Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 280 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/fsl/b4qds.dtsi b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
new file mode 100644
index 000000000..05be919f3
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/b4qds.dtsi
@@ -0,0 +1,280 @@
+/*
+ * B4420DS Device Tree Source
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor, Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * This software is provided by Freescale Semiconductor "as is" and any
+ * express or implied warranties, including, but not limited to, the implied
+ * warranties of merchantability and fitness for a particular purpose are
+ * disclaimed. In no event shall Freescale Semiconductor be liable for any
+ * direct, indirect, incidental, special, exemplary, or consequential damages
+ * (including, but not limited to, procurement of substitute goods or services;
+ * loss of use, data, or profits; or business interruption) however caused and
+ * on any theory of liability, whether in contract, strict liability, or tort
+ * (including negligence or otherwise) arising in any way out of the use of
+ * this software, even if advised of the possibility of such damage.
+ */
+
+/ {
+	model = "fsl,B4QDS";
+	compatible = "fsl,B4QDS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		crypto = &crypto;
+		phy_sgmii_10 = &phy_sgmii_10;
+		phy_sgmii_11 = &phy_sgmii_11;
+		phy_sgmii_1c = &phy_sgmii_1c;
+		phy_sgmii_1d = &phy_sgmii_1d;
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 10MB for Linux Kernel Image */
+				reg = <0x00200000 0x00A00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@c00000 {
+				/* 500MB for Root file System Image */
+				reg = <0x00c00000 0x1F400000>;
+				label = "NAND RFS Image";
+			};
+		};
+
+		board-control@3,0 {
+			compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis";
+			reg = <3 0 0x300>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		bman_fbpr: bman-fbpr {
+			size = <0 0x1000000>;
+			alignment = <0 0x1000000>;
+		};
+		qman_fqd: qman-fqd {
+			size = <0 0x400000>;
+			alignment = <0 0x400000>;
+		};
+		qman_pfdr: qman-pfdr {
+			size = <0 0x2000000>;
+			alignment = <0 0x2000000>;
+		};
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01052000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "sst,sst25wf040", "jedec,spi-nor";
+				reg = <0>;
+				spi-max-frequency = <40000000>; /* input clock */
+			};
+		};
+
+		sdhc@114000 {
+			/*Disabled as there is no sdhc connector on B4420QDS board*/
+			status = "disabled";
+		};
+
+		i2c@118000 {
+			mux@77 {
+				compatible = "nxp,pca9547";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					eeprom@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+					};
+					eeprom@51 {
+						compatible = "atmel,24c256";
+						reg = <0x51>;
+					};
+					eeprom@53 {
+						compatible = "atmel,24c256";
+						reg = <0x53>;
+					};
+					eeprom@57 {
+						compatible = "atmel,24c256";
+						reg = <0x57>;
+					};
+					rtc@68 {
+						compatible = "dallas,ds3232";
+						reg = <0x68>;
+					};
+				};
+
+				i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x2>;
+
+					ina220@40 {
+						compatible = "ti,ina220";
+						reg = <0x40>;
+						shunt-resistor = <1000>;
+					};
+				};
+
+				i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0x3>;
+
+					adt7461@4c {
+						compatible = "adi,adt7461";
+						reg = <0x4c>;
+					};
+				};
+			};
+		};
+
+		usb@210000 {
+			dr_mode = "host";
+			phy_type = "ulpi";
+		};
+
+		fman@400000 {
+			ethernet@e0000 {
+				phy-handle = <&phy_sgmii_10>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e2000 {
+				phy-handle = <&phy_sgmii_11>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e4000 {
+				phy-handle = <&phy_sgmii_1c>;
+				phy-connection-type = "sgmii";
+			};
+
+			ethernet@e6000 {
+				phy-handle = <&phy_sgmii_1d>;
+				phy-connection-type = "sgmii";
+			};
+
+			mdio@fc000 {
+				phy_sgmii_10: ethernet-phy@10 {
+					reg = <0x10>;
+				};
+
+				phy_sgmii_11: ethernet-phy@11 {
+					reg = <0x11>;
+				};
+
+				phy_sgmii_1c: ethernet-phy@1c {
+					reg = <0x1c>;
+					status = "disabled";
+				};
+
+				phy_sgmii_1d: ethernet-phy@1d {
+					reg = <0x1d>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+
+	pci0: pcie@ffe200000 {
+		reg = <0xf 0xfe200000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+};
+
+/include/ "b4si-post.dtsi"