Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 152 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
new file mode 100644
index 000000000..c12a1b8bc
--- /dev/null
+++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2020 Toradex
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk16m: clk16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+	};
+
+	panel: panel {
+		compatible = "edt,et057090dhu";
+		backlight = <&bl>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dcu_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbh_vbus: regulator-usbh-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_reg>;
+		regulator-name = "VCC_USB[1-4]";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_LOW>; /* USBH_PEN resp. USBH_P_EN */
+		vin-supply = <&reg_5v0>;
+	};
+};
+
+&bl {
+	brightness-levels = <0 4 8 16 32 64 128 255>;
+	default-brightness-level = <6>;
+	power-supply = <&reg_3v3>;
+	status  = "okay";
+};
+
+&dcu0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dcu0_1>;
+	status = "okay";
+
+	port {
+		dcu_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&dspi1 {
+	status = "okay";
+
+	mcp2515can: can@0 {
+		compatible = "microchip,mcp2515";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_int>;
+		reg = <0>;
+		clocks = <&clk16m>;
+		spi-max-frequency = <10000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc: m41t0m6@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_module_3v3 {
+	vin-supply = <&reg_3v3>;
+};
+
+&tcon0 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh_vbus>;
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_can_int: can_int {
+			fsl,pins = <
+				VF610_PAD_PTB21__GPIO_43	0x22ed
+			>;
+		};
+	};
+};