Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1993 insertions, 0 deletions

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
new file mode 100644
index 000000000..13cf137da
--- /dev/null
+++ b/arch/arm64/Kconfig
@@ -0,0 +1,1993 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config ARM64
+	def_bool y
+	select ACPI_CCA_REQUIRED if ACPI
+	select ACPI_GENERIC_GSI if ACPI
+	select ACPI_GTDT if ACPI
+	select ACPI_IORT if ACPI
+	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
+	select ACPI_MCFG if (ACPI && PCI)
+	select ACPI_SPCR_TABLE if ACPI
+	select ACPI_PPTT if ACPI
+	select ARCH_HAS_DEBUG_WX
+	select ARCH_BINFMT_ELF_STATE
+	select ARCH_HAS_DEBUG_VIRTUAL
+	select ARCH_HAS_DEBUG_VM_PGTABLE
+	select ARCH_HAS_DEVMEM_IS_ALLOWED
+	select ARCH_HAS_DMA_PREP_COHERENT
+	select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
+	select ARCH_HAS_FAST_MULTIPLIER
+	select ARCH_HAS_FORTIFY_SOURCE
+	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_GIGANTIC_PAGE
+	select ARCH_HAS_KCOV
+	select ARCH_HAS_KEEPINITRD
+	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
+	select ARCH_HAS_PTE_DEVMAP
+	select ARCH_HAS_PTE_SPECIAL
+	select ARCH_HAS_SETUP_DMA_OPS
+	select ARCH_HAS_SET_DIRECT_MAP
+	select ARCH_HAS_SET_MEMORY
+	select ARCH_STACKWALK
+	select ARCH_HAS_STRICT_KERNEL_RWX
+	select ARCH_HAS_STRICT_MODULE_RWX
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_SYSCALL_WRAPPER
+	select ARCH_HAS_TEARDOWN_DMA_OPS if IOMMU_SUPPORT
+	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
+	select ARCH_HAVE_ELF_PROT
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select ARCH_INLINE_READ_LOCK if !PREEMPTION
+	select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
+	select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_READ_LOCK_IRQSAVE if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK_BH if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_WRITE_LOCK_IRQSAVE if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE if !PREEMPTION
+	select ARCH_INLINE_SPIN_TRYLOCK if !PREEMPTION
+	select ARCH_INLINE_SPIN_TRYLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK_BH if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_SPIN_LOCK_IRQSAVE if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK_BH if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK_IRQ if !PREEMPTION
+	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE if !PREEMPTION
+	select ARCH_KEEP_MEMBLOCK
+	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_GNU_PROPERTY
+	select ARCH_USE_QUEUED_RWLOCKS
+	select ARCH_USE_QUEUED_SPINLOCKS
+	select ARCH_USE_SYM_ANNOTATIONS
+	select ARCH_SUPPORTS_MEMORY_FAILURE
+	select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK
+	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128 && (GCC_VERSION >= 50000 || CC_IS_CLANG)
+	select ARCH_SUPPORTS_NUMA_BALANCING
+	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
+	select ARCH_WANT_DEFAULT_BPF_JIT
+	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
+	select ARCH_WANT_FRAME_POINTERS
+	select ARCH_WANT_HUGE_PMD_SHARE if ARM64_4K_PAGES || (ARM64_16K_PAGES && !ARM64_VA_BITS_36)
+	select ARCH_WANT_LD_ORPHAN_WARN
+	select ARCH_HAS_UBSAN_SANITIZE_ALL
+	select ARM_AMBA
+	select ARM_ARCH_TIMER
+	select ARM_GIC
+	select AUDIT_ARCH_COMPAT_GENERIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
+	select ARM_PSCI_FW
+	select BUILDTIME_TABLE_SORT
+	select CLONE_BACKWARDS
+	select COMMON_CLK
+	select CPU_PM if (SUSPEND || CPU_IDLE)
+	select CRC32
+	select DCACHE_WORD_ACCESS
+	select DMA_DIRECT_REMAP
+	select EDAC_SUPPORT
+	select FRAME_POINTER
+	select GENERIC_ALLOCATOR
+	select GENERIC_ARCH_TOPOLOGY
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_CLOCKEVENTS_BROADCAST
+	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_CPU_VULNERABILITIES
+	select GENERIC_EARLY_IOREMAP
+	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_IPI
+	select GENERIC_IRQ_MULTI_HANDLER
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_IRQ_SHOW_LEVEL
+	select GENERIC_PCI_IOMAP
+	select GENERIC_PTDUMP
+	select GENERIC_SCHED_CLOCK
+	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
+	select GENERIC_TIME_VSYSCALL
+	select GENERIC_GETTIMEOFDAY
+	select GENERIC_VDSO_TIME_NS
+	select HANDLE_DOMAIN_IRQ
+	select HARDIRQS_SW_RESEND
+	select HAVE_MOVE_PMD
+	select HAVE_PCI
+	select HAVE_ACPI_APEI if (ACPI && EFI)
+	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
+	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_ARCH_BITREVERSE
+	select HAVE_ARCH_COMPILER_H
+	select HAVE_ARCH_HUGE_VMAP
+	select HAVE_ARCH_JUMP_LABEL
+	select HAVE_ARCH_JUMP_LABEL_RELATIVE
+	select HAVE_ARCH_KASAN if !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
+	select HAVE_ARCH_KASAN_SW_TAGS if HAVE_ARCH_KASAN
+	select HAVE_ARCH_KGDB
+	select HAVE_ARCH_MMAP_RND_BITS
+	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
+	select HAVE_ARCH_PREL32_RELOCATIONS
+	select HAVE_ARCH_SECCOMP_FILTER
+	select HAVE_ARCH_STACKLEAK
+	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
+	select HAVE_ARCH_VMAP_STACK
+	select HAVE_ARM_SMCCC
+	select HAVE_ASM_MODVERSIONS
+	select HAVE_EBPF_JIT
+	select HAVE_C_RECORDMCOUNT
+	select HAVE_CMPXCHG_DOUBLE
+	select HAVE_CMPXCHG_LOCAL
+	select HAVE_CONTEXT_TRACKING
+	select HAVE_DEBUG_BUGVERBOSE
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_CONTIGUOUS
+	select HAVE_DYNAMIC_FTRACE
+	select HAVE_DYNAMIC_FTRACE_WITH_REGS \
+		if $(cc-option,-fpatchable-function-entry=2)
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
+	select HAVE_FAST_GUP
+	select HAVE_FTRACE_MCOUNT_RECORD
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_GCC_PLUGINS
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS
+	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_NMI
+	select HAVE_PATA_PLATFORM
+	select HAVE_PERF_EVENTS
+	select HAVE_PERF_REGS
+	select HAVE_PERF_USER_STACK_DUMP
+	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_FUNCTION_ARG_ACCESS_API
+	select HAVE_FUTEX_CMPXCHG if FUTEX
+	select MMU_GATHER_RCU_TABLE_FREE
+	select HAVE_RSEQ
+	select HAVE_STACKPROTECTOR
+	select HAVE_SYSCALL_TRACEPOINTS
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
+	select HAVE_GENERIC_VDSO
+	select IOMMU_DMA if IOMMU_SUPPORT
+	select IRQ_DOMAIN
+	select IRQ_FORCED_THREADING
+	select MODULES_USE_ELF_RELA
+	select NEED_DMA_MAP_STATE
+	select NEED_SG_DMA_LENGTH
+	select OF
+	select OF_EARLY_FLATTREE
+	select PCI_DOMAINS_GENERIC if PCI
+	select PCI_ECAM if (ACPI && PCI)
+	select PCI_SYSCALL if PCI
+	select POWER_RESET
+	select POWER_SUPPLY
+	select SET_FS
+	select SPARSE_IRQ
+	select SWIOTLB
+	select SYSCTL_EXCEPTION_TRACE
+	select THREAD_INFO_IN_TASK
+	help
+	  ARM 64-bit (AArch64) Linux support.
+
+config 64BIT
+	def_bool y
+
+config MMU
+	def_bool y
+
+config ARM64_PAGE_SHIFT
+	int
+	default 16 if ARM64_64K_PAGES
+	default 14 if ARM64_16K_PAGES
+	default 12
+
+config ARM64_CONT_PTE_SHIFT
+	int
+	default 5 if ARM64_64K_PAGES
+	default 7 if ARM64_16K_PAGES
+	default 4
+
+config ARM64_CONT_PMD_SHIFT
+	int
+	default 5 if ARM64_64K_PAGES
+	default 5 if ARM64_16K_PAGES
+	default 4
+
+config ARCH_MMAP_RND_BITS_MIN
+       default 14 if ARM64_64K_PAGES
+       default 16 if ARM64_16K_PAGES
+       default 18
+
+# max bits determined by the following formula:
+#  VA_BITS - PAGE_SHIFT - 3
+config ARCH_MMAP_RND_BITS_MAX
+       default 19 if ARM64_VA_BITS=36
+       default 24 if ARM64_VA_BITS=39
+       default 27 if ARM64_VA_BITS=42
+       default 30 if ARM64_VA_BITS=47
+       default 29 if ARM64_VA_BITS=48 && ARM64_64K_PAGES
+       default 31 if ARM64_VA_BITS=48 && ARM64_16K_PAGES
+       default 33 if ARM64_VA_BITS=48
+       default 14 if ARM64_64K_PAGES
+       default 16 if ARM64_16K_PAGES
+       default 18
+
+config ARCH_MMAP_RND_COMPAT_BITS_MIN
+       default 7 if ARM64_64K_PAGES
+       default 9 if ARM64_16K_PAGES
+       default 11
+
+config ARCH_MMAP_RND_COMPAT_BITS_MAX
+       default 16
+
+config NO_IOPORT_MAP
+	def_bool y if !PCI
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config ILLEGAL_POINTER_VALUE
+	hex
+	default 0xdead000000000000
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config GENERIC_BUG
+	def_bool y
+	depends on BUG
+
+config GENERIC_BUG_RELATIVE_POINTERS
+	def_bool y
+	depends on GENERIC_BUG
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config GENERIC_CSUM
+        def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+	def_bool y
+
+config ZONE_DMA
+	bool "Support DMA zone" if EXPERT
+	default y
+
+config ZONE_DMA32
+	bool "Support DMA32 zone" if EXPERT
+	default y
+
+config ARCH_ENABLE_MEMORY_HOTPLUG
+	def_bool y
+
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
+
+config SMP
+	def_bool y
+
+config KERNEL_MODE_NEON
+	def_bool y
+
+config FIX_EARLYCON_MEM
+	def_bool y
+
+config PGTABLE_LEVELS
+	int
+	default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36
+	default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42
+	default 3 if ARM64_64K_PAGES && (ARM64_VA_BITS_48 || ARM64_VA_BITS_52)
+	default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
+	default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
+	default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48
+
+config ARCH_SUPPORTS_UPROBES
+	def_bool y
+
+config ARCH_PROC_KCORE_TEXT
+	def_bool y
+
+config BROKEN_GAS_INST
+	def_bool !$(as-instr,1:\n.inst 0\n.rept . - 1b\n\nnop\n.endr\n)
+
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN
+	default 0xdfffa00000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && !KASAN_SW_TAGS
+	default 0xdfffd00000000000 if ARM64_VA_BITS_47 && !KASAN_SW_TAGS
+	default 0xdffffe8000000000 if ARM64_VA_BITS_42 && !KASAN_SW_TAGS
+	default 0xdfffffd000000000 if ARM64_VA_BITS_39 && !KASAN_SW_TAGS
+	default 0xdffffffa00000000 if ARM64_VA_BITS_36 && !KASAN_SW_TAGS
+	default 0xefff900000000000 if (ARM64_VA_BITS_48 || ARM64_VA_BITS_52) && KASAN_SW_TAGS
+	default 0xefffc80000000000 if ARM64_VA_BITS_47 && KASAN_SW_TAGS
+	default 0xeffffe4000000000 if ARM64_VA_BITS_42 && KASAN_SW_TAGS
+	default 0xefffffc800000000 if ARM64_VA_BITS_39 && KASAN_SW_TAGS
+	default 0xeffffff900000000 if ARM64_VA_BITS_36 && KASAN_SW_TAGS
+	default 0xffffffffffffffff
+
+source "arch/arm64/Kconfig.platforms"
+
+menu "Kernel Features"
+
+menu "ARM errata workarounds via the alternatives framework"
+
+config ARM64_WORKAROUND_CLEAN_CACHE
+	bool
+
+config ARM64_ERRATUM_826319
+	bool "Cortex-A53: 826319: System might deadlock if a write cannot complete until read data is accepted"
+	default y
+	select ARM64_WORKAROUND_CLEAN_CACHE
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 826319 on Cortex-A53 parts up to r0p2 with an AMBA 4 ACE or
+	  AXI master interface and an L2 cache.
+
+	  If a Cortex-A53 uses an AMBA AXI4 ACE interface to other processors
+	  and is unable to accept a certain write via this interface, it will
+	  not progress on read data presented on the read data channel and the
+	  system can deadlock.
+
+	  The workaround promotes data cache clean instructions to
+	  data cache clean-and-invalidate.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_827319
+	bool "Cortex-A53: 827319: Data cache clean instructions might cause overlapping transactions to the interconnect"
+	default y
+	select ARM64_WORKAROUND_CLEAN_CACHE
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 827319 on Cortex-A53 parts up to r0p2 with an AMBA 5 CHI
+	  master interface and an L2 cache.
+
+	  Under certain conditions this erratum can cause a clean line eviction
+	  to occur at the same time as another transaction to the same address
+	  on the AMBA 5 CHI interface, which can cause data corruption if the
+	  interconnect reorders the two transactions.
+
+	  The workaround promotes data cache clean instructions to
+	  data cache clean-and-invalidate.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_824069
+	bool "Cortex-A53: 824069: Cache line might not be marked as clean after a CleanShared snoop"
+	default y
+	select ARM64_WORKAROUND_CLEAN_CACHE
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 824069 on Cortex-A53 parts up to r0p2 when it is connected
+	  to a coherent interconnect.
+
+	  If a Cortex-A53 processor is executing a store or prefetch for
+	  write instruction at the same time as a processor in another
+	  cluster is executing a cache maintenance operation to the same
+	  address, then this erratum might cause a clean cache line to be
+	  incorrectly marked as dirty.
+
+	  The workaround promotes data cache clean instructions to
+	  data cache clean-and-invalidate.
+	  Please note that this option does not necessarily enable the
+	  workaround, as it depends on the alternative framework, which will
+	  only patch the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_819472
+	bool "Cortex-A53: 819472: Store exclusive instructions might cause data corruption"
+	default y
+	select ARM64_WORKAROUND_CLEAN_CACHE
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 819472 on Cortex-A53 parts up to r0p1 with an L2 cache
+	  present when it is connected to a coherent interconnect.
+
+	  If the processor is executing a load and store exclusive sequence at
+	  the same time as a processor in another cluster is executing a cache
+	  maintenance operation to the same address, then this erratum might
+	  cause data corruption.
+
+	  The workaround promotes data cache clean instructions to
+	  data cache clean-and-invalidate.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_832075
+	bool "Cortex-A57: 832075: possible deadlock on mixing exclusive memory accesses with device loads"
+	default y
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 832075 on Cortex-A57 parts up to r1p2.
+
+	  Affected Cortex-A57 parts might deadlock when exclusive load/store
+	  instructions to Write-Back memory are mixed with Device loads.
+
+	  The workaround is to promote device loads to use Load-Acquire
+	  semantics.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_834220
+	bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
+	depends on KVM
+	default y
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 834220 on Cortex-A57 parts up to r1p2.
+
+	  Affected Cortex-A57 parts might report a Stage 2 translation
+	  fault as the result of a Stage 1 fault for load crossing a
+	  page boundary when there is a permission or device memory
+	  alignment fault at Stage 1 and a translation fault at Stage 2.
+
+	  The workaround is to verify that the Stage 1 translation
+	  doesn't generate a fault before handling the Stage 2 fault.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1742098
+	bool "Cortex-A57/A72: 1742098: ELR recorded incorrectly on interrupt taken between cryptographic instructions in a sequence"
+	depends on COMPAT
+	default y
+	help
+	  This option removes the AES hwcap for aarch32 user-space to
+	  workaround erratum 1742098 on Cortex-A57 and Cortex-A72.
+
+	  Affected parts may corrupt the AES state if an interrupt is
+	  taken between a pair of AES instructions. These instructions
+	  are only present if the cryptography extensions are present.
+	  All software should have a fallback implementation for CPUs
+	  that don't implement the cryptography extensions.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_845719
+	bool "Cortex-A53: 845719: a load might read incorrect data"
+	depends on COMPAT
+	default y
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 845719 on Cortex-A53 parts up to r0p4.
+
+	  When running a compat (AArch32) userspace on an affected Cortex-A53
+	  part, a load at EL0 from a virtual address that matches the bottom 32
+	  bits of the virtual address used by a recent load at (AArch64) EL1
+	  might return incorrect data.
+
+	  The workaround is to write the contextidr_el1 register on exception
+	  return to a 32-bit task.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_843419
+	bool "Cortex-A53: 843419: A load or store might access an incorrect address"
+	default y
+	select ARM64_MODULE_PLTS if MODULES
+	help
+	  This option links the kernel with '--fix-cortex-a53-843419' and
+	  enables PLT support to replace certain ADRP instructions, which can
+	  cause subsequent memory accesses to use an incorrect address on
+	  Cortex-A53 parts up to r0p4.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1024718
+	bool "Cortex-A55: 1024718: Update of DBM/AP bits without break before make might result in incorrect update"
+	default y
+	help
+	  This option adds a workaround for ARM Cortex-A55 Erratum 1024718.
+
+	  Affected Cortex-A55 cores (all revisions) could cause incorrect
+	  update of the hardware dirty bit when the DBM/AP bits are updated
+	  without a break-before-make. The workaround is to disable the usage
+	  of hardware DBM locally on the affected cores. CPUs not affected by
+	  this erratum will continue to use the feature.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1418040
+	bool "Cortex-A76/Neoverse-N1: MRC read following MRRC read of specific Generic Timer in AArch32 might give incorrect result"
+	default y
+	depends on COMPAT
+	help
+	  This option adds a workaround for ARM Cortex-A76/Neoverse-N1
+	  errata 1188873 and 1418040.
+
+	  Affected Cortex-A76/Neoverse-N1 cores (r0p0 to r3p1) could
+	  cause register corruption when accessing the timer registers
+	  from AArch32 userspace.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_SPECULATIVE_AT
+	bool
+
+config ARM64_ERRATUM_1165522
+	bool "Cortex-A76: 1165522: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation"
+	default y
+	select ARM64_WORKAROUND_SPECULATIVE_AT
+	help
+	  This option adds a workaround for ARM Cortex-A76 erratum 1165522.
+
+	  Affected Cortex-A76 cores (r0p0, r1p0, r2p0) could end-up with
+	  corrupted TLBs by speculating an AT instruction during a guest
+	  context switch.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1319367
+	bool "Cortex-A57/A72: 1319537: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation"
+	default y
+	select ARM64_WORKAROUND_SPECULATIVE_AT
+	help
+	  This option adds work arounds for ARM Cortex-A57 erratum 1319537
+	  and A72 erratum 1319367
+
+	  Cortex-A57 and A72 cores could end-up with corrupted TLBs by
+	  speculating an AT instruction during a guest context switch.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1530923
+	bool "Cortex-A55: 1530923: Speculative AT instruction using out-of-context translation regime could cause subsequent request to generate an incorrect translation"
+	default y
+	select ARM64_WORKAROUND_SPECULATIVE_AT
+	help
+	  This option adds a workaround for ARM Cortex-A55 erratum 1530923.
+
+	  Affected Cortex-A55 cores (r0p0, r0p1, r1p0, r2p0) could end-up with
+	  corrupted TLBs by speculating an AT instruction during a guest
+	  context switch.
+
+	  If unsure, say Y.
+
+config ARM64_WORKAROUND_REPEAT_TLBI
+	bool
+
+config ARM64_ERRATUM_1286807
+	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds a workaround for ARM Cortex-A76 erratum 1286807.
+
+	  On the affected Cortex-A76 cores (r0p0 to r3p0), if a virtual
+	  address for a cacheable mapping of a location is being
+	  accessed by a core while another core is remapping the virtual
+	  address to a new physical page using the recommended
+	  break-before-make sequence, then under very rare circumstances
+	  TLBI+DSB completes before a read using the translation being
+	  invalidated has been observed by other observers. The
+	  workaround repeats the TLBI+DSB operation.
+
+config ARM64_ERRATUM_1463225
+	bool "Cortex-A76: Software Step might prevent interrupt recognition"
+	default y
+	help
+	  This option adds a workaround for Arm Cortex-A76 erratum 1463225.
+
+	  On the affected Cortex-A76 cores (r0p0 to r3p1), software stepping
+	  of a system call instruction (SVC) can prevent recognition of
+	  subsequent interrupts when software stepping is disabled in the
+	  exception handler of the system call and either kernel debugging
+	  is enabled or VHE is in use.
+
+	  Work around the erratum by triggering a dummy step exception
+	  when handling a system call from a task that is being stepped
+	  in a VHE configuration of the kernel.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1542419
+	bool "Neoverse-N1: workaround mis-ordering of instruction fetches"
+	default y
+	help
+	  This option adds a workaround for ARM Neoverse-N1 erratum
+	  1542419.
+
+	  Affected Neoverse-N1 cores could execute a stale instruction when
+	  modified by another CPU. The workaround depends on a firmware
+	  counterpart.
+
+	  Workaround the issue by hiding the DIC feature from EL0. This
+	  forces user-space to perform cache maintenance.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_1508412
+	bool "Cortex-A77: 1508412: workaround deadlock on sequence of NC/Device load and store exclusive or PAR read"
+	default y
+	help
+	  This option adds a workaround for Arm Cortex-A77 erratum 1508412.
+
+	  Affected Cortex-A77 cores (r0p0, r1p0) could deadlock on a sequence
+	  of a store-exclusive or read of PAR_EL1 and a load with device or
+	  non-cacheable memory attributes. The workaround depends on a firmware
+	  counterpart.
+
+	  KVM guests must also have the workaround implemented or they can
+	  deadlock the system.
+
+	  Work around the issue by inserting DMB SY barriers around PAR_EL1
+	  register reads and warning KVM users. The DMB barrier is sufficient
+	  to prevent a speculative PAR_EL1 read.
+
+	  If unsure, say Y.
+
+config ARM64_ERRATUM_2457168
+	bool "Cortex-A510: 2457168: workaround for AMEVCNTR01 incrementing incorrectly"
+	depends on ARM64_AMU_EXTN
+	default y
+	help
+	  This option adds the workaround for ARM Cortex-A510 erratum 2457168.
+
+	  The AMU counter AMEVCNTR01 (constant counter) should increment at the same rate
+	  as the system counter. On affected Cortex-A510 cores AMEVCNTR01 increments
+	  incorrectly giving a significantly higher output value.
+
+	  Work around this problem by keeping the reference values of affected counters
+	  to 0 thus signaling an error case. This effect is the same to firmware disabling
+	  affected counters, in which case 0 will be returned when reading the disabled
+	  counters.
+
+	  If unsure, say Y.
+
+config CAVIUM_ERRATUM_22375
+	bool "Cavium erratum 22375, 24313"
+	default y
+	help
+	  Enable workaround for errata 22375 and 24313.
+
+	  This implements two gicv3-its errata workarounds for ThunderX. Both
+	  with a small impact affecting only ITS table allocation.
+
+	    erratum 22375: only alloc 8MB table size
+	    erratum 24313: ignore memory access type
+
+	  The fixes are in ITS initialization and basically ignore memory access
+	  type and table size provided by the TYPER and BASER registers.
+
+	  If unsure, say Y.
+
+config CAVIUM_ERRATUM_23144
+	bool "Cavium erratum 23144: ITS SYNC hang on dual socket system"
+	depends on NUMA
+	default y
+	help
+	  ITS SYNC command hang for cross node io and collections/cpu mapping.
+
+	  If unsure, say Y.
+
+config CAVIUM_ERRATUM_23154
+	bool "Cavium erratum 23154: Access to ICC_IAR1_EL1 is not sync'ed"
+	default y
+	help
+	  The gicv3 of ThunderX requires a modified version for
+	  reading the IAR status to ensure data synchronization
+	  (access to icc_iar1_el1 is not sync'ed before and after).
+
+	  If unsure, say Y.
+
+config CAVIUM_ERRATUM_27456
+	bool "Cavium erratum 27456: Broadcast TLBI instructions may cause icache corruption"
+	default y
+	help
+	  On ThunderX T88 pass 1.x through 2.1 parts, broadcast TLBI
+	  instructions may cause the icache to become corrupted if it
+	  contains data for a non-current ASID.  The fix is to
+	  invalidate the icache when changing the mm context.
+
+	  If unsure, say Y.
+
+config CAVIUM_ERRATUM_30115
+	bool "Cavium erratum 30115: Guest may disable interrupts in host"
+	default y
+	help
+	  On ThunderX T88 pass 1.x through 2.2, T81 pass 1.0 through
+	  1.2, and T83 Pass 1.0, KVM guest execution may disable
+	  interrupts in host. Trapping both GICv3 group-0 and group-1
+	  accesses sidesteps the issue.
+
+	  If unsure, say Y.
+
+config CAVIUM_TX2_ERRATUM_219
+	bool "Cavium ThunderX2 erratum 219: PRFM between TTBR change and ISB fails"
+	default y
+	help
+	  On Cavium ThunderX2, a load, store or prefetch instruction between a
+	  TTBR update and the corresponding context synchronizing operation can
+	  cause a spurious Data Abort to be delivered to any hardware thread in
+	  the CPU core.
+
+	  Work around the issue by avoiding the problematic code sequence and
+	  trapping KVM guest TTBRx_EL1 writes to EL2 when SMT is enabled. The
+	  trap handler performs the corresponding register access, skips the
+	  instruction and ensures context synchronization by virtue of the
+	  exception return.
+
+	  If unsure, say Y.
+
+config FUJITSU_ERRATUM_010001
+	bool "Fujitsu-A64FX erratum E#010001: Undefined fault may occur wrongly"
+	default y
+	help
+	  This option adds a workaround for Fujitsu-A64FX erratum E#010001.
+	  On some variants of the Fujitsu-A64FX cores ver(1.0, 1.1), memory
+	  accesses may cause undefined fault (Data abort, DFSC=0b111111).
+	  This fault occurs under a specific hardware condition when a
+	  load/store instruction performs an address translation using:
+	  case-1  TTBR0_EL1 with TCR_EL1.NFD0 == 1.
+	  case-2  TTBR0_EL2 with TCR_EL2.NFD0 == 1.
+	  case-3  TTBR1_EL1 with TCR_EL1.NFD1 == 1.
+	  case-4  TTBR1_EL2 with TCR_EL2.NFD1 == 1.
+
+	  The workaround is to ensure these bits are clear in TCR_ELx.
+	  The workaround only affects the Fujitsu-A64FX.
+
+	  If unsure, say Y.
+
+config HISILICON_ERRATUM_161600802
+	bool "Hip07 161600802: Erroneous redistributor VLPI base"
+	default y
+	help
+	  The HiSilicon Hip07 SoC uses the wrong redistributor base
+	  when issued ITS commands such as VMOVP and VMAPP, and requires
+	  a 128kB offset to be applied to the target address in this commands.
+
+	  If unsure, say Y.
+
+config QCOM_FALKOR_ERRATUM_1003
+	bool "Falkor E1003: Incorrect translation due to ASID change"
+	default y
+	help
+	  On Falkor v1, an incorrect ASID may be cached in the TLB when ASID
+	  and BADDR are changed together in TTBRx_EL1. Since we keep the ASID
+	  in TTBR1_EL1, this situation only occurs in the entry trampoline and
+	  then only for entries in the walk cache, since the leaf translation
+	  is unchanged. Work around the erratum by invalidating the walk cache
+	  entries for the trampoline before entering the kernel proper.
+
+config QCOM_FALKOR_ERRATUM_1009
+	bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  On Falkor v1, the CPU may prematurely complete a DSB following a
+	  TLBI xxIS invalidate maintenance operation. Repeat the TLBI operation
+	  one more time to fix the issue.
+
+	  If unsure, say Y.
+
+config QCOM_QDF2400_ERRATUM_0065
+	bool "QDF2400 E0065: Incorrect GITS_TYPER.ITT_Entry_size"
+	default y
+	help
+	  On Qualcomm Datacenter Technologies QDF2400 SoC, ITS hardware reports
+	  ITE size incorrectly. The GITS_TYPER.ITT_Entry_size field should have
+	  been indicated as 16Bytes (0xf), not 8Bytes (0x7).
+
+	  If unsure, say Y.
+
+config QCOM_FALKOR_ERRATUM_E1041
+	bool "Falkor E1041: Speculative instruction fetches might cause errant memory access"
+	default y
+	help
+	  Falkor CPU may speculatively fetch instructions from an improper
+	  memory location when MMU translation is changed from SCTLR_ELn[M]=1
+	  to SCTLR_ELn[M]=0. Prefix an ISB instruction to fix the problem.
+
+	  If unsure, say Y.
+
+config SOCIONEXT_SYNQUACER_PREITS
+	bool "Socionext Synquacer: Workaround for GICv3 pre-ITS"
+	default y
+	help
+	  Socionext Synquacer SoCs implement a separate h/w block to generate
+	  MSI doorbell writes with non-zero values for the device ID.
+
+	  If unsure, say Y.
+
+endmenu
+
+
+choice
+	prompt "Page size"
+	default ARM64_4K_PAGES
+	help
+	  Page size (translation granule) configuration.
+
+config ARM64_4K_PAGES
+	bool "4KB"
+	help
+	  This feature enables 4KB pages support.
+
+config ARM64_16K_PAGES
+	bool "16KB"
+	help
+	  The system will use 16KB pages support. AArch32 emulation
+	  requires applications compiled with 16K (or a multiple of 16K)
+	  aligned segments.
+
+config ARM64_64K_PAGES
+	bool "64KB"
+	help
+	  This feature enables 64KB pages support (4KB by default)
+	  allowing only two levels of page tables and faster TLB
+	  look-up. AArch32 emulation requires applications compiled
+	  with 64K aligned segments.
+
+endchoice
+
+choice
+	prompt "Virtual address space size"
+	default ARM64_VA_BITS_39 if ARM64_4K_PAGES
+	default ARM64_VA_BITS_47 if ARM64_16K_PAGES
+	default ARM64_VA_BITS_42 if ARM64_64K_PAGES
+	help
+	  Allows choosing one of multiple possible virtual address
+	  space sizes. The level of translation table is determined by
+	  a combination of page size and virtual address space size.
+
+config ARM64_VA_BITS_36
+	bool "36-bit" if EXPERT
+	depends on ARM64_16K_PAGES
+
+config ARM64_VA_BITS_39
+	bool "39-bit"
+	depends on ARM64_4K_PAGES
+
+config ARM64_VA_BITS_42
+	bool "42-bit"
+	depends on ARM64_64K_PAGES
+
+config ARM64_VA_BITS_47
+	bool "47-bit"
+	depends on ARM64_16K_PAGES
+
+config ARM64_VA_BITS_48
+	bool "48-bit"
+
+config ARM64_VA_BITS_52
+	bool "52-bit"
+	depends on ARM64_64K_PAGES && (ARM64_PAN || !ARM64_SW_TTBR0_PAN)
+	help
+	  Enable 52-bit virtual addressing for userspace when explicitly
+	  requested via a hint to mmap(). The kernel will also use 52-bit
+	  virtual addresses for its own mappings (provided HW support for
+	  this feature is available, otherwise it reverts to 48-bit).
+
+	  NOTE: Enabling 52-bit virtual addressing in conjunction with
+	  ARMv8.3 Pointer Authentication will result in the PAC being
+	  reduced from 7 bits to 3 bits, which may have a significant
+	  impact on its susceptibility to brute-force attacks.
+
+	  If unsure, select 48-bit virtual addressing instead.
+
+endchoice
+
+config ARM64_FORCE_52BIT
+	bool "Force 52-bit virtual addresses for userspace"
+	depends on ARM64_VA_BITS_52 && EXPERT
+	help
+	  For systems with 52-bit userspace VAs enabled, the kernel will attempt
+	  to maintain compatibility with older software by providing 48-bit VAs
+	  unless a hint is supplied to mmap.
+
+	  This configuration option disables the 48-bit compatibility logic, and
+	  forces all userspace addresses to be 52-bit on HW that supports it. One
+	  should only enable this configuration option for stress testing userspace
+	  memory management code. If unsure say N here.
+
+config ARM64_VA_BITS
+	int
+	default 36 if ARM64_VA_BITS_36
+	default 39 if ARM64_VA_BITS_39
+	default 42 if ARM64_VA_BITS_42
+	default 47 if ARM64_VA_BITS_47
+	default 48 if ARM64_VA_BITS_48
+	default 52 if ARM64_VA_BITS_52
+
+choice
+	prompt "Physical address space size"
+	default ARM64_PA_BITS_48
+	help
+	  Choose the maximum physical address range that the kernel will
+	  support.
+
+config ARM64_PA_BITS_48
+	bool "48-bit"
+
+config ARM64_PA_BITS_52
+	bool "52-bit (ARMv8.2)"
+	depends on ARM64_64K_PAGES
+	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
+	help
+	  Enable support for a 52-bit physical address space, introduced as
+	  part of the ARMv8.2-LPA extension.
+
+	  With this enabled, the kernel will also continue to work on CPUs that
+	  do not support ARMv8.2-LPA, but with some added memory overhead (and
+	  minor performance overhead).
+
+endchoice
+
+config ARM64_PA_BITS
+	int
+	default 48 if ARM64_PA_BITS_48
+	default 52 if ARM64_PA_BITS_52
+
+choice
+	prompt "Endianness"
+	default CPU_LITTLE_ENDIAN
+	help
+	  Select the endianness of data accesses performed by the CPU. Userspace
+	  applications will need to be compiled and linked for the endianness
+	  that is selected here.
+
+config CPU_BIG_ENDIAN
+	bool "Build big-endian kernel"
+	depends on !LD_IS_LLD || LLD_VERSION >= 130000
+	# https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
+	depends on AS_IS_GNU || AS_VERSION >= 150000
+	help
+	  Say Y if you plan on running a kernel with a big-endian userspace.
+
+config CPU_LITTLE_ENDIAN
+	bool "Build little-endian kernel"
+	help
+	  Say Y if you plan on running a kernel with a little-endian userspace.
+	  This is usually the case for distributions targeting arm64.
+
+endchoice
+
+config SCHED_MC
+	bool "Multi-core scheduler support"
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
+config SCHED_SMT
+	bool "SMT scheduler support"
+	help
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
+
+config NR_CPUS
+	int "Maximum number of CPUs (2-4096)"
+	range 2 4096
+	default "256"
+
+config HOTPLUG_CPU
+	bool "Support for hot-pluggable CPUs"
+	select GENERIC_IRQ_MIGRATION
+	help
+	  Say Y here to experiment with turning CPUs off and on.  CPUs
+	  can be controlled through /sys/devices/system/cpu.
+
+# Common NUMA Features
+config NUMA
+	bool "NUMA Memory Allocation and Scheduler Support"
+	select ACPI_NUMA if ACPI
+	select OF_NUMA
+	help
+	  Enable NUMA (Non-Uniform Memory Access) support.
+
+	  The kernel will try to allocate memory used by a CPU on the
+	  local memory of the CPU and add some more
+	  NUMA awareness to the kernel.
+
+config NODES_SHIFT
+	int "Maximum NUMA Nodes (as a power of 2)"
+	range 1 10
+	default "4"
+	depends on NEED_MULTIPLE_NODES
+	help
+	  Specify the maximum number of NUMA Nodes available on the target
+	  system.  Increases memory reserved to accommodate various tables.
+
+config USE_PERCPU_NUMA_NODE_ID
+	def_bool y
+	depends on NUMA
+
+config HAVE_SETUP_PER_CPU_AREA
+	def_bool y
+	depends on NUMA
+
+config NEED_PER_CPU_EMBED_FIRST_CHUNK
+	def_bool y
+	depends on NUMA
+
+config HOLES_IN_ZONE
+	def_bool y
+
+source "kernel/Kconfig.hz"
+
+config ARCH_SUPPORTS_DEBUG_PAGEALLOC
+	def_bool y
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool ARCH_SPARSEMEM_ENABLE
+
+config ARCH_SELECT_MEMORY_MODEL
+	def_bool ARCH_SPARSEMEM_ENABLE
+
+config ARCH_FLATMEM_ENABLE
+	def_bool !NUMA
+
+config HAVE_ARCH_PFN_VALID
+	def_bool y
+
+config HW_PERF_EVENTS
+	def_bool y
+	depends on ARM_PMU
+
+config SYS_SUPPORTS_HUGETLBFS
+	def_bool y
+
+config ARCH_WANT_HUGE_PMD_SHARE
+
+config ARCH_HAS_CACHE_LINE_SIZE
+	def_bool y
+
+config ARCH_ENABLE_SPLIT_PMD_PTLOCK
+	def_bool y if PGTABLE_LEVELS > 2
+
+# Supported by clang >= 7.0
+config CC_HAVE_SHADOW_CALL_STACK
+	def_bool $(cc-option, -fsanitize=shadow-call-stack -ffixed-x18)
+
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.
+
+config PARAVIRT_TIME_ACCOUNTING
+	bool "Paravirtual steal time accounting"
+	select PARAVIRT
+	help
+	  Select this option to enable fine granularity task steal time
+	  accounting. Time spent executing other tasks in parallel with
+	  the current vCPU is discounted from the vCPU power. To account for
+	  that, there can be a small performance impact.
+
+	  If in doubt, say N here.
+
+config KEXEC
+	depends on PM_SLEEP_SMP
+	select KEXEC_CORE
+	bool "kexec system call"
+	help
+	  kexec is a system call that implements the ability to shutdown your
+	  current kernel, and to start another kernel.  It is like a reboot
+	  but it is independent of the system firmware.   And like a reboot
+	  you can start any kernel with it, not just Linux.
+
+config KEXEC_FILE
+	bool "kexec file based system call"
+	select KEXEC_CORE
+	help
+	  This is new version of kexec system call. This system call is
+	  file based and takes file descriptors as system call argument
+	  for kernel and initramfs as opposed to list of segments as
+	  accepted by previous system call.
+
+config KEXEC_SIG
+	bool "Verify kernel signature during kexec_file_load() syscall"
+	depends on KEXEC_FILE
+	help
+	  Select this option to verify a signature with loaded kernel
+	  image. If configured, any attempt of loading a image without
+	  valid signature will fail.
+
+	  In addition to that option, you need to enable signature
+	  verification for the corresponding kernel image type being
+	  loaded in order for this to work.
+
+config KEXEC_IMAGE_VERIFY_SIG
+	bool "Enable Image signature verification support"
+	default y
+	depends on KEXEC_SIG
+	depends on EFI && SIGNED_PE_FILE_VERIFICATION
+	help
+	  Enable Image signature verification support.
+
+comment "Support for PE file signature verification disabled"
+	depends on KEXEC_SIG
+	depends on !EFI || !SIGNED_PE_FILE_VERIFICATION
+
+config CRASH_DUMP
+	bool "Build kdump crash kernel"
+	help
+	  Generate crash dump after being started by kexec. This should
+	  be normally only set in special crash dump kernels which are
+	  loaded in the main kernel with kexec-tools into a specially
+	  reserved region and then later executed after a crash by
+	  kdump/kexec.
+
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
+
+config XEN_DOM0
+	def_bool y
+	depends on XEN
+
+config XEN
+	bool "Xen guest support on ARM64"
+	depends on ARM64 && OF
+	select SWIOTLB_XEN
+	select PARAVIRT
+	help
+	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM64.
+
+config FORCE_MAX_ZONEORDER
+	int
+	default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
+	default "12" if (ARM64_16K_PAGES && TRANSPARENT_HUGEPAGE)
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+	  We make sure that we can allocate upto a HugePage size for each configuration.
+	  Hence we have :
+		MAX_ORDER = (PMD_SHIFT - PAGE_SHIFT) + 1 => PAGE_SHIFT - 2
+
+	  However for 4K, we choose a higher default value, 11 as opposed to 10, giving us
+	  4M allocations matching the default size used by generic code.
+
+config UNMAP_KERNEL_AT_EL0
+	bool "Unmap kernel when running in userspace (aka \"KAISER\")" if EXPERT
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  be used to bypass MMU permission checks and leak kernel data to
+	  userspace. This can be defended against by unmapping the kernel
+	  when running in userspace, mapping it back in on exception entry
+	  via a trampoline page in the vector table.
+
+	  If unsure, say Y.
+
+config MITIGATE_SPECTRE_BRANCH_HISTORY
+	bool "Mitigate Spectre style attacks against branch history" if EXPERT
+	default y
+	help
+	  Speculation attacks against some high-performance processors can
+	  make use of branch history to influence future speculation.
+	  When taking an exception from user-space, a sequence of branches
+	  or a firmware call overwrites the branch history.
+
+config RODATA_FULL_DEFAULT_ENABLED
+	bool "Apply r/o permissions of VM areas also to their linear aliases"
+	default y
+	help
+	  Apply read-only attributes of VM areas to the linear alias of
+	  the backing pages as well. This prevents code or read-only data
+	  from being modified (inadvertently or intentionally) via another
+	  mapping of the same memory page. This additional enhancement can
+	  be turned off at runtime by passing rodata=[off|on] (and turned on
+	  with rodata=full if this option is set to 'n')
+
+	  This requires the linear region to be mapped down to pages,
+	  which may adversely affect performance in some cases.
+
+config ARM64_SW_TTBR0_PAN
+	bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
+	help
+	  Enabling this option prevents the kernel from accessing
+	  user-space memory directly by pointing TTBR0_EL1 to a reserved
+	  zeroed area and reserved ASID. The user access routines
+	  restore the valid TTBR0_EL1 temporarily.
+
+config ARM64_TAGGED_ADDR_ABI
+	bool "Enable the tagged user addresses syscall ABI"
+	default y
+	help
+	  When this option is enabled, user applications can opt in to a
+	  relaxed ABI via prctl() allowing tagged addresses to be passed
+	  to system calls as pointer arguments. For details, see
+	  Documentation/arm64/tagged-address-abi.rst.
+
+menuconfig COMPAT
+	bool "Kernel support for 32-bit EL0"
+	depends on ARM64_4K_PAGES || EXPERT
+	select COMPAT_BINFMT_ELF if BINFMT_ELF
+	select HAVE_UID16
+	select OLD_SIGSUSPEND3
+	select COMPAT_OLD_SIGACTION
+	help
+	  This option enables support for a 32-bit EL0 running under a 64-bit
+	  kernel at EL1. AArch32-specific components such as system calls,
+	  the user helper functions, VFP support and the ptrace interface are
+	  handled appropriately by the kernel.
+
+	  If you use a page size other than 4KB (i.e, 16KB or 64KB), please be aware
+	  that you will only be able to execute AArch32 binaries that were compiled
+	  with page size aligned segments.
+
+	  If you want to execute 32-bit userspace applications, say Y.
+
+if COMPAT
+
+config KUSER_HELPERS
+	bool "Enable kuser helpers page for 32-bit applications"
+	default y
+	help
+	  Warning: disabling this option may break 32-bit user programs.
+
+	  Provide kuser helpers to compat tasks. The kernel provides
+	  helper code to userspace in read only form at a fixed location
+	  to allow userspace to be independent of the CPU type fitted to
+	  the system. This permits binaries to be run on ARMv4 through
+	  to ARMv8 without modification.
+
+	  See Documentation/arm/kernel_user_helpers.rst for details.
+
+	  However, the fixed address nature of these helpers can be used
+	  by ROP (return orientated programming) authors when creating
+	  exploits.
+
+	  If all of the binaries and libraries which run on your platform
+	  are built specifically for your platform, and make no use of
+	  these helpers, then you can turn this option off to hinder
+	  such exploits. However, in that case, if a binary or library
+	  relying on those helpers is run, it will not function correctly.
+
+	  Say N here only if you are absolutely certain that you do not
+	  need these helpers; otherwise, the safe option is to say Y.
+
+config COMPAT_VDSO
+	bool "Enable vDSO for 32-bit applications"
+	depends on !CPU_BIG_ENDIAN
+	depends on (CC_IS_CLANG && LD_IS_LLD) || "$(CROSS_COMPILE_COMPAT)" != ""
+	select GENERIC_COMPAT_VDSO
+	default y
+	help
+	  Place in the process address space of 32-bit applications an
+	  ELF shared object providing fast implementations of gettimeofday
+	  and clock_gettime.
+
+	  You must have a 32-bit build of glibc 2.22 or later for programs
+	  to seamlessly take advantage of this.
+
+config THUMB2_COMPAT_VDSO
+	bool "Compile the 32-bit vDSO for Thumb-2 mode" if EXPERT
+	depends on COMPAT_VDSO
+	default y
+	help
+	  Compile the compat vDSO with '-mthumb -fomit-frame-pointer' if y,
+	  otherwise with '-marm'.
+
+menuconfig ARMV8_DEPRECATED
+	bool "Emulate deprecated/obsolete ARMv8 instructions"
+	depends on SYSCTL
+	help
+	  Legacy software support may require certain instructions
+	  that have been deprecated or obsoleted in the architecture.
+
+	  Enable this config to enable selective emulation of these
+	  features.
+
+	  If unsure, say Y
+
+if ARMV8_DEPRECATED
+
+config SWP_EMULATION
+	bool "Emulate SWP/SWPB instructions"
+	help
+	  ARMv8 obsoletes the use of A32 SWP/SWPB instructions such that
+	  they are always undefined. Say Y here to enable software
+	  emulation of these instructions for userspace using LDXR/STXR.
+	  This feature can be controlled at runtime with the abi.swp
+	  sysctl which is disabled by default.
+
+	  In some older versions of glibc [<=2.8] SWP is used during futex
+	  trylock() operations with the assumption that the code will not
+	  be preempted. This invalid assumption may be more likely to fail
+	  with SWP emulation enabled, leading to deadlock of the user
+	  application.
+
+	  NOTE: when accessing uncached shared regions, LDXR/STXR rely
+	  on an external transaction monitoring block called a global
+	  monitor to maintain update atomicity. If your system does not
+	  implement a global monitor, this option can cause programs that
+	  perform SWP operations to uncached memory to deadlock.
+
+	  If unsure, say Y
+
+config CP15_BARRIER_EMULATION
+	bool "Emulate CP15 Barrier instructions"
+	help
+	  The CP15 barrier instructions - CP15ISB, CP15DSB, and
+	  CP15DMB - are deprecated in ARMv8 (and ARMv7). It is
+	  strongly recommended to use the ISB, DSB, and DMB
+	  instructions instead.
+
+	  Say Y here to enable software emulation of these
+	  instructions for AArch32 userspace code. When this option is
+	  enabled, CP15 barrier usage is traced which can help
+	  identify software that needs updating. This feature can be
+	  controlled at runtime with the abi.cp15_barrier sysctl.
+
+	  If unsure, say Y
+
+config SETEND_EMULATION
+	bool "Emulate SETEND instruction"
+	help
+	  The SETEND instruction alters the data-endianness of the
+	  AArch32 EL0, and is deprecated in ARMv8.
+
+	  Say Y here to enable software emulation of the instruction
+	  for AArch32 userspace code. This feature can be controlled
+	  at runtime with the abi.setend sysctl.
+
+	  Note: All the cpus on the system must have mixed endian support at EL0
+	  for this feature to be enabled. If a new CPU - which doesn't support mixed
+	  endian - is hotplugged in after this feature has been enabled, there could
+	  be unexpected results in the applications.
+
+	  If unsure, say Y
+endif
+
+endif
+
+menu "ARMv8.1 architectural features"
+
+config ARM64_HW_AFDBM
+	bool "Support for hardware updates of the Access and Dirty page flags"
+	default y
+	help
+	  The ARMv8.1 architecture extensions introduce support for
+	  hardware updates of the access and dirty information in page
+	  table entries. When enabled in TCR_EL1 (HA and HD bits) on
+	  capable processors, accesses to pages with PTE_AF cleared will
+	  set this bit instead of raising an access flag fault.
+	  Similarly, writes to read-only pages with the DBM bit set will
+	  clear the read-only bit (AP[2]) instead of raising a
+	  permission fault.
+
+	  Kernels built with this configuration option enabled continue
+	  to work on pre-ARMv8.1 hardware and the performance impact is
+	  minimal. If unsure, say Y.
+
+config ARM64_PAN
+	bool "Enable support for Privileged Access Never (PAN)"
+	default y
+	help
+	 Privileged Access Never (PAN; part of the ARMv8.1 Extensions)
+	 prevents the kernel or hypervisor from accessing user-space (EL0)
+	 memory directly.
+
+	 Choosing this option will cause any unprotected (not using
+	 copy_to_user et al) memory access to fail with a permission fault.
+
+	 The feature is detected at runtime, and will remain as a 'nop'
+	 instruction if the cpu does not implement the feature.
+
+config AS_HAS_LSE_ATOMICS
+	def_bool $(as-instr,.arch_extension lse)
+
+config ARM64_LSE_ATOMICS
+	bool
+	default ARM64_USE_LSE_ATOMICS
+	depends on AS_HAS_LSE_ATOMICS
+
+config ARM64_USE_LSE_ATOMICS
+	bool "Atomic instructions"
+	depends on JUMP_LABEL
+	default y
+	help
+	  As part of the Large System Extensions, ARMv8.1 introduces new
+	  atomic instructions that are designed specifically to scale in
+	  very large systems.
+
+	  Say Y here to make use of these instructions for the in-kernel
+	  atomic routines. This incurs a small overhead on CPUs that do
+	  not support these instructions and requires the kernel to be
+	  built with binutils >= 2.25 in order for the new instructions
+	  to be used.
+
+config ARM64_VHE
+	bool "Enable support for Virtualization Host Extensions (VHE)"
+	default y
+	help
+	  Virtualization Host Extensions (VHE) allow the kernel to run
+	  directly at EL2 (instead of EL1) on processors that support
+	  it. This leads to better performance for KVM, as they reduce
+	  the cost of the world switch.
+
+	  Selecting this option allows the VHE feature to be detected
+	  at runtime, and does not affect processors that do not
+	  implement this feature.
+
+endmenu
+
+menu "ARMv8.2 architectural features"
+
+config ARM64_UAO
+	bool "Enable support for User Access Override (UAO)"
+	default y
+	help
+	  User Access Override (UAO; part of the ARMv8.2 Extensions)
+	  causes the 'unprivileged' variant of the load/store instructions to
+	  be overridden to be privileged.
+
+	  This option changes get_user() and friends to use the 'unprivileged'
+	  variant of the load/store instructions. This ensures that user-space
+	  really did have access to the supplied memory. When addr_limit is
+	  set to kernel memory the UAO bit will be set, allowing privileged
+	  access to kernel memory.
+
+	  Choosing this option will cause copy_to_user() et al to use user-space
+	  memory permissions.
+
+	  The feature is detected at runtime, the kernel will use the
+	  regular load/store instructions if the cpu does not implement the
+	  feature.
+
+config ARM64_PMEM
+	bool "Enable support for persistent memory"
+	select ARCH_HAS_PMEM_API
+	select ARCH_HAS_UACCESS_FLUSHCACHE
+	help
+	  Say Y to enable support for the persistent memory API based on the
+	  ARMv8.2 DCPoP feature.
+
+	  The feature is detected at runtime, and the kernel will use DC CVAC
+	  operations if DC CVAP is not supported (following the behaviour of
+	  DC CVAP itself if the system does not define a point of persistence).
+
+config ARM64_RAS_EXTN
+	bool "Enable support for RAS CPU Extensions"
+	default y
+	help
+	  CPUs that support the Reliability, Availability and Serviceability
+	  (RAS) Extensions, part of ARMv8.2 are able to track faults and
+	  errors, classify them and report them to software.
+
+	  On CPUs with these extensions system software can use additional
+	  barriers to determine if faults are pending and read the
+	  classification from a new set of registers.
+
+	  Selecting this feature will allow the kernel to use these barriers
+	  and access the new registers if the system supports the extension.
+	  Platform RAS features may additionally depend on firmware support.
+
+config ARM64_CNP
+	bool "Enable support for Common Not Private (CNP) translations"
+	default y
+	depends on ARM64_PAN || !ARM64_SW_TTBR0_PAN
+	help
+	  Common Not Private (CNP) allows translation table entries to
+	  be shared between different PEs in the same inner shareable
+	  domain, so the hardware can use this fact to optimise the
+	  caching of such entries in the TLB.
+
+	  Selecting this option allows the CNP feature to be detected
+	  at runtime, and does not affect PEs that do not implement
+	  this feature.
+
+endmenu
+
+menu "ARMv8.3 architectural features"
+
+config ARM64_PTR_AUTH
+	bool "Enable support for pointer authentication"
+	default y
+	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_PAC
+	# Modern compilers insert a .note.gnu.property section note for PAC
+	# which is only understood by binutils starting with version 2.33.1.
+	depends on LD_IS_LLD || LD_VERSION >= 233010000 || (CC_IS_GCC && GCC_VERSION < 90100)
+	depends on !CC_IS_CLANG || AS_HAS_CFI_NEGATE_RA_STATE
+	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
+	help
+	  Pointer authentication (part of the ARMv8.3 Extensions) provides
+	  instructions for signing and authenticating pointers against secret
+	  keys, which can be used to mitigate Return Oriented Programming (ROP)
+	  and other attacks.
+
+	  This option enables these instructions at EL0 (i.e. for userspace).
+	  Choosing this option will cause the kernel to initialise secret keys
+	  for each process at exec() time, with these keys being
+	  context-switched along with the process.
+
+	  If the compiler supports the -mbranch-protection or
+	  -msign-return-address flag (e.g. GCC 7 or later), then this option
+	  will also cause the kernel itself to be compiled with return address
+	  protection. In this case, and if the target hardware is known to
+	  support pointer authentication, then CONFIG_STACKPROTECTOR can be
+	  disabled with minimal loss of protection.
+
+	  The feature is detected at runtime. If the feature is not present in
+	  hardware it will not be advertised to userspace/KVM guest nor will it
+	  be enabled.
+
+	  If the feature is present on the boot CPU but not on a late CPU, then
+	  the late CPU will be parked. Also, if the boot CPU does not have
+	  address auth and the late CPU has then the late CPU will still boot
+	  but with the feature disabled. On such a system, this option should
+	  not be selected.
+
+	  This feature works with FUNCTION_GRAPH_TRACER option only if
+	  DYNAMIC_FTRACE_WITH_REGS is enabled.
+
+config CC_HAS_BRANCH_PROT_PAC_RET
+	# GCC 9 or later, clang 8 or later
+	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf)
+
+config CC_HAS_SIGN_RETURN_ADDRESS
+	# GCC 7, 8
+	def_bool $(cc-option,-msign-return-address=all)
+
+config AS_HAS_PAC
+	def_bool $(cc-option,-Wa$(comma)-march=armv8.3-a)
+
+config AS_HAS_CFI_NEGATE_RA_STATE
+	def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
+
+endmenu
+
+menu "ARMv8.4 architectural features"
+
+config ARM64_AMU_EXTN
+	bool "Enable support for the Activity Monitors Unit CPU extension"
+	default y
+	help
+	  The activity monitors extension is an optional extension introduced
+	  by the ARMv8.4 CPU architecture. This enables support for version 1
+	  of the activity monitors architecture, AMUv1.
+
+	  To enable the use of this extension on CPUs that implement it, say Y.
+
+	  Note that for architectural reasons, firmware _must_ implement AMU
+	  support when running on CPUs that present the activity monitors
+	  extension. The required support is present in:
+	    * Version 1.5 and later of the ARM Trusted Firmware
+
+	  For kernels that have this configuration enabled but boot with broken
+	  firmware, you may need to say N here until the firmware is fixed.
+	  Otherwise you may experience firmware panics or lockups when
+	  accessing the counter registers. Even if you are not observing these
+	  symptoms, the values returned by the register reads might not
+	  correctly reflect reality. Most commonly, the value read will be 0,
+	  indicating that the counter is not enabled.
+
+config AS_HAS_ARMV8_4
+	def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a)
+
+config ARM64_TLB_RANGE
+	bool "Enable support for tlbi range feature"
+	default y
+	depends on AS_HAS_ARMV8_4
+	help
+	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
+	  range of input addresses.
+
+	  The feature introduces new assembly instructions, and they were
+	  support when binutils >= 2.30.
+
+endmenu
+
+menu "ARMv8.5 architectural features"
+
+config ARM64_BTI
+	bool "Branch Target Identification support"
+	default y
+	help
+	  Branch Target Identification (part of the ARMv8.5 Extensions)
+	  provides a mechanism to limit the set of locations to which computed
+	  branch instructions such as BR or BLR can jump.
+
+	  To make use of BTI on CPUs that support it, say Y.
+
+	  BTI is intended to provide complementary protection to other control
+	  flow integrity protection mechanisms, such as the Pointer
+	  authentication mechanism provided as part of the ARMv8.3 Extensions.
+	  For this reason, it does not make sense to enable this option without
+	  also enabling support for pointer authentication.  Thus, when
+	  enabling this option you should also select ARM64_PTR_AUTH=y.
+
+	  Userspace binaries must also be specifically compiled to make use of
+	  this mechanism.  If you say N here or the hardware does not support
+	  BTI, such binaries can still run, but you get no additional
+	  enforcement of branch destinations.
+
+config ARM64_BTI_KERNEL
+	bool "Use Branch Target Identification for kernel"
+	default y
+	depends on ARM64_BTI
+	depends on ARM64_PTR_AUTH
+	depends on CC_HAS_BRANCH_PROT_PAC_RET_BTI
+	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94697
+	depends on !CC_IS_GCC || GCC_VERSION >= 100100
+	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671
+	depends on !CC_IS_GCC
+	# https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9
+	depends on !CC_IS_CLANG || CLANG_VERSION >= 120000
+	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
+	help
+	  Build the kernel with Branch Target Identification annotations
+	  and enable enforcement of this for kernel code. When this option
+	  is enabled and the system supports BTI all kernel code including
+	  modular code must have BTI enabled.
+
+config CC_HAS_BRANCH_PROT_PAC_RET_BTI
+	# GCC 9 or later, clang 8 or later
+	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf+bti)
+
+config ARM64_E0PD
+	bool "Enable support for E0PD"
+	default y
+	help
+	  E0PD (part of the ARMv8.5 extensions) allows us to ensure
+	  that EL0 accesses made via TTBR1 always fault in constant time,
+	  providing similar benefits to KASLR as those provided by KPTI, but
+	  with lower overhead and without disrupting legitimate access to
+	  kernel memory such as SPE.
+
+	  This option enables E0PD for TTBR1 where available.
+
+config ARCH_RANDOM
+	bool "Enable support for random number generation"
+	default y
+	help
+	  Random number generation (part of the ARMv8.5 Extensions)
+	  provides a high bandwidth, cryptographically secure
+	  hardware random number generator.
+
+config ARM64_AS_HAS_MTE
+	# Initial support for MTE went in binutils 2.32.0, checked with
+	# ".arch armv8.5-a+memtag" below. However, this was incomplete
+	# as a late addition to the final architecture spec (LDGM/STGM)
+	# is only supported in the newer 2.32.x and 2.33 binutils
+	# versions, hence the extra "stgm" instruction check below.
+	def_bool $(as-instr,.arch armv8.5-a+memtag\nstgm xzr$(comma)[x0])
+
+config ARM64_MTE
+	bool "Memory Tagging Extension support"
+	default y
+	depends on ARM64_AS_HAS_MTE && ARM64_TAGGED_ADDR_ABI
+	depends on AS_HAS_LSE_ATOMICS
+	select ARCH_USES_HIGH_VMA_FLAGS
+	help
+	  Memory Tagging (part of the ARMv8.5 Extensions) provides
+	  architectural support for run-time, always-on detection of
+	  various classes of memory error to aid with software debugging
+	  to eliminate vulnerabilities arising from memory-unsafe
+	  languages.
+
+	  This option enables the support for the Memory Tagging
+	  Extension at EL0 (i.e. for userspace).
+
+	  Selecting this option allows the feature to be detected at
+	  runtime. Any secondary CPU not implementing this feature will
+	  not be allowed a late bring-up.
+
+	  Userspace binaries that want to use this feature must
+	  explicitly opt in. The mechanism for the userspace is
+	  described in:
+
+	  Documentation/arm64/memory-tagging-extension.rst.
+
+endmenu
+
+config ARM64_SVE
+	bool "ARM Scalable Vector Extension support"
+	default y
+	depends on !KVM || ARM64_VHE
+	help
+	  The Scalable Vector Extension (SVE) is an extension to the AArch64
+	  execution state which complements and extends the SIMD functionality
+	  of the base architecture to support much larger vectors and to enable
+	  additional vectorisation opportunities.
+
+	  To enable use of this extension on CPUs that implement it, say Y.
+
+	  On CPUs that support the SVE2 extensions, this option will enable
+	  those too.
+
+	  Note that for architectural reasons, firmware _must_ implement SVE
+	  support when running on SVE capable hardware.  The required support
+	  is present in:
+
+	    * version 1.5 and later of the ARM Trusted Firmware
+	    * the AArch64 boot wrapper since commit 5e1261e08abf
+	      ("bootwrapper: SVE: Enable SVE for EL2 and below").
+
+	  For other firmware implementations, consult the firmware documentation
+	  or vendor.
+
+	  If you need the kernel to boot on SVE-capable hardware with broken
+	  firmware, you may need to say N here until you get your firmware
+	  fixed.  Otherwise, you may experience firmware panics or lockups when
+	  booting the kernel.  If unsure and you are not observing these
+	  symptoms, you should assume that it is safe to say Y.
+
+	  CPUs that support SVE are architecturally required to support the
+	  Virtualization Host Extensions (VHE), so the kernel makes no
+	  provision for supporting SVE alongside KVM without VHE enabled.
+	  Thus, you will need to enable CONFIG_ARM64_VHE if you want to support
+	  KVM in the same kernel image.
+
+config ARM64_MODULE_PLTS
+	bool "Use PLTs to allow module memory to spill over into vmalloc area"
+	depends on MODULES
+	select HAVE_MOD_ARCH_SPECIFIC
+	help
+	  Allocate PLTs when loading modules so that jumps and calls whose
+	  targets are too far away for their relative offsets to be encoded
+	  in the instructions themselves can be bounced via veneers in the
+	  module's PLT. This allows modules to be allocated in the generic
+	  vmalloc area after the dedicated module memory area has been
+	  exhausted.
+
+	  When running with address space randomization (KASLR), the module
+	  region itself may be too far away for ordinary relative jumps and
+	  calls, and so in that case, module PLTs are required and cannot be
+	  disabled.
+
+	  Specific errata workaround(s) might also force module PLTs to be
+	  enabled (ARM64_ERRATUM_843419).
+
+config ARM64_PSEUDO_NMI
+	bool "Support for NMI-like interrupts"
+	select ARM_GIC_V3
+	help
+	  Adds support for mimicking Non-Maskable Interrupts through the use of
+	  GIC interrupt priority. This support requires version 3 or later of
+	  ARM GIC.
+
+	  This high priority configuration for interrupts needs to be
+	  explicitly enabled by setting the kernel parameter
+	  "irqchip.gicv3_pseudo_nmi" to 1.
+
+	  If unsure, say N
+
+if ARM64_PSEUDO_NMI
+config ARM64_DEBUG_PRIORITY_MASKING
+	bool "Debug interrupt priority masking"
+	help
+	  This adds runtime checks to functions enabling/disabling
+	  interrupts when using priority masking. The additional checks verify
+	  the validity of ICC_PMR_EL1 when calling concerned functions.
+
+	  If unsure, say N
+endif
+
+config RELOCATABLE
+	bool "Build a relocatable kernel image" if EXPERT
+	select ARCH_HAS_RELR
+	default y
+	help
+	  This builds the kernel as a Position Independent Executable (PIE),
+	  which retains all relocation metadata required to relocate the
+	  kernel binary at runtime to a different virtual address than the
+	  address it was linked at.
+	  Since AArch64 uses the RELA relocation format, this requires a
+	  relocation pass at runtime even if the kernel is loaded at the
+	  same address it was linked at.
+
+config RANDOMIZE_BASE
+	bool "Randomize the address of the kernel image"
+	select ARM64_MODULE_PLTS if MODULES
+	select RELOCATABLE
+	help
+	  Randomizes the virtual address at which the kernel image is
+	  loaded, as a security feature that deters exploit attempts
+	  relying on knowledge of the location of kernel internals.
+
+	  It is the bootloader's job to provide entropy, by passing a
+	  random u64 value in /chosen/kaslr-seed at kernel entry.
+
+	  When booting via the UEFI stub, it will invoke the firmware's
+	  EFI_RNG_PROTOCOL implementation (if available) to supply entropy
+	  to the kernel proper. In addition, it will randomise the physical
+	  location of the kernel Image as well.
+
+	  If unsure, say N.
+
+config RANDOMIZE_MODULE_REGION_FULL
+	bool "Randomize the module region over a 4 GB range"
+	depends on RANDOMIZE_BASE
+	default y
+	help
+	  Randomizes the location of the module region inside a 4 GB window
+	  covering the core kernel. This way, it is less likely for modules
+	  to leak information about the location of core kernel data structures
+	  but it does imply that function calls between modules and the core
+	  kernel will need to be resolved via veneers in the module PLT.
+
+	  When this option is not set, the module region will be randomized over
+	  a limited range that contains the [_stext, _etext] interval of the
+	  core kernel, so branch relocations are always in range.
+
+config CC_HAVE_STACKPROTECTOR_SYSREG
+	def_bool $(cc-option,-mstack-protector-guard=sysreg -mstack-protector-guard-reg=sp_el0 -mstack-protector-guard-offset=0)
+
+config STACKPROTECTOR_PER_TASK
+	def_bool y
+	depends on STACKPROTECTOR && CC_HAVE_STACKPROTECTOR_SYSREG
+
+endmenu
+
+menu "Boot options"
+
+config ARM64_ACPI_PARKING_PROTOCOL
+	bool "Enable support for the ARM64 ACPI parking protocol"
+	depends on ACPI
+	help
+	  Enable support for the ARM64 ACPI parking protocol. If disabled
+	  the kernel will not allow booting through the ARM64 ACPI parking
+	  protocol even if the corresponding data is present in the ACPI
+	  MADT table.
+
+config CMDLINE
+	string "Default kernel command string"
+	default ""
+	help
+	  Provide a set of default command-line options at build time by
+	  entering them here. As a minimum, you should specify the the
+	  root device (e.g. root=/dev/nfs).
+
+config CMDLINE_FORCE
+	bool "Always use the default kernel command string"
+	depends on CMDLINE != ""
+	help
+	  Always use the default kernel command string, even if the boot
+	  loader passes other arguments to the kernel.
+	  This is useful if you cannot or don't want to change the
+	  command-line options your boot loader passes to the kernel.
+
+config EFI_STUB
+	bool
+
+config EFI
+	bool "UEFI runtime support"
+	depends on OF && !CPU_BIG_ENDIAN
+	depends on KERNEL_MODE_NEON
+	select ARCH_SUPPORTS_ACPI
+	select LIBFDT
+	select UCS2_STRING
+	select EFI_PARAMS_FROM_FDT
+	select EFI_RUNTIME_WRAPPERS
+	select EFI_STUB
+	select EFI_GENERIC_STUB
+	default y
+	help
+	  This option provides support for runtime services provided
+	  by UEFI firmware (such as non-volatile variables, realtime
+          clock, and platform reset). A UEFI stub is also provided to
+	  allow the kernel to be booted as an EFI application. This
+	  is only useful on systems that have UEFI firmware.
+
+config DMI
+	bool "Enable support for SMBIOS (DMI) tables"
+	depends on EFI
+	default y
+	help
+	  This enables SMBIOS/DMI feature for systems.
+
+	  This option is only useful on systems that have UEFI firmware.
+	  However, even with this option, the resultant kernel should
+	  continue to boot on existing non-UEFI platforms.
+
+endmenu
+
+config SYSVIPC_COMPAT
+	def_bool y
+	depends on COMPAT && SYSVIPC
+
+config ARCH_ENABLE_HUGEPAGE_MIGRATION
+	def_bool y
+	depends on HUGETLB_PAGE && MIGRATION
+
+config ARCH_ENABLE_THP_MIGRATION
+	def_bool y
+	depends on TRANSPARENT_HUGEPAGE
+
+menu "Power management options"
+
+source "kernel/power/Kconfig"
+
+config ARCH_HIBERNATION_POSSIBLE
+	def_bool y
+	depends on CPU_PM
+
+config ARCH_HIBERNATION_HEADER
+	def_bool y
+	depends on HIBERNATION
+
+config ARCH_SUSPEND_POSSIBLE
+	def_bool y
+
+endmenu
+
+menu "CPU Power Management"
+
+source "drivers/cpuidle/Kconfig"
+
+source "drivers/cpufreq/Kconfig"
+
+endmenu
+
+source "drivers/firmware/Kconfig"
+
+source "drivers/acpi/Kconfig"
+
+source "arch/arm64/kvm/Kconfig"
+
+if CRYPTO
+source "arch/arm64/crypto/Kconfig"
+endif