Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

20 files changed, 2719 insertions, 0 deletions

diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
new file mode 100644
index 000000000..90a645a18
--- /dev/null
+++ b/arch/arm/mach-rpc/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y	:=dma.o ecard.o ecard-loader.o fiq.o floppydma.o io-acorn.o irq.o \
+	  riscpc.o time.o
diff --git a/arch/arm/mach-rpc/Makefile.boot b/arch/arm/mach-rpc/Makefile.boot
new file mode 100644
index 000000000..0ed8e8fbd
--- /dev/null
+++ b/arch/arm/mach-rpc/Makefile.boot
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+   zreladdr-y	+= 0x10008000
+params_phys-y	:= 0x10000100
+initrd_phys-y	:= 0x18000000
+
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
new file mode 100644
index 000000000..50e0f97af
--- /dev/null
+++ b/arch/arm/mach-rpc/dma.c
@@ -0,0 +1,393 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/mach-rpc/dma.c
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ *  DMA functions specific to RiscPC architecture
+ */
+#include <linux/mman.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/fiq.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <linux/uaccess.h>
+
+#include <asm/mach/dma.h>
+#include <asm/hardware/iomd.h>
+
+struct iomd_dma {
+	struct dma_struct	dma;
+	void __iomem		*base;		/* Controller base address */
+	int			irq;		/* Controller IRQ */
+	unsigned int		state;
+	dma_addr_t		cur_addr;
+	unsigned int		cur_len;
+	dma_addr_t		dma_addr;
+	unsigned int		dma_len;
+};
+
+#if 0
+typedef enum {
+	dma_size_8	= 1,
+	dma_size_16	= 2,
+	dma_size_32	= 4,
+	dma_size_128	= 16
+} dma_size_t;
+#endif
+
+#define TRANSFER_SIZE	2
+
+#define CURA	(0)
+#define ENDA	(IOMD_IO0ENDA - IOMD_IO0CURA)
+#define CURB	(IOMD_IO0CURB - IOMD_IO0CURA)
+#define ENDB	(IOMD_IO0ENDB - IOMD_IO0CURA)
+#define CR	(IOMD_IO0CR - IOMD_IO0CURA)
+#define ST	(IOMD_IO0ST - IOMD_IO0CURA)
+
+static void iomd_get_next_sg(struct iomd_dma *idma)
+{
+	unsigned long end, offset, flags = 0;
+
+	if (idma->dma.sg) {
+		idma->cur_addr = idma->dma_addr;
+		offset = idma->cur_addr & ~PAGE_MASK;
+
+		end = offset + idma->dma_len;
+
+		if (end > PAGE_SIZE)
+			end = PAGE_SIZE;
+
+		if (offset + TRANSFER_SIZE >= end)
+			flags |= DMA_END_L;
+
+		idma->cur_len = end - TRANSFER_SIZE;
+
+		idma->dma_len -= end - offset;
+		idma->dma_addr += end - offset;
+
+		if (idma->dma_len == 0) {
+			if (idma->dma.sgcount > 1) {
+				idma->dma.sg = sg_next(idma->dma.sg);
+				idma->dma_addr = idma->dma.sg->dma_address;
+				idma->dma_len = idma->dma.sg->length;
+				idma->dma.sgcount--;
+			} else {
+				idma->dma.sg = NULL;
+				flags |= DMA_END_S;
+			}
+		}
+	} else {
+		flags = DMA_END_S | DMA_END_L;
+		idma->cur_addr = 0;
+		idma->cur_len = 0;
+	}
+
+	idma->cur_len |= flags;
+}
+
+static irqreturn_t iomd_dma_handle(int irq, void *dev_id)
+{
+	struct iomd_dma *idma = dev_id;
+	void __iomem *base = idma->base;
+	unsigned int state = idma->state;
+	unsigned int status, cur, end;
+
+	do {
+		status = readb(base + ST);
+		if (!(status & DMA_ST_INT))
+			goto out;
+
+		if ((state ^ status) & DMA_ST_AB)
+			iomd_get_next_sg(idma);
+
+		// This efficiently implements state = OFL != AB ? AB : 0
+		state = ((status >> 2) ^ status) & DMA_ST_AB;
+		if (state) {
+			cur = CURA;
+			end = ENDA;
+		} else {
+			cur = CURB;
+			end = ENDB;
+		}
+		writel(idma->cur_addr, base + cur);
+		writel(idma->cur_len, base + end);
+
+		if (status & DMA_ST_OFL &&
+		    idma->cur_len == (DMA_END_S|DMA_END_L))
+			break;
+	} while (1);
+
+	state = ~DMA_ST_AB;
+	disable_irq_nosync(irq);
+out:
+	idma->state = state;
+	return IRQ_HANDLED;
+}
+
+static int iomd_request_dma(unsigned int chan, dma_t *dma)
+{
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+	return request_irq(idma->irq, iomd_dma_handle,
+			   0, idma->dma.device_id, idma);
+}
+
+static void iomd_free_dma(unsigned int chan, dma_t *dma)
+{
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+
+	free_irq(idma->irq, idma);
+}
+
+static struct device isa_dma_dev = {
+	.init_name		= "fallback device",
+	.coherent_dma_mask	= ~(dma_addr_t)0,
+	.dma_mask		= &isa_dma_dev.coherent_dma_mask,
+};
+
+static void iomd_enable_dma(unsigned int chan, dma_t *dma)
+{
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+	void __iomem *base = idma->base;
+	unsigned int ctrl = TRANSFER_SIZE | DMA_CR_E;
+
+	if (idma->dma.invalid) {
+		idma->dma.invalid = 0;
+
+		/*
+		 * Cope with ISA-style drivers which expect cache
+		 * coherence.
+		 */
+		if (!idma->dma.sg) {
+			idma->dma.sg = &idma->dma.buf;
+			idma->dma.sgcount = 1;
+			idma->dma.buf.length = idma->dma.count;
+			idma->dma.buf.dma_address = dma_map_single(&isa_dma_dev,
+				idma->dma.addr, idma->dma.count,
+				idma->dma.dma_mode == DMA_MODE_READ ?
+				DMA_FROM_DEVICE : DMA_TO_DEVICE);
+		}
+
+		idma->dma_addr = idma->dma.sg->dma_address;
+		idma->dma_len = idma->dma.sg->length;
+
+		writeb(DMA_CR_C, base + CR);
+		idma->state = DMA_ST_AB;
+	}
+
+	if (idma->dma.dma_mode == DMA_MODE_READ)
+		ctrl |= DMA_CR_D;
+
+	writeb(ctrl, base + CR);
+	enable_irq(idma->irq);
+}
+
+static void iomd_disable_dma(unsigned int chan, dma_t *dma)
+{
+	struct iomd_dma *idma = container_of(dma, struct iomd_dma, dma);
+	void __iomem *base = idma->base;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (idma->state != ~DMA_ST_AB)
+		disable_irq(idma->irq);
+	writeb(0, base + CR);
+	local_irq_restore(flags);
+}
+
+static int iomd_set_dma_speed(unsigned int chan, dma_t *dma, int cycle)
+{
+	int tcr, speed;
+
+	if (cycle < 188)
+		speed = 3;
+	else if (cycle <= 250)
+		speed = 2;
+	else if (cycle < 438)
+		speed = 1;
+	else
+		speed = 0;
+
+	tcr = iomd_readb(IOMD_DMATCR);
+	speed &= 3;
+
+	switch (chan) {
+	case DMA_0:
+		tcr = (tcr & ~0x03) | speed;
+		break;
+
+	case DMA_1:
+		tcr = (tcr & ~0x0c) | (speed << 2);
+		break;
+
+	case DMA_2:
+		tcr = (tcr & ~0x30) | (speed << 4);
+		break;
+
+	case DMA_3:
+		tcr = (tcr & ~0xc0) | (speed << 6);
+		break;
+
+	default:
+		break;
+	}
+
+	iomd_writeb(tcr, IOMD_DMATCR);
+
+	return speed;
+}
+
+static struct dma_ops iomd_dma_ops = {
+	.type		= "IOMD",
+	.request	= iomd_request_dma,
+	.free		= iomd_free_dma,
+	.enable		= iomd_enable_dma,
+	.disable	= iomd_disable_dma,
+	.setspeed	= iomd_set_dma_speed,
+};
+
+static struct fiq_handler fh = {
+	.name	= "floppydma"
+};
+
+struct floppy_dma {
+	struct dma_struct	dma;
+	unsigned int		fiq;
+};
+
+static void floppy_enable_dma(unsigned int chan, dma_t *dma)
+{
+	struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
+	void *fiqhandler_start;
+	unsigned int fiqhandler_length;
+	struct pt_regs regs;
+
+	if (fdma->dma.sg)
+		BUG();
+
+	if (fdma->dma.dma_mode == DMA_MODE_READ) {
+		extern unsigned char floppy_fiqin_start, floppy_fiqin_end;
+		fiqhandler_start = &floppy_fiqin_start;
+		fiqhandler_length = &floppy_fiqin_end - &floppy_fiqin_start;
+	} else {
+		extern unsigned char floppy_fiqout_start, floppy_fiqout_end;
+		fiqhandler_start = &floppy_fiqout_start;
+		fiqhandler_length = &floppy_fiqout_end - &floppy_fiqout_start;
+	}
+
+	regs.ARM_r9  = fdma->dma.count;
+	regs.ARM_r10 = (unsigned long)fdma->dma.addr;
+	regs.ARM_fp  = (unsigned long)FLOPPYDMA_BASE;
+
+	if (claim_fiq(&fh)) {
+		printk("floppydma: couldn't claim FIQ.\n");
+		return;
+	}
+
+	set_fiq_handler(fiqhandler_start, fiqhandler_length);
+	set_fiq_regs(&regs);
+	enable_fiq(fdma->fiq);
+}
+
+static void floppy_disable_dma(unsigned int chan, dma_t *dma)
+{
+	struct floppy_dma *fdma = container_of(dma, struct floppy_dma, dma);
+	disable_fiq(fdma->fiq);
+	release_fiq(&fh);
+}
+
+static int floppy_get_residue(unsigned int chan, dma_t *dma)
+{
+	struct pt_regs regs;
+	get_fiq_regs(&regs);
+	return regs.ARM_r9;
+}
+
+static struct dma_ops floppy_dma_ops = {
+	.type		= "FIQDMA",
+	.enable		= floppy_enable_dma,
+	.disable	= floppy_disable_dma,
+	.residue	= floppy_get_residue,
+};
+
+/*
+ * This is virtual DMA - we don't need anything here.
+ */
+static void sound_enable_disable_dma(unsigned int chan, dma_t *dma)
+{
+}
+
+static struct dma_ops sound_dma_ops = {
+	.type		= "VIRTUAL",
+	.enable		= sound_enable_disable_dma,
+	.disable	= sound_enable_disable_dma,
+};
+
+static struct iomd_dma iomd_dma[6];
+
+static struct floppy_dma floppy_dma = {
+	.dma		= {
+		.d_ops	= &floppy_dma_ops,
+	},
+	.fiq		= FIQ_FLOPPYDATA,
+};
+
+static dma_t sound_dma = {
+	.d_ops		= &sound_dma_ops,
+};
+
+static int __init rpc_dma_init(void)
+{
+	unsigned int i;
+	int ret;
+
+	iomd_writeb(0, IOMD_IO0CR);
+	iomd_writeb(0, IOMD_IO1CR);
+	iomd_writeb(0, IOMD_IO2CR);
+	iomd_writeb(0, IOMD_IO3CR);
+
+	iomd_writeb(0xa0, IOMD_DMATCR);
+
+	/*
+	 * Setup DMA channels 2,3 to be for podules
+	 * and channels 0,1 for internal devices
+	 */
+	iomd_writeb(DMA_EXT_IO3|DMA_EXT_IO2, IOMD_DMAEXT);
+
+	iomd_dma[DMA_0].base	= IOMD_BASE + IOMD_IO0CURA;
+	iomd_dma[DMA_0].irq	= IRQ_DMA0;
+	iomd_dma[DMA_1].base	= IOMD_BASE + IOMD_IO1CURA;
+	iomd_dma[DMA_1].irq	= IRQ_DMA1;
+	iomd_dma[DMA_2].base	= IOMD_BASE + IOMD_IO2CURA;
+	iomd_dma[DMA_2].irq	= IRQ_DMA2;
+	iomd_dma[DMA_3].base	= IOMD_BASE + IOMD_IO3CURA;
+	iomd_dma[DMA_3].irq	= IRQ_DMA3;
+	iomd_dma[DMA_S0].base	= IOMD_BASE + IOMD_SD0CURA;
+	iomd_dma[DMA_S0].irq	= IRQ_DMAS0;
+	iomd_dma[DMA_S1].base	= IOMD_BASE + IOMD_SD1CURA;
+	iomd_dma[DMA_S1].irq	= IRQ_DMAS1;
+
+	for (i = DMA_0; i <= DMA_S1; i++) {
+		iomd_dma[i].dma.d_ops = &iomd_dma_ops;
+
+		ret = isa_dma_add(i, &iomd_dma[i].dma);
+		if (ret)
+			printk("IOMDDMA%u: unable to register: %d\n", i, ret);
+	}
+
+	ret = isa_dma_add(DMA_VIRTUAL_FLOPPY, &floppy_dma.dma);
+	if (ret)
+		printk("IOMDFLOPPY: unable to register: %d\n", ret);
+	ret = isa_dma_add(DMA_VIRTUAL_SOUND, &sound_dma);
+	if (ret)
+		printk("IOMDSOUND: unable to register: %d\n", ret);
+	return 0;
+}
+core_initcall(rpc_dma_init);
diff --git a/arch/arm/mach-rpc/ecard-loader.S b/arch/arm/mach-rpc/ecard-loader.S
new file mode 100644
index 000000000..eb8ac0412
--- /dev/null
+++ b/arch/arm/mach-rpc/ecard-loader.S
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/arch/arm/lib/ecard.S
+ *
+ *  Copyright (C) 1995, 1996 Russell King
+ *
+ * 27/03/03 Ian Molton Clean up CONFIG_CPU
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+#define CPSR2SPSR(rt) \
+		mrs	rt, cpsr; \
+		msr	spsr_cxsf, rt
+
+@ Purpose: call an expansion card loader to read bytes.
+@ Proto  : char read_loader(int offset, char *card_base, char *loader);
+@ Returns: byte read
+
+ENTRY(ecard_loader_read)
+		stmfd	sp!, {r4 - r12, lr}
+		mov	r11, r1
+		mov	r1, r0
+		CPSR2SPSR(r0)
+		mov	lr, pc
+		mov	pc, r2
+		ldmfd	sp!, {r4 - r12, pc}
+
+@ Purpose: call an expansion card loader to reset the card
+@ Proto  : void read_loader(int card_base, char *loader);
+@ Returns: byte read
+
+ENTRY(ecard_loader_reset)
+		stmfd	sp!, {r4 - r12, lr}
+		mov	r11, r0
+		CPSR2SPSR(r0)
+		mov	lr, pc
+		add	pc, r1, #8
+		ldmfd	sp!, {r4 - r12, pc}
+
diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c
new file mode 100644
index 000000000..827b50f1c
--- /dev/null
+++ b/arch/arm/mach-rpc/ecard.c
@@ -0,0 +1,1148 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/kernel/ecard.c
+ *
+ *  Copyright 1995-2001 Russell King
+ *
+ *  Find all installed expansion cards, and handle interrupts from them.
+ *
+ *  Created from information from Acorns RiscOS3 PRMs
+ *
+ *  08-Dec-1996	RMK	Added code for the 9'th expansion card - the ether
+ *			podule slot.
+ *  06-May-1997	RMK	Added blacklist for cards whose loader doesn't work.
+ *  12-Sep-1997	RMK	Created new handling of interrupt enables/disables
+ *			- cards can now register their own routine to control
+ *			interrupts (recommended).
+ *  29-Sep-1997	RMK	Expansion card interrupt hardware not being re-enabled
+ *			on reset from Linux. (Caused cards not to respond
+ *			under RiscOS without hard reset).
+ *  15-Feb-1998	RMK	Added DMA support
+ *  12-Sep-1998	RMK	Added EASI support
+ *  10-Jan-1999	RMK	Run loaders in a simulated RISC OS environment.
+ *  17-Apr-1999	RMK	Support for EASI Type C cycles.
+ */
+#define ECARD_C
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/sched/mm.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/reboot.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/kthread.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/dma.h>
+#include <asm/ecard.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm/mmu_context.h>
+#include <asm/mach/irq.h>
+#include <asm/tlbflush.h>
+
+#include "ecard.h"
+
+struct ecard_request {
+	void		(*fn)(struct ecard_request *);
+	ecard_t		*ec;
+	unsigned int	address;
+	unsigned int	length;
+	unsigned int	use_loader;
+	void		*buffer;
+	struct completion *complete;
+};
+
+struct expcard_quirklist {
+	unsigned short	 manufacturer;
+	unsigned short	 product;
+	const char	*type;
+	void (*init)(ecard_t *ec);
+};
+
+static ecard_t *cards;
+static ecard_t *slot_to_expcard[MAX_ECARDS];
+static unsigned int ectcr;
+
+static void atomwide_3p_quirk(ecard_t *ec);
+
+/* List of descriptions of cards which don't have an extended
+ * identification, or chunk directories containing a description.
+ */
+static struct expcard_quirklist quirklist[] __initdata = {
+	{ MANU_ACORN, PROD_ACORN_ETHER1, "Acorn Ether1" },
+	{ MANU_ATOMWIDE, PROD_ATOMWIDE_3PSERIAL, NULL, atomwide_3p_quirk },
+};
+
+asmlinkage extern int
+ecard_loader_reset(unsigned long base, loader_t loader);
+asmlinkage extern int
+ecard_loader_read(int off, unsigned long base, loader_t loader);
+
+static inline unsigned short ecard_getu16(unsigned char *v)
+{
+	return v[0] | v[1] << 8;
+}
+
+static inline signed long ecard_gets24(unsigned char *v)
+{
+	return v[0] | v[1] << 8 | v[2] << 16 | ((v[2] & 0x80) ? 0xff000000 : 0);
+}
+
+static inline ecard_t *slot_to_ecard(unsigned int slot)
+{
+	return slot < MAX_ECARDS ? slot_to_expcard[slot] : NULL;
+}
+
+/* ===================== Expansion card daemon ======================== */
+/*
+ * Since the loader programs on the expansion cards need to be run
+ * in a specific environment, create a separate task with this
+ * environment up, and pass requests to this task as and when we
+ * need to.
+ *
+ * This should allow 99% of loaders to be called from Linux.
+ *
+ * From a security standpoint, we trust the card vendors.  This
+ * may be a misplaced trust.
+ */
+static void ecard_task_reset(struct ecard_request *req)
+{
+	struct expansion_card *ec = req->ec;
+	struct resource *res;
+
+	res = ec->slot_no == 8
+		? &ec->resource[ECARD_RES_MEMC]
+		: ec->easi
+		  ? &ec->resource[ECARD_RES_EASI]
+		  : &ec->resource[ECARD_RES_IOCSYNC];
+
+	ecard_loader_reset(res->start, ec->loader);
+}
+
+static void ecard_task_readbytes(struct ecard_request *req)
+{
+	struct expansion_card *ec = req->ec;
+	unsigned char *buf = req->buffer;
+	unsigned int len = req->length;
+	unsigned int off = req->address;
+
+	if (ec->slot_no == 8) {
+		void __iomem *base = (void __iomem *)
+				ec->resource[ECARD_RES_MEMC].start;
+
+		/*
+		 * The card maintains an index which increments the address
+		 * into a 4096-byte page on each access.  We need to keep
+		 * track of the counter.
+		 */
+		static unsigned int index;
+		unsigned int page;
+
+		page = (off >> 12) * 4;
+		if (page > 256 * 4)
+			return;
+
+		off &= 4095;
+
+		/*
+		 * If we are reading offset 0, or our current index is
+		 * greater than the offset, reset the hardware index counter.
+		 */
+		if (off == 0 || index > off) {
+			writeb(0, base);
+			index = 0;
+		}
+
+		/*
+		 * Increment the hardware index counter until we get to the
+		 * required offset.  The read bytes are discarded.
+		 */
+		while (index < off) {
+			readb(base + page);
+			index += 1;
+		}
+
+		while (len--) {
+			*buf++ = readb(base + page);
+			index += 1;
+		}
+	} else {
+		unsigned long base = (ec->easi
+			 ? &ec->resource[ECARD_RES_EASI]
+			 : &ec->resource[ECARD_RES_IOCSYNC])->start;
+		void __iomem *pbase = (void __iomem *)base;
+
+		if (!req->use_loader || !ec->loader) {
+			off *= 4;
+			while (len--) {
+				*buf++ = readb(pbase + off);
+				off += 4;
+			}
+		} else {
+			while(len--) {
+				/*
+				 * The following is required by some
+				 * expansion card loader programs.
+				 */
+				*(unsigned long *)0x108 = 0;
+				*buf++ = ecard_loader_read(off++, base,
+							   ec->loader);
+			}
+		}
+	}
+
+}
+
+static DECLARE_WAIT_QUEUE_HEAD(ecard_wait);
+static struct ecard_request *ecard_req;
+static DEFINE_MUTEX(ecard_mutex);
+
+/*
+ * Set up the expansion card daemon's page tables.
+ */
+static void ecard_init_pgtables(struct mm_struct *mm)
+{
+	struct vm_area_struct vma = TLB_FLUSH_VMA(mm, VM_EXEC);
+
+	/* We want to set up the page tables for the following mapping:
+	 *  Virtual	Physical
+	 *  0x03000000	0x03000000
+	 *  0x03010000	unmapped
+	 *  0x03210000	0x03210000
+	 *  0x03400000	unmapped
+	 *  0x08000000	0x08000000
+	 *  0x10000000	unmapped
+	 *
+	 * FIXME: we don't follow this 100% yet.
+	 */
+	pgd_t *src_pgd, *dst_pgd;
+
+	src_pgd = pgd_offset(mm, (unsigned long)IO_BASE);
+	dst_pgd = pgd_offset(mm, IO_START);
+
+	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE));
+
+	src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE);
+	dst_pgd = pgd_offset(mm, EASI_START);
+
+	memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE));
+
+	flush_tlb_range(&vma, IO_START, IO_START + IO_SIZE);
+	flush_tlb_range(&vma, EASI_START, EASI_START + EASI_SIZE);
+}
+
+static int ecard_init_mm(void)
+{
+	struct mm_struct * mm = mm_alloc();
+	struct mm_struct *active_mm = current->active_mm;
+
+	if (!mm)
+		return -ENOMEM;
+
+	current->mm = mm;
+	current->active_mm = mm;
+	activate_mm(active_mm, mm);
+	mmdrop(active_mm);
+	ecard_init_pgtables(mm);
+	return 0;
+}
+
+static int
+ecard_task(void * unused)
+{
+	/*
+	 * Allocate a mm.  We're not a lazy-TLB kernel task since we need
+	 * to set page table entries where the user space would be.  Note
+	 * that this also creates the page tables.  Failure is not an
+	 * option here.
+	 */
+	if (ecard_init_mm())
+		panic("kecardd: unable to alloc mm\n");
+
+	while (1) {
+		struct ecard_request *req;
+
+		wait_event_interruptible(ecard_wait, ecard_req != NULL);
+
+		req = xchg(&ecard_req, NULL);
+		if (req != NULL) {
+			req->fn(req);
+			complete(req->complete);
+		}
+	}
+}
+
+/*
+ * Wake the expansion card daemon to action our request.
+ *
+ * FIXME: The test here is not sufficient to detect if the
+ * kcardd is running.
+ */
+static void ecard_call(struct ecard_request *req)
+{
+	DECLARE_COMPLETION_ONSTACK(completion);
+
+	req->complete = &completion;
+
+	mutex_lock(&ecard_mutex);
+	ecard_req = req;
+	wake_up(&ecard_wait);
+
+	/*
+	 * Now wait for kecardd to run.
+	 */
+	wait_for_completion(&completion);
+	mutex_unlock(&ecard_mutex);
+}
+
+/* ======================= Mid-level card control ===================== */
+
+static void
+ecard_readbytes(void *addr, ecard_t *ec, int off, int len, int useld)
+{
+	struct ecard_request req;
+
+	req.fn		= ecard_task_readbytes;
+	req.ec		= ec;
+	req.address	= off;
+	req.length	= len;
+	req.use_loader	= useld;
+	req.buffer	= addr;
+
+	ecard_call(&req);
+}
+
+int ecard_readchunk(struct in_chunk_dir *cd, ecard_t *ec, int id, int num)
+{
+	struct ex_chunk_dir excd;
+	int index = 16;
+	int useld = 0;
+
+	if (!ec->cid.cd)
+		return 0;
+
+	while(1) {
+		ecard_readbytes(&excd, ec, index, 8, useld);
+		index += 8;
+		if (c_id(&excd) == 0) {
+			if (!useld && ec->loader) {
+				useld = 1;
+				index = 0;
+				continue;
+			}
+			return 0;
+		}
+		if (c_id(&excd) == 0xf0) { /* link */
+			index = c_start(&excd);
+			continue;
+		}
+		if (c_id(&excd) == 0x80) { /* loader */
+			if (!ec->loader) {
+				ec->loader = kmalloc(c_len(&excd),
+							       GFP_KERNEL);
+				if (ec->loader)
+					ecard_readbytes(ec->loader, ec,
+							(int)c_start(&excd),
+							c_len(&excd), useld);
+				else
+					return 0;
+			}
+			continue;
+		}
+		if (c_id(&excd) == id && num-- == 0)
+			break;
+	}
+
+	if (c_id(&excd) & 0x80) {
+		switch (c_id(&excd) & 0x70) {
+		case 0x70:
+			ecard_readbytes((unsigned char *)excd.d.string, ec,
+					(int)c_start(&excd), c_len(&excd),
+					useld);
+			break;
+		case 0x00:
+			break;
+		}
+	}
+	cd->start_offset = c_start(&excd);
+	memcpy(cd->d.string, excd.d.string, 256);
+	return 1;
+}
+
+/* ======================= Interrupt control ============================ */
+
+static void ecard_def_irq_enable(ecard_t *ec, int irqnr)
+{
+}
+
+static void ecard_def_irq_disable(ecard_t *ec, int irqnr)
+{
+}
+
+static int ecard_def_irq_pending(ecard_t *ec)
+{
+	return !ec->irqmask || readb(ec->irqaddr) & ec->irqmask;
+}
+
+static void ecard_def_fiq_enable(ecard_t *ec, int fiqnr)
+{
+	panic("ecard_def_fiq_enable called - impossible");
+}
+
+static void ecard_def_fiq_disable(ecard_t *ec, int fiqnr)
+{
+	panic("ecard_def_fiq_disable called - impossible");
+}
+
+static int ecard_def_fiq_pending(ecard_t *ec)
+{
+	return !ec->fiqmask || readb(ec->fiqaddr) & ec->fiqmask;
+}
+
+static expansioncard_ops_t ecard_default_ops = {
+	ecard_def_irq_enable,
+	ecard_def_irq_disable,
+	ecard_def_irq_pending,
+	ecard_def_fiq_enable,
+	ecard_def_fiq_disable,
+	ecard_def_fiq_pending
+};
+
+/*
+ * Enable and disable interrupts from expansion cards.
+ * (interrupts are disabled for these functions).
+ *
+ * They are not meant to be called directly, but via enable/disable_irq.
+ */
+static void ecard_irq_unmask(struct irq_data *d)
+{
+	ecard_t *ec = irq_data_get_irq_chip_data(d);
+
+	if (ec) {
+		if (!ec->ops)
+			ec->ops = &ecard_default_ops;
+
+		if (ec->claimed && ec->ops->irqenable)
+			ec->ops->irqenable(ec, d->irq);
+		else
+			printk(KERN_ERR "ecard: rejecting request to "
+				"enable IRQs for %d\n", d->irq);
+	}
+}
+
+static void ecard_irq_mask(struct irq_data *d)
+{
+	ecard_t *ec = irq_data_get_irq_chip_data(d);
+
+	if (ec) {
+		if (!ec->ops)
+			ec->ops = &ecard_default_ops;
+
+		if (ec->ops && ec->ops->irqdisable)
+			ec->ops->irqdisable(ec, d->irq);
+	}
+}
+
+static struct irq_chip ecard_chip = {
+	.name		= "ECARD",
+	.irq_ack	= ecard_irq_mask,
+	.irq_mask	= ecard_irq_mask,
+	.irq_unmask	= ecard_irq_unmask,
+};
+
+void ecard_enablefiq(unsigned int fiqnr)
+{
+	ecard_t *ec = slot_to_ecard(fiqnr);
+
+	if (ec) {
+		if (!ec->ops)
+			ec->ops = &ecard_default_ops;
+
+		if (ec->claimed && ec->ops->fiqenable)
+			ec->ops->fiqenable(ec, fiqnr);
+		else
+			printk(KERN_ERR "ecard: rejecting request to "
+				"enable FIQs for %d\n", fiqnr);
+	}
+}
+
+void ecard_disablefiq(unsigned int fiqnr)
+{
+	ecard_t *ec = slot_to_ecard(fiqnr);
+
+	if (ec) {
+		if (!ec->ops)
+			ec->ops = &ecard_default_ops;
+
+		if (ec->ops->fiqdisable)
+			ec->ops->fiqdisable(ec, fiqnr);
+	}
+}
+
+static void ecard_dump_irq_state(void)
+{
+	ecard_t *ec;
+
+	printk("Expansion card IRQ state:\n");
+
+	for (ec = cards; ec; ec = ec->next) {
+		const char *claimed;
+
+		if (ec->slot_no == 8)
+			continue;
+
+		claimed = ec->claimed ? "" : "not ";
+
+		if (ec->ops && ec->ops->irqpending &&
+		    ec->ops != &ecard_default_ops)
+			printk("  %d: %sclaimed irq %spending\n",
+			       ec->slot_no, claimed,
+			       ec->ops->irqpending(ec) ? "" : "not ");
+		else
+			printk("  %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n",
+			       ec->slot_no, claimed,
+			       ec->irqaddr, ec->irqmask, readb(ec->irqaddr));
+	}
+}
+
+static void ecard_check_lockup(struct irq_desc *desc)
+{
+	static unsigned long last;
+	static int lockup;
+
+	/*
+	 * If the timer interrupt has not run since the last million
+	 * unrecognised expansion card interrupts, then there is
+	 * something seriously wrong.  Disable the expansion card
+	 * interrupts so at least we can continue.
+	 *
+	 * Maybe we ought to start a timer to re-enable them some time
+	 * later?
+	 */
+	if (last == jiffies) {
+		lockup += 1;
+		if (lockup > 1000000) {
+			printk(KERN_ERR "\nInterrupt lockup detected - "
+			       "disabling all expansion card interrupts\n");
+
+			desc->irq_data.chip->irq_mask(&desc->irq_data);
+			ecard_dump_irq_state();
+		}
+	} else
+		lockup = 0;
+
+	/*
+	 * If we did not recognise the source of this interrupt,
+	 * warn the user, but don't flood the user with these messages.
+	 */
+	if (!last || time_after(jiffies, last + 5*HZ)) {
+		last = jiffies;
+		printk(KERN_WARNING "Unrecognised interrupt from backplane\n");
+		ecard_dump_irq_state();
+	}
+}
+
+static void ecard_irq_handler(struct irq_desc *desc)
+{
+	ecard_t *ec;
+	int called = 0;
+
+	desc->irq_data.chip->irq_mask(&desc->irq_data);
+	for (ec = cards; ec; ec = ec->next) {
+		int pending;
+
+		if (!ec->claimed || !ec->irq || ec->slot_no == 8)
+			continue;
+
+		if (ec->ops && ec->ops->irqpending)
+			pending = ec->ops->irqpending(ec);
+		else
+			pending = ecard_default_ops.irqpending(ec);
+
+		if (pending) {
+			generic_handle_irq(ec->irq);
+			called ++;
+		}
+	}
+	desc->irq_data.chip->irq_unmask(&desc->irq_data);
+
+	if (called == 0)
+		ecard_check_lockup(desc);
+}
+
+static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed)
+{
+	void __iomem *address = NULL;
+	int slot = ec->slot_no;
+
+	if (ec->slot_no == 8)
+		return ECARD_MEMC8_BASE;
+
+	ectcr &= ~(1 << slot);
+
+	switch (type) {
+	case ECARD_MEMC:
+		if (slot < 4)
+			address = ECARD_MEMC_BASE + (slot << 14);
+		break;
+
+	case ECARD_IOC:
+		if (slot < 4)
+			address = ECARD_IOC_BASE + (slot << 14);
+		else
+			address = ECARD_IOC4_BASE + ((slot - 4) << 14);
+		if (address)
+			address += speed << 19;
+		break;
+
+	case ECARD_EASI:
+		address = ECARD_EASI_BASE + (slot << 24);
+		if (speed == ECARD_FAST)
+			ectcr |= 1 << slot;
+		break;
+
+	default:
+		break;
+	}
+
+#ifdef IOMD_ECTCR
+	iomd_writeb(ectcr, IOMD_ECTCR);
+#endif
+	return address;
+}
+
+static int ecard_prints(struct seq_file *m, ecard_t *ec)
+{
+	seq_printf(m, "  %d: %s ", ec->slot_no, ec->easi ? "EASI" : "    ");
+
+	if (ec->cid.id == 0) {
+		struct in_chunk_dir incd;
+
+		seq_printf(m, "[%04X:%04X] ",
+			ec->cid.manufacturer, ec->cid.product);
+
+		if (!ec->card_desc && ec->cid.cd &&
+		    ecard_readchunk(&incd, ec, 0xf5, 0)) {
+			ec->card_desc = kmalloc(strlen(incd.d.string)+1, GFP_KERNEL);
+
+			if (ec->card_desc)
+				strcpy((char *)ec->card_desc, incd.d.string);
+		}
+
+		seq_printf(m, "%s\n", ec->card_desc ? ec->card_desc : "*unknown*");
+	} else
+		seq_printf(m, "Simple card %d\n", ec->cid.id);
+
+	return 0;
+}
+
+static int ecard_devices_proc_show(struct seq_file *m, void *v)
+{
+	ecard_t *ec = cards;
+
+	while (ec) {
+		ecard_prints(m, ec);
+		ec = ec->next;
+	}
+	return 0;
+}
+
+static struct proc_dir_entry *proc_bus_ecard_dir = NULL;
+
+static void ecard_proc_init(void)
+{
+	proc_bus_ecard_dir = proc_mkdir("bus/ecard", NULL);
+	proc_create_single("devices", 0, proc_bus_ecard_dir,
+			ecard_devices_proc_show);
+}
+
+#define ec_set_resource(ec,nr,st,sz)				\
+	do {							\
+		(ec)->resource[nr].name = dev_name(&ec->dev);	\
+		(ec)->resource[nr].start = st;			\
+		(ec)->resource[nr].end = (st) + (sz) - 1;	\
+		(ec)->resource[nr].flags = IORESOURCE_MEM;	\
+	} while (0)
+
+static void __init ecard_free_card(struct expansion_card *ec)
+{
+	int i;
+
+	for (i = 0; i < ECARD_NUM_RESOURCES; i++)
+		if (ec->resource[i].flags)
+			release_resource(&ec->resource[i]);
+
+	kfree(ec);
+}
+
+static struct expansion_card *__init ecard_alloc_card(int type, int slot)
+{
+	struct expansion_card *ec;
+	unsigned long base;
+	int i;
+
+	ec = kzalloc(sizeof(ecard_t), GFP_KERNEL);
+	if (!ec) {
+		ec = ERR_PTR(-ENOMEM);
+		goto nomem;
+	}
+
+	ec->slot_no = slot;
+	ec->easi = type == ECARD_EASI;
+	ec->irq = 0;
+	ec->fiq = 0;
+	ec->dma = NO_DMA;
+	ec->ops = &ecard_default_ops;
+
+	dev_set_name(&ec->dev, "ecard%d", slot);
+	ec->dev.parent = NULL;
+	ec->dev.bus = &ecard_bus_type;
+	ec->dev.dma_mask = &ec->dma_mask;
+	ec->dma_mask = (u64)0xffffffff;
+	ec->dev.coherent_dma_mask = ec->dma_mask;
+
+	if (slot < 4) {
+		ec_set_resource(ec, ECARD_RES_MEMC,
+				PODSLOT_MEMC_BASE + (slot << 14),
+				PODSLOT_MEMC_SIZE);
+		base = PODSLOT_IOC0_BASE + (slot << 14);
+	} else
+		base = PODSLOT_IOC4_BASE + ((slot - 4) << 14);
+
+#ifdef CONFIG_ARCH_RPC
+	if (slot < 8) {
+		ec_set_resource(ec, ECARD_RES_EASI,
+				PODSLOT_EASI_BASE + (slot << 24),
+				PODSLOT_EASI_SIZE);
+	}
+
+	if (slot == 8) {
+		ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE, NETSLOT_SIZE);
+	} else
+#endif
+
+	for (i = 0; i <= ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++)
+		ec_set_resource(ec, i + ECARD_RES_IOCSLOW,
+				base + (i << 19), PODSLOT_IOC_SIZE);
+
+	for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
+		if (ec->resource[i].flags &&
+		    request_resource(&iomem_resource, &ec->resource[i])) {
+			dev_err(&ec->dev, "resource(s) not available\n");
+			ec->resource[i].end -= ec->resource[i].start;
+			ec->resource[i].start = 0;
+			ec->resource[i].flags = 0;
+		}
+	}
+
+ nomem:
+	return ec;
+}
+
+static ssize_t irq_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	return sprintf(buf, "%u\n", ec->irq);
+}
+static DEVICE_ATTR_RO(irq);
+
+static ssize_t dma_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	return sprintf(buf, "%u\n", ec->dma);
+}
+static DEVICE_ATTR_RO(dma);
+
+static ssize_t resource_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	char *str = buf;
+	int i;
+
+	for (i = 0; i < ECARD_NUM_RESOURCES; i++)
+		str += sprintf(str, "%08x %08x %08lx\n",
+				ec->resource[i].start,
+				ec->resource[i].end,
+				ec->resource[i].flags);
+
+	return str - buf;
+}
+static DEVICE_ATTR_RO(resource);
+
+static ssize_t vendor_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	return sprintf(buf, "%u\n", ec->cid.manufacturer);
+}
+static DEVICE_ATTR_RO(vendor);
+
+static ssize_t device_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	return sprintf(buf, "%u\n", ec->cid.product);
+}
+static DEVICE_ATTR_RO(device);
+
+static ssize_t type_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	return sprintf(buf, "%s\n", ec->easi ? "EASI" : "IOC");
+}
+static DEVICE_ATTR_RO(type);
+
+static struct attribute *ecard_dev_attrs[] = {
+	&dev_attr_device.attr,
+	&dev_attr_dma.attr,
+	&dev_attr_irq.attr,
+	&dev_attr_resource.attr,
+	&dev_attr_type.attr,
+	&dev_attr_vendor.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(ecard_dev);
+
+int ecard_request_resources(struct expansion_card *ec)
+{
+	int i, err = 0;
+
+	for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
+		if (ecard_resource_end(ec, i) &&
+		    !request_mem_region(ecard_resource_start(ec, i),
+					ecard_resource_len(ec, i),
+					ec->dev.driver->name)) {
+			err = -EBUSY;
+			break;
+		}
+	}
+
+	if (err) {
+		while (i--)
+			if (ecard_resource_end(ec, i))
+				release_mem_region(ecard_resource_start(ec, i),
+						   ecard_resource_len(ec, i));
+	}
+	return err;
+}
+EXPORT_SYMBOL(ecard_request_resources);
+
+void ecard_release_resources(struct expansion_card *ec)
+{
+	int i;
+
+	for (i = 0; i < ECARD_NUM_RESOURCES; i++)
+		if (ecard_resource_end(ec, i))
+			release_mem_region(ecard_resource_start(ec, i),
+					   ecard_resource_len(ec, i));
+}
+EXPORT_SYMBOL(ecard_release_resources);
+
+void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data)
+{
+	ec->irq_data = irq_data;
+	barrier();
+	ec->ops = ops;
+}
+EXPORT_SYMBOL(ecard_setirq);
+
+void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
+			   unsigned long offset, unsigned long maxsize)
+{
+	unsigned long start = ecard_resource_start(ec, res);
+	unsigned long end = ecard_resource_end(ec, res);
+
+	if (offset > (end - start))
+		return NULL;
+
+	start += offset;
+	if (maxsize && end - start > maxsize)
+		end = start + maxsize;
+	
+	return devm_ioremap(&ec->dev, start, end - start);
+}
+EXPORT_SYMBOL(ecardm_iomap);
+
+static void atomwide_3p_quirk(ecard_t *ec)
+{
+	void __iomem *addr = __ecard_address(ec, ECARD_IOC, ECARD_SYNC);
+	unsigned int i;
+
+	/* Disable interrupts on each port */
+	for (i = 0x2000; i <= 0x2800; i += 0x0400)
+		writeb(0, addr + i + 4);	
+}
+
+/*
+ * Probe for an expansion card.
+ *
+ * If bit 1 of the first byte of the card is set, then the
+ * card does not exist.
+ */
+static int __init ecard_probe(int slot, unsigned irq, card_type_t type)
+{
+	ecard_t **ecp;
+	ecard_t *ec;
+	struct ex_ecid cid;
+	void __iomem *addr;
+	int i, rc;
+
+	ec = ecard_alloc_card(type, slot);
+	if (IS_ERR(ec)) {
+		rc = PTR_ERR(ec);
+		goto nomem;
+	}
+
+	rc = -ENODEV;
+	if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL)
+		goto nodev;
+
+	cid.r_zero = 1;
+	ecard_readbytes(&cid, ec, 0, 16, 0);
+	if (cid.r_zero)
+		goto nodev;
+
+	ec->cid.id	= cid.r_id;
+	ec->cid.cd	= cid.r_cd;
+	ec->cid.is	= cid.r_is;
+	ec->cid.w	= cid.r_w;
+	ec->cid.manufacturer = ecard_getu16(cid.r_manu);
+	ec->cid.product = ecard_getu16(cid.r_prod);
+	ec->cid.country = cid.r_country;
+	ec->cid.irqmask = cid.r_irqmask;
+	ec->cid.irqoff  = ecard_gets24(cid.r_irqoff);
+	ec->cid.fiqmask = cid.r_fiqmask;
+	ec->cid.fiqoff  = ecard_gets24(cid.r_fiqoff);
+	ec->fiqaddr	=
+	ec->irqaddr	= addr;
+
+	if (ec->cid.is) {
+		ec->irqmask = ec->cid.irqmask;
+		ec->irqaddr += ec->cid.irqoff;
+		ec->fiqmask = ec->cid.fiqmask;
+		ec->fiqaddr += ec->cid.fiqoff;
+	} else {
+		ec->irqmask = 1;
+		ec->fiqmask = 4;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(quirklist); i++)
+		if (quirklist[i].manufacturer == ec->cid.manufacturer &&
+		    quirklist[i].product == ec->cid.product) {
+			if (quirklist[i].type)
+				ec->card_desc = quirklist[i].type;
+			if (quirklist[i].init)
+				quirklist[i].init(ec);
+			break;
+		}
+
+	ec->irq = irq;
+
+	/*
+	 * hook the interrupt handlers
+	 */
+	if (slot < 8) {
+		irq_set_chip_and_handler(ec->irq, &ecard_chip,
+					 handle_level_irq);
+		irq_set_chip_data(ec->irq, ec);
+		irq_clear_status_flags(ec->irq, IRQ_NOREQUEST);
+	}
+
+#ifdef CONFIG_ARCH_RPC
+	/* On RiscPC, only first two slots have DMA capability */
+	if (slot < 2)
+		ec->dma = 2 + slot;
+#endif
+
+	for (ecp = &cards; *ecp; ecp = &(*ecp)->next);
+
+	*ecp = ec;
+	slot_to_expcard[slot] = ec;
+
+	rc = device_register(&ec->dev);
+	if (rc)
+		goto nodev;
+
+	return 0;
+
+ nodev:
+	ecard_free_card(ec);
+ nomem:
+	return rc;
+}
+
+/*
+ * Initialise the expansion card system.
+ * Locate all hardware - interrupt management and
+ * actual cards.
+ */
+static int __init ecard_init(void)
+{
+	struct task_struct *task;
+	int slot, irqbase;
+
+	irqbase = irq_alloc_descs(-1, 0, 8, -1);
+	if (irqbase < 0)
+		return irqbase;
+
+	task = kthread_run(ecard_task, NULL, "kecardd");
+	if (IS_ERR(task)) {
+		printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
+		       PTR_ERR(task));
+		irq_free_descs(irqbase, 8);
+		return PTR_ERR(task);
+	}
+
+	printk("Probing expansion cards\n");
+
+	for (slot = 0; slot < 8; slot ++) {
+		if (ecard_probe(slot, irqbase + slot, ECARD_EASI) == -ENODEV)
+			ecard_probe(slot, irqbase + slot, ECARD_IOC);
+	}
+
+	ecard_probe(8, 11, ECARD_IOC);
+
+	irq_set_chained_handler(IRQ_EXPANSIONCARD, ecard_irq_handler);
+
+	ecard_proc_init();
+
+	return 0;
+}
+
+subsys_initcall(ecard_init);
+
+/*
+ *	ECARD "bus"
+ */
+static const struct ecard_id *
+ecard_match_device(const struct ecard_id *ids, struct expansion_card *ec)
+{
+	int i;
+
+	for (i = 0; ids[i].manufacturer != 65535; i++)
+		if (ec->cid.manufacturer == ids[i].manufacturer &&
+		    ec->cid.product == ids[i].product)
+			return ids + i;
+
+	return NULL;
+}
+
+static int ecard_drv_probe(struct device *dev)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	struct ecard_driver *drv = ECARD_DRV(dev->driver);
+	const struct ecard_id *id;
+	int ret;
+
+	id = ecard_match_device(drv->id_table, ec);
+
+	ec->claimed = 1;
+	ret = drv->probe(ec, id);
+	if (ret)
+		ec->claimed = 0;
+	return ret;
+}
+
+static int ecard_drv_remove(struct device *dev)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	struct ecard_driver *drv = ECARD_DRV(dev->driver);
+
+	drv->remove(ec);
+	ec->claimed = 0;
+
+	/*
+	 * Restore the default operations.  We ensure that the
+	 * ops are set before we change the data.
+	 */
+	ec->ops = &ecard_default_ops;
+	barrier();
+	ec->irq_data = NULL;
+
+	return 0;
+}
+
+/*
+ * Before rebooting, we must make sure that the expansion card is in a
+ * sensible state, so it can be re-detected.  This means that the first
+ * page of the ROM must be visible.  We call the expansion cards reset
+ * handler, if any.
+ */
+static void ecard_drv_shutdown(struct device *dev)
+{
+	struct expansion_card *ec = ECARD_DEV(dev);
+	struct ecard_driver *drv = ECARD_DRV(dev->driver);
+	struct ecard_request req;
+
+	if (dev->driver) {
+		if (drv->shutdown)
+			drv->shutdown(ec);
+		ec->claimed = 0;
+	}
+
+	/*
+	 * If this card has a loader, call the reset handler.
+	 */
+	if (ec->loader) {
+		req.fn = ecard_task_reset;
+		req.ec = ec;
+		ecard_call(&req);
+	}
+}
+
+int ecard_register_driver(struct ecard_driver *drv)
+{
+	drv->drv.bus = &ecard_bus_type;
+
+	return driver_register(&drv->drv);
+}
+
+void ecard_remove_driver(struct ecard_driver *drv)
+{
+	driver_unregister(&drv->drv);
+}
+
+static int ecard_match(struct device *_dev, struct device_driver *_drv)
+{
+	struct expansion_card *ec = ECARD_DEV(_dev);
+	struct ecard_driver *drv = ECARD_DRV(_drv);
+	int ret;
+
+	if (drv->id_table) {
+		ret = ecard_match_device(drv->id_table, ec) != NULL;
+	} else {
+		ret = ec->cid.id == drv->id;
+	}
+
+	return ret;
+}
+
+struct bus_type ecard_bus_type = {
+	.name		= "ecard",
+	.dev_groups	= ecard_dev_groups,
+	.match		= ecard_match,
+	.probe		= ecard_drv_probe,
+	.remove		= ecard_drv_remove,
+	.shutdown	= ecard_drv_shutdown,
+};
+
+static int ecard_bus_init(void)
+{
+	return bus_register(&ecard_bus_type);
+}
+
+postcore_initcall(ecard_bus_init);
+
+EXPORT_SYMBOL(ecard_readchunk);
+EXPORT_SYMBOL(ecard_register_driver);
+EXPORT_SYMBOL(ecard_remove_driver);
+EXPORT_SYMBOL(ecard_bus_type);
diff --git a/arch/arm/mach-rpc/ecard.h b/arch/arm/mach-rpc/ecard.h
new file mode 100644
index 000000000..873dd3d9f
--- /dev/null
+++ b/arch/arm/mach-rpc/ecard.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  ecard.h
+ *
+ *  Copyright 2007 Russell King
+ */
+
+/* Definitions internal to ecard.c - for it's use only!!
+ *
+ * External expansion card header as read from the card
+ */
+struct ex_ecid {
+	unsigned char	r_irq:1;
+	unsigned char	r_zero:1;
+	unsigned char	r_fiq:1;
+	unsigned char	r_id:4;
+	unsigned char	r_a:1;
+
+	unsigned char	r_cd:1;
+	unsigned char	r_is:1;
+	unsigned char	r_w:2;
+	unsigned char	r_r1:4;
+
+	unsigned char	r_r2:8;
+
+	unsigned char	r_prod[2];
+
+	unsigned char	r_manu[2];
+
+	unsigned char	r_country;
+
+	unsigned char	r_fiqmask;
+	unsigned char	r_fiqoff[3];
+
+	unsigned char	r_irqmask;
+	unsigned char	r_irqoff[3];
+};
+
+/*
+ * Chunk directory entry as read from the card
+ */
+struct ex_chunk_dir {
+	unsigned char r_id;
+	unsigned char r_len[3];
+	unsigned long r_start;
+	union {
+		char string[256];
+		char data[1];
+	} d;
+#define c_id(x)		((x)->r_id)
+#define c_len(x)	((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
+#define c_start(x)	((x)->r_start)
+};
+
+typedef enum ecard_type {		/* Cards address space		*/
+	ECARD_IOC,
+	ECARD_MEMC,
+	ECARD_EASI
+} card_type_t;
+
+typedef enum {				/* Speed for ECARD_IOC space	*/
+	ECARD_SLOW	 = 0,
+	ECARD_MEDIUM	 = 1,
+	ECARD_FAST	 = 2,
+	ECARD_SYNC	 = 3
+} card_speed_t;
diff --git a/arch/arm/mach-rpc/fiq.S b/arch/arm/mach-rpc/fiq.S
new file mode 100644
index 000000000..0de83e9b0
--- /dev/null
+++ b/arch/arm/mach-rpc/fiq.S
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+#include <mach/entry-macro.S>
+
+	.text
+
+	.global	rpc_default_fiq_end
+ENTRY(rpc_default_fiq_start)
+	mov	r12, #ioc_base_high
+	.if	ioc_base_low
+	orr	r12, r12, #ioc_base_low
+	.endif
+	strb	r12, [r12, #0x38]	@ Disable FIQ register
+	subs	pc, lr, #4
+rpc_default_fiq_end:
diff --git a/arch/arm/mach-rpc/floppydma.S b/arch/arm/mach-rpc/floppydma.S
new file mode 100644
index 000000000..6698b8305
--- /dev/null
+++ b/arch/arm/mach-rpc/floppydma.S
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/arch/arm/lib/floppydma.S
+ *
+ *  Copyright (C) 1995, 1996 Russell King
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+		.text
+
+		.global	floppy_fiqin_end
+ENTRY(floppy_fiqin_start)
+		subs	r9, r9, #1
+		ldrbgt	r12, [r11, #-4]
+		ldrble	r12, [r11], #0
+		strb	r12, [r10], #1
+		subs	pc, lr, #4
+floppy_fiqin_end:
+
+		.global	floppy_fiqout_end
+ENTRY(floppy_fiqout_start)
+		subs	r9, r9, #1
+		ldrbge	r12, [r10], #1
+		movlt	r12, #0
+		strble	r12, [r11], #0
+		subsle	pc, lr, #4
+		strb	r12, [r11, #-4]
+		subs	pc, lr, #4
+floppy_fiqout_end:
diff --git a/arch/arm/mach-rpc/include/mach/acornfb.h b/arch/arm/mach-rpc/include/mach/acornfb.h
new file mode 100644
index 000000000..2bf18ab3d
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/acornfb.h
@@ -0,0 +1,137 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  arch/arm/mach-rpc/include/mach/acornfb.h
+ *
+ *  Copyright (C) 1999 Russell King
+ *
+ *  AcornFB architecture specific code
+ */
+
+#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
+
+static inline int
+acornfb_valid_pixrate(struct fb_var_screeninfo *var)
+{
+	u_long limit;
+
+	if (!var->pixclock)
+		return 0;
+
+	/*
+	 * Limits below are taken from RISC OS bandwidthlimit file
+	 */
+	if (current_par.using_vram) {
+		if (current_par.vram_half_sam == 2048)
+			limit = 6578;
+		else
+			limit = 13157;
+	} else {
+		limit = 26315;
+	}
+
+	return acornfb_bandwidth(var) >= limit;
+}
+
+/*
+ * Try to find the best PLL parameters for the pixel clock.
+ * This algorithm seems to give best predictable results,
+ * and produces the same values as detailed in the VIDC20
+ * data sheet.
+ */
+static inline u_int
+acornfb_vidc20_find_pll(u_int pixclk)
+{
+	u_int r, best_r = 2, best_v = 2;
+	int best_d = 0x7fffffff;
+
+	for (r = 2; r <= 32; r++) {
+		u_int rr, v, p;
+		int d;
+
+		rr = 41667 * r;
+
+		v = (rr + pixclk / 2) / pixclk;
+
+		if (v > 32 || v < 2)
+			continue;
+
+		p = (rr + v / 2) / v;
+
+		d = pixclk - p;
+
+		if (d < 0)
+			d = -d;
+
+		if (d < best_d) {
+			best_d = d;
+			best_v = v - 1;
+			best_r = r - 1;
+		}
+
+		if (d == 0)
+			break;
+	}
+
+	return best_v << 8 | best_r;
+}
+
+static inline void
+acornfb_vidc20_find_rates(struct vidc_timing *vidc,
+			  struct fb_var_screeninfo *var)
+{
+	u_int div;
+
+	/* Select pixel-clock divisor to keep PLL in range */
+	div = var->pixclock / 9090; /*9921*/
+
+	/* Limit divisor */
+	if (div == 0)
+		div = 1;
+	if (div > 8)
+		div = 8;
+
+	/* Encode divisor to VIDC20 setting */
+	switch (div) {
+	case 1:	vidc->control |= VIDC20_CTRL_PIX_CK;  break;
+	case 2:	vidc->control |= VIDC20_CTRL_PIX_CK2; break;
+	case 3:	vidc->control |= VIDC20_CTRL_PIX_CK3; break;
+	case 4:	vidc->control |= VIDC20_CTRL_PIX_CK4; break;
+	case 5:	vidc->control |= VIDC20_CTRL_PIX_CK5; break;
+	case 6:	vidc->control |= VIDC20_CTRL_PIX_CK6; break;
+	case 7:	vidc->control |= VIDC20_CTRL_PIX_CK7; break;
+	case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
+	}
+
+	/*
+	 * With VRAM, the FIFO can be set to the highest possible setting
+	 * because there are no latency considerations for other memory
+	 * accesses. However, in 64 bit bus mode the FIFO preload value
+	 * must not be set to VIDC20_CTRL_FIFO_28 because this will let
+	 * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
+	 * FIFO preload value).
+	 */
+	if (current_par.using_vram) {
+		if (current_par.vram_half_sam == 2048)
+			vidc->control |= VIDC20_CTRL_FIFO_24;
+		else
+			vidc->control |= VIDC20_CTRL_FIFO_28;
+	} else {
+		unsigned long bandwidth = acornfb_bandwidth(var);
+
+		/* Encode bandwidth as VIDC20 setting */
+		if (bandwidth > 33334)		/* < 30.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_16;
+		else if (bandwidth > 26666)	/* < 37.5MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_20;
+		else if (bandwidth > 22222)	/* < 45.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_24;
+		else				/* > 45.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_28;
+	}
+
+	/* Find the PLL values */
+	vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
+}
+
+#define acornfb_default_control()	(VIDC20_CTRL_PIX_VCLK)
+#define acornfb_default_econtrol()	(VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
new file mode 100644
index 000000000..a6d1a9f4b
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/entry-macro.S
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #ioc_base_high		@ point at IOC
+	.if	ioc_base_low
+	orr	\base, \base, #ioc_base_low
+	.endif
+	.endm
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
new file mode 100644
index 000000000..6f197706f
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  arch/arm/mach-rpc/include/mach/hardware.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ *  This file contains the hardware definitions of the RiscPC series machines.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RPC_RAM_SIZE		0x10000000
+#define RPC_RAM_START		0x10000000
+
+#define EASI_SIZE		0x08000000	/* EASI I/O */
+#define EASI_START		0x08000000
+#define EASI_BASE		IOMEM(0xe5000000)
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define UNCACHEABLE_ADDR	(FLUSH_BASE + 0x10000)
+
+/*
+ * IO Addresses
+ */
+#define ECARD_EASI_BASE		(EASI_BASE)
+#define VIDC_BASE		(IO_BASE + 0x00400000)
+#define EXPMASK_BASE		(IO_BASE + 0x00360000)
+#define ECARD_IOC4_BASE		(IO_BASE + 0x00270000)
+#define ECARD_IOC_BASE		(IO_BASE + 0x00240000)
+#define IOMD_BASE		(IO_BASE + 0x00200000)
+#define IOC_BASE		(IO_BASE + 0x00200000)
+#define ECARD_MEMC8_BASE	(IO_BASE + 0x0002b000)
+#define FLOPPYDMA_BASE		(IO_BASE + 0x0002a000)
+#define PCIO_BASE		(IO_BASE + 0x00010000)
+#define ECARD_MEMC_BASE		(IO_BASE + 0x00000000)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+#define NETSLOT_BASE		0x0302b000
+#define NETSLOT_SIZE		0x00001000
+
+#define PODSLOT_IOC0_BASE	0x03240000
+#define PODSLOT_IOC4_BASE	0x03270000
+#define PODSLOT_IOC_SIZE	(1 << 14)
+#define PODSLOT_MEMC_BASE	0x03000000
+#define PODSLOT_MEMC_SIZE	(1 << 14)
+#define PODSLOT_EASI_BASE	0x08000000
+#define PODSLOT_EASI_SIZE	(1 << 24)
+
+#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
+#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h
new file mode 100644
index 000000000..8a8f28406
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/io.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  arch/arm/mach-rpc/include/mach/io.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * We need PC style IO addressing for:
+ *  - floppy (at 0x3f2,0x3f4,0x3f5,0x3f7)
+ *  - parport (at 0x278-0x27a, 0x27b-0x27f, 0x778-0x77a)
+ *  - 8250 serial (only for compile)
+ *
+ * These peripherals are found in an area of MMIO which looks very much
+ * like an ISA bus, but with registers at the low byte of each word.
+ */
+#define __io(a)		(PCIO_BASE + ((a) << 2))
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
new file mode 100644
index 000000000..0c3428fd9
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  arch/arm/mach-rpc/include/mach/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ */
+
+#define IRQ_PRINTER		0
+#define IRQ_BATLOW		1
+#define IRQ_FLOPPYINDEX		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_IMMEDIATE		7
+#define IRQ_EXPCARDFIQ		8
+#define IRQ_HARDDISK		9
+#define IRQ_SERIALPORT		10
+#define IRQ_FLOPPYDISK		12
+#define IRQ_EXPANSIONCARD	13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define FIQ_FLOPPYDATA		0
+#define FIQ_ECONET		2
+#define FIQ_SERIALPORT		4
+#define FIQ_EXPANSIONCARD	6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define NR_IRQS			128
diff --git a/arch/arm/mach-rpc/include/mach/isa-dma.h b/arch/arm/mach-rpc/include/mach/isa-dma.h
new file mode 100644
index 000000000..d9c3af1ef
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/isa-dma.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  arch/arm/mach-rpc/include/mach/isa-dma.h
+ *
+ *  Copyright (C) 1997 Russell King
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_CHANNELS	8
+
+#define DMA_0			0
+#define DMA_1			1
+#define DMA_2			2
+#define DMA_3			3
+#define DMA_S0			4
+#define DMA_S1			5
+#define DMA_VIRTUAL_FLOPPY	6
+#define DMA_VIRTUAL_SOUND	7
+
+#define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
+
+#define IOMD_DMA_BOUNDARY	(PAGE_SIZE - 1)
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
new file mode 100644
index 000000000..a586eb31b
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
+ *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x00000000
+#define FLUSH_BASE		0xdf000000
+
+/*
+ * Sparsemem support.  Each section is a maximum of 64MB.  The sections
+ * are offset by 128MB and can cover 128MB, so that gives us a maximum
+ * of 29 physmem bits.
+ */
+#define MAX_PHYSMEM_BITS	29
+#define SECTION_SIZE_BITS	26
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
new file mode 100644
index 000000000..1fbe7eb95
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  arch/arm/mach-rpc/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996 Russell King
+ */
+#define VIDMEM ((char *)SCREEN_START)
+ 
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+int video_size_row;
+unsigned char bytes_per_char_h;
+extern unsigned long con_charconvtable[256];
+
+struct param_struct {
+	unsigned long page_size;
+	unsigned long nr_pages;
+	unsigned long ramdisk_size;
+	unsigned long mountrootrdonly;
+	unsigned long rootdev;
+	unsigned long video_num_cols;
+	unsigned long video_num_rows;
+	unsigned long video_x;
+	unsigned long video_y;
+	unsigned long memc_control_reg;
+	unsigned char sounddefault;
+	unsigned char adfsdrives;
+	unsigned char bytes_per_char_h;
+	unsigned char bytes_per_char_v;
+	unsigned long unused[256/4-11];
+};
+
+static const unsigned long palette_4[16] = {
+	0x00000000,
+	0x000000cc,
+	0x0000cc00,             /* Green   */
+	0x0000cccc,             /* Yellow  */
+	0x00cc0000,             /* Blue    */
+	0x00cc00cc,             /* Magenta */
+	0x00cccc00,             /* Cyan    */
+	0x00cccccc,             /* White   */
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff
+};
+
+#define palette_setpixel(p)	*(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
+#define palette_write(v)	*(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
+
+/*
+ * params_phys is a linker defined symbol - see
+ * arch/arm/boot/compressed/Makefile
+ */
+extern __attribute__((pure)) struct param_struct *params(void);
+#define params (params())
+
+#ifndef STANDALONE_DEBUG 
+unsigned long video_num_cols;
+unsigned long video_num_rows;
+unsigned long video_x;
+unsigned long video_y;
+unsigned char bytes_per_char_v;
+int white;
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	extern void ll_write_char(char *, char c, char white);
+	int x,y;
+	char *ptr;
+
+	x = video_x;
+	y = video_y;
+
+	if (c == '\n') {
+		if (++y >= video_num_rows)
+			y--;
+	} else if (c == '\r') {
+		x = 0;
+	} else {
+		ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
+		ll_write_char(ptr, c, white);
+		if (++x >= video_num_cols) {
+			x = 0;
+			if ( ++y >= video_num_rows ) {
+				y--;
+			}
+		}
+	}
+
+	video_x = x;
+	video_y = y;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Setup for decompression
+ */
+static void arch_decomp_setup(void)
+{
+	int i;
+	struct tag *t = (struct tag *)params;
+	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
+
+	if (t->hdr.tag == ATAG_CORE) {
+		for (; t->hdr.size; t = tag_next(t)) {
+			if (t->hdr.tag == ATAG_VIDEOTEXT) {
+				video_num_rows = t->u.videotext.video_lines;
+				video_num_cols = t->u.videotext.video_cols;
+				video_x = t->u.videotext.x;
+				video_y = t->u.videotext.y;
+			} else if (t->hdr.tag == ATAG_VIDEOLFB) {
+				bytes_per_char_h = t->u.videolfb.lfb_depth;
+				bytes_per_char_v = 8;
+			} else if (t->hdr.tag == ATAG_MEM) {
+				page_size = PAGE_SIZE;
+				nr_pages += (t->u.mem.size / PAGE_SIZE);
+			}
+		}
+	} else {
+		nr_pages = params->nr_pages;
+		page_size = params->page_size;
+		video_num_rows = params->video_num_rows;
+		video_num_cols = params->video_num_cols;
+		video_x = params->video_x;
+		video_y = params->video_y;
+		bytes_per_char_h = params->bytes_per_char_h;
+		bytes_per_char_v = params->bytes_per_char_v;
+	}
+
+	video_size_row = video_num_cols * bytes_per_char_h;
+	
+	if (bytes_per_char_h == 4)
+		for (i = 0; i < 256; i++)
+			con_charconvtable[i] =
+				(i & 128 ? 1 << 0  : 0) |
+				(i & 64  ? 1 << 4  : 0) |
+				(i & 32  ? 1 << 8  : 0) |
+				(i & 16  ? 1 << 12 : 0) |
+				(i & 8   ? 1 << 16 : 0) |
+				(i & 4   ? 1 << 20 : 0) |
+				(i & 2   ? 1 << 24 : 0) |
+				(i & 1   ? 1 << 28 : 0);
+	else
+		for (i = 0; i < 16; i++)
+			con_charconvtable[i] =
+				(i & 8   ? 1 << 0  : 0) |
+				(i & 4   ? 1 << 8  : 0) |
+				(i & 2   ? 1 << 16 : 0) |
+				(i & 1   ? 1 << 24 : 0);
+
+
+	palette_setpixel(0);
+	if (bytes_per_char_h == 1) {
+		palette_write (0);
+		palette_write (0x00ffffff);
+		for (i = 2; i < 256; i++)
+			palette_write (0);
+		white = 1;
+	} else {
+		for (i = 0; i < 256; i++)
+			palette_write (i < 16 ? palette_4[i] : 0);
+		white = 7;
+	}
+
+	if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
+}
+#endif
diff --git a/arch/arm/mach-rpc/io-acorn.S b/arch/arm/mach-rpc/io-acorn.S
new file mode 100644
index 000000000..b9082a2a2
--- /dev/null
+++ b/arch/arm/mach-rpc/io-acorn.S
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  linux/arch/arm/lib/io-acorn.S
+ *
+ *  Copyright (C) 1995, 1996 Russell King
+ *
+ * 27/03/03 Ian Molton Clean up CONFIG_CPU
+ */
+#include <linux/linkage.h>
+#include <linux/kern_levels.h>
+#include <asm/assembler.h>
+
+		.text
+		.align
+
+.Liosl_warning:
+		.ascii	KERN_WARNING "insl/outsl not implemented, called from %08lX\0"
+		.align
+
+/*
+ * These make no sense on Acorn machines.
+ * Print a warning message.
+ */
+ENTRY(insl)
+ENTRY(outsl)
+		adr	r0, .Liosl_warning
+		mov	r1, lr
+		b	printk
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
new file mode 100644
index 000000000..803aeb126
--- /dev/null
+++ b/arch/arm/mach-rpc/irq.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+#include <asm/hardware/iomd.h>
+#include <asm/irq.h>
+#include <asm/fiq.h>
+
+// These are offsets from the stat register for each IRQ bank
+#define STAT	0x00
+#define REQ	0x04
+#define CLR	0x04
+#define MASK	0x08
+
+static void __iomem *iomd_get_base(struct irq_data *d)
+{
+	void *cd = irq_data_get_irq_chip_data(d);
+
+	return (void __iomem *)(unsigned long)cd;
+}
+
+static void iomd_set_base_mask(unsigned int irq, void __iomem *base, u32 mask)
+{
+	struct irq_data *d = irq_get_irq_data(irq);
+
+	d->mask = mask;
+	irq_set_chip_data(irq, (void *)(unsigned long)base);
+}
+
+static void iomd_irq_mask_ack(struct irq_data *d)
+{
+	void __iomem *base = iomd_get_base(d);
+	unsigned int val, mask = d->mask;
+
+	val = readb(base + MASK);
+	writeb(val & ~mask, base + MASK);
+	writeb(mask, base + CLR);
+}
+
+static void iomd_irq_mask(struct irq_data *d)
+{
+	void __iomem *base = iomd_get_base(d);
+	unsigned int val, mask = d->mask;
+
+	val = readb(base + MASK);
+	writeb(val & ~mask, base + MASK);
+}
+
+static void iomd_irq_unmask(struct irq_data *d)
+{
+	void __iomem *base = iomd_get_base(d);
+	unsigned int val, mask = d->mask;
+
+	val = readb(base + MASK);
+	writeb(val | mask, base + MASK);
+}
+
+static struct irq_chip iomd_chip_clr = {
+	.irq_mask_ack	= iomd_irq_mask_ack,
+	.irq_mask	= iomd_irq_mask,
+	.irq_unmask	= iomd_irq_unmask,
+};
+
+static struct irq_chip iomd_chip_noclr = {
+	.irq_mask	= iomd_irq_mask,
+	.irq_unmask	= iomd_irq_unmask,
+};
+
+extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
+
+void __init rpc_init_irq(void)
+{
+	unsigned int irq, clr, set;
+
+	iomd_writeb(0, IOMD_IRQMASKA);
+	iomd_writeb(0, IOMD_IRQMASKB);
+	iomd_writeb(0, IOMD_FIQMASK);
+	iomd_writeb(0, IOMD_DMAMASK);
+
+	set_fiq_handler(&rpc_default_fiq_start,
+		&rpc_default_fiq_end - &rpc_default_fiq_start);
+
+	for (irq = 0; irq < NR_IRQS; irq++) {
+		clr = IRQ_NOREQUEST;
+		set = 0;
+
+		if (irq <= 6 || (irq >= 9 && irq <= 15))
+			clr |= IRQ_NOPROBE;
+
+		if (irq == 21 || (irq >= 16 && irq <= 19) ||
+		    irq == IRQ_KEYBOARDTX)
+			set |= IRQ_NOAUTOEN;
+
+		switch (irq) {
+		case 0 ... 7:
+			irq_set_chip_and_handler(irq, &iomd_chip_clr,
+						 handle_level_irq);
+			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATA,
+					   BIT(irq));
+			break;
+
+		case 8 ... 15:
+			irq_set_chip_and_handler(irq, &iomd_chip_noclr,
+						 handle_level_irq);
+			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_IRQSTATB,
+					   BIT(irq - 8));
+			break;
+
+		case 16 ... 21:
+			irq_set_chip_and_handler(irq, &iomd_chip_noclr,
+						 handle_level_irq);
+			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_DMASTAT,
+					   BIT(irq - 16));
+			break;
+
+		case 64 ... 71:
+			irq_set_chip(irq, &iomd_chip_noclr);
+			irq_modify_status(irq, clr, set);
+			iomd_set_base_mask(irq, IOMD_BASE + IOMD_FIQSTAT,
+					   BIT(irq - 64));
+			break;
+		}
+	}
+
+	init_FIQ(FIQ_START);
+}
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
new file mode 100644
index 000000000..d23970bd6
--- /dev/null
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/mach-rpc/riscpc.c
+ *
+ *  Copyright (C) 1998-2001 Russell King
+ *
+ *  Architecture specific fixups.
+ */
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/device.h>
+#include <linux/serial_8250.h>
+#include <linux/ata_platform.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/reboot.h>
+
+#include <asm/elf.h>
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/page.h>
+#include <asm/domain.h>
+#include <asm/setup.h>
+#include <asm/system_misc.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+extern void rpc_init_irq(void);
+
+unsigned int vram_size;
+unsigned int memc_ctrl_reg;
+unsigned int number_mfm_drives;
+
+static int __init parse_tag_acorn(const struct tag *tag)
+{
+	memc_ctrl_reg = tag->u.acorn.memc_control_reg;
+	number_mfm_drives = tag->u.acorn.adfsdrives;
+
+	switch (tag->u.acorn.vram_pages) {
+	case 512:
+		vram_size += PAGE_SIZE * 256;
+		fallthrough;	/* ??? */
+	case 256:
+		vram_size += PAGE_SIZE * 256;
+	default:
+		break;
+	}
+#if 0
+	if (vram_size) {
+		desc->video_start = 0x02000000;
+		desc->video_end   = 0x02000000 + vram_size;
+	}
+#endif
+	return 0;
+}
+
+__tagtable(ATAG_ACORN, parse_tag_acorn);
+
+static struct map_desc rpc_io_desc[] __initdata = {
+ 	{	/* VRAM		*/
+		.virtual	=  SCREEN_BASE,
+		.pfn		= __phys_to_pfn(SCREEN_START),
+		.length		= 	2*1048576,
+		.type		= MT_DEVICE
+	}, {	/* IO space	*/
+		.virtual	=  (u32)IO_BASE,
+		.pfn		= __phys_to_pfn(IO_START),
+		.length		= 	IO_SIZE	 ,
+		.type		= MT_DEVICE
+	}, {	/* EASI space	*/
+		.virtual	= (unsigned long)EASI_BASE,
+		.pfn		= __phys_to_pfn(EASI_START),
+		.length		= EASI_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init rpc_map_io(void)
+{
+	iotable_init(rpc_io_desc, ARRAY_SIZE(rpc_io_desc));
+
+	/*
+	 * Turn off floppy.
+	 */
+	writeb(0xc, PCIO_BASE + (0x3f2 << 2));
+
+	/*
+	 * RiscPC can't handle half-word loads and stores
+	 */
+	elf_hwcap &= ~HWCAP_HALF;
+}
+
+static struct resource acornfb_resources[] = {
+	/* VIDC */
+	DEFINE_RES_MEM(0x03400000, 0x00200000),
+	DEFINE_RES_IRQ(IRQ_VSYNCPULSE),
+};
+
+static struct platform_device acornfb_device = {
+	.name			= "acornfb",
+	.id			= -1,
+	.dev			= {
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources		= ARRAY_SIZE(acornfb_resources),
+	.resource		= acornfb_resources,
+};
+
+static struct resource iomd_resources[] = {
+	DEFINE_RES_MEM(0x03200000, 0x10000),
+};
+
+static struct platform_device iomd_device = {
+	.name			= "iomd",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(iomd_resources),
+	.resource		= iomd_resources,
+};
+
+static struct resource iomd_kart_resources[] = {
+	DEFINE_RES_IRQ(IRQ_KEYBOARDRX),
+	DEFINE_RES_IRQ(IRQ_KEYBOARDTX),
+};
+
+static struct platform_device kbd_device = {
+	.name			= "kart",
+	.id			= -1,
+	.dev			= {
+		.parent 	= &iomd_device.dev,
+	},
+	.num_resources		= ARRAY_SIZE(iomd_kart_resources),
+	.resource		= iomd_kart_resources,
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.mapbase	= 0x03010fe0,
+		.irq		= IRQ_SERIALPORT,
+		.uartclk	= 1843200,
+		.regshift	= 2,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_SKIP_TEST,
+	},
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static struct pata_platform_info pata_platform_data = {
+	.ioport_shift		= 2,
+};
+
+static struct resource pata_resources[] = {
+	DEFINE_RES_MEM(0x030107c0, 0x20),
+	DEFINE_RES_MEM(0x03010fd8, 0x04),
+	DEFINE_RES_IRQ(IRQ_HARDDISK),
+};
+
+static struct platform_device pata_device = {
+	.name			= "pata_platform",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(pata_resources),
+	.resource		= pata_resources,
+	.dev			= {
+		.platform_data	= &pata_platform_data,
+		.coherent_dma_mask = ~0,	/* grumble */
+	},
+};
+
+static struct platform_device *devs[] __initdata = {
+	&iomd_device,
+	&kbd_device,
+	&serial_device,
+	&acornfb_device,
+	&pata_device,
+};
+
+static struct i2c_board_info i2c_rtc = {
+	I2C_BOARD_INFO("pcf8583", 0x50)
+};
+
+static int __init rpc_init(void)
+{
+	i2c_register_board_info(0, &i2c_rtc, 1);
+	return platform_add_devices(devs, ARRAY_SIZE(devs));
+}
+
+arch_initcall(rpc_init);
+
+static void rpc_restart(enum reboot_mode mode, const char *cmd)
+{
+	iomd_writeb(0, IOMD_ROMCR0);
+
+	/*
+	 * Jump into the ROM
+	 */
+	soft_restart(0);
+}
+
+void ioc_timer_init(void);
+
+MACHINE_START(RISCPC, "Acorn-RiscPC")
+	/* Maintainer: Russell King */
+	.atag_offset	= 0x100,
+	.reserve_lp0	= 1,
+	.reserve_lp1	= 1,
+	.map_io		= rpc_map_io,
+	.init_irq	= rpc_init_irq,
+	.init_time	= ioc_timer_init,
+	.restart	= rpc_restart,
+MACHINE_END
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
new file mode 100644
index 000000000..da85cac76
--- /dev/null
+++ b/arch/arm/mach-rpc/time.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  linux/arch/arm/common/time-acorn.c
+ *
+ *  Copyright (c) 1996-2000 Russell King.
+ *
+ *  Changelog:
+ *   24-Sep-1996	RMK	Created
+ *   10-Oct-1996	RMK	Brought up to date with arch-sa110eval
+ *   04-Dec-1997	RMK	Updated for new arch/arm/time.c
+ *   13=Jun-2004	DS	Moved to arch/arm/common b/c shared w/CLPS7500
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <asm/hardware/ioc.h>
+
+#include <asm/mach/time.h>
+
+#define RPC_CLOCK_FREQ 2000000
+#define RPC_LATCH DIV_ROUND_CLOSEST(RPC_CLOCK_FREQ, HZ)
+
+static u32 ioc_time;
+
+static u64 ioc_timer_read(struct clocksource *cs)
+{
+	unsigned int count1, count2, status;
+	unsigned long flags;
+	u32 ticks;
+
+	local_irq_save(flags);
+	ioc_writeb (0, IOC_T0LATCH);
+	barrier ();
+	count1 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
+	barrier ();
+	status = ioc_readb(IOC_IRQREQA);
+	barrier ();
+	ioc_writeb (0, IOC_T0LATCH);
+	barrier ();
+	count2 = ioc_readb(IOC_T0CNTL) | (ioc_readb(IOC_T0CNTH) << 8);
+	ticks = ioc_time + RPC_LATCH - count2;
+	local_irq_restore(flags);
+
+	if (count2 < count1) {
+		/*
+		 * The timer has not reloaded between reading count1 and
+		 * count2, check whether an interrupt was actually pending.
+		 */
+		if (status & (1 << 5))
+			ticks += RPC_LATCH;
+	} else if (count2 > count1) {
+		/*
+		 * The timer has reloaded, so count2 indicates the new
+		 * count since the wrap.  The interrupt would not have
+		 * been processed, so add the missed ticks.
+		 */
+		ticks += RPC_LATCH;
+	}
+
+	return ticks;
+}
+
+static struct clocksource ioctime_clocksource = {
+	.read = ioc_timer_read,
+	.mask = CLOCKSOURCE_MASK(32),
+	.rating = 100,
+};
+
+void __init ioctime_init(void)
+{
+	ioc_writeb(RPC_LATCH & 255, IOC_T0LTCHL);
+	ioc_writeb(RPC_LATCH >> 8, IOC_T0LTCHH);
+	ioc_writeb(0, IOC_T0GO);
+}
+
+static irqreturn_t
+ioc_timer_interrupt(int irq, void *dev_id)
+{
+	ioc_time += RPC_LATCH;
+	timer_tick();
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt.
+ */
+void __init ioc_timer_init(void)
+{
+	WARN_ON(clocksource_register_hz(&ioctime_clocksource, RPC_CLOCK_FREQ));
+	ioctime_init();
+	if (request_irq(IRQ_TIMER0, ioc_timer_interrupt, 0, "timer", NULL))
+		pr_err("Failed to request irq %d (timer)\n", IRQ_TIMER0);
+}