+  - Alex Elder (Linaro)
+  - Fabio Estevam
+  - Larry Finger
+  - Bhumika Goyal
+  - Andy Gross
+  - Juergen Gross
+  - Shawn Guo
+  - Ulf Hansson
+  - Stephen Hemminger (Microsoft)
+  - Tejun Heo
+  - Rob Herring
+  - Masami Hiramatsu
+  - Michal Hocko
+  - Simon Horman
+  - Johan Hovold (Hovold Consulting AB)
+  - Christophe JAILLET
+  - Olof Johansson
+  - Lee Jones (Linaro)
+  - Heiner Kallweit
+  - Srinivas Kandagatla
+  - Jan Kara
+  - Shuah Khan (Samsung)
+  - David Kershner
+  - Jaegeuk Kim
+  - Namhyung Kim
+  - Colin Ian King
+  - Jeff Kirsher
+  - Greg Kroah-Hartman (Linux Foundation)
+  - Christian König
+  - Vinod Koul
+  - Krzysztof Kozlowski
+  - Viresh Kumar
+  - Aneesh Kumar K.V
+  - Julia Lawall
+  - Doug Ledford
+  - Chuck Lever (Oracle)
+  - Daniel Lezcano
+  - Shaohua Li
+  - Xin Long
+  - Tony Luck
+  - Catalin Marinas (Arm Ltd)
+  - Mike Marshall
+  - Chris Mason
+  - Paul E. McKenney
+  - Arnaldo Carvalho de Melo
+  - David S. Miller
+  - Ingo Molnar
+  - Kuninori Morimoto
+  - Trond Myklebust
+  - Martin K. Petersen (Oracle)
+  - Borislav Petkov
+  - Jiri Pirko
+  - Josh Poimboeuf
+  - Sebastian Reichel (Collabora)
+  - Guenter Roeck
+  - Joerg Roedel
+  - Leon Romanovsky
+  - Steven Rostedt (VMware)
+  - Frank Rowand
+  - Ivan Safonov
+  - Anna Schumaker
+  - Jes Sorensen
+  - K.Y. Srinivasan
+  - David Sterba (SUSE)
+  - Heiko Stuebner
+  - Jiri Kosina (SUSE)
+  - Willy Tarreau
+  - Dmitry Torokhov
+  - Linus Torvalds
+  - Thierry Reding
+  - Rik van Riel
+  - Luis R. Rodriguez
+  - Geert Uytterhoeven (Glider bvba)
+  - Eduardo Valentin (Amazon.com)
+  - Daniel Vetter
+  - Linus Walleij
+  - Richard Weinberger
+  - Dan Williams
+  - Rafael J. Wysocki
+  - Arvind Yadav
+  - Masahiro Yamada
+  - Wei Yongjun
+  - Lv Zheng
+  - Marc Zyngier (Arm Ltd)
diff --git a/Documentation/process/license-rules.rst b/Documentation/process/license-rules.rst
new file mode 100644
index 000000000..2ef44ada3
--- /dev/null
+++ b/Documentation/process/license-rules.rst
@@ -0,0 +1,485 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. _kernel_licensing:
+
+Linux kernel licensing rules
+============================
+
+The Linux Kernel is provided under the terms of the GNU General Public
+License version 2 only (GPL-2.0), as provided in LICENSES/preferred/GPL-2.0,
+with an explicit syscall exception described in
+LICENSES/exceptions/Linux-syscall-note, as described in the COPYING file.
+
+This documentation file provides a description of how each source file
+should be annotated to make its license clear and unambiguous.
+It doesn't replace the Kernel's license.
+
+The license described in the COPYING file applies to the kernel source
+as a whole, though individual source files can have a different license
+which is required to be compatible with the GPL-2.0::
+
+    GPL-1.0+  :  GNU General Public License v1.0 or later
+    GPL-2.0+  :  GNU General Public License v2.0 or later
+    LGPL-2.0  :  GNU Library General Public License v2 only
+    LGPL-2.0+ :  GNU Library General Public License v2 or later
+    LGPL-2.1  :  GNU Lesser General Public License v2.1 only
+    LGPL-2.1+ :  GNU Lesser General Public License v2.1 or later
+
+Aside from that, individual files can be provided under a dual license,
+e.g. one of the compatible GPL variants and alternatively under a
+permissive license like BSD, MIT etc.
+
+The User-space API (UAPI) header files, which describe the interface of
+user-space programs to the kernel are a special case.  According to the
+note in the kernel COPYING file, the syscall interface is a clear boundary,
+which does not extend the GPL requirements to any software which uses it to
+communicate with the kernel.  Because the UAPI headers must be includable
+into any source files which create an executable running on the Linux
+kernel, the exception must be documented by a special license expression.
+
+The common way of expressing the license of a source file is to add the
+matching boilerplate text into the top comment of the file.  Due to
+formatting, typos etc. these "boilerplates" are hard to validate for
+tools which are used in the context of license compliance.
+
+An alternative to boilerplate text is the use of Software Package Data
+Exchange (SPDX) license identifiers in each source file.  SPDX license
+identifiers are machine parsable and precise shorthands for the license
+under which the content of the file is contributed.  SPDX license
+identifiers are managed by the SPDX Workgroup at the Linux Foundation and
+have been agreed on by partners throughout the industry, tool vendors, and
+legal teams.  For further information see https://spdx.org/
+
+The Linux kernel requires the precise SPDX identifier in all source files.
+The valid identifiers used in the kernel are explained in the section
+`License identifiers`_ and have been retrieved from the official SPDX
+license list at https://spdx.org/licenses/ along with the license texts.
+
+License identifier syntax
+-------------------------
+
+1. Placement:
+
+   The SPDX license identifier in kernel files shall be added at the first
+   possible line in a file which can contain a comment.  For the majority
+   of files this is the first line, except for scripts which require the
+   '#!PATH_TO_INTERPRETER' in the first line.  For those scripts the SPDX
+   identifier goes into the second line.
+
+|
+
+2. Style:
+
+   The SPDX license identifier is added in form of a comment.  The comment
+   style depends on the file type::
+
+      C source:	// SPDX-License-Identifier: <SPDX License Expression>
+      C header:	/* SPDX-License-Identifier: <SPDX License Expression> */
+      ASM:	/* SPDX-License-Identifier: <SPDX License Expression> */
+      scripts:	# SPDX-License-Identifier: <SPDX License Expression>
+      .rst:	.. SPDX-License-Identifier: <SPDX License Expression>
+      .dts{i}:	// SPDX-License-Identifier: <SPDX License Expression>
+
+   If a specific tool cannot handle the standard comment style, then the
+   appropriate comment mechanism which the tool accepts shall be used. This
+   is the reason for having the "/\* \*/" style comment in C header
+   files. There was build breakage observed with generated .lds files where
+   'ld' failed to parse the C++ comment. This has been fixed by now, but
+   there are still older assembler tools which cannot handle C++ style
+   comments.
+
+|
+
+3. Syntax:
+
+   A <SPDX License Expression> is either an SPDX short form license
+   identifier found on the SPDX License List, or the combination of two
+   SPDX short form license identifiers separated by "WITH" when a license
+   exception applies. When multiple licenses apply, an expression consists
+   of keywords "AND", "OR" separating sub-expressions and surrounded by
+   "(", ")" .
+
+   License identifiers for licenses like [L]GPL with the 'or later' option
+   are constructed by using a "+" for indicating the 'or later' option.::
+
+      // SPDX-License-Identifier: GPL-2.0+
+      // SPDX-License-Identifier: LGPL-2.1+
+
+   WITH should be used when there is a modifier to a license needed.
+   For example, the linux kernel UAPI files use the expression::
+
+      // SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
+      // SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note
+
+   Other examples using WITH exceptions found in the kernel are::
+
+      // SPDX-License-Identifier: GPL-2.0 WITH mif-exception
+      // SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
+
+   Exceptions can only be used with particular License identifiers. The
+   valid License identifiers are listed in the tags of the exception text
+   file. For details see the point `Exceptions`_ in the chapter `License
+   identifiers`_.
+
+   OR should be used if the file is dual licensed and only one license is
+   to be selected.  For example, some dtsi files are available under dual
+   licenses::
+
+      // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+
+   Examples from the kernel for license expressions in dual licensed files::
+
+      // SPDX-License-Identifier: GPL-2.0 OR MIT
+      // SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+      // SPDX-License-Identifier: GPL-2.0 OR Apache-2.0
+      // SPDX-License-Identifier: GPL-2.0 OR MPL-1.1
+      // SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT
+      // SPDX-License-Identifier: GPL-1.0+ OR BSD-3-Clause OR OpenSSL
+
+   AND should be used if the file has multiple licenses whose terms all
+   apply to use the file. For example, if code is inherited from another
+   project and permission has been given to put it in the kernel, but the
+   original license terms need to remain in effect::
+
+      // SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) AND MIT
+
+   Another other example where both sets of license terms need to be
+   adhered to is::
+
+      // SPDX-License-Identifier: GPL-1.0+ AND LGPL-2.1+
+
+License identifiers
+-------------------
+
+The licenses currently used, as well as the licenses for code added to the
+kernel, can be broken down into:
+
+1. _`Preferred licenses`:
+
+   Whenever possible these licenses should be used as they are known to be
+   fully compatible and widely used.  These licenses are available from the
+   directory::
+
+      LICENSES/preferred/
+
+   in the kernel source tree.
+
+   The files in this directory contain the full license text and
+   `Metatags`_.  The file names are identical to the SPDX license
+   identifier which shall be used for the license in source files.
+
+   Examples::
+
+      LICENSES/preferred/GPL-2.0
+
+   Contains the GPL version 2 license text and the required metatags::
+
+      LICENSES/preferred/MIT
+
+   Contains the MIT license text and the required metatags
+
+   _`Metatags`:
+
+   The following meta tags must be available in a license file:
+
+   - Valid-License-Identifier:
+
+     One or more lines which declare which License Identifiers are valid
+     inside the project to reference this particular license text.  Usually
+     this is a single valid identifier, but e.g. for licenses with the 'or
+     later' options two identifiers are valid.
+
+   - SPDX-URL:
+
+     The URL of the SPDX page which contains additional information related
+     to the license.
+
+   - Usage-Guidance:
+
+     Freeform text for usage advice. The text must include correct examples
+     for the SPDX license identifiers as they should be put into source
+     files according to the `License identifier syntax`_ guidelines.
+
+   - License-Text:
+
+     All text after this tag is treated as the original license text
+
+   File format examples::
+
+      Valid-License-Identifier: GPL-2.0
+      Valid-License-Identifier: GPL-2.0+
+      SPDX-URL: https://spdx.org/licenses/GPL-2.0.html
+      Usage-Guide:
+        To use this license in source code, put one of the following SPDX
+	tag/value pairs into a comment according to the placement
+	guidelines in the licensing rules documentation.
+	For 'GNU General Public License (GPL) version 2 only' use:
+	  SPDX-License-Identifier: GPL-2.0
+	For 'GNU General Public License (GPL) version 2 or any later version' use:
+	  SPDX-License-Identifier: GPL-2.0+
+      License-Text:
+        Full license text
+
+   ::
+
+      SPDX-License-Identifier: MIT
+      SPDX-URL: https://spdx.org/licenses/MIT.html
+      Usage-Guide:
+	To use this license in source code, put the following SPDX
+	tag/value pair into a comment according to the placement
+	guidelines in the licensing rules documentation.
+	  SPDX-License-Identifier: MIT
+      License-Text:
+        Full license text
+
+|
+
+2. Deprecated licenses:
+
+   These licenses should only be used for existing code or for importing
+   code from a different project.  These licenses are available from the
+   directory::
+
+      LICENSES/deprecated/
+
+   in the kernel source tree.
+
+   The files in this directory contain the full license text and
+   `Metatags`_.  The file names are identical to the SPDX license
+   identifier which shall be used for the license in source files.
+
+   Examples::
+
+      LICENSES/deprecated/ISC
+
+   Contains the Internet Systems Consortium license text and the required
+   metatags::
+
+      LICENSES/deprecated/GPL-1.0
+
+   Contains the GPL version 1 license text and the required metatags.
+
+   Metatags:
+
+   The metatag requirements for 'other' licenses are identical to the
+   requirements of the `Preferred licenses`_.
+
+   File format example::
+
+      Valid-License-Identifier: ISC
+      SPDX-URL: https://spdx.org/licenses/ISC.html
+      Usage-Guide:
+        Usage of this license in the kernel for new code is discouraged
+	and it should solely be used for importing code from an already
+	existing project.
+        To use this license in source code, put the following SPDX
+	tag/value pair into a comment according to the placement
+	guidelines in the licensing rules documentation.
+	  SPDX-License-Identifier: ISC
+      License-Text:
+        Full license text
+
+|
+
+3. Dual Licensing Only
+
+   These licenses should only be used to dual license code with another
+   license in addition to a preferred license.  These licenses are available
+   from the directory::
+
+      LICENSES/dual/
+
+   in the kernel source tree.
+
+   The files in this directory contain the full license text and
+   `Metatags`_.  The file names are identical to the SPDX license
+   identifier which shall be used for the license in source files.
+
+   Examples::
+
+      LICENSES/dual/MPL-1.1
+
+   Contains the Mozilla Public License version 1.1 license text and the
+   required metatags::
+
+      LICENSES/dual/Apache-2.0
+
+   Contains the Apache License version 2.0 license text and the required
+   metatags.
+
+   Metatags:
+
+   The metatag requirements for 'other' licenses are identical to the
+   requirements of the `Preferred licenses`_.
+
+   File format example::
+
+      Valid-License-Identifier: MPL-1.1
+      SPDX-URL: https://spdx.org/licenses/MPL-1.1.html
+      Usage-Guide:
+        Do NOT use. The MPL-1.1 is not GPL2 compatible. It may only be used for
+        dual-licensed files where the other license is GPL2 compatible.
+        If you end up using this it MUST be used together with a GPL2 compatible
+        license using "OR".
+        To use the Mozilla Public License version 1.1 put the following SPDX
+        tag/value pair into a comment according to the placement guidelines in
+        the licensing rules documentation:
+      SPDX-License-Identifier: MPL-1.1
+      License-Text:
+        Full license text
+
+|
+
+4. _`Exceptions`:
+
+   Some licenses can be amended with exceptions which grant certain rights
+   which the original license does not.  These exceptions are available
+   from the directory::
+
+      LICENSES/exceptions/
+
+   in the kernel source tree.  The files in this directory contain the full
+   exception text and the required `Exception Metatags`_.
+
+   Examples::
+
+      LICENSES/exceptions/Linux-syscall-note
+
+   Contains the Linux syscall exception as documented in the COPYING
+   file of the Linux kernel, which is used for UAPI header files.
+   e.g. /\* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note \*/::
+
+      LICENSES/exceptions/GCC-exception-2.0
+
+   Contains the GCC 'linking exception' which allows to link any binary
+   independent of its license against the compiled version of a file marked
+   with this exception. This is required for creating runnable executables
+   from source code which is not compatible with the GPL.
+
+   _`Exception Metatags`:
+
+   The following meta tags must be available in an exception file:
+
+   - SPDX-Exception-Identifier:
+
+     One exception identifier which can be used with SPDX license
+     identifiers.
+
+   - SPDX-URL:
+
+     The URL of the SPDX page which contains additional information related
+     to the exception.
+
+   - SPDX-Licenses:
+
+     A comma separated list of SPDX license identifiers for which the
+     exception can be used.
+
+   - Usage-Guidance:
+
+     Freeform text for usage advice. The text must be followed by correct
+     examples for the SPDX license identifiers as they should be put into
+     source files according to the `License identifier syntax`_ guidelines.
+
+   - Exception-Text:
+
+     All text after this tag is treated as the original exception text
+
+   File format examples::
+
+      SPDX-Exception-Identifier: Linux-syscall-note
+      SPDX-URL: https://spdx.org/licenses/Linux-syscall-note.html
+      SPDX-Licenses: GPL-2.0, GPL-2.0+, GPL-1.0+, LGPL-2.0, LGPL-2.0+, LGPL-2.1, LGPL-2.1+
+      Usage-Guidance:
+        This exception is used together with one of the above SPDX-Licenses
+	to mark user-space API (uapi) header files so they can be included
+	into non GPL compliant user-space application code.
+        To use this exception add it with the keyword WITH to one of the
+	identifiers in the SPDX-Licenses tag:
+	  SPDX-License-Identifier: <SPDX-License> WITH Linux-syscall-note
+      Exception-Text:
+        Full exception text
+
+   ::
+
+      SPDX-Exception-Identifier: GCC-exception-2.0
+      SPDX-URL: https://spdx.org/licenses/GCC-exception-2.0.html
+      SPDX-Licenses: GPL-2.0, GPL-2.0+
+      Usage-Guidance:
+        The "GCC Runtime Library exception 2.0" is used together with one
+	of the above SPDX-Licenses for code imported from the GCC runtime
+	library.
+        To use this exception add it with the keyword WITH to one of the
+	identifiers in the SPDX-Licenses tag:
+	  SPDX-License-Identifier: <SPDX-License> WITH GCC-exception-2.0
+      Exception-Text:
+        Full exception text
+
+
+All SPDX license identifiers and exceptions must have a corresponding file
+in the LICENSES subdirectories. This is required to allow tool
+verification (e.g. checkpatch.pl) and to have the licenses ready to read
+and extract right from the source, which is recommended by various FOSS
+organizations, e.g. the `FSFE REUSE initiative <https://reuse.software/>`_.
+
+_`MODULE_LICENSE`
+-----------------
+
+   Loadable kernel modules also require a MODULE_LICENSE() tag. This tag is
+   neither a replacement for proper source code license information
+   (SPDX-License-Identifier) nor in any way relevant for expressing or
+   determining the exact license under which the source code of the module
+   is provided.
+
+   The sole purpose of this tag is to provide sufficient information
+   whether the module is free software or proprietary for the kernel
+   module loader and for user space tools.
+
+   The valid license strings for MODULE_LICENSE() are:
+
+    ============================= =============================================
+    "GPL"			  Module is licensed under GPL version 2. This
+				  does not express any distinction between
+				  GPL-2.0-only or GPL-2.0-or-later. The exact
+				  license information can only be determined
+				  via the license information in the
+				  corresponding source files.
+
+    "GPL v2"			  Same as "GPL". It exists for historic
+				  reasons.
+
+    "GPL and additional rights"   Historical variant of expressing that the
+				  module source is dual licensed under a
+				  GPL v2 variant and MIT license. Please do
+				  not use in new code.
+
+    "Dual MIT/GPL"		  The correct way of expressing that the
+				  module is dual licensed under a GPL v2
+				  variant or MIT license choice.
+
+    "Dual BSD/GPL"		  The module is dual licensed under a GPL v2
+				  variant or BSD license choice. The exact
+				  variant of the BSD license can only be
+				  determined via the license information
+				  in the corresponding source files.
+
+    "Dual MPL/GPL"		  The module is dual licensed under a GPL v2
+				  variant or Mozilla Public License (MPL)
+				  choice. The exact variant of the MPL
+				  license can only be determined via the
+				  license information in the corresponding
+				  source files.
+
+    "Proprietary"		  The module is under a proprietary license.
+				  This string is solely for proprietary third
+				  party modules and cannot be used for modules
+				  which have their source code in the kernel
+				  tree. Modules tagged that way are tainting
+				  the kernel with the 'P' flag when loaded and
+				  the kernel module loader refuses to link such
+				  modules against symbols which are exported
+				  with EXPORT_SYMBOL_GPL().
+    ============================= =============================================
+
+
+
diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst
new file mode 100644
index 000000000..eee9b4455
--- /dev/null
+++ b/Documentation/process/magic-number.rst
@@ -0,0 +1,162 @@
+.. _magicnumbers:
+
+Linux magic numbers
+===================
+
+This file is a registry of magic numbers which are in use.  When you
+add a magic number to a structure, you should also add it to this
+file, since it is best if the magic numbers used by various structures
+are unique.
+
+It is a **very** good idea to protect kernel data structures with magic
+numbers.  This allows you to check at run time whether (a) a structure
+has been clobbered, or (b) you've passed the wrong structure to a
+routine.  This last is especially useful --- particularly when you are
+passing pointers to structures via a void * pointer.  The tty code,
+for example, does this frequently to pass driver-specific and line
+discipline-specific structures back and forth.
+
+The way to use magic numbers is to declare them at the beginning of
+the structure, like so::
+
+	struct tty_ldisc {
+		int	magic;
+		...
+	};
+
+Please follow this discipline when you are adding future enhancements
+to the kernel!  It has saved me countless hours of debugging,
+especially in the screwy cases where an array has been overrun and
+structures following the array have been overwritten.  Using this
+discipline, these cases get detected quickly and safely.
+
+Changelog::
+
+					Theodore Ts'o
+					31 Mar 94
+
+  The magic table is current to Linux 2.1.55.
+
+					Michael Chastain
+					<mailto:mec@shout.net>
+					22 Sep 1997
+
+  Now it should be up to date with Linux 2.1.112. Because
+  we are in feature freeze time it is very unlikely that
+  something will change before 2.2.x. The entries are
+  sorted by number field.
+
+					Krzysztof G. Baranowski
+					<mailto: kgb@knm.org.pl>
+					29 Jul 1998
+
+  Updated the magic table to Linux 2.5.45. Right over the feature freeze,
+  but it is possible that some new magic numbers will sneak into the
+  kernel before 2.6.x yet.
+
+					Petr Baudis
+					<pasky@ucw.cz>
+					03 Nov 2002
+
+  Updated the magic table to Linux 2.5.74.
+
+					Fabian Frederick
+					<ffrederick@users.sourceforge.net>
+					09 Jul 2003
+
+
+===================== ================ ======================== ==========================================
+Magic Name            Number           Structure                File
+===================== ================ ======================== ==========================================
+PG_MAGIC              'P'              pg_{read,write}_hdr      ``include/linux/pg.h``
+CMAGIC                0x0111           user                     ``include/linux/a.out.h``
+MKISS_DRIVER_MAGIC    0x04bf           mkiss_channel            ``drivers/net/mkiss.h``
+HDLC_MAGIC            0x239e           n_hdlc                   ``drivers/char/n_hdlc.c``
+APM_BIOS_MAGIC        0x4101           apm_user                 ``arch/x86/kernel/apm_32.c``
+CYCLADES_MAGIC        0x4359           cyclades_port            ``include/linux/cyclades.h``
+DB_MAGIC              0x4442           fc_info                  ``drivers/net/iph5526_novram.c``
+DL_MAGIC              0x444d           fc_info                  ``drivers/net/iph5526_novram.c``
+FASYNC_MAGIC          0x4601           fasync_struct            ``include/linux/fs.h``
+FF_MAGIC              0x4646           fc_info                  ``drivers/net/iph5526_novram.c``
+ISICOM_MAGIC          0x4d54           isi_port                 ``include/linux/isicom.h``
+PTY_MAGIC             0x5001                                    ``drivers/char/pty.c``
+PPP_MAGIC             0x5002           ppp                      ``include/linux/if_pppvar.h``
+SSTATE_MAGIC          0x5302           serial_state             ``include/linux/serial.h``
+SLIP_MAGIC            0x5302           slip                     ``drivers/net/slip.h``
+STRIP_MAGIC           0x5303           strip                    ``drivers/net/strip.c``
+X25_ASY_MAGIC         0x5303           x25_asy                  ``drivers/net/x25_asy.h``
+SIXPACK_MAGIC         0x5304           sixpack                  ``drivers/net/hamradio/6pack.h``
+AX25_MAGIC            0x5316           ax_disp                  ``drivers/net/mkiss.h``
+TTY_MAGIC             0x5401           tty_struct               ``include/linux/tty.h``
+MGSL_MAGIC            0x5401           mgsl_info                ``drivers/char/synclink.c``
+TTY_DRIVER_MAGIC      0x5402           tty_driver               ``include/linux/tty_driver.h``
+MGSLPC_MAGIC          0x5402           mgslpc_info              ``drivers/char/pcmcia/synclink_cs.c``
+TTY_LDISC_MAGIC       0x5403           tty_ldisc                ``include/linux/tty_ldisc.h``
+USB_SERIAL_MAGIC      0x6702           usb_serial               ``drivers/usb/serial/usb-serial.h``
+FULL_DUPLEX_MAGIC     0x6969                                    ``drivers/net/ethernet/dec/tulip/de2104x.c``
+USB_BLUETOOTH_MAGIC   0x6d02           usb_bluetooth            ``drivers/usb/class/bluetty.c``
+RFCOMM_TTY_MAGIC      0x6d02                                    ``net/bluetooth/rfcomm/tty.c``
+USB_SERIAL_PORT_MAGIC 0x7301           usb_serial_port          ``drivers/usb/serial/usb-serial.h``
+CG_MAGIC              0x00090255       ufs_cylinder_group       ``include/linux/ufs_fs.h``
+RPORT_MAGIC           0x00525001       r_port                   ``drivers/char/rocket_int.h``
+LSEMAGIC              0x05091998       lse                      ``drivers/fc4/fc.c``
+GDTIOCTL_MAGIC        0x06030f07       gdth_iowr_str            ``drivers/scsi/gdth_ioctl.h``
+RIEBL_MAGIC           0x09051990                                ``drivers/net/atarilance.c``
+NBD_REQUEST_MAGIC     0x12560953       nbd_request              ``include/linux/nbd.h``
+RED_MAGIC2            0x170fc2a5       (any)                    ``mm/slab.c``
+BAYCOM_MAGIC          0x19730510       baycom_state             ``drivers/net/baycom_epp.c``
+ISDN_X25IFACE_MAGIC   0x1e75a2b9       isdn_x25iface_proto_data ``drivers/isdn/isdn_x25iface.h``
+ECP_MAGIC             0x21504345       cdkecpsig                ``include/linux/cdk.h``
+LSOMAGIC              0x27091997       lso                      ``drivers/fc4/fc.c``
+LSMAGIC               0x2a3b4d2a       ls                       ``drivers/fc4/fc.c``
+WANPIPE_MAGIC         0x414C4453       sdla_{dump,exec}         ``include/linux/wanpipe.h``
+CS_CARD_MAGIC         0x43525553       cs_card                  ``sound/oss/cs46xx.c``
+LABELCL_MAGIC         0x4857434c       labelcl_info_s           ``include/asm/ia64/sn/labelcl.h``
+ISDN_ASYNC_MAGIC      0x49344C01       modem_info               ``include/linux/isdn.h``
+CTC_ASYNC_MAGIC       0x49344C01       ctc_tty_info             ``drivers/s390/net/ctctty.c``
+ISDN_NET_MAGIC        0x49344C02       isdn_net_local_s         ``drivers/isdn/i4l/isdn_net_lib.h``
+SAVEKMSG_MAGIC2       0x4B4D5347       savekmsg                 ``arch/*/amiga/config.c``
+CS_STATE_MAGIC        0x4c4f4749       cs_state                 ``sound/oss/cs46xx.c``
+SLAB_C_MAGIC          0x4f17a36d       kmem_cache               ``mm/slab.c``
+COW_MAGIC             0x4f4f4f4d       cow_header_v1            ``arch/um/drivers/ubd_user.c``
+I810_CARD_MAGIC       0x5072696E       i810_card                ``sound/oss/i810_audio.c``
+TRIDENT_CARD_MAGIC    0x5072696E       trident_card             ``sound/oss/trident.c``
+ROUTER_MAGIC          0x524d4157       wan_device               [in ``wanrouter.h`` pre 3.9]
+SAVEKMSG_MAGIC1       0x53415645       savekmsg                 ``arch/*/amiga/config.c``
+GDA_MAGIC             0x58464552       gda                      ``arch/mips/include/asm/sn/gda.h``
+RED_MAGIC1            0x5a2cf071       (any)                    ``mm/slab.c``
+EEPROM_MAGIC_VALUE    0x5ab478d2       lanai_dev                ``drivers/atm/lanai.c``
+HDLCDRV_MAGIC         0x5ac6e778       hdlcdrv_state            ``include/linux/hdlcdrv.h``
+PCXX_MAGIC            0x5c6df104       channel                  ``drivers/char/pcxx.h``
+KV_MAGIC              0x5f4b565f       kernel_vars_s            ``arch/mips/include/asm/sn/klkernvars.h``
+I810_STATE_MAGIC      0x63657373       i810_state               ``sound/oss/i810_audio.c``
+TRIDENT_STATE_MAGIC   0x63657373       trient_state             ``sound/oss/trident.c``
+M3_CARD_MAGIC         0x646e6f50       m3_card                  ``sound/oss/maestro3.c``
+FW_HEADER_MAGIC       0x65726F66       fw_header                ``drivers/atm/fore200e.h``
+SLOT_MAGIC            0x67267321       slot                     ``drivers/hotplug/cpqphp.h``
+SLOT_MAGIC            0x67267322       slot                     ``drivers/hotplug/acpiphp.h``
+LO_MAGIC              0x68797548       nbd_device               ``include/linux/nbd.h``
+OPROFILE_MAGIC        0x6f70726f       super_block              ``drivers/oprofile/oprofilefs.h``
+M3_STATE_MAGIC        0x734d724d       m3_state                 ``sound/oss/maestro3.c``
+VMALLOC_MAGIC         0x87654320       snd_alloc_track          ``sound/core/memory.c``
+KMALLOC_MAGIC         0x87654321       snd_alloc_track          ``sound/core/memory.c``
+PWC_MAGIC             0x89DC10AB       pwc_device               ``drivers/usb/media/pwc.h``
+NBD_REPLY_MAGIC       0x96744668       nbd_reply                ``include/linux/nbd.h``
+ENI155_MAGIC          0xa54b872d       midway_eprom	        ``drivers/atm/eni.h``
+CODA_MAGIC            0xC0DAC0DA       coda_file_info           ``fs/coda/coda_fs_i.h``
+DPMEM_MAGIC           0xc0ffee11       gdt_pci_sram             ``drivers/scsi/gdth.h``
+YAM_MAGIC             0xF10A7654       yam_port                 ``drivers/net/hamradio/yam.c``
+CCB_MAGIC             0xf2691ad2       ccb                      ``drivers/scsi/ncr53c8xx.c``
+QUEUE_MAGIC_FREE      0xf7e1c9a3       queue_entry              ``drivers/scsi/arm/queue.c``
+QUEUE_MAGIC_USED      0xf7e1cc33       queue_entry              ``drivers/scsi/arm/queue.c``
+HTB_CMAGIC            0xFEFAFEF1       htb_class                ``net/sched/sch_htb.c``
+NMI_MAGIC             0x48414d4d455201 nmi_s                    ``arch/mips/include/asm/sn/nmi.h``
+===================== ================ ======================== ==========================================
+
+Note that there are also defined special per-driver magic numbers in sound
+memory management. See ``include/sound/sndmagic.h`` for complete list of them. Many
+OSS sound drivers have their magic numbers constructed from the soundcard PCI
+ID - these are not listed here as well.
+
+HFS is another larger user of magic numbers - you can find them in
+``fs/hfs/hfs.h``.
diff --git a/Documentation/process/maintainer-pgp-guide.rst b/Documentation/process/maintainer-pgp-guide.rst
new file mode 100644
index 000000000..8f8f1fee9
--- /dev/null
+++ b/Documentation/process/maintainer-pgp-guide.rst
@@ -0,0 +1,967 @@
+.. _pgpguide:
+
+===========================
+Kernel Maintainer PGP guide
+===========================
+
+:Author: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
+
+This document is aimed at Linux kernel developers, and especially at
+subsystem maintainers. It contains a subset of information discussed in
+the more general "`Protecting Code Integrity`_" guide published by the
+Linux Foundation. Please read that document for more in-depth discussion
+on some of the topics mentioned in this guide.
+
+.. _`Protecting Code Integrity`: https://github.com/lfit/itpol/blob/master/protecting-code-integrity.md
+
+The role of PGP in Linux Kernel development
+===========================================
+
+PGP helps ensure the integrity of the code that is produced by the Linux
+kernel development community and, to a lesser degree, establish trusted
+communication channels between developers via PGP-signed email exchange.
+
+The Linux kernel source code is available in two main formats:
+
+- Distributed source repositories (git)
+- Periodic release snapshots (tarballs)
+
+Both git repositories and tarballs carry PGP signatures of the kernel
+developers who create official kernel releases. These signatures offer a
+cryptographic guarantee that downloadable versions made available via
+kernel.org or any other mirrors are identical to what these developers
+have on their workstations. To this end:
+
+- git repositories provide PGP signatures on all tags
+- tarballs provide detached PGP signatures with all downloads
+
+.. _devs_not_infra:
+
+Trusting the developers, not infrastructure
+-------------------------------------------
+
+Ever since the 2011 compromise of core kernel.org systems, the main
+operating principle of the Kernel Archives project has been to assume
+that any part of the infrastructure can be compromised at any time. For
+this reason, the administrators have taken deliberate steps to emphasize
+that trust must always be placed with developers and never with the code
+hosting infrastructure, regardless of how good the security practices
+for the latter may be.
+
+The above guiding principle is the reason why this guide is needed. We
+want to make sure that by placing trust into developers we do not simply
+shift the blame for potential future security incidents to someone else.
+The goal is to provide a set of guidelines developers can use to create
+a secure working environment and safeguard the PGP keys used to
+establish the integrity of the Linux kernel itself.
+
+.. _pgp_tools:
+
+PGP tools
+=========
+
+Use GnuPG v2
+------------
+
+Your distro should already have GnuPG installed by default, you just
+need to verify that you are using version 2.x and not the legacy 1.4
+release -- many distributions still package both, with the default
+``gpg`` command invoking GnuPG v.1. To check, run::
+
+    $ gpg --version | head -n1
+
+If you see ``gpg (GnuPG) 1.4.x``, then you are using GnuPG v.1. Try the
+``gpg2`` command (if you don't have it, you may need to install the
+gnupg2 package)::
+
+    $ gpg2 --version | head -n1
+
+If you see ``gpg (GnuPG) 2.x.x``, then you are good to go. This guide
+will assume you have the version 2.2 of GnuPG (or later). If you are
+using version 2.0 of GnuPG, then some of the commands in this guide will
+not work, and you should consider installing the latest 2.2 version of
+GnuPG. Versions of gnupg-2.1.11 and later should be compatible for the
+purposes of this guide as well.
+
+If you have both ``gpg`` and ``gpg2`` commands, you should make sure you
+are always using GnuPG v2, not the legacy version. You can enforce this
+by setting the appropriate alias::
+
+    $ alias gpg=gpg2
+
+You can put that in your ``.bashrc`` to make sure it's always the case.
+
+Configure gpg-agent options
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The GnuPG agent is a helper tool that will start automatically whenever
+you use the ``gpg`` command and run in the background with the purpose
+of caching the private key passphrase. There are two options you should
+know in order to tweak when the passphrase should be expired from cache:
+
+- ``default-cache-ttl`` (seconds): If you use the same key again before
+  the time-to-live expires, the countdown will reset for another period.
+  The default is 600 (10 minutes).
+- ``max-cache-ttl`` (seconds): Regardless of how recently you've used
+  the key since initial passphrase entry, if the maximum time-to-live
+  countdown expires, you'll have to enter the passphrase again. The
+  default is 30 minutes.
+
+If you find either of these defaults too short (or too long), you can
+edit your ``~/.gnupg/gpg-agent.conf`` file to set your own values::
+
+    # set to 30 minutes for regular ttl, and 2 hours for max ttl
+    default-cache-ttl 1800
+    max-cache-ttl 7200
+
+.. note::
+
+    It is no longer necessary to start gpg-agent manually at the
+    beginning of your shell session. You may want to check your rc files
+    to remove anything you had in place for older versions of GnuPG, as
+    it may not be doing the right thing any more.
+
+Set up a refresh cronjob
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+You will need to regularly refresh your keyring in order to get the
+latest changes on other people's public keys, which is best done with a
+daily cronjob::
+
+    @daily /usr/bin/gpg2 --refresh >/dev/null 2>&1
+
+Check the full path to your ``gpg`` or ``gpg2`` command and use the
+``gpg2`` command if regular ``gpg`` for you is the legacy GnuPG v.1.
+
+.. _master_key:
+
+Protect your master PGP key
+===========================
+
+This guide assumes that you already have a PGP key that you use for Linux
+kernel development purposes. If you do not yet have one, please see the
+"`Protecting Code Integrity`_" document mentioned earlier for guidance
+on how to create a new one.
+
+You should also make a new key if your current one is weaker than 2048 bits
+(RSA).
+
+Master key vs. Subkeys
+----------------------
+
+Subkeys are fully independent PGP keypairs that are tied to the "master"
+key using certifying key signatures (certificates). It is important to
+understand the following:
+
+1. There are no technical differences between the "master key" and "subkeys."
+2. At creation time, we assign functional limitations to each key by
+   giving it specific capabilities.
+3. A PGP key can have 4 capabilities:
+
+   - **[S]** key can be used for signing
+   - **[E]** key can be used for encryption
+   - **[A]** key can be used for authentication
+   - **[C]** key can be used for certifying other keys
+
+4. A single key may have multiple capabilities.
+5. A subkey is fully independent from the master key. A message
+   encrypted to a subkey cannot be decrypted with the master key. If you
+   lose your private subkey, it cannot be recreated from the master key
+   in any way.
+
+The key carrying the **[C]** (certify) capability is considered the
+"master" key because it is the only key that can be used to indicate
+relationship with other keys. Only the **[C]** key can be used to:
+
+- add or revoke other keys (subkeys) with S/E/A capabilities
+- add, change or revoke identities (uids) associated with the key
+- add or change the expiration date on itself or any subkey
+- sign other people's keys for web of trust purposes
+
+By default, GnuPG creates the following when generating new keys:
+
+- A master key carrying both Certify and Sign capabilities (**[SC]**)
+- A separate subkey with the Encryption capability (**[E]**)
+
+If you used the default parameters when generating your key, then that
+is what you will have. You can verify by running ``gpg --list-secret-keys``,
+for example::
+
+    sec   rsa2048 2018-01-23 [SC] [expires: 2020-01-23]
+          000000000000000000000000AAAABBBBCCCCDDDD
+    uid           [ultimate] Alice Dev <adev@kernel.org>
+    ssb   rsa2048 2018-01-23 [E] [expires: 2020-01-23]
+
+Any key carrying the **[C]** capability is your master key, regardless
+of any other capabilities it may have assigned to it.
+
+The long line under the ``sec`` entry is your key fingerprint --
+whenever you see ``[fpr]`` in the examples below, that 40-character
+string is what it refers to.
+
+Ensure your passphrase is strong
+--------------------------------
+
+GnuPG uses passphrases to encrypt your private keys before storing them on
+disk. This way, even if your ``.gnupg`` directory is leaked or stolen in
+its entirety, the attackers cannot use your private keys without first
+obtaining the passphrase to decrypt them.
+
+It is absolutely essential that your private keys are protected by a
+strong passphrase. To set it or change it, use::
+
+    $ gpg --change-passphrase [fpr]
+
+Create a separate Signing subkey
+--------------------------------
+
+Our goal is to protect your master key by moving it to offline media, so
+if you only have a combined **[SC]** key, then you should create a separate
+signing subkey::
+
+    $ gpg --quick-addkey [fpr] ed25519 sign
+
+Remember to tell the keyservers about this change, so others can pull down
+your new subkey::
+
+    $ gpg --send-key [fpr]
+
+.. note:: ECC support in GnuPG
+
+    GnuPG 2.1 and later has full support for Elliptic Curve
+    Cryptography, with ability to combine ECC subkeys with traditional
+    RSA master keys. The main upside of ECC cryptography is that it is
+    much faster computationally and creates much smaller signatures when
+    compared byte for byte with 2048+ bit RSA keys. Unless you plan on
+    using a smartcard device that does not support ECC operations, we
+    recommend that you create an ECC signing subkey for your kernel
+    work.
+
+    If for some reason you prefer to stay with RSA subkeys, just replace
+    "ed25519" with "rsa2048" in the above command. Additionally, if you
+    plan to use a hardware device that does not support ED25519 ECC
+    keys, like Nitrokey Pro or a Yubikey, then you should use
+    "nistp256" instead or "ed25519."
+
+
+Back up your master key for disaster recovery
+---------------------------------------------
+
+The more signatures you have on your PGP key from other developers, the
+more reasons you have to create a backup version that lives on something
+other than digital media, for disaster recovery reasons.
+
+The best way to create a printable hardcopy of your private key is by
+using the ``paperkey`` software written for this very purpose. See ``man
+paperkey`` for more details on the output format and its benefits over
+other solutions. Paperkey should already be packaged for most
+distributions.
+
+Run the following command to create a hardcopy backup of your private
+key::
+
+    $ gpg --export-secret-key [fpr] | paperkey -o /tmp/key-backup.txt
+
+Print out that file (or pipe the output straight to lpr), then take a
+pen and write your passphrase on the margin of the paper. **This is
+strongly recommended** because the key printout is still encrypted with
+that passphrase, and if you ever change it you will not remember what it
+used to be when you had created the backup -- *guaranteed*.
+
+Put the resulting printout and the hand-written passphrase into an envelope
+and store in a secure and well-protected place, preferably away from your
+home, such as your bank vault.
+
+.. note::
+
+    Your printer is probably no longer a simple dumb device connected to
+    your parallel port, but since the output is still encrypted with
+    your passphrase, printing out even to "cloud-integrated" modern
+    printers should remain a relatively safe operation. One option is to
+    change the passphrase on your master key immediately after you are
+    done with paperkey.
+
+Back up your whole GnuPG directory
+----------------------------------
+
+.. warning::
+
+    **!!!Do not skip this step!!!**
+
+It is important to have a readily available backup of your PGP keys
+should you need to recover them. This is different from the
+disaster-level preparedness we did with ``paperkey``. You will also rely
+on these external copies whenever you need to use your Certify key --
+such as when making changes to your own key or signing other people's
+keys after conferences and summits.
+
+Start by getting a small USB "thumb" drive (preferably two!) that you
+will use for backup purposes. You will need to encrypt them using LUKS
+-- refer to your distro's documentation on how to accomplish this.
+
+For the encryption passphrase, you can use the same one as on your
+master key.
+
+Once the encryption process is over, re-insert the USB drive and make
+sure it gets properly mounted. Copy your entire ``.gnupg`` directory
+over to the encrypted storage::
+
+    $ cp -a ~/.gnupg /media/disk/foo/gnupg-backup
+
+You should now test to make sure everything still works::
+
+    $ gpg --homedir=/media/disk/foo/gnupg-backup --list-key [fpr]
+
+If you don't get any errors, then you should be good to go. Unmount the
+USB drive, distinctly label it so you don't blow it away next time you
+need to use a random USB drive, and put in a safe place -- but not too
+far away, because you'll need to use it every now and again for things
+like editing identities, adding or revoking subkeys, or signing other
+people's keys.
+
+Remove the master key from  your homedir
+----------------------------------------
+
+The files in our home directory are not as well protected as we like to
+think.  They can be leaked or stolen via many different means:
+
+- by accident when making quick homedir copies to set up a new workstation
+- by systems administrator negligence or malice
+- via poorly secured backups
+- via malware in desktop apps (browsers, pdf viewers, etc)
+- via coercion when crossing international borders
+
+Protecting your key with a good passphrase greatly helps reduce the risk
+of any of the above, but passphrases can be discovered via keyloggers,
+shoulder-surfing, or any number of other means. For this reason, the
+recommended setup is to remove your master key from your home directory
+and store it on offline storage.
+
+.. warning::
+
+    Please see the previous section and make sure you have backed up
+    your GnuPG directory in its entirety. What we are about to do will
+    render your key useless if you do not have a usable backup!
+
+First, identify the keygrip of your master key::
+
+    $ gpg --with-keygrip --list-key [fpr]
+
+The output will be something like this::
+
+    pub   rsa2048 2018-01-24 [SC] [expires: 2020-01-24]
+          000000000000000000000000AAAABBBBCCCCDDDD
+          Keygrip = 1111000000000000000000000000000000000000
+    uid           [ultimate] Alice Dev <adev@kernel.org>
+    sub   rsa2048 2018-01-24 [E] [expires: 2020-01-24]
+          Keygrip = 2222000000000000000000000000000000000000
+    sub   ed25519 2018-01-24 [S]
+          Keygrip = 3333000000000000000000000000000000000000
+
+Find the keygrip entry that is beneath the ``pub`` line (right under the
+master key fingerprint). This will correspond directly to a file in your
+``~/.gnupg`` directory::
+
+    $ cd ~/.gnupg/private-keys-v1.d
+    $ ls
+    1111000000000000000000000000000000000000.key
+    2222000000000000000000000000000000000000.key
+    3333000000000000000000000000000000000000.key
+
+All you have to do is simply remove the .key file that corresponds to
+the master keygrip::
+
+    $ cd ~/.gnupg/private-keys-v1.d
+    $ rm 1111000000000000000000000000000000000000.key
+
+Now, if you issue the ``--list-secret-keys`` command, it will show that
+the master key is missing (the ``#`` indicates it is not available)::
+
+    $ gpg --list-secret-keys
+    sec#  rsa2048 2018-01-24 [SC] [expires: 2020-01-24]
+          000000000000000000000000AAAABBBBCCCCDDDD
+    uid           [ultimate] Alice Dev <adev@kernel.org>
+    ssb   rsa2048 2018-01-24 [E] [expires: 2020-01-24]
+    ssb   ed25519 2018-01-24 [S]
+
+You should also remove any ``secring.gpg`` files in the ``~/.gnupg``
+directory, which are left over from earlier versions of GnuPG.
+
+If you don't have the "private-keys-v1.d" directory
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you do not have a ``~/.gnupg/private-keys-v1.d`` directory, then your
+secret keys are still stored in the legacy ``secring.gpg`` file used by
+GnuPG v1. Making any changes to your key, such as changing the
+passphrase or adding a subkey, should automatically convert the old
+``secring.gpg`` format to use ``private-keys-v1.d`` instead.
+
+Once you get that done, make sure to delete the obsolete ``secring.gpg``
+file, which still contains your private keys.
+
+.. _smartcards:
+
+Move the subkeys to a dedicated crypto device
+=============================================
+
+Even though the master key is now safe from being leaked or stolen, the
+subkeys are still in your home directory. Anyone who manages to get
+their hands on those will be able to decrypt your communication or fake
+your signatures (if they know the passphrase). Furthermore, each time a
+GnuPG operation is performed, the keys are loaded into system memory and
+can be stolen from there by sufficiently advanced malware (think
+Meltdown and Spectre).
+
+The best way to completely protect your keys is to move them to a
+specialized hardware device that is capable of smartcard operations.
+
+The benefits of smartcards
+--------------------------
+
+A smartcard contains a cryptographic chip that is capable of storing
+private keys and performing crypto operations directly on the card
+itself. Because the key contents never leave the smartcard, the
+operating system of the computer into which you plug in the hardware
+device is not able to retrieve the private keys themselves. This is very
+different from the encrypted USB storage device we used earlier for
+backup purposes -- while that USB device is plugged in and mounted, the
+operating system is able to access the private key contents.
+
+Using external encrypted USB media is not a substitute to having a
+smartcard-capable device.
+
+Available smartcard devices
+---------------------------
+
+Unless all your laptops and workstations have smartcard readers, the
+easiest is to get a specialized USB device that implements smartcard
+functionality. There are several options available:
+
+- `Nitrokey Start`_: Open hardware and Free Software, based on FSI
+  Japan's `Gnuk`_. One of the few available commercial devices that
+  support ED25519 ECC keys, but offer fewest security features (such as
+  resistance to tampering or some side-channel attacks).
+- `Nitrokey Pro 2`_: Similar to the Nitrokey Start, but more
+  tamper-resistant and offers more security features. Pro 2 supports ECC
+  cryptography (NISTP).
+- `Yubikey 5`_: proprietary hardware and software, but cheaper than
+  Nitrokey Pro and comes available in the USB-C form that is more useful
+  with newer laptops. Offers additional security features such as FIDO
+  U2F, among others, and now finally supports ECC keys (NISTP).
+
+`LWN has a good review`_ of some of the above models, as well as several
+others. Your choice will depend on cost, shipping availability in your
+geographical region, and open/proprietary hardware considerations.
+
+.. note::
+
+    If you are listed in MAINTAINERS or have an account at kernel.org,
+    you `qualify for a free Nitrokey Start`_ courtesy of The Linux
+    Foundation.
+
+.. _`Nitrokey Start`: https://shop.nitrokey.com/shop/product/nitrokey-start-6
+.. _`Nitrokey Pro 2`: https://shop.nitrokey.com/shop/product/nitrokey-pro-2-3
+.. _`Yubikey 5`: https://www.yubico.com/products/yubikey-5-overview/
+.. _Gnuk: https://www.fsij.org/doc-gnuk/
+.. _`LWN has a good review`: https://lwn.net/Articles/736231/
+.. _`qualify for a free Nitrokey Start`: https://www.kernel.org/nitrokey-digital-tokens-for-kernel-developers.html
+
+Configure your smartcard device
+-------------------------------
+
+Your smartcard device should Just Work (TM) the moment you plug it into
+any modern Linux workstation. You can verify it by running::
+
+    $ gpg --card-status
+
+If you see full smartcard details, then you are good to go.
+Unfortunately, troubleshooting all possible reasons why things may not
+be working for you is way beyond the scope of this guide. If you are
+having trouble getting the card to work with GnuPG, please seek help via
+usual support channels.
+
+To configure your smartcard, you will need to use the GnuPG menu system, as
+there are no convenient command-line switches::
+
+    $ gpg --card-edit
+    [...omitted...]
+    gpg/card> admin
+    Admin commands are allowed
+    gpg/card> passwd
+
+You should set the user PIN (1), Admin PIN (3), and the Reset Code (4).
+Please make sure to record and store these in a safe place -- especially
+the Admin PIN and the Reset Code (which allows you to completely wipe
+the smartcard). You so rarely need to use the Admin PIN, that you will
+inevitably forget what it is if you do not record it.
+
+Getting back to the main card menu, you can also set other values (such
+as name, sex, login data, etc), but it's not necessary and will
+additionally leak information about your smartcard should you lose it.
+
+.. note::
+
+    Despite having the name "PIN", neither the user PIN nor the admin
+    PIN on the card need to be numbers.
+
+.. warning::
+
+    Some devices may require that you move the subkeys onto the device
+    before you can change the passphrase. Please check the documentation
+    provided by the device manufacturer.
+
+Move the subkeys to your smartcard
+----------------------------------
+
+Exit the card menu (using "q") and save all changes. Next, let's move
+your subkeys onto the smartcard. You will need both your PGP key
+passphrase and the admin PIN of the card for most operations::
+
+    $ gpg --edit-key [fpr]
+
+    Secret subkeys are available.
+
+    pub  rsa2048/AAAABBBBCCCCDDDD
+         created: 2018-01-23  expires: 2020-01-23  usage: SC
+         trust: ultimate      validity: ultimate
+    ssb  rsa2048/1111222233334444
+         created: 2018-01-23  expires: never       usage: E
+    ssb  ed25519/5555666677778888
+         created: 2017-12-07  expires: never       usage: S
+    [ultimate] (1). Alice Dev <adev@kernel.org>
+
+    gpg>
+
+Using ``--edit-key`` puts us into the menu mode again, and you will
+notice that the key listing is a little different. From here on, all
+commands are done from inside this menu mode, as indicated by ``gpg>``.
+
+First, let's select the key we'll be putting onto the card -- you do
+this by typing ``key 1`` (it's the first one in the listing, the **[E]**
+subkey)::
+
+    gpg> key 1
+
+In the output, you should now see ``ssb*`` on the **[E]** key. The ``*``
+indicates which key is currently "selected." It works as a *toggle*,
+meaning that if you type ``key 1`` again, the ``*`` will disappear and
+the key will not be selected any more.
+
+Now, let's move that key onto the smartcard::
+
+    gpg> keytocard
+    Please select where to store the key:
+       (2) Encryption key
+    Your selection? 2
+
+Since it's our **[E]** key, it makes sense to put it into the Encryption
+slot.  When you submit your selection, you will be prompted first for
+your PGP key passphrase, and then for the admin PIN. If the command
+returns without an error, your key has been moved.
+
+**Important**: Now type ``key 1`` again to unselect the first key, and
+``key 2`` to select the **[S]** key::
+
+    gpg> key 1
+    gpg> key 2
+    gpg> keytocard
+    Please select where to store the key:
+       (1) Signature key
+       (3) Authentication key
+    Your selection? 1
+
+You can use the **[S]** key both for Signature and Authentication, but
+we want to make sure it's in the Signature slot, so choose (1). Once
+again, if your command returns without an error, then the operation was
+successful::
+
+    gpg> q
+    Save changes? (y/N) y
+
+Saving the changes will delete the keys you moved to the card from your
+home directory (but it's okay, because we have them in our backups
+should we need to do this again for a replacement smartcard).
+
+Verifying that the keys were moved
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+If you perform ``--list-secret-keys`` now, you will see a subtle
+difference in the output::
+
+    $ gpg --list-secret-keys
+    sec#  rsa2048 2018-01-24 [SC] [expires: 2020-01-24]
+          000000000000000000000000AAAABBBBCCCCDDDD
+    uid           [ultimate] Alice Dev <adev@kernel.org>
+    ssb>  rsa2048 2018-01-24 [E] [expires: 2020-01-24]
+    ssb>  ed25519 2018-01-24 [S]
+
+The ``>`` in the ``ssb>`` output indicates that the subkey is only
+available on the smartcard. If you go back into your secret keys
+directory and look at the contents there, you will notice that the
+``.key`` files there have been replaced with stubs::
+
+    $ cd ~/.gnupg/private-keys-v1.d
+    $ strings *.key | grep 'private-key'
+
+The output should contain ``shadowed-private-key`` to indicate that
+these files are only stubs and the actual content is on the smartcard.
+
+Verifying that the smartcard is functioning
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To verify that the smartcard is working as intended, you can create a
+signature::
+
+    $ echo "Hello world" | gpg --clearsign > /tmp/test.asc
+    $ gpg --verify /tmp/test.asc
+
+This should ask for your smartcard PIN on your first command, and then
+show "Good signature" after you run ``gpg --verify``.
+
+Congratulations, you have successfully made it extremely difficult to
+steal your digital developer identity!
+
+Other common GnuPG operations
+-----------------------------
+
+Here is a quick reference for some common operations you'll need to do
+with your PGP key.
+
+Mounting your master key offline storage
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+You will need your master key for any of the operations below, so you
+will first need to mount your backup offline storage and tell GnuPG to
+use it::
+
+    $ export GNUPGHOME=/media/disk/foo/gnupg-backup
+    $ gpg --list-secret-keys
+
+You want to make sure that you see ``sec`` and not ``sec#`` in the
+output (the ``#`` means the key is not available and you're still using
+your regular home directory location).
+
+Extending key expiration date
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The master key has the default expiration date of 2 years from the date
+of creation. This is done both for security reasons and to make obsolete
+keys eventually disappear from keyservers.
+
+To extend the expiration on your key by a year from current date, just
+run::
+
+    $ gpg --quick-set-expire [fpr] 1y
+
+You can also use a specific date if that is easier to remember (e.g.
+your birthday, January 1st, or Canada Day)::
+
+    $ gpg --quick-set-expire [fpr] 2020-07-01
+
+Remember to send the updated key back to keyservers::
+
+    $ gpg --send-key [fpr]
+
+Updating your work directory after any changes
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+After you make any changes to your key using the offline storage, you will
+want to import these changes back into your regular working directory::
+
+    $ gpg --export | gpg --homedir ~/.gnupg --import
+    $ unset GNUPGHOME
+
+Using gpg-agent over ssh
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+You can forward your gpg-agent over ssh if you need to sign tags or
+commits on a remote system. Please refer to the instructions provided
+on the GnuPG wiki:
+
+- `Agent Forwarding over SSH`_
+
+It works more smoothly if you can modify the sshd server settings on the
+remote end.
+
+.. _`Agent Forwarding over SSH`: https://wiki.gnupg.org/AgentForwarding
+
+
+Using PGP with Git
+==================
+
+One of the core features of Git is its decentralized nature -- once a
+repository is cloned to your system, you have full history of the
+project, including all of its tags, commits and branches. However, with
+hundreds of cloned repositories floating around, how does anyone verify
+that their copy of linux.git has not been tampered with by a malicious
+third party?
+
+Or what happens if a backdoor is discovered in the code and the "Author"
+line in the commit says it was done by you, while you're pretty sure you
+had `nothing to do with it`_?
+
+To address both of these issues, Git introduced PGP integration. Signed
+tags prove the repository integrity by assuring that its contents are
+exactly the same as on the workstation of the developer who created the
+tag, while signed commits make it nearly impossible for someone to
+impersonate you without having access to your PGP keys.
+
+.. _`nothing to do with it`: https://github.com/jayphelps/git-blame-someone-else
+
+Configure git to use your PGP key
+---------------------------------
+
+If you only have one secret key in your keyring, then you don't really
+need to do anything extra, as it becomes your default key.  However, if
+you happen to have multiple secret keys, you can tell git which key
+should be used (``[fpr]`` is the fingerprint of your key)::
+
+    $ git config --global user.signingKey [fpr]
+
+**IMPORTANT**: If you have a distinct ``gpg2`` command, then you should
+tell git to always use it instead of the legacy ``gpg`` from version 1::
+
+    $ git config --global gpg.program gpg2
+    $ git config --global gpgv.program gpgv2
+
+How to work with signed tags
+----------------------------
+
+To create a signed tag, simply pass the ``-s`` switch to the tag
+command::
+
+    $ git tag -s [tagname]
+
+Our recommendation is to always sign git tags, as this allows other
+developers to ensure that the git repository they are pulling from has
+not been maliciously altered.
+
+How to verify signed tags
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To verify a signed tag, simply use the ``verify-tag`` command::
+
+    $ git verify-tag [tagname]
+
+If you are pulling a tag from another fork of the project repository,
+git should automatically verify the signature at the tip you're pulling
+and show you the results during the merge operation::
+
+    $ git pull [url] tags/sometag
+
+The merge message will contain something like this::
+
+    Merge tag 'sometag' of [url]
+
+    [Tag message]
+
+    # gpg: Signature made [...]
+    # gpg: Good signature from [...]
+
+If you are verifying someone else's git tag, then you will need to
+import their PGP key. Please refer to the
+":ref:`verify_identities`" section below.
+
+.. note::
+
+    If you get "``gpg: Can't check signature: unknown pubkey
+    algorithm``" error, you need to tell git to use gpgv2 for
+    verification, so it properly processes signatures made by ECC keys.
+    See instructions at the start of this section.
+
+Configure git to always sign annotated tags
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Chances are, if you're creating an annotated tag, you'll want to sign
+it. To force git to always sign annotated tags, you can set a global
+configuration option::
+
+    $ git config --global tag.forceSignAnnotated true
+
+How to work with signed commits
+-------------------------------
+
+It is easy to create signed commits, but it is much more difficult to
+use them in Linux kernel development, since it relies on patches sent to
+the mailing list, and this workflow does not preserve PGP commit
+signatures. Furthermore, when rebasing your repository to match
+upstream, even your own PGP commit signatures will end up discarded. For
+this reason, most kernel developers don't bother signing their commits
+and will ignore signed commits in any external repositories that they
+rely upon in their work.
+
+However, if you have your working git tree publicly available at some
+git hosting service (kernel.org, infradead.org, ozlabs.org, or others),
+then the recommendation is that you sign all your git commits even if
+upstream developers do not directly benefit from this practice.
+
+We recommend this for the following reasons:
+
+1. Should there ever be a need to perform code forensics or track code
+   provenance, even externally maintained trees carrying PGP commit
+   signatures will be valuable for such purposes.
+2. If you ever need to re-clone your local repository (for example,
+   after a disk failure), this lets you easily verify the repository
+   integrity before resuming your work.
+3. If someone needs to cherry-pick your commits, this allows them to
+   quickly verify their integrity before applying them.
+
+Creating signed commits
+~~~~~~~~~~~~~~~~~~~~~~~
+
+To create a signed commit, you just need to pass the ``-S`` flag to the
+``git commit`` command (it's capital ``-S`` due to collision with
+another flag)::
+
+    $ git commit -S
+
+Configure git to always sign commits
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+You can tell git to always sign commits::
+
+    git config --global commit.gpgSign true
+
+.. note::
+
+    Make sure you configure ``gpg-agent`` before you turn this on.
+
+.. _verify_identities:
+
+How to verify kernel developer identities
+=========================================
+
+Signing tags and commits is easy, but how does one go about verifying
+that the key used to sign something belongs to the actual kernel
+developer and not to a malicious imposter?
+
+Configure auto-key-retrieval using WKD and DANE
+-----------------------------------------------
+
+If you are not already someone with an extensive collection of other
+developers' public keys, then you can jumpstart your keyring by relying
+on key auto-discovery and auto-retrieval. GnuPG can piggyback on other
+delegated trust technologies, namely DNSSEC and TLS, to get you going if
+the prospect of starting your own Web of Trust from scratch is too
+daunting.
+
+Add the following to your ``~/.gnupg/gpg.conf``::
+
+    auto-key-locate wkd,dane,local
+    auto-key-retrieve
+
+DNS-Based Authentication of Named Entities ("DANE") is a method for
+publishing public keys in DNS and securing them using DNSSEC signed
+zones. Web Key Directory ("WKD") is the alternative method that uses
+https lookups for the same purpose. When using either DANE or WKD for
+looking up public keys, GnuPG will validate DNSSEC or TLS certificates,
+respectively, before adding auto-retrieved public keys to your local
+keyring.
+
+Kernel.org publishes the WKD for all developers who have kernel.org
+accounts. Once you have the above changes in your ``gpg.conf``, you can
+auto-retrieve the keys for Linus Torvalds and Greg Kroah-Hartman (if you
+don't already have them)::
+
+    $ gpg --locate-keys torvalds@kernel.org gregkh@kernel.org
+
+If you have a kernel.org account, then you should `add the kernel.org
+UID to your key`_ to make WKD more useful to other kernel developers.
+
+.. _`add the kernel.org UID to your key`: https://korg.wiki.kernel.org/userdoc/mail#adding_a_kernelorg_uid_to_your_pgp_key
+
+Web of Trust (WOT) vs. Trust on First Use (TOFU)
+------------------------------------------------
+
+PGP incorporates a trust delegation mechanism known as the "Web of
+Trust." At its core, this is an attempt to replace the need for
+centralized Certification Authorities of the HTTPS/TLS world. Instead of
+various software makers dictating who should be your trusted certifying
+entity, PGP leaves this responsibility to each user.
+
+Unfortunately, very few people understand how the Web of Trust works.
+While it remains an important aspect of the OpenPGP specification,
+recent versions of GnuPG (2.2 and above) have implemented an alternative
+mechanism called "Trust on First Use" (TOFU). You can think of TOFU as
+"the SSH-like approach to trust." With SSH, the first time you connect
+to a remote system, its key fingerprint is recorded and remembered. If
+the key changes in the future, the SSH client will alert you and refuse
+to connect, forcing you to make a decision on whether you choose to
+trust the changed key or not. Similarly, the first time you import
+someone's PGP key, it is assumed to be valid. If at any point in the
+future GnuPG comes across another key with the same identity, both the
+previously imported key and the new key will be marked as invalid and
+you will need to manually figure out which one to keep.
+
+We recommend that you use the combined TOFU+PGP trust model (which is
+the new default in GnuPG v2). To set it, add (or modify) the
+``trust-model`` setting in ``~/.gnupg/gpg.conf``::
+
+    trust-model tofu+pgp
+
+How to use keyservers (more) safely
+-----------------------------------
+
+If you get a "No public key" error when trying to validate someone's
+tag, then you should attempt to lookup that key using a keyserver. It is
+important to keep in mind that there is absolutely no guarantee that the
+key you retrieve from PGP keyservers belongs to the actual person --
+that much is by design. You are supposed to use the Web of Trust to
+establish key validity.
+
+How to properly maintain the Web of Trust is beyond the scope of this
+document, simply because doing it properly requires both effort and
+dedication that tends to be beyond the caring threshold of most human
+beings. Here are some shortcuts that will help you reduce the risk of
+importing a malicious key.
+
+First, let's say you've tried to run ``git verify-tag`` but it returned
+an error saying the key is not found::
+
+    $ git verify-tag sunxi-fixes-for-4.15-2
+    gpg: Signature made Sun 07 Jan 2018 10:51:55 PM EST
+    gpg:                using RSA key DA73759BF8619E484E5A3B47389A54219C0F2430
+    gpg:                issuer "wens@...org"
+    gpg: Can't check signature: No public key
+
+Let's query the keyserver for more info about that key fingerprint (the
+fingerprint probably belongs to a subkey, so we can't use it directly
+without finding out the ID of the master key it is associated with)::
+
+    $ gpg --search DA73759BF8619E484E5A3B47389A54219C0F2430
+    gpg: data source: hkp://keys.gnupg.net
+    (1) Chen-Yu Tsai <wens@...org>
+          4096 bit RSA key C94035C21B4F2AEB, created: 2017-03-14, expires: 2019-03-15
+    Keys 1-1 of 1 for "DA73759BF8619E484E5A3B47389A54219C0F2430".  Enter number(s), N)ext, or Q)uit > q
+
+Locate the ID of the master key in the output, in our example
+``C94035C21B4F2AEB``. Now display the key of Linus Torvalds that you
+have on your keyring::
+
+    $ gpg --list-key torvalds@kernel.org
+    pub   rsa2048 2011-09-20 [SC]
+          ABAF11C65A2970B130ABE3C479BE3E4300411886
+    uid           [ unknown] Linus Torvalds <torvalds@kernel.org>
+    sub   rsa2048 2011-09-20 [E]
+
+Next, open the `PGP pathfinder`_. In the "From" field, paste the key
+fingerprint of Linus Torvalds from the output above. In the "To" field,
+paste the key-id you found via ``gpg --search`` of the unknown key, and
+check the results:
+
+- `Finding paths to Linus`_
+
+If you get a few decent trust paths, then it's a pretty good indication
+that it is a valid key. You can add it to your keyring from the
+keyserver now::
+
+    $ gpg --recv-key C94035C21B4F2AEB
+
+This process is not perfect, and you are obviously trusting the
+administrators of the PGP Pathfinder service to not be malicious (in
+fact, this goes against :ref:`devs_not_infra`). However, if you
+do not carefully maintain your own web of trust, then it is a marked
+improvement over blindly trusting keyservers.
+
+.. _`PGP pathfinder`: https://pgp.cs.uu.nl/
+.. _`Finding paths to Linus`: https://pgp.cs.uu.nl/paths/79BE3E4300411886/to/C94035C21B4F2AEB.html
diff --git a/Documentation/process/maintainers.rst b/Documentation/process/maintainers.rst
new file mode 100644
index 000000000..6174cfb41
--- /dev/null
+++ b/Documentation/process/maintainers.rst
@@ -0,0 +1 @@
+.. maintainers-include::
diff --git a/Documentation/process/management-style.rst b/Documentation/process/management-style.rst
new file mode 100644
index 000000000..dfbc69bf4
--- /dev/null
+++ b/Documentation/process/management-style.rst
@@ -0,0 +1,290 @@
+.. _managementstyle:
+
+Linux kernel management style
+=============================
+
+This is a short document describing the preferred (or made up, depending
+on who you ask) management style for the linux kernel.  It's meant to
+mirror the :ref:`process/coding-style.rst <codingstyle>` document to some
+degree, and mainly written to avoid answering [#f1]_  the same (or similar)
+questions over and over again.
+
+Management style is very personal and much harder to quantify than
+simple coding style rules, so this document may or may not have anything
+to do with reality.  It started as a lark, but that doesn't mean that it
+might not actually be true. You'll have to decide for yourself.
+
+Btw, when talking about "kernel manager", it's all about the technical
+lead persons, not the people who do traditional management inside
+companies.  If you sign purchase orders or you have any clue about the
+budget of your group, you're almost certainly not a kernel manager.
+These suggestions may or may not apply to you.
+
+First off, I'd suggest buying "Seven Habits of Highly Effective
+People", and NOT read it.  Burn it, it's a great symbolic gesture.
+
+.. [#f1] This document does so not so much by answering the question, but by
+  making it painfully obvious to the questioner that we don't have a clue
+  to what the answer is.
+
+Anyway, here goes:
+
+.. _decisions:
+
+1) Decisions
+------------
+
+Everybody thinks managers make decisions, and that decision-making is
+important.  The bigger and more painful the decision, the bigger the
+manager must be to make it.  That's very deep and obvious, but it's not
+actually true.
+
+The name of the game is to **avoid** having to make a decision.  In
+particular, if somebody tells you "choose (a) or (b), we really need you
+to decide on this", you're in trouble as a manager.  The people you
+manage had better know the details better than you, so if they come to
+you for a technical decision, you're screwed.  You're clearly not
+competent to make that decision for them.
+
+(Corollary:if the people you manage don't know the details better than
+you, you're also screwed, although for a totally different reason.
+Namely that you are in the wrong job, and that **they** should be managing
+your brilliance instead).
+
+So the name of the game is to **avoid** decisions, at least the big and
+painful ones.  Making small and non-consequential decisions is fine, and
+makes you look like you know what you're doing, so what a kernel manager
+needs to do is to turn the big and painful ones into small things where
+nobody really cares.
+
+It helps to realize that the key difference between a big decision and a
+small one is whether you can fix your decision afterwards.  Any decision
+can be made small by just always making sure that if you were wrong (and
+you **will** be wrong), you can always undo the damage later by
+backtracking.  Suddenly, you get to be doubly managerial for making
+**two** inconsequential decisions - the wrong one **and** the right one.
+
+And people will even see that as true leadership (*cough* bullshit
+*cough*).
+
+Thus the key to avoiding big decisions becomes to just avoiding to do
+things that can't be undone.  Don't get ushered into a corner from which
+you cannot escape.  A cornered rat may be dangerous - a cornered manager
+is just pitiful.
+
+It turns out that since nobody would be stupid enough to ever really let
+a kernel manager have huge fiscal responsibility **anyway**, it's usually
+fairly easy to backtrack.  Since you're not going to be able to waste
+huge amounts of money that you might not be able to repay, the only
+thing you can backtrack on is a technical decision, and there
+back-tracking is very easy: just tell everybody that you were an
+incompetent nincompoop, say you're sorry, and undo all the worthless
+work you had people work on for the last year.  Suddenly the decision
+you made a year ago wasn't a big decision after all, since it could be
+easily undone.
+
+It turns out that some people have trouble with this approach, for two
+reasons:
+
+ - admitting you were an idiot is harder than it looks.  We all like to
+   maintain appearances, and coming out in public to say that you were
+   wrong is sometimes very hard indeed.
+ - having somebody tell you that what you worked on for the last year
+   wasn't worthwhile after all can be hard on the poor lowly engineers
+   too, and while the actual **work** was easy enough to undo by just
+   deleting it, you may have irrevocably lost the trust of that
+   engineer.  And remember: "irrevocable" was what we tried to avoid in
+   the first place, and your decision ended up being a big one after
+   all.
+
+Happily, both of these reasons can be mitigated effectively by just
+admitting up-front that you don't have a friggin' clue, and telling
+people ahead of the fact that your decision is purely preliminary, and
+might be the wrong thing.  You should always reserve the right to change
+your mind, and make people very **aware** of that.  And it's much easier
+to admit that you are stupid when you haven't **yet** done the really
+stupid thing.
+
+Then, when it really does turn out to be stupid, people just roll their
+eyes and say "Oops, not again".
+
+This preemptive admission of incompetence might also make the people who
+actually do the work also think twice about whether it's worth doing or
+not.  After all, if **they** aren't certain whether it's a good idea, you
+sure as hell shouldn't encourage them by promising them that what they
+work on will be included.  Make them at least think twice before they
+embark on a big endeavor.
+
+Remember: they'd better know more about the details than you do, and
+they usually already think they have the answer to everything.  The best
+thing you can do as a manager is not to instill confidence, but rather a
+healthy dose of critical thinking on what they do.
+
+Btw, another way to avoid a decision is to plaintively just whine "can't
+we just do both?" and look pitiful.  Trust me, it works.  If it's not
+clear which approach is better, they'll eventually figure it out.  The
+answer may end up being that both teams get so frustrated by the
+situation that they just give up.
+
+That may sound like a failure, but it's usually a sign that there was
+something wrong with both projects, and the reason the people involved
+couldn't decide was that they were both wrong.  You end up coming up
+smelling like roses, and you avoided yet another decision that you could
+have screwed up on.
+
+
+2) People
+---------
+
+Most people are idiots, and being a manager means you'll have to deal
+with it, and perhaps more importantly, that **they** have to deal with
+**you**.
+
+It turns out that while it's easy to undo technical mistakes, it's not
+as easy to undo personality disorders.  You just have to live with
+theirs - and yours.
+
+However, in order to prepare yourself as a kernel manager, it's best to
+remember not to burn any bridges, bomb any innocent villagers, or
+alienate too many kernel developers. It turns out that alienating people
+is fairly easy, and un-alienating them is hard. Thus "alienating"
+immediately falls under the heading of "not reversible", and becomes a
+no-no according to :ref:`decisions`.
+
+There's just a few simple rules here:
+
+ (1) don't call people d*ckheads (at least not in public)
+ (2) learn how to apologize when you forgot rule (1)
+
+The problem with #1 is that it's very easy to do, since you can say
+"you're a d*ckhead" in millions of different ways [#f2]_, sometimes without
+even realizing it, and almost always with a white-hot conviction that
+you are right.
+
+And the more convinced you are that you are right (and let's face it,
+you can call just about **anybody** a d*ckhead, and you often **will** be
+right), the harder it ends up being to apologize afterwards.
+
+To solve this problem, you really only have two options:
+
+ - get really good at apologies
+ - spread the "love" out so evenly that nobody really ends up feeling
+   like they get unfairly targeted.  Make it inventive enough, and they
+   might even be amused.
+
+The option of being unfailingly polite really doesn't exist. Nobody will
+trust somebody who is so clearly hiding their true character.
+
+.. [#f2] Paul Simon sang "Fifty Ways to Leave Your Lover", because quite
+  frankly, "A Million Ways to Tell a Developer They're a D*ckhead" doesn't
+  scan nearly as well.  But I'm sure he thought about it.
+
+
+3) People II - the Good Kind
+----------------------------
+
+While it turns out that most people are idiots, the corollary to that is
+sadly that you are one too, and that while we can all bask in the secure
+knowledge that we're better than the average person (let's face it,
+nobody ever believes that they're average or below-average), we should
+also admit that we're not the sharpest knife around, and there will be
+other people that are less of an idiot than you are.
+
+Some people react badly to smart people.  Others take advantage of them.
+
+Make sure that you, as a kernel maintainer, are in the second group.
+Suck up to them, because they are the people who will make your job
+easier. In particular, they'll be able to make your decisions for you,
+which is what the game is all about.
+
+So when you find somebody smarter than you are, just coast along.  Your
+management responsibilities largely become ones of saying "Sounds like a
+good idea - go wild", or "That sounds good, but what about xxx?".  The
+second version in particular is a great way to either learn something
+new about "xxx" or seem **extra** managerial by pointing out something the
+smarter person hadn't thought about.  In either case, you win.
+
+One thing to look out for is to realize that greatness in one area does
+not necessarily translate to other areas.  So you might prod people in
+specific directions, but let's face it, they might be good at what they
+do, and suck at everything else.  The good news is that people tend to
+naturally gravitate back to what they are good at, so it's not like you
+are doing something irreversible when you **do** prod them in some
+direction, just don't push too hard.
+
+
+4) Placing blame
+----------------
+
+Things will go wrong, and people want somebody to blame. Tag, you're it.
+
+It's not actually that hard to accept the blame, especially if people
+kind of realize that it wasn't **all** your fault.  Which brings us to the
+best way of taking the blame: do it for someone else. You'll feel good
+for taking the fall, they'll feel good about not getting blamed, and the
+person who lost their whole 36GB porn-collection because of your
+incompetence will grudgingly admit that you at least didn't try to weasel
+out of it.
+
+Then make the developer who really screwed up (if you can find them) know
+**in private** that they screwed up.  Not just so they can avoid it in the
+future, but so that they know they owe you one.  And, perhaps even more
+importantly, they're also likely the person who can fix it.  Because, let's
+face it, it sure ain't you.
+
+Taking the blame is also why you get to be manager in the first place.
+It's part of what makes people trust you, and allow you the potential
+glory, because you're the one who gets to say "I screwed up".  And if
+you've followed the previous rules, you'll be pretty good at saying that
+by now.
+
+
+5) Things to avoid
+------------------
+
+There's one thing people hate even more than being called "d*ckhead",
+and that is being called a "d*ckhead" in a sanctimonious voice.  The
+first you can apologize for, the second one you won't really get the
+chance.  They likely will no longer be listening even if you otherwise
+do a good job.
+
+We all think we're better than anybody else, which means that when
+somebody else puts on airs, it **really** rubs us the wrong way.  You may
+be morally and intellectually superior to everybody around you, but
+don't try to make it too obvious unless you really **intend** to irritate
+somebody [#f3]_.
+
+Similarly, don't be too polite or subtle about things. Politeness easily
+ends up going overboard and hiding the problem, and as they say, "On the
+internet, nobody can hear you being subtle". Use a big blunt object to
+hammer the point in, because you can't really depend on people getting
+your point otherwise.
+
+Some humor can help pad both the bluntness and the moralizing.  Going
+overboard to the point of being ridiculous can drive a point home
+without making it painful to the recipient, who just thinks you're being
+silly.  It can thus help get through the personal mental block we all
+have about criticism.
+
+.. [#f3] Hint: internet newsgroups that are not directly related to your work
+  are great ways to take out your frustrations at other people. Write
+  insulting posts with a sneer just to get into a good flame every once in
+  a while, and you'll feel cleansed. Just don't crap too close to home.
+
+
+6) Why me?
+----------
+
+Since your main responsibility seems to be to take the blame for other
+peoples mistakes, and make it painfully obvious to everybody else that
+you're incompetent, the obvious question becomes one of why do it in the
+first place?
+
+First off, while you may or may not get screaming teenage girls (or
+boys, let's not be judgmental or sexist here) knocking on your dressing
+room door, you **will** get an immense feeling of personal accomplishment
+for being "in charge".  Never mind the fact that you're really leading
+by trying to keep up with everybody else and running after them as fast
+as you can.  Everybody will still think you're the person in charge.
+
+It's a great job if you can hack it.
diff --git a/Documentation/process/programming-language.rst b/Documentation/process/programming-language.rst
new file mode 100644
index 000000000..ec474a70a
--- /dev/null
+++ b/Documentation/process/programming-language.rst
@@ -0,0 +1,46 @@
+.. _programming_language:
+
+Programming Language
+====================
+
+The kernel is written in the C programming language [c-language]_.
+More precisely, the kernel is typically compiled with ``gcc`` [gcc]_
+under ``-std=gnu89`` [gcc-c-dialect-options]_: the GNU dialect of ISO C90
+(including some C99 features). ``clang`` [clang]_ is also supported, see
+docs on :ref:`Building Linux with Clang/LLVM <kbuild_llvm>`.
+
+This dialect contains many extensions to the language [gnu-extensions]_,
+and many of them are used within the kernel as a matter of course.
+
+There is some support for compiling the kernel with ``icc`` [icc]_ for several
+of the architectures, although at the time of writing it is not completed,
+requiring third-party patches.
+
+Attributes
+----------
+
+One of the common extensions used throughout the kernel are attributes
+[gcc-attribute-syntax]_. Attributes allow to introduce
+implementation-defined semantics to language entities (like variables,
+functions or types) without having to make significant syntactic changes
+to the language (e.g. adding a new keyword) [n2049]_.
+
+In some cases, attributes are optional (i.e. a compiler not supporting them
+should still produce proper code, even if it is slower or does not perform
+as many compile-time checks/diagnostics).
+
+The kernel defines pseudo-keywords (e.g. ``__pure``) instead of using
+directly the GNU attribute syntax (e.g. ``__attribute__((__pure__))``)
+in order to feature detect which ones can be used and/or to shorten the code.
+
+Please refer to ``include/linux/compiler_attributes.h`` for more information.
+
+.. [c-language] http://www.open-std.org/jtc1/sc22/wg14/www/standards
+.. [gcc] https://gcc.gnu.org
+.. [clang] https://clang.llvm.org
+.. [icc] https://software.intel.com/en-us/c-compilers
+.. [gcc-c-dialect-options] https://gcc.gnu.org/onlinedocs/gcc/C-Dialect-Options.html
+.. [gnu-extensions] https://gcc.gnu.org/onlinedocs/gcc/C-Extensions.html
+.. [gcc-attribute-syntax] https://gcc.gnu.org/onlinedocs/gcc/Attribute-Syntax.html
+.. [n2049] http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2049.pdf
+
diff --git a/Documentation/process/stable-api-nonsense.rst b/Documentation/process/stable-api-nonsense.rst
new file mode 100644
index 000000000..a9625ab1f
--- /dev/null
+++ b/Documentation/process/stable-api-nonsense.rst
@@ -0,0 +1,204 @@
+.. _stable_api_nonsense:
+
+The Linux Kernel Driver Interface
+==================================
+
+(all of your questions answered and then some)
+
+Greg Kroah-Hartman <greg@kroah.com>
+
+This is being written to try to explain why Linux **does not have a binary
+kernel interface, nor does it have a stable kernel interface**.
+
+.. note::
+
+  Please realize that this article describes the **in kernel** interfaces, not
+  the kernel to userspace interfaces.
+
+  The kernel to userspace interface is the one that application programs use,
+  the syscall interface.  That interface is **very** stable over time, and
+  will not break.  I have old programs that were built on a pre 0.9something
+  kernel that still work just fine on the latest 2.6 kernel release.
+  That interface is the one that users and application programmers can count
+  on being stable.
+
+
+Executive Summary
+-----------------
+You think you want a stable kernel interface, but you really do not, and
+you don't even know it.  What you want is a stable running driver, and
+you get that only if your driver is in the main kernel tree.  You also
+get lots of other good benefits if your driver is in the main kernel
+tree, all of which has made Linux into such a strong, stable, and mature
+operating system which is the reason you are using it in the first
+place.
+
+
+Intro
+-----
+
+It's only the odd person who wants to write a kernel driver that needs
+to worry about the in-kernel interfaces changing.  For the majority of
+the world, they neither see this interface, nor do they care about it at
+all.
+
+First off, I'm not going to address **any** legal issues about closed
+source, hidden source, binary blobs, source wrappers, or any other term
+that describes kernel drivers that do not have their source code
+released under the GPL.  Please consult a lawyer if you have any legal
+questions, I'm a programmer and hence, I'm just going to be describing
+the technical issues here (not to make light of the legal issues, they
+are real, and you do need to be aware of them at all times.)
+
+So, there are two main topics here, binary kernel interfaces and stable
+kernel source interfaces.  They both depend on each other, but we will
+discuss the binary stuff first to get it out of the way.
+
+
+Binary Kernel Interface
+-----------------------
+Assuming that we had a stable kernel source interface for the kernel, a
+binary interface would naturally happen too, right?  Wrong.  Please
+consider the following facts about the Linux kernel:
+
+  - Depending on the version of the C compiler you use, different kernel
+    data structures will contain different alignment of structures, and
+    possibly include different functions in different ways (putting
+    functions inline or not.)  The individual function organization
+    isn't that important, but the different data structure padding is
+    very important.
+
+  - Depending on what kernel build options you select, a wide range of
+    different things can be assumed by the kernel:
+
+      - different structures can contain different fields
+      - Some functions may not be implemented at all, (i.e. some locks
+	compile away to nothing for non-SMP builds.)
+      - Memory within the kernel can be aligned in different ways,
+	depending on the build options.
+
+  - Linux runs on a wide range of different processor architectures.
+    There is no way that binary drivers from one architecture will run
+    on another architecture properly.
+
+Now a number of these issues can be addressed by simply compiling your
+module for the exact specific kernel configuration, using the same exact
+C compiler that the kernel was built with.  This is sufficient if you
+want to provide a module for a specific release version of a specific
+Linux distribution.  But multiply that single build by the number of
+different Linux distributions and the number of different supported
+releases of the Linux distribution and you quickly have a nightmare of
+different build options on different releases.  Also realize that each
+Linux distribution release contains a number of different kernels, all
+tuned to different hardware types (different processor types and
+different options), so for even a single release you will need to create
+multiple versions of your module.
+
+Trust me, you will go insane over time if you try to support this kind
+of release, I learned this the hard way a long time ago...
+
+
+Stable Kernel Source Interfaces
+-------------------------------
+
+This is a much more "volatile" topic if you talk to people who try to
+keep a Linux kernel driver that is not in the main kernel tree up to
+date over time.
+
+Linux kernel development is continuous and at a rapid pace, never
+stopping to slow down.  As such, the kernel developers find bugs in
+current interfaces, or figure out a better way to do things.  If they do
+that, they then fix the current interfaces to work better.  When they do
+so, function names may change, structures may grow or shrink, and
+function parameters may be reworked.  If this happens, all of the
+instances of where this interface is used within the kernel are fixed up
+at the same time, ensuring that everything continues to work properly.
+
+As a specific examples of this, the in-kernel USB interfaces have
+undergone at least three different reworks over the lifetime of this
+subsystem.  These reworks were done to address a number of different
+issues:
+
+  - A change from a synchronous model of data streams to an asynchronous
+    one.  This reduced the complexity of a number of drivers and
+    increased the throughput of all USB drivers such that we are now
+    running almost all USB devices at their maximum speed possible.
+  - A change was made in the way data packets were allocated from the
+    USB core by USB drivers so that all drivers now needed to provide
+    more information to the USB core to fix a number of documented
+    deadlocks.
+
+This is in stark contrast to a number of closed source operating systems
+which have had to maintain their older USB interfaces over time.  This
+provides the ability for new developers to accidentally use the old
+interfaces and do things in improper ways, causing the stability of the
+operating system to suffer.
+
+In both of these instances, all developers agreed that these were
+important changes that needed to be made, and they were made, with
+relatively little pain.  If Linux had to ensure that it will preserve a
+stable source interface, a new interface would have been created, and
+the older, broken one would have had to be maintained over time, leading
+to extra work for the USB developers.  Since all Linux USB developers do
+their work on their own time, asking programmers to do extra work for no
+gain, for free, is not a possibility.
+
+Security issues are also very important for Linux.  When a
+security issue is found, it is fixed in a very short amount of time.  A
+number of times this has caused internal kernel interfaces to be
+reworked to prevent the security problem from occurring.  When this
+happens, all drivers that use the interfaces were also fixed at the
+same time, ensuring that the security problem was fixed and could not
+come back at some future time accidentally.  If the internal interfaces
+were not allowed to change, fixing this kind of security problem and
+insuring that it could not happen again would not be possible.
+
+Kernel interfaces are cleaned up over time.  If there is no one using a
+current interface, it is deleted.  This ensures that the kernel remains
+as small as possible, and that all potential interfaces are tested as
+well as they can be (unused interfaces are pretty much impossible to
+test for validity.)
+
+
+What to do
+----------
+
+So, if you have a Linux kernel driver that is not in the main kernel
+tree, what are you, a developer, supposed to do?  Releasing a binary
+driver for every different kernel version for every distribution is a
+nightmare, and trying to keep up with an ever changing kernel interface
+is also a rough job.
+
+Simple, get your kernel driver into the main kernel tree (remember we are
+talking about drivers released under a GPL-compatible license here, if your
+code doesn't fall under this category, good luck, you are on your own here,
+you leech).  If your driver is in the tree, and a kernel interface changes,
+it will be fixed up by the person who did the kernel change in the first
+place.  This ensures that your driver is always buildable, and works over
+time, with very little effort on your part.
+
+The very good side effects of having your driver in the main kernel tree
+are:
+
+  - The quality of the driver will rise as the maintenance costs (to the
+    original developer) will decrease.
+  - Other developers will add features to your driver.
+  - Other people will find and fix bugs in your driver.
+  - Other people will find tuning opportunities in your driver.
+  - Other people will update the driver for you when external interface
+    changes require it.
+  - The driver automatically gets shipped in all Linux distributions
+    without having to ask the distros to add it.
+
+As Linux supports a larger number of different devices "out of the box"
+than any other operating system, and it supports these devices on more
+different processor architectures than any other operating system, this
+proven type of development model must be doing something right :)
+
+
+
+------
+
+Thanks to Randy Dunlap, Andrew Morton, David Brownell, Hanna Linder,
+Robert Love, and Nishanth Aravamudan for their review and comments on
+early drafts of this paper.
diff --git a/Documentation/process/stable-kernel-rules.rst b/Documentation/process/stable-kernel-rules.rst
new file mode 100644
index 000000000..fbcb48bc2
--- /dev/null
+++ b/Documentation/process/stable-kernel-rules.rst
@@ -0,0 +1,187 @@
+.. _stable_kernel_rules:
+
+Everything you ever wanted to know about Linux -stable releases
+===============================================================
+
+Rules on what kind of patches are accepted, and which ones are not, into the
+"-stable" tree:
+
+ - It must be obviously correct and tested.
+ - It cannot be bigger than 100 lines, with context.
+ - It must fix only one thing.
+ - It must fix a real bug that bothers people (not a, "This could be a
+   problem..." type thing).
+ - It must fix a problem that causes a build error (but not for things
+   marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
+   security issue, or some "oh, that's not good" issue.  In short, something
+   critical.
+ - Serious issues as reported by a user of a distribution kernel may also
+   be considered if they fix a notable performance or interactivity issue.
+   As these fixes are not as obvious and have a higher risk of a subtle
+   regression they should only be submitted by a distribution kernel
+   maintainer and include an addendum linking to a bugzilla entry if it
+   exists and additional information on the user-visible impact.
+ - New device IDs and quirks are also accepted.
+ - No "theoretical race condition" issues, unless an explanation of how the
+   race can be exploited is also provided.
+ - It cannot contain any "trivial" fixes in it (spelling changes,
+   whitespace cleanups, etc).
+ - It must follow the
+   :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+   rules.
+ - It or an equivalent fix must already exist in Linus' tree (upstream).
+
+
+Procedure for submitting patches to the -stable tree
+----------------------------------------------------
+
+ - Security patches should not be handled (solely) by the -stable review
+   process but should follow the procedures in
+   :ref:`Documentation/admin-guide/security-bugs.rst <securitybugs>`.
+
+For all other submissions, choose one of the following procedures
+-----------------------------------------------------------------
+
+.. _option_1:
+
+Option 1
+********
+
+To have the patch automatically included in the stable tree, add the tag
+
+.. code-block:: none
+
+     Cc: stable@vger.kernel.org
+
+in the sign-off area. Once the patch is merged it will be applied to
+the stable tree without anything else needing to be done by the author
+or subsystem maintainer.
+
+.. _option_2:
+
+Option 2
+********
+
+After the patch has been merged to Linus' tree, send an email to
+stable@vger.kernel.org containing the subject of the patch, the commit ID,
+why you think it should be applied, and what kernel version you wish it to
+be applied to.
+
+.. _option_3:
+
+Option 3
+********
+
+Send the patch, after verifying that it follows the above rules, to
+stable@vger.kernel.org.  You must note the upstream commit ID in the
+changelog of your submission, as well as the kernel version you wish
+it to be applied to.
+
+:ref:`option_1` is **strongly** preferred, is the easiest and most common.
+:ref:`option_2` and :ref:`option_3` are more useful if the patch isn't deemed
+worthy at the time it is applied to a public git tree (for instance, because
+it deserves more regression testing first).  :ref:`option_3` is especially
+useful if the patch needs some special handling to apply to an older kernel
+(e.g., if API's have changed in the meantime).
+
+Note that for :ref:`option_3`, if the patch deviates from the original
+upstream patch (for example because it had to be backported) this must be very
+clearly documented and justified in the patch description.
+
+The upstream commit ID must be specified with a separate line above the commit
+text, like this:
+
+.. code-block:: none
+
+    commit <sha1> upstream.
+
+Additionally, some patches submitted via :ref:`option_1` may have additional
+patch prerequisites which can be cherry-picked. This can be specified in the
+following format in the sign-off area:
+
+.. code-block:: none
+
+     Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle
+     Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle
+     Cc: <stable@vger.kernel.org> # 3.3.x: fd21073: sched: Fix affinity logic
+     Cc: <stable@vger.kernel.org> # 3.3.x
+     Signed-off-by: Ingo Molnar <mingo@elte.hu>
+
+The tag sequence has the meaning of:
+
+.. code-block:: none
+
+     git cherry-pick a1f84a3
+     git cherry-pick 1b9508f
+     git cherry-pick fd21073
+     git cherry-pick <this commit>
+
+Also, some patches may have kernel version prerequisites.  This can be
+specified in the following format in the sign-off area:
+
+.. code-block:: none
+
+     Cc: <stable@vger.kernel.org> # 3.3.x
+
+The tag has the meaning of:
+
+.. code-block:: none
+
+     git cherry-pick <this commit>
+
+For each "-stable" tree starting with the specified version.
+
+Following the submission:
+
+ - The sender will receive an ACK when the patch has been accepted into the
+   queue, or a NAK if the patch is rejected.  This response might take a few
+   days, according to the developer's schedules.
+ - If accepted, the patch will be added to the -stable queue, for review by
+   other developers and by the relevant subsystem maintainer.
+
+
+Review cycle
+------------
+
+ - When the -stable maintainers decide for a review cycle, the patches will be
+   sent to the review committee, and the maintainer of the affected area of
+   the patch (unless the submitter is the maintainer of the area) and CC: to
+   the linux-kernel mailing list.
+ - The review committee has 48 hours in which to ACK or NAK the patch.
+ - If the patch is rejected by a member of the committee, or linux-kernel
+   members object to the patch, bringing up issues that the maintainers and
+   members did not realize, the patch will be dropped from the queue.
+ - At the end of the review cycle, the ACKed patches will be added to the
+   latest -stable release, and a new -stable release will happen.
+ - Security patches will be accepted into the -stable tree directly from the
+   security kernel team, and not go through the normal review cycle.
+   Contact the kernel security team for more details on this procedure.
+
+Trees
+-----
+
+ - The queues of patches, for both completed versions and in progress
+   versions can be found at:
+
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git
+
+ - The finalized and tagged releases of all stable kernels can be found
+   in separate branches per version at:
+
+	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
+
+ - The release candidate of all stable kernel versions can be found at:
+
+        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/
+
+   .. warning::
+      The -stable-rc tree is a snapshot in time of the stable-queue tree and
+      will change frequently, hence will be rebased often. It should only be
+      used for testing purposes (e.g. to be consumed by CI systems).
+
+
+Review committee
+----------------
+
+ - This is made up of a number of kernel developers who have volunteered for
+   this task, and a few that haven't.
diff --git a/Documentation/process/submit-checklist.rst b/Documentation/process/submit-checklist.rst
new file mode 100644
index 000000000..1879f881c
--- /dev/null
+++ b/Documentation/process/submit-checklist.rst
@@ -0,0 +1,122 @@
+.. _submitchecklist:
+
+Linux Kernel patch submission checklist
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Here are some basic things that developers should do if they want to see their
+kernel patch submissions accepted more quickly.
+
+These are all above and beyond the documentation that is provided in
+:ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+and elsewhere regarding submitting Linux kernel patches.
+
+
+1) If you use a facility then #include the file that defines/declares
+   that facility.  Don't depend on other header files pulling in ones
+   that you use.
+
+2) Builds cleanly:
+
+  a) with applicable or modified ``CONFIG`` options ``=y``, ``=m``, and
+     ``=n``.  No ``gcc`` warnings/errors, no linker warnings/errors.
+
+  b) Passes ``allnoconfig``, ``allmodconfig``
+
+  c) Builds successfully when using ``O=builddir``
+
+  d) Any Documentation/ changes build successfully without new warnings/errors.
+     Use ``make htmldocs`` or ``make pdfdocs`` to check the build and
+     fix any issues.
+
+3) Builds on multiple CPU architectures by using local cross-compile tools
+   or some other build farm.
+
+4) ppc64 is a good architecture for cross-compilation checking because it
+   tends to use ``unsigned long`` for 64-bit quantities.
+
+5) Check your patch for general style as detailed in
+   :ref:`Documentation/process/coding-style.rst <codingstyle>`.
+   Check for trivial violations with the patch style checker prior to
+   submission (``scripts/checkpatch.pl``).
+   You should be able to justify all violations that remain in
+   your patch.
+
+6) Any new or modified ``CONFIG`` options do not muck up the config menu and
+   default to off unless they meet the exception criteria documented in
+   ``Documentation/kbuild/kconfig-language.rst`` Menu attributes: default value.
+
+7) All new ``Kconfig`` options have help text.
+
+8) Has been carefully reviewed with respect to relevant ``Kconfig``
+   combinations.  This is very hard to get right with testing -- brainpower
+   pays off here.
+
+9) Check cleanly with sparse.
+
+10) Use ``make checkstack`` and fix any problems that it finds.
+
+    .. note::
+
+       ``checkstack`` does not point out problems explicitly,
+       but any one function that uses more than 512 bytes on the stack is a
+       candidate for change.
+
+11) Include :ref:`kernel-doc <kernel_doc>` to document global  kernel APIs.
+    (Not required for static functions, but OK there also.) Use
+    ``make htmldocs`` or ``make pdfdocs`` to check the
+    :ref:`kernel-doc <kernel_doc>` and fix any issues.
+
+12) Has been tested with ``CONFIG_PREEMPT``, ``CONFIG_DEBUG_PREEMPT``,
+    ``CONFIG_DEBUG_SLAB``, ``CONFIG_DEBUG_PAGEALLOC``, ``CONFIG_DEBUG_MUTEXES``,
+    ``CONFIG_DEBUG_SPINLOCK``, ``CONFIG_DEBUG_ATOMIC_SLEEP``,
+    ``CONFIG_PROVE_RCU`` and ``CONFIG_DEBUG_OBJECTS_RCU_HEAD`` all
+    simultaneously enabled.
+
+13) Has been build- and runtime tested with and without ``CONFIG_SMP`` and
+    ``CONFIG_PREEMPT.``
+
+16) All codepaths have been exercised with all lockdep features enabled.
+
+17) All new ``/proc`` entries are documented under ``Documentation/``
+
+18) All new kernel boot parameters are documented in
+    ``Documentation/admin-guide/kernel-parameters.rst``.
+
+19) All new module parameters are documented with ``MODULE_PARM_DESC()``
+
+20) All new userspace interfaces are documented in ``Documentation/ABI/``.
+    See ``Documentation/ABI/README`` for more information.
+    Patches that change userspace interfaces should be CCed to
+    linux-api@vger.kernel.org.
+
+21) Check that it all passes ``make headers_check``.
+
+22) Has been checked with injection of at least slab and page-allocation
+    failures.  See ``Documentation/fault-injection/``.
+
+    If the new code is substantial, addition of subsystem-specific fault
+    injection might be appropriate.
+
+23) Newly-added code has been compiled with ``gcc -W`` (use
+    ``make EXTRA_CFLAGS=-W``).  This will generate lots of noise, but is good
+    for finding bugs like "warning: comparison between signed and unsigned".
+
+24) Tested after it has been merged into the -mm patchset to make sure
+    that it still works with all of the other queued patches and various
+    changes in the VM, VFS, and other subsystems.
+
+25) All memory barriers {e.g., ``barrier()``, ``rmb()``, ``wmb()``} need a
+    comment in the source code that explains the logic of what they are doing
+    and why.
+
+26) If any ioctl's are added by the patch, then also update
+    ``Documentation/userspace-api/ioctl/ioctl-number.rst``.
+
+27) If your modified source code depends on or uses any of the kernel
+    APIs or features that are related to the following ``Kconfig`` symbols,
+    then test multiple builds with the related ``Kconfig`` symbols disabled
+    and/or ``=m`` (if that option is available) [not all of these at the
+    same time, just various/random combinations of them]:
+
+    ``CONFIG_SMP``, ``CONFIG_SYSFS``, ``CONFIG_PROC_FS``, ``CONFIG_INPUT``, ``CONFIG_PCI``, ``CONFIG_BLOCK``, ``CONFIG_PM``, ``CONFIG_MAGIC_SYSRQ``,
+    ``CONFIG_NET``, ``CONFIG_INET=n`` (but latter with ``CONFIG_NET=y``).
diff --git a/Documentation/process/submitting-drivers.rst b/Documentation/process/submitting-drivers.rst
new file mode 100644
index 000000000..3861887e0
--- /dev/null
+++ b/Documentation/process/submitting-drivers.rst
@@ -0,0 +1,194 @@
+.. _submittingdrivers:
+
+Submitting Drivers For The Linux Kernel
+=======================================
+
+This document is intended to explain how to submit device drivers to the
+various kernel trees. Note that if you are interested in video card drivers
+you should probably talk to XFree86 (https://www.xfree86.org/) and/or X.Org
+(https://x.org/) instead.
+
+.. note::
+
+   This document is old and has seen little maintenance in recent years; it
+   should probably be updated or, perhaps better, just deleted.  Most of
+   what is here can be found in the other development documents anyway.
+
+   Oh, and we don't really recommend submitting changes to XFree86 :)
+
+Also read the :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
+document.
+
+
+Allocating Device Numbers
+-------------------------
+
+Major and minor numbers for block and character devices are allocated
+by the Linux assigned name and number authority (currently this is
+Torben Mathiasen). The site is https://www.lanana.org/. This
+also deals with allocating numbers for devices that are not going to
+be submitted to the mainstream kernel.
+See :ref:`Documentation/admin-guide/devices.rst <admin_devices>`
+for more information on this.
+
+If you don't use assigned numbers then when your device is submitted it will
+be given an assigned number even if that is different from values you may
+have shipped to customers before.
+
+Who To Submit Drivers To
+------------------------
+
+Linux 2.0:
+	No new drivers are accepted for this kernel tree.
+
+Linux 2.2:
+	No new drivers are accepted for this kernel tree.
+
+Linux 2.4:
+	If the code area has a general maintainer then please submit it to
+	the maintainer listed in MAINTAINERS in the kernel file. If the
+	maintainer does not respond or you cannot find the appropriate
+	maintainer then please contact Willy Tarreau <w@1wt.eu>.
+
+Linux 2.6 and upper:
+	The same rules apply as 2.4 except that you should follow linux-kernel
+	to track changes in API's. The final contact point for Linux 2.6+
+	submissions is Andrew Morton.
+
+What Criteria Determine Acceptance
+----------------------------------
+
+Licensing:
+		The code must be released to us under the
+		GNU General Public License. If you wish the driver to be
+		useful to other communities such as BSD you may release
+		under multiple licenses. If you choose to release under
+		licenses other than the GPL, you should include your
+		rationale for your license choices in your cover letter.
+		See accepted licenses at include/linux/module.h
+
+Copyright:
+		The copyright owner must agree to use of GPL.
+		It's best if the submitter and copyright owner
+		are the same person/entity. If not, the name of
+		the person/entity authorizing use of GPL should be
+		listed in case it's necessary to verify the will of
+		the copyright owner.
+
+Interfaces:
+		If your driver uses existing interfaces and behaves like
+		other drivers in the same class it will be much more likely
+		to be accepted than if it invents gratuitous new ones.
+		If you need to implement a common API over Linux and NT
+		drivers do it in userspace.
+
+Code:
+		Please use the Linux style of code formatting as documented
+		in :ref:`Documentation/process/coding-style.rst <codingStyle>`.
+		If you have sections of code
+		that need to be in other formats, for example because they
+		are shared with a windows driver kit and you want to
+		maintain them just once separate them out nicely and note
+		this fact.
+
+Portability:
+		Pointers are not always 32bits, not all computers are little
+		endian, people do not all have floating point and you
+		shouldn't use inline x86 assembler in your driver without
+		careful thought. Pure x86 drivers generally are not popular.
+		If you only have x86 hardware it is hard to test portability
+		but it is easy to make sure the code can easily be made
+		portable.
+
+Clarity:
+		It helps if anyone can see how to fix the driver. It helps
+		you because you get patches not bug reports. If you submit a
+		driver that intentionally obfuscates how the hardware works
+		it will go in the bitbucket.
+
+PM support:
+		Since Linux is used on many portable and desktop systems, your
+		driver is likely to be used on such a system and therefore it
+		should support basic power management by implementing, if
+		necessary, the .suspend and .resume methods used during the
+		system-wide suspend and resume transitions.  You should verify
+		that your driver correctly handles the suspend and resume, but
+		if you are unable to ensure that, please at least define the
+		.suspend method returning the -ENOSYS ("Function not
+		implemented") error.  You should also try to make sure that your
+		driver uses as little power as possible when it's not doing
+		anything.  For the driver testing instructions see
+		Documentation/power/drivers-testing.rst and for a relatively
+		complete overview of the power management issues related to
+		drivers see :ref:`Documentation/driver-api/pm/devices.rst <driverapi_pm_devices>`.
+
+Control:
+		In general if there is active maintenance of a driver by
+		the author then patches will be redirected to them unless
+		they are totally obvious and without need of checking.
+		If you want to be the contact and update point for the
+		driver it is a good idea to state this in the comments,
+		and include an entry in MAINTAINERS for your driver.
+
+What Criteria Do Not Determine Acceptance
+-----------------------------------------
+
+Vendor:
+		Being the hardware vendor and maintaining the driver is
+		often a good thing. If there is a stable working driver from
+		other people already in the tree don't expect 'we are the
+		vendor' to get your driver chosen. Ideally work with the
+		existing driver author to build a single perfect driver.
+
+Author:
+		It doesn't matter if a large Linux company wrote the driver,
+		or you did. Nobody has any special access to the kernel
+		tree. Anyone who tells you otherwise isn't telling the
+		whole story.
+
+
+Resources
+---------
+
+Linux kernel master tree:
+	ftp.\ *country_code*\ .kernel.org:/pub/linux/kernel/...
+
+	where *country_code* == your country code, such as
+	**us**, **uk**, **fr**, etc.
+
+	https://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git
+
+Linux kernel mailing list:
+	linux-kernel@vger.kernel.org
+	[mail majordomo@vger.kernel.org to subscribe]
+
+Linux Device Drivers, Third Edition (covers 2.6.10):
+	https://lwn.net/Kernel/LDD3/  (free version)
+
+LWN.net:
+	Weekly summary of kernel development activity - https://lwn.net/
+
+	2.6 API changes:
+
+		https://lwn.net/Articles/2.6-kernel-api/
+
+	Porting drivers from prior kernels to 2.6:
+
+		https://lwn.net/Articles/driver-porting/
+
+KernelNewbies:
+	Documentation and assistance for new kernel programmers
+
+		https://kernelnewbies.org/
+
+Linux USB project:
+	http://www.linux-usb.org/
+
+How to NOT write kernel driver by Arjan van de Ven:
+	http://www.fenrus.org/how-to-not-write-a-device-driver-paper.pdf
+
+Kernel Janitor:
+	https://kernelnewbies.org/KernelJanitors
+
+GIT, Fast Version Control System:
+	https://git-scm.com/
diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst
new file mode 100644
index 000000000..edd263e09
--- /dev/null
+++ b/Documentation/process/submitting-patches.rst
@@ -0,0 +1,770 @@
+.. _submittingpatches:
+
+Submitting patches: the essential guide to getting your code into the kernel
+============================================================================
+
+For a person or company who wishes to submit a change to the Linux
+kernel, the process can sometimes be daunting if you're not familiar
+with "the system."  This text is a collection of suggestions which
+can greatly increase the chances of your change being accepted.
+
+This document contains a large number of suggestions in a relatively terse
+format.  For detailed information on how the kernel development process
+works, see :doc:`development-process`. Also, read :doc:`submit-checklist`
+for a list of items to check before submitting code.  If you are submitting
+a driver, also read :doc:`submitting-drivers`; for device tree binding patches,
+read :doc:`submitting-patches`.
+
+This documentation assumes that you're using ``git`` to prepare your patches.
+If you're unfamiliar with ``git``, you would be well-advised to learn how to
+use it, it will make your life as a kernel developer and in general much
+easier.
+
+Obtain a current source tree
+----------------------------
+
+If you do not have a repository with the current kernel source handy, use
+``git`` to obtain one.  You'll want to start with the mainline repository,
+which can be grabbed with::
+
+  git clone git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
+
+Note, however, that you may not want to develop against the mainline tree
+directly.  Most subsystem maintainers run their own trees and want to see
+patches prepared against those trees.  See the **T:** entry for the subsystem
+in the MAINTAINERS file to find that tree, or simply ask the maintainer if
+the tree is not listed there.
+
+.. _describe_changes:
+
+Describe your changes
+---------------------
+
+Describe your problem.  Whether your patch is a one-line bug fix or
+5000 lines of a new feature, there must be an underlying problem that
+motivated you to do this work.  Convince the reviewer that there is a
+problem worth fixing and that it makes sense for them to read past the
+first paragraph.
+
+Describe user-visible impact.  Straight up crashes and lockups are
+pretty convincing, but not all bugs are that blatant.  Even if the
+problem was spotted during code review, describe the impact you think
+it can have on users.  Keep in mind that the majority of Linux
+installations run kernels from secondary stable trees or
+vendor/product-specific trees that cherry-pick only specific patches
+from upstream, so include anything that could help route your change
+downstream: provoking circumstances, excerpts from dmesg, crash
+descriptions, performance regressions, latency spikes, lockups, etc.
+
+Quantify optimizations and trade-offs.  If you claim improvements in
+performance, memory consumption, stack footprint, or binary size,
+include numbers that back them up.  But also describe non-obvious
+costs.  Optimizations usually aren't free but trade-offs between CPU,
+memory, and readability; or, when it comes to heuristics, between
+different workloads.  Describe the expected downsides of your
+optimization so that the reviewer can weigh costs against benefits.
+
+Once the problem is established, describe what you are actually doing
+about it in technical detail.  It's important to describe the change
+in plain English for the reviewer to verify that the code is behaving
+as you intend it to.
+
+The maintainer will thank you if you write your patch description in a
+form which can be easily pulled into Linux's source code management
+system, ``git``, as a "commit log".  See :ref:`the_canonical_patch_format`.
+
+Solve only one problem per patch.  If your description starts to get
+long, that's a sign that you probably need to split up your patch.
+See :ref:`split_changes`.
+
+When you submit or resubmit a patch or patch series, include the
+complete patch description and justification for it.  Don't just
+say that this is version N of the patch (series).  Don't expect the
+subsystem maintainer to refer back to earlier patch versions or referenced
+URLs to find the patch description and put that into the patch.
+I.e., the patch (series) and its description should be self-contained.
+This benefits both the maintainers and reviewers.  Some reviewers
+probably didn't even receive earlier versions of the patch.
+
+Describe your changes in imperative mood, e.g. "make xyzzy do frotz"
+instead of "[This patch] makes xyzzy do frotz" or "[I] changed xyzzy
+to do frotz", as if you are giving orders to the codebase to change
+its behaviour.
+
+If the patch fixes a logged bug entry, refer to that bug entry by
+number and URL.  If the patch follows from a mailing list discussion,
+give a URL to the mailing list archive; use the https://lkml.kernel.org/
+redirector with a ``Message-Id``, to ensure that the links cannot become
+stale.
+
+However, try to make your explanation understandable without external
+resources.  In addition to giving a URL to a mailing list archive or
+bug, summarize the relevant points of the discussion that led to the
+patch as submitted.
+
+If you want to refer to a specific commit, don't just refer to the
+SHA-1 ID of the commit. Please also include the oneline summary of
+the commit, to make it easier for reviewers to know what it is about.
+Example::
+
+	Commit e21d2170f36602ae2708 ("video: remove unnecessary
+	platform_set_drvdata()") removed the unnecessary
+	platform_set_drvdata(), but left the variable "dev" unused,
+	delete it.
+
+You should also be sure to use at least the first twelve characters of the
+SHA-1 ID.  The kernel repository holds a *lot* of objects, making
+collisions with shorter IDs a real possibility.  Bear in mind that, even if
+there is no collision with your six-character ID now, that condition may
+change five years from now.
+
+If your patch fixes a bug in a specific commit, e.g. you found an issue using
+``git bisect``, please use the 'Fixes:' tag with the first 12 characters of
+the SHA-1 ID, and the one line summary.  Do not split the tag across multiple
+lines, tags are exempt from the "wrap at 75 columns" rule in order to simplify
+parsing scripts.  For example::
+
+	Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed")
+
+The following ``git config`` settings can be used to add a pretty format for
+outputting the above style in the ``git log`` or ``git show`` commands::
+
+	[core]
+		abbrev = 12
+	[pretty]
+		fixes = Fixes: %h (\"%s\")
+
+An example call::
+
+	$ git log -1 --pretty=fixes 54a4f0239f2e
+	Fixes: 54a4f0239f2e ("KVM: MMU: make kvm_mmu_zap_page() return the number of pages it actually freed")
+
+.. _split_changes:
+
+Separate your changes
+---------------------
+
+Separate each **logical change** into a separate patch.
+
+For example, if your changes include both bug fixes and performance
+enhancements for a single driver, separate those changes into two
+or more patches.  If your changes include an API update, and a new
+driver which uses that new API, separate those into two patches.
+
+On the other hand, if you make a single change to numerous files,
+group those changes into a single patch.  Thus a single logical change
+is contained within a single patch.
+
+The point to remember is that each patch should make an easily understood
+change that can be verified by reviewers.  Each patch should be justifiable
+on its own merits.
+
+If one patch depends on another patch in order for a change to be
+complete, that is OK.  Simply note **"this patch depends on patch X"**
+in your patch description.
+
+When dividing your change into a series of patches, take special care to
+ensure that the kernel builds and runs properly after each patch in the
+series.  Developers using ``git bisect`` to track down a problem can end up
+splitting your patch series at any point; they will not thank you if you
+introduce bugs in the middle.
+
+If you cannot condense your patch set into a smaller set of patches,
+then only post say 15 or so at a time and wait for review and integration.
+
+
+
+Style-check your changes
+------------------------
+
+Check your patch for basic style violations, details of which can be
+found in
+:ref:`Documentation/process/coding-style.rst <codingstyle>`.
+Failure to do so simply wastes
+the reviewers time and will get your patch rejected, probably
+without even being read.
+
+One significant exception is when moving code from one file to
+another -- in this case you should not modify the moved code at all in
+the same patch which moves it.  This clearly delineates the act of
+moving the code and your changes.  This greatly aids review of the
+actual differences and allows tools to better track the history of
+the code itself.
+
+Check your patches with the patch style checker prior to submission
+(scripts/checkpatch.pl).  Note, though, that the style checker should be
+viewed as a guide, not as a replacement for human judgment.  If your code
+looks better with a violation then its probably best left alone.
+
+The checker reports at three levels:
+ - ERROR: things that are very likely to be wrong
+ - WARNING: things requiring careful review
+ - CHECK: things requiring thought
+
+You should be able to justify all violations that remain in your
+patch.
+
+
+Select the recipients for your patch
+------------------------------------
+
+You should always copy the appropriate subsystem maintainer(s) on any patch
+to code that they maintain; look through the MAINTAINERS file and the
+source code revision history to see who those maintainers are.  The
+script scripts/get_maintainer.pl can be very useful at this step.  If you
+cannot find a maintainer for the subsystem you are working on, Andrew
+Morton (akpm@linux-foundation.org) serves as a maintainer of last resort.
+
+You should also normally choose at least one mailing list to receive a copy
+of your patch set.  linux-kernel@vger.kernel.org functions as a list of
+last resort, but the volume on that list has caused a number of developers
+to tune it out.  Look in the MAINTAINERS file for a subsystem-specific
+list; your patch will probably get more attention there.  Please do not
+spam unrelated lists, though.
+
+Many kernel-related lists are hosted on vger.kernel.org; you can find a
+list of them at http://vger.kernel.org/vger-lists.html.  There are
+kernel-related lists hosted elsewhere as well, though.
+
+Do not send more than 15 patches at once to the vger mailing lists!!!
+
+Linus Torvalds is the final arbiter of all changes accepted into the
+Linux kernel.  His e-mail address is <torvalds@linux-foundation.org>.
+He gets a lot of e-mail, and, at this point, very few patches go through
+Linus directly, so typically you should do your best to -avoid-
+sending him e-mail.
+
+If you have a patch that fixes an exploitable security bug, send that patch
+to security@kernel.org.  For severe bugs, a short embargo may be considered
+to allow distributors to get the patch out to users; in such cases,
+obviously, the patch should not be sent to any public lists. See also
+:doc:`/admin-guide/security-bugs`.
+
+Patches that fix a severe bug in a released kernel should be directed
+toward the stable maintainers by putting a line like this::
+
+  Cc: stable@vger.kernel.org
+
+into the sign-off area of your patch (note, NOT an email recipient).  You
+should also read
+:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
+in addition to this file.
+
+If changes affect userland-kernel interfaces, please send the MAN-PAGES
+maintainer (as listed in the MAINTAINERS file) a man-pages patch, or at
+least a notification of the change, so that some information makes its way
+into the manual pages.  User-space API changes should also be copied to
+linux-api@vger.kernel.org.
+
+For small patches you may want to CC the Trivial Patch Monkey
+trivial@kernel.org which collects "trivial" patches. Have a look
+into the MAINTAINERS file for its current manager.
+
+Trivial patches must qualify for one of the following rules:
+
+- Spelling fixes in documentation
+- Spelling fixes for errors which could break :manpage:`grep(1)`
+- Warning fixes (cluttering with useless warnings is bad)
+- Compilation fixes (only if they are actually correct)
+- Runtime fixes (only if they actually fix things)
+- Removing use of deprecated functions/macros
+- Contact detail and documentation fixes
+- Non-portable code replaced by portable code (even in arch-specific,
+  since people copy, as long as it's trivial)
+- Any fix by the author/maintainer of the file (ie. patch monkey
+  in re-transmission mode)
+
+
+
+No MIME, no links, no compression, no attachments.  Just plain text
+-------------------------------------------------------------------
+
+Linus and other kernel developers need to be able to read and comment
+on the changes you are submitting.  It is important for a kernel
+developer to be able to "quote" your changes, using standard e-mail
+tools, so that they may comment on specific portions of your code.
+
+For this reason, all patches should be submitted by e-mail "inline". The
+easiest way to do this is with ``git send-email``, which is strongly
+recommended.  An interactive tutorial for ``git send-email`` is available at
+https://git-send-email.io.
+
+If you choose not to use ``git send-email``:
+
+.. warning::
+
+  Be wary of your editor's word-wrap corrupting your patch,
+  if you choose to cut-n-paste your patch.
+
+Do not attach the patch as a MIME attachment, compressed or not.
+Many popular e-mail applications will not always transmit a MIME
+attachment as plain text, making it impossible to comment on your
+code.  A MIME attachment also takes Linus a bit more time to process,
+decreasing the likelihood of your MIME-attached change being accepted.
+
+Exception:  If your mailer is mangling patches then someone may ask
+you to re-send them using MIME.
+
+See :doc:`/process/email-clients` for hints about configuring your e-mail
+client so that it sends your patches untouched.
+
+Respond to review comments
+--------------------------
+
+Your patch will almost certainly get comments from reviewers on ways in
+which the patch can be improved, in the form of a reply to your email. You must
+respond to those comments; ignoring reviewers is a good way to get ignored in
+return. You can simply reply to their emails to answer their comments. Review
+comments or questions that do not lead to a code change should almost certainly
+bring about a comment or changelog entry so that the next reviewer better
+understands what is going on.
+
+Be sure to tell the reviewers what changes you are making and to thank them
+for their time.  Code review is a tiring and time-consuming process, and
+reviewers sometimes get grumpy.  Even in that case, though, respond
+politely and address the problems they have pointed out.
+
+See :doc:`email-clients` for recommendations on email
+clients and mailing list etiquette.
+
+
+Don't get discouraged - or impatient
+------------------------------------
+
+After you have submitted your change, be patient and wait.  Reviewers are
+busy people and may not get to your patch right away.
+
+Once upon a time, patches used to disappear into the void without comment,
+but the development process works more smoothly than that now.  You should
+receive comments within a week or so; if that does not happen, make sure
+that you have sent your patches to the right place.  Wait for a minimum of
+one week before resubmitting or pinging reviewers - possibly longer during
+busy times like merge windows.
+
+
+Include PATCH in the subject
+-----------------------------
+
+Due to high e-mail traffic to Linus, and to linux-kernel, it is common
+convention to prefix your subject line with [PATCH].  This lets Linus
+and other kernel developers more easily distinguish patches from other
+e-mail discussions.
+
+``git send-email`` will do this for you automatically.
+
+
+Sign your work - the Developer's Certificate of Origin
+------------------------------------------------------
+
+To improve tracking of who did what, especially with patches that can
+percolate to their final resting place in the kernel through several
+layers of maintainers, we've introduced a "sign-off" procedure on
+patches that are being emailed around.
+
+The sign-off is a simple line at the end of the explanation for the
+patch, which certifies that you wrote it or otherwise have the right to
+pass it on as an open-source patch.  The rules are pretty simple: if you
+can certify the below:
+
+Developer's Certificate of Origin 1.1
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+By making a contribution to this project, I certify that:
+
+        (a) The contribution was created in whole or in part by me and I
+            have the right to submit it under the open source license
+            indicated in the file; or
+
+        (b) The contribution is based upon previous work that, to the best
+            of my knowledge, is covered under an appropriate open source
+            license and I have the right under that license to submit that
+            work with modifications, whether created in whole or in part
+            by me, under the same open source license (unless I am
+            permitted to submit under a different license), as indicated
+            in the file; or
+
+        (c) The contribution was provided directly to me by some other
+            person who certified (a), (b) or (c) and I have not modified
+            it.
+
+        (d) I understand and agree that this project and the contribution
+            are public and that a record of the contribution (including all
+            personal information I submit with it, including my sign-off) is
+            maintained indefinitely and may be redistributed consistent with
+            this project or the open source license(s) involved.
+
+then you just add a line saying::
+
+	Signed-off-by: Random J Developer <random@developer.example.org>
+
+using your real name (sorry, no pseudonyms or anonymous contributions.)
+This will be done for you automatically if you use ``git commit -s``.
+
+Some people also put extra tags at the end.  They'll just be ignored for
+now, but you can do this to mark internal company procedures or just
+point out some special detail about the sign-off.
+
+
+When to use Acked-by:, Cc:, and Co-developed-by:
+------------------------------------------------
+
+The Signed-off-by: tag indicates that the signer was involved in the
+development of the patch, or that he/she was in the patch's delivery path.
+
+If a person was not directly involved in the preparation or handling of a
+patch but wishes to signify and record their approval of it then they can
+ask to have an Acked-by: line added to the patch's changelog.
+
+Acked-by: is often used by the maintainer of the affected code when that
+maintainer neither contributed to nor forwarded the patch.
+
+Acked-by: is not as formal as Signed-off-by:.  It is a record that the acker
+has at least reviewed the patch and has indicated acceptance.  Hence patch
+mergers will sometimes manually convert an acker's "yep, looks good to me"
+into an Acked-by: (but note that it is usually better to ask for an
+explicit ack).
+
+Acked-by: does not necessarily indicate acknowledgement of the entire patch.
+For example, if a patch affects multiple subsystems and has an Acked-by: from
+one subsystem maintainer then this usually indicates acknowledgement of just
+the part which affects that maintainer's code.  Judgement should be used here.
+When in doubt people should refer to the original discussion in the mailing
+list archives.
+
+If a person has had the opportunity to comment on a patch, but has not
+provided such comments, you may optionally add a ``Cc:`` tag to the patch.
+This is the only tag which might be added without an explicit action by the
+person it names - but it should indicate that this person was copied on the
+patch.  This tag documents that potentially interested parties
+have been included in the discussion.
+
+Co-developed-by: states that the patch was co-created by multiple developers;
+it is a used to give attribution to co-authors (in addition to the author
+attributed by the From: tag) when several people work on a single patch.  Since
+Co-developed-by: denotes authorship, every Co-developed-by: must be immediately
+followed by a Signed-off-by: of the associated co-author.  Standard sign-off
+procedure applies, i.e. the ordering of Signed-off-by: tags should reflect the
+chronological history of the patch insofar as possible, regardless of whether
+the author is attributed via From: or Co-developed-by:.  Notably, the last
+Signed-off-by: must always be that of the developer submitting the patch.
+
+Note, the From: tag is optional when the From: author is also the person (and
+email) listed in the From: line of the email header.
+
+Example of a patch submitted by the From: author::
+
+	<changelog>
+
+	Co-developed-by: First Co-Author <first@coauthor.example.org>
+	Signed-off-by: First Co-Author <first@coauthor.example.org>
+	Co-developed-by: Second Co-Author <second@coauthor.example.org>
+	Signed-off-by: Second Co-Author <second@coauthor.example.org>
+	Signed-off-by: From Author <from@author.example.org>
+
+Example of a patch submitted by a Co-developed-by: author::
+
+	From: From Author <from@author.example.org>
+
+	<changelog>
+
+	Co-developed-by: Random Co-Author <random@coauthor.example.org>
+	Signed-off-by: Random Co-Author <random@coauthor.example.org>
+	Signed-off-by: From Author <from@author.example.org>
+	Co-developed-by: Submitting Co-Author <sub@coauthor.example.org>
+	Signed-off-by: Submitting Co-Author <sub@coauthor.example.org>
+
+
+Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:
+----------------------------------------------------------------------
+
+The Reported-by tag gives credit to people who find bugs and report them and it
+hopefully inspires them to help us again in the future.  Please note that if
+the bug was reported in private, then ask for permission first before using the
+Reported-by tag.
+
+A Tested-by: tag indicates that the patch has been successfully tested (in
+some environment) by the person named.  This tag informs maintainers that
+some testing has been performed, provides a means to locate testers for
+future patches, and ensures credit for the testers.
+
+Reviewed-by:, instead, indicates that the patch has been reviewed and found
+acceptable according to the Reviewer's Statement:
+
+Reviewer's statement of oversight
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+By offering my Reviewed-by: tag, I state that:
+
+	 (a) I have carried out a technical review of this patch to
+	     evaluate its appropriateness and readiness for inclusion into
+	     the mainline kernel.
+
+	 (b) Any problems, concerns, or questions relating to the patch
+	     have been communicated back to the submitter.  I am satisfied
+	     with the submitter's response to my comments.
+
+	 (c) While there may be things that could be improved with this
+	     submission, I believe that it is, at this time, (1) a
+	     worthwhile modification to the kernel, and (2) free of known
+	     issues which would argue against its inclusion.
+
+	 (d) While I have reviewed the patch and believe it to be sound, I
+	     do not (unless explicitly stated elsewhere) make any
+	     warranties or guarantees that it will achieve its stated
+	     purpose or function properly in any given situation.
+
+A Reviewed-by tag is a statement of opinion that the patch is an
+appropriate modification of the kernel without any remaining serious
+technical issues.  Any interested reviewer (who has done the work) can
+offer a Reviewed-by tag for a patch.  This tag serves to give credit to
+reviewers and to inform maintainers of the degree of review which has been
+done on the patch.  Reviewed-by: tags, when supplied by reviewers known to
+understand the subject area and to perform thorough reviews, will normally
+increase the likelihood of your patch getting into the kernel.
+
+Both Tested-by and Reviewed-by tags, once received on mailing list from tester
+or reviewer, should be added by author to the applicable patches when sending
+next versions.  However if the patch has changed substantially in following
+version, these tags might not be applicable anymore and thus should be removed.
+Usually removal of someone's Tested-by or Reviewed-by tags should be mentioned
+in the patch changelog (after the '---' separator).
+
+A Suggested-by: tag indicates that the patch idea is suggested by the person
+named and ensures credit to the person for the idea. Please note that this
+tag should not be added without the reporter's permission, especially if the
+idea was not posted in a public forum. That said, if we diligently credit our
+idea reporters, they will, hopefully, be inspired to help us again in the
+future.
+
+A Fixes: tag indicates that the patch fixes an issue in a previous commit. It
+is used to make it easy to determine where a bug originated, which can help
+review a bug fix. This tag also assists the stable kernel team in determining
+which stable kernel versions should receive your fix. This is the preferred
+method for indicating a bug fixed by the patch. See :ref:`describe_changes`
+for more details.
+
+.. _the_canonical_patch_format:
+
+The canonical patch format
+--------------------------
+
+This section describes how the patch itself should be formatted.  Note
+that, if you have your patches stored in a ``git`` repository, proper patch
+formatting can be had with ``git format-patch``.  The tools cannot create
+the necessary text, though, so read the instructions below anyway.
+
+The canonical patch subject line is::
+
+    Subject: [PATCH 001/123] subsystem: summary phrase
+
+The canonical patch message body contains the following:
+
+  - A ``from`` line specifying the patch author, followed by an empty
+    line (only needed if the person sending the patch is not the author).
+
+  - The body of the explanation, line wrapped at 75 columns, which will
+    be copied to the permanent changelog to describe this patch.
+
+  - An empty line.
+
+  - The ``Signed-off-by:`` lines, described above, which will
+    also go in the changelog.
+
+  - A marker line containing simply ``---``.
+
+  - Any additional comments not suitable for the changelog.
+
+  - The actual patch (``diff`` output).
+
+The Subject line format makes it very easy to sort the emails
+alphabetically by subject line - pretty much any email reader will
+support that - since because the sequence number is zero-padded,
+the numerical and alphabetic sort is the same.
+
+The ``subsystem`` in the email's Subject should identify which
+area or subsystem of the kernel is being patched.
+
+The ``summary phrase`` in the email's Subject should concisely
+describe the patch which that email contains.  The ``summary
+phrase`` should not be a filename.  Do not use the same ``summary
+phrase`` for every patch in a whole patch series (where a ``patch
+series`` is an ordered sequence of multiple, related patches).
+
+Bear in mind that the ``summary phrase`` of your email becomes a
+globally-unique identifier for that patch.  It propagates all the way
+into the ``git`` changelog.  The ``summary phrase`` may later be used in
+developer discussions which refer to the patch.  People will want to
+google for the ``summary phrase`` to read discussion regarding that
+patch.  It will also be the only thing that people may quickly see
+when, two or three months later, they are going through perhaps
+thousands of patches using tools such as ``gitk`` or ``git log
+--oneline``.
+
+For these reasons, the ``summary`` must be no more than 70-75
+characters, and it must describe both what the patch changes, as well
+as why the patch might be necessary.  It is challenging to be both
+succinct and descriptive, but that is what a well-written summary
+should do.
+
+The ``summary phrase`` may be prefixed by tags enclosed in square
+brackets: "Subject: [PATCH <tag>...] <summary phrase>".  The tags are
+not considered part of the summary phrase, but describe how the patch
+should be treated.  Common tags might include a version descriptor if
+the multiple versions of the patch have been sent out in response to
+comments (i.e., "v1, v2, v3"), or "RFC" to indicate a request for
+comments.  If there are four patches in a patch series the individual
+patches may be numbered like this: 1/4, 2/4, 3/4, 4/4.  This assures
+that developers understand the order in which the patches should be
+applied and that they have reviewed or applied all of the patches in
+the patch series.
+
+A couple of example Subjects::
+
+    Subject: [PATCH 2/5] ext2: improve scalability of bitmap searching
+    Subject: [PATCH v2 01/27] x86: fix eflags tracking
+
+The ``from`` line must be the very first line in the message body,
+and has the form:
+
+        From: Patch Author <author@example.com>
+
+The ``from`` line specifies who will be credited as the author of the
+patch in the permanent changelog.  If the ``from`` line is missing,
+then the ``From:`` line from the email header will be used to determine
+the patch author in the changelog.
+
+The explanation body will be committed to the permanent source
+changelog, so should make sense to a competent reader who has long
+since forgotten the immediate details of the discussion that might
+have led to this patch.  Including symptoms of the failure which the
+patch addresses (kernel log messages, oops messages, etc.) is
+especially useful for people who might be searching the commit logs
+looking for the applicable patch.  If a patch fixes a compile failure,
+it may not be necessary to include _all_ of the compile failures; just
+enough that it is likely that someone searching for the patch can find
+it.  As in the ``summary phrase``, it is important to be both succinct as
+well as descriptive.
+
+The ``---`` marker line serves the essential purpose of marking for patch
+handling tools where the changelog message ends.
+
+One good use for the additional comments after the ``---`` marker is for
+a ``diffstat``, to show what files have changed, and the number of
+inserted and deleted lines per file.  A ``diffstat`` is especially useful
+on bigger patches.  Other comments relevant only to the moment or the
+maintainer, not suitable for the permanent changelog, should also go
+here.  A good example of such comments might be ``patch changelogs``
+which describe what has changed between the v1 and v2 version of the
+patch.
+
+If you are going to include a ``diffstat`` after the ``---`` marker, please
+use ``diffstat`` options ``-p 1 -w 70`` so that filenames are listed from
+the top of the kernel source tree and don't use too much horizontal
+space (easily fit in 80 columns, maybe with some indentation).  (``git``
+generates appropriate diffstats by default.)
+
+See more details on the proper patch format in the following
+references.
+
+.. _explicit_in_reply_to:
+
+Explicit In-Reply-To headers
+----------------------------
+
+It can be helpful to manually add In-Reply-To: headers to a patch
+(e.g., when using ``git send-email``) to associate the patch with
+previous relevant discussion, e.g. to link a bug fix to the email with
+the bug report.  However, for a multi-patch series, it is generally
+best to avoid using In-Reply-To: to link to older versions of the
+series.  This way multiple versions of the patch don't become an
+unmanageable forest of references in email clients.  If a link is
+helpful, you can use the https://lkml.kernel.org/ redirector (e.g., in
+the cover email text) to link to an earlier version of the patch series.
+
+
+Providing base tree information
+-------------------------------
+
+When other developers receive your patches and start the review process,
+it is often useful for them to know where in the tree history they
+should place your work. This is particularly useful for automated CI
+processes that attempt to run a series of tests in order to establish
+the quality of your submission before the maintainer starts the review.
+
+If you are using ``git format-patch`` to generate your patches, you can
+automatically include the base tree information in your submission by
+using the ``--base`` flag. The easiest and most convenient way to use
+this option is with topical branches::
+
+    $ git checkout -t -b my-topical-branch master
+    Branch 'my-topical-branch' set up to track local branch 'master'.
+    Switched to a new branch 'my-topical-branch'
+
+    [perform your edits and commits]
+
+    $ git format-patch --base=auto --cover-letter -o outgoing/ master
+    outgoing/0000-cover-letter.patch
+    outgoing/0001-First-Commit.patch
+    outgoing/...
+
+When you open ``outgoing/0000-cover-letter.patch`` for editing, you will
+notice that it will have the ``base-commit:`` trailer at the very
+bottom, which provides the reviewer and the CI tools enough information
+to properly perform ``git am`` without worrying about conflicts::
+
+    $ git checkout -b patch-review [base-commit-id]
+    Switched to a new branch 'patch-review'
+    $ git am patches.mbox
+    Applying: First Commit
+    Applying: ...
+
+Please see ``man git-format-patch`` for more information about this
+option.
+
+.. note::
+
+    The ``--base`` feature was introduced in git version 2.9.0.
+
+If you are not using git to format your patches, you can still include
+the same ``base-commit`` trailer to indicate the commit hash of the tree
+on which your work is based. You should add it either in the cover
+letter or in the first patch of the series and it should be placed
+either below the ``---`` line or at the very bottom of all other
+content, right before your email signature.
+
+
+References
+----------
+
+Andrew Morton, "The perfect patch" (tpp).
+  <https://www.ozlabs.org/~akpm/stuff/tpp.txt>
+
+Jeff Garzik, "Linux kernel patch submission format".
+  <https://web.archive.org/web/20180829112450/http://linux.yyz.us/patch-format.html>
+
+Greg Kroah-Hartman, "How to piss off a kernel subsystem maintainer".
+  <http://www.kroah.com/log/linux/maintainer.html>
+
+  <http://www.kroah.com/log/linux/maintainer-02.html>
+
+  <http://www.kroah.com/log/linux/maintainer-03.html>
+
+  <http://www.kroah.com/log/linux/maintainer-04.html>
+
+  <http://www.kroah.com/log/linux/maintainer-05.html>
+
+  <http://www.kroah.com/log/linux/maintainer-06.html>
+
+NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
+  <https://lkml.org/lkml/2005/7/11/336>
+
+Kernel Documentation/process/coding-style.rst:
+  :ref:`Documentation/process/coding-style.rst <codingstyle>`
+
+Linus Torvalds's mail on the canonical patch format:
+  <http://lkml.org/lkml/2005/4/7/183>
+
+Andi Kleen, "On submitting kernel patches"
+  Some strategies to get difficult or controversial changes in.
+
+  http://halobates.de/on-submitting-patches.pdf
diff --git a/Documentation/process/volatile-considered-harmful.rst b/Documentation/process/volatile-considered-harmful.rst
new file mode 100644
index 000000000..7eb6bd7c9
--- /dev/null
+++ b/Documentation/process/volatile-considered-harmful.rst
@@ -0,0 +1,125 @@
+
+.. _volatile_considered_harmful:
+
+Why the "volatile" type class should not be used
+------------------------------------------------
+
+C programmers have often taken volatile to mean that the variable could be
+changed outside of the current thread of execution; as a result, they are
+sometimes tempted to use it in kernel code when shared data structures are
+being used.  In other words, they have been known to treat volatile types
+as a sort of easy atomic variable, which they are not.  The use of volatile in
+kernel code is almost never correct; this document describes why.
+
+The key point to understand with regard to volatile is that its purpose is
+to suppress optimization, which is almost never what one really wants to
+do.  In the kernel, one must protect shared data structures against
+unwanted concurrent access, which is very much a different task.  The
+process of protecting against unwanted concurrency will also avoid almost
+all optimization-related problems in a more efficient way.
+
+Like volatile, the kernel primitives which make concurrent access to data
+safe (spinlocks, mutexes, memory barriers, etc.) are designed to prevent
+unwanted optimization.  If they are being used properly, there will be no
+need to use volatile as well.  If volatile is still necessary, there is
+almost certainly a bug in the code somewhere.  In properly-written kernel
+code, volatile can only serve to slow things down.
+
+Consider a typical block of kernel code::
+
+    spin_lock(&the_lock);
+    do_something_on(&shared_data);
+    do_something_else_with(&shared_data);
+    spin_unlock(&the_lock);
+
+If all the code follows the locking rules, the value of shared_data cannot
+change unexpectedly while the_lock is held.  Any other code which might
+want to play with that data will be waiting on the lock.  The spinlock
+primitives act as memory barriers - they are explicitly written to do so -
+meaning that data accesses will not be optimized across them.  So the
+compiler might think it knows what will be in shared_data, but the
+spin_lock() call, since it acts as a memory barrier, will force it to
+forget anything it knows.  There will be no optimization problems with
+accesses to that data.
+
+If shared_data were declared volatile, the locking would still be
+necessary.  But the compiler would also be prevented from optimizing access
+to shared_data _within_ the critical section, when we know that nobody else
+can be working with it.  While the lock is held, shared_data is not
+volatile.  When dealing with shared data, proper locking makes volatile
+unnecessary - and potentially harmful.
+
+The volatile storage class was originally meant for memory-mapped I/O
+registers.  Within the kernel, register accesses, too, should be protected
+by locks, but one also does not want the compiler "optimizing" register
+accesses within a critical section.  But, within the kernel, I/O memory
+accesses are always done through accessor functions; accessing I/O memory
+directly through pointers is frowned upon and does not work on all
+architectures.  Those accessors are written to prevent unwanted
+optimization, so, once again, volatile is unnecessary.
+
+Another situation where one might be tempted to use volatile is
+when the processor is busy-waiting on the value of a variable.  The right
+way to perform a busy wait is::
+
+    while (my_variable != what_i_want)
+        cpu_relax();
+
+The cpu_relax() call can lower CPU power consumption or yield to a
+hyperthreaded twin processor; it also happens to serve as a compiler
+barrier, so, once again, volatile is unnecessary.  Of course, busy-
+waiting is generally an anti-social act to begin with.
+
+There are still a few rare situations where volatile makes sense in the
+kernel:
+
+  - The above-mentioned accessor functions might use volatile on
+    architectures where direct I/O memory access does work.  Essentially,
+    each accessor call becomes a little critical section on its own and
+    ensures that the access happens as expected by the programmer.
+
+  - Inline assembly code which changes memory, but which has no other
+    visible side effects, risks being deleted by GCC.  Adding the volatile
+    keyword to asm statements will prevent this removal.
+
+  - The jiffies variable is special in that it can have a different value
+    every time it is referenced, but it can be read without any special
+    locking.  So jiffies can be volatile, but the addition of other
+    variables of this type is strongly frowned upon.  Jiffies is considered
+    to be a "stupid legacy" issue (Linus's words) in this regard; fixing it
+    would be more trouble than it is worth.
+
+  - Pointers to data structures in coherent memory which might be modified
+    by I/O devices can, sometimes, legitimately be volatile.  A ring buffer
+    used by a network adapter, where that adapter changes pointers to
+    indicate which descriptors have been processed, is an example of this
+    type of situation.
+
+For most code, none of the above justifications for volatile apply.  As a
+result, the use of volatile is likely to be seen as a bug and will bring
+additional scrutiny to the code.  Developers who are tempted to use
+volatile should take a step back and think about what they are truly trying
+to accomplish.
+
+Patches to remove volatile variables are generally welcome - as long as
+they come with a justification which shows that the concurrency issues have
+been properly thought through.
+
+
+References
+==========
+
+[1] https://lwn.net/Articles/233481/
+
+[2] https://lwn.net/Articles/233482/
+
+Credits
+=======
+
+Original impetus and research by Randy Dunlap
+
+Written by Jonathan Corbet
+
+Improvements via comments from Satyam Sharma, Johannes Stezenbach, Jesper
+Juhl, Heikki Orsila, H. Peter Anvin, Philipp Hahn, and Stefan
+Richter.