Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 169 insertions, 0 deletions

diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c
new file mode 100644
index 000000000..641e1f8fc
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm63xx_smp.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Broadcom BCM63138 DSL SoCs SMP support code
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/vfp.h>
+
+#include "bcm63xx_smp.h"
+
+/* Size of mapped Cortex A9 SCU address space */
+#define CORTEX_A9_SCU_SIZE	0x58
+
+/*
+ * Enable the Cortex A9 Snoop Control Unit
+ *
+ * By the time this is called we already know there are multiple
+ * cores present.  We assume we're running on a Cortex A9 processor,
+ * so any trouble getting the base address register or getting the
+ * SCU base is a problem.
+ *
+ * Return 0 if successful or an error code otherwise.
+ */
+static int __init scu_a9_enable(void)
+{
+	unsigned long config_base;
+	void __iomem *scu_base;
+	unsigned int i, ncores;
+
+	if (!scu_a9_has_base()) {
+		pr_err("no configuration base address register!\n");
+		return -ENXIO;
+	}
+
+	/* Config base address register value is zero for uniprocessor */
+	config_base = scu_a9_get_base();
+	if (!config_base) {
+		pr_err("hardware reports only one core\n");
+		return -ENOENT;
+	}
+
+	scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
+	if (!scu_base) {
+		pr_err("failed to remap config base (%lu/%u) for SCU\n",
+			config_base, CORTEX_A9_SCU_SIZE);
+		return -ENOMEM;
+	}
+
+	scu_enable(scu_base);
+
+	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+	if (ncores > nr_cpu_ids) {
+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+				ncores, nr_cpu_ids);
+		ncores = nr_cpu_ids;
+	}
+
+	/* The BCM63138 SoC has two Cortex-A9 CPUs, CPU0 features a complete
+	 * and fully functional VFP unit that can be used, but CPU1 does not.
+	 * Since we will not be able to trap kernel-mode NEON to force
+	 * migration to CPU0, just do not advertise VFP support at all.
+	 *
+	 * This will make vfp_init bail out and do not attempt to use VFP at
+	 * all, for kernel-mode NEON, we do not want to introduce any
+	 * conditionals in hot-paths, so we just restrict the system to UP.
+	 */
+#ifdef CONFIG_VFP
+	if (ncores > 1) {
+		pr_warn("SMP: secondary CPUs lack VFP unit, disabling VFP\n");
+		vfp_disable();
+
+#ifdef CONFIG_KERNEL_MODE_NEON
+		WARN(1, "SMP: kernel-mode NEON enabled, restricting to UP\n");
+		ncores = 1;
+#endif
+	}
+#endif
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+
+	iounmap(scu_base);	/* That's the last we'll need of this */
+
+	return 0;
+}
+
+static const struct of_device_id bcm63138_bootlut_ids[] = {
+	{ .compatible = "brcm,bcm63138-bootlut", },
+	{ /* sentinel */ },
+};
+
+#define BOOTLUT_RESET_VECT	0x20
+
+static int bcm63138_smp_boot_secondary(unsigned int cpu,
+				       struct task_struct *idle)
+{
+	void __iomem *bootlut_base;
+	struct device_node *dn;
+	int ret = 0;
+	u32 val;
+
+	dn = of_find_matching_node(NULL, bcm63138_bootlut_ids);
+	if (!dn) {
+		pr_err("SMP: unable to find bcm63138 boot LUT node\n");
+		return -ENODEV;
+	}
+
+	bootlut_base = of_iomap(dn, 0);
+	of_node_put(dn);
+
+	if (!bootlut_base) {
+		pr_err("SMP: unable to remap boot LUT base register\n");
+		return -ENOMEM;
+	}
+
+	/* Locate the secondary CPU node */
+	dn = of_get_cpu_node(cpu, NULL);
+	if (!dn) {
+		pr_err("SMP: failed to locate secondary CPU%d node\n", cpu);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* Write the secondary init routine to the BootLUT reset vector */
+	val = __pa_symbol(secondary_startup);
+	writel_relaxed(val, bootlut_base + BOOTLUT_RESET_VECT);
+
+	/* Power up the core, will jump straight to its reset vector when we
+	 * return
+	 */
+	ret = bcm63xx_pmb_power_on_cpu(dn);
+	of_node_put(dn);
+	if (ret)
+		goto out;
+out:
+	iounmap(bootlut_base);
+
+	return ret;
+}
+
+static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus)
+{
+	int ret;
+
+	ret = scu_a9_enable();
+	if (ret) {
+		pr_warn("SMP: Cortex-A9 SCU setup failed\n");
+		return;
+	}
+}
+
+static const struct smp_operations bcm63138_smp_ops __initconst = {
+	.smp_prepare_cpus	= bcm63138_smp_prepare_cpus,
+	.smp_boot_secondary	= bcm63138_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(bcm63138_smp, "brcm,bcm63138", &bcm63138_smp_ops);