diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /arch/arm/boot/dts/s5pv210-aries.dtsi | |
parent | Initial commit. (diff) | |
download | linux-430c2fc249ea5c0536abd21c23382884005c9093.tar.xz linux-430c2fc249ea5c0536abd21c23382884005c9093.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm/boot/dts/s5pv210-aries.dtsi')
-rw-r--r-- | arch/arm/boot/dts/s5pv210-aries.dtsi | 917 |
1 files changed, 917 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi new file mode 100644 index 000000000..8f7dcd7af --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-aries.dtsi @@ -0,0 +1,917 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's S5PV210 based Galaxy Aries board device tree source + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "s5pv210.dtsi" + +/ { + compatible = "samsung,aries", "samsung,s5pv210"; + + aliases: aliases { + i2c4 = &i2c_sound; + i2c5 = &i2c_accel; + i2c6 = &i2c_pmic; + i2c7 = &i2c_musb; + i2c9 = &i2c_fuel; + i2c10 = &i2c_touchkey; + i2c11 = &i2c_prox; + i2c12 = &i2c_magnetometer; + }; + + memory@30000000 { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x10000000 + 0x50000000 0x08000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mfc_left: region@43000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x43000000 0x2000000>; + }; + + mfc_right: region@51000000 { + compatible = "shared-dma-pool"; + no-map; + reg = <0x51000000 0x2000000>; + }; + }; + + pmic_ap_clk: clock-0 { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + bt_codec: bt-sco { + compatible = "linux,bt-sco"; + #sound-dai-cells = <0>; + }; + + vibrator_pwr: regulator-fixed-0 { + compatible = "regulator-fixed"; + regulator-name = "vibrator-en"; + enable-active-high; + gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_ena>; + }; + + touchkey_vdd: regulator-fixed-1 { + compatible = "regulator-fixed"; + regulator-name = "VTOUCH_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_vdd_ena>; + }; + + gp2a_vled: regulator-fixed-2 { + compatible = "regulator-fixed"; + regulator-name = "VLED"; + enable-active-high; + gpio = <&gpj1 4 GPIO_ACTIVE_HIGH>; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + pinctrl-names = "default"; + pinctrl-0 = <&gp2a_power>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpg1 2 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_gpio_rst>; + post-power-on-delay-ms = <500>; + power-off-delay-us = <500>; + }; + + i2c_sound: i2c-gpio-0 { + compatible = "i2c-gpio"; + sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&sound_i2c_pins>; + + wm8994: audio-codec@1a { + compatible = "wlf,wm8994"; + reg = <0x1a>; + + #sound-dai-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + clocks = <&clocks MOUT_CLKOUT>; + clock-names = "MCLK1"; + + AVDD2-supply = <&buck3_reg>; + DBVDD-supply = <&buck3_reg>; + CPVDD-supply = <&buck3_reg>; + SPKVDD1-supply = <&buck3_reg>; + SPKVDD2-supply = <&buck3_reg>; + + wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100 + 0xa101 0x0100 0x8100 0x0100 0x0100 + 0x0100>; + + wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>; + wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>; + + wlf,lineout1-se; + wlf,lineout2-se; + + assigned-clocks = <&clocks MOUT_CLKOUT>; + assigned-clock-rates = <0>; + assigned-clock-parents = <&xusbxti>; + + pinctrl-names = "default"; + pinctrl-0 = <&codec_ldo>; + }; + }; + + i2c_accel: i2c-gpio-1 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&accel_i2c_pins>; + + accelerometer@38 { + compatible = "bosch,bma023"; + reg = <0x38>; + + vdd-supply = <&ldo9_reg>; + vddio-supply = <&ldo9_reg>; + }; + }; + + i2c_pmic: i2c-gpio-2 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_i2c_pins>; + + pmic@66 { + compatible = "maxim,max8998"; + reg = <0x66>; + interrupt-parent = <&gph0>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + max8998,pmic-buck1-default-dvs-idx = <1>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck1-dvs-voltage = <1275000>, <1200000>, + <1050000>, <950000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_dvs_pins &pmic_irq>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo6_reg: LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3600000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_AF_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo13_reg: LDO13 { + regulator-name = "VGA_VDDIO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo14_reg: LDO14 { + regulator-name = "VGA_DVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_ISP_HOST_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo16_reg: LDO16 { + regulator-name = "VGA_AVDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo17_reg: LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck1_reg: BUCK1 { + regulator-name = "vddarm"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1250000>; + }; + }; + + buck2_reg: BUCK2 { + regulator-name = "vddint"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + cp32khz_reg: EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + }; + }; + }; + }; + + i2c_musb: i2c-gpio-3 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&musb_i2c_pins>; + + fsa9480: musb@25 { + compatible = "fcs,fsa9480"; + reg = <0x25>; + interrupt-parent = <&gph2>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&musb_irq>; + }; + }; + + i2c_fuel: i2c-gpio-4 { + compatible = "i2c-gpio"; + sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_i2c_pins>; + + fg: fuelgauge@36 { + compatible = "maxim,max17040"; + reg = <0x36>; + }; + }; + + i2c_touchkey: i2c-gpio-5 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_i2c_pins>; + + touchkey@20 { + compatible = "cypress,aries-touchkey"; + reg = <0x20>; + vdd-supply = <&touchkey_vdd>; + vcc-supply = <&buck3_reg>; + linux,keycodes = <KEY_MENU KEY_BACK + KEY_HOMEPAGE KEY_SEARCH>; + interrupt-parent = <&gpj4>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&touchkey_irq>; + }; + }; + + i2c_prox: i2c-gpio-6 { + compatible = "i2c-gpio"; + sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&prox_i2c_pins>; + + light-sensor@44 { + compatible = "sharp,gp2ap002a00f"; + reg = <0x44>; + interrupt-parent = <&gph0>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&gp2a_vled>; + vio-supply = <&gp2a_vled>; + io-channels = <&gp2a_shunt>; + io-channel-names = "alsout"; + sharp,proximity-far-hysteresis = /bits/ 8 <0x40>; + sharp,proximity-close-hysteresis = /bits/ 8 <0x20>; + + pinctrl-names = "default"; + pinctrl-0 = <&gp2a_irq>; + }; + }; + + i2c_magnetometer: i2c-gpio-7 { + compatible = "i2c-gpio"; + sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&magnetometer_i2c_pins>; + + status = "disabled"; + + /* Yamaha yas529 magnetometer, no mainline binding */ + }; + + vibrator: pwm-vibrator { + compatible = "pwm-vibrator"; + pwms = <&pwm 1 44642 0>; + pwm-names = "enable"; + vcc-supply = <&vibrator_pwr>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_out>; + }; + + poweroff: syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmu_syscon>; + offset = <0x681c>; /* PS_HOLD_CONTROL */ + value = <0x5200>; + }; + + spi_lcd: spi-2 { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>; + cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_spi_pins>; + + panel@0 { + compatible = "samsung,s6e63m0"; + reg = <0>; + reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>; + vdd3-supply = <&ldo7_reg>; + vci-supply = <&ldo17_reg>; + spi-max-frequency = <1200000>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_rst>; + + port { + lcd_ep: endpoint { + remote-endpoint = <&fimd_ep>; + }; + }; + }; + }; +}; + +&adc { + vdd-supply = <&ldo4_reg>; + + status = "okay"; + + gp2a_shunt: current-sense-shunt { + compatible = "current-sense-shunt"; + io-channels = <&adc 9>; + shunt-resistor-micro-ohms = <47000000>; /* 47 ohms */ + #io-channel-cells = <0>; + io-channel-ranges; + }; +}; + +&fimd { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_clk &lcd_data24>; + status = "okay"; + + samsung,invert-vden; + samsung,invert-vclk; + + #address-cells = <1>; + #size-cells = <0>; + + port@3 { + reg = <3>; + fimd_ep: endpoint { + remote-endpoint = <&lcd_ep>; + }; + }; +}; + +&hsotg { + vusb_a-supply = <&ldo8_reg>; + vusb_d-supply = <&ldo3_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpj0>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_irq>; + reset-gpios = <&gpj1 3 GPIO_ACTIVE_LOW>; + }; +}; + +&i2s0 { + dmas = <&pdma0 10>, <&pdma0 9>, <&pdma0 11>; + status = "okay"; +}; + +&mfc { + memory-region = <&mfc_left>, <&mfc_right>; +}; + +&pinctrl0 { + bt_reset: bt-reset { + samsung,pins = "gpb-3"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + wlan_bt_en: wlan-bt-en { + samsung,pins = "gpb-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-val = <1>; + }; + + codec_ldo: codec-ldo { + samsung,pins = "gpf3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + + prox_i2c_pins: gp2a-i2c-pins { + samsung,pins = "gpg0-2", "gpg2-2"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + wlan_gpio_rst: wlan-gpio-rst { + samsung,pins = "gpg1-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + + bt_wake: bt-wake { + samsung,pins = "gpg3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + + gp2a_irq: gp2a-irq { + samsung,pins = "gph0-2"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pmic_dvs_pins: pmic-dvs-pins { + samsung,pins = "gph0-3", "gph0-4", "gph0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + samsung,pin-val = <0>; + }; + + pmic_irq: pmic-irq { + samsung,pins = "gph0-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_F>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + wifi_host_wake: wifi-host-wake { + samsung,pins = "gph2-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + bt_host_wake: bt-host-wake { + samsung,pins = "gph2-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + musb_irq: musq-irq { + samsung,pins = "gph2-7"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + tf_detect: tf-detect { + samsung,pins = "gph3-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + wifi_wake: wifi-wake { + samsung,pins = "gph3-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + }; + + magnetometer_i2c_pins: yas529-i2c-pins { + samsung,pins = "gpj0-0", "gpj0-1"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + ts_irq: ts-irq { + samsung,pins = "gpj0-5"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + vibrator_ena: vibrator-ena { + samsung,pins = "gpj1-1"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + gp2a_power: gp2a-power { + samsung,pins = "gpj1-4"; + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + touchkey_i2c_pins: touchkey-i2c-pins { + samsung,pins = "gpj3-0", "gpj3-1"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + touchkey_vdd_ena: touchkey-vdd-ena { + samsung,pins = "gpj3-2"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + musb_i2c_pins: musb-i2c-pins { + samsung,pins = "gpj3-4", "gpj3-5"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + accel_i2c_pins: accel-i2c-pins { + samsung,pins = "gpj3-6", "gpj3-7"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + pmic_i2c_pins: pmic-i2c-pins { + samsung,pins = "gpj4-0", "gpj4-3"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + touchkey_irq: touchkey-irq { + samsung,pins = "gpj4-1"; + samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>; + samsung,pin-pud = <S3C64XX_PIN_PULL_UP>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + lcd_spi_pins: spi-lcd-pins { + samsung,pins = "mp01-1", "mp04-1", "mp04-3"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + fg_i2c_pins: fg-i2c-pins { + samsung,pins = "mp05-0", "mp05-1"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + sound_i2c_pins: sound-i2c-pins { + samsung,pins = "mp05-2", "mp05-3"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; + + panel_rst: panel-rst { + samsung,pins = "mp05-5"; + samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>; + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>; + }; +}; + +&pwm { + samsung,pwm-outputs = <1>; +}; + +&rtc { + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + +&sdhci1 { + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + max-frequency = <38400000>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4 &wifi_wake &wifi_host_wake &wlan_bt_en>; + pinctrl-names = "default"; + cap-sd-highspeed; + cap-mmc-highspeed; + keep-power-in-suspend; + + mmc-pwrseq = <&wifi_pwrseq>; + non-removable; + status = "okay"; + + assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>; + assigned-clock-rates = <0>, <50000000>; + assigned-clock-parents = <&clocks MOUT_MPLL>; + + wlan@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gph2>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + }; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 GPIO_ACTIVE_LOW>; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>; + pinctrl-names = "default"; + status = "okay"; + + assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>; + assigned-clock-rates = <0>, <50000000>; + assigned-clock-parents = <&clocks MOUT_MPLL>; +}; + +&uart0 { + assigned-clocks = <&clocks MOUT_UART0>, <&clocks SCLK_UART0>; + assigned-clock-rates = <0>, <111166667>; + assigned-clock-parents = <&clocks MOUT_MPLL>; + + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4329-bt"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data &uart0_fctl &bt_host_wake + &bt_reset &bt_wake>; + shutdown-gpios = <&gpb 3 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpg3 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gph2>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; + vbus-supply = <&safe1_sreg>; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; |