Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 985 insertions, 0 deletions

diff --git a/arch/nds32/include/asm/bitfield.h b/arch/nds32/include/asm/bitfield.h
new file mode 100644
index 000000000..b02a58e71
--- /dev/null
+++ b/arch/nds32/include/asm/bitfield.h
@@ -0,0 +1,985 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+// Copyright (C) 2005-2017 Andes Technology Corporation
+
+#ifndef __NDS32_BITFIELD_H__
+#define __NDS32_BITFIELD_H__
+/******************************************************************************
+ * cr0: CPU_VER (CPU Version Register)
+ *****************************************************************************/
+#define CPU_VER_offCFGID	0	/* Minor configuration */
+#define CPU_VER_offREV		16	/* Revision of the CPU version */
+#define CPU_VER_offCPUID	24	/* Major CPU versions */
+
+#define CPU_VER_mskCFGID	( 0xFFFF  << CPU_VER_offCFGID )
+#define CPU_VER_mskREV		( 0xFF  << CPU_VER_offREV )
+#define CPU_VER_mskCPUID	( 0xFF  << CPU_VER_offCPUID )
+
+/******************************************************************************
+ * cr1: ICM_CFG (Instruction Cache/Memory Configuration Register)
+ *****************************************************************************/
+#define ICM_CFG_offISET		0	/* I-cache sets (# of cache lines) per way */
+#define ICM_CFG_offIWAY		3	/* I-cache ways */
+#define ICM_CFG_offISZ		6	/* I-cache line size */
+#define ICM_CFG_offILCK		9	/* I-cache locking support */
+#define ICM_CFG_offILMB		10	/* On-chip ILM banks */
+#define ICM_CFG_offBSAV		13	/* ILM base register alignment version */
+/* bit 15:31 reserved */
+
+#define ICM_CFG_mskISET		( 0x7  << ICM_CFG_offISET )
+#define ICM_CFG_mskIWAY		( 0x7  << ICM_CFG_offIWAY )
+#define ICM_CFG_mskISZ		( 0x7  << ICM_CFG_offISZ )
+#define ICM_CFG_mskILCK		( 0x1  << ICM_CFG_offILCK )
+#define ICM_CFG_mskILMB		( 0x7  << ICM_CFG_offILMB )
+#define ICM_CFG_mskBSAV		( 0x3  << ICM_CFG_offBSAV )
+
+/******************************************************************************
+ * cr2: DCM_CFG (Data Cache/Memory Configuration Register)
+ *****************************************************************************/
+#define DCM_CFG_offDSET		0	/* D-cache sets (# of cache lines) per way */
+#define DCM_CFG_offDWAY		3	/* D-cache ways */
+#define DCM_CFG_offDSZ		6	/* D-cache line size */
+#define DCM_CFG_offDLCK		9	/* D-cache locking support */
+#define DCM_CFG_offDLMB		10	/* On-chip DLM banks */
+#define DCM_CFG_offBSAV		13	/* DLM base register alignment version */
+/* bit 15:31 reserved */
+
+#define DCM_CFG_mskDSET		( 0x7  << DCM_CFG_offDSET )
+#define DCM_CFG_mskDWAY		( 0x7  << DCM_CFG_offDWAY )
+#define DCM_CFG_mskDSZ		( 0x7  << DCM_CFG_offDSZ )
+#define DCM_CFG_mskDLCK		( 0x1  << DCM_CFG_offDLCK )
+#define DCM_CFG_mskDLMB		( 0x7  << DCM_CFG_offDLMB )
+#define DCM_CFG_mskBSAV		( 0x3  << DCM_CFG_offBSAV )
+
+/******************************************************************************
+ * cr3: MMU_CFG (MMU Configuration Register)
+ *****************************************************************************/
+#define MMU_CFG_offMMPS		0	/* Memory management protection scheme */
+#define MMU_CFG_offMMPV		2	/* Memory management protection version number */
+#define MMU_CFG_offFATB		7	/* Fully-associative or non-fully-associative TLB */
+
+#define MMU_CFG_offTBW		8	/* TLB ways(non-associative) TBS */
+#define MMU_CFG_offTBS		11	/* TLB sets per way(non-associative) TBS */
+/* bit 14:14 reserved */
+
+#define MMU_CFG_offEP8MIN4	15	/* 8KB page supported while minimum page is 4KB */
+#define MMU_CFG_offfEPSZ	16	/* Extra page size supported */
+#define MMU_CFG_offTLBLCK	24	/* TLB locking support */
+#define MMU_CFG_offHPTWK	25	/* Hardware Page Table Walker implemented */
+#define MMU_CFG_offDE		26	/* Default endian */
+#define MMU_CFG_offNTPT		27	/* Partitions for non-translated attributes */
+#define MMU_CFG_offIVTB		28	/* Invisible TLB */
+#define MMU_CFG_offVLPT		29	/* VLPT for fast TLB fill handling implemented */
+#define MMU_CFG_offNTME		30	/* Non-translated VA to PA mapping */
+/* bit 31 reserved */
+
+#define MMU_CFG_mskMMPS		( 0x3  << MMU_CFG_offMMPS )
+#define MMU_CFG_mskMMPV		( 0x1F  << MMU_CFG_offMMPV )
+#define MMU_CFG_mskFATB		( 0x1  << MMU_CFG_offFATB )
+#define MMU_CFG_mskTBW		( 0x7  << MMU_CFG_offTBW )
+#define MMU_CFG_mskTBS		( 0x7  << MMU_CFG_offTBS )
+#define MMU_CFG_mskEP8MIN4	( 0x1  << MMU_CFG_offEP8MIN4 )
+#define MMU_CFG_mskfEPSZ	( 0xFF  << MMU_CFG_offfEPSZ )
+#define MMU_CFG_mskTLBLCK	( 0x1  << MMU_CFG_offTLBLCK )
+#define MMU_CFG_mskHPTWK	( 0x1  << MMU_CFG_offHPTWK )
+#define MMU_CFG_mskDE		( 0x1  << MMU_CFG_offDE )
+#define MMU_CFG_mskNTPT		( 0x1  << MMU_CFG_offNTPT )
+#define MMU_CFG_mskIVTB		( 0x1  << MMU_CFG_offIVTB )
+#define MMU_CFG_mskVLPT		( 0x1  << MMU_CFG_offVLPT )
+#define MMU_CFG_mskNTME		( 0x1  << MMU_CFG_offNTME )
+
+/******************************************************************************
+ * cr4: MSC_CFG (Misc Configuration Register)
+ *****************************************************************************/
+#define MSC_CFG_offEDM		0
+#define MSC_CFG_offLMDMA	1
+#define MSC_CFG_offPFM		2
+#define MSC_CFG_offHSMP		3
+#define MSC_CFG_offTRACE	4
+#define MSC_CFG_offDIV		5
+#define MSC_CFG_offMAC		6
+#define MSC_CFG_offAUDIO	7
+#define MSC_CFG_offL2C		9
+#define MSC_CFG_offRDREG	10
+#define MSC_CFG_offADR24	11
+#define MSC_CFG_offINTLC	12
+#define MSC_CFG_offBASEV	13
+#define MSC_CFG_offNOD		16
+/* bit 13:31 reserved */
+
+#define MSC_CFG_mskEDM		( 0x1  << MSC_CFG_offEDM )
+#define MSC_CFG_mskLMDMA	( 0x1  << MSC_CFG_offLMDMA )
+#define MSC_CFG_mskPFM		( 0x1  << MSC_CFG_offPFM )
+#define MSC_CFG_mskHSMP		( 0x1  << MSC_CFG_offHSMP )
+#define MSC_CFG_mskTRACE	( 0x1  << MSC_CFG_offTRACE )
+#define MSC_CFG_mskDIV		( 0x1  << MSC_CFG_offDIV )
+#define MSC_CFG_mskMAC		( 0x1  << MSC_CFG_offMAC )
+#define MSC_CFG_mskAUDIO	( 0x3  << MSC_CFG_offAUDIO )
+#define MSC_CFG_mskL2C		( 0x1  << MSC_CFG_offL2C )
+#define MSC_CFG_mskRDREG	( 0x1  << MSC_CFG_offRDREG )
+#define MSC_CFG_mskADR24	( 0x1  << MSC_CFG_offADR24 )
+#define MSC_CFG_mskINTLC	( 0x1  << MSC_CFG_offINTLC )
+#define MSC_CFG_mskBASEV	( 0x7  << MSC_CFG_offBASEV )
+#define MSC_CFG_mskNOD		( 0x1  << MSC_CFG_offNOD )
+
+/******************************************************************************
+ * cr5: CORE_CFG (Core Identification Register)
+ *****************************************************************************/
+#define CORE_ID_offCOREID	0
+/* bit 4:31 reserved */
+
+#define CORE_ID_mskCOREID	( 0xF  << CORE_ID_offCOREID )
+
+/******************************************************************************
+ * cr6: FUCOP_EXIST (FPU and Coprocessor Existence Configuration Register)
+ *****************************************************************************/
+#define FUCOP_EXIST_offCP0EX	0
+#define FUCOP_EXIST_offCP1EX	1
+#define FUCOP_EXIST_offCP2EX	2
+#define FUCOP_EXIST_offCP3EX	3
+#define FUCOP_EXIST_offCP0ISFPU	31
+
+#define FUCOP_EXIST_mskCP0EX	( 0x1  << FUCOP_EXIST_offCP0EX )
+#define FUCOP_EXIST_mskCP1EX	( 0x1  << FUCOP_EXIST_offCP1EX )
+#define FUCOP_EXIST_mskCP2EX	( 0x1  << FUCOP_EXIST_offCP2EX )
+#define FUCOP_EXIST_mskCP3EX	( 0x1  << FUCOP_EXIST_offCP3EX )
+#define FUCOP_EXIST_mskCP0ISFPU	( 0x1  << FUCOP_EXIST_offCP0ISFPU )
+
+/******************************************************************************
+ * ir0: PSW (Processor Status Word Register)
+ * ir1: IPSW (Interruption PSW Register)
+ * ir2: P_IPSW (Previous IPSW Register)
+ *****************************************************************************/
+#define PSW_offGIE		0	/* Global Interrupt Enable */
+#define PSW_offINTL		1	/* Interruption Stack Level */
+#define PSW_offPOM		3	/* Processor Operation Mode, User/Superuser */
+#define PSW_offBE		5	/* Endianness for data memory access, 1:MSB, 0:LSB */
+#define PSW_offIT		6	/* Enable instruction address translation */
+#define PSW_offDT		7	/* Enable data address translation */
+#define PSW_offIME		8	/* Instruction Machine Error flag */
+#define PSW_offDME		9	/* Data Machine Error flag */
+#define PSW_offDEX		10	/* Debug Exception */
+#define PSW_offHSS		11	/* Hardware Single Stepping */
+#define PSW_offDRBE		12	/* Device Register Endian Mode */
+#define PSW_offAEN		13	/* Audio ISA special feature */
+#define PSW_offWBNA		14	/* Write Back Non-Allocate */
+#define PSW_offIFCON		15	/* IFC On */
+#define PSW_offCPL		16	/* Current Priority Level */
+/* bit 19:31 reserved */
+
+#define PSW_mskGIE		( 0x1  << PSW_offGIE )
+#define PSW_mskINTL		( 0x3  << PSW_offINTL )
+#define PSW_mskPOM		( 0x3  << PSW_offPOM )
+#define PSW_mskBE		( 0x1  << PSW_offBE )
+#define PSW_mskIT		( 0x1  << PSW_offIT )
+#define PSW_mskDT		( 0x1  << PSW_offDT )
+#define PSW_mskIME		( 0x1  << PSW_offIME )
+#define PSW_mskDME		( 0x1  << PSW_offDME )
+#define PSW_mskDEX		( 0x1  << PSW_offDEX )
+#define PSW_mskHSS		( 0x1  << PSW_offHSS )
+#define PSW_mskDRBE		( 0x1  << PSW_offDRBE )
+#define PSW_mskAEN		( 0x1  << PSW_offAEN )
+#define PSW_mskWBNA		( 0x1  << PSW_offWBNA )
+#define PSW_mskIFCON		( 0x1  << PSW_offIFCON )
+#define PSW_mskCPL		( 0x7  << PSW_offCPL )
+
+#define PSW_SYSTEM		( 1 << PSW_offPOM )
+#define PSW_INTL_1		( 1 << PSW_offINTL )
+#define PSW_CPL_NO		( 0 << PSW_offCPL )
+#define PSW_CPL_ANY		( 7 << PSW_offCPL )
+
+#define PSW_clr			(PSW_mskGIE|PSW_mskINTL|PSW_mskPOM|PSW_mskIT|PSW_mskDT|PSW_mskIME|PSW_mskWBNA)
+#ifdef __NDS32_EB__
+#ifdef CONFIG_WBNA
+#define PSW_init		(PSW_mskWBNA|(1<<PSW_offINTL)|(1<<PSW_offPOM)|PSW_mskIT|PSW_mskDT|PSW_mskBE)
+#else
+#define PSW_init		((1<<PSW_offINTL)|(1<<PSW_offPOM)|PSW_mskIT|PSW_mskDT|PSW_mskBE)
+#endif
+#else
+#ifdef CONFIG_WBNA
+#define PSW_init		(PSW_mskWBNA|(1<<PSW_offINTL)|(1<<PSW_offPOM)|PSW_mskIT|PSW_mskDT)
+#else
+#define PSW_init		((1<<PSW_offINTL)|(1<<PSW_offPOM)|PSW_mskIT|PSW_mskDT)
+#endif
+#endif
+/******************************************************************************
+ * ir3: IVB (Interruption Vector Base Register)
+ *****************************************************************************/
+/* bit 0:12 reserved */
+#define IVB_offNIVIC		1	/* Number of input for IVIC Controller */
+#define IVB_offIVIC_VER		11	/* IVIC Version */
+#define IVB_offEVIC		13	/* External Vector Interrupt Controller mode */
+#define IVB_offESZ		14	/* Size of each vector entry */
+#define IVB_offIVBASE		16	/* BasePA of interrupt vector table */
+
+#define IVB_mskNIVIC		( 0x7  << IVB_offNIVIC )
+#define IVB_mskIVIC_VER		( 0x3  << IVB_offIVIC_VER )
+#define IVB_mskEVIC		( 0x1  << IVB_offEVIC )
+#define IVB_mskESZ		( 0x3  << IVB_offESZ )
+#define IVB_mskIVBASE		( 0xFFFF  << IVB_offIVBASE )
+
+#define IVB_valESZ4		0
+#define IVB_valESZ16		1
+#define IVB_valESZ64		2
+#define IVB_valESZ256		3
+/******************************************************************************
+ * ir4: EVA (Exception Virtual Address Register)
+ * ir5: P_EVA (Previous EVA Register)
+ *****************************************************************************/
+
+	/* This register contains the VA that causes the exception */
+
+/******************************************************************************
+ * ir6: ITYPE (Interruption Type Register)
+ * ir7: P_ITYPE (Previous ITYPE Register)
+ *****************************************************************************/
+#define ITYPE_offETYPE		0	/* Exception Type */
+#define ITYPE_offINST		4	/* Exception caused by insn fetch or data access */
+/* bit 5:15 reserved */
+#define ITYPE_offVECTOR		5	/* Vector */
+#define ITYPE_offSWID		16	/* SWID of debugging exception */
+/* bit 31:31 reserved */
+
+#define ITYPE_mskETYPE		( 0xF  << ITYPE_offETYPE )
+#define ITYPE_mskINST		( 0x1  << ITYPE_offINST )
+#define ITYPE_mskVECTOR		( 0x7F  << ITYPE_offVECTOR )
+#define ITYPE_mskSWID		( 0x7FFF  << ITYPE_offSWID )
+
+/* Additional definitions for ITYPE register */
+#define ITYPE_offSTYPE          16	/* Arithmetic Sub Type */
+#define ITYPE_offCPID           20	/* Co-Processor ID which generate the exception */
+
+#define ITYPE_mskSTYPE		( 0xF  << ITYPE_offSTYPE )
+#define ITYPE_mskCPID		( 0x3  << ITYPE_offCPID )
+
+/* Additional definitions of ITYPE register for FPU */
+#define FPU_DISABLE_EXCEPTION	(0x1  << ITYPE_offSTYPE)
+#define FPU_EXCEPTION		(0x2  << ITYPE_offSTYPE)
+#define FPU_CPID		0	/* FPU Co-Processor ID is 0 */
+
+#define NDS32_VECTOR_mskNONEXCEPTION	0x78
+#define NDS32_VECTOR_offEXCEPTION	8
+#define NDS32_VECTOR_offINTERRUPT	9
+
+/* Interrupt vector entry */
+#define ENTRY_RESET_NMI			0
+#define ENTRY_TLB_FILL			1
+#define ENTRY_PTE_NOT_PRESENT		2
+#define ENTRY_TLB_MISC			3
+#define ENTRY_TLB_VLPT_MISS		4
+#define ENTRY_MACHINE_ERROR		5
+#define ENTRY_DEBUG_RELATED		6
+#define ENTRY_GENERAL_EXCPETION		7
+#define ENTRY_SYSCALL			8
+
+/* PTE not present exception definition */
+#define ETYPE_NON_LEAF_PTE_NOT_PRESENT	0
+#define ETYPE_LEAF_PTE_NOT_PRESENT	1
+
+/* General exception ETYPE definition */
+#define ETYPE_ALIGNMENT_CHECK		0
+#define ETYPE_RESERVED_INSTRUCTION	1
+#define ETYPE_TRAP			2
+#define ETYPE_ARITHMETIC		3
+#define ETYPE_PRECISE_BUS_ERROR		4
+#define ETYPE_IMPRECISE_BUS_ERROR	5
+#define ETYPE_COPROCESSOR		6
+#define ETYPE_RESERVED_VALUE		7
+#define ETYPE_NONEXISTENT_MEM_ADDRESS	8
+#define ETYPE_MPZIU_CONTROL		9
+#define ETYPE_NEXT_PRECISE_STACK_OFL	10
+
+/* Kerenl reserves software ID */
+#define SWID_RAISE_INTERRUPT_LEVEL	0x1a	/* SWID_RAISE_INTERRUPT_LEVEL is used to
+						 * raise interrupt level for debug exception
+						 */
+
+/******************************************************************************
+ * ir8: MERR (Machine Error Log Register)
+ *****************************************************************************/
+/* bit 0:30 reserved */
+#define MERR_offBUSERR		31	/* Bus error caused by a load insn */
+
+#define MERR_mskBUSERR		( 0x1  << MERR_offBUSERR )
+
+/******************************************************************************
+ * ir9: IPC (Interruption Program Counter Register)
+ * ir10: P_IPC (Previous IPC Register)
+ * ir11: OIPC (Overflow Interruption Program Counter Register)
+ *****************************************************************************/
+
+	/* This is the shadow stack register of the Program Counter */
+
+/******************************************************************************
+ * ir12: P_P0 (Previous P0 Register)
+ * ir13: P_P1 (Previous P1 Register)
+ *****************************************************************************/
+
+	/* These are shadow registers of $p0 and $p1 */
+
+/******************************************************************************
+ * ir14: INT_MASK (Interruption Masking Register)
+ *****************************************************************************/
+#define INT_MASK_offH0IM	0	/* Hardware Interrupt 0 Mask bit */
+#define INT_MASK_offH1IM	1	/* Hardware Interrupt 1 Mask bit */
+#define INT_MASK_offH2IM	2	/* Hardware Interrupt 2 Mask bit */
+#define INT_MASK_offH3IM	3	/* Hardware Interrupt 3 Mask bit */
+#define INT_MASK_offH4IM	4	/* Hardware Interrupt 4 Mask bit */
+#define INT_MASK_offH5IM	5	/* Hardware Interrupt 5 Mask bit */
+/* bit 6:15 reserved */
+#define INT_MASK_offSIM		16	/* Software Interrupt Mask bit */
+/* bit 17:29 reserved */
+#define INT_MASK_offIDIVZE	30	/* Enable detection for Divide-By-Zero */
+#define INT_MASK_offDSSIM	31	/* Default Single Stepping Interruption Mask */
+
+#define INT_MASK_mskH0IM	( 0x1  << INT_MASK_offH0IM )
+#define INT_MASK_mskH1IM	( 0x1  << INT_MASK_offH1IM )
+#define INT_MASK_mskH2IM	( 0x1  << INT_MASK_offH2IM )
+#define INT_MASK_mskH3IM	( 0x1  << INT_MASK_offH3IM )
+#define INT_MASK_mskH4IM	( 0x1  << INT_MASK_offH4IM )
+#define INT_MASK_mskH5IM	( 0x1  << INT_MASK_offH5IM )
+#define INT_MASK_mskSIM		( 0x1  << INT_MASK_offSIM )
+#define INT_MASK_mskIDIVZE	( 0x1  << INT_MASK_offIDIVZE )
+#define INT_MASK_mskDSSIM	( 0x1  << INT_MASK_offDSSIM )
+
+#define INT_MASK_INITAIAL_VAL	(INT_MASK_mskDSSIM|INT_MASK_mskIDIVZE)
+
+/******************************************************************************
+ * ir15: INT_PEND (Interrupt Pending Register)
+ *****************************************************************************/
+#define INT_PEND_offH0I		0	/* Hardware Interrupt 0 pending bit */
+#define INT_PEND_offH1I		1	/* Hardware Interrupt 1 pending bit */
+#define INT_PEND_offH2I		2	/* Hardware Interrupt 2 pending bit */
+#define INT_PEND_offH3I		3	/* Hardware Interrupt 3 pending bit */
+#define INT_PEND_offH4I		4	/* Hardware Interrupt 4 pending bit */
+#define INT_PEND_offH5I		5	/* Hardware Interrupt 5 pending bit */
+
+#define INT_PEND_offCIPL	0	/* Current Interrupt Priority Level */
+
+/* bit 6:15 reserved */
+#define INT_PEND_offSWI		16	/* Software Interrupt pending bit */
+/* bit 17:31 reserved */
+
+#define INT_PEND_mskH0I		( 0x1  << INT_PEND_offH0I )
+#define INT_PEND_mskH1I		( 0x1  << INT_PEND_offH1I )
+#define INT_PEND_mskH2I		( 0x1  << INT_PEND_offH2I )
+#define INT_PEND_mskH3I		( 0x1  << INT_PEND_offH3I )
+#define INT_PEND_mskH4I		( 0x1  << INT_PEND_offH4I )
+#define INT_PEND_mskH5I		( 0x1  << INT_PEND_offH5I )
+#define INT_PEND_mskCIPL	( 0x1  << INT_PEND_offCIPL )
+#define INT_PEND_mskSWI		( 0x1  << INT_PEND_offSWI )
+
+/******************************************************************************
+ * mr0: MMU_CTL (MMU Control Register)
+ *****************************************************************************/
+#define MMU_CTL_offD		0	/* Default minimum page size */
+#define MMU_CTL_offNTC0		1	/* Non-Translated Cachebility of partition 0 */
+#define MMU_CTL_offNTC1		3	/* Non-Translated Cachebility of partition 1 */
+#define MMU_CTL_offNTC2		5	/* Non-Translated Cachebility of partition 2 */
+#define MMU_CTL_offNTC3		7	/* Non-Translated Cachebility of partition 3 */
+#define MMU_CTL_offTBALCK	9	/* TLB all-lock resolution scheme */
+#define MMU_CTL_offMPZIU	10	/* Multiple Page Size In Use bit */
+#define MMU_CTL_offNTM0		11	/* Non-Translated VA to PA of partition 0 */
+#define MMU_CTL_offNTM1		13	/* Non-Translated VA to PA of partition 1 */
+#define MMU_CTL_offNTM2		15	/* Non-Translated VA to PA of partition 2 */
+#define MMU_CTL_offNTM3		17	/* Non-Translated VA to PA of partition 3 */
+#define MMU_CTL_offUNA		23	/* Unaligned access */
+/* bit 24:31 reserved */
+
+#define MMU_CTL_mskD		( 0x1  << MMU_CTL_offD )
+#define MMU_CTL_mskNTC0		( 0x3  << MMU_CTL_offNTC0 )
+#define MMU_CTL_mskNTC1		( 0x3  << MMU_CTL_offNTC1 )
+#define MMU_CTL_mskNTC2		( 0x3  << MMU_CTL_offNTC2 )
+#define MMU_CTL_mskNTC3		( 0x3  << MMU_CTL_offNTC3 )
+#define MMU_CTL_mskTBALCK	( 0x1  << MMU_CTL_offTBALCK )
+#define MMU_CTL_mskMPZIU	( 0x1  << MMU_CTL_offMPZIU )
+#define MMU_CTL_mskNTM0		( 0x3  << MMU_CTL_offNTM0 )
+#define MMU_CTL_mskNTM1         ( 0x3  << MMU_CTL_offNTM1 )
+#define MMU_CTL_mskNTM2         ( 0x3  << MMU_CTL_offNTM2 )
+#define MMU_CTL_mskNTM3         ( 0x3  << MMU_CTL_offNTM3 )
+
+#define MMU_CTL_D4KB		0
+#define MMU_CTL_D8KB		1
+#define MMU_CTL_UNA		( 0x1  << MMU_CTL_offUNA )
+
+#define MMU_CTL_CACHEABLE_NON   0
+#define MMU_CTL_CACHEABLE_WB	2
+#define MMU_CTL_CACHEABLE_WT	3
+
+/******************************************************************************
+ * mr1: L1_PPTB (L1 Physical Page Table Base Register)
+ *****************************************************************************/
+#define L1_PPTB_offNV		0	/* Enable Hardware Page Table Walker (HPTWK) */
+/* bit 1:11 reserved */
+#define L1_PPTB_offBASE		12	/* First level physical page table base address */
+
+#define L1_PPTB_mskNV		( 0x1  << L1_PPTB_offNV )
+#define L1_PPTB_mskBASE		( 0xFFFFF  << L1_PPTB_offBASE )
+
+/******************************************************************************
+ * mr2: TLB_VPN (TLB Access VPN Register)
+ *****************************************************************************/
+/* bit 0:11 reserved */
+#define TLB_VPN_offVPN		12	/* Virtual Page Number */
+
+#define TLB_VPN_mskVPN		( 0xFFFFF  << TLB_VPN_offVPN )
+
+/******************************************************************************
+ * mr3: TLB_DATA (TLB Access Data Register)
+ *****************************************************************************/
+#define TLB_DATA_offV		0	/* PTE is valid and present */
+#define TLB_DATA_offM		1	/* Page read/write access privilege */
+#define TLB_DATA_offD		4	/* Dirty bit */
+#define TLB_DATA_offX		5	/* Executable bit */
+#define TLB_DATA_offA		6	/* Access bit */
+#define TLB_DATA_offG		7	/* Global page (shared across contexts) */
+#define TLB_DATA_offC		8	/* Cacheability atribute */
+/* bit 11:11 reserved */
+#define TLB_DATA_offPPN		12	/* Phisical Page Number */
+
+#define TLB_DATA_mskV		( 0x1  << TLB_DATA_offV )
+#define TLB_DATA_mskM		( 0x7  << TLB_DATA_offM )
+#define TLB_DATA_mskD		( 0x1  << TLB_DATA_offD )
+#define TLB_DATA_mskX		( 0x1  << TLB_DATA_offX )
+#define TLB_DATA_mskA		( 0x1  << TLB_DATA_offA )
+#define TLB_DATA_mskG		( 0x1  << TLB_DATA_offG )
+#define TLB_DATA_mskC		( 0x7  << TLB_DATA_offC )
+#define TLB_DATA_mskPPN		( 0xFFFFF  << TLB_DATA_offPPN )
+
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+#define TLB_DATA_kernel_text_attr	(TLB_DATA_mskV|TLB_DATA_mskM|TLB_DATA_mskD|TLB_DATA_mskX|TLB_DATA_mskG|TLB_DATA_mskC)
+#else
+#define TLB_DATA_kernel_text_attr	(TLB_DATA_mskV|TLB_DATA_mskM|TLB_DATA_mskD|TLB_DATA_mskX|TLB_DATA_mskG|(0x6 << TLB_DATA_offC))
+#endif
+
+/******************************************************************************
+ * mr4: TLB_MISC (TLB Access Misc Register)
+ *****************************************************************************/
+#define TLB_MISC_offACC_PSZ	0	/* Page size of a PTE entry */
+#define TLB_MISC_offCID		4	/* Context id */
+/* bit 13:31 reserved */
+
+#define TLB_MISC_mskACC_PSZ    ( 0xF  << TLB_MISC_offACC_PSZ )
+#define TLB_MISC_mskCID        ( 0x1FF  << TLB_MISC_offCID )
+
+/******************************************************************************
+ * mr5: VLPT_IDX (Virtual Linear Page Table Index Register)
+ *****************************************************************************/
+#define VLPT_IDX_offZERO	0	/* Always 0 */
+#define VLPT_IDX_offEVPN	2	/* Exception Virtual Page Number */
+#define VLPT_IDX_offVLPTB	22	/* Base VA of VLPT */
+
+#define VLPT_IDX_mskZERO	( 0x3  << VLPT_IDX_offZERO )
+#define VLPT_IDX_mskEVPN	( 0xFFFFF  << VLPT_IDX_offEVPN )
+#define VLPT_IDX_mskVLPTB	( 0x3FF  << VLPT_IDX_offVLPTB )
+
+/******************************************************************************
+ * mr6: ILMB (Instruction Local Memory Base Register)
+ *****************************************************************************/
+#define ILMB_offIEN		0	/* Enable ILM */
+#define ILMB_offILMSZ		1	/* Size of ILM */
+/* bit 5:19 reserved */
+#define ILMB_offIBPA		20	/* Base PA of ILM */
+
+#define ILMB_mskIEN		( 0x1  << ILMB_offIEN )
+#define ILMB_mskILMSZ		( 0xF  << ILMB_offILMSZ )
+#define ILMB_mskIBPA		( 0xFFF  << ILMB_offIBPA )
+
+/******************************************************************************
+ * mr7: DLMB (Data Local Memory Base Register)
+ *****************************************************************************/
+#define DLMB_offDEN		0	/* Enable DLM */
+#define DLMB_offDLMSZ		1	/* Size of DLM */
+#define DLMB_offDBM		5	/* Enable Double-Buffer Mode for DLM */
+#define DLMB_offDBB		6	/* Double-buffer bank which can be accessed by the processor */
+/* bit 7:19 reserved */
+#define DLMB_offDBPA		20	/* Base PA of DLM */
+
+#define DLMB_mskDEN		( 0x1  << DLMB_offDEN )
+#define DLMB_mskDLMSZ		( 0xF  << DLMB_offDLMSZ )
+#define DLMB_mskDBM		( 0x1  << DLMB_offDBM )
+#define DLMB_mskDBB		( 0x1  << DLMB_offDBB )
+#define DLMB_mskDBPA		( 0xFFF  << DLMB_offDBPA )
+
+/******************************************************************************
+ * mr8: CACHE_CTL (Cache Control Register)
+ *****************************************************************************/
+#define CACHE_CTL_offIC_EN	0	/* Enable I-cache */
+#define CACHE_CTL_offDC_EN	1	/* Enable D-cache */
+#define CACHE_CTL_offICALCK	2	/* I-cache all-lock resolution scheme */
+#define CACHE_CTL_offDCALCK	3	/* D-cache all-lock resolution scheme */
+#define CACHE_CTL_offDCCWF	4	/* Enable D-cache Critical Word Forwarding */
+#define CACHE_CTL_offDCPMW	5	/* Enable D-cache concurrent miss and write-back processing */
+/* bit 6:31 reserved */
+
+#define CACHE_CTL_mskIC_EN	( 0x1  << CACHE_CTL_offIC_EN )
+#define CACHE_CTL_mskDC_EN	( 0x1  << CACHE_CTL_offDC_EN )
+#define CACHE_CTL_mskICALCK	( 0x1  << CACHE_CTL_offICALCK )
+#define CACHE_CTL_mskDCALCK	( 0x1  << CACHE_CTL_offDCALCK )
+#define CACHE_CTL_mskDCCWF	( 0x1  << CACHE_CTL_offDCCWF )
+#define CACHE_CTL_mskDCPMW	( 0x1  << CACHE_CTL_offDCPMW )
+
+/******************************************************************************
+ * mr9: HSMP_SADDR (High Speed Memory Port Starting Address)
+ *****************************************************************************/
+#define HSMP_SADDR_offEN	0	/* Enable control bit for the High Speed Memory port */
+/* bit 1:19 reserved */
+
+#define HSMP_SADDR_offRANGE	1	/* Denote the address range (only defined in HSMP v2 ) */
+#define HSMP_SADDR_offSADDR	20	/* Starting base PA of the High Speed Memory Port region */
+
+#define HSMP_SADDR_mskEN	( 0x1  << HSMP_SADDR_offEN )
+#define HSMP_SADDR_mskRANGE	( 0xFFF  << HSMP_SADDR_offRANGE )
+#define HSMP_SADDR_mskSADDR	( 0xFFF  << HSMP_SADDR_offSADDR )
+
+/******************************************************************************
+ * mr10: HSMP_EADDR (High Speed Memory Port Ending Address)
+ *****************************************************************************/
+/* bit 0:19 reserved */
+#define HSMP_EADDR_offEADDR	20
+
+#define HSMP_EADDR_mskEADDR	( 0xFFF  << HSMP_EADDR_offEADDR )
+
+/******************************************************************************
+ * dr0+(n*5): BPCn (n=0-7) (Breakpoint Control Register)
+ *****************************************************************************/
+#define BPC_offWP		0	/* Configuration of BPAn */
+#define BPC_offEL		1	/* Enable BPAn */
+#define BPC_offS		2	/* Data address comparison for a store instruction */
+#define BPC_offP		3	/* Compared data address is PA */
+#define BPC_offC		4	/* CID value is compared with the BPCIDn register */
+#define BPC_offBE0		5	/* Enable byte mask for the comparison with register */
+#define BPC_offBE1		6	/* Enable byte mask for the comparison with register */
+#define BPC_offBE2		7	/* Enable byte mask for the comparison with register */
+#define BPC_offBE3		8	/* Enable byte mask for the comparison with register */
+#define BPC_offT		9	/* Enable breakpoint Embedded Tracer triggering operation */
+
+#define BPC_mskWP		( 0x1  << BPC_offWP )
+#define BPC_mskEL		( 0x1  << BPC_offEL )
+#define BPC_mskS		( 0x1  << BPC_offS )
+#define BPC_mskP		( 0x1  << BPC_offP )
+#define BPC_mskC		( 0x1  << BPC_offC )
+#define BPC_mskBE0		( 0x1  << BPC_offBE0 )
+#define BPC_mskBE1		( 0x1  << BPC_offBE1 )
+#define BPC_mskBE2		( 0x1  << BPC_offBE2 )
+#define BPC_mskBE3		( 0x1  << BPC_offBE3 )
+#define BPC_mskT		( 0x1  << BPC_offT )
+
+/******************************************************************************
+ * dr1+(n*5): BPAn (n=0-7) (Breakpoint Address Register)
+ *****************************************************************************/
+
+	/* These registers contain break point address */
+
+/******************************************************************************
+ * dr2+(n*5): BPAMn (n=0-7) (Breakpoint Address Mask Register)
+ *****************************************************************************/
+
+	/* These registerd contain the address comparison mask for the BPAn register */
+
+/******************************************************************************
+ * dr3+(n*5): BPVn (n=0-7) Breakpoint Data Value Register
+ *****************************************************************************/
+
+	/* The BPVn register contains the data value that will be compared with the
+	 * incoming load/store data value */
+
+/******************************************************************************
+ * dr4+(n*5): BPCIDn (n=0-7) (Breakpoint Context ID Register)
+ *****************************************************************************/
+#define BPCID_offCID		0	/* CID that will be compared with a process's CID */
+/* bit 9:31 reserved */
+
+#define BPCID_mskCID		( 0x1FF  << BPCID_offCID )
+
+/******************************************************************************
+ * dr40: EDM_CFG (EDM Configuration Register)
+ *****************************************************************************/
+#define EDM_CFG_offBC		0	/* Number of hardware breakpoint sets implemented */
+#define EDM_CFG_offDIMU		3	/* Debug Instruction Memory Unit exists */
+/* bit 4:15 reserved */
+#define EDM_CFG_offVER		16	/* EDM version */
+
+#define EDM_CFG_mskBC		( 0x7  << EDM_CFG_offBC )
+#define EDM_CFG_mskDIMU		( 0x1  << EDM_CFG_offDIMU )
+#define EDM_CFG_mskVER		( 0xFFFF  << EDM_CFG_offVER )
+
+/******************************************************************************
+ * dr41: EDMSW (EDM Status Word)
+ *****************************************************************************/
+#define EDMSW_offWV		0	/* Write Valid */
+#define EDMSW_offRV		1	/* Read Valid */
+#define EDMSW_offDE		2	/* Debug exception has occurred for this core */
+/* bit 3:31 reserved */
+
+#define EDMSW_mskWV		( 0x1  << EDMSW_offWV )
+#define EDMSW_mskRV		( 0x1  << EDMSW_offRV )
+#define EDMSW_mskDE		( 0x1  << EDMSW_offDE )
+
+/******************************************************************************
+ * dr42: EDM_CTL (EDM Control Register)
+ *****************************************************************************/
+/* bit 0:30 reserved */
+#define EDM_CTL_offV3_EDM_MODE	6	/* EDM compatibility control bit */
+#define EDM_CTL_offDEH_SEL	31	/* Controls where debug exception is directed to */
+
+#define EDM_CTL_mskV3_EDM_MODE	( 0x1 << EDM_CTL_offV3_EDM_MODE )
+#define EDM_CTL_mskDEH_SEL	( 0x1 << EDM_CTL_offDEH_SEL )
+
+/******************************************************************************
+ * dr43: EDM_DTR (EDM Data Transfer Register)
+ *****************************************************************************/
+
+	/* This is used to exchange data between the embedded EDM logic
+	 * and the processor core */
+
+/******************************************************************************
+ * dr44: BPMTC (Breakpoint Match Trigger Counter Register)
+ *****************************************************************************/
+#define BPMTC_offBPMTC		0	/* Breakpoint match trigger counter value */
+/* bit 16:31 reserved */
+
+#define BPMTC_mskBPMTC		( 0xFFFF  << BPMTC_offBPMTC )
+
+/******************************************************************************
+ * dr45: DIMBR (Debug Instruction Memory Base Register)
+ *****************************************************************************/
+/* bit 0:11 reserved */
+#define DIMBR_offDIMB		12	/* Base address of the Debug Instruction Memory (DIM) */
+#define DIMBR_mskDIMB		( 0xFFFFF  << DIMBR_offDIMB )
+
+/******************************************************************************
+ * dr46: TECR0(Trigger Event Control register 0)
+ * dr47: TECR1 (Trigger Event Control register 1)
+ *****************************************************************************/
+#define TECR_offBP		0	/* Controld which BP is used as a trigger source */
+#define TECR_offNMI		8	/* Use NMI as a trigger source */
+#define TECR_offHWINT		9	/* Corresponding interrupt is used as a trigger source */
+#define TECR_offEVIC		15	/* Enable HWINT as a trigger source in EVIC mode */
+#define TECR_offSYS		16	/* Enable SYSCALL instruction as a trigger source */
+#define TECR_offDBG		17	/* Enable debug exception as a trigger source */
+#define TECR_offMRE		18	/* Enable MMU related exception as a trigger source */
+#define TECR_offE		19	/* An exception is used as a trigger source */
+/* bit 20:30 reserved */
+#define TECR_offL		31	/* Link/Cascade TECR0 trigger event to TECR1 trigger event */
+
+#define TECR_mskBP		( 0xFF  << TECR_offBP )
+#define TECR_mskNMI		( 0x1  << TECR_offBNMI )
+#define TECR_mskHWINT		( 0x3F  << TECR_offBHWINT )
+#define TECR_mskEVIC		( 0x1  << TECR_offBEVIC )
+#define TECR_mskSYS		( 0x1  << TECR_offBSYS )
+#define TECR_mskDBG		( 0x1  << TECR_offBDBG )
+#define TECR_mskMRE		( 0x1  << TECR_offBMRE )
+#define TECR_mskE		( 0x1  << TECR_offE )
+#define TECR_mskL		( 0x1  << TECR_offL )
+
+/******************************************************************************
+ * pfr0-2: PFMC0-2 (Performance Counter Register 0-2)
+ *****************************************************************************/
+
+	/* These registers contains performance event count */
+
+/******************************************************************************
+ * pfr3: PFM_CTL (Performance Counter Control Register)
+ *****************************************************************************/
+#define PFM_CTL_offEN0		0	/* Enable PFMC0 */
+#define PFM_CTL_offEN1		1	/* Enable PFMC1 */
+#define PFM_CTL_offEN2		2	/* Enable PFMC2 */
+#define PFM_CTL_offIE0		3	/* Enable interrupt for PFMC0 */
+#define PFM_CTL_offIE1		4	/* Enable interrupt for PFMC1 */
+#define PFM_CTL_offIE2		5	/* Enable interrupt for PFMC2 */
+#define PFM_CTL_offOVF0		6	/* Overflow bit of PFMC0 */
+#define PFM_CTL_offOVF1		7	/* Overflow bit of PFMC1 */
+#define PFM_CTL_offOVF2		8	/* Overflow bit of PFMC2 */
+#define PFM_CTL_offKS0		9	/* Enable superuser mode event counting for PFMC0 */
+#define PFM_CTL_offKS1		10	/* Enable superuser mode event counting for PFMC1 */
+#define PFM_CTL_offKS2		11	/* Enable superuser mode event counting for PFMC2 */
+#define PFM_CTL_offKU0		12	/* Enable user mode event counting for PFMC0 */
+#define PFM_CTL_offKU1		13	/* Enable user mode event counting for PFMC1 */
+#define PFM_CTL_offKU2		14	/* Enable user mode event counting for PFMC2 */
+#define PFM_CTL_offSEL0		15	/* The event selection for PFMC0 */
+#define PFM_CTL_offSEL1		16	/* The event selection for PFMC1 */
+#define PFM_CTL_offSEL2		22	/* The event selection for PFMC2 */
+/* bit 28:31 reserved */
+
+#define PFM_CTL_mskEN0		( 0x01  << PFM_CTL_offEN0 )
+#define PFM_CTL_mskEN1		( 0x01  << PFM_CTL_offEN1 )
+#define PFM_CTL_mskEN2		( 0x01  << PFM_CTL_offEN2 )
+#define PFM_CTL_mskIE0		( 0x01  << PFM_CTL_offIE0 )
+#define PFM_CTL_mskIE1		( 0x01  << PFM_CTL_offIE1 )
+#define PFM_CTL_mskIE2		( 0x01  << PFM_CTL_offIE2 )
+#define PFM_CTL_mskOVF0		( 0x01  << PFM_CTL_offOVF0 )
+#define PFM_CTL_mskOVF1		( 0x01  << PFM_CTL_offOVF1 )
+#define PFM_CTL_mskOVF2		( 0x01  << PFM_CTL_offOVF2 )
+#define PFM_CTL_mskKS0		( 0x01  << PFM_CTL_offKS0 )
+#define PFM_CTL_mskKS1		( 0x01  << PFM_CTL_offKS1 )
+#define PFM_CTL_mskKS2		( 0x01  << PFM_CTL_offKS2 )
+#define PFM_CTL_mskKU0		( 0x01  << PFM_CTL_offKU0 )
+#define PFM_CTL_mskKU1		( 0x01  << PFM_CTL_offKU1 )
+#define PFM_CTL_mskKU2		( 0x01  << PFM_CTL_offKU2 )
+#define PFM_CTL_mskSEL0		( 0x01  << PFM_CTL_offSEL0 )
+#define PFM_CTL_mskSEL1		( 0x3F  << PFM_CTL_offSEL1 )
+#define PFM_CTL_mskSEL2		( 0x3F  << PFM_CTL_offSEL2 )
+
+/******************************************************************************
+ * SDZ_CTL (Structure Downsizing Control Register)
+ *****************************************************************************/
+#define SDZ_CTL_offICDZ		0	/* I-cache downsizing control */
+#define SDZ_CTL_offDCDZ		3	/* D-cache downsizing control */
+#define SDZ_CTL_offMTBDZ	6	/* MTLB downsizing control */
+#define SDZ_CTL_offBTBDZ	9	/* Branch Target Table downsizing control */
+/* bit 12:31 reserved */
+#define SDZ_CTL_mskICDZ		( 0x07  << SDZ_CTL_offICDZ )
+#define SDZ_CTL_mskDCDZ		( 0x07  << SDZ_CTL_offDCDZ )
+#define SDZ_CTL_mskMTBDZ	( 0x07  << SDZ_CTL_offMTBDZ )
+#define SDZ_CTL_mskBTBDZ	( 0x07  << SDZ_CTL_offBTBDZ )
+
+/******************************************************************************
+ * N13MISC_CTL (N13 Miscellaneous Control Register)
+ *****************************************************************************/
+#define N13MISC_CTL_offBTB	0	/* Disable Branch Target Buffer */
+#define N13MISC_CTL_offRTP	1	/* Disable Return Target Predictor */
+#define N13MISC_CTL_offPTEPF	2	/* Disable HPTWK L2 PTE pefetch */
+#define N13MISC_CTL_offSP_SHADOW_EN	4	/* Enable shadow stack pointers */
+#define MISC_CTL_offHWPRE      11      /* Enable HardWare PREFETCH */
+/* bit 6, 9:31 reserved */
+
+#define N13MISC_CTL_makBTB	( 0x1  << N13MISC_CTL_offBTB )
+#define N13MISC_CTL_makRTP	( 0x1  << N13MISC_CTL_offRTP )
+#define N13MISC_CTL_makPTEPF	( 0x1  << N13MISC_CTL_offPTEPF )
+#define N13MISC_CTL_makSP_SHADOW_EN	( 0x1  << N13MISC_CTL_offSP_SHADOW_EN )
+#define MISC_CTL_makHWPRE_EN     ( 0x1  << MISC_CTL_offHWPRE )
+
+#ifdef CONFIG_HW_PRE
+#define MISC_init	(N13MISC_CTL_makBTB|N13MISC_CTL_makRTP|N13MISC_CTL_makSP_SHADOW_EN|MISC_CTL_makHWPRE_EN)
+#else
+#define MISC_init	(N13MISC_CTL_makBTB|N13MISC_CTL_makRTP|N13MISC_CTL_makSP_SHADOW_EN)
+#endif
+
+/******************************************************************************
+ * PRUSR_ACC_CTL (Privileged Resource User Access Control Registers)
+ *****************************************************************************/
+#define PRUSR_ACC_CTL_offDMA_EN	0	/* Allow user mode access of DMA registers */
+#define PRUSR_ACC_CTL_offPFM_EN	1	/* Allow user mode access of PFM registers */
+
+#define PRUSR_ACC_CTL_mskDMA_EN	( 0x1  << PRUSR_ACC_CTL_offDMA_EN )
+#define PRUSR_ACC_CTL_mskPFM_EN	( 0x1  << PRUSR_ACC_CTL_offPFM_EN )
+
+/******************************************************************************
+ * dmar0: DMA_CFG (DMA Configuration Register)
+ *****************************************************************************/
+#define DMA_CFG_offNCHN		0	/* The number of DMA channels implemented */
+#define DMA_CFG_offUNEA		2	/* Un-aligned External Address transfer feature */
+#define DMA_CFG_off2DET		3	/* 2-D Element Transfer feature */
+/* bit 4:15 reserved */
+#define DMA_CFG_offVER		16	/* DMA architecture and implementation version */
+
+#define DMA_CFG_mskNCHN		( 0x3  << DMA_CFG_offNCHN )
+#define DMA_CFG_mskUNEA		( 0x1  << DMA_CFG_offUNEA )
+#define DMA_CFG_msk2DET		( 0x1  << DMA_CFG_off2DET )
+#define DMA_CFG_mskVER		( 0xFFFF  << DMA_CFG_offVER )
+
+/******************************************************************************
+ * dmar1: DMA_GCSW (DMA Global Control and Status Word Register)
+ *****************************************************************************/
+#define DMA_GCSW_offC0STAT	0	/* DMA channel 0 state */
+#define DMA_GCSW_offC1STAT	3	/* DMA channel 1 state */
+/* bit 6:11 reserved */
+#define DMA_GCSW_offC0INT	12	/* DMA channel 0 generate interrupt */
+#define DMA_GCSW_offC1INT	13	/* DMA channel 1 generate interrupt */
+/* bit 14:30 reserved */
+#define DMA_GCSW_offEN		31	/* Enable DMA engine */
+
+#define DMA_GCSW_mskC0STAT	( 0x7  << DMA_GCSW_offC0STAT )
+#define DMA_GCSW_mskC1STAT	( 0x7  << DMA_GCSW_offC1STAT )
+#define DMA_GCSW_mskC0INT	( 0x1  << DMA_GCSW_offC0INT )
+#define DMA_GCSW_mskC1INT	( 0x1  << DMA_GCSW_offC1INT )
+#define DMA_GCSW_mskEN		( 0x1  << DMA_GCSW_offEN )
+
+/******************************************************************************
+ * dmar2: DMA_CHNSEL (DMA Channel Selection Register)
+ *****************************************************************************/
+#define DMA_CHNSEL_offCHAN	0	/* Selected channel number */
+/* bit 2:31 reserved */
+
+#define DMA_CHNSEL_mskCHAN	( 0x3  << DMA_CHNSEL_offCHAN )
+
+/******************************************************************************
+ * dmar3: DMA_ACT (DMA Action Register)
+ *****************************************************************************/
+#define DMA_ACT_offACMD		0	/* DMA Action Command */
+/* bit 2:31 reserved */
+#define DMA_ACT_mskACMD		( 0x3  << DMA_ACT_offACMD )
+
+/******************************************************************************
+ * dmar4: DMA_SETUP (DMA Setup Register)
+ *****************************************************************************/
+#define DMA_SETUP_offLM		0	/* Local Memory Selection */
+#define DMA_SETUP_offTDIR	1	/* Transfer Direction */
+#define DMA_SETUP_offTES	2	/* Transfer Element Size */
+#define DMA_SETUP_offESTR	4	/* External memory transfer Stride */
+#define DMA_SETUP_offCIE	16	/* Interrupt Enable on Completion */
+#define DMA_SETUP_offSIE	17	/* Interrupt Enable on explicit Stop */
+#define DMA_SETUP_offEIE	18	/* Interrupt Enable on Error */
+#define DMA_SETUP_offUE		19	/* Enable the Un-aligned External Address */
+#define DMA_SETUP_off2DE	20	/* Enable the 2-D External Transfer */
+#define DMA_SETUP_offCOA	21	/* Transfer Coalescable */
+/* bit 22:31 reserved */
+
+#define DMA_SETUP_mskLM		( 0x1  << DMA_SETUP_offLM )
+#define DMA_SETUP_mskTDIR	( 0x1  << DMA_SETUP_offTDIR )
+#define DMA_SETUP_mskTES	( 0x3  << DMA_SETUP_offTES )
+#define DMA_SETUP_mskESTR	( 0xFFF  << DMA_SETUP_offESTR )
+#define DMA_SETUP_mskCIE	( 0x1  << DMA_SETUP_offCIE )
+#define DMA_SETUP_mskSIE	( 0x1  << DMA_SETUP_offSIE )
+#define DMA_SETUP_mskEIE	( 0x1  << DMA_SETUP_offEIE )
+#define DMA_SETUP_mskUE		( 0x1  << DMA_SETUP_offUE )
+#define DMA_SETUP_msk2DE	( 0x1  << DMA_SETUP_off2DE )
+#define DMA_SETUP_mskCOA	( 0x1  << DMA_SETUP_offCOA )
+
+/******************************************************************************
+ * dmar5: DMA_ISADDR (DMA Internal Start Address Register)
+ *****************************************************************************/
+#define DMA_ISADDR_offISADDR	0	/* Internal Start Address */
+/* bit 20:31 reserved */
+#define DMA_ISADDR_mskISADDR	( 0xFFFFF  << DMA_ISADDR_offISADDR )
+
+/******************************************************************************
+ * dmar6: DMA_ESADDR (DMA External Start Address Register)
+ *****************************************************************************/
+/* This register holds External Start Address */
+
+/******************************************************************************
+ * dmar7: DMA_TCNT (DMA Transfer Element Count Register)
+ *****************************************************************************/
+#define DMA_TCNT_offTCNT	0	/* DMA transfer element count */
+/* bit 18:31 reserved */
+#define DMA_TCNT_mskTCNT	( 0x3FFFF  << DMA_TCNT_offTCNT )
+
+/******************************************************************************
+ * dmar8: DMA_STATUS (DMA Status Register)
+ *****************************************************************************/
+#define DMA_STATUS_offSTAT	0	/* DMA channel state */
+#define DMA_STATUS_offSTUNA	3	/* Un-aligned error on External Stride value */
+#define DMA_STATUS_offDERR	4	/* DMA Transfer Disruption Error */
+#define DMA_STATUS_offEUNA	5	/* Un-aligned error on the External address */
+#define DMA_STATUS_offIUNA	6	/* Un-aligned error on the Internal address */
+#define DMA_STATUS_offIOOR	7	/* Out-Of-Range error on the Internal address */
+#define DMA_STATUS_offEBUS	8	/* Bus Error on an External DMA transfer */
+#define DMA_STATUS_offESUP	9	/* DMA setup error */
+/* bit 10:31 reserved */
+
+#define DMA_STATUS_mskSTAT	( 0x7  << DMA_STATUS_offSTAT )
+#define DMA_STATUS_mskSTUNA	( 0x1  << DMDMA_STATUS_offSTUNA )
+#define DMA_STATUS_mskDERR	( 0x1  << DMDMA_STATUS_offDERR )
+#define DMA_STATUS_mskEUNA	( 0x1  << DMDMA_STATUS_offEUNA )
+#define DMA_STATUS_mskIUNA	( 0x1  << DMDMA_STATUS_offIUNA )
+#define DMA_STATUS_mskIOOR	( 0x1  << DMDMA_STATUS_offIOOR )
+#define DMA_STATUS_mskEBUS	( 0x1  << DMDMA_STATUS_offEBUS )
+#define DMA_STATUS_mskESUP	( 0x1  << DMDMA_STATUS_offESUP )
+
+/******************************************************************************
+ * dmar9: DMA_2DSET (DMA 2D Setup Register)
+ *****************************************************************************/
+#define DMA_2DSET_offWECNT	0	/* The Width Element Count for a 2-D region */
+#define DMA_2DSET_offHTSTR	16	/* The Height Stride for a 2-D region */
+
+#define DMA_2DSET_mskHTSTR	( 0xFFFF  << DMA_2DSET_offHTSTR )
+#define DMA_2DSET_mskWECNT	( 0xFFFF  << DMA_2DSET_offWECNT )
+
+/******************************************************************************
+ * dmar10: DMA_2DSCTL (DMA 2D Startup Control Register)
+ *****************************************************************************/
+#define DMA_2DSCTL_offSTWECNT	0	/* Startup Width Element Count for a 2-D region */
+/* bit 16:31 reserved */
+
+#define DMA_2DSCTL_mskSTWECNT	( 0xFFFF  << DMA_2DSCTL_offSTWECNT )
+
+/******************************************************************************
+ * fpcsr: FPCSR (Floating-Point Control Status Register)
+ *****************************************************************************/
+#define FPCSR_offRM		0
+#define FPCSR_offIVO		2
+#define FPCSR_offDBZ		3
+#define FPCSR_offOVF		4
+#define FPCSR_offUDF		5
+#define FPCSR_offIEX		6
+#define FPCSR_offIVOE		7
+#define FPCSR_offDBZE		8
+#define FPCSR_offOVFE		9
+#define FPCSR_offUDFE		10
+#define FPCSR_offIEXE		11
+#define FPCSR_offDNZ		12
+#define FPCSR_offIVOT		13
+#define FPCSR_offDBZT		14
+#define FPCSR_offOVFT		15
+#define FPCSR_offUDFT		16
+#define FPCSR_offIEXT		17
+#define FPCSR_offDNIT		18
+#define FPCSR_offRIT		19
+
+#define FPCSR_mskRM             ( 0x3  << FPCSR_offRM )
+#define FPCSR_mskIVO            ( 0x1  << FPCSR_offIVO )
+#define FPCSR_mskDBZ            ( 0x1  << FPCSR_offDBZ )
+#define FPCSR_mskOVF            ( 0x1  << FPCSR_offOVF )
+#define FPCSR_mskUDF            ( 0x1  << FPCSR_offUDF )
+#define FPCSR_mskIEX            ( 0x1  << FPCSR_offIEX )
+#define FPCSR_mskIVOE           ( 0x1  << FPCSR_offIVOE )
+#define FPCSR_mskDBZE           ( 0x1  << FPCSR_offDBZE )
+#define FPCSR_mskOVFE           ( 0x1  << FPCSR_offOVFE )
+#define FPCSR_mskUDFE           ( 0x1  << FPCSR_offUDFE )
+#define FPCSR_mskIEXE           ( 0x1  << FPCSR_offIEXE )
+#define FPCSR_mskDNZ            ( 0x1  << FPCSR_offDNZ )
+#define FPCSR_mskIVOT           ( 0x1  << FPCSR_offIVOT )
+#define FPCSR_mskDBZT           ( 0x1  << FPCSR_offDBZT )
+#define FPCSR_mskOVFT           ( 0x1  << FPCSR_offOVFT )
+#define FPCSR_mskUDFT           ( 0x1  << FPCSR_offUDFT )
+#define FPCSR_mskIEXT           ( 0x1  << FPCSR_offIEXT )
+#define FPCSR_mskDNIT           ( 0x1  << FPCSR_offDNIT )
+#define FPCSR_mskRIT		( 0x1  << FPCSR_offRIT )
+#define FPCSR_mskALL		(FPCSR_mskIVO | FPCSR_mskDBZ | FPCSR_mskOVF | FPCSR_mskUDF | FPCSR_mskIEX)
+#define FPCSR_mskALLE_NO_UDF_IEXE (FPCSR_mskIVOE | FPCSR_mskDBZE | FPCSR_mskOVFE)
+#define FPCSR_mskALLE		(FPCSR_mskIVOE | FPCSR_mskDBZE | FPCSR_mskOVFE | FPCSR_mskUDFE | FPCSR_mskIEXE)
+#define FPCSR_mskALLT           (FPCSR_mskIVOT | FPCSR_mskDBZT | FPCSR_mskOVFT | FPCSR_mskUDFT | FPCSR_mskIEXT |FPCSR_mskDNIT | FPCSR_mskRIT)
+
+/******************************************************************************
+ * fpcfg: FPCFG (Floating-Point Configuration Register)
+ *****************************************************************************/
+#define	FPCFG_offSP		0
+#define FPCFG_offDP		1
+#define FPCFG_offFREG		2
+#define FPCFG_offFMA		4
+#define FPCFG_offIMVER		22
+#define FPCFG_offAVER		27
+
+#define FPCFG_mskSP		( 0x1  << FPCFG_offSP )
+#define FPCFG_mskDP		( 0x1  << FPCFG_offDP )
+#define FPCFG_mskFREG		( 0x3  << FPCFG_offFREG )
+#define FPCFG_mskFMA		( 0x1  << FPCFG_offFMA )
+#define FPCFG_mskIMVER		( 0x1F  << FPCFG_offIMVER )
+#define FPCFG_mskAVER		( 0x1F  << FPCFG_offAVER )
+
+/* 8 Single precision or 4 double precision registers are available */
+#define SP8_DP4_reg		0
+/* 16 Single precision or 8 double precision registers are available */
+#define SP16_DP8_reg		1
+/* 32 Single precision or 16 double precision registers are available */
+#define SP32_DP16_reg		2
+/* 32 Single precision or 32 double precision registers are available */
+#define SP32_DP32_reg		3
+
+/******************************************************************************
+ * fucpr: FUCOP_CTL (FPU and Coprocessor Enable Control Register)
+ *****************************************************************************/
+#define FUCOP_CTL_offCP0EN	0
+#define FUCOP_CTL_offCP1EN	1
+#define FUCOP_CTL_offCP2EN	2
+#define FUCOP_CTL_offCP3EN	3
+#define FUCOP_CTL_offAUEN	31
+
+#define FUCOP_CTL_mskCP0EN	( 0x1  << FUCOP_CTL_offCP0EN )
+#define FUCOP_CTL_mskCP1EN	( 0x1  << FUCOP_CTL_offCP1EN )
+#define FUCOP_CTL_mskCP2EN      ( 0x1  << FUCOP_CTL_offCP2EN )
+#define FUCOP_CTL_mskCP3EN      ( 0x1  << FUCOP_CTL_offCP3EN )
+#define FUCOP_CTL_mskAUEN       ( 0x1  << FUCOP_CTL_offAUEN )
+
+#endif /* __NDS32_BITFIELD_H__ */