Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 172 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
new file mode 100644
index 000000000..41d8b15f2
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for NXP LS1088A QDS Board.
+ *
+ * Copyright 2017 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
+ *
+ */
+
+/dts-v1/;
+
+#include "fsl-ls1088a.dtsi"
+
+/ {
+	model = "LS1088A QDS Board";
+	compatible = "fsl,ls1088a-qds", "fsl,ls1088a";
+};
+
+&dspi {
+	bus-num = <0>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-max-frequency = <3500000>;
+		reg = <1>;
+	};
+
+	flash@2 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-max-frequency = <3500000>;
+		reg = <2>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9547";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			ina220@40 {
+				compatible = "ti,ina220";
+				reg = <0x40>;
+				shunt-resistor = <1000>;
+			};
+
+			ina220@41 {
+				compatible = "ti,ina220";
+				reg = <0x41>;
+				shunt-resistor = <1000>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			temp-sensor@4c {
+				compatible = "adi,adt7461a";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "nxp,pcf2129";
+				reg = <0x51>;
+				/* IRQ10_B */
+				interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			eeprom@56 {
+				compatible = "atmel,24c512";
+				reg = <0x56>;
+			};
+
+			eeprom@57 {
+				compatible = "atmel,24c512";
+				reg = <0x57>;
+			};
+		};
+	};
+};
+
+&ifc {
+	ranges = <0 0 0x5 0x80000000 0x08000000
+		  2 0 0x5 0x30000000 0x00010000
+		  3 0 0x5 0x20000000 0x00010000>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+	};
+
+	nand@2,0 {
+		compatible = "fsl,ifc-nand";
+		reg = <0x2 0x0 0x10000>;
+	};
+
+	fpga: board-control@3,0 {
+		compatible = "fsl,ls1088aqds-fpga", "fsl,fpga-qixis";
+		reg = <0x3 0x0 0x0000100>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&duart1 {
+	status = "okay";
+};
+
+&esdhc {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
+&sata {
+	status = "okay";
+};