Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 877 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
new file mode 100644
index 000000000..f9392a135
--- /dev/null
+++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi
@@ -0,0 +1,877 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "omap443x.dtsi"
+#include "motorola-cpcap-mapphone.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi0;
+	};
+
+	/*
+	 * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
+	 * then 1023 - 1024 seems to contain mbm.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x3fd00000>;	/* 1021 MB */
+	};
+
+	/* Poweroff GPIO probably connected to CPCAP */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&poweroff_gpio>;
+		pinctrl-names = "default";
+		gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;	/* gpio50 */
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		pinctrl-0 = <&hdmi_hpd_gpio>;
+		pinctrl-names = "default";
+		label = "hdmi";
+		type = "d";
+
+		hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;	/* gpio63 */
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_out>;
+			};
+		};
+	};
+
+	/*
+	 * HDMI 5V regulator probably sourced from battery. Let's keep
+	 * keep this as always enabled for HDMI to work until we've
+	 * figured what the encoder chip is.
+	 */
+	hdmi_regulator: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>;	/* gpio59 */
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	/* FS USB Host PHY on port 1 for mdm6600 */
+	fsusb1_phy: usb-phy@1 {
+		compatible = "motorola,mapphone-mdm6600";
+		pinctrl-0 = <&usb_mdm6600_pins>;
+		pinctrl-names = "default";
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
+		power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;	/* gpio_54 */
+		reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;	/* gpio_49 */
+		/* mode: gpio_148 gpio_149 */
+		motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+				      <&gpio5 21 GPIO_ACTIVE_HIGH>;
+		/* cmd: gpio_103 gpio_104 gpio_142 */
+		motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+				     <&gpio4 8 GPIO_ACTIVE_HIGH>,
+				     <&gpio5 14 GPIO_ACTIVE_HIGH>;
+		/* status: gpio_52 gpio_53 gpio_55 */
+		motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+					<&gpio2 21 GPIO_ACTIVE_HIGH>,
+					<&gpio2 23 GPIO_ACTIVE_HIGH>;
+		#phy-cells = <0>;
+	};
+
+	/* HS USB host TLL nop-phy on port 2 for w3glte */
+	hsusb2_phy: usb-phy@2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	/* LCD regulator from sw5 source */
+	lcd_regulator: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd";
+		regulator-min-microvolt = <5050000>;
+		regulator-max-microvolt = <5050000>;
+		gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;	/* gpio96 */
+		enable-active-high;
+		vin-supply = <&sw5>;
+	};
+
+	/* This is probably coming straight from the battery.. */
+	wl12xx_vmmc: regulator-wl12xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1650000>;
+		regulator-max-microvolt = <1650000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;	/* gpio94 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		volume_down {
+			label = "Volume Down";
+			gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
+			linux,code = <KEY_VOLUMEDOWN>;
+			linux,can-disable;
+			/* Value above 7.95ms for no GPIO hardware debounce */
+			debounce-interval = <10>;
+		};
+
+		slider {
+			label = "Keypad Slide";
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_KEYPAD_SLIDE>;
+			linux,can-disable;
+			/* Value above 7.95ms for no GPIO hardware debounce */
+			debounce-interval = <10>;
+		};
+	};
+
+	soundcard {
+		compatible = "audio-graph-card";
+		label = "Droid 4 Audio";
+
+		widgets =
+			"Speaker", "Earpiece",
+			"Speaker", "Loudspeaker",
+			"Headphone", "Headphone Jack",
+			"Microphone", "Internal Mic";
+
+		routing =
+			"Earpiece", "EP",
+			"Loudspeaker", "SPKR",
+			"Headphone Jack", "HSL",
+			"Headphone Jack", "HSR",
+			"MICR", "Internal Mic";
+
+		dais = <&mcbsp2_port>, <&mcbsp3_port>;
+	};
+
+	pwm8: pwm-8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_direction_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer8>;
+		ti,clock-source = <0x01>;
+	};
+
+	pwm9: pwm-9 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_enable_pin>;
+
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer9>;
+		ti,clock-source = <0x01>;
+	};
+
+	vibrator {
+		compatible = "pwm-vibrator";
+		pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+		pwm-names = "enable", "direction";
+		direction-duty-cycle-ns = <10000000>;
+	};
+
+	backlight: backlight {
+		compatible = "led-backlight";
+
+		leds = <&backlight_led>;
+		brightness-levels = <31 63 95 127 159 191 223 255>;
+		default-brightness-level = <6>;
+	};
+};
+
+&cpu_thermal {
+	polling-delay = <10000>; /* milliseconds */
+};
+
+&cpu_alert0 {
+        temperature = <80000>; /* millicelsius */
+};
+
+&cpu0 {
+        /*
+	 * Note that the 1.2GiHz mode is enabled for all SoC variants for
+	 * the Motorola Android Linux v3.0.8 based kernel.
+	 */
+        operating-points = <
+	        /* kHz    uV */
+	        300000  1025000
+	        600000  1200000
+	        800000  1313000
+	        1008000 1375000
+		1200000 1375000
+        >;
+};
+
+&dss {
+	status = "okay";
+};
+
+&dsi1 {
+	status = "okay";
+	vdd-supply = <&vcsi>;
+
+	port {
+		dsi1_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <0 1 2 3 4 5>;
+		};
+	};
+
+	lcd0: panel@0 {
+		compatible = "motorola,droid4-panel", "panel-dsi-cm";
+		reg = <0>;
+		label = "lcd0";
+		vddi-supply = <&lcd_regulator>;
+		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
+
+		backlight = <&backlight>;
+
+		width-mm = <50>;
+		height-mm = <89>;
+		rotation = <90>;
+
+		panel-timing {
+			clock-frequency = <0>;		/* Calculated by dsi */
+
+			hback-porch = <2>;
+			hactive = <540>;
+			hfront-porch = <0>;
+			hsync-len = <2>;
+
+			vback-porch = <1>;
+			vactive = <960>;
+			vfront-porch = <0>;
+			vsync-len = <1>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi1_out_ep>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+	pinctrl-0 = <&dss_hdmi_pins>;
+	pinctrl-names = "default";
+	vdda-supply = <&vdac>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+			lanes = <1 0 3 2 5 4 7 6>;
+		};
+	};
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+	pinctrl-0 = <&hdq_pins>;
+	pinctrl-names = "default";
+	ti,mode = "1w";
+};
+
+&i2c1 {
+	tmp105@48 {
+		compatible = "ti,tmp105";
+		reg = <0x48>;
+		pinctrl-0 = <&tmp105_irq>;
+		pinctrl-names = "default";
+		/* kpd_row0.gpio_178 */
+		interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
+				       &omap4_pmx_core 0x14e>;
+		interrupt-names = "irq", "wakeup";
+		wakeup-source;
+	};
+};
+
+&keypad {
+	keypad,num-rows = <8>;
+	keypad,num-columns = <8>;
+	linux,keymap = <
+
+	/* Row 1 */
+	MATRIX_KEY(0, 2, KEY_1)
+	MATRIX_KEY(0, 6, KEY_2)
+	MATRIX_KEY(2, 3, KEY_3)
+	MATRIX_KEY(0, 7, KEY_4)
+	MATRIX_KEY(0, 4, KEY_5)
+	MATRIX_KEY(5, 5, KEY_6)
+	MATRIX_KEY(0, 1, KEY_7)
+	MATRIX_KEY(0, 5, KEY_8)
+	MATRIX_KEY(0, 0, KEY_9)
+	MATRIX_KEY(1, 6, KEY_0)
+
+	/* Row 2 */
+	MATRIX_KEY(3, 4, KEY_APOSTROPHE)
+	MATRIX_KEY(7, 6, KEY_Q)
+	MATRIX_KEY(7, 7, KEY_W)
+	MATRIX_KEY(7, 2, KEY_E)
+	MATRIX_KEY(1, 0, KEY_R)
+	MATRIX_KEY(4, 4, KEY_T)
+	MATRIX_KEY(1, 2, KEY_Y)
+	MATRIX_KEY(6, 7, KEY_U)
+	MATRIX_KEY(2, 2, KEY_I)
+	MATRIX_KEY(5, 6, KEY_O)
+	MATRIX_KEY(3, 7, KEY_P)
+	MATRIX_KEY(6, 5, KEY_BACKSPACE)
+
+	/* Row 3 */
+	MATRIX_KEY(5, 4, KEY_TAB)
+	MATRIX_KEY(5, 7, KEY_A)
+	MATRIX_KEY(2, 7, KEY_S)
+	MATRIX_KEY(7, 0, KEY_D)
+	MATRIX_KEY(2, 6, KEY_F)
+	MATRIX_KEY(6, 2, KEY_G)
+	MATRIX_KEY(6, 6, KEY_H)
+	MATRIX_KEY(1, 4, KEY_J)
+	MATRIX_KEY(3, 1, KEY_K)
+	MATRIX_KEY(2, 1, KEY_L)
+	MATRIX_KEY(4, 6, KEY_ENTER)
+
+	/* Row 4 */
+	MATRIX_KEY(3, 6, KEY_LEFTSHIFT)		/* KEY_CAPSLOCK */
+	MATRIX_KEY(6, 1, KEY_Z)
+	MATRIX_KEY(7, 4, KEY_X)
+	MATRIX_KEY(5, 1, KEY_C)
+	MATRIX_KEY(1, 7, KEY_V)
+	MATRIX_KEY(2, 4, KEY_B)
+	MATRIX_KEY(4, 1, KEY_N)
+	MATRIX_KEY(1, 1, KEY_M)
+	MATRIX_KEY(3, 5, KEY_COMMA)
+	MATRIX_KEY(5, 2, KEY_DOT)
+	MATRIX_KEY(6, 3, KEY_UP)
+	MATRIX_KEY(7, 3, KEY_OK)
+
+	/* Row 5 */
+	MATRIX_KEY(2, 5, KEY_LEFTCTRL)		/* KEY_LEFTSHIFT */
+	MATRIX_KEY(4, 5, KEY_LEFTALT)		/* SYM */
+	MATRIX_KEY(6, 0, KEY_MINUS)
+	MATRIX_KEY(4, 7, KEY_EQUAL)
+	MATRIX_KEY(1, 5, KEY_SPACE)
+	MATRIX_KEY(3, 2, KEY_SLASH)
+	MATRIX_KEY(4, 3, KEY_LEFT)
+	MATRIX_KEY(5, 3, KEY_DOWN)
+	MATRIX_KEY(3, 3, KEY_RIGHT)
+
+	/* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
+	MATRIX_KEY(5, 0, KEY_VOLUMEUP)
+	>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vwlan2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;	/* gpio176 */
+};
+
+&mmc2 {
+	vmmc-supply = <&vsdio>;
+	bus-width = <8>;
+	ti,non-removable;
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	vmmc-supply = <&wl12xx_vmmc>;
+	/* uart2_tx.sdmmc3_dat1 pad as wakeirq */
+	interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0xde>;
+	interrupt-names = "irq", "wakeup";
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1285";
+		reg = <2>;
+		/* gpio_100 with gpmc_wait2 pad as wakeirq */
+		interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>,
+				      <&omap4_pmx_core 0x4e>;
+		interrupt-names = "irq", "wakeup";
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&i2c1 {
+	led-controller@38 {
+		compatible = "ti,lm3532";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x38>;
+
+		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+
+		ramp-up-us = <1024>;
+		ramp-down-us = <8193>;
+
+		backlight_led: led@0 {
+			reg = <0>;
+			led-sources = <2>;
+			ti,led-mode = <0>;
+			label = ":backlight";
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			ti,led-mode = <0>;
+			label = ":kbd_backlight";
+		};
+	};
+};
+
+&i2c2 {
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchscreen_pins>;
+
+		reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+		/* gpio_183 with sys_nirq2 pad as wakeup */
+		interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+				      <&omap4_pmx_core 0x160>;
+		interrupt-names = "irq", "wakeup";
+		wakeup-source;
+	};
+
+	isl29030@44 {
+		compatible = "isil,isl29030";
+		reg = <0x44>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&als_proximity_pins>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+	};
+};
+
+&omap4_pmx_core {
+
+	/* hdmi_hpd.gpio_63 */
+	hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
+		>;
+	};
+
+	hdq_pins: pinmux_hdq_pins {
+		pinctrl-single,pins = <
+		/* 0x4a100120 hdq_sio.hdq_sio aa27 */
+		OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
+		>;
+	};
+
+	/*
+	 * Android uses PIN_OFF_INPUT_PULLDOWN | PIN_INPUT_PULLUP | MUX_MODE3
+	 * for gpio_100, but the internal pull makes wlan flakey on some
+	 * devices. Off mode value should be tested if we have off mode working
+	 * later on.
+	 */
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+		/* 0x4a10008e gpmc_wait2.gpio_100 d23 */
+		OMAP4_IOPAD(0x08e, PIN_INPUT | MUX_MODE3)
+
+		/* 0x4a100102 abe_mcbsp1_dx.sdmmc3_dat2 ab25 */
+		OMAP4_IOPAD(0x102, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a100104 abe_mcbsp1_fsx.sdmmc3_dat3 ac27 */
+		OMAP4_IOPAD(0x104, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a100118 uart2_cts.sdmmc3_clk ab26 */
+		OMAP4_IOPAD(0x118, PIN_INPUT | MUX_MODE1)
+
+		/* 0x4a10011a uart2_rts.sdmmc3_cmd ab27 */
+		OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10011c uart2_rx.sdmmc3_dat0 aa25 */
+		OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10011e uart2_tx.sdmmc3_dat1 aa26 */
+		OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE1)
+		>;
+	};
+
+	/* gpmc_ncs0.gpio_50 */
+	poweroff_gpio: pinmux_poweroff_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	/* kpd_row0.gpio_178 */
+	tmp105_irq: pinmux_tmp105_irq {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
+		/* gpio_60 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	touchscreen_pins: pinmux_touchscreen_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+		OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	als_proximity_pins: pinmux_als_proximity_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+		>;
+	};
+
+	usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
+		pinctrl-single,pins = <
+		/* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+		OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+		/* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+		OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+		/* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+		OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+		OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+		/* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+		OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+		/* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+		OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+		/* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+		OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+		/* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+		OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+		/* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+		OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+		OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+		/* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+		OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+		>;
+	};
+
+	usb_ulpi_pins: pinmux_usb_ulpi_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, MUX_MODE7)
+		OMAP4_IOPAD(0x198, MUX_MODE7)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	/* usb0_otg_dp and usb0_otg_dm */
+	usb_utmi_pins: pinmux_usb_utmi_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	/*
+	 * Note that the v3.0.8 stock userspace dynamically remuxes uart1
+	 * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
+	 * when not used. If needed, we can add rts pin remux later based
+	 * on power measurements.
+	 */
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+		/* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
+		OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
+
+		/* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
+		OMAP4_IOPAD(0x13e, MUX_MODE1)
+
+		/* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
+		OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
+
+		/* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
+		OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
+		>;
+	};
+
+	/* uart3_tx_irtx and uart3_rx_irrx */
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x196, MUX_MODE7)
+		OMAP4_IOPAD(0x198, MUX_MODE7)
+		OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1ba, MUX_MODE2)
+		OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
+		OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
+		OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)		/* uart4_rx */
+		OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)		/* uart4_tx */
+		OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5)	/* uart4_cts */
+		OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5)	/* uart4_rts */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_clkx */
+		OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_dr */
+		OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)	/* abe_mcbsp2_dx */
+		OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)	/* abe_mcbsp2_fsx */
+		>;
+	};
+
+	mcbsp3_pins: pinmux_mcbsp3_pins {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_dr */
+		OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)	/* abe_mcbsp3_dx */
+		OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_clkx */
+		OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)	/* abe_mcbsp3_fsx */
+		>;
+	};
+
+	vibrator_direction_pin: pinmux_vibrator_direction_pin {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)	/* dmtimer8_pwm_evt (gpio_27) */
+		>;
+	};
+
+	vibrator_enable_pin: pinmux_vibrator_enable_pin {
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)	/* dmtimer9_pwm_evt (gpio_28) */
+		>;
+	};
+};
+
+&omap4_pmx_wkup {
+	usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
+		/* gpio_wk0 */
+		pinctrl-single,pins = <
+		OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+};
+
+/* RNG is used by secure mode and not accessible */
+&rng_target {
+	status = "disabled";
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+	assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+	assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_32k_ck>;
+};
+
+/*
+ * The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
+ * for wake-up events for both the USB PHY and the UART. We can use gpio_149
+ * pad as the shared wakeirq for the UART rather than the RX or CTS pad as we
+ * have gpio_149 trigger before the UART transfer starts.
+ */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x110>;
+	uart-has-rtscts;
+	current-speed = <115200>;
+};
+
+&uart3 {
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+			       &omap4_pmx_core 0x17c>;
+	overrun-throttle-ms = <500>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+
+	bluetooth {
+		compatible = "ti,wl1285-st";
+		enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
+		max-speed = <3686400>;
+	};
+};
+
+&usbhsohci {
+	phys = <&fsusb1_phy>;
+	phy-names = "usb";
+};
+
+&usbhsehci {
+	phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+	port1-mode = "ohci-phy-4pin-dpdm";
+	port2-mode = "ehci-tll";
+};
+
+/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+
+	/*
+	 * Max 300 mA steps based on similar PMIC MC13783UG.pdf "Table 10-4.
+	 * VBUS Regulator Main Characteristics". Binding uses 2 mA units.
+	 */
+	power = <150>;
+};
+
+&i2c4 {
+	ak8975: magnetometer@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		vdd-supply = <&vhvio>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+		rotation-matrix = "-1", "0", "0",
+				  "0", "1", "0",
+				  "0", "0", "-1";
+
+	};
+
+	lis3dh: accelerometer@18 {
+		compatible = "st,lis3dh-accel";
+		reg = <0x18>;
+
+		vdd-supply = <&vhvio>;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
+
+		rotation-matrix = "0", "-1", "0",
+				  "1", "0", "0",
+				  "0", "0", "1";
+	};
+};
+
+&mcbsp2 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+	status = "okay";
+
+	mcbsp2_port: port {
+		cpu_dai2: endpoint {
+			dai-format = "i2s";
+			remote-endpoint = <&cpcap_audio_codec0>;
+			frame-master = <&cpcap_audio_codec0>;
+			bitclock-master = <&cpcap_audio_codec0>;
+		};
+	};
+};
+
+&mcbsp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp3_pins>;
+	status = "okay";
+
+	mcbsp3_port: port {
+		cpu_dai3: endpoint {
+			dai-format = "dsp_a";
+			frame-master = <&cpcap_audio_codec1>;
+			bitclock-master = <&cpcap_audio_codec1>;
+			remote-endpoint = <&cpcap_audio_codec1>;
+		};
+	};
+};
+
+&cpcap_audio_codec0 {
+	remote-endpoint = <&cpu_dai2>;
+};
+
+&cpcap_audio_codec1 {
+	remote-endpoint = <&cpu_dai3>;
+};