diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /arch/arm/boot/dts/tegra20-colibri.dtsi | |
parent | Initial commit. (diff) | |
download | linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/arm/boot/dts/tegra20-colibri.dtsi')
-rw-r--r-- | arch/arm/boot/dts/tegra20-colibri.dtsi | 768 |
1 files changed, 768 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/tegra20-colibri.dtsi b/arch/arm/boot/dts/tegra20-colibri.dtsi new file mode 100644 index 000000000..6162d193e --- /dev/null +++ b/arch/arm/boot/dts/tegra20-colibri.dtsi @@ -0,0 +1,768 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "tegra20.dtsi" + +/* + * Toradex Colibri T20 Module Device Tree + * Compatible for Revisions Colibri T20 256MB V1.1B, V1.2A; + * Colibri T20 256MB IT V1.2A; Colibri T20 512MB V1.1C, V1.2A; + * Colibri T20 512MB IT V1.2A + */ +/ { + memory@0 { + /* + * Set memory to 256 MB to be safe as this could be used on + * 256 or 512 MB module. It is expected from bootloader + * to fix this up for 512 MB version. + */ + reg = <0x00000000 0x10000000>; + }; + + host1x@50000000 { + hdmi@54280000 { + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + pll-supply = <®_1v8_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; + }; + }; + + pinmux@70000014 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Analogue Audio AC97 to WM9712 (On-module) */ + audio-refclk { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * AC97_RESET, ULPI_RESET, AC97_INT aka WM9712 GENIRQ + * (All on-module), SODIMM Pin 45 Wakeup + */ + gpio-uac { + nvidia,pins = "uac"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * Buffer Enables for nPWE and RDnWR (On-module, + * see GPIO hogging further down below) + */ + gpio-pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * CLK_32K_OUT, CORE_PWR_REQ, CPU_PWR_REQ, PWR_INT_N, + * SYS_CLK_REQ (All on-module) + */ + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * Colibri Address/Data Bus (GMI) + * Note: spid and spie optionally used for SPI1 + */ + gmi { + nvidia,pins = "atc", "atd", "ate", "dap1", + "dap2", "dap4", "gmd", "gpu", + "irrx", "irtx", "spia", "spib", + "spic", "spid", "spie", "uca", + "ucb"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + /* Further pins may be used as GPIOs */ + gmi-gpio1 { + nvidia,pins = "lpw0", "lsc1", "lsck", "lsda"; + nvidia,function = "hdmi"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + gmi-gpio2 { + nvidia,pins = "lcsn", "ldc", "lm0", "lsdi"; + nvidia,function = "rsvd4"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri BL_ON */ + bl-on { + nvidia,pins = "dta"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri Backlight PWM<A>, PWM<B> */ + pwm-a-b { + nvidia,pins = "sdc"; + nvidia,function = "pwm"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri DDC */ + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* + * Colibri EXT_IO* + * Note: dtf optionally used for I2C3 + */ + ext-io { + nvidia,pins = "dtf", "spdi"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* + * Colibri Ethernet (On-module) + * ULPI EHCI instance 1 USB2_DP/N -> AX88772B + */ + ulpi { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi-refclk { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Colibri HOTPLUG_DETECT (HDMI) */ + hotplug-detect { + nvidia,pins = "hdint"; + nvidia,function = "hdmi"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri I2C */ + i2c { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* + * Colibri L_BIAS, LCD_M1 is muxed with LCD_DE + * today's display need DE, disable LCD_M1 + */ + lm1 { + nvidia,pins = "lm1"; + nvidia,function = "rsvd3"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri LCD (L_* resp. LDD<*>) */ + lcd { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", + "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", + "ld12", "ld13", "ld14", "ld15", + "ld16", "ld17", "lhs", "lsc0", + "lspi", "lvs"; + nvidia,function = "displaya"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + /* Colibri LCD (Optional 24 BPP Support) */ + lcd-24 { + nvidia,pins = "ldi", "lhp0", "lhp1", "lhp2", + "lpp", "lvp1"; + nvidia,function = "displaya"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri MMC */ + mmc { + nvidia,pins = "atb", "gma"; + nvidia,function = "sdio4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri MMCCD */ + mmccd { + nvidia,pins = "gmb"; + nvidia,function = "gmi_int"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri MMC (Optional 8-bit) */ + mmc-8bit { + nvidia,pins = "gme"; + nvidia,function = "sdio4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* + * Colibri Parallel Camera (Optional) + * pins multiplexed with others and therefore disabled + * Note: dta used for BL_ON by default + */ + cif-mclk { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + cif { + nvidia,pins = "dtb", "dtc", "dtd"; + nvidia,function = "vi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri PWM<C>, PWM<D> */ + pwm-c-d { + nvidia,pins = "sdb", "sdd"; + nvidia,function = "pwm"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri SSP */ + ssp { + nvidia,pins = "slxa", "slxc", "slxd", "slxk"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri UART-A */ + uart-a { + nvidia,pins = "sdio1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + uart-a-dsr { + nvidia,pins = "lpw1"; + nvidia,function = "rsvd3"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + uart-a-dcd { + nvidia,pins = "lpw2"; + nvidia,function = "hdmi"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri UART-B */ + uart-b { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri UART-C */ + uart-c { + nvidia,pins = "uad"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USB_CDET */ + usb-cdet { + nvidia,pins = "spdo"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USBH_OC */ + usbh-oc { + nvidia,pins = "spih"; + nvidia,function = "spi2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri USBH_PEN */ + usbh-pen { + nvidia,pins = "spig"; + nvidia,function = "spi2_alt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Colibri VGA not supported */ + vga { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* I2C3 (Optional) */ + i2c3 { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* JTAG_RTCK */ + jtag-rtck { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* + * LAN_RESET, LAN_EXT_WAKEUP and LAN_PME + * (All On-module) + */ + gpio-gpv { + nvidia,pins = "gpv"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * LAN_V_BUS, VDD_FAULT, BATT_FAULT, WM9712 PENDOWN + * (All On-module); Colibri CAN_INT + */ + gpio-dte { + nvidia,pins = "dte"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* NAND (On-module) */ + nand { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "nand"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* Onewire (Optional) */ + owr { + nvidia,pins = "owc"; + nvidia,function = "owr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* Power I2C (On-module) */ + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* RESET_OUT */ + reset-out { + nvidia,pins = "ata"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + /* + * SPI1 (Optional) + * Note: spid and spie used for Colibri Address/Data + * Bus (GMI) + */ + spi1 { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + + /* + * THERMD_ALERT# (On-module), unlatched I2C address pin + * of LM95245 temperature sensor therefore requires + * disabling for now + */ + lvp0 { + nvidia,pins = "lvp0"; + nvidia,function = "rsvd3"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + tegra_ac97: ac97@70002000 { + status = "okay"; + nvidia,codec-reset-gpio = + <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>; + nvidia,codec-sync-gpio = + <&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>; + }; + + serial@70006040 { + compatible = "nvidia,tegra20-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra20-hsuart"; + }; + + nand-controller@70008000 { + status = "okay"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <8>; + nand-on-flash-bbt; + nand-ecc-algo = "bch"; + nand-is-boot-medium; + nand-ecc-maximize; + wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; + }; + }; + + /* + * GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + clock-frequency = <400000>; + }; + + /* DDC_SCL/SDA on X3 pin 15/16 (e.g. display EDID) */ + hdmi_ddc: i2c@7000c400 { + clock-frequency = <10000>; + }; + + /* GEN2_I2C: unused */ + + /* CAM/GEN3_I2C: used as EXT_IO1/2 GPIOs on SODIMM pin 133/127 */ + + /* PWR_I2C: power I2C to PMIC and temperature sensor (On-module) */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + pmic@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + ti,system-power-controller; + #gpio-cells = <2>; + gpio-controller; + sys-supply = <®_module_3v3>; + vin-sm0-supply = <®_3v3_vsys>; + vin-sm1-supply = <®_3v3_vsys>; + vin-sm2-supply = <®_3v3_vsys>; + vinldo01-supply = <®_1v8_vdd_ddr2>; + vinldo23-supply = <®_module_3v3>; + vinldo4-supply = <®_module_3v3>; + vinldo678-supply = <®_module_3v3>; + vinldo9-supply = <®_module_3v3>; + + regulators { + reg_3v3_vsys: sys { + regulator-name = "VSYS_3.3V"; + regulator-always-on; + }; + + sm0 { + regulator-name = "VDD_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + sm1 { + regulator-name = "VDD_CPU_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + reg_1v8_vdd_ddr2: sm2 { + regulator-name = "VDD_DDR2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + /* + * +3.3V_ENABLE_N switching via FET: + * AVDD_AUDIO_S and +3.3V + * see also +3.3V fixed supply + */ + ldo1 { + regulator-name = "AVDD_PLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo2 { + regulator-name = "VDD_RTC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* LDO3 is not connected to anything */ + + ldo4 { + regulator-name = "VDDIO_SYS_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* Switched via FET from regular +3.3V */ + ldo5 { + regulator-name = "+3.3V_USB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6 { + regulator-name = "AVDD_VDAC_2.85V"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + reg_3v3_avdd_hdmi: ldo7 { + regulator-name = "AVDD_HDMI_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_1v8_avdd_hdmi_pll: ldo8 { + regulator-name = "AVDD_HDMI_PLL_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9 { + regulator-name = "VDDIO_RX_DDR_2.85V"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + ldo_rtc { + regulator-name = "VCC_BATT"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + /* LM95245 temperature sensor */ + temp-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + }; + + pmc@7000e400 { + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <3875>; + nvidia,sys-clock-req-active-high; + + /* Set SLEEP MODE bit in SUPPLYENE register of TPS658643 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <3>; + nvidia,bus-addr = <0x34>; + nvidia,reg-addr = <0x14>; + nvidia,reg-data = <0x8>; + }; + }; + + memory-controller@7000f400 { + emc-table@83250 { + reg = <83250>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <83250>; + nvidia,emc-registers = <0x00000005 0x00000011 + 0x00000004 0x00000002 0x00000004 0x00000004 + 0x00000001 0x0000000a 0x00000002 0x00000002 + 0x00000001 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x0000025f + 0x00000000 0x00000003 0x00000003 0x00000002 + 0x00000002 0x00000001 0x00000008 0x000000c8 + 0x00000003 0x00000005 0x00000003 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x00520006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + emc-table@133200 { + reg = <133200>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <133200>; + nvidia,emc-registers = <0x00000008 0x00000019 + 0x00000006 0x00000002 0x00000004 0x00000004 + 0x00000001 0x0000000a 0x00000002 0x00000002 + 0x00000002 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x0000039f + 0x00000000 0x00000003 0x00000003 0x00000002 + 0x00000002 0x00000001 0x00000008 0x000000c8 + 0x00000003 0x00000007 0x00000003 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x00510006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + emc-table@166500 { + reg = <166500>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <166500>; + nvidia,emc-registers = <0x0000000a 0x00000021 + 0x00000008 0x00000003 0x00000004 0x00000004 + 0x00000002 0x0000000a 0x00000003 0x00000003 + 0x00000002 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x000004df + 0x00000000 0x00000003 0x00000003 0x00000003 + 0x00000003 0x00000001 0x00000009 0x000000c8 + 0x00000003 0x00000009 0x00000004 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x004f0006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + emc-table@333000 { + reg = <333000>; + compatible = "nvidia,tegra20-emc-table"; + clock-frequency = <333000>; + nvidia,emc-registers = <0x00000014 0x00000041 + 0x0000000f 0x00000005 0x00000004 0x00000005 + 0x00000003 0x0000000a 0x00000005 0x00000005 + 0x00000004 0x00000001 0x00000003 0x00000004 + 0x00000003 0x00000009 0x0000000c 0x000009ff + 0x00000000 0x00000003 0x00000003 0x00000005 + 0x00000005 0x00000001 0x0000000e 0x000000c8 + 0x00000003 0x00000011 0x00000006 0x0000000c + 0x00000002 0x00000000 0x00000000 0x00000002 + 0x00000000 0x00000000 0x00000083 0x00380006 + 0x00000010 0x00000008 0x00000000 0x00000000 + 0x00000000 0x00000000 0x00000000 0x00000000>; + }; + }; + + /* EHCI instance 1: ULPI PHY -> AX88772B (On-module) */ + usb@c5004000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + asix@1 { + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; + + usb-phy@c5004000 { + status = "okay"; + nvidia,phy-reset-gpio = + <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; + vbus-supply = <®_lan_v_bus>; + }; + + clk32k_in: xtal3 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + reg_lan_v_bus: regulator-lan-v-bus { + compatible = "regulator-fixed"; + regulator-name = "LAN_V_BUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; + }; + + reg_module_3v3: regulator-module-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + sound { + compatible = "nvidia,tegra-audio-wm9712-colibri_t20", + "nvidia,tegra-audio-wm9712"; + nvidia,model = "Toradex Colibri T20"; + nvidia,audio-routing = + "Headphone", "HPOUTL", + "Headphone", "HPOUTR", + "LineIn", "LINEINL", + "LineIn", "LINEINR", + "Mic", "MIC1"; + nvidia,ac97-controller = <&tegra_ac97>; + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; +}; + +&gpio { + lan-reset-n { + gpio-hog; + gpios = <TEGRA_GPIO(V, 4) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LAN_RESET#"; + }; + + /* Tri-stating GMI_WR_N on SODIMM pin 99 nPWE */ + npwe { + gpio-hog; + gpios = <TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "Tri-state nPWE"; + }; + + /* Not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR */ + rdnwr { + gpio-hog; + gpios = <TEGRA_GPIO(T, 6) GPIO_ACTIVE_HIGH>; + output-low; + line-name = "Not tri-state RDnWR"; + }; +}; |