Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 576 insertions, 0 deletions

diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
new file mode 100644
index 000000000..211757e34
--- /dev/null
+++ b/arch/ia64/pci/pci.c
@@ -0,0 +1,576 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * pci.c - Low-Level PCI Access in IA-64
+ *
+ * Derived from bios32.c of i386 tree.
+ *
+ * (c) Copyright 2002, 2005 Hewlett-Packard Development Company, L.P.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ * Copyright (C) 2004 Silicon Graphics, Inc.
+ *
+ * Note: Above list of copyright holders is incomplete...
+ */
+
+#include <linux/acpi.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/memblock.h>
+#include <linux/export.h>
+
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/sal.h>
+#include <asm/smp.h>
+#include <asm/irq.h>
+#include <asm/hw_irq.h>
+
+/*
+ * Low-level SAL-based PCI configuration access functions. Note that SAL
+ * calls are already serialized (via sal_lock), so we don't need another
+ * synchronization mechanism here.
+ */
+
+#define PCI_SAL_ADDRESS(seg, bus, devfn, reg)		\
+	(((u64) seg << 24) | (bus << 16) | (devfn << 8) | (reg))
+
+/* SAL 3.2 adds support for extended config space. */
+
+#define PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg)	\
+	(((u64) seg << 28) | (bus << 20) | (devfn << 12) | (reg))
+
+int raw_pci_read(unsigned int seg, unsigned int bus, unsigned int devfn,
+	      int reg, int len, u32 *value)
+{
+	u64 addr, data = 0;
+	int mode, result;
+
+	if (!value || (seg > 65535) || (bus > 255) || (devfn > 255) || (reg > 4095))
+		return -EINVAL;
+
+	if ((seg | reg) <= 255) {
+		addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg);
+		mode = 0;
+	} else if (sal_revision >= SAL_VERSION_CODE(3,2)) {
+		addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg);
+		mode = 1;
+	} else {
+		return -EINVAL;
+	}
+
+	result = ia64_sal_pci_config_read(addr, mode, len, &data);
+	if (result != 0)
+		return -EINVAL;
+
+	*value = (u32) data;
+	return 0;
+}
+
+int raw_pci_write(unsigned int seg, unsigned int bus, unsigned int devfn,
+	       int reg, int len, u32 value)
+{
+	u64 addr;
+	int mode, result;
+
+	if ((seg > 65535) || (bus > 255) || (devfn > 255) || (reg > 4095))
+		return -EINVAL;
+
+	if ((seg | reg) <= 255) {
+		addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg);
+		mode = 0;
+	} else if (sal_revision >= SAL_VERSION_CODE(3,2)) {
+		addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg);
+		mode = 1;
+	} else {
+		return -EINVAL;
+	}
+	result = ia64_sal_pci_config_write(addr, mode, len, value);
+	if (result != 0)
+		return -EINVAL;
+	return 0;
+}
+
+static int pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+							int size, u32 *value)
+{
+	return raw_pci_read(pci_domain_nr(bus), bus->number,
+				 devfn, where, size, value);
+}
+
+static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+							int size, u32 value)
+{
+	return raw_pci_write(pci_domain_nr(bus), bus->number,
+				  devfn, where, size, value);
+}
+
+struct pci_ops pci_root_ops = {
+	.read = pci_read,
+	.write = pci_write,
+};
+
+struct pci_root_info {
+	struct acpi_pci_root_info common;
+	struct pci_controller controller;
+	struct list_head io_resources;
+};
+
+static unsigned int new_space(u64 phys_base, int sparse)
+{
+	u64 mmio_base;
+	int i;
+
+	if (phys_base == 0)
+		return 0;	/* legacy I/O port space */
+
+	mmio_base = (u64) ioremap(phys_base, 0);
+	for (i = 0; i < num_io_spaces; i++)
+		if (io_space[i].mmio_base == mmio_base &&
+		    io_space[i].sparse == sparse)
+			return i;
+
+	if (num_io_spaces == MAX_IO_SPACES) {
+		pr_err("PCI: Too many IO port spaces "
+			"(MAX_IO_SPACES=%lu)\n", MAX_IO_SPACES);
+		return ~0;
+	}
+
+	i = num_io_spaces++;
+	io_space[i].mmio_base = mmio_base;
+	io_space[i].sparse = sparse;
+
+	return i;
+}
+
+static int add_io_space(struct device *dev, struct pci_root_info *info,
+			struct resource_entry *entry)
+{
+	struct resource_entry *iospace;
+	struct resource *resource, *res = entry->res;
+	char *name;
+	unsigned long base, min, max, base_port;
+	unsigned int sparse = 0, space_nr, len;
+
+	len = strlen(info->common.name) + 32;
+	iospace = resource_list_create_entry(NULL, len);
+	if (!iospace) {
+		dev_err(dev, "PCI: No memory for %s I/O port space\n",
+			info->common.name);
+		return -ENOMEM;
+	}
+
+	if (res->flags & IORESOURCE_IO_SPARSE)
+		sparse = 1;
+	space_nr = new_space(entry->offset, sparse);
+	if (space_nr == ~0)
+		goto free_resource;
+
+	name = (char *)(iospace + 1);
+	min = res->start - entry->offset;
+	max = res->end - entry->offset;
+	base = __pa(io_space[space_nr].mmio_base);
+	base_port = IO_SPACE_BASE(space_nr);
+	snprintf(name, len, "%s I/O Ports %08lx-%08lx", info->common.name,
+		 base_port + min, base_port + max);
+
+	/*
+	 * The SDM guarantees the legacy 0-64K space is sparse, but if the
+	 * mapping is done by the processor (not the bridge), ACPI may not
+	 * mark it as sparse.
+	 */
+	if (space_nr == 0)
+		sparse = 1;
+
+	resource = iospace->res;
+	resource->name  = name;
+	resource->flags = IORESOURCE_MEM;
+	resource->start = base + (sparse ? IO_SPACE_SPARSE_ENCODING(min) : min);
+	resource->end   = base + (sparse ? IO_SPACE_SPARSE_ENCODING(max) : max);
+	if (insert_resource(&iomem_resource, resource)) {
+		dev_err(dev,
+			"can't allocate host bridge io space resource  %pR\n",
+			resource);
+		goto free_resource;
+	}
+
+	entry->offset = base_port;
+	res->start = min + base_port;
+	res->end = max + base_port;
+	resource_list_add_tail(iospace, &info->io_resources);
+
+	return 0;
+
+free_resource:
+	resource_list_free_entry(iospace);
+	return -ENOSPC;
+}
+
+/*
+ * An IO port or MMIO resource assigned to a PCI host bridge may be
+ * consumed by the host bridge itself or available to its child
+ * bus/devices. The ACPI specification defines a bit (Producer/Consumer)
+ * to tell whether the resource is consumed by the host bridge itself,
+ * but firmware hasn't used that bit consistently, so we can't rely on it.
+ *
+ * On x86 and IA64 platforms, all IO port and MMIO resources are assumed
+ * to be available to child bus/devices except one special case:
+ *     IO port [0xCF8-0xCFF] is consumed by the host bridge itself
+ *     to access PCI configuration space.
+ *
+ * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
+ */
+static bool resource_is_pcicfg_ioport(struct resource *res)
+{
+	return (res->flags & IORESOURCE_IO) &&
+		res->start == 0xCF8 && res->end == 0xCFF;
+}
+
+static int pci_acpi_root_prepare_resources(struct acpi_pci_root_info *ci)
+{
+	struct device *dev = &ci->bridge->dev;
+	struct pci_root_info *info;
+	struct resource *res;
+	struct resource_entry *entry, *tmp;
+	int status;
+
+	status = acpi_pci_probe_root_resources(ci);
+	if (status > 0) {
+		info = container_of(ci, struct pci_root_info, common);
+		resource_list_for_each_entry_safe(entry, tmp, &ci->resources) {
+			res = entry->res;
+			if (res->flags & IORESOURCE_MEM) {
+				/*
+				 * HP's firmware has a hack to work around a
+				 * Windows bug. Ignore these tiny memory ranges.
+				 */
+				if (resource_size(res) <= 16) {
+					resource_list_del(entry);
+					insert_resource(&iomem_resource,
+							entry->res);
+					resource_list_add_tail(entry,
+							&info->io_resources);
+				}
+			} else if (res->flags & IORESOURCE_IO) {
+				if (resource_is_pcicfg_ioport(entry->res))
+					resource_list_destroy_entry(entry);
+				else if (add_io_space(dev, info, entry))
+					resource_list_destroy_entry(entry);
+			}
+		}
+	}
+
+	return status;
+}
+
+static void pci_acpi_root_release_info(struct acpi_pci_root_info *ci)
+{
+	struct pci_root_info *info;
+	struct resource_entry *entry, *tmp;
+
+	info = container_of(ci, struct pci_root_info, common);
+	resource_list_for_each_entry_safe(entry, tmp, &info->io_resources) {
+		release_resource(entry->res);
+		resource_list_destroy_entry(entry);
+	}
+	kfree(info);
+}
+
+static struct acpi_pci_root_ops pci_acpi_root_ops = {
+	.pci_ops = &pci_root_ops,
+	.release_info = pci_acpi_root_release_info,
+	.prepare_resources = pci_acpi_root_prepare_resources,
+};
+
+struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
+{
+	struct acpi_device *device = root->device;
+	struct pci_root_info *info;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		dev_err(&device->dev,
+			"pci_bus %04x:%02x: ignored (out of memory)\n",
+			root->segment, (int)root->secondary.start);
+		return NULL;
+	}
+
+	info->controller.segment = root->segment;
+	info->controller.companion = device;
+	info->controller.node = acpi_get_node(device->handle);
+	INIT_LIST_HEAD(&info->io_resources);
+	return acpi_pci_root_create(root, &pci_acpi_root_ops,
+				    &info->common, &info->controller);
+}
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	/*
+	 * We pass NULL as parent to pci_create_root_bus(), so if it is not NULL
+	 * here, pci_create_root_bus() has been called by someone else and
+	 * sysdata is likely to be different from what we expect.  Let it go in
+	 * that case.
+	 */
+	if (!bridge->dev.parent) {
+		struct pci_controller *controller = bridge->bus->sysdata;
+		ACPI_COMPANION_SET(&bridge->dev, controller->companion);
+	}
+	return 0;
+}
+
+void pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+	int idx;
+
+	if (!dev->bus)
+		return;
+
+	for (idx = 0; idx < PCI_BRIDGE_RESOURCES; idx++) {
+		struct resource *r = &dev->resource[idx];
+
+		if (!r->flags || r->parent || !r->start)
+			continue;
+
+		pci_claim_resource(dev, idx);
+	}
+}
+EXPORT_SYMBOL_GPL(pcibios_fixup_device_resources);
+
+static void pcibios_fixup_bridge_resources(struct pci_dev *dev)
+{
+	int idx;
+
+	if (!dev->bus)
+		return;
+
+	for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) {
+		struct resource *r = &dev->resource[idx];
+
+		if (!r->flags || r->parent || !r->start)
+			continue;
+
+		pci_claim_bridge_resource(dev, idx);
+	}
+}
+
+/*
+ *  Called after each bus is probed, but before its children are examined.
+ */
+void pcibios_fixup_bus(struct pci_bus *b)
+{
+	struct pci_dev *dev;
+
+	if (b->self) {
+		pci_read_bridge_bases(b);
+		pcibios_fixup_bridge_resources(b->self);
+	}
+	list_for_each_entry(dev, &b->devices, bus_list)
+		pcibios_fixup_device_resources(dev);
+}
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+	acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+	acpi_pci_remove_bus(bus);
+}
+
+void pcibios_set_master (struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+int
+pcibios_enable_device (struct pci_dev *dev, int mask)
+{
+	int ret;
+
+	ret = pci_enable_resources(dev, mask);
+	if (ret < 0)
+		return ret;
+
+	if (!pci_dev_msi_enabled(dev))
+		return acpi_pci_irq_enable(dev);
+	return 0;
+}
+
+void
+pcibios_disable_device (struct pci_dev *dev)
+{
+	BUG_ON(atomic_read(&dev->enable_cnt));
+	if (!pci_dev_msi_enabled(dev))
+		acpi_pci_irq_disable(dev);
+}
+
+/**
+ * pci_get_legacy_mem - generic legacy mem routine
+ * @bus: bus to get legacy memory base address for
+ *
+ * Find the base of legacy memory for @bus.  This is typically the first
+ * megabyte of bus address space for @bus or is simply 0 on platforms whose
+ * chipsets support legacy I/O and memory routing.  Returns the base address
+ * or an error pointer if an error occurred.
+ *
+ * This is the ia64 generic version of this routine.  Other platforms
+ * are free to override it with a machine vector.
+ */
+char *pci_get_legacy_mem(struct pci_bus *bus)
+{
+	return (char *)__IA64_UNCACHED_OFFSET;
+}
+
+/**
+ * pci_mmap_legacy_page_range - map legacy memory space to userland
+ * @bus: bus whose legacy space we're mapping
+ * @vma: vma passed in by mmap
+ *
+ * Map legacy memory space for this device back to userspace using a machine
+ * vector to get the base address.
+ */
+int
+pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
+			   enum pci_mmap_state mmap_state)
+{
+	unsigned long size = vma->vm_end - vma->vm_start;
+	pgprot_t prot;
+	char *addr;
+
+	/* We only support mmap'ing of legacy memory space */
+	if (mmap_state != pci_mmap_mem)
+		return -ENOSYS;
+
+	/*
+	 * Avoid attribute aliasing.  See Documentation/ia64/aliasing.rst
+	 * for more details.
+	 */
+	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
+		return -EINVAL;
+	prot = phys_mem_access_prot(NULL, vma->vm_pgoff, size,
+				    vma->vm_page_prot);
+
+	addr = pci_get_legacy_mem(bus);
+	if (IS_ERR(addr))
+		return PTR_ERR(addr);
+
+	vma->vm_pgoff += (unsigned long)addr >> PAGE_SHIFT;
+	vma->vm_page_prot = prot;
+
+	if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+			    size, vma->vm_page_prot))
+		return -EAGAIN;
+
+	return 0;
+}
+
+/**
+ * pci_legacy_read - read from legacy I/O space
+ * @bus: bus to read
+ * @port: legacy port value
+ * @val: caller allocated storage for returned value
+ * @size: number of bytes to read
+ *
+ * Simply reads @size bytes from @port and puts the result in @val.
+ *
+ * Again, this (and the write routine) are generic versions that can be
+ * overridden by the platform.  This is necessary on platforms that don't
+ * support legacy I/O routing or that hard fail on legacy I/O timeouts.
+ */
+int pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
+{
+	int ret = size;
+
+	switch (size) {
+	case 1:
+		*val = inb(port);
+		break;
+	case 2:
+		*val = inw(port);
+		break;
+	case 4:
+		*val = inl(port);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+/**
+ * pci_legacy_write - perform a legacy I/O write
+ * @bus: bus pointer
+ * @port: port to write
+ * @val: value to write
+ * @size: number of bytes to write from @val
+ *
+ * Simply writes @size bytes of @val to @port.
+ */
+int pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
+{
+	int ret = size;
+
+	switch (size) {
+	case 1:
+		outb(val, port);
+		break;
+	case 2:
+		outw(val, port);
+		break;
+	case 4:
+		outl(val, port);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+/**
+ * set_pci_cacheline_size - determine cacheline size for PCI devices
+ *
+ * We want to use the line-size of the outer-most cache.  We assume
+ * that this line-size is the same for all CPUs.
+ *
+ * Code mostly taken from arch/ia64/kernel/palinfo.c:cache_info().
+ */
+static void __init set_pci_dfl_cacheline_size(void)
+{
+	unsigned long levels, unique_caches;
+	long status;
+	pal_cache_config_info_t cci;
+
+	status = ia64_pal_cache_summary(&levels, &unique_caches);
+	if (status != 0) {
+		pr_err("%s: ia64_pal_cache_summary() failed "
+			"(status=%ld)\n", __func__, status);
+		return;
+	}
+
+	status = ia64_pal_cache_config_info(levels - 1,
+				/* cache_type (data_or_unified)= */ 2, &cci);
+	if (status != 0) {
+		pr_err("%s: ia64_pal_cache_config_info() failed "
+			"(status=%ld)\n", __func__, status);
+		return;
+	}
+	pci_dfl_cache_line_size = (1 << cci.pcci_line_size) / 4;
+}
+
+static int __init pcibios_init(void)
+{
+	set_pci_dfl_cacheline_size();
+	return 0;
+}
+
+subsys_initcall(pcibios_init);