Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 144 insertions, 0 deletions

diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
new file mode 100644
index 000000000..7ca43ca28
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/arm/mach-ixp4xx/coyote-setup.c
+ *
+ * Board setup for ADI Engineering and IXDGP425 boards
+ *
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_8250.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+#include "irqs.h"
+
+#define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
+#define COYOTE_IDE_BASE_VIRT	0xFFFE1000
+#define COYOTE_IDE_REGION_SIZE	0x1000
+
+#define COYOTE_IDE_DATA_PORT	0xFFFE10E0
+#define COYOTE_IDE_CTRL_PORT	0xFFFE10FC
+#define COYOTE_IDE_ERROR_PORT	0xFFFE10E2
+#define IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
+
+static struct flash_platform_data coyote_flash_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+};
+
+static struct resource coyote_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device coyote_flash = {
+	.name		= "IXP4XX-Flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data = &coyote_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &coyote_flash_resource,
+};
+
+static struct resource coyote_uart_resource = {
+	.start	= IXP4XX_UART2_BASE_PHYS,
+	.end	= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct plat_serial8250_port coyote_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	},
+	{ },
+};
+
+static struct platform_device coyote_uart = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= coyote_uart_data,
+	},
+	.num_resources	= 1,
+	.resource	= &coyote_uart_resource,
+};
+
+static struct platform_device *coyote_devices[] __initdata = {
+	&coyote_flash,
+	&coyote_uart
+};
+
+static void __init coyote_init(void)
+{
+	ixp4xx_sys_init();
+
+	coyote_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+	coyote_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
+
+	*IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
+	*IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
+
+	if (machine_is_ixdpg425()) {
+		coyote_uart_data[0].membase =
+			(char*)(IXP4XX_UART1_BASE_VIRT + REG_OFFSET);
+		coyote_uart_data[0].mapbase = IXP4XX_UART1_BASE_PHYS;
+		coyote_uart_data[0].irq = IRQ_IXP4XX_UART1;
+	}
+
+	platform_add_devices(coyote_devices, ARRAY_SIZE(coyote_devices));
+}
+
+#ifdef CONFIG_ARCH_ADI_COYOTE
+MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
+	/* Maintainer: MontaVista Software, Inc. */
+	.map_io		= ixp4xx_map_io,
+	.init_early	= ixp4xx_init_early,
+	.init_irq	= ixp4xx_init_irq,
+	.init_time	= ixp4xx_timer_init,
+	.atag_offset	= 0x100,
+	.init_machine	= coyote_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
+	.restart	= ixp4xx_restart,
+MACHINE_END
+#endif
+
+/*
+ * IXDPG425 is identical to Coyote except for which serial port
+ * is connected.
+ */
+#ifdef CONFIG_MACH_IXDPG425
+MACHINE_START(IXDPG425, "Intel IXDPG425")
+	/* Maintainer: MontaVista Software, Inc. */
+	.map_io		= ixp4xx_map_io,
+	.init_early	= ixp4xx_init_early,
+	.init_irq	= ixp4xx_init_irq,
+	.init_time	= ixp4xx_timer_init,
+	.atag_offset	= 0x100,
+	.init_machine	= coyote_init,
+	.restart	= ixp4xx_restart,
+MACHINE_END
+#endif
+