Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 350 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c/Kconfig.s3c64xx b/arch/arm/mach-s3c/Kconfig.s3c64xx
new file mode 100644
index 000000000..f3fcb570e
--- /dev/null
+++ b/arch/arm/mach-s3c/Kconfig.s3c64xx
@@ -0,0 +1,350 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright 2008 Openmoko, Inc.
+#	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
+
+menuconfig ARCH_S3C64XX
+	bool "Samsung S3C64XX"
+	depends on ARCH_MULTI_V6
+	select ARM_AMBA
+	select ARM_VIC
+	select CLKSRC_SAMSUNG_PWM
+	select COMMON_CLK_SAMSUNG
+	select GPIO_SAMSUNG if ATAGS
+	select GPIOLIB
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_TCM
+	select PLAT_SAMSUNG
+	select PM_GENERIC_DOMAINS if PM
+	select S3C_DEV_NAND if ATAGS
+	select S3C_GPIO_TRACK if ATAGS
+	select S3C2410_WATCHDOG
+	select SAMSUNG_ATAGS if ATAGS
+	select SAMSUNG_WAKEMASK if PM
+	select WATCHDOG
+	help
+	  Samsung S3C64XX series based systems
+
+if ARCH_S3C64XX
+
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+	bool
+	help
+	  Enable S3C6400 CPU support
+
+config CPU_S3C6410
+	bool
+	help
+	  Enable S3C6410 CPU support
+
+config S3C64XX_PL080
+	def_bool DMADEVICES
+	select AMBA_PL08X
+
+config S3C64XX_SETUP_SDHCI
+	bool
+	select S3C64XX_SETUP_SDHCI_GPIO
+	help
+	  Internal configuration for default SDHCI setup for S3C6400 and
+	  S3C6410 SoCs.
+
+config S3C64XX_DEV_ONENAND1
+	bool
+	help
+	  Compile in platform device definition for OneNAND1 controller
+
+config SAMSUNG_DEV_BACKLIGHT
+	bool
+	depends on SAMSUNG_DEV_PWM
+	help
+	  Compile in platform device definition LCD backlight with PWM Timer
+
+# platform specific device setup
+
+config S3C64XX_SETUP_I2C0
+	bool
+	default y
+	help
+	  Common setup code for i2c bus 0.
+
+	  Note, currently since i2c0 is always compiled, this setup helper
+	  is always compiled with it.
+
+config S3C64XX_SETUP_I2C1
+	bool
+	help
+	  Common setup code for i2c bus 1.
+
+config S3C64XX_SETUP_IDE
+	bool
+	help
+	  Common setup code for S3C64XX IDE.
+
+config S3C64XX_SETUP_FB_24BPP
+	bool
+	help
+	  Common setup code for S3C64XX with an 24bpp RGB display helper.
+
+config S3C64XX_SETUP_KEYPAD
+	bool
+	help
+	  Common setup code for S3C64XX KEYPAD GPIO configurations
+
+config S3C64XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for S3C64XX SDHCI GPIO configurations
+
+config S3C64XX_SETUP_SPI
+	bool
+	help
+	 Common setup code for SPI GPIO configurations
+
+config S3C64XX_SETUP_USB_PHY
+	bool
+	help
+	  Common setup code for USB PHY controller
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+       bool "SMDK6400"
+	depends on ATAGS
+	select CPU_S3C6400
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_HSMMC1
+	help
+	  Machine support for the Samsung SMDK6400
+
+# S3C6410 machine support
+
+config MACH_ANW6410
+	bool "A&W6410"
+	depends on ATAGS
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_FB
+	help
+	  Machine support for the A&W6410
+
+config MACH_MINI6410
+	bool "MINI6410"
+	depends on ATAGS
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	help
+	  Machine support for the FriendlyARM MINI6410
+
+config MACH_REAL6410
+	bool "REAL6410"
+	depends on ATAGS
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_TS
+	help
+	  Machine support for the CoreWind REAL6410
+
+config MACH_SMDK6410
+	bool "SMDK6410"
+	depends on ATAGS
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_IDE
+	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_IDE
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
+	select SAMSUNG_DEV_TS
+	help
+	  Machine support for the Samsung SMDK6410
+
+# At least some of the SMDK6410s were shipped with the card detect
+# for the MMC/SD slots connected to the same input. This means that
+# either the boards need to be altered to have channel0 to an alternate
+# configuration or that only one slot can be used.
+
+choice
+	prompt "SMDK6410 MMC/SD slot setup"
+	depends on MACH_SMDK6410
+
+config SMDK6410_SD_CH0
+	bool "Use channel 0 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON7 (channel 0) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+config SMDK6410_SD_CH1
+	bool "Use channel 1 only"
+	depends on MACH_SMDK6410
+	help
+          Select CON6 (channel 1) as the MMC/SD slot, as
+	  at least some SMDK6410 boards come with the
+	  resistors fitted so that the card detects for
+	  channels 0 and 1 are the same.
+
+endchoice
+
+config SMDK6410_WM1190_EV1
+	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	depends on I2C=y
+	select MFD_WM8350_I2C
+	select REGULATOR
+	select REGULATOR_WM8350
+	help
+	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+	  and audio daughtercard for the Samsung SMDK6410 reference
+	  platform.  Enabling this option will build support for this
+	  module into the kernel.  The presence of the module will be
+	  detected at runtime so the resulting kernel can be used
+	  with or without the 1190-EV1 fitted.
+
+config SMDK6410_WM1192_EV1
+	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
+	depends on MACH_SMDK6410
+	depends on I2C=y
+	select MFD_WM831X
+	select MFD_WM831X_I2C
+	select REGULATOR
+	select REGULATOR_WM831X
+	help
+	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
+	  daughtercard for the Samsung SMDK6410 reference platform.
+	  Enabling this option will build support for this module into
+	  the kernel.  The presence of the daughtercard will be
+	  detected at runtime so the resulting kernel can be used
+	  with or without the 1192-EV1 fitted.
+
+config MACH_NCP
+	bool "NCP"
+	depends on ATAGS
+	select CPU_S3C6410
+	select S3C64XX_SETUP_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
+	help
+          Machine support for the Samsung NCP
+
+config MACH_HMT
+	bool "Airgoo HMT"
+	depends on ATAGS
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_FB
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
+	select SAMSUNG_DEV_PWM
+	help
+	  Machine support for the Airgoo HMT
+
+config MACH_SMARTQ
+	bool
+	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HWMON
+	select S3C_DEV_RTC
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_PWM
+	select SAMSUNG_DEV_TS
+	help
+	    Shared machine support for SmartQ 5/7
+
+config MACH_SMARTQ5
+	bool "SmartQ 5"
+	depends on ATAGS
+	select MACH_SMARTQ
+	help
+	    Machine support for the SmartQ 5
+
+config MACH_SMARTQ7
+	bool "SmartQ 7"
+	depends on ATAGS
+	select MACH_SMARTQ
+	help
+	    Machine support for the SmartQ 7
+
+config MACH_WLF_CRAGG_6410
+	bool "Wolfson Cragganmore 6410"
+	depends on ATAGS
+	depends on I2C=y
+	select CPU_S3C6410
+	select LEDS_GPIO_REGISTER
+	select S3C64XX_DEV_SPI0
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_IDE
+	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_SPI
+	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_FB
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
+	help
+	  Machine support for the Wolfson Cragganmore S3C6410 variant.
+
+config MACH_S3C64XX_DT
+	bool "Samsung S3C6400/S3C6410 machine using Device Tree"
+	select CPU_S3C6400
+	select CPU_S3C6410
+	select PINCTRL
+	select PINCTRL_S3C64XX
+	help
+	  Machine support for Samsung S3C6400/S3C6410 machines with Device Tree
+	  enabled.
+	  Select this if a fdt blob is available for your S3C64XX SoC based
+	  board.
+	  Note: This is under development and not all peripherals can be
+	  supported with this machine file.
+
+endif