Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 478 insertions, 0 deletions

diff --git a/Documentation/s390/s390dbf.rst b/Documentation/s390/s390dbf.rst
new file mode 100644
index 000000000..af8bdc362
--- /dev/null
+++ b/Documentation/s390/s390dbf.rst
@@ -0,0 +1,478 @@
+==================
+S390 Debug Feature
+==================
+
+files:
+      - arch/s390/kernel/debug.c
+      - arch/s390/include/asm/debug.h
+
+Description:
+------------
+The goal of this feature is to provide a kernel debug logging API
+where log records can be stored efficiently in memory, where each component
+(e.g. device drivers) can have one separate debug log.
+One purpose of this is to inspect the debug logs after a production system crash
+in order to analyze the reason for the crash.
+
+If the system still runs but only a subcomponent which uses dbf fails,
+it is possible to look at the debug logs on a live system via the Linux
+debugfs filesystem.
+
+The debug feature may also very useful for kernel and driver development.
+
+Design:
+-------
+Kernel components (e.g. device drivers) can register themselves at the debug
+feature with the function call :c:func:`debug_register()`.
+This function initializes a
+debug log for the caller. For each debug log exists a number of debug areas
+where exactly one is active at one time.  Each debug area consists of contiguous
+pages in memory. In the debug areas there are stored debug entries (log records)
+which are written by event- and exception-calls.
+
+An event-call writes the specified debug entry to the active debug
+area and updates the log pointer for the active area. If the end
+of the active debug area is reached, a wrap around is done (ring buffer)
+and the next debug entry will be written at the beginning of the active
+debug area.
+
+An exception-call writes the specified debug entry to the log and
+switches to the next debug area. This is done in order to be sure
+that the records which describe the origin of the exception are not
+overwritten when a wrap around for the current area occurs.
+
+The debug areas themselves are also ordered in form of a ring buffer.
+When an exception is thrown in the last debug area, the following debug
+entries are then written again in the very first area.
+
+There are four versions for the event- and exception-calls: One for
+logging raw data, one for text, one for numbers (unsigned int and long),
+and one for sprintf-like formatted strings.
+
+Each debug entry contains the following data:
+
+- Timestamp
+- Cpu-Number of calling task
+- Level of debug entry (0...6)
+- Return Address to caller
+- Flag, if entry is an exception or not
+
+The debug logs can be inspected in a live system through entries in
+the debugfs-filesystem. Under the toplevel directory "``s390dbf``" there is
+a directory for each registered component, which is named like the
+corresponding component. The debugfs normally should be mounted to
+``/sys/kernel/debug`` therefore the debug feature can be accessed under
+``/sys/kernel/debug/s390dbf``.
+
+The content of the directories are files which represent different views
+to the debug log. Each component can decide which views should be
+used through registering them with the function :c:func:`debug_register_view()`.
+Predefined views for hex/ascii and sprintf data are provided.
+It is also possible to define other views. The content of
+a view can be inspected simply by reading the corresponding debugfs file.
+
+All debug logs have an actual debug level (range from 0 to 6).
+The default level is 3. Event and Exception functions have a :c:data:`level`
+parameter. Only debug entries with a level that is lower or equal
+than the actual level are written to the log. This means, when
+writing events, high priority log entries should have a low level
+value whereas low priority entries should have a high one.
+The actual debug level can be changed with the help of the debugfs-filesystem
+through writing a number string "x" to the ``level`` debugfs file which is
+provided for every debug log. Debugging can be switched off completely
+by using "-" on the ``level`` debugfs file.
+
+Example::
+
+	> echo "-" > /sys/kernel/debug/s390dbf/dasd/level
+
+It is also possible to deactivate the debug feature globally for every
+debug log. You can change the behavior using  2 sysctl parameters in
+``/proc/sys/s390dbf``:
+
+There are currently 2 possible triggers, which stop the debug feature
+globally. The first possibility is to use the ``debug_active`` sysctl. If
+set to 1 the debug feature is running. If ``debug_active`` is set to 0 the
+debug feature is turned off.
+
+The second trigger which stops the debug feature is a kernel oops.
+That prevents the debug feature from overwriting debug information that
+happened before the oops. After an oops you can reactivate the debug feature
+by piping 1 to ``/proc/sys/s390dbf/debug_active``. Nevertheless, it's not
+suggested to use an oopsed kernel in a production environment.
+
+If you want to disallow the deactivation of the debug feature, you can use
+the ``debug_stoppable`` sysctl. If you set ``debug_stoppable`` to 0 the debug
+feature cannot be stopped. If the debug feature is already stopped, it
+will stay deactivated.
+
+Kernel Interfaces:
+------------------
+
+.. kernel-doc:: arch/s390/kernel/debug.c
+.. kernel-doc:: arch/s390/include/asm/debug.h
+
+Predefined views:
+-----------------
+
+.. code-block:: c
+
+  extern struct debug_view debug_hex_ascii_view;
+
+  extern struct debug_view debug_sprintf_view;
+
+Examples
+--------
+
+.. code-block:: c
+
+  /*
+   * hex_ascii-view Example
+   */
+
+  #include <linux/init.h>
+  #include <asm/debug.h>
+
+  static debug_info_t *debug_info;
+
+  static int init(void)
+  {
+      /* register 4 debug areas with one page each and 4 byte data field */
+
+      debug_info = debug_register("test", 1, 4, 4 );
+      debug_register_view(debug_info, &debug_hex_ascii_view);
+
+      debug_text_event(debug_info, 4 , "one ");
+      debug_int_exception(debug_info, 4, 4711);
+      debug_event(debug_info, 3, &debug_info, 4);
+
+      return 0;
+  }
+
+  static void cleanup(void)
+  {
+      debug_unregister(debug_info);
+  }
+
+  module_init(init);
+  module_exit(cleanup);
+
+.. code-block:: c
+
+  /*
+   * sprintf-view Example
+   */
+
+  #include <linux/init.h>
+  #include <asm/debug.h>
+
+  static debug_info_t *debug_info;
+
+  static int init(void)
+  {
+      /* register 4 debug areas with one page each and data field for */
+      /* format string pointer + 2 varargs (= 3 * sizeof(long))       */
+
+      debug_info = debug_register("test", 1, 4, sizeof(long) * 3);
+      debug_register_view(debug_info, &debug_sprintf_view);
+
+      debug_sprintf_event(debug_info, 2 , "first event in %s:%i\n",__FILE__,__LINE__);
+      debug_sprintf_exception(debug_info, 1, "pointer to debug info: %p\n",&debug_info);
+
+      return 0;
+  }
+
+  static void cleanup(void)
+  {
+      debug_unregister(debug_info);
+  }
+
+  module_init(init);
+  module_exit(cleanup);
+
+Debugfs Interface
+-----------------
+Views to the debug logs can be investigated through reading the corresponding
+debugfs-files:
+
+Example::
+
+  > ls /sys/kernel/debug/s390dbf/dasd
+  flush  hex_ascii  level pages
+  > cat /sys/kernel/debug/s390dbf/dasd/hex_ascii | sort -k2,2 -s
+  00 00974733272:680099 2 - 02 0006ad7e  07 ea 4a 90 | ....
+  00 00974733272:682210 2 - 02 0006ade6  46 52 45 45 | FREE
+  00 00974733272:682213 2 - 02 0006adf6  07 ea 4a 90 | ....
+  00 00974733272:682281 1 * 02 0006ab08  41 4c 4c 43 | EXCP
+  01 00974733272:682284 2 - 02 0006ab16  45 43 4b 44 | ECKD
+  01 00974733272:682287 2 - 02 0006ab28  00 00 00 04 | ....
+  01 00974733272:682289 2 - 02 0006ab3e  00 00 00 20 | ...
+  01 00974733272:682297 2 - 02 0006ad7e  07 ea 4a 90 | ....
+  01 00974733272:684384 2 - 00 0006ade6  46 52 45 45 | FREE
+  01 00974733272:684388 2 - 00 0006adf6  07 ea 4a 90 | ....
+
+See section about predefined views for explanation of the above output!
+
+Changing the debug level
+------------------------
+
+Example::
+
+
+  > cat /sys/kernel/debug/s390dbf/dasd/level
+  3
+  > echo "5" > /sys/kernel/debug/s390dbf/dasd/level
+  > cat /sys/kernel/debug/s390dbf/dasd/level
+  5
+
+Flushing debug areas
+--------------------
+Debug areas can be flushed with piping the number of the desired
+area (0...n) to the debugfs file "flush". When using "-" all debug areas
+are flushed.
+
+Examples:
+
+1. Flush debug area 0::
+
+     > echo "0" > /sys/kernel/debug/s390dbf/dasd/flush
+
+2. Flush all debug areas::
+
+     > echo "-" > /sys/kernel/debug/s390dbf/dasd/flush
+
+Changing the size of debug areas
+------------------------------------
+It is possible the change the size of debug areas through piping
+the number of pages to the debugfs file "pages". The resize request will
+also flush the debug areas.
+
+Example:
+
+Define 4 pages for the debug areas of debug feature "dasd"::
+
+  > echo "4" > /sys/kernel/debug/s390dbf/dasd/pages
+
+Stopping the debug feature
+--------------------------
+Example:
+
+1. Check if stopping is allowed::
+
+     > cat /proc/sys/s390dbf/debug_stoppable
+
+2. Stop debug feature::
+
+     > echo 0 > /proc/sys/s390dbf/debug_active
+
+crash Interface
+----------------
+The ``crash`` tool since v5.1.0 has a built-in command
+``s390dbf`` to display all the debug logs or export them to the file system.
+With this tool it is possible
+to investigate the debug logs on a live system and with a memory dump after
+a system crash.
+
+Investigating raw memory
+------------------------
+One last possibility to investigate the debug logs at a live
+system and after a system crash is to look at the raw memory
+under VM or at the Service Element.
+It is possible to find the anchor of the debug-logs through
+the ``debug_area_first`` symbol in the System map. Then one has
+to follow the correct pointers of the data-structures defined
+in debug.h and find the debug-areas in memory.
+Normally modules which use the debug feature will also have
+a global variable with the pointer to the debug-logs. Following
+this pointer it will also be possible to find the debug logs in
+memory.
+
+For this method it is recommended to use '16 * x + 4' byte (x = 0..n)
+for the length of the data field in :c:func:`debug_register()` in
+order to see the debug entries well formatted.
+
+
+Predefined Views
+----------------
+
+There are two predefined views: hex_ascii and sprintf.
+The hex_ascii view shows the data field in hex and ascii representation
+(e.g. ``45 43 4b 44 | ECKD``).
+
+The sprintf view formats the debug entries in the same way as the sprintf
+function would do. The sprintf event/exception functions write to the
+debug entry a pointer to the format string (size = sizeof(long))
+and for each vararg a long value. So e.g. for a debug entry with a format
+string plus two varargs one would need to allocate a (3 * sizeof(long))
+byte data area in the debug_register() function.
+
+IMPORTANT:
+  Using "%s" in sprintf event functions is dangerous. You can only
+  use "%s" in the sprintf event functions, if the memory for the passed string
+  is available as long as the debug feature exists. The reason behind this is
+  that due to performance considerations only a pointer to the string is stored
+  in  the debug feature. If you log a string that is freed afterwards, you will
+  get an OOPS when inspecting the debug feature, because then the debug feature
+  will access the already freed memory.
+
+NOTE:
+  If using the sprintf view do NOT use other event/exception functions
+  than the sprintf-event and -exception functions.
+
+The format of the hex_ascii and sprintf view is as follows:
+
+- Number of area
+- Timestamp (formatted as seconds and microseconds since 00:00:00 Coordinated
+  Universal Time (UTC), January 1, 1970)
+- level of debug entry
+- Exception flag (* = Exception)
+- Cpu-Number of calling task
+- Return Address to caller
+- data field
+
+A typical line of the hex_ascii view will look like the following (first line
+is only for explanation and will not be displayed when 'cating' the view)::
+
+  area  time           level exception cpu caller    data (hex + ascii)
+  --------------------------------------------------------------------------
+  00    00964419409:440690 1 -         00  88023fe
+
+
+Defining views
+--------------
+
+Views are specified with the 'debug_view' structure. There are defined
+callback functions which are used for reading and writing the debugfs files:
+
+.. code-block:: c
+
+  struct debug_view {
+	char name[DEBUG_MAX_PROCF_LEN];
+	debug_prolog_proc_t* prolog_proc;
+	debug_header_proc_t* header_proc;
+	debug_format_proc_t* format_proc;
+	debug_input_proc_t*  input_proc;
+	void*                private_data;
+  };
+
+where:
+
+.. code-block:: c
+
+  typedef int (debug_header_proc_t) (debug_info_t* id,
+				     struct debug_view* view,
+				     int area,
+				     debug_entry_t* entry,
+				     char* out_buf);
+
+  typedef int (debug_format_proc_t) (debug_info_t* id,
+				     struct debug_view* view, char* out_buf,
+				     const char* in_buf);
+  typedef int (debug_prolog_proc_t) (debug_info_t* id,
+				     struct debug_view* view,
+				     char* out_buf);
+  typedef int (debug_input_proc_t) (debug_info_t* id,
+				    struct debug_view* view,
+				    struct file* file, const char* user_buf,
+				    size_t in_buf_size, loff_t* offset);
+
+
+The "private_data" member can be used as pointer to view specific data.
+It is not used by the debug feature itself.
+
+The output when reading a debugfs file is structured like this::
+
+  "prolog_proc output"
+
+  "header_proc output 1"  "format_proc output 1"
+  "header_proc output 2"  "format_proc output 2"
+  "header_proc output 3"  "format_proc output 3"
+  ...
+
+When a view is read from the debugfs, the Debug Feature calls the
+'prolog_proc' once for writing the prolog.
+Then 'header_proc' and 'format_proc' are called for each
+existing debug entry.
+
+The input_proc can be used to implement functionality when it is written to
+the view (e.g. like with ``echo "0" > /sys/kernel/debug/s390dbf/dasd/level``).
+
+For header_proc there can be used the default function
+:c:func:`debug_dflt_header_fn()` which is defined in debug.h.
+and which produces the same header output as the predefined views.
+E.g::
+
+  00 00964419409:440761 2 - 00 88023ec
+
+In order to see how to use the callback functions check the implementation
+of the default views!
+
+Example:
+
+.. code-block:: c
+
+  #include <asm/debug.h>
+
+  #define UNKNOWNSTR "data: %08x"
+
+  const char* messages[] =
+  {"This error...........\n",
+   "That error...........\n",
+   "Problem..............\n",
+   "Something went wrong.\n",
+   "Everything ok........\n",
+   NULL
+  };
+
+  static int debug_test_format_fn(
+     debug_info_t *id, struct debug_view *view,
+     char *out_buf, const char *in_buf
+  )
+  {
+    int i, rc = 0;
+
+    if (id->buf_size >= 4) {
+       int msg_nr = *((int*)in_buf);
+       if (msg_nr < sizeof(messages) / sizeof(char*) - 1)
+	  rc += sprintf(out_buf, "%s", messages[msg_nr]);
+       else
+	  rc += sprintf(out_buf, UNKNOWNSTR, msg_nr);
+    }
+    return rc;
+  }
+
+  struct debug_view debug_test_view = {
+    "myview",                 /* name of view */
+    NULL,                     /* no prolog */
+    &debug_dflt_header_fn,    /* default header for each entry */
+    &debug_test_format_fn,    /* our own format function */
+    NULL,                     /* no input function */
+    NULL                      /* no private data */
+  };
+
+test:
+=====
+
+.. code-block:: c
+
+  debug_info_t *debug_info;
+  int i;
+  ...
+  debug_info = debug_register("test", 0, 4, 4);
+  debug_register_view(debug_info, &debug_test_view);
+  for (i = 0; i < 10; i ++)
+    debug_int_event(debug_info, 1, i);
+
+::
+
+  > cat /sys/kernel/debug/s390dbf/test/myview
+  00 00964419734:611402 1 - 00 88042ca   This error...........
+  00 00964419734:611405 1 - 00 88042ca   That error...........
+  00 00964419734:611408 1 - 00 88042ca   Problem..............
+  00 00964419734:611411 1 - 00 88042ca   Something went wrong.
+  00 00964419734:611414 1 - 00 88042ca   Everything ok........
+  00 00964419734:611417 1 - 00 88042ca   data: 00000005
+  00 00964419734:611419 1 - 00 88042ca   data: 00000006
+  00 00964419734:611422 1 - 00 88042ca   data: 00000007
+  00 00964419734:611425 1 - 00 88042ca   data: 00000008
+  00 00964419734:611428 1 - 00 88042ca   data: 00000009