Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 271 insertions, 0 deletions

diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
new file mode 100644
index 000000000..e3575388c
--- /dev/null
+++ b/arch/m68k/mac/macints.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *	Macintosh interrupts
+ *
+ * General design:
+ * In contrary to the Amiga and Atari platforms, the Mac hardware seems to
+ * exclusively use the autovector interrupts (the 'generic level0-level7'
+ * interrupts with exception vectors 0x19-0x1f). The following interrupt levels
+ * are used:
+ *	1	- VIA1
+ *		  - slot 0: one second interrupt (CA2)
+ *		  - slot 1: VBlank (CA1)
+ *		  - slot 2: ADB data ready (SR full)
+ *		  - slot 3: ADB data  (CB2)
+ *		  - slot 4: ADB clock (CB1)
+ *		  - slot 5: timer 2
+ *		  - slot 6: timer 1
+ *		  - slot 7: status of IRQ; signals 'any enabled int.'
+ *
+ *	2	- VIA2 or RBV
+ *		  - slot 0: SCSI DRQ (CA2)
+ *		  - slot 1: NUBUS IRQ (CA1) need to read port A to find which
+ *		  - slot 2: /EXP IRQ (only on IIci)
+ *		  - slot 3: SCSI IRQ (CB2)
+ *		  - slot 4: ASC IRQ (CB1)
+ *		  - slot 5: timer 2 (not on IIci)
+ *		  - slot 6: timer 1 (not on IIci)
+ *		  - slot 7: status of IRQ; signals 'any enabled int.'
+ *
+ * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
+ *
+ *	3	- unused (?)
+ *
+ *	4	- SCC
+ *
+ *	5	- unused (?)
+ *		  [serial errors or special conditions seem to raise level 6
+ *		  interrupts on some models (LC4xx?)]
+ *
+ *	6	- off switch (?)
+ *
+ * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support
+ * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and
+ * sound out to their own autovector IRQs and gives VIA1 a higher priority:
+ *
+ *	1	- unused (?)
+ *
+ *	3	- on-board SONIC
+ *
+ *	5	- Apple Sound Chip (ASC)
+ *
+ *	6	- VIA1
+ *
+ * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to
+ * the Quadra (A/UX) mapping:
+ *
+ *	1	- ISM IOP (ADB)
+ *
+ *	2	- SCSI
+ *
+ *	3	- NuBus
+ *
+ *	4	- SCC IOP
+ *
+ *	6	- VIA1
+ *
+ * For PSC Macintoshes (660AV, 840AV):
+ *
+ *	3	- PSC level 3
+ *		  - slot 0: MACE
+ *
+ *	4	- PSC level 4
+ *		  - slot 1: SCC channel A interrupt
+ *		  - slot 2: SCC channel B interrupt
+ *		  - slot 3: MACE DMA
+ *
+ *	5	- PSC level 5
+ *
+ *	6	- PSC level 6
+ *
+ * Finally we have good 'ole level 7, the non-maskable interrupt:
+ *
+ *	7	- NMI (programmer's switch on the back of some Macs)
+ *		  Also RAM parity error on models which support it (IIc, IIfx?)
+ *
+ * The current interrupt logic looks something like this:
+ *
+ * - We install dispatchers for the autovector interrupts (1-7). These
+ *   dispatchers are responsible for querying the hardware (the
+ *   VIA/RBV/OSS/PSC chips) to determine the actual interrupt source. Using
+ *   this information a machspec interrupt number is generated by placing the
+ *   index of the interrupt hardware into the low three bits and the original
+ *   autovector interrupt number in the upper 5 bits. The handlers for the
+ *   resulting machspec interrupt are then called.
+ *
+ * - Nubus is a special case because its interrupts are hidden behind two
+ *   layers of hardware. Nubus interrupts come in as index 1 on VIA #2,
+ *   which translates to IRQ number 17. In this spot we install _another_
+ *   dispatcher. This dispatcher finds the interrupting slot number (9-F) and
+ *   then forms a new machspec interrupt number as above with the slot number
+ *   minus 9 in the low three bits and the pseudo-level 7 in the upper five
+ *   bits.  The handlers for this new machspec interrupt number are then
+ *   called. This puts Nubus interrupts into the range 56-62.
+ *
+ * - The Baboon interrupts (used on some PowerBooks) are an even more special
+ *   case. They're hidden behind the Nubus slot $C interrupt thus adding a
+ *   third layer of indirection. Why oh why did the Apple engineers do that?
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/debug.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+
+#include <asm/irq.h>
+#include <asm/macintosh.h>
+#include <asm/macints.h>
+#include <asm/mac_via.h>
+#include <asm/mac_psc.h>
+#include <asm/mac_oss.h>
+#include <asm/mac_iop.h>
+#include <asm/mac_baboon.h>
+#include <asm/hwtest.h>
+#include <asm/irq_regs.h>
+
+extern void show_registers(struct pt_regs *);
+
+irqreturn_t mac_nmi_handler(int, void *);
+
+static unsigned int mac_irq_startup(struct irq_data *);
+static void mac_irq_shutdown(struct irq_data *);
+
+static struct irq_chip mac_irq_chip = {
+	.name		= "mac",
+	.irq_enable	= mac_irq_enable,
+	.irq_disable	= mac_irq_disable,
+	.irq_startup	= mac_irq_startup,
+	.irq_shutdown	= mac_irq_shutdown,
+};
+
+void __init mac_init_IRQ(void)
+{
+	m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
+				  NUM_MAC_SOURCES - IRQ_USER);
+
+	/*
+	 * Now register the handlers for the master IRQ handlers
+	 * at levels 1-7. Most of the work is done elsewhere.
+	 */
+
+	if (oss_present)
+		oss_register_interrupts();
+	else
+		via_register_interrupts();
+	if (psc)
+		psc_register_interrupts();
+	if (baboon_present)
+		baboon_register_interrupts();
+	iop_register_interrupts();
+	if (request_irq(IRQ_AUTO_7, mac_nmi_handler, 0, "NMI",
+			mac_nmi_handler))
+		pr_err("Couldn't register NMI\n");
+}
+
+/*
+ *  mac_irq_enable - enable an interrupt source
+ * mac_irq_disable - disable an interrupt source
+ *
+ * These routines are just dispatchers to the VIA/OSS/PSC routines.
+ */
+
+void mac_irq_enable(struct irq_data *data)
+{
+	int irq = data->irq;
+	int irq_src = IRQ_SRC(irq);
+
+	switch(irq_src) {
+	case 1:
+	case 2:
+	case 7:
+		if (oss_present)
+			oss_irq_enable(irq);
+		else
+			via_irq_enable(irq);
+		break;
+	case 3:
+	case 4:
+	case 5:
+	case 6:
+		if (psc)
+			psc_irq_enable(irq);
+		else if (oss_present)
+			oss_irq_enable(irq);
+		break;
+	case 8:
+		if (baboon_present)
+			baboon_irq_enable(irq);
+		break;
+	}
+}
+
+void mac_irq_disable(struct irq_data *data)
+{
+	int irq = data->irq;
+	int irq_src = IRQ_SRC(irq);
+
+	switch(irq_src) {
+	case 1:
+	case 2:
+	case 7:
+		if (oss_present)
+			oss_irq_disable(irq);
+		else
+			via_irq_disable(irq);
+		break;
+	case 3:
+	case 4:
+	case 5:
+	case 6:
+		if (psc)
+			psc_irq_disable(irq);
+		else if (oss_present)
+			oss_irq_disable(irq);
+		break;
+	case 8:
+		if (baboon_present)
+			baboon_irq_disable(irq);
+		break;
+	}
+}
+
+static unsigned int mac_irq_startup(struct irq_data *data)
+{
+	int irq = data->irq;
+
+	if (IRQ_SRC(irq) == 7 && !oss_present)
+		via_nubus_irq_startup(irq);
+	else
+		mac_irq_enable(data);
+
+	return 0;
+}
+
+static void mac_irq_shutdown(struct irq_data *data)
+{
+	int irq = data->irq;
+
+	if (IRQ_SRC(irq) == 7 && !oss_present)
+		via_nubus_irq_shutdown(irq);
+	else
+		mac_irq_disable(data);
+}
+
+static volatile int in_nmi;
+
+irqreturn_t mac_nmi_handler(int irq, void *dev_id)
+{
+	if (in_nmi)
+		return IRQ_HANDLED;
+	in_nmi = 1;
+
+	pr_info("Non-Maskable Interrupt\n");
+	show_registers(get_irq_regs());
+
+	in_nmi = 0;
+	return IRQ_HANDLED;
+}