diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/userspace-api/media/v4l/dev-decoder.rst | |
parent | Initial commit. (diff) | |
download | linux-430c2fc249ea5c0536abd21c23382884005c9093.tar.xz linux-430c2fc249ea5c0536abd21c23382884005c9093.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/userspace-api/media/v4l/dev-decoder.rst')
-rw-r--r-- | Documentation/userspace-api/media/v4l/dev-decoder.rst | 1103 |
1 files changed, 1103 insertions, 0 deletions
diff --git a/Documentation/userspace-api/media/v4l/dev-decoder.rst b/Documentation/userspace-api/media/v4l/dev-decoder.rst new file mode 100644 index 000000000..3d4138a4b --- /dev/null +++ b/Documentation/userspace-api/media/v4l/dev-decoder.rst @@ -0,0 +1,1103 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _decoder: + +************************************************* +Memory-to-Memory Stateful Video Decoder Interface +************************************************* + +A stateful video decoder takes complete chunks of the bytestream (e.g. Annex-B +H.264/HEVC stream, raw VP8/9 stream) and decodes them into raw video frames in +display order. The decoder is expected not to require any additional information +from the client to process these buffers. + +Performing software parsing, processing etc. of the stream in the driver in +order to support this interface is strongly discouraged. In case such +operations are needed, use of the Stateless Video Decoder Interface (in +development) is strongly advised. + +Conventions and Notations Used in This Document +=============================================== + +1. The general V4L2 API rules apply if not specified in this document + otherwise. + +2. The meaning of words "must", "may", "should", etc. is as per `RFC + 2119 <https://tools.ietf.org/html/rfc2119>`_. + +3. All steps not marked "optional" are required. + +4. :c:func:`VIDIOC_G_EXT_CTRLS` and :c:func:`VIDIOC_S_EXT_CTRLS` may be used + interchangeably with :c:func:`VIDIOC_G_CTRL` and :c:func:`VIDIOC_S_CTRL`, + unless specified otherwise. + +5. Single-planar API (see :ref:`planar-apis`) and applicable structures may be + used interchangeably with multi-planar API, unless specified otherwise, + depending on decoder capabilities and following the general V4L2 guidelines. + +6. i = [a..b]: sequence of integers from a to b, inclusive, i.e. i = + [0..2]: i = 0, 1, 2. + +7. Given an ``OUTPUT`` buffer A, then A’ represents a buffer on the ``CAPTURE`` + queue containing data that resulted from processing buffer A. + +.. _decoder-glossary: + +Glossary +======== + +CAPTURE + the destination buffer queue; for decoders, the queue of buffers containing + decoded frames; for encoders, the queue of buffers containing an encoded + bytestream; ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` or + ``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``; data is captured from the hardware + into ``CAPTURE`` buffers. + +client + the application communicating with the decoder or encoder implementing + this interface. + +coded format + encoded/compressed video bytestream format (e.g. H.264, VP8, etc.); see + also: raw format. + +coded height + height for given coded resolution. + +coded resolution + stream resolution in pixels aligned to codec and hardware requirements; + typically visible resolution rounded up to full macroblocks; + see also: visible resolution. + +coded width + width for given coded resolution. + +decode order + the order in which frames are decoded; may differ from display order if the + coded format includes a feature of frame reordering; for decoders, + ``OUTPUT`` buffers must be queued by the client in decode order; for + encoders ``CAPTURE`` buffers must be returned by the encoder in decode order. + +destination + data resulting from the decode process; see ``CAPTURE``. + +display order + the order in which frames must be displayed; for encoders, ``OUTPUT`` + buffers must be queued by the client in display order; for decoders, + ``CAPTURE`` buffers must be returned by the decoder in display order. + +DPB + Decoded Picture Buffer; an H.264/HEVC term for a buffer that stores a decoded + raw frame available for reference in further decoding steps. + +EOS + end of stream. + +IDR + Instantaneous Decoder Refresh; a type of a keyframe in an H.264/HEVC-encoded + stream, which clears the list of earlier reference frames (DPBs). + +keyframe + an encoded frame that does not reference frames decoded earlier, i.e. + can be decoded fully on its own. + +macroblock + a processing unit in image and video compression formats based on linear + block transforms (e.g. H.264, VP8, VP9); codec-specific, but for most of + popular codecs the size is 16x16 samples (pixels). + +OUTPUT + the source buffer queue; for decoders, the queue of buffers containing + an encoded bytestream; for encoders, the queue of buffers containing raw + frames; ``V4L2_BUF_TYPE_VIDEO_OUTPUT`` or + ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``; the hardware is fed with data + from ``OUTPUT`` buffers. + +PPS + Picture Parameter Set; a type of metadata entity in an H.264/HEVC bytestream. + +raw format + uncompressed format containing raw pixel data (e.g. YUV, RGB formats). + +resume point + a point in the bytestream from which decoding may start/continue, without + any previous state/data present, e.g.: a keyframe (VP8/VP9) or + SPS/PPS/IDR sequence (H.264/HEVC); a resume point is required to start decode + of a new stream, or to resume decoding after a seek. + +source + data fed to the decoder or encoder; see ``OUTPUT``. + +source height + height in pixels for given source resolution; relevant to encoders only. + +source resolution + resolution in pixels of source frames being source to the encoder and + subject to further cropping to the bounds of visible resolution; relevant to + encoders only. + +source width + width in pixels for given source resolution; relevant to encoders only. + +SPS + Sequence Parameter Set; a type of metadata entity in an H.264/HEVC bytestream. + +stream metadata + additional (non-visual) information contained inside encoded bytestream; + for example: coded resolution, visible resolution, codec profile. + +visible height + height for given visible resolution; display height. + +visible resolution + stream resolution of the visible picture, in pixels, to be used for + display purposes; must be smaller or equal to coded resolution; + display resolution. + +visible width + width for given visible resolution; display width. + +State Machine +============= + +.. kernel-render:: DOT + :alt: DOT digraph of decoder state machine + :caption: Decoder State Machine + + digraph decoder_state_machine { + node [shape = doublecircle, label="Decoding"] Decoding; + + node [shape = circle, label="Initialization"] Initialization; + node [shape = circle, label="Capture\nsetup"] CaptureSetup; + node [shape = circle, label="Dynamic\nResolution\nChange"] ResChange; + node [shape = circle, label="Stopped"] Stopped; + node [shape = circle, label="Drain"] Drain; + node [shape = circle, label="Seek"] Seek; + node [shape = circle, label="End of Stream"] EoS; + + node [shape = point]; qi + qi -> Initialization [ label = "open()" ]; + + Initialization -> CaptureSetup [ label = "CAPTURE\nformat\nestablished" ]; + + CaptureSetup -> Stopped [ label = "CAPTURE\nbuffers\nready" ]; + + Decoding -> ResChange [ label = "Stream\nresolution\nchange" ]; + Decoding -> Drain [ label = "V4L2_DEC_CMD_STOP" ]; + Decoding -> EoS [ label = "EoS mark\nin the stream" ]; + Decoding -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ]; + Decoding -> Stopped [ label = "VIDIOC_STREAMOFF(CAPTURE)" ]; + Decoding -> Decoding; + + ResChange -> CaptureSetup [ label = "CAPTURE\nformat\nestablished" ]; + ResChange -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ]; + + EoS -> Drain [ label = "Implicit\ndrain" ]; + + Drain -> Stopped [ label = "All CAPTURE\nbuffers dequeued\nor\nVIDIOC_STREAMOFF(CAPTURE)" ]; + Drain -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ]; + + Seek -> Decoding [ label = "VIDIOC_STREAMON(OUTPUT)" ]; + Seek -> Initialization [ label = "VIDIOC_REQBUFS(OUTPUT, 0)" ]; + + Stopped -> Decoding [ label = "V4L2_DEC_CMD_START\nor\nVIDIOC_STREAMON(CAPTURE)" ]; + Stopped -> Seek [ label = "VIDIOC_STREAMOFF(OUTPUT)" ]; + } + +Querying Capabilities +===================== + +1. To enumerate the set of coded formats supported by the decoder, the + client may call :c:func:`VIDIOC_ENUM_FMT` on ``OUTPUT``. + + * The full set of supported formats will be returned, regardless of the + format set on ``CAPTURE``. + * Check the flags field of :c:type:`v4l2_fmtdesc` for more information + about the decoder's capabilities with respect to each coded format. + In particular whether or not the decoder has a full-fledged bytestream + parser and if the decoder supports dynamic resolution changes. + +2. To enumerate the set of supported raw formats, the client may call + :c:func:`VIDIOC_ENUM_FMT` on ``CAPTURE``. + + * Only the formats supported for the format currently active on ``OUTPUT`` + will be returned. + + * In order to enumerate raw formats supported by a given coded format, + the client must first set that coded format on ``OUTPUT`` and then + enumerate formats on ``CAPTURE``. + +3. The client may use :c:func:`VIDIOC_ENUM_FRAMESIZES` to detect supported + resolutions for a given format, passing desired pixel format in + :c:type:`v4l2_frmsizeenum` ``pixel_format``. + + * Values returned by :c:func:`VIDIOC_ENUM_FRAMESIZES` for a coded pixel + format will include all possible coded resolutions supported by the + decoder for given coded pixel format. + + * Values returned by :c:func:`VIDIOC_ENUM_FRAMESIZES` for a raw pixel format + will include all possible frame buffer resolutions supported by the + decoder for given raw pixel format and the coded format currently set on + ``OUTPUT``. + +4. Supported profiles and levels for the coded format currently set on + ``OUTPUT``, if applicable, may be queried using their respective controls + via :c:func:`VIDIOC_QUERYCTRL`. + +Initialization +============== + +1. Set the coded format on ``OUTPUT`` via :c:func:`VIDIOC_S_FMT`. + + * **Required fields:** + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``. + + ``pixelformat`` + a coded pixel format. + + ``width``, ``height`` + coded resolution of the stream; required only if it cannot be parsed + from the stream for the given coded format; otherwise the decoder will + use this resolution as a placeholder resolution that will likely change + as soon as it can parse the actual coded resolution from the stream. + + ``sizeimage`` + desired size of ``OUTPUT`` buffers; the decoder may adjust it to + match hardware requirements. + + other fields + follow standard semantics. + + * **Return fields:** + + ``sizeimage`` + adjusted size of ``OUTPUT`` buffers. + + * The ``CAPTURE`` format will be updated with an appropriate frame buffer + resolution instantly based on the width and height returned by + :c:func:`VIDIOC_S_FMT`. + However, for coded formats that include stream resolution information, + after the decoder is done parsing the information from the stream, it will + update the ``CAPTURE`` format with new values and signal a source change + event, regardless of whether they match the values set by the client or + not. + + .. important:: + + Changing the ``OUTPUT`` format may change the currently set ``CAPTURE`` + format. How the new ``CAPTURE`` format is determined is up to the decoder + and the client must ensure it matches its needs afterwards. + +2. Allocate source (bytestream) buffers via :c:func:`VIDIOC_REQBUFS` on + ``OUTPUT``. + + * **Required fields:** + + ``count`` + requested number of buffers to allocate; greater than zero. + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``. + + ``memory`` + follows standard semantics. + + * **Return fields:** + + ``count`` + the actual number of buffers allocated. + + .. warning:: + + The actual number of allocated buffers may differ from the ``count`` + given. The client must check the updated value of ``count`` after the + call returns. + + Alternatively, :c:func:`VIDIOC_CREATE_BUFS` on the ``OUTPUT`` queue can be + used to have more control over buffer allocation. + + * **Required fields:** + + ``count`` + requested number of buffers to allocate; greater than zero. + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``. + + ``memory`` + follows standard semantics. + + ``format`` + follows standard semantics. + + * **Return fields:** + + ``count`` + adjusted to the number of allocated buffers. + + .. warning:: + + The actual number of allocated buffers may differ from the ``count`` + given. The client must check the updated value of ``count`` after the + call returns. + +3. Start streaming on the ``OUTPUT`` queue via :c:func:`VIDIOC_STREAMON`. + +4. **This step only applies to coded formats that contain resolution information + in the stream.** Continue queuing/dequeuing bytestream buffers to/from the + ``OUTPUT`` queue via :c:func:`VIDIOC_QBUF` and :c:func:`VIDIOC_DQBUF`. The + buffers will be processed and returned to the client in order, until + required metadata to configure the ``CAPTURE`` queue are found. This is + indicated by the decoder sending a ``V4L2_EVENT_SOURCE_CHANGE`` event with + ``changes`` set to ``V4L2_EVENT_SRC_CH_RESOLUTION``. + + * It is not an error if the first buffer does not contain enough data for + this to occur. Processing of the buffers will continue as long as more + data is needed. + + * If data in a buffer that triggers the event is required to decode the + first frame, it will not be returned to the client, until the + initialization sequence completes and the frame is decoded. + + * If the client has not set the coded resolution of the stream on its own, + calling :c:func:`VIDIOC_G_FMT`, :c:func:`VIDIOC_S_FMT`, + :c:func:`VIDIOC_TRY_FMT` or :c:func:`VIDIOC_REQBUFS` on the ``CAPTURE`` + queue will not return the real values for the stream until a + ``V4L2_EVENT_SOURCE_CHANGE`` event with ``changes`` set to + ``V4L2_EVENT_SRC_CH_RESOLUTION`` is signaled. + + .. important:: + + Any client query issued after the decoder queues the event will return + values applying to the just parsed stream, including queue formats, + selection rectangles and controls. + + .. note:: + + A client capable of acquiring stream parameters from the bytestream on + its own may attempt to set the width and height of the ``OUTPUT`` format + to non-zero values matching the coded size of the stream, skip this step + and continue with the `Capture Setup` sequence. However, it must not + rely on any driver queries regarding stream parameters, such as + selection rectangles and controls, since the decoder has not parsed them + from the stream yet. If the values configured by the client do not match + those parsed by the decoder, a `Dynamic Resolution Change` will be + triggered to reconfigure them. + + .. note:: + + No decoded frames are produced during this phase. + +5. Continue with the `Capture Setup` sequence. + +Capture Setup +============= + +1. Call :c:func:`VIDIOC_G_FMT` on the ``CAPTURE`` queue to get format for the + destination buffers parsed/decoded from the bytestream. + + * **Required fields:** + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``. + + * **Return fields:** + + ``width``, ``height`` + frame buffer resolution for the decoded frames. + + ``pixelformat`` + pixel format for decoded frames. + + ``num_planes`` (for _MPLANE ``type`` only) + number of planes for pixelformat. + + ``sizeimage``, ``bytesperline`` + as per standard semantics; matching frame buffer format. + + .. note:: + + The value of ``pixelformat`` may be any pixel format supported by the + decoder for the current stream. The decoder should choose a + preferred/optimal format for the default configuration. For example, a + YUV format may be preferred over an RGB format if an additional + conversion step would be required for the latter. + +2. **Optional.** Acquire the visible resolution via + :c:func:`VIDIOC_G_SELECTION`. + + * **Required fields:** + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``. + + ``target`` + set to ``V4L2_SEL_TGT_COMPOSE``. + + * **Return fields:** + + ``r.left``, ``r.top``, ``r.width``, ``r.height`` + the visible rectangle; it must fit within the frame buffer resolution + returned by :c:func:`VIDIOC_G_FMT` on ``CAPTURE``. + + * The following selection targets are supported on ``CAPTURE``: + + ``V4L2_SEL_TGT_CROP_BOUNDS`` + corresponds to the coded resolution of the stream. + + ``V4L2_SEL_TGT_CROP_DEFAULT`` + the rectangle covering the part of the ``CAPTURE`` buffer that + contains meaningful picture data (visible area); width and height + will be equal to the visible resolution of the stream. + + ``V4L2_SEL_TGT_CROP`` + the rectangle within the coded resolution to be output to + ``CAPTURE``; defaults to ``V4L2_SEL_TGT_CROP_DEFAULT``; read-only on + hardware without additional compose/scaling capabilities. + + ``V4L2_SEL_TGT_COMPOSE_BOUNDS`` + the maximum rectangle within a ``CAPTURE`` buffer, which the cropped + frame can be composed into; equal to ``V4L2_SEL_TGT_CROP`` if the + hardware does not support compose/scaling. + + ``V4L2_SEL_TGT_COMPOSE_DEFAULT`` + equal to ``V4L2_SEL_TGT_CROP``. + + ``V4L2_SEL_TGT_COMPOSE`` + the rectangle inside a ``CAPTURE`` buffer into which the cropped + frame is written; defaults to ``V4L2_SEL_TGT_COMPOSE_DEFAULT``; + read-only on hardware without additional compose/scaling capabilities. + + ``V4L2_SEL_TGT_COMPOSE_PADDED`` + the rectangle inside a ``CAPTURE`` buffer which is overwritten by the + hardware; equal to ``V4L2_SEL_TGT_COMPOSE`` if the hardware does not + write padding pixels. + + .. warning:: + + The values are guaranteed to be meaningful only after the decoder + successfully parses the stream metadata. The client must not rely on the + query before that happens. + +3. **Optional.** Enumerate ``CAPTURE`` formats via :c:func:`VIDIOC_ENUM_FMT` on + the ``CAPTURE`` queue. Once the stream information is parsed and known, the + client may use this ioctl to discover which raw formats are supported for + given stream and select one of them via :c:func:`VIDIOC_S_FMT`. + + .. important:: + + The decoder will return only formats supported for the currently + established coded format, as per the ``OUTPUT`` format and/or stream + metadata parsed in this initialization sequence, even if more formats + may be supported by the decoder in general. In other words, the set + returned will be a subset of the initial query mentioned in the + `Querying Capabilities` section. + + For example, a decoder may support YUV and RGB formats for resolutions + 1920x1088 and lower, but only YUV for higher resolutions (due to + hardware limitations). After parsing a resolution of 1920x1088 or lower, + :c:func:`VIDIOC_ENUM_FMT` may return a set of YUV and RGB pixel formats, + but after parsing resolution higher than 1920x1088, the decoder will not + return RGB, unsupported for this resolution. + + However, subsequent resolution change event triggered after + discovering a resolution change within the same stream may switch + the stream into a lower resolution and :c:func:`VIDIOC_ENUM_FMT` + would return RGB formats again in that case. + +4. **Optional.** Set the ``CAPTURE`` format via :c:func:`VIDIOC_S_FMT` on the + ``CAPTURE`` queue. The client may choose a different format than + selected/suggested by the decoder in :c:func:`VIDIOC_G_FMT`. + + * **Required fields:** + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``. + + ``pixelformat`` + a raw pixel format. + + ``width``, ``height`` + frame buffer resolution of the decoded stream; typically unchanged from + what was returned with :c:func:`VIDIOC_G_FMT`, but it may be different + if the hardware supports composition and/or scaling. + + * Setting the ``CAPTURE`` format will reset the compose selection rectangles + to their default values, based on the new resolution, as described in the + previous step. + +5. **Optional.** Set the compose rectangle via :c:func:`VIDIOC_S_SELECTION` on + the ``CAPTURE`` queue if it is desired and if the decoder has compose and/or + scaling capabilities. + + * **Required fields:** + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``. + + ``target`` + set to ``V4L2_SEL_TGT_COMPOSE``. + + ``r.left``, ``r.top``, ``r.width``, ``r.height`` + the rectangle inside a ``CAPTURE`` buffer into which the cropped + frame is written; defaults to ``V4L2_SEL_TGT_COMPOSE_DEFAULT``; + read-only on hardware without additional compose/scaling capabilities. + + * **Return fields:** + + ``r.left``, ``r.top``, ``r.width``, ``r.height`` + the visible rectangle; it must fit within the frame buffer resolution + returned by :c:func:`VIDIOC_G_FMT` on ``CAPTURE``. + + .. warning:: + + The decoder may adjust the compose rectangle to the nearest + supported one to meet codec and hardware requirements. The client needs + to check the adjusted rectangle returned by :c:func:`VIDIOC_S_SELECTION`. + +6. If all the following conditions are met, the client may resume the decoding + instantly: + + * ``sizeimage`` of the new format (determined in previous steps) is less + than or equal to the size of currently allocated buffers, + + * the number of buffers currently allocated is greater than or equal to the + minimum number of buffers acquired in previous steps. To fulfill this + requirement, the client may use :c:func:`VIDIOC_CREATE_BUFS` to add new + buffers. + + In that case, the remaining steps do not apply and the client may resume + the decoding by one of the following actions: + + * if the ``CAPTURE`` queue is streaming, call :c:func:`VIDIOC_DECODER_CMD` + with the ``V4L2_DEC_CMD_START`` command, + + * if the ``CAPTURE`` queue is not streaming, call :c:func:`VIDIOC_STREAMON` + on the ``CAPTURE`` queue. + + However, if the client intends to change the buffer set, to lower + memory usage or for any other reasons, it may be achieved by following + the steps below. + +7. **If the** ``CAPTURE`` **queue is streaming,** keep queuing and dequeuing + buffers on the ``CAPTURE`` queue until a buffer marked with the + ``V4L2_BUF_FLAG_LAST`` flag is dequeued. + +8. **If the** ``CAPTURE`` **queue is streaming,** call :c:func:`VIDIOC_STREAMOFF` + on the ``CAPTURE`` queue to stop streaming. + + .. warning:: + + The ``OUTPUT`` queue must remain streaming. Calling + :c:func:`VIDIOC_STREAMOFF` on it would abort the sequence and trigger a + seek. + +9. **If the** ``CAPTURE`` **queue has buffers allocated,** free the ``CAPTURE`` + buffers using :c:func:`VIDIOC_REQBUFS`. + + * **Required fields:** + + ``count`` + set to 0. + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``. + + ``memory`` + follows standard semantics. + +10. Allocate ``CAPTURE`` buffers via :c:func:`VIDIOC_REQBUFS` on the + ``CAPTURE`` queue. + + * **Required fields:** + + ``count`` + requested number of buffers to allocate; greater than zero. + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``. + + ``memory`` + follows standard semantics. + + * **Return fields:** + + ``count`` + actual number of buffers allocated. + + .. warning:: + + The actual number of allocated buffers may differ from the ``count`` + given. The client must check the updated value of ``count`` after the + call returns. + + .. note:: + + To allocate more than the minimum number of buffers (for pipeline + depth), the client may query the ``V4L2_CID_MIN_BUFFERS_FOR_CAPTURE`` + control to get the minimum number of buffers required, and pass the + obtained value plus the number of additional buffers needed in the + ``count`` field to :c:func:`VIDIOC_REQBUFS`. + + Alternatively, :c:func:`VIDIOC_CREATE_BUFS` on the ``CAPTURE`` queue can be + used to have more control over buffer allocation. For example, by + allocating buffers larger than the current ``CAPTURE`` format, future + resolution changes can be accommodated. + + * **Required fields:** + + ``count`` + requested number of buffers to allocate; greater than zero. + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``CAPTURE``. + + ``memory`` + follows standard semantics. + + ``format`` + a format representing the maximum framebuffer resolution to be + accommodated by newly allocated buffers. + + * **Return fields:** + + ``count`` + adjusted to the number of allocated buffers. + + .. warning:: + + The actual number of allocated buffers may differ from the ``count`` + given. The client must check the updated value of ``count`` after the + call returns. + + .. note:: + + To allocate buffers for a format different than parsed from the stream + metadata, the client must proceed as follows, before the metadata + parsing is initiated: + + * set width and height of the ``OUTPUT`` format to desired coded resolution to + let the decoder configure the ``CAPTURE`` format appropriately, + + * query the ``CAPTURE`` format using :c:func:`VIDIOC_G_FMT` and save it + until this step. + + The format obtained in the query may be then used with + :c:func:`VIDIOC_CREATE_BUFS` in this step to allocate the buffers. + +11. Call :c:func:`VIDIOC_STREAMON` on the ``CAPTURE`` queue to start decoding + frames. + +Decoding +======== + +This state is reached after the `Capture Setup` sequence finishes successfully. +In this state, the client queues and dequeues buffers to both queues via +:c:func:`VIDIOC_QBUF` and :c:func:`VIDIOC_DQBUF`, following the standard +semantics. + +The content of the source ``OUTPUT`` buffers depends on the active coded pixel +format and may be affected by codec-specific extended controls, as stated in +the documentation of each format. + +Both queues operate independently, following the standard behavior of V4L2 +buffer queues and memory-to-memory devices. In addition, the order of decoded +frames dequeued from the ``CAPTURE`` queue may differ from the order of queuing +coded frames to the ``OUTPUT`` queue, due to properties of the selected coded +format, e.g. frame reordering. + +The client must not assume any direct relationship between ``CAPTURE`` +and ``OUTPUT`` buffers and any specific timing of buffers becoming +available to dequeue. Specifically: + +* a buffer queued to ``OUTPUT`` may result in no buffers being produced + on ``CAPTURE`` (e.g. if it does not contain encoded data, or if only + metadata syntax structures are present in it), + +* a buffer queued to ``OUTPUT`` may result in more than one buffer produced + on ``CAPTURE`` (if the encoded data contained more than one frame, or if + returning a decoded frame allowed the decoder to return a frame that + preceded it in decode, but succeeded it in the display order), + +* a buffer queued to ``OUTPUT`` may result in a buffer being produced on + ``CAPTURE`` later into decode process, and/or after processing further + ``OUTPUT`` buffers, or be returned out of order, e.g. if display + reordering is used, + +* buffers may become available on the ``CAPTURE`` queue without additional + buffers queued to ``OUTPUT`` (e.g. during drain or ``EOS``), because of the + ``OUTPUT`` buffers queued in the past whose decoding results are only + available at later time, due to specifics of the decoding process. + +.. note:: + + To allow matching decoded ``CAPTURE`` buffers with ``OUTPUT`` buffers they + originated from, the client can set the ``timestamp`` field of the + :c:type:`v4l2_buffer` struct when queuing an ``OUTPUT`` buffer. The + ``CAPTURE`` buffer(s), which resulted from decoding that ``OUTPUT`` buffer + will have their ``timestamp`` field set to the same value when dequeued. + + In addition to the straightforward case of one ``OUTPUT`` buffer producing + one ``CAPTURE`` buffer, the following cases are defined: + + * one ``OUTPUT`` buffer generates multiple ``CAPTURE`` buffers: the same + ``OUTPUT`` timestamp will be copied to multiple ``CAPTURE`` buffers. + + * multiple ``OUTPUT`` buffers generate one ``CAPTURE`` buffer: timestamp of + the ``OUTPUT`` buffer queued first will be copied. + + * the decoding order differs from the display order (i.e. the ``CAPTURE`` + buffers are out-of-order compared to the ``OUTPUT`` buffers): ``CAPTURE`` + timestamps will not retain the order of ``OUTPUT`` timestamps. + +During the decoding, the decoder may initiate one of the special sequences, as +listed below. The sequences will result in the decoder returning all the +``CAPTURE`` buffers that originated from all the ``OUTPUT`` buffers processed +before the sequence started. Last of the buffers will have the +``V4L2_BUF_FLAG_LAST`` flag set. To determine the sequence to follow, the client +must check if there is any pending event and: + +* if a ``V4L2_EVENT_SOURCE_CHANGE`` event with ``changes`` set to + ``V4L2_EVENT_SRC_CH_RESOLUTION`` is pending, the `Dynamic Resolution + Change` sequence needs to be followed, + +* if a ``V4L2_EVENT_EOS`` event is pending, the `End of Stream` sequence needs + to be followed. + +Some of the sequences can be intermixed with each other and need to be handled +as they happen. The exact operation is documented for each sequence. + +Should a decoding error occur, it will be reported to the client with the level +of details depending on the decoder capabilities. Specifically: + +* the CAPTURE buffer that contains the results of the failed decode operation + will be returned with the V4L2_BUF_FLAG_ERROR flag set, + +* if the decoder is able to precisely report the OUTPUT buffer that triggered + the error, such buffer will be returned with the V4L2_BUF_FLAG_ERROR flag + set. + +In case of a fatal failure that does not allow the decoding to continue, any +further operations on corresponding decoder file handle will return the -EIO +error code. The client may close the file handle and open a new one, or +alternatively reinitialize the instance by stopping streaming on both queues, +releasing all buffers and performing the Initialization sequence again. + +Seek +==== + +Seek is controlled by the ``OUTPUT`` queue, as it is the source of coded data. +The seek does not require any specific operation on the ``CAPTURE`` queue, but +it may be affected as per normal decoder operation. + +1. Stop the ``OUTPUT`` queue to begin the seek sequence via + :c:func:`VIDIOC_STREAMOFF`. + + * **Required fields:** + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``. + + * The decoder will drop all the pending ``OUTPUT`` buffers and they must be + treated as returned to the client (following standard semantics). + +2. Restart the ``OUTPUT`` queue via :c:func:`VIDIOC_STREAMON`. + + * **Required fields:** + + ``type`` + a ``V4L2_BUF_TYPE_*`` enum appropriate for ``OUTPUT``. + + * The decoder will start accepting new source bytestream buffers after the + call returns. + +3. Start queuing buffers containing coded data after the seek to the ``OUTPUT`` + queue until a suitable resume point is found. + + .. note:: + + There is no requirement to begin queuing coded data starting exactly + from a resume point (e.g. SPS or a keyframe). Any queued ``OUTPUT`` + buffers will be processed and returned to the client until a suitable + resume point is found. While looking for a resume point, the decoder + should not produce any decoded frames into ``CAPTURE`` buffers. + + Some hardware is known to mishandle seeks to a non-resume point. Such an + operation may result in an unspecified number of corrupted decoded frames + being made available on the ``CAPTURE`` queue. Drivers must ensure that + no fatal decoding errors or crashes occur, and implement any necessary + handling and workarounds for hardware issues related to seek operations. + + .. warning:: + + In case of the H.264/HEVC codec, the client must take care not to seek + over a change of SPS/PPS. Even though the target frame could be a + keyframe, the stale SPS/PPS inside decoder state would lead to undefined + results when decoding. Although the decoder must handle that case without + a crash or a fatal decode error, the client must not expect a sensible + decode output. + + If the hardware can detect such corrupted decoded frames, then + corresponding buffers will be returned to the client with the + V4L2_BUF_FLAG_ERROR set. See the `Decoding` section for further + description of decode error reporting. + +4. After a resume point is found, the decoder will start returning ``CAPTURE`` + buffers containing decoded frames. + +.. important:: + + A seek may result in the `Dynamic Resolution Change` sequence being + initiated, due to the seek target having decoding parameters different from + the part of the stream decoded before the seek. The sequence must be handled + as per normal decoder operation. + +.. warning:: + + It is not specified when the ``CAPTURE`` queue starts producing buffers + containing decoded data from the ``OUTPUT`` buffers queued after the seek, + as it operates independently from the ``OUTPUT`` queue. + + The decoder may return a number of remaining ``CAPTURE`` buffers containing + decoded frames originating from the ``OUTPUT`` buffers queued before the + seek sequence is performed. + + The ``VIDIOC_STREAMOFF`` operation discards any remaining queued + ``OUTPUT`` buffers, which means that not all of the ``OUTPUT`` buffers + queued before the seek sequence may have matching ``CAPTURE`` buffers + produced. For example, given the sequence of operations on the + ``OUTPUT`` queue: + + QBUF(A), QBUF(B), STREAMOFF(), STREAMON(), QBUF(G), QBUF(H), + + any of the following results on the ``CAPTURE`` queue is allowed: + + {A’, B’, G’, H’}, {A’, G’, H’}, {G’, H’}. + + To determine the CAPTURE buffer containing the first decoded frame after the + seek, the client may observe the timestamps to match the CAPTURE and OUTPUT + buffers or use V4L2_DEC_CMD_STOP and V4L2_DEC_CMD_START to drain the + decoder. + +.. note:: + + To achieve instantaneous seek, the client may restart streaming on the + ``CAPTURE`` queue too to discard decoded, but not yet dequeued buffers. + +Dynamic Resolution Change +========================= + +Streams that include resolution metadata in the bytestream may require switching +to a different resolution during the decoding. + +.. note:: + + Not all decoders can detect resolution changes. Those that do set the + ``V4L2_FMT_FLAG_DYN_RESOLUTION`` flag for the coded format when + :c:func:`VIDIOC_ENUM_FMT` is called. + +The sequence starts when the decoder detects a coded frame with one or more of +the following parameters different from those previously established (and +reflected by corresponding queries): + +* coded resolution (``OUTPUT`` width and height), + +* visible resolution (selection rectangles), + +* the minimum number of buffers needed for decoding, + +* bit-depth of the bitstream has been changed. + +Whenever that happens, the decoder must proceed as follows: + +1. After encountering a resolution change in the stream, the decoder sends a + ``V4L2_EVENT_SOURCE_CHANGE`` event with ``changes`` set to + ``V4L2_EVENT_SRC_CH_RESOLUTION``. + + .. important:: + + Any client query issued after the decoder queues the event will return + values applying to the stream after the resolution change, including + queue formats, selection rectangles and controls. + +2. The decoder will then process and decode all remaining buffers from before + the resolution change point. + + * The last buffer from before the change must be marked with the + ``V4L2_BUF_FLAG_LAST`` flag, similarly to the `Drain` sequence above. + + .. warning:: + + The last buffer may be empty (with :c:type:`v4l2_buffer` ``bytesused`` + = 0) and in that case it must be ignored by the client, as it does not + contain a decoded frame. + + .. note:: + + Any attempt to dequeue more ``CAPTURE`` buffers beyond the buffer marked + with ``V4L2_BUF_FLAG_LAST`` will result in a -EPIPE error from + :c:func:`VIDIOC_DQBUF`. + +The client must continue the sequence as described below to continue the +decoding process. + +1. Dequeue the source change event. + + .. important:: + + A source change triggers an implicit decoder drain, similar to the + explicit `Drain` sequence. The decoder is stopped after it completes. + The decoding process must be resumed with either a pair of calls to + :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the + ``CAPTURE`` queue, or a call to :c:func:`VIDIOC_DECODER_CMD` with the + ``V4L2_DEC_CMD_START`` command. + +2. Continue with the `Capture Setup` sequence. + +.. note:: + + During the resolution change sequence, the ``OUTPUT`` queue must remain + streaming. Calling :c:func:`VIDIOC_STREAMOFF` on the ``OUTPUT`` queue would + abort the sequence and initiate a seek. + + In principle, the ``OUTPUT`` queue operates separately from the ``CAPTURE`` + queue and this remains true for the duration of the entire resolution change + sequence as well. + + The client should, for best performance and simplicity, keep queuing/dequeuing + buffers to/from the ``OUTPUT`` queue even while processing this sequence. + +Drain +===== + +To ensure that all queued ``OUTPUT`` buffers have been processed and related +``CAPTURE`` buffers are given to the client, the client must follow the drain +sequence described below. After the drain sequence ends, the client has +received all decoded frames for all ``OUTPUT`` buffers queued before the +sequence was started. + +1. Begin drain by issuing :c:func:`VIDIOC_DECODER_CMD`. + + * **Required fields:** + + ``cmd`` + set to ``V4L2_DEC_CMD_STOP``. + + ``flags`` + set to 0. + + ``pts`` + set to 0. + + .. warning:: + + The sequence can be only initiated if both ``OUTPUT`` and ``CAPTURE`` + queues are streaming. For compatibility reasons, the call to + :c:func:`VIDIOC_DECODER_CMD` will not fail even if any of the queues is + not streaming, but at the same time it will not initiate the `Drain` + sequence and so the steps described below would not be applicable. + +2. Any ``OUTPUT`` buffers queued by the client before the + :c:func:`VIDIOC_DECODER_CMD` was issued will be processed and decoded as + normal. The client must continue to handle both queues independently, + similarly to normal decode operation. This includes: + + * handling any operations triggered as a result of processing those buffers, + such as the `Dynamic Resolution Change` sequence, before continuing with + the drain sequence, + + * queuing and dequeuing ``CAPTURE`` buffers, until a buffer marked with the + ``V4L2_BUF_FLAG_LAST`` flag is dequeued, + + .. warning:: + + The last buffer may be empty (with :c:type:`v4l2_buffer` + ``bytesused`` = 0) and in that case it must be ignored by the client, + as it does not contain a decoded frame. + + .. note:: + + Any attempt to dequeue more ``CAPTURE`` buffers beyond the buffer + marked with ``V4L2_BUF_FLAG_LAST`` will result in a -EPIPE error from + :c:func:`VIDIOC_DQBUF`. + + * dequeuing processed ``OUTPUT`` buffers, until all the buffers queued + before the ``V4L2_DEC_CMD_STOP`` command are dequeued, + + * dequeuing the ``V4L2_EVENT_EOS`` event, if the client subscribed to it. + + .. note:: + + For backwards compatibility, the decoder will signal a ``V4L2_EVENT_EOS`` + event when the last frame has been decoded and all frames are ready to be + dequeued. It is a deprecated behavior and the client must not rely on it. + The ``V4L2_BUF_FLAG_LAST`` buffer flag should be used instead. + +3. Once all the ``OUTPUT`` buffers queued before the ``V4L2_DEC_CMD_STOP`` call + are dequeued and the last ``CAPTURE`` buffer is dequeued, the decoder is + stopped and it will accept, but not process, any newly queued ``OUTPUT`` + buffers until the client issues any of the following operations: + + * ``V4L2_DEC_CMD_START`` - the decoder will not be reset and will resume + operation normally, with all the state from before the drain, + + * a pair of :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the + ``CAPTURE`` queue - the decoder will resume the operation normally, + however any ``CAPTURE`` buffers still in the queue will be returned to the + client, + + * a pair of :c:func:`VIDIOC_STREAMOFF` and :c:func:`VIDIOC_STREAMON` on the + ``OUTPUT`` queue - any pending source buffers will be returned to the + client and the `Seek` sequence will be triggered. + +.. note:: + + Once the drain sequence is initiated, the client needs to drive it to + completion, as described by the steps above, unless it aborts the process by + issuing :c:func:`VIDIOC_STREAMOFF` on any of the ``OUTPUT`` or ``CAPTURE`` + queues. The client is not allowed to issue ``V4L2_DEC_CMD_START`` or + ``V4L2_DEC_CMD_STOP`` again while the drain sequence is in progress and they + will fail with -EBUSY error code if attempted. + + Although not mandatory, the availability of decoder commands may be queried + using :c:func:`VIDIOC_TRY_DECODER_CMD`. + +End of Stream +============= + +If the decoder encounters an end of stream marking in the stream, the decoder +will initiate the `Drain` sequence, which the client must handle as described +above, skipping the initial :c:func:`VIDIOC_DECODER_CMD`. + +Commit Points +============= + +Setting formats and allocating buffers trigger changes in the behavior of the +decoder. + +1. Setting the format on the ``OUTPUT`` queue may change the set of formats + supported/advertised on the ``CAPTURE`` queue. In particular, it also means + that the ``CAPTURE`` format may be reset and the client must not rely on the + previously set format being preserved. + +2. Enumerating formats on the ``CAPTURE`` queue always returns only formats + supported for the current ``OUTPUT`` format. + +3. Setting the format on the ``CAPTURE`` queue does not change the list of + formats available on the ``OUTPUT`` queue. An attempt to set a ``CAPTURE`` + format that is not supported for the currently selected ``OUTPUT`` format + will result in the decoder adjusting the requested ``CAPTURE`` format to a + supported one. + +4. Enumerating formats on the ``OUTPUT`` queue always returns the full set of + supported coded formats, irrespectively of the current ``CAPTURE`` format. + +5. While buffers are allocated on any of the ``OUTPUT`` or ``CAPTURE`` queues, + the client must not change the format on the ``OUTPUT`` queue. Drivers will + return the -EBUSY error code for any such format change attempt. + +To summarize, setting formats and allocation must always start with the +``OUTPUT`` queue and the ``OUTPUT`` queue is the master that governs the +set of supported formats for the ``CAPTURE`` queue. |