Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 237 insertions, 0 deletions

diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
new file mode 100644
index 000000000..b30221f7d
--- /dev/null
+++ b/arch/arm/mach-davinci/Kconfig
@@ -0,0 +1,237 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menuconfig ARCH_DAVINCI
+	bool "TI DaVinci"
+	depends on ARCH_MULTI_V5
+	select CPU_ARM926T
+	select DAVINCI_TIMER
+	select ZONE_DMA
+	select PM_GENERIC_DOMAINS if PM
+	select PM_GENERIC_DOMAINS_OF if PM && OF
+	select REGMAP_MMIO
+	select RESET_CONTROLLER
+	select HAVE_IDE
+	select PINCTRL_SINGLE
+
+if ARCH_DAVINCI
+
+config ARCH_DAVINCI_DMx
+	bool
+
+comment "DaVinci Core Type"
+
+config ARCH_DAVINCI_DM644x
+	bool "DaVinci 644x based system"
+	select DAVINCI_AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DM355
+	bool "DaVinci 355 based system"
+	select DAVINCI_AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DM646x
+	bool "DaVinci 646x based system"
+	select DAVINCI_AINTC
+	select ARCH_DAVINCI_DMx
+
+config ARCH_DAVINCI_DA830
+	bool "DA830/OMAP-L137/AM17x based system"
+	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+	select ARCH_DAVINCI_DA8XX
+	# needed on silicon revs 1.0, 1.1:
+	select CPU_DCACHE_WRITETHROUGH if !CPU_DCACHE_DISABLE
+	select DAVINCI_CP_INTC
+
+config ARCH_DAVINCI_DA850
+	bool "DA850/OMAP-L138/AM18x based system"
+	depends on !ARCH_DAVINCI_DMx || (AUTO_ZRELADDR && ARM_PATCH_PHYS_VIRT)
+	select ARCH_DAVINCI_DA8XX
+	select DAVINCI_CP_INTC
+
+config ARCH_DAVINCI_DA8XX
+	bool
+
+config ARCH_DAVINCI_DM365
+	bool "DaVinci 365 based system"
+	select DAVINCI_AINTC
+	select ARCH_DAVINCI_DMx
+
+comment "DaVinci Board Type"
+
+config MACH_DA8XX_DT
+	bool "Support DA8XX platforms using device tree"
+	default y
+	depends on ARCH_DAVINCI_DA850
+	select PINCTRL
+	help
+	  Say y here to include support for TI DaVinci DA850 based using
+	  Flattened Device Tree. More information at Documentation/devicetree
+
+config MACH_DAVINCI_EVM
+	bool "TI DM644x EVM"
+	default ARCH_DAVINCI_DM644x
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM644x EVM
+
+config MACH_SFFSDR
+	bool "Lyrtech SFFSDR"
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Say Y here to select the Lyrtech Small Form Factor
+	  Software Defined Radio (SFFSDR) board.
+
+config MACH_NEUROS_OSD2
+	bool "Neuros OSD2 Open Television Set Top Box"
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a Neuros OSD2 Open Set Top Box.
+
+config MACH_DAVINCI_DM355_EVM
+	bool "TI DM355 EVM"
+	default ARCH_DAVINCI_DM355
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+	bool "DM355 Leopard board"
+	depends on ARCH_DAVINCI_DM355
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+	bool "TI DM6467 EVM"
+	default ARCH_DAVINCI_DM646x
+	depends on ARCH_DAVINCI_DM646x
+	select MACH_DAVINCI_DM6467TEVM
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DM6467 EVM
+
+config MACH_DAVINCI_DM6467TEVM
+	bool
+
+config MACH_DAVINCI_DM365_EVM
+	bool "TI DM365 EVM"
+	default ARCH_DAVINCI_DM365
+	depends on ARCH_DAVINCI_DM365
+	help
+	  Configure this option to specify whether the board used
+	  for development is a DM365 EVM
+
+config MACH_DAVINCI_DA830_EVM
+	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
+	default ARCH_DAVINCI_DA830
+	depends on ARCH_DAVINCI_DA830
+	select GPIO_PCF857X if I2C
+	help
+	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
+
+choice
+	prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
+	depends on MACH_DAVINCI_DA830_EVM
+	help
+	  The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
+	  detected automatically based on successful probe of the I2C
+	  based GPIO expander on that board. This option selected in this
+	  menu has an effect only in case of a successful UI card detection.
+
+config DA830_UI_LCD
+	bool "LCD"
+	help
+	  Say Y here to use the LCD as a framebuffer or simple character
+	  display.
+
+config DA830_UI_NAND
+	bool "NAND flash"
+	help
+	  Say Y here to use the NAND flash. Do not forget to setup
+	  the switch correctly.
+endchoice
+
+config MACH_DAVINCI_DA850_EVM
+	bool "TI DA850/OMAP-L138/AM18x Reference Platform"
+	default ARCH_DAVINCI_DA850
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
+
+choice
+	prompt "Select peripherals connected to expander on UI board"
+	depends on MACH_DAVINCI_DA850_EVM
+	help
+	  The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
+	  EVM is detected automatically based on successful probe of the I2C
+	  based GPIO expander on that card. This option selected in this
+	  menu has an effect only in case of a successful UI card detection.
+
+config DA850_UI_NONE
+	bool "No peripheral is enabled"
+	help
+	  Say Y if you do not want to enable any of the peripherals connected
+	  to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
+
+config DA850_UI_RMII
+	bool "RMII Ethernet PHY"
+	help
+	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
+	  EVM. This PHY is found on the UI daughter card that is supplied with
+	  the EVM.
+	  NOTE: Please take care while choosing this option, MII PHY will
+	  not be functional if RMII mode is selected.
+
+config DA850_UI_SD_VIDEO_PORT
+	bool "Video Port Interface"
+	help
+	  Say Y if you want to use Video Port Interface (VPIF) on the
+	  DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
+	  UI daughter card that is supplied with the EVM.
+
+endchoice
+
+config MACH_MITYOMAPL138
+	bool "Critical Link MityDSP-L138/MityARM-1808 SoM"
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the Critical Link MityDSP-L138/MityARM-1808
+	  System on Module.  Information on this SoM may be found at
+	  https://www.mitydsp.com
+
+config MACH_OMAPL138_HAWKBOARD
+	bool "TI AM1808 / OMAPL-138 Hawkboard platform"
+	depends on ARCH_DAVINCI_DA850
+	help
+	  Say Y here to select the TI AM1808 / OMAPL-138 Hawkboard platform .
+
+config DAVINCI_MUX
+	bool "DAVINCI multiplexing support"
+	depends on ARCH_DAVINCI
+	default y
+	help
+	  Pin multiplexing support for DAVINCI boards. If your bootloader
+	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
+	  say Y.
+
+config DAVINCI_MUX_DEBUG
+	bool "Multiplexing debug output"
+	depends on DAVINCI_MUX
+	help
+	  Makes the multiplexing functions print out a lot of debug info.
+	  This is useful if you want to find out the correct values of the
+	  multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+	bool "Warn about pins the bootloader didn't set up"
+	depends on DAVINCI_MUX
+	help
+	  Choose Y here to warn whenever driver initialization logic needs
+	  to change the pin multiplexing setup. When there are no warnings
+	  printed, it's safe to deselect DAVINCI_MUX for your product.
+
+endif