Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

26 files changed, 3331 insertions, 0 deletions

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
new file mode 100644
index 000000000..34dbeaab9
--- /dev/null
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_MVEBU
+	bool "Marvell Engineering Business Unit (MVEBU) SoCs"
+	depends on ARCH_MULTI_V7 || ARCH_MULTI_V5
+	select ARCH_SUPPORTS_BIG_ENDIAN
+	select CLKSRC_MMIO
+	select PINCTRL
+	select PLAT_ORION
+	select SOC_BUS
+	select MVEBU_MBUS
+	select ZONE_DMA if ARM_LPAE
+	select GPIOLIB
+	select PCI_QUIRKS if PCI
+
+if ARCH_MVEBU
+
+config MACH_MVEBU_ANY
+	bool
+
+config MACH_MVEBU_V7
+	bool
+	select ARMADA_370_XP_TIMER
+	select CACHE_L2X0
+	select ARM_CPU_SUSPEND
+	select MACH_MVEBU_ANY
+	select MVEBU_CLK_COREDIV
+
+config MACH_ARMADA_370
+	bool "Marvell Armada 370 boards"
+	depends on ARCH_MULTI_V7
+	select ARMADA_370_CLK
+	select ARMADA_370_XP_IRQ
+	select CPU_PJ4B
+	select MACH_MVEBU_V7
+	select PINCTRL_ARMADA_370
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada 370 SoC with device tree.
+
+config MACH_ARMADA_375
+	bool "Marvell Armada 375 boards"
+	depends on ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
+	select ARM_ERRATA_720789
+	select PL310_ERRATA_753970
+	select ARM_GIC
+	select ARMADA_375_CLK
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select MACH_MVEBU_V7
+	select PINCTRL_ARMADA_375
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada 375 SoC with device tree.
+
+config MACH_ARMADA_38X
+	bool "Marvell Armada 380/385 boards"
+	depends on ARCH_MULTI_V7
+	select ARM_ERRATA_720789
+	select PL310_ERRATA_753970
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+	select ARMADA_370_XP_IRQ
+	select ARMADA_38X_CLK
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select MACH_MVEBU_V7
+	select PINCTRL_ARMADA_38X
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada 380/385 SoC with device tree.
+
+config MACH_ARMADA_39X
+	bool "Marvell Armada 39x boards"
+	depends on ARCH_MULTI_V7
+	select ARM_GIC
+	select ARMADA_370_XP_IRQ
+	select ARMADA_39X_CLK
+	select CACHE_L2X0
+	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
+	select MACH_MVEBU_V7
+	select PINCTRL_ARMADA_39X
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada 39x SoC with device tree.
+
+config MACH_ARMADA_XP
+	bool "Marvell Armada XP boards"
+	depends on ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
+	select ARMADA_XP_CLK
+	select CPU_PJ4B
+	select MACH_MVEBU_V7
+	select PINCTRL_ARMADA_XP
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Armada XP SoC with device tree.
+
+config MACH_DOVE
+	bool "Marvell Dove boards"
+	depends on ARCH_MULTI_V7
+	select CACHE_L2X0
+	select CPU_PJ4
+	select DOVE_CLK
+	select MACH_MVEBU_ANY
+	select ORION_IRQCHIP
+	select ORION_TIMER
+	select PM_GENERIC_DOMAINS if PM
+	select PINCTRL_DOVE
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Dove using flattened device tree.
+
+config MACH_KIRKWOOD
+	bool "Marvell Kirkwood boards"
+	depends on ARCH_MULTI_V5
+	select CPU_FEROCEON
+	select GPIOLIB
+	select KIRKWOOD_CLK
+	select MACH_MVEBU_ANY
+	select ORION_IRQCHIP
+	select ORION_TIMER
+	select FORCE_PCI
+	select PCI_QUIRKS
+	select PINCTRL_KIRKWOOD
+	help
+	  Say 'Y' here if you want your kernel to support boards based
+	  on the Marvell Kirkwood device tree.
+
+endif
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
new file mode 100644
index 000000000..cb106899d
--- /dev/null
+++ b/arch/arm/mach-mvebu/Makefile
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
+AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
+CFLAGS_pmsu.o			:= -march=armv7-a
+
+obj-$(CONFIG_MACH_MVEBU_ANY)	 += system-controller.o mvebu-soc-id.o
+
+ifeq ($(CONFIG_MACH_MVEBU_V7),y)
+obj-y				 += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
+
+obj-$(CONFIG_PM)		 += pm.o pm-board.o
+obj-$(CONFIG_SMP)		 += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
+endif
+
+obj-$(CONFIG_MACH_DOVE)		 += dove.o
+
+ifeq ($(CONFIG_MACH_KIRKWOOD),y)
+obj-y				 += kirkwood.o
+obj-$(CONFIG_PM)		 += kirkwood-pm.o
+endif
diff --git a/arch/arm/mach-mvebu/armada-370-xp.h b/arch/arm/mach-mvebu/armada-370-xp.h
new file mode 100644
index 000000000..09413b678
--- /dev/null
+++ b/arch/arm/mach-mvebu/armada-370-xp.h
@@ -0,0 +1,23 @@
+/*
+ * Generic definitions for Marvell Armada_370_XP SoCs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_ARMADA_370_XP_H
+#define __MACH_ARMADA_370_XP_H
+
+#ifdef CONFIG_SMP
+void armada_xp_secondary_startup(void);
+extern const struct smp_operations armada_xp_smp_ops;
+#endif
+
+#endif /* __MACH_ARMADA_370_XP_H */
diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c
new file mode 100644
index 000000000..d2df5ef93
--- /dev/null
+++ b/arch/arm/mach-mvebu/board-v7.c
@@ -0,0 +1,210 @@
+/*
+ * Device Tree support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/dma-mapping.h>
+#include <linux/memblock.h>
+#include <linux/mbus.h>
+#include <linux/slab.h>
+#include <linux/irqchip.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/smp_scu.h>
+#include "armada-370-xp.h"
+#include "common.h"
+#include "coherency.h"
+#include "mvebu-soc-id.h"
+
+static void __iomem *scu_base;
+
+/*
+ * Enables the SCU when available. Obviously, this is only useful on
+ * Cortex-A based SOCs, not on PJ4B based ones.
+ */
+static void __init mvebu_scu_enable(void)
+{
+	struct device_node *np =
+		of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	if (np) {
+		scu_base = of_iomap(np, 0);
+		scu_enable(scu_base);
+		of_node_put(np);
+	}
+}
+
+void __iomem *mvebu_get_scu_base(void)
+{
+	return scu_base;
+}
+
+/*
+ * When returning from suspend, the platform goes through the
+ * bootloader, which executes its DDR3 training code. This code has
+ * the unfortunate idea of using the first 10 KB of each DRAM bank to
+ * exercise the RAM and calculate the optimal timings. Therefore, this
+ * area of RAM is overwritten, and shouldn't be used by the kernel if
+ * suspend/resume is supported.
+ */
+
+#ifdef CONFIG_SUSPEND
+#define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K)
+static int __init mvebu_scan_mem(unsigned long node, const char *uname,
+				 int depth, void *data)
+{
+	const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	const __be32 *reg, *endp;
+	int l;
+
+	if (type == NULL || strcmp(type, "memory"))
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+	if (reg == NULL)
+		reg = of_get_flat_dt_prop(node, "reg", &l);
+	if (reg == NULL)
+		return 0;
+
+	endp = reg + (l / sizeof(__be32));
+	while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+		u64 base, size;
+
+		base = dt_mem_next_cell(dt_root_addr_cells, &reg);
+		size = dt_mem_next_cell(dt_root_size_cells, &reg);
+
+		memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ);
+	}
+
+	return 0;
+}
+
+static void __init mvebu_memblock_reserve(void)
+{
+	of_scan_flat_dt(mvebu_scan_mem, NULL);
+}
+#else
+static void __init mvebu_memblock_reserve(void) {}
+#endif
+
+static void __init mvebu_init_irq(void)
+{
+	irqchip_init();
+	mvebu_scu_enable();
+	coherency_init();
+	BUG_ON(mvebu_mbus_dt_init(coherency_available()));
+}
+
+static void __init i2c_quirk(void)
+{
+	struct device_node *np;
+	u32 dev, rev;
+
+	/*
+	 * Only revisons more recent than A0 support the offload
+	 * mechanism. We can exit only if we are sure that we can
+	 * get the SoC revision and it is more recent than A0.
+	 */
+	if (mvebu_get_soc_id(&dev, &rev) == 0 && rev > MV78XX0_A0_REV)
+		return;
+
+	for_each_compatible_node(np, NULL, "marvell,mv78230-i2c") {
+		struct property *new_compat;
+
+		new_compat = kzalloc(sizeof(*new_compat), GFP_KERNEL);
+
+		new_compat->name = kstrdup("compatible", GFP_KERNEL);
+		new_compat->length = sizeof("marvell,mv78230-a0-i2c");
+		new_compat->value = kstrdup("marvell,mv78230-a0-i2c",
+						GFP_KERNEL);
+
+		of_update_property(np, new_compat);
+	}
+}
+
+static void __init mvebu_dt_init(void)
+{
+	if (of_machine_is_compatible("marvell,armadaxp"))
+		i2c_quirk();
+}
+
+static void __init armada_370_xp_dt_fixup(void)
+{
+#ifdef CONFIG_SMP
+	smp_set_ops(smp_ops(armada_xp_smp_ops));
+#endif
+}
+
+static const char * const armada_370_xp_dt_compat[] __initconst = {
+	"marvell,armada-370-xp",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_machine	= mvebu_dt_init,
+	.init_irq       = mvebu_init_irq,
+	.restart	= mvebu_restart,
+	.reserve        = mvebu_memblock_reserve,
+	.dt_compat	= armada_370_xp_dt_compat,
+	.dt_fixup	= armada_370_xp_dt_fixup,
+MACHINE_END
+
+static const char * const armada_375_dt_compat[] __initconst = {
+	"marvell,armada375",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_375_DT, "Marvell Armada 375 (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_irq       = mvebu_init_irq,
+	.init_machine	= mvebu_dt_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_375_dt_compat,
+MACHINE_END
+
+static const char * const armada_38x_dt_compat[] __initconst = {
+	"marvell,armada380",
+	"marvell,armada385",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_38X_DT, "Marvell Armada 380/385 (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_irq       = mvebu_init_irq,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_38x_dt_compat,
+MACHINE_END
+
+static const char * const armada_39x_dt_compat[] __initconst = {
+	"marvell,armada390",
+	"marvell,armada398",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADA_39X_DT, "Marvell Armada 39x (Device Tree)")
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+	.init_irq       = mvebu_init_irq,
+	.restart	= mvebu_restart,
+	.dt_compat	= armada_39x_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c
new file mode 100644
index 000000000..49e3c8d20
--- /dev/null
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -0,0 +1,305 @@
+/*
+ * Coherency fabric (Aurora) support for Armada 370, 375, 38x and XP
+ * platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada 370, 375, 38x and XP SOCs have a coherency fabric which is
+ * responsible for ensuring hardware coherency between all CPUs and between
+ * CPUs and I/O masters. This file initializes the coherency fabric and
+ * supplies basic routines for configuring and controlling hardware coherency
+ */
+
+#define pr_fmt(fmt) "mvebu-coherency: " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/smp.h>
+#include <linux/dma-map-ops.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mbus.h>
+#include <linux/pci.h>
+#include <asm/smp_plat.h>
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+#include <asm/dma-mapping.h>
+#include "coherency.h"
+#include "mvebu-soc-id.h"
+
+unsigned long coherency_phys_base;
+void __iomem *coherency_base;
+static void __iomem *coherency_cpu_base;
+static void __iomem *cpu_config_base;
+
+/* Coherency fabric registers */
+#define IO_SYNC_BARRIER_CTL_OFFSET		   0x0
+
+enum {
+	COHERENCY_FABRIC_TYPE_NONE,
+	COHERENCY_FABRIC_TYPE_ARMADA_370_XP,
+	COHERENCY_FABRIC_TYPE_ARMADA_375,
+	COHERENCY_FABRIC_TYPE_ARMADA_380,
+};
+
+static const struct of_device_id of_coherency_table[] = {
+	{.compatible = "marvell,coherency-fabric",
+	 .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_370_XP },
+	{.compatible = "marvell,armada-375-coherency-fabric",
+	 .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_375 },
+	{.compatible = "marvell,armada-380-coherency-fabric",
+	 .data = (void *) COHERENCY_FABRIC_TYPE_ARMADA_380 },
+	{ /* end of list */ },
+};
+
+/* Functions defined in coherency_ll.S */
+int ll_enable_coherency(void);
+void ll_add_cpu_to_smp_group(void);
+
+#define CPU_CONFIG_SHARED_L2 BIT(16)
+
+/*
+ * Disable the "Shared L2 Present" bit in CPU Configuration register
+ * on Armada XP.
+ *
+ * The "Shared L2 Present" bit affects the "level of coherence" value
+ * in the clidr CP15 register.  Cache operation functions such as
+ * "flush all" and "invalidate all" operate on all the cache levels
+ * that included in the defined level of coherence. When HW I/O
+ * coherency is used, this bit causes unnecessary flushes of the L2
+ * cache.
+ */
+static void armada_xp_clear_shared_l2(void)
+{
+	u32 reg;
+
+	if (!cpu_config_base)
+		return;
+
+	reg = readl(cpu_config_base);
+	reg &= ~CPU_CONFIG_SHARED_L2;
+	writel(reg, cpu_config_base);
+}
+
+static int mvebu_hwcc_notifier(struct notifier_block *nb,
+			       unsigned long event, void *__dev)
+{
+	struct device *dev = __dev;
+
+	if (event != BUS_NOTIFY_ADD_DEVICE)
+		return NOTIFY_DONE;
+	set_dma_ops(dev, &arm_coherent_dma_ops);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mvebu_hwcc_nb = {
+	.notifier_call = mvebu_hwcc_notifier,
+};
+
+static struct notifier_block mvebu_hwcc_pci_nb __maybe_unused = {
+	.notifier_call = mvebu_hwcc_notifier,
+};
+
+static int armada_xp_clear_l2_starting(unsigned int cpu)
+{
+	armada_xp_clear_shared_l2();
+	return 0;
+}
+
+static void __init armada_370_coherency_init(struct device_node *np)
+{
+	struct resource res;
+	struct device_node *cpu_config_np;
+
+	of_address_to_resource(np, 0, &res);
+	coherency_phys_base = res.start;
+	/*
+	 * Ensure secondary CPUs will see the updated value,
+	 * which they read before they join the coherency
+	 * fabric, and therefore before they are coherent with
+	 * the boot CPU cache.
+	 */
+	sync_cache_w(&coherency_phys_base);
+	coherency_base = of_iomap(np, 0);
+	coherency_cpu_base = of_iomap(np, 1);
+
+	cpu_config_np = of_find_compatible_node(NULL, NULL,
+						"marvell,armada-xp-cpu-config");
+	if (!cpu_config_np)
+		goto exit;
+
+	cpu_config_base = of_iomap(cpu_config_np, 0);
+	if (!cpu_config_base) {
+		of_node_put(cpu_config_np);
+		goto exit;
+	}
+
+	of_node_put(cpu_config_np);
+
+	cpuhp_setup_state_nocalls(CPUHP_AP_ARM_MVEBU_COHERENCY,
+				  "arm/mvebu/coherency:starting",
+				  armada_xp_clear_l2_starting, NULL);
+exit:
+	set_cpu_coherent();
+}
+
+/*
+ * This ioremap hook is used on Armada 375/38x to ensure that all MMIO
+ * areas are mapped as MT_UNCACHED instead of MT_DEVICE. This is
+ * needed for the HW I/O coherency mechanism to work properly without
+ * deadlock.
+ */
+static void __iomem *
+armada_wa_ioremap_caller(phys_addr_t phys_addr, size_t size,
+			 unsigned int mtype, void *caller)
+{
+	mtype = MT_UNCACHED;
+	return __arm_ioremap_caller(phys_addr, size, mtype, caller);
+}
+
+static void __init armada_375_380_coherency_init(struct device_node *np)
+{
+	struct device_node *cache_dn;
+
+	coherency_cpu_base = of_iomap(np, 0);
+	arch_ioremap_caller = armada_wa_ioremap_caller;
+	pci_ioremap_set_mem_type(MT_UNCACHED);
+
+	/*
+	 * We should switch the PL310 to I/O coherency mode only if
+	 * I/O coherency is actually enabled.
+	 */
+	if (!coherency_available())
+		return;
+
+	/*
+	 * Add the PL310 property "arm,io-coherent". This makes sure the
+	 * outer sync operation is not used, which allows to
+	 * workaround the system erratum that causes deadlocks when
+	 * doing PCIe in an SMP situation on Armada 375 and Armada
+	 * 38x.
+	 */
+	for_each_compatible_node(cache_dn, NULL, "arm,pl310-cache") {
+		struct property *p;
+
+		p = kzalloc(sizeof(*p), GFP_KERNEL);
+		p->name = kstrdup("arm,io-coherent", GFP_KERNEL);
+		of_add_property(cache_dn, p);
+	}
+}
+
+static int coherency_type(void)
+{
+	struct device_node *np;
+	const struct of_device_id *match;
+	int type;
+
+	/*
+	 * The coherency fabric is needed:
+	 * - For coherency between processors on Armada XP, so only
+	 *   when SMP is enabled.
+	 * - For coherency between the processor and I/O devices, but
+	 *   this coherency requires many pre-requisites (write
+	 *   allocate cache policy, shareable pages, SMP bit set) that
+	 *   are only meant in SMP situations.
+	 *
+	 * Note that this means that on Armada 370, there is currently
+	 * no way to use hardware I/O coherency, because even when
+	 * CONFIG_SMP is enabled, is_smp() returns false due to the
+	 * Armada 370 being a single-core processor. To lift this
+	 * limitation, we would have to find a way to make the cache
+	 * policy set to write-allocate (on all Armada SoCs), and to
+	 * set the shareable attribute in page tables (on all Armada
+	 * SoCs except the Armada 370). Unfortunately, such decisions
+	 * are taken very early in the kernel boot process, at a point
+	 * where we don't know yet on which SoC we are running.
+
+	 */
+	if (!is_smp())
+		return COHERENCY_FABRIC_TYPE_NONE;
+
+	np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
+	if (!np)
+		return COHERENCY_FABRIC_TYPE_NONE;
+
+	type = (int) match->data;
+
+	of_node_put(np);
+
+	return type;
+}
+
+int set_cpu_coherent(void)
+{
+	int type = coherency_type();
+
+	if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP) {
+		if (!coherency_base) {
+			pr_warn("Can't make current CPU cache coherent.\n");
+			pr_warn("Coherency fabric is not initialized\n");
+			return 1;
+		}
+
+		armada_xp_clear_shared_l2();
+		ll_add_cpu_to_smp_group();
+		return ll_enable_coherency();
+	}
+
+	return 0;
+}
+
+int coherency_available(void)
+{
+	return coherency_type() != COHERENCY_FABRIC_TYPE_NONE;
+}
+
+int __init coherency_init(void)
+{
+	int type = coherency_type();
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, of_coherency_table);
+
+	if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
+		armada_370_coherency_init(np);
+	else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 ||
+		 type == COHERENCY_FABRIC_TYPE_ARMADA_380)
+		armada_375_380_coherency_init(np);
+
+	of_node_put(np);
+
+	return 0;
+}
+
+static int __init coherency_late_init(void)
+{
+	if (coherency_available())
+		bus_register_notifier(&platform_bus_type,
+				      &mvebu_hwcc_nb);
+	return 0;
+}
+
+postcore_initcall(coherency_late_init);
+
+#if IS_ENABLED(CONFIG_PCI)
+static int __init coherency_pci_init(void)
+{
+	if (coherency_available())
+		bus_register_notifier(&pci_bus_type,
+				       &mvebu_hwcc_pci_nb);
+	return 0;
+}
+
+arch_initcall(coherency_pci_init);
+#endif
diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h
new file mode 100644
index 000000000..6067f1426
--- /dev/null
+++ b/arch/arm/mach-mvebu/coherency.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-mvebu/include/mach/coherency.h
+ *
+ *
+ * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_370_XP_COHERENCY_H
+#define __MACH_370_XP_COHERENCY_H
+
+extern void __iomem *coherency_base;	/* for coherency_ll.S */
+extern unsigned long coherency_phys_base;
+int set_cpu_coherent(void);
+
+int coherency_init(void);
+int coherency_available(void);
+
+#endif	/* __MACH_370_XP_COHERENCY_H */
diff --git a/arch/arm/mach-mvebu/coherency_ll.S b/arch/arm/mach-mvebu/coherency_ll.S
new file mode 100644
index 000000000..a3a64bf97
--- /dev/null
+++ b/arch/arm/mach-mvebu/coherency_ll.S
@@ -0,0 +1,161 @@
+/*
+ * Coherency fabric: low level functions
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file implements the assembly function to add a CPU to the
+ * coherency fabric. This function is called by each of the secondary
+ * CPUs during their early boot in an SMP kernel, this why this
+ * function have to callable from assembly. It can also be called by a
+ * primary CPU from C code during its boot.
+ */
+
+#include <linux/linkage.h>
+#define ARMADA_XP_CFB_CTL_REG_OFFSET 0x0
+#define ARMADA_XP_CFB_CFG_REG_OFFSET 0x4
+
+#include <asm/assembler.h>
+#include <asm/cp15.h>
+
+	.text
+/*
+ * Returns the coherency base address in r1 (r0 is untouched), or 0 if
+ * the coherency fabric is not enabled.
+ */
+ENTRY(ll_get_coherency_base)
+	mrc	p15, 0, r1, c1, c0, 0
+	tst	r1, #CR_M @ Check MMU bit enabled
+	bne	1f
+
+	/*
+	 * MMU is disabled, use the physical address of the coherency
+	 * base address, (or 0x0 if the coherency fabric is not mapped)
+	 */
+	adr	r1, 3f
+	ldr	r3, [r1]
+	ldr	r1, [r1, r3]
+	b	2f
+1:
+	/*
+	 * MMU is enabled, use the virtual address of the coherency
+	 * base address.
+	 */
+	ldr	r1, =coherency_base
+	ldr	r1, [r1]
+2:
+	ret	lr
+ENDPROC(ll_get_coherency_base)
+
+/*
+ * Returns the coherency CPU mask in r3 (r0 is untouched). This
+ * coherency CPU mask can be used with the coherency fabric
+ * configuration and control registers. Note that the mask is already
+ * endian-swapped as appropriate so that the calling functions do not
+ * have to care about endianness issues while accessing the coherency
+ * fabric registers
+ */
+ENTRY(ll_get_coherency_cpumask)
+	mrc	p15, 0, r3, cr0, cr0, 5
+	and	r3, r3, #15
+	mov	r2, #(1 << 24)
+	lsl	r3, r2, r3
+ARM_BE8(rev	r3, r3)
+	ret	lr
+ENDPROC(ll_get_coherency_cpumask)
+
+/*
+ * ll_add_cpu_to_smp_group(), ll_enable_coherency() and
+ * ll_disable_coherency() use the strex/ldrex instructions while the
+ * MMU can be disabled. The Armada XP SoC has an exclusive monitor
+ * that tracks transactions to Device and/or SO memory and thanks to
+ * that, exclusive transactions are functional even when the MMU is
+ * disabled.
+ */
+
+ENTRY(ll_add_cpu_to_smp_group)
+	/*
+	 * As r0 is not modified by ll_get_coherency_base() and
+	 * ll_get_coherency_cpumask(), we use it to temporarly save lr
+	 * and avoid it being modified by the branch and link
+	 * calls. This function is used very early in the secondary
+	 * CPU boot, and no stack is available at this point.
+	 */
+	mov 	r0, lr
+	bl	ll_get_coherency_base
+	/* Bail out if the coherency is not enabled */
+	cmp	r1, #0
+	reteq	r0
+	bl	ll_get_coherency_cpumask
+	mov 	lr, r0
+	add	r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET
+1:
+	ldrex	r2, [r0]
+	orr	r2, r2, r3
+	strex	r1, r2, [r0]
+	cmp	r1, #0
+	bne	1b
+	ret	lr
+ENDPROC(ll_add_cpu_to_smp_group)
+
+ENTRY(ll_enable_coherency)
+	/*
+	 * As r0 is not modified by ll_get_coherency_base() and
+	 * ll_get_coherency_cpumask(), we use it to temporarly save lr
+	 * and avoid it being modified by the branch and link
+	 * calls. This function is used very early in the secondary
+	 * CPU boot, and no stack is available at this point.
+	 */
+	mov r0, lr
+	bl	ll_get_coherency_base
+	/* Bail out if the coherency is not enabled */
+	cmp	r1, #0
+	reteq	r0
+	bl	ll_get_coherency_cpumask
+	mov lr, r0
+	add	r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
+1:
+	ldrex	r2, [r0]
+	orr	r2, r2, r3
+	strex	r1, r2, [r0]
+	cmp	r1, #0
+	bne	1b
+	dsb
+	mov	r0, #0
+	ret	lr
+ENDPROC(ll_enable_coherency)
+
+ENTRY(ll_disable_coherency)
+	/*
+	 * As r0 is not modified by ll_get_coherency_base() and
+	 * ll_get_coherency_cpumask(), we use it to temporarly save lr
+	 * and avoid it being modified by the branch and link
+	 * calls. This function is used very early in the secondary
+	 * CPU boot, and no stack is available at this point.
+	 */
+	mov 	r0, lr
+	bl	ll_get_coherency_base
+	/* Bail out if the coherency is not enabled */
+	cmp	r1, #0
+	reteq	r0
+	bl	ll_get_coherency_cpumask
+	mov 	lr, r0
+	add	r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
+1:
+	ldrex	r2, [r0]
+	bic	r2, r2, r3
+	strex	r1, r2, [r0]
+	cmp	r1, #0
+	bne	1b
+	dsb
+	ret	lr
+ENDPROC(ll_disable_coherency)
+
+	.align 2
+3:
+	.long	coherency_phys_base - .
diff --git a/arch/arm/mach-mvebu/common.h b/arch/arm/mach-mvebu/common.h
new file mode 100644
index 000000000..6b775492c
--- /dev/null
+++ b/arch/arm/mach-mvebu/common.h
@@ -0,0 +1,30 @@
+/*
+ * Core functions for Marvell System On Chip
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_MVEBU_COMMON_H
+#define __ARCH_MVEBU_COMMON_H
+
+#include <linux/reboot.h>
+
+void mvebu_restart(enum reboot_mode mode, const char *cmd);
+int mvebu_cpu_reset_deassert(int cpu);
+void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr);
+void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr);
+int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev);
+
+void __iomem *mvebu_get_scu_base(void);
+
+int mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg,
+							u32 srcmd));
+#endif
diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c
new file mode 100644
index 000000000..f33a31c6a
--- /dev/null
+++ b/arch/arm/mach-mvebu/cpu-reset.c
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "mvebu-cpureset: " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/resource.h>
+
+#include "common.h"
+
+static void __iomem *cpu_reset_base;
+static size_t cpu_reset_size;
+
+#define CPU_RESET_OFFSET(cpu) (cpu * 0x8)
+#define CPU_RESET_ASSERT      BIT(0)
+
+int mvebu_cpu_reset_deassert(int cpu)
+{
+	u32 reg;
+
+	if (!cpu_reset_base)
+		return -ENODEV;
+
+	if (CPU_RESET_OFFSET(cpu) >= cpu_reset_size)
+		return -EINVAL;
+
+	reg = readl(cpu_reset_base + CPU_RESET_OFFSET(cpu));
+	reg &= ~CPU_RESET_ASSERT;
+	writel(reg, cpu_reset_base + CPU_RESET_OFFSET(cpu));
+
+	return 0;
+}
+
+static int mvebu_cpu_reset_map(struct device_node *np, int res_idx)
+{
+	struct resource res;
+
+	if (of_address_to_resource(np, res_idx, &res)) {
+		pr_err("unable to get resource\n");
+		return -ENOENT;
+	}
+
+	if (!request_mem_region(res.start, resource_size(&res),
+				np->full_name)) {
+		pr_err("unable to request region\n");
+		return -EBUSY;
+	}
+
+	cpu_reset_base = ioremap(res.start, resource_size(&res));
+	if (!cpu_reset_base) {
+		pr_err("unable to map registers\n");
+		release_mem_region(res.start, resource_size(&res));
+		return -ENOMEM;
+	}
+
+	cpu_reset_size = resource_size(&res);
+
+	return 0;
+}
+
+static int __init mvebu_cpu_reset_init(void)
+{
+	struct device_node *np;
+	int res_idx;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL,
+				     "marvell,armada-370-cpu-reset");
+	if (np) {
+		res_idx = 0;
+	} else {
+		/*
+		 * This code is kept for backward compatibility with
+		 * old Device Trees.
+		 */
+		np = of_find_compatible_node(NULL, NULL,
+					     "marvell,armada-370-xp-pmsu");
+		if (np) {
+			pr_warn(FW_WARN "deprecated pmsu binding\n");
+			res_idx = 1;
+		}
+	}
+
+	/* No reset node found */
+	if (!np)
+		return -ENODEV;
+
+	ret = mvebu_cpu_reset_map(np, res_idx);
+	of_node_put(np);
+
+	return ret;
+}
+
+early_initcall(mvebu_cpu_reset_init);
diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c
new file mode 100644
index 000000000..d076c5771
--- /dev/null
+++ b/arch/arm/mach-mvebu/dove.c
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-mvebu/dove.c
+ *
+ * Marvell Dove 88AP510 System On Chip FDT Board
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/of.h>
+#include <linux/soc/dove/pmu.h>
+#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+
+static void __init dove_init(void)
+{
+	pr_info("Dove 88AP510 SoC\n");
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init(0);
+#endif
+	BUG_ON(mvebu_mbus_dt_init(false));
+	dove_init_pmu();
+}
+
+static const char * const dove_dt_compat[] __initconst = {
+	"marvell,dove",
+	NULL
+};
+
+DT_MACHINE_START(DOVE_DT, "Marvell Dove")
+	.init_machine	= dove_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= dove_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S
new file mode 100644
index 000000000..b093a196e
--- /dev/null
+++ b/arch/arm/mach-mvebu/headsmp-a9.S
@@ -0,0 +1,23 @@
+/*
+ * SMP support: Entry point for secondary CPUs of Marvell EBU
+ * Cortex-A9 based SOCs (Armada 375 and Armada 38x).
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/assembler.h>
+
+ENTRY(mvebu_cortex_a9_secondary_startup)
+ARM_BE8(setend	be)
+	bl	armada_38x_scu_power_up
+	b	secondary_startup
+ENDPROC(mvebu_cortex_a9_secondary_startup)
diff --git a/arch/arm/mach-mvebu/headsmp.S b/arch/arm/mach-mvebu/headsmp.S
new file mode 100644
index 000000000..2c4032e36
--- /dev/null
+++ b/arch/arm/mach-mvebu/headsmp.S
@@ -0,0 +1,40 @@
+/*
+ * SMP support: Entry point for secondary CPUs
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * This file implements the assembly entry point for secondary CPUs in
+ * an SMP kernel. The only thing we need to do is to add the CPU to
+ * the coherency fabric by writing to 2 registers. Currently the base
+ * register addresses are hard coded due to the early initialisation
+ * problems.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+
+/*
+ * Armada XP specific entry point for secondary CPUs.
+ * We add the CPU to the coherency fabric and then jump to secondary
+ * startup
+ */
+ENTRY(armada_xp_secondary_startup)
+ ARM_BE8(setend	be )			@ go BE8 if entered LE
+
+	bl	ll_add_cpu_to_smp_group
+
+	bl	ll_enable_coherency
+
+	b	secondary_startup
+
+ENDPROC(armada_xp_secondary_startup)
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c
new file mode 100644
index 000000000..7c65ea2a8
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+#include <linux/io.h>
+#include "kirkwood.h"
+#include "kirkwood-pm.h"
+
+static void __iomem *ddr_operation_base;
+static void __iomem *memory_pm_ctrl;
+
+static void kirkwood_low_power(void)
+{
+	u32 mem_pm_ctrl;
+
+	mem_pm_ctrl = readl(memory_pm_ctrl);
+
+	/* Set peripherals to low-power mode */
+	writel_relaxed(~0, memory_pm_ctrl);
+
+	/* Set DDR in self-refresh */
+	writel_relaxed(0x7, ddr_operation_base);
+
+	/*
+	 * Set CPU in wait-for-interrupt state.
+	 * This disables the CPU core clocks,
+	 * the array clocks, and also the L2 controller.
+	 */
+	cpu_do_idle();
+
+	writel_relaxed(mem_pm_ctrl, memory_pm_ctrl);
+}
+
+static int kirkwood_suspend_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		kirkwood_low_power();
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int kirkwood_pm_valid_standby(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY;
+}
+
+static const struct platform_suspend_ops kirkwood_suspend_ops = {
+	.enter = kirkwood_suspend_enter,
+	.valid = kirkwood_pm_valid_standby,
+};
+
+void __init kirkwood_pm_init(void)
+{
+	ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
+	memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4);
+
+	suspend_set_ops(&kirkwood_suspend_ops);
+}
diff --git a/arch/arm/mach-mvebu/kirkwood-pm.h b/arch/arm/mach-mvebu/kirkwood-pm.h
new file mode 100644
index 000000000..7ce7fac39
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood-pm.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Power Management driver for Marvell Kirkwood SoCs
+ *
+ * Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
+ * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
+ */
+
+#ifndef __ARCH_KIRKWOOD_PM_H
+#define __ARCH_KIRKWOOD_PM_H
+
+#ifdef CONFIG_PM
+void kirkwood_pm_init(void);
+#else
+static inline void kirkwood_pm_init(void) {};
+#endif
+
+#endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
new file mode 100644
index 000000000..ceaad6d59
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-mvebu/kirkwood.c
+ *
+ * Flattened Device Tree board initialization
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <asm/hardware/cache-feroceon-l2.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include "kirkwood.h"
+#include "kirkwood-pm.h"
+#include "common.h"
+
+static struct resource kirkwood_cpufreq_resources[] = {
+	[0] = {
+		.start  = CPU_CONTROL_PHYS,
+		.end    = CPU_CONTROL_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device kirkwood_cpufreq_device = {
+	.name		= "kirkwood-cpufreq",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_cpufreq_resources),
+	.resource	= kirkwood_cpufreq_resources,
+};
+
+static void __init kirkwood_cpufreq_init(void)
+{
+	platform_device_register(&kirkwood_cpufreq_device);
+}
+
+static struct resource kirkwood_cpuidle_resource[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+		.start	= DDR_OPERATION_BASE,
+		.end	= DDR_OPERATION_BASE + 3,
+	},
+};
+
+static struct platform_device kirkwood_cpuidle = {
+	.name		= "kirkwood_cpuidle",
+	.id		= -1,
+	.resource	= kirkwood_cpuidle_resource,
+	.num_resources	= 1,
+};
+
+static void __init kirkwood_cpuidle_init(void)
+{
+	platform_device_register(&kirkwood_cpuidle);
+}
+
+#define MV643XX_ETH_MAC_ADDR_LOW	0x0414
+#define MV643XX_ETH_MAC_ADDR_HIGH	0x0418
+
+static void __init kirkwood_dt_eth_fixup(void)
+{
+	struct device_node *np;
+
+	/*
+	 * The ethernet interfaces forget the MAC address assigned by u-boot
+	 * if the clocks are turned off. Usually, u-boot on kirkwood boards
+	 * has no DT support to properly set local-mac-address property.
+	 * As a workaround, we get the MAC address from mv643xx_eth registers
+	 * and update the port device node if no valid MAC address is set.
+	 */
+	for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
+		struct device_node *pnp = of_get_parent(np);
+		struct clk *clk;
+		struct property *pmac;
+		void __iomem *io;
+		u8 *macaddr;
+		u32 reg;
+
+		if (!pnp)
+			continue;
+
+		/* skip disabled nodes or nodes with valid MAC address*/
+		if (!of_device_is_available(pnp) ||
+		    !IS_ERR(of_get_mac_address(np)))
+			goto eth_fixup_skip;
+
+		clk = of_clk_get(pnp, 0);
+		if (IS_ERR(clk))
+			goto eth_fixup_skip;
+
+		io = of_iomap(pnp, 0);
+		if (!io)
+			goto eth_fixup_no_map;
+
+		/* ensure port clock is not gated to not hang CPU */
+		clk_prepare_enable(clk);
+
+		/* store MAC address register contents in local-mac-address */
+		pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
+		if (!pmac)
+			goto eth_fixup_no_mem;
+
+		pmac->value = pmac + 1;
+		pmac->length = 6;
+		pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
+		if (!pmac->name) {
+			kfree(pmac);
+			goto eth_fixup_no_mem;
+		}
+
+		macaddr = pmac->value;
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
+		macaddr[0] = (reg >> 24) & 0xff;
+		macaddr[1] = (reg >> 16) & 0xff;
+		macaddr[2] = (reg >> 8) & 0xff;
+		macaddr[3] = reg & 0xff;
+
+		reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
+		macaddr[4] = (reg >> 8) & 0xff;
+		macaddr[5] = reg & 0xff;
+
+		of_update_property(np, pmac);
+
+eth_fixup_no_mem:
+		iounmap(io);
+		clk_disable_unprepare(clk);
+eth_fixup_no_map:
+		clk_put(clk);
+eth_fixup_skip:
+		of_node_put(pnp);
+	}
+}
+
+/*
+ * Disable propagation of mbus errors to the CPU local bus, as this
+ * causes mbus errors (which can occur for example for PCI aborts) to
+ * throw CPU aborts, which we're not set up to deal with.
+ */
+static void kirkwood_disable_mbus_error_propagation(void)
+{
+	void __iomem *cpu_config;
+
+	cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
+	writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
+}
+
+static struct of_dev_auxdata auxdata[] __initdata = {
+	OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
+		       "mvebu-audio", NULL),
+	{ /* sentinel */ }
+};
+
+static void __init kirkwood_dt_init(void)
+{
+	kirkwood_disable_mbus_error_propagation();
+
+	BUG_ON(mvebu_mbus_dt_init(false));
+
+#ifdef CONFIG_CACHE_FEROCEON_L2
+	feroceon_of_init();
+#endif
+	kirkwood_cpufreq_init();
+	kirkwood_cpuidle_init();
+
+	kirkwood_pm_init();
+	kirkwood_dt_eth_fixup();
+
+	of_platform_default_populate(NULL, auxdata, NULL);
+}
+
+static const char * const kirkwood_dt_board_compat[] __initconst = {
+	"marvell,kirkwood",
+	NULL
+};
+
+DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
+	/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
+	.init_machine	= kirkwood_dt_init,
+	.restart	= mvebu_restart,
+	.dt_compat	= kirkwood_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-mvebu/kirkwood.h b/arch/arm/mach-mvebu/kirkwood.h
new file mode 100644
index 000000000..89f3d1f51
--- /dev/null
+++ b/arch/arm/mach-mvebu/kirkwood.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-mvebu/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ * 88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KIRKWOOD_REGS_PHYS_BASE	0xf1000000
+#define DDR_PHYS_BASE           (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define BRIDGE_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+
+#define DDR_OPERATION_BASE	(DDR_PHYS_BASE + 0x1418)
+
+#define CPU_CONFIG_PHYS		(BRIDGE_PHYS_BASE + 0x0100)
+#define CPU_CONFIG_ERROR_PROP	0x00000004
+
+#define CPU_CONTROL_PHYS	(BRIDGE_PHYS_BASE + 0x0104)
+#define MEMORY_PM_CTRL_PHYS	(BRIDGE_PHYS_BASE + 0x0118)
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.c b/arch/arm/mach-mvebu/mvebu-soc-id.c
new file mode 100644
index 000000000..a99434bce
--- /dev/null
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -0,0 +1,178 @@
+/*
+ * ID and revision information for mvebu SoCs
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * All the mvebu SoCs have information related to their variant and
+ * revision that can be read from the PCI control register. This is
+ * done before the PCI initialization to avoid any conflict. Once the
+ * ID and revision are retrieved, the mapping is freed.
+ */
+
+#define pr_fmt(fmt) "mvebu-soc-id: " fmt
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include "common.h"
+#include "mvebu-soc-id.h"
+
+#define PCIE_DEV_ID_OFF		0x0
+#define PCIE_DEV_REV_OFF	0x8
+
+#define SOC_ID_MASK	    0xFFFF0000
+#define SOC_REV_MASK	    0xFF
+
+static u32 soc_dev_id;
+static u32 soc_rev;
+static bool is_id_valid;
+
+static const struct of_device_id mvebu_pcie_of_match_table[] = {
+	{ .compatible = "marvell,armada-xp-pcie", },
+	{ .compatible = "marvell,armada-370-pcie", },
+	{ .compatible = "marvell,kirkwood-pcie" },
+	{},
+};
+
+int mvebu_get_soc_id(u32 *dev, u32 *rev)
+{
+	if (is_id_valid) {
+		*dev = soc_dev_id;
+		*rev = soc_rev;
+		return 0;
+	} else
+		return -ENODEV;
+}
+
+static int __init get_soc_id_by_pci(void)
+{
+	struct device_node *np;
+	int ret = 0;
+	void __iomem *pci_base;
+	struct clk *clk;
+	struct device_node *child;
+
+	np = of_find_matching_node(NULL, mvebu_pcie_of_match_table);
+	if (!np)
+		return ret;
+
+	/*
+	 * ID and revision are available from any port, so we
+	 * just pick the first one
+	 */
+	child = of_get_next_child(np, NULL);
+	if (child == NULL) {
+		pr_err("cannot get pci node\n");
+		ret = -ENOMEM;
+		goto clk_err;
+	}
+
+	clk = of_clk_get_by_name(child, NULL);
+	if (IS_ERR(clk)) {
+		pr_err("cannot get clock\n");
+		ret = -ENOMEM;
+		goto clk_err;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("cannot enable clock\n");
+		goto clk_err;
+	}
+
+	pci_base = of_iomap(child, 0);
+	if (pci_base == NULL) {
+		pr_err("cannot map registers\n");
+		ret = -ENOMEM;
+		goto res_ioremap;
+	}
+
+	/* SoC ID */
+	soc_dev_id = readl(pci_base + PCIE_DEV_ID_OFF) >> 16;
+
+	/* SoC revision */
+	soc_rev = readl(pci_base + PCIE_DEV_REV_OFF) & SOC_REV_MASK;
+
+	is_id_valid = true;
+
+	pr_info("MVEBU SoC ID=0x%X, Rev=0x%X\n", soc_dev_id, soc_rev);
+
+	iounmap(pci_base);
+
+res_ioremap:
+	/*
+	 * If the PCIe unit is actually enabled and we have PCI
+	 * support in the kernel, we intentionally do not release the
+	 * reference to the clock. We want to keep it running since
+	 * the bootloader does some PCIe link configuration that the
+	 * kernel is for now unable to do, and gating the clock would
+	 * make us loose this precious configuration.
+	 */
+	if (!of_device_is_available(child) || !IS_ENABLED(CONFIG_PCI_MVEBU)) {
+		clk_disable_unprepare(clk);
+		clk_put(clk);
+	}
+
+clk_err:
+	of_node_put(child);
+	of_node_put(np);
+
+	return ret;
+}
+
+static int __init mvebu_soc_id_init(void)
+{
+
+	/*
+	 * First try to get the ID and the revision by the system
+	 * register and use PCI registers only if it is not possible
+	 */
+	if (!mvebu_system_controller_get_soc_id(&soc_dev_id, &soc_rev)) {
+		is_id_valid = true;
+		pr_info("MVEBU SoC ID=0x%X, Rev=0x%X\n", soc_dev_id, soc_rev);
+		return 0;
+	}
+
+	return get_soc_id_by_pci();
+}
+early_initcall(mvebu_soc_id_init);
+
+static int __init mvebu_soc_device(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+
+	/* Also protects against running on non-mvebu systems */
+	if (!is_id_valid)
+		return 0;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->family = kasprintf(GFP_KERNEL, "Marvell");
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X", soc_rev);
+	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%X", soc_dev_id);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr->soc_id);
+		kfree(soc_dev_attr);
+	}
+
+	return 0;
+}
+postcore_initcall(mvebu_soc_device);
diff --git a/arch/arm/mach-mvebu/mvebu-soc-id.h b/arch/arm/mach-mvebu/mvebu-soc-id.h
new file mode 100644
index 000000000..e124a0b82
--- /dev/null
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.h
@@ -0,0 +1,54 @@
+/*
+ * Marvell EBU SoC ID and revision definitions.
+ *
+ * Copyright (C) 2014 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __LINUX_MVEBU_SOC_ID_H
+#define __LINUX_MVEBU_SOC_ID_H
+
+/* Armada XP ID */
+#define MV78230_DEV_ID	    0x7823
+#define MV78260_DEV_ID	    0x7826
+#define MV78460_DEV_ID	    0x7846
+
+/* Armada XP Revision */
+#define MV78XX0_A0_REV	    0x1
+#define MV78XX0_B0_REV	    0x2
+
+/* Amada 370 ID */
+#define ARMADA_370_DEV_ID   0x6710
+
+/* Amada 370 Revision */
+#define ARMADA_370_A1_REV   0x1
+
+/* Armada 375 ID */
+#define ARMADA_375_DEV_ID   0x6720
+
+/* Armada 375 */
+#define ARMADA_375_Z1_REV   0x0
+#define ARMADA_375_A0_REV   0x3
+
+/* Armada 38x ID */
+#define ARMADA_380_DEV_ID   0x6810
+#define ARMADA_385_DEV_ID   0x6820
+#define ARMADA_388_DEV_ID   0x6828
+
+/* Armada 38x Revision */
+#define ARMADA_38x_Z1_REV   0x0
+#define ARMADA_38x_A0_REV   0x4
+
+#ifdef CONFIG_ARCH_MVEBU
+int mvebu_get_soc_id(u32 *dev, u32 *rev);
+#else
+static inline int mvebu_get_soc_id(u32 *dev, u32 *rev)
+{
+	return -1;
+}
+#endif
+
+#endif /* __LINUX_MVEBU_SOC_ID_H */
diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c
new file mode 100644
index 000000000..d715dec1c
--- /dev/null
+++ b/arch/arm/mach-mvebu/platsmp-a9.c
@@ -0,0 +1,114 @@
+/*
+ * Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9
+ * based SOCs (Armada 375/38x).
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/smp.h>
+#include <linux/mbus.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include "common.h"
+#include "pmsu.h"
+
+extern void mvebu_cortex_a9_secondary_startup(void);
+
+static int mvebu_cortex_a9_boot_secondary(unsigned int cpu,
+						    struct task_struct *idle)
+{
+	int ret, hw_cpu;
+
+	pr_info("Booting CPU %d\n", cpu);
+
+	/*
+	 * Write the address of secondary startup into the system-wide
+	 * flags register. The boot monitor waits until it receives a
+	 * soft interrupt, and then the secondary CPU branches to this
+	 * address.
+	 */
+	hw_cpu = cpu_logical_map(cpu);
+	if (of_machine_is_compatible("marvell,armada375"))
+		mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup);
+	else
+		mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cortex_a9_secondary_startup);
+	smp_wmb();
+
+	/*
+	 * Doing this before deasserting the CPUs is needed to wake up CPUs
+	 * in the offline state after using CPU hotplug.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	ret = mvebu_cpu_reset_deassert(hw_cpu);
+	if (ret) {
+		pr_err("Could not start the secondary CPU: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+/*
+ * When a CPU is brought back online, either through CPU hotplug, or
+ * because of the boot of a kexec'ed kernel, the PMSU configuration
+ * for this CPU might be in the deep idle state, preventing this CPU
+ * from receiving interrupts. Here, we therefore take out the current
+ * CPU from this state, which was entered by armada_38x_cpu_die()
+ * below.
+ */
+static void armada_38x_secondary_init(unsigned int cpu)
+{
+	mvebu_v7_pmsu_idle_exit();
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void armada_38x_cpu_die(unsigned int cpu)
+{
+	/*
+	 * CPU hotplug is implemented by putting offline CPUs into the
+	 * deep idle sleep state.
+	 */
+	armada_38x_do_cpu_suspend(true);
+}
+
+/*
+ * We need a dummy function, so that platform_can_cpu_hotplug() knows
+ * we support CPU hotplug. However, the function does not need to do
+ * anything, because CPUs going offline can enter the deep idle state
+ * by themselves, without any help from a still alive CPU.
+ */
+static int armada_38x_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+#endif
+
+static const struct smp_operations mvebu_cortex_a9_smp_ops __initconst = {
+	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
+};
+
+static const struct smp_operations armada_38x_smp_ops __initconst = {
+	.smp_boot_secondary	= mvebu_cortex_a9_boot_secondary,
+	.smp_secondary_init     = armada_38x_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_38x_cpu_die,
+	.cpu_kill               = armada_38x_cpu_kill,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
+		      &mvebu_cortex_a9_smp_ops);
+CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp",
+		      &armada_38x_smp_ops);
+CPU_METHOD_OF_DECLARE(mvebu_armada_390_smp, "marvell,armada-390-smp",
+		      &armada_38x_smp_ops);
diff --git a/arch/arm/mach-mvebu/platsmp.c b/arch/arm/mach-mvebu/platsmp.c
new file mode 100644
index 000000000..c130497dc
--- /dev/null
+++ b/arch/arm/mach-mvebu/platsmp.c
@@ -0,0 +1,258 @@
+/*
+ * Symmetric Multi Processing (SMP) support for Armada XP
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada XP SoC has 4 ARMv7 PJ4B CPUs running in full HW coherency
+ * This file implements the routines for preparing the SMP infrastructure
+ * and waking up the secondary CPUs
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/mbus.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include "common.h"
+#include "armada-370-xp.h"
+#include "pmsu.h"
+#include "coherency.h"
+
+#define ARMADA_XP_MAX_CPUS 4
+
+#define AXP_BOOTROM_BASE 0xfff00000
+#define AXP_BOOTROM_SIZE 0x100000
+
+static struct clk *boot_cpu_clk;
+
+static struct clk *get_cpu_clk(int cpu)
+{
+	struct clk *cpu_clk;
+	struct device_node *np = of_get_cpu_node(cpu, NULL);
+
+	if (WARN(!np, "missing cpu node\n"))
+		return NULL;
+	cpu_clk = of_clk_get(np, 0);
+	if (WARN_ON(IS_ERR(cpu_clk)))
+		return NULL;
+	return cpu_clk;
+}
+
+static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int ret, hw_cpu;
+
+	pr_info("Booting CPU %d\n", cpu);
+
+	hw_cpu = cpu_logical_map(cpu);
+	mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup);
+
+	/*
+	 * This is needed to wake up CPUs in the offline state after
+	 * using CPU hotplug.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	/*
+	 * This is needed to take secondary CPUs out of reset on the
+	 * initial boot.
+	 */
+	ret = mvebu_cpu_reset_deassert(hw_cpu);
+	if (ret) {
+		pr_warn("unable to boot CPU: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * When a CPU is brought back online, either through CPU hotplug, or
+ * because of the boot of a kexec'ed kernel, the PMSU configuration
+ * for this CPU might be in the deep idle state, preventing this CPU
+ * from receiving interrupts. Here, we therefore take out the current
+ * CPU from this state, which was entered by armada_xp_cpu_die()
+ * below.
+ */
+static void armada_xp_secondary_init(unsigned int cpu)
+{
+	mvebu_v7_pmsu_idle_exit();
+}
+
+static void __init armada_xp_smp_init_cpus(void)
+{
+	unsigned int ncores = num_possible_cpus();
+
+	if (ncores == 0 || ncores > ARMADA_XP_MAX_CPUS)
+		panic("Invalid number of CPUs in DT\n");
+}
+
+static int armada_xp_sync_secondary_clk(unsigned int cpu)
+{
+	struct clk *cpu_clk = get_cpu_clk(cpu);
+
+	if (!cpu_clk || !boot_cpu_clk)
+		return 0;
+
+	clk_prepare_enable(cpu_clk);
+	clk_set_rate(cpu_clk, clk_get_rate(boot_cpu_clk));
+
+	return 0;
+}
+
+static void __init armada_xp_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *node;
+	struct resource res;
+	int err;
+
+	flush_cache_all();
+	set_cpu_coherent();
+
+	boot_cpu_clk = get_cpu_clk(smp_processor_id());
+	if (boot_cpu_clk) {
+		clk_prepare_enable(boot_cpu_clk);
+		cpuhp_setup_state_nocalls(CPUHP_AP_ARM_MVEBU_SYNC_CLOCKS,
+					  "arm/mvebu/sync_clocks:online",
+					  armada_xp_sync_secondary_clk, NULL);
+	}
+
+	/*
+	 * In order to boot the secondary CPUs we need to ensure
+	 * the bootROM is mapped at the correct address.
+	 */
+	node = of_find_compatible_node(NULL, NULL, "marvell,bootrom");
+	if (!node)
+		panic("Cannot find 'marvell,bootrom' compatible node");
+
+	err = of_address_to_resource(node, 0, &res);
+	of_node_put(node);
+	if (err < 0)
+		panic("Cannot get 'bootrom' node address");
+
+	if (res.start != AXP_BOOTROM_BASE ||
+	    resource_size(&res) != AXP_BOOTROM_SIZE)
+		panic("The address for the BootROM is incorrect");
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void armada_xp_cpu_die(unsigned int cpu)
+{
+	/*
+	 * CPU hotplug is implemented by putting offline CPUs into the
+	 * deep idle sleep state.
+	 */
+	armada_370_xp_pmsu_idle_enter(true);
+}
+
+/*
+ * We need a dummy function, so that platform_can_cpu_hotplug() knows
+ * we support CPU hotplug. However, the function does not need to do
+ * anything, because CPUs going offline can enter the deep idle state
+ * by themselves, without any help from a still alive CPU.
+ */
+static int armada_xp_cpu_kill(unsigned int cpu)
+{
+	return 1;
+}
+#endif
+
+const struct smp_operations armada_xp_smp_ops __initconst = {
+	.smp_init_cpus		= armada_xp_smp_init_cpus,
+	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
+	.smp_boot_secondary	= armada_xp_boot_secondary,
+	.smp_secondary_init     = armada_xp_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_xp_cpu_die,
+	.cpu_kill               = armada_xp_cpu_kill,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(armada_xp_smp, "marvell,armada-xp-smp",
+		      &armada_xp_smp_ops);
+
+#define MV98DX3236_CPU_RESUME_CTRL_REG 0x08
+#define MV98DX3236_CPU_RESUME_ADDR_REG 0x04
+
+static const struct of_device_id of_mv98dx3236_resume_table[] = {
+	{
+		.compatible = "marvell,98dx3336-resume-ctrl",
+	},
+	{ /* end of list */ },
+};
+
+static int mv98dx3236_resume_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
+{
+	struct device_node *np;
+	void __iomem *base;
+	WARN_ON(hw_cpu != 1);
+
+	np = of_find_matching_node(NULL, of_mv98dx3236_resume_table);
+	if (!np)
+		return -ENODEV;
+
+	base = of_io_request_and_map(np, 0, of_node_full_name(np));
+	of_node_put(np);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	writel(0, base + MV98DX3236_CPU_RESUME_CTRL_REG);
+	writel(__pa_symbol(boot_addr), base + MV98DX3236_CPU_RESUME_ADDR_REG);
+
+	iounmap(base);
+
+	return 0;
+}
+
+static int mv98dx3236_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	int ret, hw_cpu;
+
+	hw_cpu = cpu_logical_map(cpu);
+	mv98dx3236_resume_set_cpu_boot_addr(hw_cpu,
+					    armada_xp_secondary_startup);
+
+	/*
+	 * This is needed to wake up CPUs in the offline state after
+	 * using CPU hotplug.
+	 */
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+	/*
+	 * This is needed to take secondary CPUs out of reset on the
+	 * initial boot.
+	 */
+	ret = mvebu_cpu_reset_deassert(hw_cpu);
+	if (ret) {
+		pr_warn("unable to boot CPU: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct smp_operations mv98dx3236_smp_ops __initconst = {
+	.smp_init_cpus		= armada_xp_smp_init_cpus,
+	.smp_prepare_cpus	= armada_xp_smp_prepare_cpus,
+	.smp_boot_secondary	= mv98dx3236_boot_secondary,
+	.smp_secondary_init     = armada_xp_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_die		= armada_xp_cpu_die,
+	.cpu_kill               = armada_xp_cpu_kill,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(mv98dx3236_smp, "marvell,98dx3236-smp",
+		      &mv98dx3236_smp_ops);
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
new file mode 100644
index 000000000..070552511
--- /dev/null
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -0,0 +1,157 @@
+/*
+ * Board-level suspend/resume support.
+ *
+ * Copyright (C) 2014-2015 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include "common.h"
+
+#define ARMADA_PIC_NR_GPIOS 3
+
+static void __iomem *gpio_ctrl;
+static int pic_gpios[ARMADA_PIC_NR_GPIOS];
+static int pic_raw_gpios[ARMADA_PIC_NR_GPIOS];
+
+static void mvebu_armada_pm_enter(void __iomem *sdram_reg, u32 srcmd)
+{
+	u32 reg, ackcmd;
+	int i;
+
+	/* Put 001 as value on the GPIOs */
+	reg = readl(gpio_ctrl);
+	for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++)
+		reg &= ~BIT(pic_raw_gpios[i]);
+	reg |= BIT(pic_raw_gpios[0]);
+	writel(reg, gpio_ctrl);
+
+	/* Prepare writing 111 to the GPIOs */
+	ackcmd = readl(gpio_ctrl);
+	for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++)
+		ackcmd |= BIT(pic_raw_gpios[i]);
+
+	srcmd = cpu_to_le32(srcmd);
+	ackcmd = cpu_to_le32(ackcmd);
+
+	/*
+	 * Wait a while, the PIC needs quite a bit of time between the
+	 * two GPIO commands.
+	 */
+	mdelay(3000);
+
+	asm volatile (
+		/* Align to a cache line */
+		".balign 32\n\t"
+
+		/* Enter self refresh */
+		"str %[srcmd], [%[sdram_reg]]\n\t"
+
+		/*
+		 * Wait 100 cycles for DDR to enter self refresh, by
+		 * doing 50 times two instructions.
+		 */
+		"mov r1, #50\n\t"
+		"1: subs r1, r1, #1\n\t"
+		"bne 1b\n\t"
+
+		/* Issue the command ACK */
+		"str %[ackcmd], [%[gpio_ctrl]]\n\t"
+
+		/* Trap the processor */
+		"b .\n\t"
+		: : [srcmd] "r" (srcmd), [sdram_reg] "r" (sdram_reg),
+		  [ackcmd] "r" (ackcmd), [gpio_ctrl] "r" (gpio_ctrl) : "r1");
+}
+
+static int __init mvebu_armada_pm_init(void)
+{
+	struct device_node *np;
+	struct device_node *gpio_ctrl_np = NULL;
+	int ret = 0, i;
+
+	if (!of_machine_is_compatible("marvell,axp-gp"))
+		return -ENODEV;
+
+	np = of_find_node_by_name(NULL, "pm_pic");
+	if (!np)
+		return -ENODEV;
+
+	for (i = 0; i < ARMADA_PIC_NR_GPIOS; i++) {
+		char *name;
+		struct of_phandle_args args;
+
+		pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i);
+		if (pic_gpios[i] < 0) {
+			ret = -ENODEV;
+			goto out;
+		}
+
+		name = kasprintf(GFP_KERNEL, "pic-pin%d", i);
+		if (!name) {
+			ret = -ENOMEM;
+			goto out;
+		}
+
+		ret = gpio_request(pic_gpios[i], name);
+		if (ret < 0) {
+			kfree(name);
+			goto out;
+		}
+
+		ret = gpio_direction_output(pic_gpios[i], 0);
+		if (ret < 0) {
+			gpio_free(pic_gpios[i]);
+			kfree(name);
+			goto out;
+		}
+
+		ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2,
+						       i, &args);
+		if (ret < 0) {
+			gpio_free(pic_gpios[i]);
+			kfree(name);
+			goto out;
+		}
+
+		if (gpio_ctrl_np)
+			of_node_put(gpio_ctrl_np);
+		gpio_ctrl_np = args.np;
+		pic_raw_gpios[i] = args.args[0];
+	}
+
+	gpio_ctrl = of_iomap(gpio_ctrl_np, 0);
+	if (!gpio_ctrl) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mvebu_pm_suspend_init(mvebu_armada_pm_enter);
+
+out:
+	of_node_put(np);
+	of_node_put(gpio_ctrl_np);
+	return ret;
+}
+
+/*
+ * Registering the mvebu_board_pm_enter callback must be done before
+ * the platform_suspend_ops will be registered. In the same time we
+ * also need to have the gpio devices registered. That's why we use a
+ * device_initcall_sync which is called after all the device_initcall
+ * (used by the gpio device) but before the late_initcall (used to
+ * register the platform_suspend_ops)
+ */
+device_initcall_sync(mvebu_armada_pm_init);
diff --git a/arch/arm/mach-mvebu/pm.c b/arch/arm/mach-mvebu/pm.c
new file mode 100644
index 000000000..c487be61d
--- /dev/null
+++ b/arch/arm/mach-mvebu/pm.c
@@ -0,0 +1,270 @@
+/*
+ * Suspend/resume support. Currently supporting Armada XP only.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mbus.h>
+#include <linux/of_address.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/outercache.h>
+#include <asm/suspend.h>
+
+#include "coherency.h"
+#include "common.h"
+#include "pmsu.h"
+
+#define SDRAM_CONFIG_OFFS                  0x0
+#define  SDRAM_CONFIG_SR_MODE_BIT          BIT(24)
+#define SDRAM_OPERATION_OFFS               0x18
+#define  SDRAM_OPERATION_SELF_REFRESH      0x7
+#define SDRAM_DLB_EVICTION_OFFS            0x30c
+#define  SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff
+
+static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd);
+static void __iomem *sdram_ctrl;
+
+static int mvebu_pm_powerdown(unsigned long data)
+{
+	u32 reg, srcmd;
+
+	flush_cache_all();
+	outer_flush_all();
+
+	/*
+	 * Issue a Data Synchronization Barrier instruction to ensure
+	 * that all state saving has been completed.
+	 */
+	dsb();
+
+	/* Flush the DLB and wait ~7 usec */
+	reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
+	reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK;
+	writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
+
+	udelay(7);
+
+	/* Set DRAM in battery backup mode */
+	reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS);
+	reg &= ~SDRAM_CONFIG_SR_MODE_BIT;
+	writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS);
+
+	/* Prepare to go to self-refresh */
+
+	srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS);
+	srcmd &= ~0x1F;
+	srcmd |= SDRAM_OPERATION_SELF_REFRESH;
+
+	mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd);
+
+	return 0;
+}
+
+#define BOOT_INFO_ADDR      0x3000
+#define BOOT_MAGIC_WORD	    0xdeadb002
+#define BOOT_MAGIC_LIST_END 0xffffffff
+
+/*
+ * Those registers are accessed before switching the internal register
+ * base, which is why we hardcode the 0xd0000000 base address, the one
+ * used by the SoC out of reset.
+ */
+#define MBUS_WINDOW_12_CTRL       0xd00200b0
+#define MBUS_INTERNAL_REG_ADDRESS 0xd0020080
+
+#define SDRAM_WIN_BASE_REG(x)	(0x20180 + (0x8*x))
+#define SDRAM_WIN_CTRL_REG(x)	(0x20184 + (0x8*x))
+
+static phys_addr_t mvebu_internal_reg_base(void)
+{
+	struct device_node *np;
+	__be32 in_addr[2];
+
+	np = of_find_node_by_name(NULL, "internal-regs");
+	BUG_ON(!np);
+
+	/*
+	 * Ask the DT what is the internal register address on this
+	 * platform. In the mvebu-mbus DT binding, 0xf0010000
+	 * corresponds to the internal register window.
+	 */
+	in_addr[0] = cpu_to_be32(0xf0010000);
+	in_addr[1] = 0x0;
+
+	return of_translate_address(np, in_addr);
+}
+
+static void mvebu_pm_store_armadaxp_bootinfo(u32 *store_addr)
+{
+	phys_addr_t resume_pc;
+
+	resume_pc = __pa_symbol(armada_370_xp_cpu_resume);
+
+	/*
+	 * The bootloader expects the first two words to be a magic
+	 * value (BOOT_MAGIC_WORD), followed by the address of the
+	 * resume code to jump to. Then, it expects a sequence of
+	 * (address, value) pairs, which can be used to restore the
+	 * value of certain registers. This sequence must end with the
+	 * BOOT_MAGIC_LIST_END magic value.
+	 */
+
+	writel(BOOT_MAGIC_WORD, store_addr++);
+	writel(resume_pc, store_addr++);
+
+	/*
+	 * Some platforms remap their internal register base address
+	 * to 0xf1000000. However, out of reset, window 12 starts at
+	 * 0xf0000000 and ends at 0xf7ffffff, which would overlap with
+	 * the internal registers. Therefore, disable window 12.
+	 */
+	writel(MBUS_WINDOW_12_CTRL, store_addr++);
+	writel(0x0, store_addr++);
+
+	/*
+	 * Set the internal register base address to the value
+	 * expected by Linux, as read from the Device Tree.
+	 */
+	writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++);
+	writel(mvebu_internal_reg_base(), store_addr++);
+
+	/*
+	 * Ask the mvebu-mbus driver to store the SDRAM window
+	 * configuration, which has to be restored by the bootloader
+	 * before re-entering the kernel on resume.
+	 */
+	store_addr += mvebu_mbus_save_cpu_target(store_addr);
+
+	writel(BOOT_MAGIC_LIST_END, store_addr);
+}
+
+static int mvebu_pm_store_bootinfo(void)
+{
+	u32 *store_addr;
+
+	store_addr = phys_to_virt(BOOT_INFO_ADDR);
+
+	if (of_machine_is_compatible("marvell,armadaxp"))
+		mvebu_pm_store_armadaxp_bootinfo(store_addr);
+	else
+		return -ENODEV;
+
+	return 0;
+}
+
+static int mvebu_enter_suspend(void)
+{
+	int ret;
+
+	ret = mvebu_pm_store_bootinfo();
+	if (ret)
+		return ret;
+
+	cpu_pm_enter();
+
+	cpu_suspend(0, mvebu_pm_powerdown);
+
+	outer_resume();
+
+	mvebu_v7_pmsu_idle_exit();
+
+	set_cpu_coherent();
+
+	cpu_pm_exit();
+	return 0;
+}
+
+static int mvebu_pm_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_STANDBY:
+		cpu_do_idle();
+		break;
+	case PM_SUSPEND_MEM:
+		pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n");
+		return mvebu_enter_suspend();
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int mvebu_pm_valid(suspend_state_t state)
+{
+	if (state == PM_SUSPEND_STANDBY)
+		return 1;
+
+	if (state == PM_SUSPEND_MEM && mvebu_board_pm_enter != NULL)
+		return 1;
+
+	return 0;
+}
+
+static const struct platform_suspend_ops mvebu_pm_ops = {
+	.enter = mvebu_pm_enter,
+	.valid = mvebu_pm_valid,
+};
+
+static int __init mvebu_pm_init(void)
+{
+	if (!of_machine_is_compatible("marvell,armadaxp") &&
+	    !of_machine_is_compatible("marvell,armada370") &&
+	    !of_machine_is_compatible("marvell,armada380") &&
+	    !of_machine_is_compatible("marvell,armada390"))
+		return -ENODEV;
+
+	suspend_set_ops(&mvebu_pm_ops);
+
+	return 0;
+}
+
+
+late_initcall(mvebu_pm_init);
+
+int __init mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg,
+							u32 srcmd))
+{
+	struct device_node *np;
+	struct resource res;
+
+	np = of_find_compatible_node(NULL, NULL,
+				     "marvell,armada-xp-sdram-controller");
+	if (!np)
+		return -ENODEV;
+
+	if (of_address_to_resource(np, 0, &res)) {
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	if (!request_mem_region(res.start, resource_size(&res),
+				np->full_name)) {
+		of_node_put(np);
+		return -EBUSY;
+	}
+
+	sdram_ctrl = ioremap(res.start, resource_size(&res));
+	if (!sdram_ctrl) {
+		release_mem_region(res.start, resource_size(&res));
+		of_node_put(np);
+		return -ENOMEM;
+	}
+
+	of_node_put(np);
+
+	mvebu_board_pm_enter = board_pm_enter;
+
+	return 0;
+}
diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
new file mode 100644
index 000000000..73d5d72df
--- /dev/null
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -0,0 +1,609 @@
+/*
+ * Power Management Service Unit(PMSU) support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Yehuda Yitschak <yehuday@marvell.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada 370 and Armada XP SOCs have a power management service
+ * unit which is responsible for powering down and waking up CPUs and
+ * other SOC units
+ */
+
+#define pr_fmt(fmt) "mvebu-pmsu: " fmt
+
+#include <linux/clk.h>
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mbus.h>
+#include <linux/mvebu-pmsu.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/slab.h>
+#include <linux/smp.h>
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
+#include "common.h"
+#include "pmsu.h"
+
+#define PMSU_BASE_OFFSET    0x100
+#define PMSU_REG_SIZE	    0x1000
+
+/* PMSU MP registers */
+#define PMSU_CONTROL_AND_CONFIG(cpu)	    ((cpu * 0x100) + 0x104)
+#define PMSU_CONTROL_AND_CONFIG_DFS_REQ		BIT(18)
+#define PMSU_CONTROL_AND_CONFIG_PWDDN_REQ	BIT(16)
+#define PMSU_CONTROL_AND_CONFIG_L2_PWDDN	BIT(20)
+
+#define PMSU_CPU_POWER_DOWN_CONTROL(cpu)    ((cpu * 0x100) + 0x108)
+
+#define PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP	BIT(0)
+
+#define PMSU_STATUS_AND_MASK(cpu)	    ((cpu * 0x100) + 0x10c)
+#define PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT	BIT(16)
+#define PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT	BIT(17)
+#define PMSU_STATUS_AND_MASK_IRQ_WAKEUP		BIT(20)
+#define PMSU_STATUS_AND_MASK_FIQ_WAKEUP		BIT(21)
+#define PMSU_STATUS_AND_MASK_DBG_WAKEUP		BIT(22)
+#define PMSU_STATUS_AND_MASK_IRQ_MASK		BIT(24)
+#define PMSU_STATUS_AND_MASK_FIQ_MASK		BIT(25)
+
+#define PMSU_EVENT_STATUS_AND_MASK(cpu)     ((cpu * 0x100) + 0x120)
+#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE        BIT(1)
+#define PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK   BIT(17)
+
+#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) ((cpu * 0x100) + 0x124)
+
+/* PMSU fabric registers */
+#define L2C_NFABRIC_PM_CTL		    0x4
+#define L2C_NFABRIC_PM_CTL_PWR_DOWN		BIT(20)
+
+/* PMSU delay registers */
+#define PMSU_POWERDOWN_DELAY		    0xF04
+#define PMSU_POWERDOWN_DELAY_PMU		BIT(1)
+#define PMSU_POWERDOWN_DELAY_MASK		0xFFFE
+#define PMSU_DFLT_ARMADA38X_DELAY	        0x64
+
+/* CA9 MPcore SoC Control registers */
+
+#define MPCORE_RESET_CTL		    0x64
+#define MPCORE_RESET_CTL_L2			BIT(0)
+#define MPCORE_RESET_CTL_DEBUG			BIT(16)
+
+#define SRAM_PHYS_BASE  0xFFFF0000
+#define BOOTROM_BASE    0xFFF00000
+#define BOOTROM_SIZE    0x100000
+
+#define ARMADA_370_CRYPT0_ENG_TARGET   0x9
+#define ARMADA_370_CRYPT0_ENG_ATTR     0x1
+
+extern void ll_disable_coherency(void);
+extern void ll_enable_coherency(void);
+
+extern void armada_370_xp_cpu_resume(void);
+extern void armada_38x_cpu_resume(void);
+
+static phys_addr_t pmsu_mp_phys_base;
+static void __iomem *pmsu_mp_base;
+
+static void *mvebu_cpu_resume;
+
+static const struct of_device_id of_pmsu_table[] = {
+	{ .compatible = "marvell,armada-370-pmsu", },
+	{ .compatible = "marvell,armada-370-xp-pmsu", },
+	{ .compatible = "marvell,armada-380-pmsu", },
+	{ /* end of list */ },
+};
+
+void mvebu_pmsu_set_cpu_boot_addr(int hw_cpu, void *boot_addr)
+{
+	writel(__pa_symbol(boot_addr), pmsu_mp_base +
+		PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+}
+
+extern unsigned char mvebu_boot_wa_start[];
+extern unsigned char mvebu_boot_wa_end[];
+
+/*
+ * This function sets up the boot address workaround needed for SMP
+ * boot on Armada 375 Z1 and cpuidle on Armada 370. It unmaps the
+ * BootROM Mbus window, and instead remaps a crypto SRAM into which a
+ * custom piece of code is copied to replace the problematic BootROM.
+ */
+int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target,
+			     unsigned int crypto_eng_attribute,
+			     phys_addr_t resume_addr_reg)
+{
+	void __iomem *sram_virt_base;
+	u32 code_len = mvebu_boot_wa_end - mvebu_boot_wa_start;
+
+	mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE);
+	mvebu_mbus_add_window_by_id(crypto_eng_target, crypto_eng_attribute,
+				    SRAM_PHYS_BASE, SZ_64K);
+
+	sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K);
+	if (!sram_virt_base) {
+		pr_err("Unable to map SRAM to setup the boot address WA\n");
+		return -ENOMEM;
+	}
+
+	memcpy(sram_virt_base, &mvebu_boot_wa_start, code_len);
+
+	/*
+	 * The last word of the code copied in SRAM must contain the
+	 * physical base address of the PMSU register. We
+	 * intentionally store this address in the native endianness
+	 * of the system.
+	 */
+	__raw_writel((unsigned long)resume_addr_reg,
+		     sram_virt_base + code_len - 4);
+
+	iounmap(sram_virt_base);
+
+	return 0;
+}
+
+static int __init mvebu_v7_pmsu_init(void)
+{
+	struct device_node *np;
+	struct resource res;
+	int ret = 0;
+
+	np = of_find_matching_node(NULL, of_pmsu_table);
+	if (!np)
+		return 0;
+
+	pr_info("Initializing Power Management Service Unit\n");
+
+	if (of_address_to_resource(np, 0, &res)) {
+		pr_err("unable to get resource\n");
+		ret = -ENOENT;
+		goto out;
+	}
+
+	if (of_device_is_compatible(np, "marvell,armada-370-xp-pmsu")) {
+		pr_warn(FW_WARN "deprecated pmsu binding\n");
+		res.start = res.start - PMSU_BASE_OFFSET;
+		res.end = res.start + PMSU_REG_SIZE - 1;
+	}
+
+	if (!request_mem_region(res.start, resource_size(&res),
+				np->full_name)) {
+		pr_err("unable to request region\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	pmsu_mp_phys_base = res.start;
+
+	pmsu_mp_base = ioremap(res.start, resource_size(&res));
+	if (!pmsu_mp_base) {
+		pr_err("unable to map registers\n");
+		release_mem_region(res.start, resource_size(&res));
+		ret = -ENOMEM;
+		goto out;
+	}
+
+ out:
+	of_node_put(np);
+	return ret;
+}
+
+static void mvebu_v7_pmsu_enable_l2_powerdown_onidle(void)
+{
+	u32 reg;
+
+	if (pmsu_mp_base == NULL)
+		return;
+
+	/* Enable L2 & Fabric powerdown in Deep-Idle mode - Fabric */
+	reg = readl(pmsu_mp_base + L2C_NFABRIC_PM_CTL);
+	reg |= L2C_NFABRIC_PM_CTL_PWR_DOWN;
+	writel(reg, pmsu_mp_base + L2C_NFABRIC_PM_CTL);
+}
+
+enum pmsu_idle_prepare_flags {
+	PMSU_PREPARE_NORMAL = 0,
+	PMSU_PREPARE_DEEP_IDLE = BIT(0),
+	PMSU_PREPARE_SNOOP_DISABLE = BIT(1),
+};
+
+/* No locking is needed because we only access per-CPU registers */
+static int mvebu_v7_pmsu_idle_prepare(unsigned long flags)
+{
+	unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+	u32 reg;
+
+	if (pmsu_mp_base == NULL)
+		return -EINVAL;
+
+	/*
+	 * Adjust the PMSU configuration to wait for WFI signal, enable
+	 * IRQ and FIQ as wakeup events, set wait for snoop queue empty
+	 * indication and mask IRQ and FIQ from CPU
+	 */
+	reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+	reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT    |
+	       PMSU_STATUS_AND_MASK_IRQ_WAKEUP       |
+	       PMSU_STATUS_AND_MASK_FIQ_WAKEUP       |
+	       PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT |
+	       PMSU_STATUS_AND_MASK_IRQ_MASK         |
+	       PMSU_STATUS_AND_MASK_FIQ_MASK;
+	writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+
+	reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+	/* ask HW to power down the L2 Cache if needed */
+	if (flags & PMSU_PREPARE_DEEP_IDLE)
+		reg |= PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
+
+	/* request power down */
+	reg |= PMSU_CONTROL_AND_CONFIG_PWDDN_REQ;
+	writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+
+	if (flags & PMSU_PREPARE_SNOOP_DISABLE) {
+		/* Disable snoop disable by HW - SW is taking care of it */
+		reg = readl(pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
+		reg |= PMSU_CPU_POWER_DOWN_DIS_SNP_Q_SKIP;
+		writel(reg, pmsu_mp_base + PMSU_CPU_POWER_DOWN_CONTROL(hw_cpu));
+	}
+
+	return 0;
+}
+
+int armada_370_xp_pmsu_idle_enter(unsigned long deepidle)
+{
+	unsigned long flags = PMSU_PREPARE_SNOOP_DISABLE;
+	int ret;
+
+	if (deepidle)
+		flags |= PMSU_PREPARE_DEEP_IDLE;
+
+	ret = mvebu_v7_pmsu_idle_prepare(flags);
+	if (ret)
+		return ret;
+
+	v7_exit_coherency_flush(all);
+
+	ll_disable_coherency();
+
+	dsb();
+
+	wfi();
+
+	/* If we are here, wfi failed. As processors run out of
+	 * coherency for some time, tlbs might be stale, so flush them
+	 */
+	local_flush_tlb_all();
+
+	ll_enable_coherency();
+
+	/* Test the CR_C bit and set it if it was cleared */
+	asm volatile(
+	"mrc	p15, 0, r0, c1, c0, 0 \n\t"
+	"tst	r0, %0 \n\t"
+	"orreq	r0, r0, #(1 << 2) \n\t"
+	"mcreq	p15, 0, r0, c1, c0, 0 \n\t"
+	"isb	"
+	: : "Ir" (CR_C) : "r0");
+
+	pr_debug("Failed to suspend the system\n");
+
+	return 0;
+}
+
+static int armada_370_xp_cpu_suspend(unsigned long deepidle)
+{
+	return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter);
+}
+
+int armada_38x_do_cpu_suspend(unsigned long deepidle)
+{
+	unsigned long flags = 0;
+
+	if (deepidle)
+		flags |= PMSU_PREPARE_DEEP_IDLE;
+
+	mvebu_v7_pmsu_idle_prepare(flags);
+	/*
+	 * Already flushed cache, but do it again as the outer cache
+	 * functions dirty the cache with spinlocks
+	 */
+	v7_exit_coherency_flush(louis);
+
+	scu_power_mode(mvebu_get_scu_base(), SCU_PM_POWEROFF);
+
+	cpu_do_idle();
+
+	return 1;
+}
+
+static int armada_38x_cpu_suspend(unsigned long deepidle)
+{
+	return cpu_suspend(false, armada_38x_do_cpu_suspend);
+}
+
+/* No locking is needed because we only access per-CPU registers */
+void mvebu_v7_pmsu_idle_exit(void)
+{
+	unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+	u32 reg;
+
+	if (pmsu_mp_base == NULL)
+		return;
+	/* cancel ask HW to power down the L2 Cache if possible */
+	reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+	reg &= ~PMSU_CONTROL_AND_CONFIG_L2_PWDDN;
+	writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(hw_cpu));
+
+	/* cancel Enable wakeup events and mask interrupts */
+	reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+	reg &= ~(PMSU_STATUS_AND_MASK_IRQ_WAKEUP | PMSU_STATUS_AND_MASK_FIQ_WAKEUP);
+	reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
+	reg &= ~PMSU_STATUS_AND_MASK_SNP_Q_EMPTY_WAIT;
+	reg &= ~(PMSU_STATUS_AND_MASK_IRQ_MASK | PMSU_STATUS_AND_MASK_FIQ_MASK);
+	writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(hw_cpu));
+}
+
+static int mvebu_v7_cpu_pm_notify(struct notifier_block *self,
+				    unsigned long action, void *hcpu)
+{
+	if (action == CPU_PM_ENTER) {
+		unsigned int hw_cpu = cpu_logical_map(smp_processor_id());
+		mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cpu_resume);
+	} else if (action == CPU_PM_EXIT) {
+		mvebu_v7_pmsu_idle_exit();
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mvebu_v7_cpu_pm_notifier = {
+	.notifier_call = mvebu_v7_cpu_pm_notify,
+};
+
+static struct platform_device mvebu_v7_cpuidle_device;
+
+static int broken_idle(struct device_node *np)
+{
+	if (of_property_read_bool(np, "broken-idle")) {
+		pr_warn("CPU idle is currently broken: disabling\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+static __init int armada_370_cpuidle_init(void)
+{
+	struct device_node *np;
+	phys_addr_t redirect_reg;
+
+	np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
+	if (!np)
+		return -ENODEV;
+
+	if (broken_idle(np))
+		goto end;
+
+	/*
+	 * On Armada 370, there is "a slow exit process from the deep
+	 * idle state due to heavy L1/L2 cache cleanup operations
+	 * performed by the BootROM software". To avoid this, we
+	 * replace the restart code of the bootrom by a a simple jump
+	 * to the boot address. Then the code located at this boot
+	 * address will take care of the initialization.
+	 */
+	redirect_reg = pmsu_mp_phys_base + PMSU_BOOT_ADDR_REDIRECT_OFFSET(0);
+	mvebu_setup_boot_addr_wa(ARMADA_370_CRYPT0_ENG_TARGET,
+				 ARMADA_370_CRYPT0_ENG_ATTR,
+				 redirect_reg);
+
+	mvebu_cpu_resume = armada_370_xp_cpu_resume;
+	mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
+	mvebu_v7_cpuidle_device.name = "cpuidle-armada-370";
+
+end:
+	of_node_put(np);
+	return 0;
+}
+
+static __init int armada_38x_cpuidle_init(void)
+{
+	struct device_node *np;
+	void __iomem *mpsoc_base;
+	u32 reg;
+
+	pr_warn("CPU idle is currently broken on Armada 38x: disabling\n");
+	return 0;
+
+	np = of_find_compatible_node(NULL, NULL,
+				     "marvell,armada-380-coherency-fabric");
+	if (!np)
+		return -ENODEV;
+
+	if (broken_idle(np))
+		goto end;
+
+	of_node_put(np);
+
+	np = of_find_compatible_node(NULL, NULL,
+				     "marvell,armada-380-mpcore-soc-ctrl");
+	if (!np)
+		return -ENODEV;
+	mpsoc_base = of_iomap(np, 0);
+	BUG_ON(!mpsoc_base);
+
+	/* Set up reset mask when powering down the cpus */
+	reg = readl(mpsoc_base + MPCORE_RESET_CTL);
+	reg |= MPCORE_RESET_CTL_L2;
+	reg |= MPCORE_RESET_CTL_DEBUG;
+	writel(reg, mpsoc_base + MPCORE_RESET_CTL);
+	iounmap(mpsoc_base);
+
+	/* Set up delay */
+	reg = readl(pmsu_mp_base + PMSU_POWERDOWN_DELAY);
+	reg &= ~PMSU_POWERDOWN_DELAY_MASK;
+	reg |= PMSU_DFLT_ARMADA38X_DELAY;
+	reg |= PMSU_POWERDOWN_DELAY_PMU;
+	writel(reg, pmsu_mp_base + PMSU_POWERDOWN_DELAY);
+
+	mvebu_cpu_resume = armada_38x_cpu_resume;
+	mvebu_v7_cpuidle_device.dev.platform_data = armada_38x_cpu_suspend;
+	mvebu_v7_cpuidle_device.name = "cpuidle-armada-38x";
+
+end:
+	of_node_put(np);
+	return 0;
+}
+
+static __init int armada_xp_cpuidle_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "marvell,coherency-fabric");
+	if (!np)
+		return -ENODEV;
+
+	if (broken_idle(np))
+		goto end;
+
+	mvebu_cpu_resume = armada_370_xp_cpu_resume;
+	mvebu_v7_cpuidle_device.dev.platform_data = armada_370_xp_cpu_suspend;
+	mvebu_v7_cpuidle_device.name = "cpuidle-armada-xp";
+
+end:
+	of_node_put(np);
+	return 0;
+}
+
+static int __init mvebu_v7_cpu_pm_init(void)
+{
+	struct device_node *np;
+	int ret;
+
+	np = of_find_matching_node(NULL, of_pmsu_table);
+	if (!np)
+		return 0;
+	of_node_put(np);
+
+	/*
+	 * Currently the CPU idle support for Armada 38x is broken, as
+	 * the CPU hotplug uses some of the CPU idle functions it is
+	 * broken too, so let's disable it
+	 */
+	if (of_machine_is_compatible("marvell,armada380")) {
+		cpu_hotplug_disable();
+		pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling\n");
+	}
+
+	if (of_machine_is_compatible("marvell,armadaxp"))
+		ret = armada_xp_cpuidle_init();
+	else if (of_machine_is_compatible("marvell,armada370"))
+		ret = armada_370_cpuidle_init();
+	else if (of_machine_is_compatible("marvell,armada380"))
+		ret = armada_38x_cpuidle_init();
+	else
+		return 0;
+
+	if (ret)
+		return ret;
+
+	mvebu_v7_pmsu_enable_l2_powerdown_onidle();
+	if (mvebu_v7_cpuidle_device.name)
+		platform_device_register(&mvebu_v7_cpuidle_device);
+	cpu_pm_register_notifier(&mvebu_v7_cpu_pm_notifier);
+
+	return 0;
+}
+
+arch_initcall(mvebu_v7_cpu_pm_init);
+early_initcall(mvebu_v7_pmsu_init);
+
+static void mvebu_pmsu_dfs_request_local(void *data)
+{
+	u32 reg;
+	u32 cpu = smp_processor_id();
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	/* Prepare to enter idle */
+	reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
+	reg |= PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT |
+	       PMSU_STATUS_AND_MASK_IRQ_MASK     |
+	       PMSU_STATUS_AND_MASK_FIQ_MASK;
+	writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
+
+	/* Request the DFS transition */
+	reg = readl(pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu));
+	reg |= PMSU_CONTROL_AND_CONFIG_DFS_REQ;
+	writel(reg, pmsu_mp_base + PMSU_CONTROL_AND_CONFIG(cpu));
+
+	/* The fact of entering idle will trigger the DFS transition */
+	wfi();
+
+	/*
+	 * We're back from idle, the DFS transition has completed,
+	 * clear the idle wait indication.
+	 */
+	reg = readl(pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
+	reg &= ~PMSU_STATUS_AND_MASK_CPU_IDLE_WAIT;
+	writel(reg, pmsu_mp_base + PMSU_STATUS_AND_MASK(cpu));
+
+	local_irq_restore(flags);
+}
+
+int mvebu_pmsu_dfs_request(int cpu)
+{
+	unsigned long timeout;
+	int hwcpu = cpu_logical_map(cpu);
+	u32 reg;
+
+	/* Clear any previous DFS DONE event */
+	reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
+	reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE;
+	writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
+
+	/* Mask the DFS done interrupt, since we are going to poll */
+	reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
+	reg |= PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK;
+	writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
+
+	/* Trigger the DFS on the appropriate CPU */
+	smp_call_function_single(cpu, mvebu_pmsu_dfs_request_local,
+				 NULL, false);
+
+	/* Poll until the DFS done event is generated */
+	timeout = jiffies + HZ;
+	while (time_before(jiffies, timeout)) {
+		reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
+		if (reg & PMSU_EVENT_STATUS_AND_MASK_DFS_DONE)
+			break;
+		udelay(10);
+	}
+
+	if (time_after(jiffies, timeout))
+		return -ETIME;
+
+	/* Restore the DFS mask to its original state */
+	reg = readl(pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
+	reg &= ~PMSU_EVENT_STATUS_AND_MASK_DFS_DONE_MASK;
+	writel(reg, pmsu_mp_base + PMSU_EVENT_STATUS_AND_MASK(hwcpu));
+
+	return 0;
+}
diff --git a/arch/arm/mach-mvebu/pmsu.h b/arch/arm/mach-mvebu/pmsu.h
new file mode 100644
index 000000000..ea79269c2
--- /dev/null
+++ b/arch/arm/mach-mvebu/pmsu.h
@@ -0,0 +1,24 @@
+/*
+ * Power Management Service Unit (PMSU) support for Armada 370/XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MACH_MVEBU_PMSU_H
+#define __MACH_MVEBU_PMSU_H
+
+int armada_xp_boot_cpu(unsigned int cpu_id, void *phys_addr);
+int mvebu_setup_boot_addr_wa(unsigned int crypto_eng_target,
+                             unsigned int crypto_eng_attribute,
+                             phys_addr_t resume_addr_reg);
+
+void mvebu_v7_pmsu_idle_exit(void);
+void armada_370_xp_cpu_resume(void);
+
+int armada_370_xp_pmsu_idle_enter(unsigned long deepidle);
+int armada_38x_do_cpu_suspend(unsigned long deepidle);
+#endif	/* __MACH_370_XP_PMSU_H */
diff --git a/arch/arm/mach-mvebu/pmsu_ll.S b/arch/arm/mach-mvebu/pmsu_ll.S
new file mode 100644
index 000000000..7aae9a25c
--- /dev/null
+++ b/arch/arm/mach-mvebu/pmsu_ll.S
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Gregory Clement <gregory.clement@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+
+ENTRY(armada_38x_scu_power_up)
+	mrc     p15, 4, r1, c15, c0	@ get SCU base address
+	orr	r1, r1, #0x8		@ SCU CPU Power Status Register
+	mrc	p15, 0, r0, cr0, cr0, 5	@ get the CPU ID
+	and	r0, r0, #15
+	add	r1, r1, r0
+	mov	r0, #0x0
+	strb	r0, [r1]		@ switch SCU power state to Normal mode
+	ret	lr
+ENDPROC(armada_38x_scu_power_up)
+
+/*
+ * This is the entry point through which CPUs exiting cpuidle deep
+ * idle state are going.
+ */
+ENTRY(armada_370_xp_cpu_resume)
+ARM_BE8(setend	be )			@ go BE8 if entered LE
+	/*
+	 * Disable the MMU that might have been enabled in BootROM if
+	 * this code is used in the resume path of a suspend/resume
+	 * cycle.
+	 */
+	mrc	p15, 0, r1, c1, c0, 0
+	bic	r1, #1
+	mcr	p15, 0, r1, c1, c0, 0
+	bl	ll_add_cpu_to_smp_group
+	bl	ll_enable_coherency
+	b	cpu_resume
+ENDPROC(armada_370_xp_cpu_resume)
+
+ENTRY(armada_38x_cpu_resume)
+	/* do we need it for Armada 38x*/
+ARM_BE8(setend	be )			@ go BE8 if entered LE
+	bl	v7_invalidate_l1
+	bl	armada_38x_scu_power_up
+	b	cpu_resume
+ENDPROC(armada_38x_cpu_resume)
+
+.global mvebu_boot_wa_start
+.global mvebu_boot_wa_end
+
+/* The following code will be executed from SRAM */
+ENTRY(mvebu_boot_wa_start)
+ARM_BE8(setend	be)
+	adr	r0, 1f
+	ldr	r0, [r0]		@ load the address of the
+					@ resume register
+	ldr	r0, [r0]		@ load the value in the
+					@ resume register
+ARM_BE8(rev	r0, r0)			@ the value is stored LE
+	mov	pc, r0			@ jump to this value
+/*
+ * the last word of this piece of code will be filled by the physical
+ * address of the boot address register just after being copied in SRAM
+ */
+1:
+	.long   .
+mvebu_boot_wa_end:
+ENDPROC(mvebu_boot_wa_end)
diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c
new file mode 100644
index 000000000..04d9ebe6a
--- /dev/null
+++ b/arch/arm/mach-mvebu/system-controller.c
@@ -0,0 +1,180 @@
+/*
+ * System controller support for Armada 370, 375 and XP platforms.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Lior Amsalem <alior@marvell.com>
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The Armada 370, 375 and Armada XP SoCs have a range of
+ * miscellaneous registers, that do not belong to a particular device,
+ * but rather provide system-level features. This basic
+ * system-controller driver provides a device tree binding for those
+ * registers, and implements utility functions offering various
+ * features related to those registers.
+ *
+ * For now, the feature set is limited to restarting the platform by a
+ * soft-reset, but it might be extended in the future.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+#include "common.h"
+#include "mvebu-soc-id.h"
+#include "pmsu.h"
+
+#define ARMADA_375_CRYPT0_ENG_TARGET 41
+#define ARMADA_375_CRYPT0_ENG_ATTR    1
+
+static void __iomem *system_controller_base;
+static phys_addr_t system_controller_phys_base;
+
+struct mvebu_system_controller {
+	u32 rstoutn_mask_offset;
+	u32 system_soft_reset_offset;
+
+	u32 rstoutn_mask_reset_out_en;
+	u32 system_soft_reset;
+
+	u32 resume_boot_addr;
+
+	u32 dev_id;
+	u32 rev_id;
+};
+static struct mvebu_system_controller *mvebu_sc;
+
+static const struct mvebu_system_controller armada_370_xp_system_controller = {
+	.rstoutn_mask_offset = 0x60,
+	.system_soft_reset_offset = 0x64,
+	.rstoutn_mask_reset_out_en = 0x1,
+	.system_soft_reset = 0x1,
+	.dev_id = 0x38,
+	.rev_id = 0x3c,
+};
+
+static const struct mvebu_system_controller armada_375_system_controller = {
+	.rstoutn_mask_offset = 0x54,
+	.system_soft_reset_offset = 0x58,
+	.rstoutn_mask_reset_out_en = 0x1,
+	.system_soft_reset = 0x1,
+	.resume_boot_addr = 0xd4,
+	.dev_id = 0x38,
+	.rev_id = 0x3c,
+};
+
+static const struct mvebu_system_controller orion_system_controller = {
+	.rstoutn_mask_offset = 0x108,
+	.system_soft_reset_offset = 0x10c,
+	.rstoutn_mask_reset_out_en = 0x4,
+	.system_soft_reset = 0x1,
+};
+
+static const struct of_device_id of_system_controller_table[] = {
+	{
+		.compatible = "marvell,orion-system-controller",
+		.data = (void *) &orion_system_controller,
+	}, {
+		.compatible = "marvell,armada-370-xp-system-controller",
+		.data = (void *) &armada_370_xp_system_controller,
+	}, {
+		.compatible = "marvell,armada-375-system-controller",
+		.data = (void *) &armada_375_system_controller,
+	},
+	{ /* end of list */ },
+};
+
+void mvebu_restart(enum reboot_mode mode, const char *cmd)
+{
+	if (!system_controller_base) {
+		pr_err("Cannot restart, system-controller not available: check the device tree\n");
+	} else {
+		/*
+		 * Enable soft reset to assert RSTOUTn.
+		 */
+		writel(mvebu_sc->rstoutn_mask_reset_out_en,
+			system_controller_base +
+			mvebu_sc->rstoutn_mask_offset);
+		/*
+		 * Assert soft reset.
+		 */
+		writel(mvebu_sc->system_soft_reset,
+			system_controller_base +
+			mvebu_sc->system_soft_reset_offset);
+	}
+
+	while (1)
+		;
+}
+
+int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev)
+{
+	if (of_machine_is_compatible("marvell,armada380") &&
+		system_controller_base) {
+		*dev = readl(system_controller_base + mvebu_sc->dev_id) >> 16;
+		*rev = (readl(system_controller_base + mvebu_sc->rev_id) >> 8)
+			& 0xF;
+		return 0;
+	} else
+		return -ENODEV;
+}
+
+#if defined(CONFIG_SMP) && defined(CONFIG_MACH_MVEBU_V7)
+static void mvebu_armada375_smp_wa_init(void)
+{
+	u32 dev, rev;
+	phys_addr_t resume_addr_reg;
+
+	if (mvebu_get_soc_id(&dev, &rev) != 0)
+		return;
+
+	if (rev != ARMADA_375_Z1_REV)
+		return;
+
+	resume_addr_reg = system_controller_phys_base +
+		mvebu_sc->resume_boot_addr;
+	mvebu_setup_boot_addr_wa(ARMADA_375_CRYPT0_ENG_TARGET,
+				 ARMADA_375_CRYPT0_ENG_ATTR,
+				 resume_addr_reg);
+}
+
+void mvebu_system_controller_set_cpu_boot_addr(void *boot_addr)
+{
+	BUG_ON(system_controller_base == NULL);
+	BUG_ON(mvebu_sc->resume_boot_addr == 0);
+
+	if (of_machine_is_compatible("marvell,armada375"))
+		mvebu_armada375_smp_wa_init();
+
+	writel(__pa_symbol(boot_addr), system_controller_base +
+	       mvebu_sc->resume_boot_addr);
+}
+#endif
+
+static int __init mvebu_system_controller_init(void)
+{
+	const struct of_device_id *match;
+	struct device_node *np;
+
+	np = of_find_matching_node_and_match(NULL, of_system_controller_table,
+					     &match);
+	if (np) {
+		struct resource res;
+		system_controller_base = of_iomap(np, 0);
+		of_address_to_resource(np, 0, &res);
+		system_controller_phys_base = res.start;
+		mvebu_sc = (struct mvebu_system_controller *)match->data;
+		of_node_put(np);
+	}
+
+	return 0;
+}
+
+early_initcall(mvebu_system_controller_init);