Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

14 files changed, 1849 insertions, 0 deletions

diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig
new file mode 100644
index 000000000..ea52c7fab
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Kconfig
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_MV78XX0
+	bool "Marvell MV78xx0"
+	depends on ARCH_MULTI_V5
+	select CPU_FEROCEON
+	select GPIOLIB
+	select MVEBU_MBUS
+	select FORCE_PCI
+	select PLAT_ORION_LEGACY
+	help
+	  Support for the following Marvell MV78xx0 series SoCs:
+	  MV781x0, MV782x0.
+
+if ARCH_MV78XX0
+
+config MACH_DB78X00_BP
+	bool "Marvell DB-78x00-BP Development Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DB-78x00-BP Development Board.
+
+config MACH_RD78X00_MASA
+	bool "Marvell RD-78x00-mASA Reference Design"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell RD-78x00-mASA Reference Design.
+
+config MACH_TERASTATION_WXL
+	bool "Buffalo WLX (Terastation Duo) NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo WXL Nas.
+
+endif
diff --git a/arch/arm/mach-mv78xx0/Makefile b/arch/arm/mach-mv78xx0/Makefile
new file mode 100644
index 000000000..a839e960b
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
+obj-y				+= common.o mpp.o irq.o pcie.o
+obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
+obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o
+obj-$(CONFIG_MACH_TERASTATION_WXL) += buffalo-wxl-setup.o
diff --git a/arch/arm/mach-mv78xx0/bridge-regs.h b/arch/arm/mach-mv78xx0/bridge-regs.h
new file mode 100644
index 000000000..2f54e1753
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/bridge-regs.h
@@ -0,0 +1,35 @@
+/*
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include "mv78xx0.h"
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
+#define L2_WRITETHROUGH		0x00020000
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS	(BRIDGE_PHYS_BASE + 0x0108)
+#define SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE + 0x010c)
+#define SOFT_RESET		0x00000001
+
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0200)
+#define IRQ_CAUSE_ERR_OFF	0x0000
+#define IRQ_CAUSE_LOW_OFF	0x0004
+#define IRQ_CAUSE_HIGH_OFF	0x0008
+#define IRQ_MASK_ERR_OFF	0x000c
+#define IRQ_MASK_LOW_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE + 0x0300)
+#define TIMER_PHYS_BASE		(BRIDGE_PHYS_BASE + 0x0300)
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
new file mode 100644
index 000000000..e112f2e7c
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -0,0 +1,156 @@
+/*
+ * arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+ *
+ * Buffalo WXL (Terastation Duo) Setup routines
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "mv78xx0.h"
+#include "common.h"
+#include "mpp.h"
+
+
+/* This arch has 2 Giga Ethernet */
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+
+/* 2 SATA controller supporting HotPlug */
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+	I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
+static unsigned int wxl_mpp_config[] __initdata = {
+	MPP0_GE1_TXCLK,
+	MPP1_GE1_TXCTL,
+	MPP2_GE1_RXCTL,
+	MPP3_GE1_RXCLK,
+	MPP4_GE1_TXD0,
+	MPP5_GE1_TXD1,
+	MPP6_GE1_TXD2,
+	MPP7_GE1_TXD3,
+	MPP8_GE1_RXD0,
+	MPP9_GE1_RXD1,
+	MPP10_GE1_RXD2,
+	MPP11_GE1_RXD3,
+	MPP12_GPIO,
+	MPP13_SYSRST_OUTn,
+	MPP14_SATA1_ACTn,
+	MPP15_SATA0_ACTn,
+	MPP16_GPIO,
+	MPP17_GPIO,
+	MPP18_GPIO,
+	MPP19_GPIO,
+	MPP20_GPIO,
+	MPP21_GPIO,
+	MPP22_GPIO,
+	MPP23_GPIO,
+	MPP24_UA2_TXD,
+	MPP25_UA2_RXD,
+	MPP26_UA2_CTSn,
+	MPP27_UA2_RTSn,
+	MPP28_GPIO,
+	MPP29_SYSRST_OUTn,
+	MPP30_GPIO,
+	MPP31_GPIO,
+	MPP32_GPIO,
+	MPP33_GPIO,
+	MPP34_GPIO,
+	MPP35_GPIO,
+	MPP36_GPIO,
+	MPP37_GPIO,
+	MPP38_GPIO,
+	MPP39_GPIO,
+	MPP40_UNUSED,
+	MPP41_UNUSED,
+	MPP42_UNUSED,
+	MPP43_UNUSED,
+	MPP44_UNUSED,
+	MPP45_UNUSED,
+	MPP46_UNUSED,
+	MPP47_UNUSED,
+	MPP48_SATA1_ACTn,
+	MPP49_SATA0_ACTn,
+	0
+};
+
+
+static void __init wxl_init(void)
+{
+	/*
+	 * Basic MV78xx0 setup. Needs to be called early.
+	 */
+	mv78xx0_init();
+	mv78xx0_mpp_conf(wxl_mpp_config);
+
+	/*
+	 * Partition on-chip peripherals between the two CPU cores.
+	 */
+	mv78xx0_ehci0_init();
+	mv78xx0_ehci1_init();
+	mv78xx0_ehci2_init();
+	mv78xx0_ge00_init(&db78x00_ge00_data);
+	mv78xx0_ge01_init(&db78x00_ge01_data);
+	mv78xx0_sata_init(&db78x00_sata_data);
+	mv78xx0_uart0_init();
+	mv78xx0_uart1_init();
+	mv78xx0_uart2_init();
+	mv78xx0_uart3_init();
+	mv78xx0_i2c_init();
+	i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+}
+
+static int __init wxl_pci_init(void)
+{
+	if (machine_is_terastation_wxl()) {
+		/*
+		 * Assign the x16 PCIe slot on the board to CPU core
+		 * #0, and let CPU core #1 have the four x1 slots.
+		 */
+		if (mv78xx0_core_index() == 0)
+			mv78xx0_pcie_init(0, 1);
+		else
+			mv78xx0_pcie_init(1, 0);
+	}
+
+	return 0;
+}
+subsys_initcall(wxl_pci_init);
+
+MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
+	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
+	.init_machine	= wxl_init,
+	.map_io		= mv78xx0_map_io,
+	.init_early	= mv78xx0_init_early,
+	.init_irq	= mv78xx0_init_irq,
+	.init_time	= mv78xx0_timer_init,
+	.restart	= mv78xx0_restart,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
new file mode 100644
index 000000000..dd762d1b0
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -0,0 +1,424 @@
+/*
+ * arch/arm/mach-mv78xx0/common.c
+ *
+ * Core functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/ata_platform.h>
+#include <linux/clk-provider.h>
+#include <linux/ethtool.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <plat/time.h>
+#include <plat/common.h>
+#include <plat/addr-map.h>
+#include "mv78xx0.h"
+#include "bridge-regs.h"
+#include "common.h"
+
+static int get_tclk(void);
+
+/*****************************************************************************
+ * Common bits
+ ****************************************************************************/
+int mv78xx0_core_index(void)
+{
+	u32 extra;
+
+	/*
+	 * Read Extra Features register.
+	 */
+	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra));
+
+	return !!(extra & 0x00004000);
+}
+
+static int get_hclk(void)
+{
+	int hclk;
+
+	/*
+	 * HCLK tick rate is configured by DEV_D[7:5] pins.
+	 */
+	switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) {
+	case 0:
+		hclk = 166666667;
+		break;
+	case 1:
+		hclk = 200000000;
+		break;
+	case 2:
+		hclk = 266666667;
+		break;
+	case 3:
+		hclk = 333333333;
+		break;
+	case 4:
+		hclk = 400000000;
+		break;
+	default:
+		panic("unknown HCLK PLL setting: %.8x\n",
+			readl(SAMPLE_AT_RESET_LOW));
+	}
+
+	return hclk;
+}
+
+static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk)
+{
+	u32 cfg;
+
+	/*
+	 * Core #0 PCLK/L2CLK is configured by bits [13:8], core #1
+	 * PCLK/L2CLK by bits [19:14].
+	 */
+	if (core_index == 0) {
+		cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f;
+	} else {
+		cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f;
+	}
+
+	/*
+	 * Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK
+	 * ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6).
+	 */
+	*pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1;
+
+	/*
+	 * Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK
+	 * ratio (1, 2, 3).
+	 */
+	*l2clk = *pclk / (((cfg >> 4) & 3) + 1);
+}
+
+static int get_tclk(void)
+{
+	int tclk_freq;
+
+	/*
+	 * TCLK tick rate is configured by DEV_A[2:0] strap pins.
+	 */
+	switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) {
+	case 1:
+		tclk_freq = 166666667;
+		break;
+	case 3:
+		tclk_freq = 200000000;
+		break;
+	default:
+		panic("unknown TCLK PLL setting: %.8x\n",
+			readl(SAMPLE_AT_RESET_HIGH));
+	}
+
+	return tclk_freq;
+}
+
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc mv78xx0_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long) MV78XX0_CORE_REGS_VIRT_BASE,
+		.pfn		= 0,
+		.length		= MV78XX0_CORE_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long) MV78XX0_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
+		.length		= MV78XX0_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init mv78xx0_map_io(void)
+{
+	unsigned long phys;
+
+	/*
+	 * Map the right set of per-core registers depending on
+	 * which core we are running on.
+	 */
+	if (mv78xx0_core_index() == 0) {
+		phys = MV78XX0_CORE0_REGS_PHYS_BASE;
+	} else {
+		phys = MV78XX0_CORE1_REGS_PHYS_BASE;
+	}
+	mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys);
+
+	iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc));
+}
+
+
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+static void __init clk_init(void)
+{
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, get_tclk());
+
+	orion_clkdev_init(tclk);
+}
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+void __init mv78xx0_ehci0_init(void)
+{
+	orion_ehci_init(USB0_PHYS_BASE, IRQ_MV78XX0_USB_0, EHCI_PHY_NA);
+}
+
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+void __init mv78xx0_ehci1_init(void)
+{
+	orion_ehci_1_init(USB1_PHYS_BASE, IRQ_MV78XX0_USB_1);
+}
+
+
+/*****************************************************************************
+ * EHCI2
+ ****************************************************************************/
+void __init mv78xx0_ehci2_init(void)
+{
+	orion_ehci_2_init(USB2_PHYS_BASE, IRQ_MV78XX0_USB_2);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	orion_ge00_init(eth_data,
+			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
+			IRQ_MV78XX0_GE_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
+}
+
+
+/*****************************************************************************
+ * GE01
+ ****************************************************************************/
+void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	orion_ge01_init(eth_data,
+			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
+}
+
+
+/*****************************************************************************
+ * GE10
+ ****************************************************************************/
+void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	u32 dev, rev;
+
+	/*
+	 * On the Z0, ge10 and ge11 are internally connected back
+	 * to back, and not brought out.
+	 */
+	mv78xx0_pcie_id(&dev, &rev);
+	if (dev == MV78X00_Z0_DEV_ID) {
+		eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
+		eth_data->speed = SPEED_1000;
+		eth_data->duplex = DUPLEX_FULL;
+	}
+
+	orion_ge10_init(eth_data, GE10_PHYS_BASE, IRQ_MV78XX0_GE10_SUM);
+}
+
+
+/*****************************************************************************
+ * GE11
+ ****************************************************************************/
+void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	u32 dev, rev;
+
+	/*
+	 * On the Z0, ge10 and ge11 are internally connected back
+	 * to back, and not brought out.
+	 */
+	mv78xx0_pcie_id(&dev, &rev);
+	if (dev == MV78X00_Z0_DEV_ID) {
+		eth_data->phy_addr = MV643XX_ETH_PHY_NONE;
+		eth_data->speed = SPEED_1000;
+		eth_data->duplex = DUPLEX_FULL;
+	}
+
+	orion_ge11_init(eth_data, GE11_PHYS_BASE, IRQ_MV78XX0_GE11_SUM);
+}
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+void __init mv78xx0_i2c_init(void)
+{
+	orion_i2c_init(I2C_0_PHYS_BASE, IRQ_MV78XX0_I2C_0, 8);
+	orion_i2c_1_init(I2C_1_PHYS_BASE, IRQ_MV78XX0_I2C_1, 8);
+}
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	orion_sata_init(sata_data, SATA_PHYS_BASE, IRQ_MV78XX0_SATA);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+void __init mv78xx0_uart0_init(void)
+{
+	orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
+			 IRQ_MV78XX0_UART_0, tclk);
+}
+
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+void __init mv78xx0_uart1_init(void)
+{
+	orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
+			 IRQ_MV78XX0_UART_1, tclk);
+}
+
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+void __init mv78xx0_uart2_init(void)
+{
+	orion_uart2_init(UART2_VIRT_BASE, UART2_PHYS_BASE,
+			 IRQ_MV78XX0_UART_2, tclk);
+}
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+void __init mv78xx0_uart3_init(void)
+{
+	orion_uart3_init(UART3_VIRT_BASE, UART3_PHYS_BASE,
+			 IRQ_MV78XX0_UART_3, tclk);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+void __init mv78xx0_init_early(void)
+{
+	orion_time_set_base(TIMER_VIRT_BASE);
+	if (mv78xx0_core_index() == 0)
+		mvebu_mbus_init("marvell,mv78xx0-mbus",
+				BRIDGE_WINS_CPU0_BASE, BRIDGE_WINS_SZ,
+				DDR_WINDOW_CPU0_BASE, DDR_WINDOW_CPU_SZ);
+	else
+		mvebu_mbus_init("marvell,mv78xx0-mbus",
+				BRIDGE_WINS_CPU1_BASE, BRIDGE_WINS_SZ,
+				DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ);
+}
+
+void __ref mv78xx0_timer_init(void)
+{
+	orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
+			IRQ_MV78XX0_TIMER_1, get_tclk());
+}
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+static char * __init mv78xx0_id(void)
+{
+	u32 dev, rev;
+
+	mv78xx0_pcie_id(&dev, &rev);
+
+	if (dev == MV78X00_Z0_DEV_ID) {
+		if (rev == MV78X00_REV_Z0)
+			return "MV78X00-Z0";
+		else
+			return "MV78X00-Rev-Unsupported";
+	} else if (dev == MV78100_DEV_ID) {
+		if (rev == MV78100_REV_A0)
+			return "MV78100-A0";
+		else if (rev == MV78100_REV_A1)
+			return "MV78100-A1";
+		else
+			return "MV78100-Rev-Unsupported";
+	} else if (dev == MV78200_DEV_ID) {
+		if (rev == MV78100_REV_A0)
+			return "MV78200-A0";
+		else
+			return "MV78200-Rev-Unsupported";
+	} else {
+		return "Device-Unknown";
+	}
+}
+
+static int __init is_l2_writethrough(void)
+{
+	return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
+}
+
+void __init mv78xx0_init(void)
+{
+	int core_index;
+	int hclk;
+	int pclk;
+	int l2clk;
+
+	core_index = mv78xx0_core_index();
+	hclk = get_hclk();
+	get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
+
+	printk(KERN_INFO "%s ", mv78xx0_id());
+	printk("core #%d, ", core_index);
+	printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
+	printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
+	printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
+	printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
+
+	if (IS_ENABLED(CONFIG_CACHE_FEROCEON_L2))
+		feroceon_l2_init(is_l2_writethrough());
+
+	/* Setup root of clk tree */
+	clk_init();
+}
+
+void mv78xx0_restart(enum reboot_mode mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
new file mode 100644
index 000000000..6889af260
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-mv78xx0/common.h
+ *
+ * Core functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_MV78XX0_COMMON_H
+#define __ARCH_MV78XX0_COMMON_H
+
+#include <linux/reboot.h>
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+/*
+ * Basic MV78xx0 init functions used early by machine-setup.
+ */
+int mv78xx0_core_index(void);
+void mv78xx0_map_io(void);
+void mv78xx0_init(void);
+void mv78xx0_init_early(void);
+void mv78xx0_init_irq(void);
+
+void mv78xx0_setup_cpu_mbus(void);
+void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
+			       int maj, int min);
+void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
+				int maj, int min);
+
+void mv78xx0_pcie_id(u32 *dev, u32 *rev);
+
+void mv78xx0_ehci0_init(void);
+void mv78xx0_ehci1_init(void);
+void mv78xx0_ehci2_init(void);
+void mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data);
+void mv78xx0_pcie_init(int init_port0, int init_port1);
+void mv78xx0_sata_init(struct mv_sata_platform_data *sata_data);
+void mv78xx0_uart0_init(void);
+void mv78xx0_uart1_init(void);
+void mv78xx0_uart2_init(void);
+void mv78xx0_uart3_init(void);
+void mv78xx0_i2c_init(void);
+void mv78xx0_restart(enum reboot_mode, const char *);
+
+extern void mv78xx0_timer_init(void);
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
new file mode 100644
index 000000000..cf16e08d4
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -0,0 +1,104 @@
+/*
+ * arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+ *
+ * Marvell DB-78x00-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "mv78xx0.h"
+#include "common.h"
+
+static struct mv643xx_eth_platform_data db78x00_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge10_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(10),
+};
+
+static struct mv643xx_eth_platform_data db78x00_ge11_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct mv_sata_platform_data db78x00_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct i2c_board_info __initdata db78x00_i2c_rtc = {
+	I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+
+static void __init db78x00_init(void)
+{
+	/*
+	 * Basic MV78xx0 setup. Needs to be called early.
+	 */
+	mv78xx0_init();
+
+	/*
+	 * Partition on-chip peripherals between the two CPU cores.
+	 */
+	if (mv78xx0_core_index() == 0) {
+		mv78xx0_ehci0_init();
+		mv78xx0_ehci1_init();
+		mv78xx0_ehci2_init();
+		mv78xx0_ge00_init(&db78x00_ge00_data);
+		mv78xx0_ge01_init(&db78x00_ge01_data);
+		mv78xx0_ge10_init(&db78x00_ge10_data);
+		mv78xx0_ge11_init(&db78x00_ge11_data);
+		mv78xx0_sata_init(&db78x00_sata_data);
+		mv78xx0_uart0_init();
+		mv78xx0_uart2_init();
+		mv78xx0_i2c_init();
+		i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+	} else {
+		mv78xx0_uart1_init();
+		mv78xx0_uart3_init();
+	}
+}
+
+static int __init db78x00_pci_init(void)
+{
+	if (machine_is_db78x00_bp()) {
+		/*
+		 * Assign the x16 PCIe slot on the board to CPU core
+		 * #0, and let CPU core #1 have the four x1 slots.
+		 */
+		if (mv78xx0_core_index() == 0)
+			mv78xx0_pcie_init(0, 1);
+		else
+			mv78xx0_pcie_init(1, 0);
+	}
+
+	return 0;
+}
+subsys_initcall(db78x00_pci_init);
+
+MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
+	.init_machine	= db78x00_init,
+	.map_io		= mv78xx0_map_io,
+	.init_early	= mv78xx0_init_early,
+	.init_irq	= mv78xx0_init_irq,
+	.init_time	= mv78xx0_timer_init,
+	.restart	= mv78xx0_restart,
+MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
new file mode 100644
index 000000000..788569e96
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-mv78xx0/irq.c
+ *
+ * MV78xx0 IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/exception.h>
+#include <plat/orion-gpio.h>
+#include <plat/irq.h>
+#include "bridge-regs.h"
+#include "common.h"
+
+static int __initdata gpio0_irqs[4] = {
+	IRQ_MV78XX0_GPIO_0_7,
+	IRQ_MV78XX0_GPIO_8_15,
+	IRQ_MV78XX0_GPIO_16_23,
+	IRQ_MV78XX0_GPIO_24_31,
+};
+
+static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE;
+
+static asmlinkage void
+__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF);
+	if (stat) {
+		unsigned int hwirq = __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF);
+	if (stat) {
+		unsigned int hwirq = 32 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF);
+	if (stat) {
+		unsigned int hwirq = 64 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+}
+
+void __init mv78xx0_init_irq(void)
+{
+	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+	orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
+
+	set_handle_irq(mv78xx0_legacy_handle_irq);
+
+	/*
+	 * Initialize gpiolib for GPIOs 0-31.  (The GPIO interrupt mask
+	 * registers for core #1 are at an offset of 0x18 from those of
+	 * core #0.)
+	 */
+	orion_gpio_init(NULL, 0, 32, GPIO_VIRT_BASE,
+			mv78xx0_core_index() ? 0x18 : 0,
+			IRQ_MV78XX0_GPIO_START, gpio0_irqs);
+}
diff --git a/arch/arm/mach-mv78xx0/irqs.h b/arch/arm/mach-mv78xx0/irqs.h
new file mode 100644
index 000000000..67e0fe730
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/irqs.h
@@ -0,0 +1,92 @@
+/*
+ * IRQ definitions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * MV78xx0 Low Interrupt Controller
+ */
+#define IRQ_MV78XX0_ERR		0
+#define IRQ_MV78XX0_SPI		1
+#define IRQ_MV78XX0_I2C_0	2
+#define IRQ_MV78XX0_I2C_1	3
+#define IRQ_MV78XX0_IDMA_0	4
+#define IRQ_MV78XX0_IDMA_1	5
+#define IRQ_MV78XX0_IDMA_2	6
+#define IRQ_MV78XX0_IDMA_3	7
+#define IRQ_MV78XX0_TIMER_0	8
+#define IRQ_MV78XX0_TIMER_1	9
+#define IRQ_MV78XX0_TIMER_2	10
+#define IRQ_MV78XX0_TIMER_3	11
+#define IRQ_MV78XX0_UART_0	12
+#define IRQ_MV78XX0_UART_1	13
+#define IRQ_MV78XX0_UART_2	14
+#define IRQ_MV78XX0_UART_3	15
+#define IRQ_MV78XX0_USB_0	16
+#define IRQ_MV78XX0_USB_1	17
+#define IRQ_MV78XX0_USB_2	18
+#define IRQ_MV78XX0_CRYPTO	19
+#define IRQ_MV78XX0_SDIO_0	20
+#define IRQ_MV78XX0_SDIO_1	21
+#define IRQ_MV78XX0_XOR_0	22
+#define IRQ_MV78XX0_XOR_1	23
+#define IRQ_MV78XX0_I2S_0	24
+#define IRQ_MV78XX0_I2S_1	25
+#define IRQ_MV78XX0_SATA	26
+#define IRQ_MV78XX0_TDMI	27
+
+/*
+ * MV78xx0 High Interrupt Controller
+ */
+#define IRQ_MV78XX0_PCIE_00	32
+#define IRQ_MV78XX0_PCIE_01	33
+#define IRQ_MV78XX0_PCIE_02	34
+#define IRQ_MV78XX0_PCIE_03	35
+#define IRQ_MV78XX0_PCIE_10	36
+#define IRQ_MV78XX0_PCIE_11	37
+#define IRQ_MV78XX0_PCIE_12	38
+#define IRQ_MV78XX0_PCIE_13	39
+#define IRQ_MV78XX0_GE00_SUM	40
+#define IRQ_MV78XX0_GE00_RX	41
+#define IRQ_MV78XX0_GE00_TX	42
+#define IRQ_MV78XX0_GE00_MISC	43
+#define IRQ_MV78XX0_GE01_SUM	44
+#define IRQ_MV78XX0_GE01_RX	45
+#define IRQ_MV78XX0_GE01_TX	46
+#define IRQ_MV78XX0_GE01_MISC	47
+#define IRQ_MV78XX0_GE10_SUM	48
+#define IRQ_MV78XX0_GE10_RX	49
+#define IRQ_MV78XX0_GE10_TX	50
+#define IRQ_MV78XX0_GE10_MISC	51
+#define IRQ_MV78XX0_GE11_SUM	52
+#define IRQ_MV78XX0_GE11_RX	53
+#define IRQ_MV78XX0_GE11_TX	54
+#define IRQ_MV78XX0_GE11_MISC	55
+#define IRQ_MV78XX0_GPIO_0_7	56
+#define IRQ_MV78XX0_GPIO_8_15	57
+#define IRQ_MV78XX0_GPIO_16_23	58
+#define IRQ_MV78XX0_GPIO_24_31	59
+#define IRQ_MV78XX0_DB_IN	60
+#define IRQ_MV78XX0_DB_OUT	61
+
+/*
+ * MV78xx0 Error Interrupt Controller
+ */
+#define IRQ_MV78XX0_GE_ERR	70
+
+/*
+ * MV78XX0 General Purpose Pins
+ */
+#define IRQ_MV78XX0_GPIO_START	96
+#define NR_GPIO_IRQS		32
+
+#define MV78XX0_NR_IRQS		(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
new file mode 100644
index 000000000..72843c02e
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-mv78x00/mpp.c
+ *
+ * MPP functions for Marvell MV78x00 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <plat/mpp.h>
+#include "mv78xx0.h"
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int __init mv78xx0_variant(void)
+{
+	u32 dev, rev;
+
+	mv78xx0_pcie_id(&dev, &rev);
+
+	if (dev == MV78100_DEV_ID && rev >= MV78100_REV_A0)
+		return MPP_78100_A0_MASK;
+
+	printk(KERN_ERR "MPP setup: unknown mv78x00 variant "
+			"(dev %#x rev %#x)\n", dev, rev);
+	return 0;
+}
+
+void __init mv78xx0_mpp_conf(unsigned int *mpp_list)
+{
+	orion_mpp_conf(mpp_list, mv78xx0_variant(),
+		       MPP_MAX, DEV_BUS_VIRT_BASE);
+}
diff --git a/arch/arm/mach-mv78xx0/mpp.h b/arch/arm/mach-mv78xx0/mpp.h
new file mode 100644
index 000000000..3752302ae
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mpp.h
@@ -0,0 +1,341 @@
+/*
+ * linux/arch/arm/mach-mv78xx0/mpp.h -- Multi Purpose Pins
+ *
+ *
+ * sebastien requiem <sebastien@requiem.fr>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MV78X00_MPP_H
+#define __MV78X00_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _78100_A0) (\
+    /* MPP number */        ((_num) & 0xff) | \
+    /* MPP select value */        (((_sel) & 0xf) << 8) | \
+    /* may be input signal */    ((!!(_in)) << 12) | \
+    /* may be output signal */    ((!!(_out)) << 13) | \
+    /* available on A0 */    ((!!(_78100_A0)) << 14))
+
+                /*   num sel  i  o  78100_A0  */
+
+#define MPP_78100_A0_MASK    MPP(0, 0x0, 0, 0, 1)
+
+#define MPP0_GPIO        MPP(0, 0x0, 1, 1, 1)
+#define MPP0_GE0_COL        MPP(0, 0x1, 0, 0, 1)
+#define MPP0_GE1_TXCLK        MPP(0, 0x2, 0, 0, 1)
+#define MPP0_UNUSED        MPP(0, 0x3, 0, 0, 1)
+
+#define MPP1_GPIO        MPP(1, 0x0, 1, 1, 1)
+#define MPP1_GE0_RXERR        MPP(1, 0x1, 0, 0, 1)
+#define MPP1_GE1_TXCTL        MPP(1, 0x2, 0, 0, 1)
+#define MPP1_UNUSED        MPP(1, 0x3, 0, 0, 1)
+
+#define MPP2_GPIO        MPP(2, 0x0, 1, 1, 1)
+#define MPP2_GE0_CRS        MPP(2, 0x1, 0, 0, 1)
+#define MPP2_GE1_RXCTL        MPP(2, 0x2, 0, 0, 1)
+#define MPP2_UNUSED        MPP(2, 0x3, 0, 0, 1)
+
+#define MPP3_GPIO        MPP(3, 0x0, 1, 1, 1)
+#define MPP3_GE0_TXERR        MPP(3, 0x1, 0, 0, 1)
+#define MPP3_GE1_RXCLK        MPP(3, 0x2, 0, 0, 1)
+#define MPP3_UNUSED        MPP(3, 0x3, 0, 0, 1)
+
+#define MPP4_GPIO        MPP(4, 0x0, 1, 1, 1)
+#define MPP4_GE0_TXD4        MPP(4, 0x1, 0, 0, 1)
+#define MPP4_GE1_TXD0        MPP(4, 0x2, 0, 0, 1)
+#define MPP4_UNUSED        MPP(4, 0x3, 0, 0, 1)
+
+#define MPP5_GPIO        MPP(5, 0x0, 1, 1, 1)
+#define MPP5_GE0_TXD5        MPP(5, 0x1, 0, 0, 1)
+#define MPP5_GE1_TXD1        MPP(5, 0x2, 0, 0, 1)
+#define MPP5_UNUSED        MPP(5, 0x3, 0, 0, 1)
+
+#define MPP6_GPIO        MPP(6, 0x0, 1, 1, 1)
+#define MPP6_GE0_TXD6        MPP(6, 0x1, 0, 0, 1)
+#define MPP6_GE1_TXD2        MPP(6, 0x2, 0, 0, 1)
+#define MPP6_UNUSED        MPP(6, 0x3, 0, 0, 1)
+
+#define MPP7_GPIO        MPP(7, 0x0, 1, 1, 1)
+#define MPP7_GE0_TXD7        MPP(7, 0x1, 0, 0, 1)
+#define MPP7_GE1_TXD3        MPP(7, 0x2, 0, 0, 1)
+#define MPP7_UNUSED        MPP(7, 0x3, 0, 0, 1)
+
+#define MPP8_GPIO        MPP(8, 0x0, 1, 1, 1)
+#define MPP8_GE0_RXD4        MPP(8, 0x1, 0, 0, 1)
+#define MPP8_GE1_RXD0        MPP(8, 0x2, 0, 0, 1)
+#define MPP8_UNUSED        MPP(8, 0x3, 0, 0, 1)
+
+#define MPP9_GPIO        MPP(9, 0x0, 1, 1, 1)
+#define MPP9_GE0_RXD5        MPP(9, 0x1, 0, 0, 1)
+#define MPP9_GE1_RXD1        MPP(9, 0x2, 0, 0, 1)
+#define MPP9_UNUSED        MPP(9, 0x3, 0, 0, 1)
+
+#define MPP10_GPIO        MPP(10, 0x0, 1, 1, 1)
+#define MPP10_GE0_RXD6        MPP(10, 0x1, 0, 0, 1)
+#define MPP10_GE1_RXD2        MPP(10, 0x2, 0, 0, 1)
+#define MPP10_UNUSED        MPP(10, 0x3, 0, 0, 1)
+
+#define MPP11_GPIO        MPP(11, 0x0, 1, 1, 1)
+#define MPP11_GE0_RXD7        MPP(11, 0x1, 0, 0, 1)
+#define MPP11_GE1_RXD3        MPP(11, 0x2, 0, 0, 1)
+#define MPP11_UNUSED        MPP(11, 0x3, 0, 0, 1)
+
+#define MPP12_GPIO        MPP(12, 0x0, 1, 1, 1)
+#define MPP12_M_BB        MPP(12, 0x3, 0, 0, 1)
+#define MPP12_UA0_CTSn        MPP(12, 0x4, 0, 0, 1)
+#define MPP12_NAND_FLASH_REn0    MPP(12, 0x5, 0, 0, 1)
+#define MPP12_TDM0_SCSn        MPP(12, 0X6, 0, 0, 1)
+#define MPP12_UNUSED        MPP(12, 0x1, 0, 0, 1)
+
+#define MPP13_GPIO        MPP(13, 0x0, 1, 1, 1)
+#define MPP13_SYSRST_OUTn    MPP(13, 0x3, 0, 0, 1)
+#define MPP13_UA0_RTSn        MPP(13, 0x4, 0, 0, 1)
+#define MPP13_NAN_FLASH_WEn0    MPP(13, 0x5, 0, 0, 1)
+#define MPP13_TDM_SCLK        MPP(13, 0x6, 0, 0, 1)
+#define MPP13_UNUSED        MPP(13, 0x1, 0, 0, 1)
+
+#define MPP14_GPIO        MPP(14, 0x0, 1, 1, 1)
+#define MPP14_SATA1_ACTn    MPP(14, 0x3, 0, 0, 1)
+#define MPP14_UA1_CTSn        MPP(14, 0x4, 0, 0, 1)
+#define MPP14_NAND_FLASH_REn1    MPP(14, 0x5, 0, 0, 1)
+#define MPP14_TDM_SMOSI        MPP(14, 0x6, 0, 0, 1)
+#define MPP14_UNUSED        MPP(14, 0x1, 0, 0, 1)
+
+#define MPP15_GPIO        MPP(15, 0x0, 1, 1, 1)
+#define MPP15_SATA0_ACTn    MPP(15, 0x3, 0, 0, 1)
+#define MPP15_UA1_RTSn        MPP(15, 0x4, 0, 0, 1)
+#define MPP15_NAND_FLASH_WEn1    MPP(15, 0x5, 0, 0, 1)
+#define MPP15_TDM_SMISO        MPP(15, 0x6, 0, 0, 1)
+#define MPP15_UNUSED        MPP(15, 0x1, 0, 0, 1)
+
+#define MPP16_GPIO        MPP(16, 0x0, 1, 1, 1)
+#define MPP16_SATA1_PRESENTn    MPP(16, 0x3, 0, 0, 1)
+#define MPP16_UA2_TXD        MPP(16, 0x4, 0, 0, 1)
+#define MPP16_NAND_FLASH_REn3    MPP(16, 0x5, 0, 0, 1)
+#define MPP16_TDM_INTn        MPP(16, 0x6, 0, 0, 1)
+#define MPP16_UNUSED        MPP(16, 0x1, 0, 0, 1)
+
+
+#define MPP17_GPIO        MPP(17, 0x0, 1, 1, 1)
+#define MPP17_SATA0_PRESENTn    MPP(17, 0x3, 0, 0, 1)
+#define MPP17_UA2_RXD        MPP(17, 0x4, 0, 0, 1)
+#define MPP17_NAND_FLASH_WEn3    MPP(17, 0x5, 0, 0, 1)
+#define MPP17_TDM_RSTn        MPP(17, 0x6, 0, 0, 1)
+#define MPP17_UNUSED        MPP(17, 0x1, 0, 0, 1)
+
+
+#define MPP18_GPIO        MPP(18, 0x0, 1, 1, 1)
+#define MPP18_UA0_CTSn        MPP(18, 0x4, 0, 0, 1)
+#define MPP18_BOOT_FLASH_REn    MPP(18, 0x5, 0, 0, 1)
+#define MPP18_UNUSED        MPP(18, 0x1, 0, 0, 1)
+
+
+
+#define MPP19_GPIO        MPP(19, 0x0, 1, 1, 1)
+#define MPP19_UA0_CTSn        MPP(19, 0x4, 0, 0, 1)
+#define MPP19_BOOT_FLASH_WEn    MPP(19, 0x5, 0, 0, 1)
+#define MPP19_UNUSED        MPP(19, 0x1, 0, 0, 1)
+
+
+#define MPP20_GPIO        MPP(20, 0x0, 1, 1, 1)
+#define MPP20_UA1_CTSs        MPP(20, 0x4, 0, 0, 1)
+#define MPP20_TDM_PCLK        MPP(20, 0x6, 0, 0, 0)
+#define MPP20_UNUSED        MPP(20, 0x1, 0, 0, 1)
+
+
+
+#define MPP21_GPIO        MPP(21, 0x0, 1, 1, 1)
+#define MPP21_UA1_CTSs        MPP(21, 0x4, 0, 0, 1)
+#define MPP21_TDM_FSYNC        MPP(21, 0x6, 0, 0, 0)
+#define MPP21_UNUSED        MPP(21, 0x1, 0, 0, 1)
+
+
+
+#define MPP22_GPIO        MPP(22, 0x0, 1, 1, 1)
+#define MPP22_UA3_TDX        MPP(22, 0x4, 0, 0, 1)
+#define MPP22_NAND_FLASH_REn2    MPP(22, 0x5, 0, 0, 1)
+#define MPP22_TDM_DRX        MPP(22, 0x6, 0, 0, 1)
+#define MPP22_UNUSED        MPP(22, 0x1, 0, 0, 1)
+
+
+
+#define MPP23_GPIO        MPP(23, 0x0, 1, 1, 1)
+#define MPP23_UA3_RDX        MPP(23, 0x4, 0, 0, 1)
+#define MPP23_NAND_FLASH_WEn2    MPP(23, 0x5, 0, 0, 1)
+#define MPP23_TDM_DTX        MPP(23, 0x6, 0, 0, 1)
+#define MPP23_UNUSED        MPP(23, 0x1, 0, 0, 1)
+
+
+#define MPP24_GPIO        MPP(24, 0x0, 1, 1, 1)
+#define MPP24_UA2_TXD        MPP(24, 0x4, 0, 0, 1)
+#define MPP24_TDM_INTn        MPP(24, 0x6, 0, 0, 1)
+#define MPP24_UNUSED        MPP(24, 0x1, 0, 0, 1)
+
+
+#define MPP25_GPIO        MPP(25, 0x0, 1, 1, 1)
+#define MPP25_UA2_RXD        MPP(25, 0x4, 0, 0, 1)
+#define MPP25_TDM_RSTn        MPP(25, 0x6, 0, 0, 1)
+#define MPP25_UNUSED        MPP(25, 0x1, 0, 0, 1)
+
+
+#define MPP26_GPIO        MPP(26, 0x0, 1, 1, 1)
+#define MPP26_UA2_CTSn        MPP(26, 0x4, 0, 0, 1)
+#define MPP26_TDM_PCLK        MPP(26, 0x6, 0, 0, 1)
+#define MPP26_UNUSED        MPP(26, 0x1, 0, 0, 1)
+
+
+#define MPP27_GPIO        MPP(27, 0x0, 1, 1, 1)
+#define MPP27_UA2_RTSn        MPP(27, 0x4, 0, 0, 1)
+#define MPP27_TDM_FSYNC        MPP(27, 0x6, 0, 0, 1)
+#define MPP27_UNUSED        MPP(27, 0x1, 0, 0, 1)
+
+
+#define MPP28_GPIO        MPP(28, 0x0, 1, 1, 1)
+#define MPP28_UA3_TXD        MPP(28, 0x4, 0, 0, 1)
+#define MPP28_TDM_DRX        MPP(28, 0x6, 0, 0, 1)
+#define MPP28_UNUSED        MPP(28, 0x1, 0, 0, 1)
+
+#define MPP29_GPIO        MPP(29, 0x0, 1, 1, 1)
+#define MPP29_UA3_RXD        MPP(29, 0x4, 0, 0, 1)
+#define MPP29_SYSRST_OUTn    MPP(29, 0x5, 0, 0, 1)
+#define MPP29_TDM_DTX        MPP(29, 0x6, 0, 0, 1)
+#define MPP29_UNUSED        MPP(29, 0x1, 0, 0, 1)
+
+#define MPP30_GPIO        MPP(30, 0x0, 1, 1, 1)
+#define MPP30_UA3_CTSn        MPP(30, 0x4, 0, 0, 1)
+#define MPP30_UNUSED        MPP(30, 0x1, 0, 0, 1)
+
+#define MPP31_GPIO        MPP(31, 0x0, 1, 1, 1)
+#define MPP31_UA3_RTSn        MPP(31, 0x4, 0, 0, 1)
+#define MPP31_TDM1_SCSn        MPP(31, 0x6, 0, 0, 1)
+#define MPP31_UNUSED        MPP(31, 0x1, 0, 0, 1)
+
+
+#define MPP32_GPIO        MPP(32, 0x1, 1, 1, 1)
+#define MPP32_UA3_TDX        MPP(32, 0x4, 0, 0, 1)
+#define MPP32_SYSRST_OUTn    MPP(32, 0x5, 0, 0, 1)
+#define MPP32_TDM0_RXQ        MPP(32, 0x6, 0, 0, 1)
+#define MPP32_UNUSED        MPP(32, 0x3, 0, 0, 1)
+
+
+#define MPP33_GPIO        MPP(33, 0x1, 1, 1, 1)
+#define MPP33_UA3_RDX        MPP(33, 0x4, 0, 0, 1)
+#define MPP33_TDM0_TXQ        MPP(33, 0x6, 0, 0, 1)
+#define MPP33_UNUSED        MPP(33, 0x3, 0, 0, 1)
+
+
+
+#define MPP34_GPIO        MPP(34, 0x1, 1, 1, 1)
+#define MPP34_UA2_TDX        MPP(34, 0x4, 0, 0, 1)
+#define MPP34_TDM1_RXQ        MPP(34, 0x6, 0, 0, 1)
+#define MPP34_UNUSED        MPP(34, 0x3, 0, 0, 1)
+
+
+
+#define MPP35_GPIO        MPP(35, 0x1, 1, 1, 1)
+#define MPP35_UA2_RDX        MPP(35, 0x4, 0, 0, 1)
+#define MPP35_TDM1_TXQ        MPP(35, 0x6, 0, 0, 1)
+#define MPP35_UNUSED        MPP(35, 0x3, 0, 0, 1)
+
+#define MPP36_GPIO        MPP(36, 0x1, 1, 1, 1)
+#define MPP36_UA0_CTSn        MPP(36, 0x2, 0, 0, 1)
+#define MPP36_UA2_TDX        MPP(36, 0x4, 0, 0, 1)
+#define MPP36_TDM0_SCSn        MPP(36, 0x6, 0, 0, 1)
+#define MPP36_UNUSED        MPP(36, 0x3, 0, 0, 1)
+
+
+#define MPP37_GPIO        MPP(37, 0x1, 1, 1, 1)
+#define MPP37_UA0_RTSn        MPP(37, 0x2, 0, 0, 1)
+#define MPP37_UA2_RXD        MPP(37, 0x4, 0, 0, 1)
+#define MPP37_SYSRST_OUTn    MPP(37, 0x5, 0, 0, 1)
+#define MPP37_TDM_SCLK        MPP(37, 0x6, 0, 0, 1)
+#define MPP37_UNUSED        MPP(37, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP38_GPIO        MPP(38, 0x1, 1, 1, 1)
+#define MPP38_UA1_CTSn        MPP(38, 0x2, 0, 0, 1)
+#define MPP38_UA3_TXD        MPP(38, 0x4, 0, 0, 1)
+#define MPP38_SYSRST_OUTn    MPP(38, 0x5, 0, 0, 1)
+#define MPP38_TDM_SMOSI        MPP(38, 0x6, 0, 0, 1)
+#define MPP38_UNUSED        MPP(38, 0x3, 0, 0, 1)
+
+
+
+
+#define MPP39_GPIO        MPP(39, 0x1, 1, 1, 1)
+#define MPP39_UA1_RTSn        MPP(39, 0x2, 0, 0, 1)
+#define MPP39_UA3_RXD        MPP(39, 0x4, 0, 0, 1)
+#define MPP39_SYSRST_OUTn    MPP(39, 0x5, 0, 0, 1)
+#define MPP39_TDM_SMISO        MPP(39, 0x6, 0, 0, 1)
+#define MPP39_UNUSED        MPP(39, 0x3, 0, 0, 1)
+
+
+
+#define MPP40_GPIO        MPP(40, 0x1, 1, 1, 1)
+#define MPP40_TDM_INTn        MPP(40, 0x6, 0, 0, 1)
+#define MPP40_UNUSED        MPP(40, 0x0, 0, 0, 1)
+
+
+
+#define MPP41_GPIO        MPP(41, 0x1, 1, 1, 1)
+#define MPP41_TDM_RSTn        MPP(41, 0x6, 0, 0, 1)
+#define MPP41_UNUSED        MPP(41, 0x0, 0, 0, 1)
+
+
+
+#define MPP42_GPIO        MPP(42, 0x1, 1, 1, 1)
+#define MPP42_TDM_PCLK        MPP(42, 0x6, 0, 0, 1)
+#define MPP42_UNUSED        MPP(42, 0x0, 0, 0, 1)
+
+
+
+#define MPP43_GPIO        MPP(43, 0x1, 1, 1, 1)
+#define MPP43_TDM_FSYNC        MPP(43, 0x6, 0, 0, 1)
+#define MPP43_UNUSED        MPP(43, 0x0, 0, 0, 1)
+
+
+
+#define MPP44_GPIO        MPP(44, 0x1, 1, 1, 1)
+#define MPP44_TDM_DRX        MPP(44, 0x6, 0, 0, 1)
+#define MPP44_UNUSED        MPP(44, 0x0, 0, 0, 1)
+
+
+
+#define MPP45_GPIO        MPP(45, 0x1, 1, 1, 1)
+#define MPP45_SATA0_ACTn    MPP(45, 0x3, 0, 0, 1)
+#define MPP45_TDM_DRX        MPP(45, 0x6, 0, 0, 1)
+#define MPP45_UNUSED        MPP(45, 0x0, 0, 0, 1)
+
+
+#define MPP46_GPIO        MPP(46, 0x1, 1, 1, 1)
+#define MPP46_TDM_SCSn        MPP(46, 0x6, 0, 0, 1)
+#define MPP46_UNUSED        MPP(46, 0x0, 0, 0, 1)
+
+
+#define MPP47_GPIO        MPP(47, 0x1, 1, 1, 1)
+#define MPP47_UNUSED        MPP(47, 0x0, 0, 0, 1)
+
+
+
+#define MPP48_GPIO        MPP(48, 0x1, 1, 1, 1)
+#define MPP48_SATA1_ACTn    MPP(48, 0x3, 0, 0, 1)
+#define MPP48_UNUSED        MPP(48, 0x2, 0, 0, 1)
+
+
+
+#define MPP49_GPIO        MPP(49, 0x1, 1, 1, 1)
+#define MPP49_SATA0_ACTn    MPP(49, 0x3, 0, 0, 1)
+#define MPP49_M_BB        MPP(49, 0x4, 0, 0, 1)
+#define MPP49_UNUSED        MPP(49, 0x2, 0, 0, 1)
+
+
+#define MPP_MAX            49
+
+void mv78xx0_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h
new file mode 100644
index 000000000..c1a9a1d1b
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/mv78xx0.h
@@ -0,0 +1,127 @@
+/*
+ * Generic definitions for Marvell MV78xx0 SoC flavors:
+ *  MV781x0 and MV782x0.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MV78XX0_H
+#define __ASM_ARCH_MV78XX0_H
+
+#include "irqs.h"
+
+/*
+ * Marvell MV78xx0 address maps.
+ *
+ * phys
+ * c0000000	PCIe Memory space
+ * f0800000	PCIe #0 I/O space
+ * f0900000	PCIe #1 I/O space
+ * f0a00000	PCIe #2 I/O space
+ * f0b00000	PCIe #3 I/O space
+ * f0c00000	PCIe #4 I/O space
+ * f0d00000	PCIe #5 I/O space
+ * f0e00000	PCIe #6 I/O space
+ * f0f00000	PCIe #7 I/O space
+ * f1000000	on-chip peripheral registers
+ *
+ * virt		phys		size
+ * fe400000	f102x000	16K	core-specific peripheral registers
+ * fee00000	f0800000	64K	PCIe #0 I/O space
+ * fee10000	f0900000	64K	PCIe #1 I/O space
+ * fee20000	f0a00000	64K	PCIe #2 I/O space
+ * fee30000	f0b00000	64K	PCIe #3 I/O space
+ * fee40000	f0c00000	64K	PCIe #4 I/O space
+ * fee50000	f0d00000	64K	PCIe #5 I/O space
+ * fee60000	f0e00000	64K	PCIe #6 I/O space
+ * fee70000	f0f00000	64K	PCIe #7 I/O space
+ * fec00000	f1000000	1M	on-chip peripheral registers
+ */
+#define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
+#define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
+#define MV78XX0_CORE_REGS_VIRT_BASE	IOMEM(0xfe400000)
+#define MV78XX0_CORE_REGS_PHYS_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_SIZE		SZ_16K
+
+#define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_SIZE		SZ_1M
+
+#define MV78XX0_REGS_PHYS_BASE		0xf1000000
+#define MV78XX0_REGS_VIRT_BASE		IOMEM(0xfec00000)
+#define MV78XX0_REGS_SIZE		SZ_1M
+
+#define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
+#define MV78XX0_PCIE_MEM_SIZE		0x30000000
+
+/*
+ * Core-specific peripheral registers.
+ */
+#define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
+#define BRIDGE_PHYS_BASE	(MV78XX0_CORE_REGS_PHYS_BASE)
+#define  BRIDGE_WINS_CPU0_BASE  (MV78XX0_CORE0_REGS_PHYS_BASE)
+#define  BRIDGE_WINS_CPU1_BASE  (MV78XX0_CORE1_REGS_PHYS_BASE)
+#define  BRIDGE_WINS_SZ         (0xA000)
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE + 0x00000)
+#define DDR_PHYS_BASE           (MV78XX0_REGS_PHYS_BASE + 0x00000)
+#define  DDR_WINDOW_CPU0_BASE	(DDR_PHYS_BASE + 0x1500)
+#define  DDR_WINDOW_CPU1_BASE	(DDR_PHYS_BASE + 0x1570)
+#define  DDR_WINDOW_CPU_SZ      (0x20)
+
+#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE + 0x10000)
+#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x10000)
+#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE + 0x0030)
+#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE + 0x0034)
+#define  GPIO_VIRT_BASE		(DEV_BUS_VIRT_BASE + 0x0100)
+#define  I2C_0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x1000)
+#define  I2C_1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x1100)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2100)
+#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2200)
+#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2200)
+#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE + 0x2300)
+#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE + 0x2300)
+
+#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x30000)
+#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x34000)
+
+#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x40000)
+#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x44000)
+#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x48000)
+#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x4c000)
+
+#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x50000)
+#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x51000)
+#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x52000)
+
+#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x70000)
+#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x74000)
+
+#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x80000)
+#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x84000)
+#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x88000)
+#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x8c000)
+
+#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0xa0000)
+
+/*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID	0x6381
+#define MV78X00_REV_Z0		1
+
+#define MV78100_DEV_ID		0x7810
+#define MV78100_REV_A0		1
+#define MV78100_REV_A1		2
+
+#define MV78200_DEV_ID		0x7820
+#define MV78200_REV_A0		1
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
new file mode 100644
index 000000000..636d84b40
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-mv78xx0/pcie.c
+ *
+ * PCIe functions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <video/vga.h>
+#include <asm/irq.h>
+#include <asm/mach/pci.h>
+#include <plat/pcie.h>
+#include "mv78xx0.h"
+#include "common.h"
+
+#define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4)
+#define MV78XX0_MBUS_PCIE_MEM_ATTR(port, lane)   (0xf8 & ~(0x10 << (lane)))
+#define MV78XX0_MBUS_PCIE_IO_TARGET(port, lane)  ((port) ? 8 : 4)
+#define MV78XX0_MBUS_PCIE_IO_ATTR(port, lane)    (0xf0 & ~(0x10 << (lane)))
+
+struct pcie_port {
+	u8			maj;
+	u8			min;
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	char			mem_space_name[20];
+	struct resource		res;
+};
+
+static struct pcie_port pcie_port[8];
+static int num_pcie_ports;
+static struct resource pcie_io_space;
+
+void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
+{
+	*dev = orion_pcie_dev_id(PCIE00_VIRT_BASE);
+	*rev = orion_pcie_rev(PCIE00_VIRT_BASE);
+}
+
+u32 pcie_port_size[8] = {
+	0,
+	0x30000000,
+	0x10000000,
+	0x10000000,
+	0x08000000,
+	0x08000000,
+	0x08000000,
+	0x04000000,
+};
+
+static void __init mv78xx0_pcie_preinit(void)
+{
+	int i;
+	u32 size_each;
+	u32 start;
+
+	pcie_io_space.name = "PCIe I/O Space";
+	pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
+	pcie_io_space.end =
+		MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
+	pcie_io_space.flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pcie_io_space))
+		panic("can't allocate PCIe I/O space");
+
+	if (num_pcie_ports > 7)
+		panic("invalid number of PCIe ports");
+
+	size_each = pcie_port_size[num_pcie_ports];
+
+	start = MV78XX0_PCIE_MEM_PHYS_BASE;
+	for (i = 0; i < num_pcie_ports; i++) {
+		struct pcie_port *pp = pcie_port + i;
+
+		snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+			"PCIe %d.%d MEM", pp->maj, pp->min);
+		pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+		pp->res.name = pp->mem_space_name;
+		pp->res.flags = IORESOURCE_MEM;
+		pp->res.start = start;
+		pp->res.end = start + size_each - 1;
+		start += size_each;
+
+		if (request_resource(&iomem_resource, &pp->res))
+			panic("can't allocate PCIe MEM sub-space");
+
+		mvebu_mbus_add_window_by_id(MV78XX0_MBUS_PCIE_MEM_TARGET(pp->maj, pp->min),
+					    MV78XX0_MBUS_PCIE_MEM_ATTR(pp->maj, pp->min),
+					    pp->res.start, resource_size(&pp->res));
+		mvebu_mbus_add_window_remap_by_id(MV78XX0_MBUS_PCIE_IO_TARGET(pp->maj, pp->min),
+						  MV78XX0_MBUS_PCIE_IO_ATTR(pp->maj, pp->min),
+						  i * SZ_64K, SZ_64K, 0);
+	}
+}
+
+static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct pcie_port *pp;
+
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	pp = &pcie_port[nr];
+	sys->private_data = pp;
+	pp->root_bus_nr = sys->busnr;
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+	orion_pcie_setup(pp->base);
+
+	pci_ioremap_io(nr * SZ_64K, MV78XX0_PCIE_IO_PHYS_BASE(nr));
+
+	pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset);
+
+	return 1;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access nonexisting devices
+	 * on the local bus.
+	 */
+	if (bus == pp->root_bus_nr && dev > 1)
+		return 0;
+
+	return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	struct pci_sys_data *sys = bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+static void rc_pci_fixup(struct pci_dev *dev)
+{
+	/*
+	 * Prevent enumeration of root complex.
+	 */
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static int __init mv78xx0_pcie_scan_bus(int nr, struct pci_host_bridge *bridge)
+{
+	struct pci_sys_data *sys = pci_host_bridge_priv(bridge);
+
+	if (nr >= num_pcie_ports) {
+		BUG();
+		return -EINVAL;
+	}
+
+	list_splice_init(&sys->resources, &bridge->windows);
+	bridge->dev.parent = NULL;
+	bridge->sysdata = sys;
+	bridge->busnr = sys->busnr;
+	bridge->ops = &pcie_ops;
+
+	return pci_scan_root_bus_bridge(bridge);
+}
+
+static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	struct pci_sys_data *sys = dev->bus->sysdata;
+	struct pcie_port *pp = sys->private_data;
+
+	return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min;
+}
+
+static struct hw_pci mv78xx0_pci __initdata = {
+	.nr_controllers	= 8,
+	.preinit	= mv78xx0_pcie_preinit,
+	.setup		= mv78xx0_pcie_setup,
+	.scan		= mv78xx0_pcie_scan_bus,
+	.map_irq	= mv78xx0_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int maj, int min, void __iomem *base)
+{
+	printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
+
+	if (orion_pcie_link_up(base)) {
+		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+		printk("link up\n");
+
+		pp->maj = maj;
+		pp->min = min;
+		pp->root_bus_nr = -1;
+		pp->base = base;
+		spin_lock_init(&pp->conf_lock);
+		memset(&pp->res, 0, sizeof(pp->res));
+	} else {
+		printk("link down, ignoring\n");
+	}
+}
+
+void __init mv78xx0_pcie_init(int init_port0, int init_port1)
+{
+	vga_base = MV78XX0_PCIE_MEM_PHYS_BASE;
+
+	if (init_port0) {
+		add_pcie_port(0, 0, PCIE00_VIRT_BASE);
+		if (!orion_pcie_x4_mode(PCIE00_VIRT_BASE)) {
+			add_pcie_port(0, 1, PCIE01_VIRT_BASE);
+			add_pcie_port(0, 2, PCIE02_VIRT_BASE);
+			add_pcie_port(0, 3, PCIE03_VIRT_BASE);
+		}
+	}
+
+	if (init_port1) {
+		add_pcie_port(1, 0, PCIE10_VIRT_BASE);
+		if (!orion_pcie_x4_mode((void __iomem *)PCIE10_VIRT_BASE)) {
+			add_pcie_port(1, 1, PCIE11_VIRT_BASE);
+			add_pcie_port(1, 2, PCIE12_VIRT_BASE);
+			add_pcie_port(1, 3, PCIE13_VIRT_BASE);
+		}
+	}
+
+	pci_common_init(&mv78xx0_pci);
+}
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
new file mode 100644
index 000000000..308ab71ec
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-mv78x00/rd78x00-masa-setup.c
+ *
+ * Marvell RD-78x00-mASA Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "mv78xx0.h"
+#include "common.h"
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(9),
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge10_data = {
+};
+
+static struct mv643xx_eth_platform_data rd78x00_masa_ge11_data = {
+};
+
+static struct mv_sata_platform_data rd78x00_masa_sata_data = {
+	.n_ports	= 2,
+};
+
+static void __init rd78x00_masa_init(void)
+{
+	/*
+	 * Basic MV78x00 setup. Needs to be called early.
+	 */
+	mv78xx0_init();
+
+	/*
+	 * Partition on-chip peripherals between the two CPU cores.
+	 */
+	if (mv78xx0_core_index() == 0) {
+		mv78xx0_ehci0_init();
+		mv78xx0_ehci1_init();
+		mv78xx0_ge00_init(&rd78x00_masa_ge00_data);
+		mv78xx0_ge10_init(&rd78x00_masa_ge10_data);
+		mv78xx0_sata_init(&rd78x00_masa_sata_data);
+		mv78xx0_uart0_init();
+		mv78xx0_uart2_init();
+	} else {
+		mv78xx0_ehci2_init();
+		mv78xx0_ge01_init(&rd78x00_masa_ge01_data);
+		mv78xx0_ge11_init(&rd78x00_masa_ge11_data);
+		mv78xx0_uart1_init();
+		mv78xx0_uart3_init();
+	}
+}
+
+static int __init rd78x00_pci_init(void)
+{
+	/*
+	 * Assign all PCIe devices to CPU core #0.
+	 */
+	if (machine_is_rd78x00_masa() && mv78xx0_core_index() == 0)
+		mv78xx0_pcie_init(1, 1);
+
+	return 0;
+}
+subsys_initcall(rd78x00_pci_init);
+
+MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
+	.init_machine	= rd78x00_masa_init,
+	.map_io		= mv78xx0_map_io,
+	.init_early	= mv78xx0_init_early,
+	.init_irq	= mv78xx0_init_irq,
+	.init_time	= mv78xx0_timer_init,
+	.restart	= mv78xx0_restart,
+MACHINE_END