Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 2162 insertions, 0 deletions

diff --git a/arch/mips/netlogic/xlp/Makefile b/arch/mips/netlogic/xlp/Makefile
new file mode 100644
index 000000000..d62465717
--- /dev/null
+++ b/arch/mips/netlogic/xlp/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y				+= setup.o nlm_hal.o cop2-ex.o dt.o
+obj-$(CONFIG_SMP)		+= wakeup.o
+ifdef CONFIG_USB
+obj-y				+= usb-init.o
+obj-y				+= usb-init-xlp2.o
+endif
+ifdef CONFIG_SATA_AHCI
+obj-y				+= ahci-init.o
+obj-y				+= ahci-init-xlp2.o
+endif
diff --git a/arch/mips/netlogic/xlp/ahci-init-xlp2.c b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
new file mode 100644
index 000000000..c11b9c7dc
--- /dev/null
+++ b/arch/mips/netlogic/xlp/ahci-init-xlp2.c
@@ -0,0 +1,390 @@
+/*
+ * Copyright (c) 2003-2014 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+#include <linux/pci_ids.h>
+#include <linux/nodemask.h>
+
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/mips-extns.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+
+#define SATA_CTL		0x0
+#define SATA_STATUS		0x1 /* Status Reg */
+#define SATA_INT		0x2 /* Interrupt Reg */
+#define SATA_INT_MASK		0x3 /* Interrupt Mask Reg */
+#define SATA_BIU_TIMEOUT	0x4
+#define AXIWRSPERRLOG		0x5
+#define AXIRDSPERRLOG		0x6
+#define BiuTimeoutLow		0x7
+#define BiuTimeoutHi		0x8
+#define BiuSlvErLow		0x9
+#define BiuSlvErHi		0xa
+#define IO_CONFIG_SWAP_DIS	0xb
+#define CR_REG_TIMER		0xc
+#define CORE_ID			0xd
+#define AXI_SLAVE_OPT1		0xe
+#define PHY_MEM_ACCESS		0xf
+#define PHY0_CNTRL		0x10
+#define PHY0_STAT		0x11
+#define PHY0_RX_ALIGN		0x12
+#define PHY0_RX_EQ_LO		0x13
+#define PHY0_RX_EQ_HI		0x14
+#define PHY0_BIST_LOOP		0x15
+#define PHY1_CNTRL		0x16
+#define PHY1_STAT		0x17
+#define PHY1_RX_ALIGN		0x18
+#define PHY1_RX_EQ_LO		0x19
+#define PHY1_RX_EQ_HI		0x1a
+#define PHY1_BIST_LOOP		0x1b
+#define RdExBase		0x1c
+#define RdExLimit		0x1d
+#define CacheAllocBase		0x1e
+#define CacheAllocLimit		0x1f
+#define BiuSlaveCmdGstNum	0x20
+
+/*SATA_CTL Bits */
+#define SATA_RST_N		BIT(0)  /* Active low reset sata_core phy */
+#define SataCtlReserve0		BIT(1)
+#define M_CSYSREQ		BIT(2)  /* AXI master low power, not used */
+#define S_CSYSREQ		BIT(3)  /* AXI slave low power, not used */
+#define P0_CP_DET		BIT(8)  /* Reserved, bring in from pad */
+#define P0_MP_SW		BIT(9)  /* Mech Switch */
+#define P0_DISABLE		BIT(10) /* disable p0 */
+#define P0_ACT_LED_EN		BIT(11) /* Active LED enable */
+#define P0_IRST_HARD_SYNTH	BIT(12) /* PHY hard synth reset */
+#define P0_IRST_HARD_TXRX	BIT(13) /* PHY lane hard reset */
+#define P0_IRST_POR		BIT(14) /* PHY power on reset*/
+#define P0_IPDTXL		BIT(15) /* PHY Tx lane dis/power down */
+#define P0_IPDRXL		BIT(16) /* PHY Rx lane dis/power down */
+#define P0_IPDIPDMSYNTH		BIT(17) /* PHY synthesizer dis/porwer down */
+#define P0_CP_POD_EN		BIT(18) /* CP_POD enable */
+#define P0_AT_BYPASS		BIT(19) /* P0 address translation by pass */
+#define P1_CP_DET		BIT(20) /* Reserved,Cold Detect */
+#define P1_MP_SW		BIT(21) /* Mech Switch */
+#define P1_DISABLE		BIT(22) /* disable p1 */
+#define P1_ACT_LED_EN		BIT(23) /* Active LED enable */
+#define P1_IRST_HARD_SYNTH	BIT(24) /* PHY hard synth reset */
+#define P1_IRST_HARD_TXRX	BIT(25) /* PHY lane hard reset */
+#define P1_IRST_POR		BIT(26) /* PHY power on reset*/
+#define P1_IPDTXL		BIT(27) /* PHY Tx lane dis/porwer down */
+#define P1_IPDRXL		BIT(28) /* PHY Rx lane dis/porwer down */
+#define P1_IPDIPDMSYNTH		BIT(29) /* PHY synthesizer dis/porwer down */
+#define P1_CP_POD_EN		BIT(30)
+#define P1_AT_BYPASS		BIT(31) /* P1 address translation by pass */
+
+/* Status register */
+#define M_CACTIVE		BIT(0)  /* m_cactive, not used */
+#define S_CACTIVE		BIT(1)  /* s_cactive, not used */
+#define P0_PHY_READY		BIT(8)  /* phy is ready */
+#define P0_CP_POD		BIT(9)  /* Cold PowerOn */
+#define P0_SLUMBER		BIT(10) /* power mode slumber */
+#define P0_PATIAL		BIT(11) /* power mode patial */
+#define P0_PHY_SIG_DET		BIT(12) /* phy dignal detect */
+#define P0_PHY_CALI		BIT(13) /* phy calibration done */
+#define P1_PHY_READY		BIT(16) /* phy is ready */
+#define P1_CP_POD		BIT(17) /* Cold PowerOn */
+#define P1_SLUMBER		BIT(18) /* power mode slumber */
+#define P1_PATIAL		BIT(19) /* power mode patial */
+#define P1_PHY_SIG_DET		BIT(20) /* phy dignal detect */
+#define P1_PHY_CALI		BIT(21) /* phy calibration done */
+
+/* SATA CR_REG_TIMER bits */
+#define CR_TIME_SCALE		(0x1000 << 0)
+
+/* SATA PHY specific registers start and end address */
+#define RXCDRCALFOSC0		0x0065
+#define CALDUTY			0x006e
+#define RXDPIF			0x8065
+#define PPMDRIFTMAX_HI		0x80A4
+
+#define nlm_read_sata_reg(b, r)		nlm_read_reg(b, r)
+#define nlm_write_sata_reg(b, r, v)	nlm_write_reg(b, r, v)
+#define nlm_get_sata_pcibase(node)	\
+		nlm_pcicfg_base(XLP9XX_IO_SATA_OFFSET(node))
+#define nlm_get_sata_regbase(node)	\
+		(nlm_get_sata_pcibase(node) + 0x100)
+
+/* SATA PHY config for register block 1 0x0065 .. 0x006e */
+static const u8 sata_phy_config1[]  = {
+	0xC9, 0xC9, 0x07, 0x07, 0x18, 0x18, 0x01, 0x01, 0x22, 0x00
+};
+
+/* SATA PHY config for register block 2 0x8065 .. 0x80A4 */
+static const u8 sata_phy_config2[]  = {
+	0xAA, 0x00, 0x4C, 0xC9, 0xC9, 0x07, 0x07, 0x18,
+	0x18, 0x05, 0x0C, 0x10, 0x00, 0x10, 0x00, 0xFF,
+	0xCF, 0xF7, 0xE1, 0xF5, 0xFD, 0xFD, 0xFF, 0xFF,
+	0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5, 0xFD, 0xFD,
+	0xF5, 0xF5, 0xFF, 0xFF, 0xE3, 0xE7, 0xDB, 0xF5,
+	0xFD, 0xFD, 0xF5, 0xF5, 0xFF, 0xFF, 0xFF, 0xF5,
+	0x3F, 0x00, 0x32, 0x00, 0x03, 0x01, 0x05, 0x05,
+	0x04, 0x00, 0x00, 0x08, 0x04, 0x00, 0x00, 0x04,
+};
+
+const int sata_phy_debug = 0;	/* set to verify PHY writes */
+
+static void sata_clear_glue_reg(u64 regbase, u32 off, u32 bit)
+{
+	u32 reg_val;
+
+	reg_val = nlm_read_sata_reg(regbase, off);
+	nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
+}
+
+static void sata_set_glue_reg(u64 regbase, u32 off, u32 bit)
+{
+	u32 reg_val;
+
+	reg_val = nlm_read_sata_reg(regbase, off);
+	nlm_write_sata_reg(regbase, off, (reg_val | bit));
+}
+
+static void write_phy_reg(u64 regbase, u32 addr, u32 physel, u8 data)
+{
+	nlm_write_sata_reg(regbase, PHY_MEM_ACCESS,
+		(1u << 31) | (physel << 24) | (data << 16) | addr);
+	udelay(850);
+}
+
+static u8 read_phy_reg(u64 regbase, u32 addr, u32 physel)
+{
+	u32 val;
+
+	nlm_write_sata_reg(regbase, PHY_MEM_ACCESS,
+		(0 << 31) | (physel << 24) | (0 << 16) | addr);
+	udelay(850);
+	val = nlm_read_sata_reg(regbase, PHY_MEM_ACCESS);
+	return (val >> 16) & 0xff;
+}
+
+static void config_sata_phy(u64 regbase)
+{
+	u32 port, i, reg;
+	u8 val;
+
+	for (port = 0; port < 2; port++) {
+		for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
+			write_phy_reg(regbase, reg, port, sata_phy_config1[i]);
+
+		for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
+			write_phy_reg(regbase, reg, port, sata_phy_config2[i]);
+
+		/* Fix for PHY link up failures at lower temperatures */
+		write_phy_reg(regbase, 0x800F, port, 0x1f);
+
+		val = read_phy_reg(regbase, 0x0029, port);
+		write_phy_reg(regbase, 0x0029, port, val | (0x7 << 1));
+
+		val = read_phy_reg(regbase, 0x0056, port);
+		write_phy_reg(regbase, 0x0056, port, val & ~(1 << 3));
+
+		val = read_phy_reg(regbase, 0x0018, port);
+		write_phy_reg(regbase, 0x0018, port, val & ~(0x7 << 0));
+	}
+}
+
+static void check_phy_register(u64 regbase, u32 addr, u32 physel, u8 xdata)
+{
+	u8 data;
+
+	data = read_phy_reg(regbase, addr, physel);
+	pr_info("PHY read addr = 0x%x physel = %d data = 0x%x %s\n",
+		addr, physel, data, data == xdata ? "TRUE" : "FALSE");
+}
+
+static void verify_sata_phy_config(u64 regbase)
+{
+	u32 port, i, reg;
+
+	for (port = 0; port < 2; port++) {
+		for (i = 0, reg = RXCDRCALFOSC0; reg <= CALDUTY; reg++, i++)
+			check_phy_register(regbase, reg, port,
+						sata_phy_config1[i]);
+
+		for (i = 0, reg = RXDPIF; reg <= PPMDRIFTMAX_HI; reg++, i++)
+			check_phy_register(regbase, reg, port,
+						sata_phy_config2[i]);
+	}
+}
+
+static void nlm_sata_firmware_init(int node)
+{
+	u32 reg_val;
+	u64 regbase;
+	int n;
+
+	pr_info("Initializing XLP9XX On-chip AHCI...\n");
+	regbase = nlm_get_sata_regbase(node);
+
+	/* Reset port0 */
+	sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_POR);
+	sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX);
+	sata_clear_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH);
+	sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDTXL);
+	sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDRXL);
+	sata_clear_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH);
+
+	/* port1 */
+	sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_POR);
+	sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX);
+	sata_clear_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH);
+	sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDTXL);
+	sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDRXL);
+	sata_clear_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH);
+	udelay(300);
+
+	/* Set PHY */
+	sata_set_glue_reg(regbase, SATA_CTL, P0_IPDTXL);
+	sata_set_glue_reg(regbase, SATA_CTL, P0_IPDRXL);
+	sata_set_glue_reg(regbase, SATA_CTL, P0_IPDIPDMSYNTH);
+	sata_set_glue_reg(regbase, SATA_CTL, P1_IPDTXL);
+	sata_set_glue_reg(regbase, SATA_CTL, P1_IPDRXL);
+	sata_set_glue_reg(regbase, SATA_CTL, P1_IPDIPDMSYNTH);
+
+	udelay(1000);
+	sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_POR);
+	udelay(1000);
+	sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_POR);
+	udelay(1000);
+
+	/* setup PHY */
+	config_sata_phy(regbase);
+	if (sata_phy_debug)
+		verify_sata_phy_config(regbase);
+
+	udelay(1000);
+	sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_TXRX);
+	sata_set_glue_reg(regbase, SATA_CTL, P0_IRST_HARD_SYNTH);
+	sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_TXRX);
+	sata_set_glue_reg(regbase, SATA_CTL, P1_IRST_HARD_SYNTH);
+	udelay(300);
+
+	/* Override reset in serial PHY mode */
+	sata_set_glue_reg(regbase, CR_REG_TIMER, CR_TIME_SCALE);
+	/* Set reset SATA */
+	sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+	sata_set_glue_reg(regbase, SATA_CTL, M_CSYSREQ);
+	sata_set_glue_reg(regbase, SATA_CTL, S_CSYSREQ);
+
+	pr_debug("Waiting for PHYs to come up.\n");
+	n = 10000;
+	do {
+		reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
+		if ((reg_val & P1_PHY_READY) && (reg_val & P0_PHY_READY))
+			break;
+		udelay(10);
+	} while (--n > 0);
+
+	if (reg_val  & P0_PHY_READY)
+		pr_info("PHY0 is up.\n");
+	else
+		pr_info("PHY0 is down.\n");
+	if (reg_val  & P1_PHY_READY)
+		pr_info("PHY1 is up.\n");
+	else
+		pr_info("PHY1 is down.\n");
+
+	pr_info("XLP AHCI Init Done.\n");
+}
+
+static int __init nlm_ahci_init(void)
+{
+	int node;
+
+	if (!cpu_is_xlp9xx())
+		return 0;
+	for (node = 0; node < NLM_NR_NODES; node++)
+		if (nlm_node_present(node))
+			nlm_sata_firmware_init(node);
+	return 0;
+}
+
+static void nlm_sata_intr_ack(struct irq_data *data)
+{
+	u64 regbase;
+	u32 val;
+	int node;
+
+	node = data->irq / NLM_IRQS_PER_NODE;
+	regbase = nlm_get_sata_regbase(node);
+	val = nlm_read_sata_reg(regbase, SATA_INT);
+	sata_set_glue_reg(regbase, SATA_INT, val);
+}
+
+static void nlm_sata_fixup_bar(struct pci_dev *dev)
+{
+	dev->resource[5] = dev->resource[0];
+	memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
+}
+
+static void nlm_sata_fixup_final(struct pci_dev *dev)
+{
+	u32 val;
+	u64 regbase;
+	int node;
+
+	/* Find end bridge function to find node */
+	node = xlp_socdev_to_node(dev);
+	regbase = nlm_get_sata_regbase(node);
+
+	/* clear pending interrupts and then enable them */
+	val = nlm_read_sata_reg(regbase, SATA_INT);
+	sata_set_glue_reg(regbase, SATA_INT, val);
+
+	/* Enable only the core interrupt */
+	sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);
+
+	dev->irq = nlm_irq_to_xirq(node, PIC_SATA_IRQ);
+	nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
+}
+
+arch_initcall(nlm_ahci_init);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA,
+		nlm_sata_fixup_bar);
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_SATA,
+		nlm_sata_fixup_final);
diff --git a/arch/mips/netlogic/xlp/ahci-init.c b/arch/mips/netlogic/xlp/ahci-init.c
new file mode 100644
index 000000000..92be1a325
--- /dev/null
+++ b/arch/mips/netlogic/xlp/ahci-init.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright (c) 2003-2014 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/bitops.h>
+
+#include <asm/cpu.h>
+#include <asm/mipsregs.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/mips-extns.h>
+
+#define SATA_CTL		0x0
+#define SATA_STATUS		0x1	/* Status Reg */
+#define SATA_INT		0x2	/* Interrupt Reg */
+#define SATA_INT_MASK		0x3	/* Interrupt Mask Reg */
+#define SATA_CR_REG_TIMER	0x4	/* PHY Conrol Timer Reg */
+#define SATA_CORE_ID		0x5	/* Core ID Reg */
+#define SATA_AXI_SLAVE_OPT1	0x6	/* AXI Slave Options Reg */
+#define SATA_PHY_LOS_LEV	0x7	/* PHY LOS Level Reg */
+#define SATA_PHY_MULTI		0x8	/* PHY Multiplier Reg */
+#define SATA_PHY_CLK_SEL	0x9	/* Clock Select Reg */
+#define SATA_PHY_AMP1_GEN1	0xa	/* PHY Transmit Amplitude Reg 1 */
+#define SATA_PHY_AMP1_GEN2	0xb	/* PHY Transmit Amplitude Reg 2 */
+#define SATA_PHY_AMP1_GEN3	0xc	/* PHY Transmit Amplitude Reg 3 */
+#define SATA_PHY_PRE1		0xd	/* PHY Transmit Preemphasis Reg 1 */
+#define SATA_PHY_PRE2		0xe	/* PHY Transmit Preemphasis Reg 2 */
+#define SATA_PHY_PRE3		0xf	/* PHY Transmit Preemphasis Reg 3 */
+#define SATA_SPDMODE		0x10	/* Speed Mode Reg */
+#define SATA_REFCLK		0x11	/* Reference Clock Control Reg */
+#define SATA_BYTE_SWAP_DIS	0x12	/* byte swap disable */
+
+/*SATA_CTL Bits */
+#define SATA_RST_N		BIT(0)
+#define PHY0_RESET_N		BIT(16)
+#define PHY1_RESET_N		BIT(17)
+#define PHY2_RESET_N		BIT(18)
+#define PHY3_RESET_N		BIT(19)
+#define M_CSYSREQ		BIT(2)
+#define S_CSYSREQ		BIT(3)
+
+/*SATA_STATUS Bits */
+#define P0_PHY_READY		BIT(4)
+#define P1_PHY_READY		BIT(5)
+#define P2_PHY_READY		BIT(6)
+#define P3_PHY_READY		BIT(7)
+
+#define nlm_read_sata_reg(b, r)		nlm_read_reg(b, r)
+#define nlm_write_sata_reg(b, r, v)	nlm_write_reg(b, r, v)
+#define nlm_get_sata_pcibase(node)	\
+		nlm_pcicfg_base(XLP_IO_SATA_OFFSET(node))
+/* SATA device specific configuration registers are starts at 0x900 offset */
+#define nlm_get_sata_regbase(node)	\
+		(nlm_get_sata_pcibase(node) + 0x900)
+
+static void sata_clear_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
+{
+	uint32_t reg_val;
+
+	reg_val = nlm_read_sata_reg(regbase, off);
+	nlm_write_sata_reg(regbase, off, (reg_val & ~bit));
+}
+
+static void sata_set_glue_reg(uint64_t regbase, uint32_t off, uint32_t bit)
+{
+	uint32_t reg_val;
+
+	reg_val = nlm_read_sata_reg(regbase, off);
+	nlm_write_sata_reg(regbase, off, (reg_val | bit));
+}
+
+static void nlm_sata_firmware_init(int node)
+{
+	uint32_t reg_val;
+	uint64_t regbase;
+	int i;
+
+	pr_info("XLP AHCI Initialization started.\n");
+	regbase = nlm_get_sata_regbase(node);
+
+	/* Reset SATA */
+	sata_clear_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+	/* Reset PHY */
+	sata_clear_glue_reg(regbase, SATA_CTL,
+			(PHY3_RESET_N | PHY2_RESET_N
+			 | PHY1_RESET_N | PHY0_RESET_N));
+
+	/* Set SATA */
+	sata_set_glue_reg(regbase, SATA_CTL, SATA_RST_N);
+	/* Set PHY */
+	sata_set_glue_reg(regbase, SATA_CTL,
+			(PHY3_RESET_N | PHY2_RESET_N
+			 | PHY1_RESET_N | PHY0_RESET_N));
+
+	pr_debug("Waiting for PHYs to come up.\n");
+	i = 0;
+	do {
+		reg_val = nlm_read_sata_reg(regbase, SATA_STATUS);
+		i++;
+	} while (((reg_val & 0xF0) != 0xF0) && (i < 10000));
+
+	for (i = 0; i < 4; i++) {
+		if (reg_val  & (P0_PHY_READY << i))
+			pr_info("PHY%d is up.\n", i);
+		else
+			pr_info("PHY%d is down.\n", i);
+	}
+
+	pr_info("XLP AHCI init done.\n");
+}
+
+static int __init nlm_ahci_init(void)
+{
+	int node = 0;
+	int chip = read_c0_prid() & PRID_IMP_MASK;
+
+	if (chip == PRID_IMP_NETLOGIC_XLP3XX)
+		nlm_sata_firmware_init(node);
+	return 0;
+}
+
+static void nlm_sata_intr_ack(struct irq_data *data)
+{
+	uint32_t val = 0;
+	uint64_t regbase;
+
+	regbase = nlm_get_sata_regbase(nlm_nodeid());
+	val = nlm_read_sata_reg(regbase, SATA_INT);
+	sata_set_glue_reg(regbase, SATA_INT, val);
+}
+
+static void nlm_sata_fixup_bar(struct pci_dev *dev)
+{
+	/*
+	 * The AHCI resource is in BAR 0, move it to
+	 * BAR 5, where it is expected
+	 */
+	dev->resource[5] = dev->resource[0];
+	memset(&dev->resource[0], 0, sizeof(dev->resource[0]));
+}
+
+static void nlm_sata_fixup_final(struct pci_dev *dev)
+{
+	uint32_t val;
+	uint64_t regbase;
+	int node = 0; /* XLP3XX does not support multi-node */
+
+	regbase = nlm_get_sata_regbase(node);
+
+	/* clear pending interrupts and then enable them */
+	val = nlm_read_sata_reg(regbase, SATA_INT);
+	sata_set_glue_reg(regbase, SATA_INT, val);
+
+	/* Mask the core interrupt. If all the interrupts
+	 * are enabled there are spurious interrupt flow
+	 * happening, to avoid only enable core interrupt
+	 * mask.
+	 */
+	sata_set_glue_reg(regbase, SATA_INT_MASK, 0x1);
+
+	dev->irq = PIC_SATA_IRQ;
+	nlm_set_pic_extra_ack(node, PIC_SATA_IRQ, nlm_sata_intr_ack);
+}
+
+arch_initcall(nlm_ahci_init);
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
+		nlm_sata_fixup_bar);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_SATA,
+		nlm_sata_fixup_final);
diff --git a/arch/mips/netlogic/xlp/cop2-ex.c b/arch/mips/netlogic/xlp/cop2-ex.c
new file mode 100644
index 000000000..21e439b3d
--- /dev/null
+++ b/arch/mips/netlogic/xlp/cop2-ex.c
@@ -0,0 +1,121 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Broadcom Corporation.
+ *
+ * based on arch/mips/cavium-octeon/cpu.c
+ * Copyright (C) 2009 Wind River Systems,
+ *   written by Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/capability.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/notifier.h>
+#include <linux/prefetch.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+
+#include <asm/cop2.h>
+#include <asm/current.h>
+#include <asm/mipsregs.h>
+#include <asm/page.h>
+
+#include <asm/netlogic/mips-extns.h>
+
+/*
+ * 64 bit ops are done in inline assembly to support 32 bit
+ * compilation
+ */
+void nlm_cop2_save(struct nlm_cop2_state *r)
+{
+	asm volatile(
+		".set	push\n"
+		".set	noat\n"
+		"dmfc2	$1, $0, 0\n"
+		"sd	$1, 0(%1)\n"
+		"dmfc2	$1, $0, 1\n"
+		"sd	$1, 8(%1)\n"
+		"dmfc2	$1, $0, 2\n"
+		"sd	$1, 16(%1)\n"
+		"dmfc2	$1, $0, 3\n"
+		"sd	$1, 24(%1)\n"
+		"dmfc2	$1, $1, 0\n"
+		"sd	$1, 0(%2)\n"
+		"dmfc2	$1, $1, 1\n"
+		"sd	$1, 8(%2)\n"
+		"dmfc2	$1, $1, 2\n"
+		"sd	$1, 16(%2)\n"
+		"dmfc2	$1, $1, 3\n"
+		"sd	$1, 24(%2)\n"
+		".set	pop\n"
+		: "=m"(*r)
+		: "r"(r->tx), "r"(r->rx));
+
+	r->tx_msg_status = __read_32bit_c2_register($2, 0);
+	r->rx_msg_status = __read_32bit_c2_register($3, 0) & 0x0fffffff;
+}
+
+void nlm_cop2_restore(struct nlm_cop2_state *r)
+{
+	u32 rstat;
+
+	asm volatile(
+		".set	push\n"
+		".set	noat\n"
+		"ld	$1, 0(%1)\n"
+		"dmtc2	$1, $0, 0\n"
+		"ld	$1, 8(%1)\n"
+		"dmtc2	$1, $0, 1\n"
+		"ld	$1, 16(%1)\n"
+		"dmtc2	$1, $0, 2\n"
+		"ld	$1, 24(%1)\n"
+		"dmtc2	$1, $0, 3\n"
+		"ld	$1, 0(%2)\n"
+		"dmtc2	$1, $1, 0\n"
+		"ld	$1, 8(%2)\n"
+		"dmtc2	$1, $1, 1\n"
+		"ld	$1, 16(%2)\n"
+		"dmtc2	$1, $1, 2\n"
+		"ld	$1, 24(%2)\n"
+		"dmtc2	$1, $1, 3\n"
+		".set	pop\n"
+		: : "m"(*r), "r"(r->tx), "r"(r->rx));
+
+	__write_32bit_c2_register($2, 0, r->tx_msg_status);
+	rstat = __read_32bit_c2_register($3, 0) & 0xf0000000u;
+	__write_32bit_c2_register($3, 0, r->rx_msg_status | rstat);
+}
+
+static int nlm_cu2_call(struct notifier_block *nfb, unsigned long action,
+	void *data)
+{
+	unsigned long flags;
+	unsigned int status;
+
+	switch (action) {
+	case CU2_EXCEPTION:
+		if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+			break;
+		local_irq_save(flags);
+		KSTK_STATUS(current) |= ST0_CU2;
+		status = read_c0_status();
+		write_c0_status(status | ST0_CU2);
+		nlm_cop2_restore(&(current->thread.cp2));
+		write_c0_status(status & ~ST0_CU2);
+		local_irq_restore(flags);
+		pr_info("COP2 access enabled for pid %d (%s)\n",
+					current->pid, current->comm);
+		return NOTIFY_BAD;	/* Don't call default notifier */
+	}
+
+	return NOTIFY_OK;		/* Let default notifier send signals */
+}
+
+static int __init nlm_cu2_setup(void)
+{
+	return cu2_notifier(nlm_cu2_call, 0);
+}
+early_initcall(nlm_cu2_setup);
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
new file mode 100644
index 000000000..c856f2a3e
--- /dev/null
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2003-2013 Broadcom Corporation.
+ * All Rights Reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+
+#include <asm/prom.h>
+
+extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[], __dtb_xlp_fvp_begin[],
+	__dtb_xlp_gvp_begin[], __dtb_xlp_rvp_begin[];
+static void *xlp_fdt_blob;
+
+void __init *xlp_dt_init(void *fdtp)
+{
+	if (!fdtp) {
+		switch (current_cpu_data.processor_id & PRID_IMP_MASK) {
+#ifdef CONFIG_DT_XLP_RVP
+		case PRID_IMP_NETLOGIC_XLP5XX:
+			fdtp = __dtb_xlp_rvp_begin;
+			break;
+#endif
+#ifdef CONFIG_DT_XLP_GVP
+		case PRID_IMP_NETLOGIC_XLP9XX:
+			fdtp = __dtb_xlp_gvp_begin;
+			break;
+#endif
+#ifdef CONFIG_DT_XLP_FVP
+		case PRID_IMP_NETLOGIC_XLP2XX:
+			fdtp = __dtb_xlp_fvp_begin;
+			break;
+#endif
+#ifdef CONFIG_DT_XLP_SVP
+		case PRID_IMP_NETLOGIC_XLP3XX:
+			fdtp = __dtb_xlp_svp_begin;
+			break;
+#endif
+#ifdef CONFIG_DT_XLP_EVP
+		case PRID_IMP_NETLOGIC_XLP8XX:
+			fdtp = __dtb_xlp_evp_begin;
+			break;
+#endif
+		default:
+			/* Pick a built-in if any, and hope for the best */
+			fdtp = __dtb_start;
+			break;
+		}
+	}
+	xlp_fdt_blob = fdtp;
+	return fdtp;
+}
+
+void __init xlp_early_init_devtree(void)
+{
+	__dt_setup_arch(xlp_fdt_blob);
+}
+
+void __init device_tree_init(void)
+{
+	unflatten_and_copy_device_tree();
+}
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
new file mode 100644
index 000000000..25ee69489
--- /dev/null
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -0,0 +1,508 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+
+#include <asm/mipsregs.h>
+#include <asm/time.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/bridge.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+
+/* Main initialization */
+void nlm_node_init(int node)
+{
+	struct nlm_soc_info *nodep;
+
+	nodep = nlm_get_node(node);
+	if (node == 0)
+		nodep->coremask = 1;	/* node 0, boot cpu */
+	nodep->sysbase = nlm_get_sys_regbase(node);
+	nodep->picbase = nlm_get_pic_regbase(node);
+	nodep->ebase = read_c0_ebase() & MIPS_EBASE_BASE;
+	if (cpu_is_xlp9xx())
+		nodep->socbus = xlp9xx_get_socbus(node);
+	else
+		nodep->socbus = 0;
+	spin_lock_init(&nodep->piclock);
+}
+
+static int xlp9xx_irq_to_irt(int irq)
+{
+	switch (irq) {
+	case PIC_GPIO_IRQ:
+		return 12;
+	case PIC_I2C_0_IRQ:
+		return 125;
+	case PIC_I2C_1_IRQ:
+		return 126;
+	case PIC_I2C_2_IRQ:
+		return 127;
+	case PIC_I2C_3_IRQ:
+		return 128;
+	case PIC_9XX_XHCI_0_IRQ:
+		return 114;
+	case PIC_9XX_XHCI_1_IRQ:
+		return 115;
+	case PIC_9XX_XHCI_2_IRQ:
+		return 116;
+	case PIC_UART_0_IRQ:
+		return 133;
+	case PIC_UART_1_IRQ:
+		return 134;
+	case PIC_SATA_IRQ:
+		return 143;
+	case PIC_NAND_IRQ:
+		return 151;
+	case PIC_SPI_IRQ:
+		return 152;
+	case PIC_MMC_IRQ:
+		return 153;
+	case PIC_PCIE_LINK_LEGACY_IRQ(0):
+	case PIC_PCIE_LINK_LEGACY_IRQ(1):
+	case PIC_PCIE_LINK_LEGACY_IRQ(2):
+	case PIC_PCIE_LINK_LEGACY_IRQ(3):
+		return 191 + irq - PIC_PCIE_LINK_LEGACY_IRQ_BASE;
+	}
+	return -1;
+}
+
+static int xlp_irq_to_irt(int irq)
+{
+	uint64_t pcibase;
+	int devoff, irt;
+
+	devoff = 0;
+	switch (irq) {
+	case PIC_UART_0_IRQ:
+		devoff = XLP_IO_UART0_OFFSET(0);
+		break;
+	case PIC_UART_1_IRQ:
+		devoff = XLP_IO_UART1_OFFSET(0);
+		break;
+	case PIC_MMC_IRQ:
+		devoff = XLP_IO_MMC_OFFSET(0);
+		break;
+	case PIC_I2C_0_IRQ:	/* I2C will be fixed up */
+	case PIC_I2C_1_IRQ:
+	case PIC_I2C_2_IRQ:
+	case PIC_I2C_3_IRQ:
+		if (cpu_is_xlpii())
+			devoff = XLP2XX_IO_I2C_OFFSET(0);
+		else
+			devoff = XLP_IO_I2C0_OFFSET(0);
+		break;
+	case PIC_SATA_IRQ:
+		devoff = XLP_IO_SATA_OFFSET(0);
+		break;
+	case PIC_GPIO_IRQ:
+		devoff = XLP_IO_GPIO_OFFSET(0);
+		break;
+	case PIC_NAND_IRQ:
+		devoff = XLP_IO_NAND_OFFSET(0);
+		break;
+	case PIC_SPI_IRQ:
+		devoff = XLP_IO_SPI_OFFSET(0);
+		break;
+	default:
+		if (cpu_is_xlpii()) {
+			switch (irq) {
+				/* XLP2XX has three XHCI USB controller */
+			case PIC_2XX_XHCI_0_IRQ:
+				devoff = XLP2XX_IO_USB_XHCI0_OFFSET(0);
+				break;
+			case PIC_2XX_XHCI_1_IRQ:
+				devoff = XLP2XX_IO_USB_XHCI1_OFFSET(0);
+				break;
+			case PIC_2XX_XHCI_2_IRQ:
+				devoff = XLP2XX_IO_USB_XHCI2_OFFSET(0);
+				break;
+			}
+		} else {
+			switch (irq) {
+			case PIC_EHCI_0_IRQ:
+				devoff = XLP_IO_USB_EHCI0_OFFSET(0);
+				break;
+			case PIC_EHCI_1_IRQ:
+				devoff = XLP_IO_USB_EHCI1_OFFSET(0);
+				break;
+			case PIC_OHCI_0_IRQ:
+				devoff = XLP_IO_USB_OHCI0_OFFSET(0);
+				break;
+			case PIC_OHCI_1_IRQ:
+				devoff = XLP_IO_USB_OHCI1_OFFSET(0);
+				break;
+			case PIC_OHCI_2_IRQ:
+				devoff = XLP_IO_USB_OHCI2_OFFSET(0);
+				break;
+			case PIC_OHCI_3_IRQ:
+				devoff = XLP_IO_USB_OHCI3_OFFSET(0);
+				break;
+			}
+		}
+	}
+
+	if (devoff != 0) {
+		uint32_t val;
+
+		pcibase = nlm_pcicfg_base(devoff);
+		val = nlm_read_reg(pcibase, XLP_PCI_IRTINFO_REG);
+		if (val == 0xffffffff) {
+			irt = -1;
+		} else {
+			irt = val & 0xffff;
+			/* HW weirdness, I2C IRT entry has to be fixed up */
+			switch (irq) {
+			case PIC_I2C_1_IRQ:
+				irt = irt + 1; break;
+			case PIC_I2C_2_IRQ:
+				irt = irt + 2; break;
+			case PIC_I2C_3_IRQ:
+				irt = irt + 3; break;
+			}
+		}
+	} else if (irq >= PIC_PCIE_LINK_LEGACY_IRQ(0) &&
+			irq <= PIC_PCIE_LINK_LEGACY_IRQ(3)) {
+		/* HW bug, PCI IRT entries are bad on early silicon, fix */
+		irt = PIC_IRT_PCIE_LINK_INDEX(irq -
+					PIC_PCIE_LINK_LEGACY_IRQ_BASE);
+	} else {
+		irt = -1;
+	}
+	return irt;
+}
+
+int nlm_irq_to_irt(int irq)
+{
+	/* return -2 for irqs without 1-1 mapping */
+	if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) && irq <= PIC_PCIE_LINK_MSI_IRQ(3))
+		return -2;
+	if (irq >= PIC_PCIE_MSIX_IRQ(0) && irq <= PIC_PCIE_MSIX_IRQ(3))
+		return -2;
+
+	if (cpu_is_xlp9xx())
+		return xlp9xx_irq_to_irt(irq);
+	else
+		return xlp_irq_to_irt(irq);
+}
+
+static unsigned int nlm_xlp2_get_core_frequency(int node, int core)
+{
+	unsigned int pll_post_div, ctrl_val0, ctrl_val1, denom;
+	uint64_t num, sysbase, clockbase;
+
+	if (cpu_is_xlp9xx()) {
+		clockbase = nlm_get_clock_regbase(node);
+		ctrl_val0 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_CPU_PLL_CTRL0(core));
+		ctrl_val1 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_CPU_PLL_CTRL1(core));
+	} else {
+		sysbase = nlm_get_node(node)->sysbase;
+		ctrl_val0 = nlm_read_sys_reg(sysbase,
+						SYS_CPU_PLL_CTRL0(core));
+		ctrl_val1 = nlm_read_sys_reg(sysbase,
+						SYS_CPU_PLL_CTRL1(core));
+	}
+
+	/* Find PLL post divider value */
+	switch ((ctrl_val0 >> 24) & 0x7) {
+	case 1:
+		pll_post_div = 2;
+		break;
+	case 3:
+		pll_post_div = 4;
+		break;
+	case 7:
+		pll_post_div = 8;
+		break;
+	case 6:
+		pll_post_div = 16;
+		break;
+	case 0:
+	default:
+		pll_post_div = 1;
+		break;
+	}
+
+	num = 1000000ULL * (400 * 3 + 100 * (ctrl_val1 & 0x3f));
+	denom = 3 * pll_post_div;
+	do_div(num, denom);
+
+	return (unsigned int)num;
+}
+
+static unsigned int nlm_xlp_get_core_frequency(int node, int core)
+{
+	unsigned int pll_divf, pll_divr, dfs_div, ext_div;
+	unsigned int rstval, dfsval, denom;
+	uint64_t num, sysbase;
+
+	sysbase = nlm_get_node(node)->sysbase;
+	rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
+	dfsval = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIV_VALUE);
+	pll_divf = ((rstval >> 10) & 0x7f) + 1;
+	pll_divr = ((rstval >> 8)  & 0x3) + 1;
+	ext_div  = ((rstval >> 30) & 0x3) + 1;
+	dfs_div  = ((dfsval >> (core * 4)) & 0xf) + 1;
+
+	num = 800000000ULL * pll_divf;
+	denom = 3 * pll_divr * ext_div * dfs_div;
+	do_div(num, denom);
+
+	return (unsigned int)num;
+}
+
+unsigned int nlm_get_core_frequency(int node, int core)
+{
+	if (cpu_is_xlpii())
+		return nlm_xlp2_get_core_frequency(node, core);
+	else
+		return nlm_xlp_get_core_frequency(node, core);
+}
+
+/*
+ * Calculate PIC frequency from PLL registers.
+ * freq_out = (ref_freq/2 * (6 + ctrl2[7:0]) + ctrl2[20:8]/2^13) /
+ * 		((2^ctrl0[7:5]) * Table(ctrl0[26:24]))
+ */
+static unsigned int nlm_xlp2_get_pic_frequency(int node)
+{
+	u32 ctrl_val0, ctrl_val2, vco_post_div, pll_post_div, cpu_xlp9xx;
+	u32 mdiv, fdiv, pll_out_freq_den, reg_select, ref_div, pic_div;
+	u64 sysbase, pll_out_freq_num, ref_clk_select, clockbase, ref_clk;
+
+	sysbase = nlm_get_node(node)->sysbase;
+	clockbase = nlm_get_clock_regbase(node);
+	cpu_xlp9xx = cpu_is_xlp9xx();
+
+	/* Find ref_clk_base */
+	if (cpu_xlp9xx)
+		ref_clk_select = (nlm_read_sys_reg(sysbase,
+				SYS_9XX_POWER_ON_RESET_CFG) >> 18) & 0x3;
+	else
+		ref_clk_select = (nlm_read_sys_reg(sysbase,
+					SYS_POWER_ON_RESET_CFG) >> 18) & 0x3;
+	switch (ref_clk_select) {
+	case 0:
+		ref_clk = 200000000ULL;
+		ref_div = 3;
+		break;
+	case 1:
+		ref_clk = 100000000ULL;
+		ref_div = 1;
+		break;
+	case 2:
+		ref_clk = 125000000ULL;
+		ref_div = 1;
+		break;
+	case 3:
+		ref_clk = 400000000ULL;
+		ref_div = 3;
+		break;
+	}
+
+	/* Find the clock source PLL device for PIC */
+	if (cpu_xlp9xx) {
+		reg_select = nlm_read_sys_reg(clockbase,
+				SYS_9XX_CLK_DEV_SEL_REG) & 0x3;
+		switch (reg_select) {
+		case 0:
+			ctrl_val0 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_PLL_CTRL0);
+			ctrl_val2 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_PLL_CTRL2);
+			break;
+		case 1:
+			ctrl_val0 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_PLL_CTRL0_DEVX(0));
+			ctrl_val2 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_PLL_CTRL2_DEVX(0));
+			break;
+		case 2:
+			ctrl_val0 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_PLL_CTRL0_DEVX(1));
+			ctrl_val2 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_PLL_CTRL2_DEVX(1));
+			break;
+		case 3:
+			ctrl_val0 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_PLL_CTRL0_DEVX(2));
+			ctrl_val2 = nlm_read_sys_reg(clockbase,
+					SYS_9XX_PLL_CTRL2_DEVX(2));
+			break;
+		}
+	} else {
+		reg_select = (nlm_read_sys_reg(sysbase,
+					SYS_CLK_DEV_SEL_REG) >> 22) & 0x3;
+		switch (reg_select) {
+		case 0:
+			ctrl_val0 = nlm_read_sys_reg(sysbase,
+					SYS_PLL_CTRL0);
+			ctrl_val2 = nlm_read_sys_reg(sysbase,
+					SYS_PLL_CTRL2);
+			break;
+		case 1:
+			ctrl_val0 = nlm_read_sys_reg(sysbase,
+					SYS_PLL_CTRL0_DEVX(0));
+			ctrl_val2 = nlm_read_sys_reg(sysbase,
+					SYS_PLL_CTRL2_DEVX(0));
+			break;
+		case 2:
+			ctrl_val0 = nlm_read_sys_reg(sysbase,
+					SYS_PLL_CTRL0_DEVX(1));
+			ctrl_val2 = nlm_read_sys_reg(sysbase,
+					SYS_PLL_CTRL2_DEVX(1));
+			break;
+		case 3:
+			ctrl_val0 = nlm_read_sys_reg(sysbase,
+					SYS_PLL_CTRL0_DEVX(2));
+			ctrl_val2 = nlm_read_sys_reg(sysbase,
+					SYS_PLL_CTRL2_DEVX(2));
+			break;
+		}
+	}
+
+	vco_post_div = (ctrl_val0 >> 5) & 0x7;
+	pll_post_div = (ctrl_val0 >> 24) & 0x7;
+	mdiv = ctrl_val2 & 0xff;
+	fdiv = (ctrl_val2 >> 8) & 0x1fff;
+
+	/* Find PLL post divider value */
+	switch (pll_post_div) {
+	case 1:
+		pll_post_div = 2;
+		break;
+	case 3:
+		pll_post_div = 4;
+		break;
+	case 7:
+		pll_post_div = 8;
+		break;
+	case 6:
+		pll_post_div = 16;
+		break;
+	case 0:
+	default:
+		pll_post_div = 1;
+		break;
+	}
+
+	fdiv = fdiv/(1 << 13);
+	pll_out_freq_num = ((ref_clk >> 1) * (6 + mdiv)) + fdiv;
+	pll_out_freq_den = (1 << vco_post_div) * pll_post_div * ref_div;
+
+	if (pll_out_freq_den > 0)
+		do_div(pll_out_freq_num, pll_out_freq_den);
+
+	/* PIC post divider, which happens after PLL */
+	if (cpu_xlp9xx)
+		pic_div = nlm_read_sys_reg(clockbase,
+				SYS_9XX_CLK_DEV_DIV_REG) & 0x3;
+	else
+		pic_div = (nlm_read_sys_reg(sysbase,
+					SYS_CLK_DEV_DIV_REG) >> 22) & 0x3;
+	do_div(pll_out_freq_num, 1 << pic_div);
+
+	return pll_out_freq_num;
+}
+
+unsigned int nlm_get_pic_frequency(int node)
+{
+	if (cpu_is_xlpii())
+		return nlm_xlp2_get_pic_frequency(node);
+	else
+		return 133333333;
+}
+
+unsigned int nlm_get_cpu_frequency(void)
+{
+	return nlm_get_core_frequency(0, 0);
+}
+
+/*
+ * Fills upto 8 pairs of entries containing the DRAM map of a node
+ * if node < 0, get dram map for all nodes
+ */
+int nlm_get_dram_map(int node, uint64_t *dram_map, int nentries)
+{
+	uint64_t bridgebase, base, lim;
+	uint32_t val;
+	unsigned int barreg, limreg, xlatreg;
+	int i, n, rv;
+
+	/* Look only at mapping on Node 0, we don't handle crazy configs */
+	bridgebase = nlm_get_bridge_regbase(0);
+	rv = 0;
+	for (i = 0; i < 8; i++) {
+		if (rv + 1 >= nentries)
+			break;
+		if (cpu_is_xlp9xx()) {
+			barreg = BRIDGE_9XX_DRAM_BAR(i);
+			limreg = BRIDGE_9XX_DRAM_LIMIT(i);
+			xlatreg = BRIDGE_9XX_DRAM_NODE_TRANSLN(i);
+		} else {
+			barreg = BRIDGE_DRAM_BAR(i);
+			limreg = BRIDGE_DRAM_LIMIT(i);
+			xlatreg = BRIDGE_DRAM_NODE_TRANSLN(i);
+		}
+		if (node >= 0) {
+			/* node specified, get node mapping of BAR */
+			val = nlm_read_bridge_reg(bridgebase, xlatreg);
+			n = (val >> 1) & 0x3;
+			if (n != node)
+				continue;
+		}
+		val = nlm_read_bridge_reg(bridgebase, barreg);
+		val = (val >>  12) & 0xfffff;
+		base = (uint64_t) val << 20;
+		val = nlm_read_bridge_reg(bridgebase, limreg);
+		val = (val >>  12) & 0xfffff;
+		if (val == 0)   /* BAR not used */
+			continue;
+		lim = ((uint64_t)val + 1) << 20;
+		dram_map[rv] = base;
+		dram_map[rv + 1] = lim;
+		rv += 2;
+	}
+	return rv;
+}
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
new file mode 100644
index 000000000..9adc0c1b4
--- /dev/null
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_fdt.h>
+#include <linux/memblock.h>
+
+#include <asm/idle.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+
+uint64_t nlm_io_base;
+struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
+cpumask_t nlm_cpumask = CPU_MASK_CPU0;
+unsigned int nlm_threads_per_core;
+
+static void nlm_linux_exit(void)
+{
+	uint64_t sysbase = nlm_get_node(0)->sysbase;
+
+	if (cpu_is_xlp9xx())
+		nlm_write_sys_reg(sysbase, SYS_9XX_CHIP_RESET, 1);
+	else
+		nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1);
+	for ( ; ; )
+		cpu_wait();
+}
+
+static void nlm_fixup_mem(void)
+{
+	const int pref_backup = 512;
+	struct memblock_region *mem;
+
+	for_each_mem_region(mem) {
+		memblock_remove(mem->base + mem->size - pref_backup,
+			pref_backup);
+	}
+}
+
+static void __init xlp_init_mem_from_bars(void)
+{
+	uint64_t map[16];
+	int i, n;
+
+	n = nlm_get_dram_map(-1, map, ARRAY_SIZE(map));	/* -1 : all nodes */
+	for (i = 0; i < n; i += 2) {
+		/* exclude 0x1000_0000-0x2000_0000, u-boot device */
+		if (map[i] <= 0x10000000 && map[i+1] > 0x10000000)
+			map[i+1] = 0x10000000;
+		if (map[i] > 0x10000000 && map[i] < 0x20000000)
+			map[i] = 0x20000000;
+
+		memblock_add(map[i], map[i+1] - map[i]);
+	}
+}
+
+void __init plat_mem_setup(void)
+{
+#ifdef CONFIG_SMP
+	nlm_wakeup_secondary_cpus();
+
+	/* update TLB size after waking up threads */
+	current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+	register_smp_ops(&nlm_smp_ops);
+#endif
+	_machine_restart = (void (*)(char *))nlm_linux_exit;
+	_machine_halt	= nlm_linux_exit;
+	pm_power_off	= nlm_linux_exit;
+
+	/* memory and bootargs from DT */
+	xlp_early_init_devtree();
+
+	if (memblock_end_of_DRAM() == 0) {
+		pr_info("Using DRAM BARs for memory map.\n");
+		xlp_init_mem_from_bars();
+	}
+	/* Calculate and setup wired entries for mapped kernel */
+	nlm_fixup_mem();
+}
+
+const char *get_system_type(void)
+{
+	switch (read_c0_prid() & PRID_IMP_MASK) {
+	case PRID_IMP_NETLOGIC_XLP9XX:
+	case PRID_IMP_NETLOGIC_XLP5XX:
+	case PRID_IMP_NETLOGIC_XLP2XX:
+		return "Broadcom XLPII Series";
+	default:
+		return "Netlogic XLP Series";
+	}
+}
+
+void __init prom_free_prom_memory(void)
+{
+	/* Nothing yet */
+}
+
+void xlp_mmu_init(void)
+{
+	u32 conf4;
+
+	if (cpu_is_xlpii()) {
+		/* XLPII series has extended pagesize in config 4 */
+		conf4 = read_c0_config4() & ~0x1f00u;
+		write_c0_config4(conf4 | ((PAGE_SHIFT - 10) / 2 << 8));
+	} else {
+		/* enable extended TLB and Large Fixed TLB */
+		write_c0_config6(read_c0_config6() | 0x24);
+
+		/* set page mask of extended Fixed TLB in config7 */
+		write_c0_config7(PM_DEFAULT_MASK >>
+			(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
+	}
+}
+
+void nlm_percpu_init(int hwcpuid)
+{
+}
+
+void __init prom_init(void)
+{
+	void *reset_vec;
+
+	nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
+	nlm_init_boot_cpu();
+	xlp_mmu_init();
+	nlm_node_init(0);
+	xlp_dt_init((void *)(long)fw_arg0);
+
+	/* Update reset entry point with CPU init code */
+	reset_vec = (void *)CKSEG1ADDR(RESET_VEC_PHYS);
+	memset(reset_vec, 0, RESET_VEC_SIZE);
+	memcpy(reset_vec, (void *)nlm_reset_entry,
+			(nlm_reset_entry_end - nlm_reset_entry));
+
+#ifdef CONFIG_SMP
+	cpumask_setall(&nlm_cpumask);
+#endif
+}
diff --git a/arch/mips/netlogic/xlp/usb-init-xlp2.c b/arch/mips/netlogic/xlp/usb-init-xlp2.c
new file mode 100644
index 000000000..2524939a5
--- /dev/null
+++ b/arch/mips/netlogic/xlp/usb-init-xlp2.c
@@ -0,0 +1,288 @@
+/*
+ * Copyright (c) 2003-2013 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+
+#define XLPII_USB3_CTL_0		0xc0
+#define XLPII_VAUXRST			BIT(0)
+#define XLPII_VCCRST			BIT(1)
+#define XLPII_NUM2PORT			9
+#define XLPII_NUM3PORT			13
+#define XLPII_RTUNEREQ			BIT(20)
+#define XLPII_MS_CSYSREQ		BIT(21)
+#define XLPII_XS_CSYSREQ		BIT(22)
+#define XLPII_RETENABLEN		BIT(23)
+#define XLPII_TX2RX			BIT(24)
+#define XLPII_XHCIREV			BIT(25)
+#define XLPII_ECCDIS			BIT(26)
+
+#define XLPII_USB3_INT_REG		0xc2
+#define XLPII_USB3_INT_MASK		0xc3
+
+#define XLPII_USB_PHY_TEST		0xc6
+#define XLPII_PRESET			BIT(0)
+#define XLPII_ATERESET			BIT(1)
+#define XLPII_LOOPEN			BIT(2)
+#define XLPII_TESTPDHSP			BIT(3)
+#define XLPII_TESTPDSSP			BIT(4)
+#define XLPII_TESTBURNIN		BIT(5)
+
+#define XLPII_USB_PHY_LOS_LV		0xc9
+#define XLPII_LOSLEV			0
+#define XLPII_LOSBIAS			5
+#define XLPII_SQRXTX			8
+#define XLPII_TXBOOST			11
+#define XLPII_RSLKSEL			16
+#define XLPII_FSEL			20
+
+#define XLPII_USB_RFCLK_REG		0xcc
+#define XLPII_VVLD			30
+
+#define nlm_read_usb_reg(b, r)		nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v)	nlm_write_reg(b, r, v)
+
+#define nlm_xlpii_get_usb_pcibase(node, inst)			\
+			nlm_pcicfg_base(cpu_is_xlp9xx() ?	\
+			XLP9XX_IO_USB_OFFSET(node, inst) :	\
+			XLP2XX_IO_USB_OFFSET(node, inst))
+#define nlm_xlpii_get_usb_regbase(node, inst)		\
+	(nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
+
+static void xlp2xx_usb_ack(struct irq_data *data)
+{
+	u64 port_addr;
+
+	switch (data->irq) {
+	case PIC_2XX_XHCI_0_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 1);
+		break;
+	case PIC_2XX_XHCI_1_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 2);
+		break;
+	case PIC_2XX_XHCI_2_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(0, 3);
+		break;
+	default:
+		pr_err("No matching USB irq!\n");
+		return;
+	}
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+}
+
+static void xlp9xx_usb_ack(struct irq_data *data)
+{
+	u64 port_addr;
+	int node, irq;
+
+	/* Find the node and irq on the node */
+	irq = data->irq % NLM_IRQS_PER_NODE;
+	node = data->irq / NLM_IRQS_PER_NODE;
+
+	switch (irq) {
+	case PIC_9XX_XHCI_0_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(node, 1);
+		break;
+	case PIC_9XX_XHCI_1_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(node, 2);
+		break;
+	case PIC_9XX_XHCI_2_IRQ:
+		port_addr = nlm_xlpii_get_usb_regbase(node, 3);
+		break;
+	default:
+		pr_err("No matching USB irq %d node  %d!\n", irq, node);
+		return;
+	}
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+}
+
+static void nlm_xlpii_usb_hw_reset(int node, int port)
+{
+	u64 port_addr, xhci_base, pci_base;
+	void __iomem *corebase;
+	u32 val;
+
+	port_addr = nlm_xlpii_get_usb_regbase(node, port);
+
+	/* Set frequency */
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV);
+	val &= ~(0x3f << XLPII_FSEL);
+	val |= (0x27 << XLPII_FSEL);
+	nlm_write_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV, val);
+
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_RFCLK_REG);
+	val |= (1 << XLPII_VVLD);
+	nlm_write_usb_reg(port_addr, XLPII_USB_RFCLK_REG, val);
+
+	/* PHY reset */
+	val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_TEST);
+	val &= (XLPII_ATERESET | XLPII_LOOPEN | XLPII_TESTPDHSP
+		| XLPII_TESTPDSSP | XLPII_TESTBURNIN);
+	nlm_write_usb_reg(port_addr, XLPII_USB_PHY_TEST, val);
+
+	/* Setup control register */
+	val =  XLPII_VAUXRST | XLPII_VCCRST | (1 << XLPII_NUM2PORT)
+		| (1 << XLPII_NUM3PORT) | XLPII_MS_CSYSREQ | XLPII_XS_CSYSREQ
+		| XLPII_RETENABLEN | XLPII_XHCIREV;
+	nlm_write_usb_reg(port_addr, XLPII_USB3_CTL_0, val);
+
+	/* Enable interrupts */
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_MASK, 0x00000001);
+
+	/* Clear all interrupts */
+	nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+
+	udelay(2000);
+
+	/* XHCI configuration at PCI mem */
+	pci_base = nlm_xlpii_get_usb_pcibase(node, port);
+	xhci_base = nlm_read_usb_reg(pci_base, 0x4) & ~0xf;
+	corebase = ioremap(xhci_base, 0x10000);
+	if (!corebase)
+		return;
+
+	writel(0x240002, corebase + 0xc2c0);
+	/* GCTL 0xc110 */
+	val = readl(corebase + 0xc110);
+	val &= ~(0x3 << 12);
+	val |= (1 << 12);
+	writel(val, corebase + 0xc110);
+	udelay(100);
+
+	/* PHYCFG 0xc200 */
+	val = readl(corebase + 0xc200);
+	val &= ~(1 << 6);
+	writel(val, corebase + 0xc200);
+	udelay(100);
+
+	/* PIPECTL 0xc2c0 */
+	val = readl(corebase + 0xc2c0);
+	val &= ~(1 << 17);
+	writel(val, corebase + 0xc2c0);
+
+	iounmap(corebase);
+}
+
+static int __init nlm_platform_xlpii_usb_init(void)
+{
+	int node;
+
+	if (!cpu_is_xlpii())
+		return 0;
+
+	if (!cpu_is_xlp9xx()) {
+		/* XLP 2XX single node */
+		pr_info("Initializing 2XX USB Interface\n");
+		nlm_xlpii_usb_hw_reset(0, 1);
+		nlm_xlpii_usb_hw_reset(0, 2);
+		nlm_xlpii_usb_hw_reset(0, 3);
+		nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlp2xx_usb_ack);
+		nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlp2xx_usb_ack);
+		nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlp2xx_usb_ack);
+		return 0;
+	}
+
+	/* XLP 9XX, multi-node */
+	pr_info("Initializing 9XX/5XX USB Interface\n");
+	for (node = 0; node < NLM_NR_NODES; node++) {
+		if (!nlm_node_present(node))
+			continue;
+		nlm_xlpii_usb_hw_reset(node, 1);
+		nlm_xlpii_usb_hw_reset(node, 2);
+		nlm_xlpii_usb_hw_reset(node, 3);
+		nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_0_IRQ, xlp9xx_usb_ack);
+		nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_1_IRQ, xlp9xx_usb_ack);
+		nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_2_IRQ, xlp9xx_usb_ack);
+	}
+	return 0;
+}
+
+arch_initcall(nlm_platform_xlpii_usb_init);
+
+static u64 xlp_usb_dmamask = ~(u32)0;
+
+/* Fixup the IRQ for USB devices which is exist on XLP9XX SOC PCIE bus */
+static void nlm_xlp9xx_usb_fixup_final(struct pci_dev *dev)
+{
+	int node;
+
+	node = xlp_socdev_to_node(dev);
+	dev->dev.dma_mask		= &xlp_usb_dmamask;
+	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
+	switch (dev->devfn) {
+	case 0x21:
+		dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_0_IRQ);
+		break;
+	case 0x22:
+		dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_1_IRQ);
+		break;
+	case 0x23:
+		dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_2_IRQ);
+		break;
+	}
+}
+
+/* Fixup the IRQ for USB devices which is exist on XLP2XX SOC PCIE bus */
+static void nlm_xlp2xx_usb_fixup_final(struct pci_dev *dev)
+{
+	dev->dev.dma_mask		= &xlp_usb_dmamask;
+	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
+	switch (dev->devfn) {
+	case 0x21:
+		dev->irq = PIC_2XX_XHCI_0_IRQ;
+		break;
+	case 0x22:
+		dev->irq = PIC_2XX_XHCI_1_IRQ;
+		break;
+	case 0x23:
+		dev->irq = PIC_2XX_XHCI_2_IRQ;
+		break;
+	}
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_XHCI,
+		nlm_xlp9xx_usb_fixup_final);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI,
+		nlm_xlp2xx_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlp/usb-init.c b/arch/mips/netlogic/xlp/usb-init.c
new file mode 100644
index 000000000..f8117985f
--- /dev/null
+++ b/arch/mips/netlogic/xlp/usb-init.c
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2003-2012 Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the Broadcom
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+
+/*
+ * USB glue logic registers, used only during initialization
+ */
+#define USB_CTL_0			0x01
+#define USB_PHY_0			0x0A
+#define USB_PHY_RESET			0x01
+#define USB_PHY_PORT_RESET_0		0x10
+#define USB_PHY_PORT_RESET_1		0x20
+#define USB_CONTROLLER_RESET		0x01
+#define USB_INT_STATUS			0x0E
+#define USB_INT_EN			0x0F
+#define USB_PHY_INTERRUPT_EN		0x01
+#define USB_OHCI_INTERRUPT_EN		0x02
+#define USB_OHCI_INTERRUPT1_EN		0x04
+#define USB_OHCI_INTERRUPT2_EN		0x08
+#define USB_CTRL_INTERRUPT_EN		0x10
+
+#define nlm_read_usb_reg(b, r)			nlm_read_reg(b, r)
+#define nlm_write_usb_reg(b, r, v)		nlm_write_reg(b, r, v)
+#define nlm_get_usb_pcibase(node, inst)		\
+	nlm_pcicfg_base(XLP_IO_USB_OFFSET(node, inst))
+#define nlm_get_usb_regbase(node, inst)		\
+	(nlm_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
+
+static void nlm_usb_intr_en(int node, int port)
+{
+	uint32_t val;
+	uint64_t port_addr;
+
+	port_addr = nlm_get_usb_regbase(node, port);
+	val = nlm_read_usb_reg(port_addr, USB_INT_EN);
+	val = USB_CTRL_INTERRUPT_EN  | USB_OHCI_INTERRUPT_EN |
+		USB_OHCI_INTERRUPT1_EN | USB_OHCI_INTERRUPT2_EN;
+	nlm_write_usb_reg(port_addr, USB_INT_EN, val);
+}
+
+static void nlm_usb_hw_reset(int node, int port)
+{
+	uint64_t port_addr;
+	uint32_t val;
+
+	/* reset USB phy */
+	port_addr = nlm_get_usb_regbase(node, port);
+	val = nlm_read_usb_reg(port_addr, USB_PHY_0);
+	val &= ~(USB_PHY_RESET | USB_PHY_PORT_RESET_0 | USB_PHY_PORT_RESET_1);
+	nlm_write_usb_reg(port_addr, USB_PHY_0, val);
+
+	mdelay(100);
+	val = nlm_read_usb_reg(port_addr, USB_CTL_0);
+	val &= ~(USB_CONTROLLER_RESET);
+	val |= 0x4;
+	nlm_write_usb_reg(port_addr, USB_CTL_0, val);
+}
+
+static int __init nlm_platform_usb_init(void)
+{
+	if (cpu_is_xlpii())
+		return 0;
+
+	pr_info("Initializing USB Interface\n");
+	nlm_usb_hw_reset(0, 0);
+	nlm_usb_hw_reset(0, 3);
+
+	/* Enable PHY interrupts */
+	nlm_usb_intr_en(0, 0);
+	nlm_usb_intr_en(0, 3);
+
+	return 0;
+}
+
+arch_initcall(nlm_platform_usb_init);
+
+static u64 xlp_usb_dmamask = ~(u32)0;
+
+/* Fixup the IRQ for USB devices which is exist on XLP SOC PCIE bus */
+static void nlm_usb_fixup_final(struct pci_dev *dev)
+{
+	dev->dev.dma_mask		= &xlp_usb_dmamask;
+	dev->dev.coherent_dma_mask	= DMA_BIT_MASK(32);
+	switch (dev->devfn) {
+	case 0x10:
+		dev->irq = PIC_EHCI_0_IRQ;
+		break;
+	case 0x11:
+		dev->irq = PIC_OHCI_0_IRQ;
+		break;
+	case 0x12:
+		dev->irq = PIC_OHCI_1_IRQ;
+		break;
+	case 0x13:
+		dev->irq = PIC_EHCI_1_IRQ;
+		break;
+	case 0x14:
+		dev->irq = PIC_OHCI_2_IRQ;
+		break;
+	case 0x15:
+		dev->irq = PIC_OHCI_3_IRQ;
+		break;
+	}
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_EHCI,
+		nlm_usb_fixup_final);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_OHCI,
+		nlm_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
new file mode 100644
index 000000000..d61004dd7
--- /dev/null
+++ b/arch/mips/netlogic/xlp/wakeup.c
@@ -0,0 +1,212 @@
+/*
+ * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
+ * reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the NetLogic
+ * license below:
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/string.h>
+
+#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
+#include <asm/netlogic/mips-extns.h>
+
+#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
+#include <asm/netlogic/xlp-hal/sys.h>
+
+static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
+{
+	uint32_t coremask, value;
+	int count, resetreg;
+
+	coremask = (1 << core);
+
+	/* Enable CPU clock in case of 8xx/3xx */
+	if (!cpu_is_xlpii()) {
+		value = nlm_read_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL);
+		value &= ~coremask;
+		nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value);
+	}
+
+	/* On 9XX, mark coherent first */
+	if (cpu_is_xlp9xx()) {
+		value = nlm_read_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE);
+		value &= ~coremask;
+		nlm_write_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE, value);
+	}
+
+	/* Remove CPU Reset */
+	resetreg = cpu_is_xlp9xx() ? SYS_9XX_CPU_RESET : SYS_CPU_RESET;
+	value = nlm_read_sys_reg(sysbase, resetreg);
+	value &= ~coremask;
+	nlm_write_sys_reg(sysbase, resetreg, value);
+
+	/* We are done on 9XX */
+	if (cpu_is_xlp9xx())
+		return 1;
+
+	/* Poll for CPU to mark itself coherent on other type of XLP */
+	count = 100000;
+	do {
+		value = nlm_read_sys_reg(sysbase, SYS_CPU_NONCOHERENT_MODE);
+	} while ((value & coremask) != 0 && --count > 0);
+
+	return count != 0;
+}
+
+static int wait_for_cpus(int cpu, int bootcpu)
+{
+	volatile uint32_t *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
+	int i, count, notready;
+
+	count = 0x800000;
+	do {
+		notready = nlm_threads_per_core;
+		for (i = 0; i < nlm_threads_per_core; i++)
+			if (cpu_ready[cpu + i] || (cpu + i) == bootcpu)
+				--notready;
+	} while (notready != 0 && --count > 0);
+
+	return count != 0;
+}
+
+static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
+{
+	struct nlm_soc_info *nodep;
+	uint64_t syspcibase, fusebase;
+	uint32_t syscoremask, mask, fusemask;
+	int core, n, cpu, ncores;
+
+	for (n = 0; n < NLM_NR_NODES; n++) {
+		if (n != 0) {
+			/* check if node exists and is online */
+			if (cpu_is_xlp9xx()) {
+				int b = xlp9xx_get_socbus(n);
+				pr_info("Node %d SoC PCI bus %d.\n", n, b);
+				if (b == 0)
+					break;
+			} else {
+				syspcibase = nlm_get_sys_pcibase(n);
+				if (nlm_read_reg(syspcibase, 0) == 0xffffffff)
+					break;
+			}
+			nlm_node_init(n);
+		}
+
+		/* read cores in reset from SYS */
+		nodep = nlm_get_node(n);
+
+		if (cpu_is_xlp9xx()) {
+			fusebase = nlm_get_fuse_regbase(n);
+			fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6);
+			switch (read_c0_prid() & PRID_IMP_MASK) {
+			case PRID_IMP_NETLOGIC_XLP5XX:
+				mask = 0xff;
+				break;
+			case PRID_IMP_NETLOGIC_XLP9XX:
+			default:
+				mask = 0xfffff;
+				break;
+			}
+		} else {
+			fusemask = nlm_read_sys_reg(nodep->sysbase,
+						SYS_EFUSE_DEVICE_CFG_STATUS0);
+			switch (read_c0_prid() & PRID_IMP_MASK) {
+			case PRID_IMP_NETLOGIC_XLP3XX:
+				mask = 0xf;
+				break;
+			case PRID_IMP_NETLOGIC_XLP2XX:
+				mask = 0x3;
+				break;
+			case PRID_IMP_NETLOGIC_XLP8XX:
+			default:
+				mask = 0xff;
+				break;
+			}
+		}
+
+		/*
+		 * Fused out cores are set in the fusemask, and the remaining
+		 * cores are renumbered to range 0 .. nactive-1
+		 */
+		syscoremask = (1 << hweight32(~fusemask & mask)) - 1;
+
+		pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask);
+		ncores = nlm_cores_per_node();
+		for (core = 0; core < ncores; core++) {
+			/* we will be on node 0 core 0 */
+			if (n == 0 && core == 0)
+				continue;
+
+			/* see if the core exists */
+			if ((syscoremask & (1 << core)) == 0)
+				continue;
+
+			/* see if at least the first hw thread is enabled */
+			cpu = (n * ncores + core) * NLM_THREADS_PER_CORE;
+			if (!cpumask_test_cpu(cpu, wakeup_mask))
+				continue;
+
+			/* wake up the core */
+			if (!xlp_wakeup_core(nodep->sysbase, n, core))
+				continue;
+
+			/* core is up */
+			nodep->coremask |= 1u << core;
+
+			/* spin until the hw threads sets their ready */
+			if (!wait_for_cpus(cpu, 0))
+				pr_err("Node %d : timeout core %d\n", n, core);
+		}
+	}
+}
+
+void xlp_wakeup_secondary_cpus(void)
+{
+	/*
+	 * In case of u-boot, the secondaries are in reset
+	 * first wakeup core 0 threads
+	 */
+	xlp_boot_core0_siblings();
+	if (!wait_for_cpus(0, 0))
+		pr_err("Node 0 : timeout core 0\n");
+
+	/* now get other cores out of reset */
+	xlp_enable_secondary_cores(&nlm_cpumask);
+}