Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 1580 insertions, 0 deletions

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
new file mode 100644
index 000000000..272670ef1
--- /dev/null
+++ b/arch/arm/plat-omap/Kconfig
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
+config ARCH_OMAP
+	bool
+
+if ARCH_OMAP
+
+menu "TI OMAP Common Features"
+
+config ARCH_OMAP_OTG
+	bool
+
+comment "OMAP Feature Selections"
+
+config OMAP_DEBUG_DEVICES
+	bool
+	help
+	  For debug cards on TI reference boards.
+
+config OMAP_DEBUG_LEDS
+	def_bool y if NEW_LEDS
+	depends on OMAP_DEBUG_DEVICES
+	select LEDS_CLASS
+
+config POWER_AVS_OMAP
+	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
+	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+	select POWER_SUPPLY
+	help
+	  Say Y to enable AVS(Adaptive Voltage Scaling)
+	  support on OMAP containing the version 1 or
+	  version 2 of the SmartReflex IP.
+	  V1 is the 65nm version used in OMAP3430.
+	  V2 is the update for the 45nm version of the IP used in OMAP3630
+	  and OMAP4430
+
+	  Please note, that by default SmartReflex is only
+	  initialized and not enabled. To enable the automatic voltage
+	  compensation for vdd mpu and vdd core from user space,
+	  user must write 1 to
+		/debug/smartreflex/sr_<X>/autocomp,
+	  where X is mpu_iva or core for OMAP3.
+	  Optionally autocompensation can be enabled in the kernel
+	  by default during system init via the enable_on_init flag
+	  which an be passed as platform data to the smartreflex driver.
+
+config POWER_AVS_OMAP_CLASS3
+	bool "Class 3 mode of Smartreflex Implementation"
+	depends on POWER_AVS_OMAP && TWL4030_CORE
+	help
+	  Say Y to enable Class 3 implementation of Smartreflex
+
+	  Class 3 implementation of Smartreflex employs continuous hardware
+	  voltage calibration.
+
+config OMAP_RESET_CLOCKS
+	bool "Reset unused clocks during boot"
+	depends on ARCH_OMAP
+	help
+	  Say Y if you want to reset unused clocks during boot.
+	  This option saves power, but assumes all drivers are
+	  using the clock framework. Broken drivers that do not
+	  yet use clock framework may not work with this option.
+	  If you are booting from another operating system, you
+	  probably do not want this option enabled until your
+	  device drivers work properly.
+
+config OMAP_MPU_TIMER
+	bool "Use mpu timer"
+	depends on ARCH_OMAP1
+	help
+	  Select this option if you want to use the OMAP mpu timer. This
+	  timer provides more intra-tick resolution than the 32KHz timer,
+	  but consumes more power.
+
+config OMAP_32K_TIMER
+	bool "Use 32KHz timer"
+	depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS
+	default y if (ARCH_OMAP16XX || ARCH_OMAP2PLUS)
+	help
+	  Select this option if you want to enable the OMAP 32KHz timer.
+	  This timer saves power compared to the OMAP_MPU_TIMER, and has
+	  support for no tick during idle. The 32KHz timer provides less
+	  intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
+	  currently only available for OMAP16XX, 24XX, 34XX, OMAP4/5 and DRA7XX.
+
+	  On OMAP2PLUS this value is only used for CONFIG_HZ and
+	  CLOCK_TICK_RATE compile time calculation.
+	  The actual timer selection is done in the board file
+	  through the (DT_)MACHINE_START structure.
+
+
+config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+	bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
+	depends on ARCH_OMAP3 && PM
+	help
+	  Without this option, L2 Auxiliary control register contents are
+	  lost during off-mode entry on HS/EMU devices. This feature
+	  requires support from PPA / boot-loader in HS/EMU devices, which
+	  currently does not exist by default.
+
+config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+	int "Service ID for the support routine to set L2 AUX control"
+	depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+	default 43
+	help
+	  PPA routine service ID for setting L2 auxiliary control register.
+
+config OMAP_SERIAL_WAKE
+	bool "Enable wake-up events for serial ports"
+	depends on ARCH_OMAP1 && OMAP_MUX
+	default y
+	help
+	  Select this option if you want to have your system wake up
+	  to data on the serial RX line. This allows you to wake the
+	  system from serial console.
+
+endmenu
+
+endif
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
new file mode 100644
index 000000000..371f2ed00
--- /dev/null
+++ b/arch/arm/plat-omap/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the linux kernel.
+#
+
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-omap/include
+
+# Common support
+obj-y := sram.o dma.o counter_32k.o
+
+# omap_device support (OMAP2+ only at the moment)
+
+obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
new file mode 100644
index 000000000..7a729ade2
--- /dev/null
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * OMAP 32ksynctimer/counter_32k-related code
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * NOTE: This timer is not the same timer as the old OMAP1 MPU timer.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/sched_clock.h>
+
+#include <asm/mach/time.h>
+
+#include <plat/counter-32k.h>
+
+/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
+#define OMAP2_32KSYNCNT_REV_OFF		0x0
+#define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
+#define OMAP2_32KSYNCNT_CR_OFF_LOW	0x10
+#define OMAP2_32KSYNCNT_CR_OFF_HIGH	0x30
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510.  Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+static void __iomem *sync32k_cnt_reg;
+
+static u64 notrace omap_32k_read_sched_clock(void)
+{
+	return sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
+}
+
+/**
+ * omap_read_persistent_clock64 -  Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer.  Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec64.
+ */
+static struct timespec64 persistent_ts;
+static cycles_t cycles;
+static unsigned int persistent_mult, persistent_shift;
+
+static void omap_read_persistent_clock64(struct timespec64 *ts)
+{
+	unsigned long long nsecs;
+	cycles_t last_cycles;
+
+	last_cycles = cycles;
+	cycles = sync32k_cnt_reg ? readl_relaxed(sync32k_cnt_reg) : 0;
+
+	nsecs = clocksource_cyc2ns(cycles - last_cycles,
+					persistent_mult, persistent_shift);
+
+	timespec64_add_ns(&persistent_ts, nsecs);
+
+	*ts = persistent_ts;
+}
+
+/**
+ * omap_init_clocksource_32k - setup and register counter 32k as a
+ * kernel clocksource
+ * @pbase: base addr of counter_32k module
+ * @size: size of counter_32k to map
+ *
+ * Returns 0 upon success or negative error code upon failure.
+ *
+ */
+int __init omap_init_clocksource_32k(void __iomem *vbase)
+{
+	int ret;
+
+	/*
+	 * 32k sync Counter IP register offsets vary between the
+	 * highlander version and the legacy ones.
+	 * The 'SCHEME' bits(30-31) of the revision register is used
+	 * to identify the version.
+	 */
+	if (readl_relaxed(vbase + OMAP2_32KSYNCNT_REV_OFF) &
+						OMAP2_32KSYNCNT_REV_SCHEME)
+		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
+	else
+		sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW;
+
+	/*
+	 * 120000 rough estimate from the calculations in
+	 * __clocksource_update_freq_scale.
+	 */
+	clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
+			32768, NSEC_PER_SEC, 120000);
+
+	ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768,
+				250, 32, clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("32k_counter: can't register clocksource\n");
+		return ret;
+	}
+
+	sched_clock_register(omap_32k_read_sched_clock, 32, 32768);
+	register_persistent_clock(omap_read_persistent_clock64);
+	pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
+
+	return 0;
+}
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
new file mode 100644
index 000000000..2b698d074
--- /dev/null
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/plat-omap/debug-leds.c
+ *
+ * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
+ * Copyright 2003 by Texas Instruments Incorporated
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/platform_data/gpio-omap.h>
+#include <linux/slab.h>
+
+#include <asm/mach-types.h>
+
+/* Many OMAP development platforms reuse the same "debug board"; these
+ * platforms include H2, H3, H4, and Perseus2.  There are 16 LEDs on the
+ * debug board (all green), accessed through FPGA registers.
+ */
+
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+	/* offset 0x00 */
+	u16		smc91x[8];
+	/* offset 0x10 */
+	u16		fpga_rev;
+	u16		board_rev;
+	u16		gpio_outputs;
+	u16		leds;
+	/* offset 0x18 */
+	u16		misc_inputs;
+	u16		lan_status;
+	u16		lan_reset;
+	u16		reserved0;
+	/* offset 0x20 */
+	u16		ps2_data;
+	u16		ps2_ctrl;
+	/* plus also 4 rs232 ports ... */
+};
+
+static struct h2p2_dbg_fpga __iomem *fpga;
+
+static u16 fpga_led_state;
+
+struct dbg_led {
+	struct led_classdev	cdev;
+	u16			mask;
+};
+
+static const struct {
+	const char *name;
+	const char *trigger;
+} dbg_leds[] = {
+	{ "dbg:d4", "heartbeat", },
+	{ "dbg:d5", "cpu0", },
+	{ "dbg:d6", "default-on", },
+	{ "dbg:d7", },
+	{ "dbg:d8", },
+	{ "dbg:d9", },
+	{ "dbg:d10", },
+	{ "dbg:d11", },
+	{ "dbg:d12", },
+	{ "dbg:d13", },
+	{ "dbg:d14", },
+	{ "dbg:d15", },
+	{ "dbg:d16", },
+	{ "dbg:d17", },
+	{ "dbg:d18", },
+	{ "dbg:d19", },
+};
+
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static void dbg_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
+{
+	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+	u16 reg;
+
+	reg = readw_relaxed(&fpga->leds);
+	if (b != LED_OFF)
+		reg |= led->mask;
+	else
+		reg &= ~led->mask;
+	writew_relaxed(reg, &fpga->leds);
+}
+
+static enum led_brightness dbg_led_get(struct led_classdev *cdev)
+{
+	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+	u16 reg;
+
+	reg = readw_relaxed(&fpga->leds);
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
+}
+
+static int fpga_probe(struct platform_device *pdev)
+{
+	struct resource	*iomem;
+	int i;
+
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!iomem)
+		return -ENODEV;
+
+	fpga = ioremap(iomem->start, resource_size(iomem));
+	writew_relaxed(0xff, &fpga->leds);
+
+	for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
+		struct dbg_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
+
+		led->cdev.name = dbg_leds[i].name;
+		led->cdev.brightness_set = dbg_led_set;
+		led->cdev.brightness_get = dbg_led_get;
+		led->cdev.default_trigger = dbg_leds[i].trigger;
+		led->mask = BIT(i);
+
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int fpga_suspend_noirq(struct device *dev)
+{
+	fpga_led_state = readw_relaxed(&fpga->leds);
+	writew_relaxed(0xff, &fpga->leds);
+
+	return 0;
+}
+
+static int fpga_resume_noirq(struct device *dev)
+{
+	writew_relaxed(~fpga_led_state, &fpga->leds);
+	return 0;
+}
+
+static const struct dev_pm_ops fpga_dev_pm_ops = {
+	.suspend_noirq = fpga_suspend_noirq,
+	.resume_noirq = fpga_resume_noirq,
+};
+
+static struct platform_driver led_driver = {
+	.driver.name	= "omap_dbg_led",
+	.driver.pm	= &fpga_dev_pm_ops,
+	.probe		= fpga_probe,
+};
+
+static int __init fpga_init(void)
+{
+	if (machine_is_omap_h4()
+			|| machine_is_omap_h3()
+			|| machine_is_omap_h2()
+			|| machine_is_omap_perseus2()
+			)
+		return platform_driver_register(&led_driver);
+	return 0;
+}
+fs_initcall(fpga_init);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
new file mode 100644
index 000000000..1eb59003b
--- /dev/null
+++ b/arch/arm/plat-omap/dma.c
@@ -0,0 +1,1004 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/plat-omap/dma.c
+ *
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Support functions for the OMAP internal DMA channels.
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
+ * Converted DMA library into DMA platform driver.
+ *	- G, Manjunath Kondaiah <manjugk@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <linux/omap-dma.h>
+
+#ifdef CONFIG_ARCH_OMAP1
+#include <mach/soc.h>
+#endif
+
+/*
+ * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
+ * channels that an instance of the SDMA IP block can support.  Used
+ * to size arrays.  (The actual maximum on a particular SoC may be less
+ * than this -- for example, OMAP1 SDMA instances only support 17 logical
+ * DMA channels.)
+ */
+#define MAX_LOGICAL_DMA_CH_COUNT		32
+
+#undef DEBUG
+
+#ifndef CONFIG_ARCH_OMAP1
+enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
+	DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
+};
+
+enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
+#endif
+
+#define OMAP_DMA_ACTIVE			0x01
+#define OMAP2_DMA_CSR_CLEAR_MASK	0xffffffff
+
+#define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
+
+static struct omap_system_dma_plat_info *p;
+static struct omap_dma_dev_attr *d;
+static void omap_clear_dma(int lch);
+static int enable_1510_mode;
+static u32 errata;
+
+struct dma_link_info {
+	int *linked_dmach_q;
+	int no_of_lchs_linked;
+
+	int q_count;
+	int q_tail;
+	int q_head;
+
+	int chain_state;
+	int chain_mode;
+
+};
+
+static int dma_lch_count;
+static int dma_chan_count;
+static int omap_dma_reserve_channels;
+
+static spinlock_t dma_chan_lock;
+static struct omap_dma_lch *dma_chan;
+
+static inline void disable_lnk(int lch);
+static void omap_disable_channel_irq(int lch);
+static inline void omap_enable_channel_irq(int lch);
+
+#ifdef CONFIG_ARCH_OMAP15XX
+/* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
+static int omap_dma_in_1510_mode(void)
+{
+	return enable_1510_mode;
+}
+#else
+#define omap_dma_in_1510_mode()		0
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+static inline void set_gdma_dev(int req, int dev)
+{
+	u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
+	int shift = ((req - 1) % 5) * 6;
+	u32 l;
+
+	l = omap_readl(reg);
+	l &= ~(0x3f << shift);
+	l |= (dev - 1) << shift;
+	omap_writel(l, reg);
+}
+#else
+#define set_gdma_dev(req, dev)	do {} while (0)
+#define omap_readl(reg)		0
+#define omap_writel(val, reg)	do {} while (0)
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+	unsigned long reg;
+	u32 l;
+
+	if (dma_omap1()) {
+		switch (dst_port) {
+		case OMAP_DMA_PORT_OCP_T1:	/* FFFECC00 */
+			reg = OMAP_TC_OCPT1_PRIOR;
+			break;
+		case OMAP_DMA_PORT_OCP_T2:	/* FFFECCD0 */
+			reg = OMAP_TC_OCPT2_PRIOR;
+			break;
+		case OMAP_DMA_PORT_EMIFF:	/* FFFECC08 */
+			reg = OMAP_TC_EMIFF_PRIOR;
+			break;
+		case OMAP_DMA_PORT_EMIFS:	/* FFFECC04 */
+			reg = OMAP_TC_EMIFS_PRIOR;
+			break;
+		default:
+			BUG();
+			return;
+		}
+		l = omap_readl(reg);
+		l &= ~(0xf << 8);
+		l |= (priority & 0xf) << 8;
+		omap_writel(l, reg);
+	}
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+void omap_set_dma_priority(int lch, int dst_port, int priority)
+{
+	u32 ccr;
+
+	ccr = p->dma_read(CCR, lch);
+	if (priority)
+		ccr |= (1 << 6);
+	else
+		ccr &= ~(1 << 6);
+	p->dma_write(ccr, CCR, lch);
+}
+#endif
+EXPORT_SYMBOL(omap_set_dma_priority);
+
+void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
+				  int frame_count, int sync_mode,
+				  int dma_trigger, int src_or_dst_synch)
+{
+	u32 l;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~0x03;
+	l |= data_type;
+	p->dma_write(l, CSDP, lch);
+
+	if (dma_omap1()) {
+		u16 ccr;
+
+		ccr = p->dma_read(CCR, lch);
+		ccr &= ~(1 << 5);
+		if (sync_mode == OMAP_DMA_SYNC_FRAME)
+			ccr |= 1 << 5;
+		p->dma_write(ccr, CCR, lch);
+
+		ccr = p->dma_read(CCR2, lch);
+		ccr &= ~(1 << 2);
+		if (sync_mode == OMAP_DMA_SYNC_BLOCK)
+			ccr |= 1 << 2;
+		p->dma_write(ccr, CCR2, lch);
+	}
+
+	if (dma_omap2plus() && dma_trigger) {
+		u32 val;
+
+		val = p->dma_read(CCR, lch);
+
+		/* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
+		val &= ~((1 << 23) | (3 << 19) | 0x1f);
+		val |= (dma_trigger & ~0x1f) << 14;
+		val |= dma_trigger & 0x1f;
+
+		if (sync_mode & OMAP_DMA_SYNC_FRAME)
+			val |= 1 << 5;
+		else
+			val &= ~(1 << 5);
+
+		if (sync_mode & OMAP_DMA_SYNC_BLOCK)
+			val |= 1 << 18;
+		else
+			val &= ~(1 << 18);
+
+		if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) {
+			val &= ~(1 << 24);	/* dest synch */
+			val |= (1 << 23);	/* Prefetch */
+		} else if (src_or_dst_synch) {
+			val |= 1 << 24;		/* source synch */
+		} else {
+			val &= ~(1 << 24);	/* dest synch */
+		}
+		p->dma_write(val, CCR, lch);
+	}
+
+	p->dma_write(elem_count, CEN, lch);
+	p->dma_write(frame_count, CFN, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_transfer_params);
+
+void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
+{
+	if (dma_omap1() && !dma_omap15xx()) {
+		u32 l;
+
+		l = p->dma_read(LCH_CTRL, lch);
+		l &= ~0x7;
+		l |= mode;
+		p->dma_write(l, LCH_CTRL, lch);
+	}
+}
+EXPORT_SYMBOL(omap_set_dma_channel_mode);
+
+/* Note that src_port is only for omap1 */
+void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+			     unsigned long src_start,
+			     int src_ei, int src_fi)
+{
+	u32 l;
+
+	if (dma_omap1()) {
+		u16 w;
+
+		w = p->dma_read(CSDP, lch);
+		w &= ~(0x1f << 2);
+		w |= src_port << 2;
+		p->dma_write(w, CSDP, lch);
+	}
+
+	l = p->dma_read(CCR, lch);
+	l &= ~(0x03 << 12);
+	l |= src_amode << 12;
+	p->dma_write(l, CCR, lch);
+
+	p->dma_write(src_start, CSSA, lch);
+
+	p->dma_write(src_ei, CSEI, lch);
+	p->dma_write(src_fi, CSFI, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_src_params);
+
+void omap_set_dma_src_data_pack(int lch, int enable)
+{
+	u32 l;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~(1 << 6);
+	if (enable)
+		l |= (1 << 6);
+	p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_src_data_pack);
+
+void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
+{
+	unsigned int burst = 0;
+	u32 l;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~(0x03 << 7);
+
+	switch (burst_mode) {
+	case OMAP_DMA_DATA_BURST_DIS:
+		break;
+	case OMAP_DMA_DATA_BURST_4:
+		if (dma_omap2plus())
+			burst = 0x1;
+		else
+			burst = 0x2;
+		break;
+	case OMAP_DMA_DATA_BURST_8:
+		if (dma_omap2plus()) {
+			burst = 0x2;
+			break;
+		}
+		/*
+		 * not supported by current hardware on OMAP1
+		 * w |= (0x03 << 7);
+		 */
+		fallthrough;
+	case OMAP_DMA_DATA_BURST_16:
+		if (dma_omap2plus()) {
+			burst = 0x3;
+			break;
+		}
+		/* OMAP1 don't support burst 16 */
+		fallthrough;
+	default:
+		BUG();
+	}
+
+	l |= (burst << 7);
+	p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
+
+/* Note that dest_port is only for OMAP1 */
+void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+			      unsigned long dest_start,
+			      int dst_ei, int dst_fi)
+{
+	u32 l;
+
+	if (dma_omap1()) {
+		l = p->dma_read(CSDP, lch);
+		l &= ~(0x1f << 9);
+		l |= dest_port << 9;
+		p->dma_write(l, CSDP, lch);
+	}
+
+	l = p->dma_read(CCR, lch);
+	l &= ~(0x03 << 14);
+	l |= dest_amode << 14;
+	p->dma_write(l, CCR, lch);
+
+	p->dma_write(dest_start, CDSA, lch);
+
+	p->dma_write(dst_ei, CDEI, lch);
+	p->dma_write(dst_fi, CDFI, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_dest_params);
+
+void omap_set_dma_dest_data_pack(int lch, int enable)
+{
+	u32 l;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~(1 << 13);
+	if (enable)
+		l |= 1 << 13;
+	p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
+
+void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
+{
+	unsigned int burst = 0;
+	u32 l;
+
+	l = p->dma_read(CSDP, lch);
+	l &= ~(0x03 << 14);
+
+	switch (burst_mode) {
+	case OMAP_DMA_DATA_BURST_DIS:
+		break;
+	case OMAP_DMA_DATA_BURST_4:
+		if (dma_omap2plus())
+			burst = 0x1;
+		else
+			burst = 0x2;
+		break;
+	case OMAP_DMA_DATA_BURST_8:
+		if (dma_omap2plus())
+			burst = 0x2;
+		else
+			burst = 0x3;
+		break;
+	case OMAP_DMA_DATA_BURST_16:
+		if (dma_omap2plus()) {
+			burst = 0x3;
+			break;
+		}
+		/* OMAP1 don't support burst 16 */
+		fallthrough;
+	default:
+		printk(KERN_ERR "Invalid DMA burst mode\n");
+		BUG();
+		return;
+	}
+	l |= (burst << 14);
+	p->dma_write(l, CSDP, lch);
+}
+EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
+
+static inline void omap_enable_channel_irq(int lch)
+{
+	/* Clear CSR */
+	if (dma_omap1())
+		p->dma_read(CSR, lch);
+	else
+		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+
+	/* Enable some nice interrupts. */
+	p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
+}
+
+static inline void omap_disable_channel_irq(int lch)
+{
+	/* disable channel interrupts */
+	p->dma_write(0, CICR, lch);
+	/* Clear CSR */
+	if (dma_omap1())
+		p->dma_read(CSR, lch);
+	else
+		p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
+}
+
+void omap_disable_dma_irq(int lch, u16 bits)
+{
+	dma_chan[lch].enabled_irqs &= ~bits;
+}
+EXPORT_SYMBOL(omap_disable_dma_irq);
+
+static inline void enable_lnk(int lch)
+{
+	u32 l;
+
+	l = p->dma_read(CLNK_CTRL, lch);
+
+	if (dma_omap1())
+		l &= ~(1 << 14);
+
+	/* Set the ENABLE_LNK bits */
+	if (dma_chan[lch].next_lch != -1)
+		l = dma_chan[lch].next_lch | (1 << 15);
+
+	p->dma_write(l, CLNK_CTRL, lch);
+}
+
+static inline void disable_lnk(int lch)
+{
+	u32 l;
+
+	l = p->dma_read(CLNK_CTRL, lch);
+
+	/* Disable interrupts */
+	omap_disable_channel_irq(lch);
+
+	if (dma_omap1()) {
+		/* Set the STOP_LNK bit */
+		l |= 1 << 14;
+	}
+
+	if (dma_omap2plus()) {
+		/* Clear the ENABLE_LNK bit */
+		l &= ~(1 << 15);
+	}
+
+	p->dma_write(l, CLNK_CTRL, lch);
+	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
+}
+
+int omap_request_dma(int dev_id, const char *dev_name,
+		     void (*callback)(int lch, u16 ch_status, void *data),
+		     void *data, int *dma_ch_out)
+{
+	int ch, free_ch = -1;
+	unsigned long flags;
+	struct omap_dma_lch *chan;
+
+	WARN(strcmp(dev_name, "DMA engine"), "Using deprecated platform DMA API - please update to DMA engine");
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	for (ch = 0; ch < dma_chan_count; ch++) {
+		if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
+			free_ch = ch;
+			/* Exit after first free channel found */
+			break;
+		}
+	}
+	if (free_ch == -1) {
+		spin_unlock_irqrestore(&dma_chan_lock, flags);
+		return -EBUSY;
+	}
+	chan = dma_chan + free_ch;
+	chan->dev_id = dev_id;
+
+	if (p->clear_lch_regs)
+		p->clear_lch_regs(free_ch);
+
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+
+	chan->dev_name = dev_name;
+	chan->callback = callback;
+	chan->data = data;
+	chan->flags = 0;
+
+	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
+
+	if (dma_omap1())
+		chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+
+	if (dma_omap16xx()) {
+		/* If the sync device is set, configure it dynamically. */
+		if (dev_id != 0) {
+			set_gdma_dev(free_ch + 1, dev_id);
+			dev_id = free_ch + 1;
+		}
+		/*
+		 * Disable the 1510 compatibility mode and set the sync device
+		 * id.
+		 */
+		p->dma_write(dev_id | (1 << 10), CCR, free_ch);
+	} else if (dma_omap1()) {
+		p->dma_write(dev_id, CCR, free_ch);
+	}
+
+	*dma_ch_out = free_ch;
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_request_dma);
+
+void omap_free_dma(int lch)
+{
+	unsigned long flags;
+
+	if (dma_chan[lch].dev_id == -1) {
+		pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
+		       lch);
+		return;
+	}
+
+	/* Disable all DMA interrupts for the channel. */
+	omap_disable_channel_irq(lch);
+
+	/* Make sure the DMA transfer is stopped. */
+	p->dma_write(0, CCR, lch);
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	dma_chan[lch].dev_id = -1;
+	dma_chan[lch].next_lch = -1;
+	dma_chan[lch].callback = NULL;
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+}
+EXPORT_SYMBOL(omap_free_dma);
+
+/*
+ * Clears any DMA state so the DMA engine is ready to restart with new buffers
+ * through omap_start_dma(). Any buffers in flight are discarded.
+ */
+static void omap_clear_dma(int lch)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	p->clear_dma(lch);
+	local_irq_restore(flags);
+}
+
+void omap_start_dma(int lch)
+{
+	u32 l;
+
+	/*
+	 * The CPC/CDAC register needs to be initialized to zero
+	 * before starting dma transfer.
+	 */
+	if (dma_omap15xx())
+		p->dma_write(0, CPC, lch);
+	else
+		p->dma_write(0, CDAC, lch);
+
+	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
+		int next_lch, cur_lch;
+		char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
+
+		/* Set the link register of the first channel */
+		enable_lnk(lch);
+
+		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
+		dma_chan_link_map[lch] = 1;
+
+		cur_lch = dma_chan[lch].next_lch;
+		do {
+			next_lch = dma_chan[cur_lch].next_lch;
+
+			/* The loop case: we've been here already */
+			if (dma_chan_link_map[cur_lch])
+				break;
+			/* Mark the current channel */
+			dma_chan_link_map[cur_lch] = 1;
+
+			enable_lnk(cur_lch);
+			omap_enable_channel_irq(cur_lch);
+
+			cur_lch = next_lch;
+		} while (next_lch != -1);
+	} else if (IS_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS))
+		p->dma_write(lch, CLNK_CTRL, lch);
+
+	omap_enable_channel_irq(lch);
+
+	l = p->dma_read(CCR, lch);
+
+	if (IS_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING))
+			l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
+	l |= OMAP_DMA_CCR_EN;
+
+	/*
+	 * As dma_write() uses IO accessors which are weakly ordered, there
+	 * is no guarantee that data in coherent DMA memory will be visible
+	 * to the DMA device.  Add a memory barrier here to ensure that any
+	 * such data is visible prior to enabling DMA.
+	 */
+	mb();
+	p->dma_write(l, CCR, lch);
+
+	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
+}
+EXPORT_SYMBOL(omap_start_dma);
+
+void omap_stop_dma(int lch)
+{
+	u32 l;
+
+	/* Disable all interrupts on the channel */
+	omap_disable_channel_irq(lch);
+
+	l = p->dma_read(CCR, lch);
+	if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&
+			(l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
+		int i = 0;
+		u32 sys_cf;
+
+		/* Configure No-Standby */
+		l = p->dma_read(OCP_SYSCONFIG, lch);
+		sys_cf = l;
+		l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK;
+		l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE);
+		p->dma_write(l , OCP_SYSCONFIG, 0);
+
+		l = p->dma_read(CCR, lch);
+		l &= ~OMAP_DMA_CCR_EN;
+		p->dma_write(l, CCR, lch);
+
+		/* Wait for sDMA FIFO drain */
+		l = p->dma_read(CCR, lch);
+		while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE |
+					OMAP_DMA_CCR_WR_ACTIVE))) {
+			udelay(5);
+			i++;
+			l = p->dma_read(CCR, lch);
+		}
+		if (i >= 100)
+			pr_err("DMA drain did not complete on lch %d\n", lch);
+		/* Restore OCP_SYSCONFIG */
+		p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
+	} else {
+		l &= ~OMAP_DMA_CCR_EN;
+		p->dma_write(l, CCR, lch);
+	}
+
+	/*
+	 * Ensure that data transferred by DMA is visible to any access
+	 * after DMA has been disabled.  This is important for coherent
+	 * DMA regions.
+	 */
+	mb();
+
+	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
+		int next_lch, cur_lch = lch;
+		char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
+
+		memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
+		do {
+			/* The loop case: we've been here already */
+			if (dma_chan_link_map[cur_lch])
+				break;
+			/* Mark the current channel */
+			dma_chan_link_map[cur_lch] = 1;
+
+			disable_lnk(cur_lch);
+
+			next_lch = dma_chan[cur_lch].next_lch;
+			cur_lch = next_lch;
+		} while (next_lch != -1);
+	}
+
+	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
+}
+EXPORT_SYMBOL(omap_stop_dma);
+
+/*
+ * Allows changing the DMA callback function or data. This may be needed if
+ * the driver shares a single DMA channel for multiple dma triggers.
+ */
+/*
+ * Returns current physical source address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CSSA_L register overflow between the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_src_pos(int lch)
+{
+	dma_addr_t offset = 0;
+
+	if (dma_omap15xx())
+		offset = p->dma_read(CPC, lch);
+	else
+		offset = p->dma_read(CSAC, lch);
+
+	if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
+		offset = p->dma_read(CSAC, lch);
+
+	if (!dma_omap15xx()) {
+		/*
+		 * CDAC == 0 indicates that the DMA transfer on the channel has
+		 * not been started (no data has been transferred so far).
+		 * Return the programmed source start address in this case.
+		 */
+		if (likely(p->dma_read(CDAC, lch)))
+			offset = p->dma_read(CSAC, lch);
+		else
+			offset = p->dma_read(CSSA, lch);
+	}
+
+	if (dma_omap1())
+		offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
+
+	return offset;
+}
+EXPORT_SYMBOL(omap_get_dma_src_pos);
+
+/*
+ * Returns current physical destination address for the given DMA channel.
+ * If the channel is running the caller must disable interrupts prior calling
+ * this function and process the returned value before re-enabling interrupt to
+ * prevent races with the interrupt handler. Note that in continuous mode there
+ * is a chance for CDSA_L register overflow between the two reads resulting
+ * in incorrect return value.
+ */
+dma_addr_t omap_get_dma_dst_pos(int lch)
+{
+	dma_addr_t offset = 0;
+
+	if (dma_omap15xx())
+		offset = p->dma_read(CPC, lch);
+	else
+		offset = p->dma_read(CDAC, lch);
+
+	/*
+	 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
+	 * read before the DMA controller finished disabling the channel.
+	 */
+	if (!dma_omap15xx() && offset == 0) {
+		offset = p->dma_read(CDAC, lch);
+		/*
+		 * CDAC == 0 indicates that the DMA transfer on the channel has
+		 * not been started (no data has been transferred so far).
+		 * Return the programmed destination start address in this case.
+		 */
+		if (unlikely(!offset))
+			offset = p->dma_read(CDSA, lch);
+	}
+
+	if (dma_omap1())
+		offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
+
+	return offset;
+}
+EXPORT_SYMBOL(omap_get_dma_dst_pos);
+
+int omap_get_dma_active_status(int lch)
+{
+	return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0;
+}
+EXPORT_SYMBOL(omap_get_dma_active_status);
+
+int omap_dma_running(void)
+{
+	int lch;
+
+	if (dma_omap1())
+		if (omap_lcd_dma_running())
+			return 1;
+
+	for (lch = 0; lch < dma_chan_count; lch++)
+		if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
+			return 1;
+
+	return 0;
+}
+
+/*----------------------------------------------------------------------------*/
+
+#ifdef CONFIG_ARCH_OMAP1
+
+static int omap1_dma_handle_ch(int ch)
+{
+	u32 csr;
+
+	if (enable_1510_mode && ch >= 6) {
+		csr = dma_chan[ch].saved_csr;
+		dma_chan[ch].saved_csr = 0;
+	} else
+		csr = p->dma_read(CSR, ch);
+	if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
+		dma_chan[ch + 6].saved_csr = csr >> 7;
+		csr &= 0x7f;
+	}
+	if ((csr & 0x3f) == 0)
+		return 0;
+	if (unlikely(dma_chan[ch].dev_id == -1)) {
+		pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n",
+			ch, csr);
+		return 0;
+	}
+	if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
+		pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id);
+	if (unlikely(csr & OMAP_DMA_DROP_IRQ))
+		pr_warn("DMA synchronization event drop occurred with device %d\n",
+			dma_chan[ch].dev_id);
+	if (likely(csr & OMAP_DMA_BLOCK_IRQ))
+		dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
+	if (likely(dma_chan[ch].callback != NULL))
+		dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
+
+	return 1;
+}
+
+static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
+{
+	int ch = ((int) dev_id) - 1;
+	int handled = 0;
+
+	for (;;) {
+		int handled_now = 0;
+
+		handled_now += omap1_dma_handle_ch(ch);
+		if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
+			handled_now += omap1_dma_handle_ch(ch + 6);
+		if (!handled_now)
+			break;
+		handled += handled_now;
+	}
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+#else
+#define omap1_dma_irq_handler	NULL
+#endif
+
+struct omap_system_dma_plat_info *omap_get_plat_info(void)
+{
+	return p;
+}
+EXPORT_SYMBOL_GPL(omap_get_plat_info);
+
+static int omap_system_dma_probe(struct platform_device *pdev)
+{
+	int ch, ret = 0;
+	int dma_irq;
+	char irq_name[4];
+
+	p = pdev->dev.platform_data;
+	if (!p) {
+		dev_err(&pdev->dev,
+			"%s: System DMA initialized without platform data\n",
+			__func__);
+		return -EINVAL;
+	}
+
+	d			= p->dma_attr;
+	errata			= p->errata;
+
+	if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels
+			&& (omap_dma_reserve_channels < d->lch_count))
+		d->lch_count	= omap_dma_reserve_channels;
+
+	dma_lch_count		= d->lch_count;
+	dma_chan_count		= dma_lch_count;
+	enable_1510_mode	= d->dev_caps & ENABLE_1510_MODE;
+
+	dma_chan = devm_kcalloc(&pdev->dev, dma_lch_count,
+				sizeof(*dma_chan), GFP_KERNEL);
+	if (!dma_chan)
+		return -ENOMEM;
+
+	spin_lock_init(&dma_chan_lock);
+	for (ch = 0; ch < dma_chan_count; ch++) {
+		omap_clear_dma(ch);
+
+		dma_chan[ch].dev_id = -1;
+		dma_chan[ch].next_lch = -1;
+
+		if (ch >= 6 && enable_1510_mode)
+			continue;
+
+		if (dma_omap1()) {
+			/*
+			 * request_irq() doesn't like dev_id (ie. ch) being
+			 * zero, so we have to kludge around this.
+			 */
+			sprintf(&irq_name[0], "%d", ch);
+			dma_irq = platform_get_irq_byname(pdev, irq_name);
+
+			if (dma_irq < 0) {
+				ret = dma_irq;
+				goto exit_dma_irq_fail;
+			}
+
+			/* INT_DMA_LCD is handled in lcd_dma.c */
+			if (dma_irq == INT_DMA_LCD)
+				continue;
+
+			ret = request_irq(dma_irq,
+					omap1_dma_irq_handler, 0, "DMA",
+					(void *) (ch + 1));
+			if (ret != 0)
+				goto exit_dma_irq_fail;
+		}
+	}
+
+	/* reserve dma channels 0 and 1 in high security devices on 34xx */
+	if (d->dev_caps & HS_CHANNELS_RESERVED) {
+		pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
+		dma_chan[0].dev_id = 0;
+		dma_chan[1].dev_id = 1;
+	}
+	p->show_dma_caps();
+	return 0;
+
+exit_dma_irq_fail:
+	return ret;
+}
+
+static int omap_system_dma_remove(struct platform_device *pdev)
+{
+	int dma_irq, irq_rel = 0;
+
+	if (dma_omap2plus())
+		return 0;
+
+	for ( ; irq_rel < dma_chan_count; irq_rel++) {
+		dma_irq = platform_get_irq(pdev, irq_rel);
+		free_irq(dma_irq, (void *)(irq_rel + 1));
+	}
+
+	return 0;
+}
+
+static struct platform_driver omap_system_dma_driver = {
+	.probe		= omap_system_dma_probe,
+	.remove		= omap_system_dma_remove,
+	.driver		= {
+		.name	= "omap_dma_system"
+	},
+};
+
+static int __init omap_system_dma_init(void)
+{
+	return platform_driver_register(&omap_system_dma_driver);
+}
+arch_initcall(omap_system_dma_init);
+
+static void __exit omap_system_dma_exit(void)
+{
+	platform_driver_unregister(&omap_system_dma_driver);
+}
+
+MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments Inc");
+
+/*
+ * Reserve the omap SDMA channels using cmdline bootarg
+ * "omap_dma_reserve_ch=". The valid range is 1 to 32
+ */
+static int __init omap_dma_cmdline_reserve_ch(char *str)
+{
+	if (get_option(&str, &omap_dma_reserve_channels) != 1)
+		omap_dma_reserve_channels = 0;
+	return 1;
+}
+
+__setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
+
+
diff --git a/arch/arm/plat-omap/include/plat/counter-32k.h b/arch/arm/plat-omap/include/plat/counter-32k.h
new file mode 100644
index 000000000..da000d482
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/counter-32k.h
@@ -0,0 +1 @@
+int omap_init_clocksource_32k(void __iomem *vbase);
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
new file mode 100644
index 000000000..36f4c352c
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Copyright (C) 2009-11 Texas Instruments.
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+#ifdef CONFIG_ARCH_OMAP1
+#include <mach/soc.h>
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h
new file mode 100644
index 000000000..30a077308
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+int omap_sram_init(void);
+
+void omap_map_sram(unsigned long start, unsigned long size,
+			unsigned long skip, int cached);
+void omap_sram_reset(void);
+
+extern void *omap_sram_push(void *funcp, unsigned long size);
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
new file mode 100644
index 000000000..0f1eacad7
--- /dev/null
+++ b/arch/arm/plat-omap/sram.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/plat-omap/sram.c
+ *
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fncpy.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+#include <asm/set_memory.h>
+
+#include <asm/mach/map.h>
+
+#include <plat/sram.h>
+
+#define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
+
+static void __iomem *omap_sram_base;
+static unsigned long omap_sram_skip;
+static unsigned long omap_sram_size;
+static void __iomem *omap_sram_ceil;
+
+/*
+ * Memory allocator for SRAM: calculates the new ceiling address
+ * for pushing a function using the fncpy API.
+ *
+ * Note that fncpy requires the returned address to be aligned
+ * to an 8-byte boundary.
+ */
+static void *omap_sram_push_address(unsigned long size)
+{
+	unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+	available = omap_sram_ceil - (omap_sram_base + omap_sram_skip);
+
+	if (size > available) {
+		pr_err("Not enough space in SRAM\n");
+		return NULL;
+	}
+
+	new_ceil -= size;
+	new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+	omap_sram_ceil = IOMEM(new_ceil);
+
+	return (void *)omap_sram_ceil;
+}
+
+void *omap_sram_push(void *funcp, unsigned long size)
+{
+	void *sram;
+	unsigned long base;
+	int pages;
+	void *dst = NULL;
+
+	sram = omap_sram_push_address(size);
+	if (!sram)
+		return NULL;
+
+	base = (unsigned long)sram & PAGE_MASK;
+	pages = PAGE_ALIGN(size) / PAGE_SIZE;
+
+	set_memory_rw(base, pages);
+
+	dst = fncpy(sram, funcp, size);
+
+	set_memory_ro(base, pages);
+	set_memory_x(base, pages);
+
+	return dst;
+}
+
+/*
+ * The SRAM context is lost during off-idle and stack
+ * needs to be reset.
+ */
+void omap_sram_reset(void)
+{
+	omap_sram_ceil = omap_sram_base + omap_sram_size;
+}
+
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+void __init omap_map_sram(unsigned long start, unsigned long size,
+				 unsigned long skip, int cached)
+{
+	unsigned long base;
+	int pages;
+
+	if (size == 0)
+		return;
+
+	start = ROUND_DOWN(start, PAGE_SIZE);
+	omap_sram_size = size;
+	omap_sram_skip = skip;
+	omap_sram_base = __arm_ioremap_exec(start, size, cached);
+	if (!omap_sram_base) {
+		pr_err("SRAM: Could not map\n");
+		return;
+	}
+
+	omap_sram_reset();
+
+	/*
+	 * Looks like we need to preserve some bootloader code at the
+	 * beginning of SRAM for jumping to flash for reboot to work...
+	 */
+	memset_io(omap_sram_base + omap_sram_skip, 0,
+		  omap_sram_size - omap_sram_skip);
+
+	base = (unsigned long)omap_sram_base;
+	pages = PAGE_ALIGN(omap_sram_size) / PAGE_SIZE;
+
+	set_memory_ro(base, pages);
+	set_memory_x(base, pages);
+}