Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 170 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c/pm-s3c2410.c b/arch/arm/mach-s3c/pm-s3c2410.c
new file mode 100644
index 000000000..a66419883
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-s3c2410.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "gpio-cfg.h"
+#include "cpu.h"
+#include "pm.h"
+
+#include "h1940.h"
+
+static void s3c2410_pm_prepare(void)
+{
+	/* ensure at least GSTATUS3 has the resume address */
+
+	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2410_GSTATUS3);
+
+	S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+	S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+
+	if (machine_is_h1940()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
+
+		/* generate check for the bootloader to check on resume */
+
+		for (ptr = 0; ptr < 0x40000; ptr += 0x400)
+			calc += __raw_readl(base+ptr);
+
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+	}
+
+	/* RX3715 and RX1950 use similar to H1940 code and the
+	 * same offsets for resume and checksum pointers */
+
+	if (machine_is_rx3715() || machine_is_rx1950()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
+
+		/* generate check for the bootloader to check on resume */
+
+		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+			calc += __raw_readl(base+ptr);
+
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+	}
+
+	if (machine_is_aml_m5900()) {
+		gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL);
+		gpio_free(S3C2410_GPF(2));
+	}
+
+	if (machine_is_rx1950()) {
+		/* According to S3C2442 user's manual, page 7-17,
+		 * when the system is operating in NAND boot mode,
+		 * the hardware pin configuration - EINT[23:21] –
+		 * must be set as input for starting up after
+		 * wakeup from sleep mode
+		 */
+		s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
+	}
+}
+
+static void s3c2410_pm_resume(void)
+{
+	unsigned long tmp;
+
+	/* unset the return-from-sleep flag, to ensure reset */
+
+	tmp = __raw_readl(S3C2410_GSTATUS2);
+	tmp &= S3C2410_GSTATUS2_OFFRESET;
+	__raw_writel(tmp, S3C2410_GSTATUS2);
+
+	if (machine_is_aml_m5900()) {
+		gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+		gpio_free(S3C2410_GPF(2));
+	}
+}
+
+struct syscore_ops s3c2410_pm_syscore_ops = {
+	.resume		= s3c2410_pm_resume,
+};
+
+static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
+{
+	pm_cpu_prep = s3c2410_pm_prepare;
+	pm_cpu_sleep = s3c2410_cpu_suspend;
+
+	return 0;
+}
+
+#if defined(CONFIG_CPU_S3C2410)
+static struct subsys_interface s3c2410_pm_interface = {
+	.name		= "s3c2410_pm",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+/* register ourselves */
+
+static int __init s3c2410_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2410_pm_interface);
+}
+
+arch_initcall(s3c2410_pm_drvinit);
+
+static struct subsys_interface s3c2410a_pm_interface = {
+	.name		= "s3c2410a_pm",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2410a_pm_interface);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct subsys_interface s3c2440_pm_interface = {
+	.name		= "s3c2440_pm",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+static int __init s3c2440_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2440_pm_interface);
+}
+
+arch_initcall(s3c2440_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2442)
+static struct subsys_interface s3c2442_pm_interface = {
+	.name		= "s3c2442_pm",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+static int __init s3c2442_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2442_pm_interface);
+}
+
+arch_initcall(s3c2442_pm_drvinit);
+#endif