Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 193 insertions, 0 deletions

diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
new file mode 100644
index 000000000..ceaad6d59
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-mvebu/kirkwood.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include "kirkwood.h"
+#include "kirkwood-pm.h"
+#include "common.h"
+
+static struct resource kirkwood_cpufreq_resources[] = {
+	[0] = {
+		.start  = CPU_CONTROL_PHYS,
+		.end    = CPU_CONTROL_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+	.name		= "kirkwood-cpufreq",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_cpufreq_resources),
+	.resource	= kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+	platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= DDR_OPERATION_BASE,
+		.end	= DDR_OPERATION_BASE + 3,
+	},
+};
+
+static struct platform_device kirkwood_cpuidle = {
+	.name		= "kirkwood_cpuidle",
+	.id		= -1,
+	.resource	= kirkwood_cpuidle_resource,
+	.num_resources	= 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+	platform_device_register(&kirkwood_cpuidle);
+}
+
+#define MV643XX_ETH_MAC_ADDR_LOW	0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
+{
+	struct device_node *np;
+
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by u-boot
+	 * if the clocks are turned off. Usually, u-boot on kirkwood boards
+	 * has no DT support to properly set local-mac-address property.
+	 * As a workaround, we get the MAC address from mv643xx_eth registers
+	 * and update the port device node if no valid MAC address is set.
+	 */
+	for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+		struct device_node *pnp = of_get_parent(np);
+		struct clk *clk;
+		struct property *pmac;
+		void __iomem *io;
+		u8 *macaddr;
+		u32 reg;
+
+		if (!pnp)
+			continue;
+
+		/* skip disabled nodes or nodes with valid MAC address*/
+		if (!of_device_is_available(pnp) ||
+		    !IS_ERR(of_get_mac_address(np)))
+			goto eth_fixup_skip;
+
+		clk = of_clk_get(pnp, 0);
+		if (IS_ERR(clk))
+			goto eth_fixup_skip;
+
+		io = of_iomap(pnp, 0);
+		if (!io)
+			goto eth_fixup_no_map;
+
+		/* ensure port clock is not gated to not hang CPU */
+		clk_prepare_enable(clk);
+
+		/* store MAC address register contents in local-mac-address */
+		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+		if (!pmac)
+			goto eth_fixup_no_mem;
+
+		pmac->value = pmac + 1;
+		pmac->length = 6;
+		pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+		if (!pmac->name) {
+			kfree(pmac);
+			goto eth_fixup_no_mem;
+		}
+
+		macaddr = pmac->value;
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+		macaddr[0] = (reg >> 24) & 0xff;
+		macaddr[1] = (reg >> 16) & 0xff;
+		macaddr[2] = (reg >> 8) & 0xff;
+		macaddr[3] = reg & 0xff;
+
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+		macaddr[4] = (reg >> 8) & 0xff;
+		macaddr[5] = reg & 0xff;
+
+		of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+		iounmap(io);
+		clk_disable_unprepare(clk);
+eth_fixup_no_map:
+		clk_put(clk);
+eth_fixup_skip:
+		of_node_put(pnp);
+	}
+}
+
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+static void kirkwood_disable_mbus_error_propagation(void)
+{
+	void __iomem *cpu_config;
+
+	cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+	writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+}
+
+static struct of_dev_auxdata auxdata[] __initdata = {
+	OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
+		       "mvebu-audio", NULL),
+	{ /* sentinel */ }
+};
+
+static void __init kirkwood_dt_init(void)
+{
+	kirkwood_disable_mbus_error_propagation();
+
+	BUG_ON(mvebu_mbus_dt_init(false));
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+	feroceon_of_init();
+#endif
+	kirkwood_cpufreq_init();
+	kirkwood_cpuidle_init();
+
+	kirkwood_pm_init();
+	kirkwood_dt_eth_fixup();
+
+	of_platform_default_populate(NULL, auxdata, NULL);
+}
+
+static const char * const kirkwood_dt_board_compat[] __initconst = {
+	"marvell,kirkwood",
+	NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+	.init_machine	= kirkwood_dt_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= kirkwood_dt_board_compat,
+MACHINE_END