Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 323 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
new file mode 100644
index 000000000..8b0ead46e
--- /dev/null
+++ b/arch/arm/boot/dts/stm32429i-eval.dts
@@ -0,0 +1,323 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+#include "stm32f429-pinctrl.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "STMicroelectronics STM32429i-EVAL board";
+	compatible = "st,stm32429i-eval", "st,stm32f429";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@00000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x2000000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+
+	clocks {
+		clk_ext_camera: clk-ext-camera {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		dma-ranges = <0xc0000000 0x0 0x10000000>;
+	};
+
+	vdda: regulator-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vref: regulator-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vdd_panel: vdd-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_panel";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green {
+			gpios = <&gpiog 6 1>;
+			linux,default-trigger = "heartbeat";
+		};
+		led-orange {
+			gpios = <&gpiog 7 1>;
+		};
+		led-red {
+			gpios = <&gpiog 10 1>;
+		};
+		led-blue {
+			gpios = <&gpiog 12 1>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		button-0 {
+			label = "Wake up";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpioa 0 0>;
+		};
+		button-1 {
+			label = "Tamper";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioc 13 0>;
+		};
+	};
+
+	usbotg_hs_phy: usbphy {
+		#phy-cells = <0>;
+		compatible = "usb-nop-xceiv";
+		clocks = <&rcc 0 STM32F4_AHB1_CLOCK(OTGHSULPI)>;
+		clock-names = "main_clk";
+	};
+
+	panel_rgb: panel-rgb {
+		compatible = "ampire,am-480272h3tmqw-t01h";
+		power-supply = <&vdd_panel>;
+		status = "okay";
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&ltdc_out_rgb>;
+			};
+		};
+	};
+
+	mmc_vcard: mmc_vcard {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc_vcard";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc3_in8_pin>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vref>;
+	status = "okay";
+	adc3: adc@200 {
+		st,adc-channels = <8>;
+		status = "okay";
+	};
+};
+
+&clk_hse {
+	clock-frequency = <25000000>;
+};
+
+&crc {
+	status = "okay";
+};
+
+&dcmi {
+	status = "okay";
+
+	port {
+		dcmi_0: endpoint {
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			pclk-sample = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ov2640: camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		resetb-gpios = <&stmpegpio 2 GPIO_ACTIVE_HIGH>;
+		pwdn-gpios = <&stmpegpio 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_ext_camera>;
+		clock-names = "xvclk";
+		status = "okay";
+
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&dcmi_0>;
+			};
+		};
+	};
+
+	stmpe1600: stmpe1600@42 {
+		compatible = "st,stmpe1600";
+		reg = <0x42>;
+		interrupts = <8 3>;
+		interrupt-parent = <&gpioi>;
+		interrupt-controller;
+		wakeup-source;
+
+		stmpegpio: stmpe_gpio {
+			compatible = "st,stmpe-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+&iwdg {
+	status = "okay";
+	timeout-sec = <32>;
+};
+
+&ltdc {
+	status = "okay";
+	pinctrl-0 = <&ltdc_pins_a>;
+	pinctrl-names = "default";
+
+	port {
+		ltdc_out_rgb: endpoint {
+			remote-endpoint = <&panel_in_rgb>;
+		};
+	};
+};
+
+&mac {
+	status = "okay";
+	pinctrl-0	= <&ethernet_mii>;
+	pinctrl-names	= "default";
+	phy-mode	= "mii";
+	phy-handle	= <&phy1>;
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+	vmmc-supply = <&mmc_vcard>;
+	cd-gpios = <&stmpegpio 15 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "opendrain";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-1 = <&sdio_pins_od>;
+	bus-width = <4>;
+	max-frequency = <12500000>;
+};
+
+&timers1 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm1_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@0 {
+		status = "okay";
+	};
+};
+
+&timers3 {
+	status = "okay";
+
+	pwm {
+		pinctrl-0 = <&pwm3_pins>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+
+	timer@2 {
+		status = "okay";
+	};
+};
+
+&usart1 {
+	pinctrl-0 = <&usart1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "host";
+	phys = <&usbotg_hs_phy>;
+	phy-names = "usb2-phy";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};