Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

7 files changed, 1086 insertions, 0 deletions

diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
new file mode 100644
index 000000000..06838f80a
--- /dev/null
+++ b/arch/mips/jazz/Kconfig
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+config ACER_PICA_61
+	bool "Support for Acer PICA 1 chipset"
+	depends on MACH_JAZZ
+	select DMA_NONCOHERENT
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
+
+config MIPS_MAGNUM_4000
+	bool "Support for MIPS Magnum 4000"
+	depends on MACH_JAZZ
+	select DMA_NONCOHERENT
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
+
+config OLIVETTI_M700
+	bool "Support for Olivetti M700-10"
+	depends on MACH_JAZZ
+	select DMA_NONCOHERENT
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	help
+	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
+	  kernel that runs on these, say Y here. For details about Linux on
+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
+	  <http://www.linux-mips.org/>.
diff --git a/arch/mips/jazz/Makefile b/arch/mips/jazz/Makefile
new file mode 100644
index 000000000..5815e1cb3
--- /dev/null
+++ b/arch/mips/jazz/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for the Jazz family specific parts of the kernel
+#
+
+obj-y		:= irq.o jazzdma.o reset.o setup.o
diff --git a/arch/mips/jazz/Platform b/arch/mips/jazz/Platform
new file mode 100644
index 000000000..eb0490ae8
--- /dev/null
+++ b/arch/mips/jazz/Platform
@@ -0,0 +1,5 @@
+#
+# Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
+#
+cflags-$(CONFIG_MACH_JAZZ)	+= -I$(srctree)/arch/mips/include/asm/mach-jazz
+load-$(CONFIG_MACH_JAZZ)	+= 0xffffffff80080000
diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c
new file mode 100644
index 000000000..495ba7cc5
--- /dev/null
+++ b/arch/mips/jazz/irq.c
@@ -0,0 +1,149 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 Linus Torvalds
+ * Copyright (C) 1994 - 2001, 2003, 07 Ralf Baechle
+ */
+#include <linux/clockchips.h>
+#include <linux/i8253.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/irq.h>
+#include <linux/pgtable.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+#include <asm/io.h>
+#include <asm/jazz.h>
+#include <asm/tlbmisc.h>
+
+static DEFINE_RAW_SPINLOCK(r4030_lock);
+
+static void enable_r4030_irq(struct irq_data *d)
+{
+	unsigned int mask = 1 << (d->irq - JAZZ_IRQ_START);
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&r4030_lock, flags);
+	mask |= r4030_read_reg16(JAZZ_IO_IRQ_ENABLE);
+	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, mask);
+	raw_spin_unlock_irqrestore(&r4030_lock, flags);
+}
+
+void disable_r4030_irq(struct irq_data *d)
+{
+	unsigned int mask = ~(1 << (d->irq - JAZZ_IRQ_START));
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&r4030_lock, flags);
+	mask &= r4030_read_reg16(JAZZ_IO_IRQ_ENABLE);
+	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, mask);
+	raw_spin_unlock_irqrestore(&r4030_lock, flags);
+}
+
+static struct irq_chip r4030_irq_type = {
+	.name = "R4030",
+	.irq_mask = disable_r4030_irq,
+	.irq_unmask = enable_r4030_irq,
+};
+
+void __init init_r4030_ints(void)
+{
+	int i;
+
+	for (i = JAZZ_IRQ_START; i <= JAZZ_IRQ_END; i++)
+		irq_set_chip_and_handler(i, &r4030_irq_type, handle_level_irq);
+
+	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, 0);
+	r4030_read_reg16(JAZZ_IO_IRQ_SOURCE);		/* clear pending IRQs */
+	r4030_read_reg32(JAZZ_R4030_INVAL_ADDR);	/* clear error bits */
+}
+
+/*
+ * On systems with i8259-style interrupt controllers we assume for
+ * driver compatibility reasons interrupts 0 - 15 to be the i8259
+ * interrupts even if the hardware uses a different interrupt numbering.
+ */
+void __init arch_init_irq(void)
+{
+	/*
+	 * this is a hack to get back the still needed wired mapping
+	 * killed by init_mm()
+	 */
+
+	/* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
+	add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K);
+	/* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
+	add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M);
+	/* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
+	add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M);
+
+	init_i8259_irqs();			/* Integrated i8259  */
+	mips_cpu_irq_init();
+	init_r4030_ints();
+
+	change_c0_status(ST0_IM, IE_IRQ2 | IE_IRQ1);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+	unsigned int irq;
+
+	if (pending & IE_IRQ4) {
+		r4030_read_reg32(JAZZ_TIMER_REGISTER);
+		do_IRQ(JAZZ_TIMER_IRQ);
+	} else if (pending & IE_IRQ2) {
+		irq = *(volatile u8 *)JAZZ_EISA_IRQ_ACK;
+		do_IRQ(irq);
+	} else if (pending & IE_IRQ1) {
+		irq = *(volatile u8 *)JAZZ_IO_IRQ_SOURCE >> 2;
+		if (likely(irq > 0))
+			do_IRQ(irq + JAZZ_IRQ_START - 1);
+		else
+			panic("Unimplemented loc_no_irq handler");
+	}
+}
+
+struct clock_event_device r4030_clockevent = {
+	.name		= "r4030",
+	.features	= CLOCK_EVT_FEAT_PERIODIC,
+	.rating		= 300,
+	.irq		= JAZZ_TIMER_IRQ,
+};
+
+static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *cd = dev_id;
+
+	cd->event_handler(cd);
+	return IRQ_HANDLED;
+}
+
+void __init plat_time_init(void)
+{
+	struct clock_event_device *cd = &r4030_clockevent;
+	unsigned int cpu = smp_processor_id();
+
+	BUG_ON(HZ != 100);
+
+	cd->cpumask		= cpumask_of(cpu);
+	clockevents_register_device(cd);
+	if (request_irq(JAZZ_TIMER_IRQ, r4030_timer_interrupt, IRQF_TIMER,
+			"R4030 timer", cd))
+		pr_err("Failed to register R4030 timer interrupt\n");
+
+	/*
+	 * Set clock to 100Hz.
+	 *
+	 * The R4030 timer receives an input clock of 1kHz which is divieded by
+	 * a programmable 4-bit divider.  This makes it fairly inflexible.
+	 */
+	r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9);
+	setup_pit_timer();
+}
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
new file mode 100644
index 000000000..461457b28
--- /dev/null
+++ b/arch/mips/jazz/jazzdma.c
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mips Jazz DMA controller support
+ * Copyright (C) 1995, 1996 by Andreas Busse
+ *
+ * NOTE: Some of the argument checking could be removed when
+ * things have settled down. Also, instead of returning 0xffffffff
+ * on failure of vdma_alloc() one could leave page #0 unused
+ * and return the more usual NULL pointer as logical address.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/memblock.h>
+#include <linux/spinlock.h>
+#include <linux/gfp.h>
+#include <linux/dma-map-ops.h>
+#include <asm/mipsregs.h>
+#include <asm/jazz.h>
+#include <asm/io.h>
+#include <linux/uaccess.h>
+#include <asm/dma.h>
+#include <asm/jazzdma.h>
+
+/*
+ * Set this to one to enable additional vdma debug code.
+ */
+#define CONF_DEBUG_VDMA 0
+
+static VDMA_PGTBL_ENTRY *pgtbl;
+
+static DEFINE_SPINLOCK(vdma_lock);
+
+/*
+ * Debug stuff
+ */
+#define vdma_debug     ((CONF_DEBUG_VDMA) ? debuglvl : 0)
+
+static int debuglvl = 3;
+
+/*
+ * Initialize the pagetable with a one-to-one mapping of
+ * the first 16 Mbytes of main memory and declare all
+ * entries to be unused. Using this method will at least
+ * allow some early device driver operations to work.
+ */
+static inline void vdma_pgtbl_init(void)
+{
+	unsigned long paddr = 0;
+	int i;
+
+	for (i = 0; i < VDMA_PGTBL_ENTRIES; i++) {
+		pgtbl[i].frame = paddr;
+		pgtbl[i].owner = VDMA_PAGE_EMPTY;
+		paddr += VDMA_PAGESIZE;
+	}
+}
+
+/*
+ * Initialize the Jazz R4030 dma controller
+ */
+static int __init vdma_init(void)
+{
+	/*
+	 * Allocate 32k of memory for DMA page tables.	This needs to be page
+	 * aligned and should be uncached to avoid cache flushing after every
+	 * update.
+	 */
+	pgtbl = (VDMA_PGTBL_ENTRY *)__get_free_pages(GFP_KERNEL | GFP_DMA,
+						    get_order(VDMA_PGTBL_SIZE));
+	BUG_ON(!pgtbl);
+	dma_cache_wback_inv((unsigned long)pgtbl, VDMA_PGTBL_SIZE);
+	pgtbl = (VDMA_PGTBL_ENTRY *)CKSEG1ADDR((unsigned long)pgtbl);
+
+	/*
+	 * Clear the R4030 translation table
+	 */
+	vdma_pgtbl_init();
+
+	r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE,
+			  CPHYSADDR((unsigned long)pgtbl));
+	r4030_write_reg32(JAZZ_R4030_TRSTBL_LIM, VDMA_PGTBL_SIZE);
+	r4030_write_reg32(JAZZ_R4030_TRSTBL_INV, 0);
+
+	printk(KERN_INFO "VDMA: R4030 DMA pagetables initialized.\n");
+	return 0;
+}
+arch_initcall(vdma_init);
+
+/*
+ * Allocate DMA pagetables using a simple first-fit algorithm
+ */
+unsigned long vdma_alloc(unsigned long paddr, unsigned long size)
+{
+	int first, last, pages, frame, i;
+	unsigned long laddr, flags;
+
+	/* check arguments */
+
+	if (paddr > 0x1fffffff) {
+		if (vdma_debug)
+			printk("vdma_alloc: Invalid physical address: %08lx\n",
+			       paddr);
+		return DMA_MAPPING_ERROR;	/* invalid physical address */
+	}
+	if (size > 0x400000 || size == 0) {
+		if (vdma_debug)
+			printk("vdma_alloc: Invalid size: %08lx\n", size);
+		return DMA_MAPPING_ERROR;	/* invalid physical address */
+	}
+
+	spin_lock_irqsave(&vdma_lock, flags);
+	/*
+	 * Find free chunk
+	 */
+	pages = VDMA_PAGE(paddr + size) - VDMA_PAGE(paddr) + 1;
+	first = 0;
+	while (1) {
+		while (pgtbl[first].owner != VDMA_PAGE_EMPTY &&
+		       first < VDMA_PGTBL_ENTRIES) first++;
+		if (first + pages > VDMA_PGTBL_ENTRIES) {	/* nothing free */
+			spin_unlock_irqrestore(&vdma_lock, flags);
+			return DMA_MAPPING_ERROR;
+		}
+
+		last = first + 1;
+		while (pgtbl[last].owner == VDMA_PAGE_EMPTY
+		       && last - first < pages)
+			last++;
+
+		if (last - first == pages)
+			break;	/* found */
+		first = last + 1;
+	}
+
+	/*
+	 * Mark pages as allocated
+	 */
+	laddr = (first << 12) + (paddr & (VDMA_PAGESIZE - 1));
+	frame = paddr & ~(VDMA_PAGESIZE - 1);
+
+	for (i = first; i < last; i++) {
+		pgtbl[i].frame = frame;
+		pgtbl[i].owner = laddr;
+		frame += VDMA_PAGESIZE;
+	}
+
+	/*
+	 * Update translation table and return logical start address
+	 */
+	r4030_write_reg32(JAZZ_R4030_TRSTBL_INV, 0);
+
+	if (vdma_debug > 1)
+		printk("vdma_alloc: Allocated %d pages starting from %08lx\n",
+		     pages, laddr);
+
+	if (vdma_debug > 2) {
+		printk("LADDR: ");
+		for (i = first; i < last; i++)
+			printk("%08x ", i << 12);
+		printk("\nPADDR: ");
+		for (i = first; i < last; i++)
+			printk("%08x ", pgtbl[i].frame);
+		printk("\nOWNER: ");
+		for (i = first; i < last; i++)
+			printk("%08x ", pgtbl[i].owner);
+		printk("\n");
+	}
+
+	spin_unlock_irqrestore(&vdma_lock, flags);
+
+	return laddr;
+}
+
+EXPORT_SYMBOL(vdma_alloc);
+
+/*
+ * Free previously allocated dma translation pages
+ * Note that this does NOT change the translation table,
+ * it just marks the free'd pages as unused!
+ */
+int vdma_free(unsigned long laddr)
+{
+	int i;
+
+	i = laddr >> 12;
+
+	if (pgtbl[i].owner != laddr) {
+		printk
+		    ("vdma_free: trying to free other's dma pages, laddr=%8lx\n",
+		     laddr);
+		return -1;
+	}
+
+	while (i < VDMA_PGTBL_ENTRIES && pgtbl[i].owner == laddr) {
+		pgtbl[i].owner = VDMA_PAGE_EMPTY;
+		i++;
+	}
+
+	if (vdma_debug > 1)
+		printk("vdma_free: freed %ld pages starting from %08lx\n",
+		       i - (laddr >> 12), laddr);
+
+	return 0;
+}
+
+EXPORT_SYMBOL(vdma_free);
+
+/*
+ * Translate a physical address to a logical address.
+ * This will return the logical address of the first
+ * match.
+ */
+unsigned long vdma_phys2log(unsigned long paddr)
+{
+	int i;
+	int frame;
+
+	frame = paddr & ~(VDMA_PAGESIZE - 1);
+
+	for (i = 0; i < VDMA_PGTBL_ENTRIES; i++) {
+		if (pgtbl[i].frame == frame)
+			break;
+	}
+
+	if (i == VDMA_PGTBL_ENTRIES)
+		return ~0UL;
+
+	return (i << 12) + (paddr & (VDMA_PAGESIZE - 1));
+}
+
+EXPORT_SYMBOL(vdma_phys2log);
+
+/*
+ * Translate a logical DMA address to a physical address
+ */
+unsigned long vdma_log2phys(unsigned long laddr)
+{
+	return pgtbl[laddr >> 12].frame + (laddr & (VDMA_PAGESIZE - 1));
+}
+
+EXPORT_SYMBOL(vdma_log2phys);
+
+/*
+ * Print DMA statistics
+ */
+void vdma_stats(void)
+{
+	int i;
+
+	printk("vdma_stats: CONFIG: %08x\n",
+	       r4030_read_reg32(JAZZ_R4030_CONFIG));
+	printk("R4030 translation table base: %08x\n",
+	       r4030_read_reg32(JAZZ_R4030_TRSTBL_BASE));
+	printk("R4030 translation table limit: %08x\n",
+	       r4030_read_reg32(JAZZ_R4030_TRSTBL_LIM));
+	printk("vdma_stats: INV_ADDR: %08x\n",
+	       r4030_read_reg32(JAZZ_R4030_INV_ADDR));
+	printk("vdma_stats: R_FAIL_ADDR: %08x\n",
+	       r4030_read_reg32(JAZZ_R4030_R_FAIL_ADDR));
+	printk("vdma_stats: M_FAIL_ADDR: %08x\n",
+	       r4030_read_reg32(JAZZ_R4030_M_FAIL_ADDR));
+	printk("vdma_stats: IRQ_SOURCE: %08x\n",
+	       r4030_read_reg32(JAZZ_R4030_IRQ_SOURCE));
+	printk("vdma_stats: I386_ERROR: %08x\n",
+	       r4030_read_reg32(JAZZ_R4030_I386_ERROR));
+	printk("vdma_chnl_modes:   ");
+	for (i = 0; i < 8; i++)
+		printk("%04x ",
+		       (unsigned) r4030_read_reg32(JAZZ_R4030_CHNL_MODE +
+						   (i << 5)));
+	printk("\n");
+	printk("vdma_chnl_enables: ");
+	for (i = 0; i < 8; i++)
+		printk("%04x ",
+		       (unsigned) r4030_read_reg32(JAZZ_R4030_CHNL_ENABLE +
+						   (i << 5)));
+	printk("\n");
+}
+
+/*
+ * DMA transfer functions
+ */
+
+/*
+ * Enable a DMA channel. Also clear any error conditions.
+ */
+void vdma_enable(int channel)
+{
+	int status;
+
+	if (vdma_debug)
+		printk("vdma_enable: channel %d\n", channel);
+
+	/*
+	 * Check error conditions first
+	 */
+	status = r4030_read_reg32(JAZZ_R4030_CHNL_ENABLE + (channel << 5));
+	if (status & 0x400)
+		printk("VDMA: Channel %d: Address error!\n", channel);
+	if (status & 0x200)
+		printk("VDMA: Channel %d: Memory error!\n", channel);
+
+	/*
+	 * Clear all interrupt flags
+	 */
+	r4030_write_reg32(JAZZ_R4030_CHNL_ENABLE + (channel << 5),
+			  r4030_read_reg32(JAZZ_R4030_CHNL_ENABLE +
+					   (channel << 5)) | R4030_TC_INTR
+			  | R4030_MEM_INTR | R4030_ADDR_INTR);
+
+	/*
+	 * Enable the desired channel
+	 */
+	r4030_write_reg32(JAZZ_R4030_CHNL_ENABLE + (channel << 5),
+			  r4030_read_reg32(JAZZ_R4030_CHNL_ENABLE +
+					   (channel << 5)) |
+			  R4030_CHNL_ENABLE);
+}
+
+EXPORT_SYMBOL(vdma_enable);
+
+/*
+ * Disable a DMA channel
+ */
+void vdma_disable(int channel)
+{
+	if (vdma_debug) {
+		int status =
+		    r4030_read_reg32(JAZZ_R4030_CHNL_ENABLE +
+				     (channel << 5));
+
+		printk("vdma_disable: channel %d\n", channel);
+		printk("VDMA: channel %d status: %04x (%s) mode: "
+		       "%02x addr: %06x count: %06x\n",
+		       channel, status,
+		       ((status & 0x600) ? "ERROR" : "OK"),
+		       (unsigned) r4030_read_reg32(JAZZ_R4030_CHNL_MODE +
+						   (channel << 5)),
+		       (unsigned) r4030_read_reg32(JAZZ_R4030_CHNL_ADDR +
+						   (channel << 5)),
+		       (unsigned) r4030_read_reg32(JAZZ_R4030_CHNL_COUNT +
+						   (channel << 5)));
+	}
+
+	r4030_write_reg32(JAZZ_R4030_CHNL_ENABLE + (channel << 5),
+			  r4030_read_reg32(JAZZ_R4030_CHNL_ENABLE +
+					   (channel << 5)) &
+			  ~R4030_CHNL_ENABLE);
+
+	/*
+	 * After disabling a DMA channel a remote bus register should be
+	 * read to ensure that the current DMA acknowledge cycle is completed.
+	 */
+	*((volatile unsigned int *) JAZZ_DUMMY_DEVICE);
+}
+
+EXPORT_SYMBOL(vdma_disable);
+
+/*
+ * Set DMA mode. This function accepts the mode values used
+ * to set a PC-style DMA controller. For the SCSI and FDC
+ * channels, we also set the default modes each time we're
+ * called.
+ * NOTE: The FAST and BURST dma modes are supported by the
+ * R4030 Rev. 2 and PICA chipsets only. I leave them disabled
+ * for now.
+ */
+void vdma_set_mode(int channel, int mode)
+{
+	if (vdma_debug)
+		printk("vdma_set_mode: channel %d, mode 0x%x\n", channel,
+		       mode);
+
+	switch (channel) {
+	case JAZZ_SCSI_DMA:	/* scsi */
+		r4030_write_reg32(JAZZ_R4030_CHNL_MODE + (channel << 5),
+/*			  R4030_MODE_FAST | */
+/*			  R4030_MODE_BURST | */
+				  R4030_MODE_INTR_EN |
+				  R4030_MODE_WIDTH_16 |
+				  R4030_MODE_ATIME_80);
+		break;
+
+	case JAZZ_FLOPPY_DMA:	/* floppy */
+		r4030_write_reg32(JAZZ_R4030_CHNL_MODE + (channel << 5),
+/*			  R4030_MODE_FAST | */
+/*			  R4030_MODE_BURST | */
+				  R4030_MODE_INTR_EN |
+				  R4030_MODE_WIDTH_8 |
+				  R4030_MODE_ATIME_120);
+		break;
+
+	case JAZZ_AUDIOL_DMA:
+	case JAZZ_AUDIOR_DMA:
+		printk("VDMA: Audio DMA not supported yet.\n");
+		break;
+
+	default:
+		printk
+		    ("VDMA: vdma_set_mode() called with unsupported channel %d!\n",
+		     channel);
+	}
+
+	switch (mode) {
+	case DMA_MODE_READ:
+		r4030_write_reg32(JAZZ_R4030_CHNL_ENABLE + (channel << 5),
+				  r4030_read_reg32(JAZZ_R4030_CHNL_ENABLE +
+						   (channel << 5)) &
+				  ~R4030_CHNL_WRITE);
+		break;
+
+	case DMA_MODE_WRITE:
+		r4030_write_reg32(JAZZ_R4030_CHNL_ENABLE + (channel << 5),
+				  r4030_read_reg32(JAZZ_R4030_CHNL_ENABLE +
+						   (channel << 5)) |
+				  R4030_CHNL_WRITE);
+		break;
+
+	default:
+		printk
+		    ("VDMA: vdma_set_mode() called with unknown dma mode 0x%x\n",
+		     mode);
+	}
+}
+
+EXPORT_SYMBOL(vdma_set_mode);
+
+/*
+ * Set Transfer Address
+ */
+void vdma_set_addr(int channel, long addr)
+{
+	if (vdma_debug)
+		printk("vdma_set_addr: channel %d, addr %lx\n", channel,
+		       addr);
+
+	r4030_write_reg32(JAZZ_R4030_CHNL_ADDR + (channel << 5), addr);
+}
+
+EXPORT_SYMBOL(vdma_set_addr);
+
+/*
+ * Set Transfer Count
+ */
+void vdma_set_count(int channel, int count)
+{
+	if (vdma_debug)
+		printk("vdma_set_count: channel %d, count %08x\n", channel,
+		       (unsigned) count);
+
+	r4030_write_reg32(JAZZ_R4030_CHNL_COUNT + (channel << 5), count);
+}
+
+EXPORT_SYMBOL(vdma_set_count);
+
+/*
+ * Get Residual
+ */
+int vdma_get_residue(int channel)
+{
+	int residual;
+
+	residual = r4030_read_reg32(JAZZ_R4030_CHNL_COUNT + (channel << 5));
+
+	if (vdma_debug)
+		printk("vdma_get_residual: channel %d: residual=%d\n",
+		       channel, residual);
+
+	return residual;
+}
+
+/*
+ * Get DMA channel enable register
+ */
+int vdma_get_enable(int channel)
+{
+	int enable;
+
+	enable = r4030_read_reg32(JAZZ_R4030_CHNL_ENABLE + (channel << 5));
+
+	if (vdma_debug)
+		printk("vdma_get_enable: channel %d: enable=%d\n", channel,
+		       enable);
+
+	return enable;
+}
+
+static void *jazz_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+{
+	struct page *page;
+	void *ret;
+
+	if (attrs & DMA_ATTR_NO_WARN)
+		gfp |= __GFP_NOWARN;
+
+	size = PAGE_ALIGN(size);
+	page = alloc_pages(gfp, get_order(size));
+	if (!page)
+		return NULL;
+	ret = page_address(page);
+	memset(ret, 0, size);
+	*dma_handle = vdma_alloc(virt_to_phys(ret), size);
+	if (*dma_handle == DMA_MAPPING_ERROR)
+		goto out_free_pages;
+	arch_dma_prep_coherent(page, size);
+	return (void *)(UNCAC_BASE + __pa(ret));
+
+out_free_pages:
+	__free_pages(page, get_order(size));
+	return NULL;
+}
+
+static void jazz_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, unsigned long attrs)
+{
+	vdma_free(dma_handle);
+	__free_pages(virt_to_page(vaddr), get_order(size));
+}
+
+static dma_addr_t jazz_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size, enum dma_data_direction dir,
+		unsigned long attrs)
+{
+	phys_addr_t phys = page_to_phys(page) + offset;
+
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		arch_sync_dma_for_device(phys, size, dir);
+	return vdma_alloc(phys, size);
+}
+
+static void jazz_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
+{
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		arch_sync_dma_for_cpu(vdma_log2phys(dma_addr), size, dir);
+	vdma_free(dma_addr);
+}
+
+static int jazz_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction dir, unsigned long attrs)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nents, i) {
+		if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+			arch_sync_dma_for_device(sg_phys(sg), sg->length,
+				dir);
+		sg->dma_address = vdma_alloc(sg_phys(sg), sg->length);
+		if (sg->dma_address == DMA_MAPPING_ERROR)
+			return 0;
+		sg_dma_len(sg) = sg->length;
+	}
+
+	return nents;
+}
+
+static void jazz_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction dir, unsigned long attrs)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nents, i) {
+		if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+			arch_sync_dma_for_cpu(sg_phys(sg), sg->length, dir);
+		vdma_free(sg->dma_address);
+	}
+}
+
+static void jazz_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	arch_sync_dma_for_device(vdma_log2phys(addr), size, dir);
+}
+
+static void jazz_dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	arch_sync_dma_for_cpu(vdma_log2phys(addr), size, dir);
+}
+
+static void jazz_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sgl, sg, nents, i)
+		arch_sync_dma_for_device(sg_phys(sg), sg->length, dir);
+}
+
+static void jazz_dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sgl, sg, nents, i)
+		arch_sync_dma_for_cpu(sg_phys(sg), sg->length, dir);
+}
+
+const struct dma_map_ops jazz_dma_ops = {
+	.alloc			= jazz_dma_alloc,
+	.free			= jazz_dma_free,
+	.map_page		= jazz_dma_map_page,
+	.unmap_page		= jazz_dma_unmap_page,
+	.map_sg			= jazz_dma_map_sg,
+	.unmap_sg		= jazz_dma_unmap_sg,
+	.sync_single_for_cpu	= jazz_dma_sync_single_for_cpu,
+	.sync_single_for_device	= jazz_dma_sync_single_for_device,
+	.sync_sg_for_cpu	= jazz_dma_sync_sg_for_cpu,
+	.sync_sg_for_device	= jazz_dma_sync_sg_for_device,
+	.mmap			= dma_common_mmap,
+	.get_sgtable		= dma_common_get_sgtable,
+	.alloc_pages		= dma_common_alloc_pages,
+	.free_pages		= dma_common_free_pages,
+};
+EXPORT_SYMBOL(jazz_dma_ops);
diff --git a/arch/mips/jazz/reset.c b/arch/mips/jazz/reset.c
new file mode 100644
index 000000000..052b01f5d
--- /dev/null
+++ b/arch/mips/jazz/reset.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Reset a Jazz machine.
+ *
+ * We don't trust the firmware so we do it the classic way by poking and
+ * stabbing at the keyboard controller ...
+ */
+#include <linux/jiffies.h>
+#include <asm/jazz.h>
+
+#define KBD_STAT_IBF		0x02	/* Keyboard input buffer full */
+
+static void jazz_write_output(unsigned char val)
+{
+	int status;
+
+	do {
+		status = jazz_kh->command;
+	} while (status & KBD_STAT_IBF);
+	jazz_kh->data = val;
+}
+
+static void jazz_write_command(unsigned char val)
+{
+	int status;
+
+	do {
+		status = jazz_kh->command;
+	} while (status & KBD_STAT_IBF);
+	jazz_kh->command = val;
+}
+
+static unsigned char jazz_read_status(void)
+{
+	return jazz_kh->command;
+}
+
+static inline void kb_wait(void)
+{
+	unsigned long start = jiffies;
+	unsigned long timeout = start + HZ/2;
+
+	do {
+		if (! (jazz_read_status() & 0x02))
+			return;
+	} while (time_before_eq(jiffies, timeout));
+}
+
+void jazz_machine_restart(char *command)
+{
+	while(1) {
+		kb_wait();
+		jazz_write_command(0xd1);
+		kb_wait();
+		jazz_write_output(0x00);
+	}
+}
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
new file mode 100644
index 000000000..04aab419a
--- /dev/null
+++ b/arch/mips/jazz/setup.c
@@ -0,0 +1,212 @@
+/*
+ * Setup pointers to hardware-dependent routines.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle
+ * Copyright (C) 2001 MIPS Technologies, Inc.
+ * Copyright (C) 2007 by Thomas Bogendoerfer
+ */
+#include <linux/eisa.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/console.h>
+#include <linux/screen_info.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/dma-mapping.h>
+#include <linux/pgtable.h>
+
+#include <asm/jazz.h>
+#include <asm/jazzdma.h>
+#include <asm/reboot.h>
+#include <asm/tlbmisc.h>
+
+extern asmlinkage void jazz_handle_int(void);
+
+extern void jazz_machine_restart(char *command);
+
+static struct resource jazz_io_resources[] = {
+	{
+		.start	= 0x00,
+		.end	= 0x1f,
+		.name	= "dma1",
+		.flags	= IORESOURCE_IO | IORESOURCE_BUSY
+	}, {
+		.start	= 0x40,
+		.end	= 0x5f,
+		.name	= "timer",
+		.flags	= IORESOURCE_IO | IORESOURCE_BUSY
+	}, {
+		.start	= 0x80,
+		.end	= 0x8f,
+		.name	= "dma page reg",
+		.flags	= IORESOURCE_IO | IORESOURCE_BUSY
+	}, {
+		.start	= 0xc0,
+		.end	= 0xdf,
+		.name	= "dma2",
+		.flags	= IORESOURCE_IO | IORESOURCE_BUSY
+	}
+};
+
+void __init plat_mem_setup(void)
+{
+	int i;
+
+	/* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
+	add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K);
+	/* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
+	add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M);
+	/* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
+	add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M);
+
+	set_io_port_base(JAZZ_PORT_BASE);
+#ifdef CONFIG_EISA
+	EISA_bus = 1;
+#endif
+
+	/* request I/O space for devices used on all i[345]86 PCs */
+	for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
+		request_resource(&ioport_resource, jazz_io_resources + i);
+
+	/* The RTC is outside the port address space */
+
+	_machine_restart = jazz_machine_restart;
+
+#ifdef CONFIG_VT
+	screen_info = (struct screen_info) {
+		.orig_video_cols	= 160,
+		.orig_video_lines	= 64,
+		.orig_video_points	= 16,
+	};
+#endif
+
+	add_preferred_console("ttyS", 0, "9600");
+}
+
+#ifdef CONFIG_OLIVETTI_M700
+#define UART_CLK  1843200
+#else
+/* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
+   exactly which ones ... XXX */
+#define UART_CLK (8000000 / 16) /* ( 3072000 / 16) */
+#endif
+
+#define MEMPORT(_base, _irq)				\
+	{						\
+		.mapbase	= (_base),		\
+		.membase	= (void *)(_base),	\
+		.irq		= (_irq),		\
+		.uartclk	= UART_CLK,		\
+		.iotype		= UPIO_MEM,		\
+		.flags		= UPF_BOOT_AUTOCONF,	\
+	}
+
+static struct plat_serial8250_port jazz_serial_data[] = {
+	MEMPORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ),
+	MEMPORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ),
+	{ },
+};
+
+static struct platform_device jazz_serial8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= jazz_serial_data,
+	},
+};
+
+static struct resource jazz_esp_rsrc[] = {
+	{
+		.start = JAZZ_SCSI_BASE,
+		.end   = JAZZ_SCSI_BASE + 31,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = JAZZ_SCSI_DMA,
+		.end   = JAZZ_SCSI_DMA,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = JAZZ_SCSI_IRQ,
+		.end   = JAZZ_SCSI_IRQ,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static u64 jazz_esp_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device jazz_esp_pdev = {
+	.name		= "jazz_esp",
+	.num_resources	= ARRAY_SIZE(jazz_esp_rsrc),
+	.resource	= jazz_esp_rsrc,
+	.dev = {
+		.dma_mask	   = &jazz_esp_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	}
+};
+
+static struct resource jazz_sonic_rsrc[] = {
+	{
+		.start = JAZZ_ETHERNET_BASE,
+		.end   = JAZZ_ETHERNET_BASE + 0xff,
+		.flags = IORESOURCE_MEM
+	},
+	{
+		.start = JAZZ_ETHERNET_IRQ,
+		.end   = JAZZ_ETHERNET_IRQ,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static u64 jazz_sonic_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device jazz_sonic_pdev = {
+	.name		= "jazzsonic",
+	.num_resources	= ARRAY_SIZE(jazz_sonic_rsrc),
+	.resource	= jazz_sonic_rsrc,
+	.dev = {
+		.dma_mask	   = &jazz_sonic_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	}
+};
+
+static struct resource jazz_cmos_rsrc[] = {
+	{
+		.start = 0x70,
+		.end   = 0x71,
+		.flags = IORESOURCE_IO
+	},
+	{
+		.start = 8,
+		.end   = 8,
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct platform_device jazz_cmos_pdev = {
+	.name		= "rtc_cmos",
+	.num_resources	= ARRAY_SIZE(jazz_cmos_rsrc),
+	.resource	= jazz_cmos_rsrc
+};
+
+static struct platform_device pcspeaker_pdev = {
+	.name		= "pcspkr",
+	.id		= -1,
+};
+
+static int __init jazz_setup_devinit(void)
+{
+	platform_device_register(&jazz_serial8250_device);
+	platform_device_register(&jazz_esp_pdev);
+	platform_device_register(&jazz_sonic_pdev);
+	platform_device_register(&jazz_cmos_pdev);
+	platform_device_register(&pcspeaker_pdev);
+
+	return 0;
+}
+
+device_initcall(jazz_setup_devinit);