Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 101 insertions, 0 deletions

diff --git a/arch/arc/include/asm/tlb-mmu1.h b/arch/arc/include/asm/tlb-mmu1.h
new file mode 100644
index 000000000..a3083b36f
--- /dev/null
+++ b/arch/arc/include/asm/tlb-mmu1.h
@@ -0,0 +1,101 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+#ifndef __ASM_TLB_MMU_V1_H__
+#define __ASM_TLB_MMU_V1_H__
+
+#include <asm/mmu.h>
+
+#if defined(__ASSEMBLY__) && (CONFIG_ARC_MMU_VER == 1)
+
+.macro TLB_WRITE_HEURISTICS
+
+#define JH_HACK1
+#undef JH_HACK2
+#undef JH_HACK3
+
+#ifdef JH_HACK3
+; Calculate set index for 2-way MMU
+; -avoiding use of GetIndex from MMU
+;   and its unpleasant LFSR pseudo-random sequence
+;
+; r1 = TLBPD0 from TLB_RELOAD above
+;
+; -- jh_ex_way_set not cleared on startup
+;    didn't want to change setup.c
+;    hence extra instruction to clean
+;
+; -- should be in cache since in same line
+;    as r0/r1 saves above
+;
+ld  r0,[jh_ex_way_sel]  ; victim pointer
+and r0,r0,1         ; clean
+xor.f   r0,r0,1         ; flip
+st  r0,[jh_ex_way_sel]  ; store back
+asr r0,r1,12        ; get set # <<1, note bit 12=R=0
+or.nz   r0,r0,1         ; set way bit
+and r0,r0,0xff      ; clean
+sr  r0,[ARC_REG_TLBINDEX]
+#endif
+
+#ifdef JH_HACK2
+; JH hack #2
+;  Faster than hack #1 in non-thrash case, but hard-coded for 2-way MMU
+;  Slower in thrash case (where it matters) because more code is executed
+;  Inefficient due to two-register paradigm of this miss handler
+;
+/* r1 = data TLBPD0 at this point */
+lr      r0,[eret]               /* instruction address */
+xor     r0,r0,r1                /* compare set #       */
+and.f   r0,r0,0x000fe000        /* 2-way MMU mask      */
+bne     88f                     /* not in same set - no need to probe */
+
+lr      r0,[eret]               /* instruction address */
+and     r0,r0,PAGE_MASK         /* VPN of instruction address */
+; lr  r1,[ARC_REG_TLBPD0]     /* Data VPN+ASID - already in r1 from TLB_RELOAD*/
+and     r1,r1,0xff              /* Data ASID */
+or      r0,r0,r1                /* Instruction address + Data ASID */
+
+lr      r1,[ARC_REG_TLBPD0]     /* save TLBPD0 containing data TLB*/
+sr      r0,[ARC_REG_TLBPD0]     /* write instruction address to TLBPD0 */
+sr      TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */
+lr      r0,[ARC_REG_TLBINDEX]   /* r0 = index where instruction is, if at all */
+sr      r1,[ARC_REG_TLBPD0]     /* restore TLBPD0 */
+
+xor     r0,r0,1                 /* flip bottom bit of data index */
+b.d     89f
+sr      r0,[ARC_REG_TLBINDEX]   /* and put it back */
+88:
+sr  TLBGetIndex, [ARC_REG_TLBCOMMAND]
+89:
+#endif
+
+#ifdef JH_HACK1
+;
+; Always checks whether instruction will be kicked out by dtlb miss
+;
+mov_s   r3, r1                  ; save PD0 prepared by TLB_RELOAD in r3
+lr      r0,[eret]               /* instruction address */
+and     r0,r0,PAGE_MASK         /* VPN of instruction address */
+bmsk    r1,r3,7                 /* Data ASID, bits 7-0 */
+or_s    r0,r0,r1                /* Instruction address + Data ASID */
+
+sr      r0,[ARC_REG_TLBPD0]     /* write instruction address to TLBPD0 */
+sr      TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */
+lr      r0,[ARC_REG_TLBINDEX]   /* r0 = index where instruction is, if at all */
+sr      r3,[ARC_REG_TLBPD0]     /* restore TLBPD0 */
+
+sr      TLBGetIndex, [ARC_REG_TLBCOMMAND]
+lr      r1,[ARC_REG_TLBINDEX]   /* r1 = index where MMU wants to put data */
+cmp     r0,r1                   /* if no match on indices, go around */
+xor.eq  r1,r1,1                 /* flip bottom bit of data index */
+sr      r1,[ARC_REG_TLBINDEX]   /* and put it back */
+#endif
+
+.endm
+
+#endif
+
+#endif