Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 3020 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
new file mode 100644
index 000000000..5c77b9a24
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -0,0 +1,3020 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au)
+ *                          Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  TODO:
+ *
+ *   - Replace mdelay with some schedule loop if possible
+ *   - Shorten some obfuscated delays on some routines (like modem
+ *     power)
+ *   - Refcount some clocks (see darwin)
+ *   - Split split split...
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/spinlock.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <asm/sections.h>
+#include <asm/errno.h>
+#include <asm/ohare.h>
+#include <asm/heathrow.h>
+#include <asm/keylargo.h>
+#include <asm/uninorth.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/dbdma.h>
+#include <asm/pci-bridge.h>
+#include <asm/pmac_low_i2c.h>
+
+#undef DEBUG_FEATURE
+
+#ifdef DEBUG_FEATURE
+#define DBG(fmt...) printk(KERN_DEBUG fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifdef CONFIG_PPC_BOOK3S_32
+extern int powersave_lowspeed;
+#endif
+
+extern int powersave_nap;
+extern struct device_node *k2_skiplist[2];
+
+/*
+ * We use a single global lock to protect accesses. Each driver has
+ * to take care of its own locking
+ */
+DEFINE_RAW_SPINLOCK(feature_lock);
+
+#define LOCK(flags)	raw_spin_lock_irqsave(&feature_lock, flags);
+#define UNLOCK(flags)	raw_spin_unlock_irqrestore(&feature_lock, flags);
+
+
+/*
+ * Instance of some macio stuffs
+ */
+struct macio_chip macio_chips[MAX_MACIO_CHIPS];
+
+struct macio_chip *macio_find(struct device_node *child, int type)
+{
+	while(child) {
+		int	i;
+
+		for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++)
+			if (child == macio_chips[i].of_node &&
+			    (!type || macio_chips[i].type == type))
+				return &macio_chips[i];
+		child = child->parent;
+	}
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(macio_find);
+
+static const char *macio_names[] =
+{
+	"Unknown",
+	"Grand Central",
+	"OHare",
+	"OHareII",
+	"Heathrow",
+	"Gatwick",
+	"Paddington",
+	"Keylargo",
+	"Pangea",
+	"Intrepid",
+	"K2",
+	"Shasta",
+};
+
+
+struct device_node *uninorth_node;
+u32 __iomem *uninorth_base;
+
+static u32 uninorth_rev;
+static int uninorth_maj;
+static void __iomem *u3_ht_base;
+
+/*
+ * For each motherboard family, we have a table of functions pointers
+ * that handle the various features.
+ */
+
+typedef long (*feature_call)(struct device_node *node, long param, long value);
+
+struct feature_table_entry {
+	unsigned int	selector;
+	feature_call	function;
+};
+
+struct pmac_mb_def
+{
+	const char*			model_string;
+	const char*			model_name;
+	int				model_id;
+	struct feature_table_entry*	features;
+	unsigned long			board_flags;
+};
+static struct pmac_mb_def pmac_mb;
+
+/*
+ * Here are the chip specific feature functions
+ */
+
+static inline int simple_feature_tweak(struct device_node *node, int type,
+				       int reg, u32 mask, int value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+
+	macio = macio_find(node, type);
+	if (!macio)
+		return -ENODEV;
+	LOCK(flags);
+	if (value)
+		MACIO_BIS(reg, mask);
+	else
+		MACIO_BIC(reg, mask);
+	(void)MACIO_IN32(reg);
+	UNLOCK(flags);
+
+	return 0;
+}
+
+#ifndef CONFIG_PPC64
+
+static long ohare_htw_scc_enable(struct device_node *node, long param,
+				 long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		chan_mask;
+	unsigned long		fcr;
+	unsigned long		flags;
+	int			htw, trans;
+	unsigned long		rmask;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	if (of_node_name_eq(node, "ch-a"))
+		chan_mask = MACIO_FLAG_SCCA_ON;
+	else if (of_node_name_eq(node, "ch-b"))
+		chan_mask = MACIO_FLAG_SCCB_ON;
+	else
+		return -ENODEV;
+
+	htw = (macio->type == macio_heathrow || macio->type == macio_paddington
+		|| macio->type == macio_gatwick);
+	/* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */
+	trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
+		 pmac_mb.model_id != PMAC_TYPE_YIKES);
+	if (value) {
+#ifdef CONFIG_ADB_PMU
+		if ((param & 0xfff) == PMAC_SCC_IRDA)
+			pmu_enable_irled(1);
+#endif /* CONFIG_ADB_PMU */
+		LOCK(flags);
+		fcr = MACIO_IN32(OHARE_FCR);
+		/* Check if scc cell need enabling */
+		if (!(fcr & OH_SCC_ENABLE)) {
+			fcr |= OH_SCC_ENABLE;
+			if (htw) {
+				/* Side effect: this will also power up the
+				 * modem, but it's too messy to figure out on which
+				 * ports this controls the transceiver and on which
+				 * it controls the modem
+				 */
+				if (trans)
+					fcr &= ~HRW_SCC_TRANS_EN_N;
+				MACIO_OUT32(OHARE_FCR, fcr);
+				fcr |= (rmask = HRW_RESET_SCC);
+				MACIO_OUT32(OHARE_FCR, fcr);
+			} else {
+				fcr |= (rmask = OH_SCC_RESET);
+				MACIO_OUT32(OHARE_FCR, fcr);
+			}
+			UNLOCK(flags);
+			(void)MACIO_IN32(OHARE_FCR);
+			mdelay(15);
+			LOCK(flags);
+			fcr &= ~rmask;
+			MACIO_OUT32(OHARE_FCR, fcr);
+		}
+		if (chan_mask & MACIO_FLAG_SCCA_ON)
+			fcr |= OH_SCCA_IO;
+		if (chan_mask & MACIO_FLAG_SCCB_ON)
+			fcr |= OH_SCCB_IO;
+		MACIO_OUT32(OHARE_FCR, fcr);
+		macio->flags |= chan_mask;
+		UNLOCK(flags);
+		if (param & PMAC_SCC_FLAG_XMON)
+			macio->flags |= MACIO_FLAG_SCC_LOCKED;
+	} else {
+		if (macio->flags & MACIO_FLAG_SCC_LOCKED)
+			return -EPERM;
+		LOCK(flags);
+		fcr = MACIO_IN32(OHARE_FCR);
+		if (chan_mask & MACIO_FLAG_SCCA_ON)
+			fcr &= ~OH_SCCA_IO;
+		if (chan_mask & MACIO_FLAG_SCCB_ON)
+			fcr &= ~OH_SCCB_IO;
+		MACIO_OUT32(OHARE_FCR, fcr);
+		if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) {
+			fcr &= ~OH_SCC_ENABLE;
+			if (htw && trans)
+				fcr |= HRW_SCC_TRANS_EN_N;
+			MACIO_OUT32(OHARE_FCR, fcr);
+		}
+		macio->flags &= ~(chan_mask);
+		UNLOCK(flags);
+		mdelay(10);
+#ifdef CONFIG_ADB_PMU
+		if ((param & 0xfff) == PMAC_SCC_IRDA)
+			pmu_enable_irled(0);
+#endif /* CONFIG_ADB_PMU */
+	}
+	return 0;
+}
+
+static long ohare_floppy_enable(struct device_node *node, long param,
+				long value)
+{
+	return simple_feature_tweak(node, macio_ohare,
+		OHARE_FCR, OH_FLOPPY_ENABLE, value);
+}
+
+static long ohare_mesh_enable(struct device_node *node, long param, long value)
+{
+	return simple_feature_tweak(node, macio_ohare,
+		OHARE_FCR, OH_MESH_ENABLE, value);
+}
+
+static long ohare_ide_enable(struct device_node *node, long param, long value)
+{
+	switch(param) {
+	case 0:
+		/* For some reason, setting the bit in set_initial_features()
+		 * doesn't stick. I'm still investigating... --BenH.
+		 */
+		if (value)
+			simple_feature_tweak(node, macio_ohare,
+				OHARE_FCR, OH_IOBUS_ENABLE, 1);
+		return simple_feature_tweak(node, macio_ohare,
+			OHARE_FCR, OH_IDE0_ENABLE, value);
+	case 1:
+		return simple_feature_tweak(node, macio_ohare,
+			OHARE_FCR, OH_BAY_IDE_ENABLE, value);
+	default:
+		return -ENODEV;
+	}
+}
+
+static long ohare_ide_reset(struct device_node *node, long param, long value)
+{
+	switch(param) {
+	case 0:
+		return simple_feature_tweak(node, macio_ohare,
+			OHARE_FCR, OH_IDE0_RESET_N, !value);
+	case 1:
+		return simple_feature_tweak(node, macio_ohare,
+			OHARE_FCR, OH_IDE1_RESET_N, !value);
+	default:
+		return -ENODEV;
+	}
+}
+
+static long ohare_sleep_state(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio = &macio_chips[0];
+
+	if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+		return -EPERM;
+	if (value == 1) {
+		MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE);
+	} else if (value == 0) {
+		MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+	}
+
+	return 0;
+}
+
+static long heathrow_modem_enable(struct device_node *node, long param,
+				  long value)
+{
+	struct macio_chip*	macio;
+	u8			gpio;
+	unsigned long		flags;
+
+	macio = macio_find(node, macio_unknown);
+	if (!macio)
+		return -ENODEV;
+	gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1;
+	if (!value) {
+		LOCK(flags);
+		MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
+		UNLOCK(flags);
+		(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+		mdelay(250);
+	}
+	if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE &&
+	    pmac_mb.model_id != PMAC_TYPE_YIKES) {
+		LOCK(flags);
+		if (value)
+			MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+		else
+			MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+		UNLOCK(flags);
+		(void)MACIO_IN32(HEATHROW_FCR);
+		mdelay(250);
+	}
+	if (value) {
+		LOCK(flags);
+		MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
+		(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio);
+		(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1);
+		(void)MACIO_IN8(HRW_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250);
+	}
+	return 0;
+}
+
+static long heathrow_floppy_enable(struct device_node *node, long param,
+				   long value)
+{
+	return simple_feature_tweak(node, macio_unknown,
+		HEATHROW_FCR,
+		HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE,
+		value);
+}
+
+static long heathrow_mesh_enable(struct device_node *node, long param,
+				 long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+
+	macio = macio_find(node, macio_unknown);
+	if (!macio)
+		return -ENODEV;
+	LOCK(flags);
+	/* Set clear mesh cell enable */
+	if (value)
+		MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE);
+	else
+		MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE);
+	(void)MACIO_IN32(HEATHROW_FCR);
+	udelay(10);
+	/* Set/Clear termination power */
+	if (value)
+		MACIO_BIC(HEATHROW_MBCR, 0x04000000);
+	else
+		MACIO_BIS(HEATHROW_MBCR, 0x04000000);
+	(void)MACIO_IN32(HEATHROW_MBCR);
+	udelay(10);
+	UNLOCK(flags);
+
+	return 0;
+}
+
+static long heathrow_ide_enable(struct device_node *node, long param,
+				long value)
+{
+	switch(param) {
+	case 0:
+		return simple_feature_tweak(node, macio_unknown,
+			HEATHROW_FCR, HRW_IDE0_ENABLE, value);
+	case 1:
+		return simple_feature_tweak(node, macio_unknown,
+			HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value);
+	default:
+		return -ENODEV;
+	}
+}
+
+static long heathrow_ide_reset(struct device_node *node, long param,
+			       long value)
+{
+	switch(param) {
+	case 0:
+		return simple_feature_tweak(node, macio_unknown,
+			HEATHROW_FCR, HRW_IDE0_RESET_N, !value);
+	case 1:
+		return simple_feature_tweak(node, macio_unknown,
+			HEATHROW_FCR, HRW_IDE1_RESET_N, !value);
+	default:
+		return -ENODEV;
+	}
+}
+
+static long heathrow_bmac_enable(struct device_node *node, long param,
+				 long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	if (value) {
+		LOCK(flags);
+		MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
+		MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET);
+		UNLOCK(flags);
+		(void)MACIO_IN32(HEATHROW_FCR);
+		mdelay(10);
+		LOCK(flags);
+		MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET);
+		UNLOCK(flags);
+		(void)MACIO_IN32(HEATHROW_FCR);
+		mdelay(10);
+	} else {
+		LOCK(flags);
+		MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE);
+		UNLOCK(flags);
+	}
+	return 0;
+}
+
+static long heathrow_sound_enable(struct device_node *node, long param,
+				  long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+
+	/* B&W G3 and Yikes don't support that properly (the
+	 * sound appear to never come back after being shut down).
+	 */
+	if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE ||
+	    pmac_mb.model_id == PMAC_TYPE_YIKES)
+		return 0;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	if (value) {
+		LOCK(flags);
+		MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+		MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
+		UNLOCK(flags);
+		(void)MACIO_IN32(HEATHROW_FCR);
+	} else {
+		LOCK(flags);
+		MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
+		MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+		UNLOCK(flags);
+	}
+	return 0;
+}
+
+static u32 save_fcr[6];
+static u32 save_mbcr;
+static struct dbdma_regs save_dbdma[13];
+static struct dbdma_regs save_alt_dbdma[13];
+
+static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save)
+{
+	int i;
+
+	/* Save state & config of DBDMA channels */
+	for (i = 0; i < 13; i++) {
+		volatile struct dbdma_regs __iomem * chan = (void __iomem *)
+			(macio->base + ((0x8000+i*0x100)>>2));
+		save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi);
+		save[i].cmdptr = in_le32(&chan->cmdptr);
+		save[i].intr_sel = in_le32(&chan->intr_sel);
+		save[i].br_sel = in_le32(&chan->br_sel);
+		save[i].wait_sel = in_le32(&chan->wait_sel);
+	}
+}
+
+static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save)
+{
+	int i;
+
+	/* Save state & config of DBDMA channels */
+	for (i = 0; i < 13; i++) {
+		volatile struct dbdma_regs __iomem * chan = (void __iomem *)
+			(macio->base + ((0x8000+i*0x100)>>2));
+		out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);
+		while (in_le32(&chan->status) & ACTIVE)
+			mb();
+		out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi);
+		out_le32(&chan->cmdptr, save[i].cmdptr);
+		out_le32(&chan->intr_sel, save[i].intr_sel);
+		out_le32(&chan->br_sel, save[i].br_sel);
+		out_le32(&chan->wait_sel, save[i].wait_sel);
+	}
+}
+
+static void heathrow_sleep(struct macio_chip *macio, int secondary)
+{
+	if (secondary) {
+		dbdma_save(macio, save_alt_dbdma);
+		save_fcr[2] = MACIO_IN32(0x38);
+		save_fcr[3] = MACIO_IN32(0x3c);
+	} else {
+		dbdma_save(macio, save_dbdma);
+		save_fcr[0] = MACIO_IN32(0x38);
+		save_fcr[1] = MACIO_IN32(0x3c);
+		save_mbcr = MACIO_IN32(0x34);
+		/* Make sure sound is shut down */
+		MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N);
+		MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+		/* This seems to be necessary as well or the fan
+		 * keeps coming up and battery drains fast */
+		MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE);
+		MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N);
+		/* Make sure eth is down even if module or sleep
+		 * won't work properly */
+		MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET);
+	}
+	/* Make sure modem is shut down */
+	MACIO_OUT8(HRW_GPIO_MODEM_RESET,
+		MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1);
+	MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N);
+	MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE);
+
+	/* Let things settle */
+	(void)MACIO_IN32(HEATHROW_FCR);
+}
+
+static void heathrow_wakeup(struct macio_chip *macio, int secondary)
+{
+	if (secondary) {
+		MACIO_OUT32(0x38, save_fcr[2]);
+		(void)MACIO_IN32(0x38);
+		mdelay(1);
+		MACIO_OUT32(0x3c, save_fcr[3]);
+		(void)MACIO_IN32(0x38);
+		mdelay(10);
+		dbdma_restore(macio, save_alt_dbdma);
+	} else {
+		MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE);
+		(void)MACIO_IN32(0x38);
+		mdelay(1);
+		MACIO_OUT32(0x3c, save_fcr[1]);
+		(void)MACIO_IN32(0x38);
+		mdelay(1);
+		MACIO_OUT32(0x34, save_mbcr);
+		(void)MACIO_IN32(0x38);
+		mdelay(10);
+		dbdma_restore(macio, save_dbdma);
+	}
+}
+
+static long heathrow_sleep_state(struct device_node *node, long param,
+				 long value)
+{
+	if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+		return -EPERM;
+	if (value == 1) {
+		if (macio_chips[1].type == macio_gatwick)
+			heathrow_sleep(&macio_chips[0], 1);
+		heathrow_sleep(&macio_chips[0], 0);
+	} else if (value == 0) {
+		heathrow_wakeup(&macio_chips[0], 0);
+		if (macio_chips[1].type == macio_gatwick)
+			heathrow_wakeup(&macio_chips[0], 1);
+	}
+	return 0;
+}
+
+static long core99_scc_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+	unsigned long		chan_mask;
+	u32			fcr;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	if (of_node_name_eq(node, "ch-a"))
+		chan_mask = MACIO_FLAG_SCCA_ON;
+	else if (of_node_name_eq(node, "ch-b"))
+		chan_mask = MACIO_FLAG_SCCB_ON;
+	else
+		return -ENODEV;
+
+	if (value) {
+		int need_reset_scc = 0;
+		int need_reset_irda = 0;
+
+		LOCK(flags);
+		fcr = MACIO_IN32(KEYLARGO_FCR0);
+		/* Check if scc cell need enabling */
+		if (!(fcr & KL0_SCC_CELL_ENABLE)) {
+			fcr |= KL0_SCC_CELL_ENABLE;
+			need_reset_scc = 1;
+		}
+		if (chan_mask & MACIO_FLAG_SCCA_ON) {
+			fcr |= KL0_SCCA_ENABLE;
+			/* Don't enable line drivers for I2S modem */
+			if ((param & 0xfff) == PMAC_SCC_I2S1)
+				fcr &= ~KL0_SCC_A_INTF_ENABLE;
+			else
+				fcr |= KL0_SCC_A_INTF_ENABLE;
+		}
+		if (chan_mask & MACIO_FLAG_SCCB_ON) {
+			fcr |= KL0_SCCB_ENABLE;
+			/* Perform irda specific inits */
+			if ((param & 0xfff) == PMAC_SCC_IRDA) {
+				fcr &= ~KL0_SCC_B_INTF_ENABLE;
+				fcr |= KL0_IRDA_ENABLE;
+				fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE;
+				fcr |= KL0_IRDA_SOURCE1_SEL;
+				fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
+				fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
+				need_reset_irda = 1;
+			} else
+				fcr |= KL0_SCC_B_INTF_ENABLE;
+		}
+		MACIO_OUT32(KEYLARGO_FCR0, fcr);
+		macio->flags |= chan_mask;
+		if (need_reset_scc)  {
+			MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET);
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			UNLOCK(flags);
+			mdelay(15);
+			LOCK(flags);
+			MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET);
+		}
+		if (need_reset_irda)  {
+			MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET);
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			UNLOCK(flags);
+			mdelay(15);
+			LOCK(flags);
+			MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET);
+		}
+		UNLOCK(flags);
+		if (param & PMAC_SCC_FLAG_XMON)
+			macio->flags |= MACIO_FLAG_SCC_LOCKED;
+	} else {
+		if (macio->flags & MACIO_FLAG_SCC_LOCKED)
+			return -EPERM;
+		LOCK(flags);
+		fcr = MACIO_IN32(KEYLARGO_FCR0);
+		if (chan_mask & MACIO_FLAG_SCCA_ON)
+			fcr &= ~KL0_SCCA_ENABLE;
+		if (chan_mask & MACIO_FLAG_SCCB_ON) {
+			fcr &= ~KL0_SCCB_ENABLE;
+			/* Perform irda specific clears */
+			if ((param & 0xfff) == PMAC_SCC_IRDA) {
+				fcr &= ~KL0_IRDA_ENABLE;
+				fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE);
+				fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0);
+				fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND);
+			}
+		}
+		MACIO_OUT32(KEYLARGO_FCR0, fcr);
+		if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) {
+			fcr &= ~KL0_SCC_CELL_ENABLE;
+			MACIO_OUT32(KEYLARGO_FCR0, fcr);
+		}
+		macio->flags &= ~(chan_mask);
+		UNLOCK(flags);
+		mdelay(10);
+	}
+	return 0;
+}
+
+static long
+core99_modem_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio;
+	u8			gpio;
+	unsigned long		flags;
+
+	/* Hack for internal USB modem */
+	if (node == NULL) {
+		if (macio_chips[0].type != macio_keylargo)
+			return -ENODEV;
+		node = macio_chips[0].of_node;
+	}
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
+	gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
+	gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
+
+	if (!value) {
+		LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+		UNLOCK(flags);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		mdelay(250);
+	}
+	LOCK(flags);
+	if (value) {
+		MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+		UNLOCK(flags);
+		(void)MACIO_IN32(KEYLARGO_FCR2);
+		mdelay(250);
+	} else {
+		MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+		UNLOCK(flags);
+	}
+	if (value) {
+		LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250);
+	}
+	return 0;
+}
+
+static long
+pangea_modem_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio;
+	u8			gpio;
+	unsigned long		flags;
+
+	/* Hack for internal USB modem */
+	if (node == NULL) {
+		if (macio_chips[0].type != macio_pangea &&
+		    macio_chips[0].type != macio_intrepid)
+			return -ENODEV;
+		node = macio_chips[0].of_node;
+	}
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+	gpio = MACIO_IN8(KL_GPIO_MODEM_RESET);
+	gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE;
+	gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA;
+
+	if (!value) {
+		LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+		UNLOCK(flags);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		mdelay(250);
+	}
+	LOCK(flags);
+	if (value) {
+		MACIO_OUT8(KL_GPIO_MODEM_POWER,
+			KEYLARGO_GPIO_OUTPUT_ENABLE);
+		UNLOCK(flags);
+		(void)MACIO_IN32(KEYLARGO_FCR2);
+		mdelay(250);
+	} else {
+		MACIO_OUT8(KL_GPIO_MODEM_POWER,
+			KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
+		UNLOCK(flags);
+	}
+	if (value) {
+		LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250); LOCK(flags);
+		MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA);
+		(void)MACIO_IN8(KL_GPIO_MODEM_RESET);
+		UNLOCK(flags); mdelay(250);
+	}
+	return 0;
+}
+
+static long
+core99_ata100_enable(struct device_node *node, long value)
+{
+	unsigned long flags;
+	struct pci_dev *pdev = NULL;
+	u8 pbus, pid;
+	int rc;
+
+	if (uninorth_rev < 0x24)
+		return -ENODEV;
+
+	LOCK(flags);
+	if (value)
+		UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
+	else
+		UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100);
+	(void)UN_IN(UNI_N_CLOCK_CNTL);
+	UNLOCK(flags);
+	udelay(20);
+
+	if (value) {
+		if (pci_device_from_OF_node(node, &pbus, &pid) == 0)
+			pdev = pci_get_domain_bus_and_slot(0, pbus, pid);
+		if (pdev == NULL)
+			return 0;
+		rc = pci_enable_device(pdev);
+		if (rc == 0)
+			pci_set_master(pdev);
+		pci_dev_put(pdev);
+		if (rc)
+			return rc;
+	}
+	return 0;
+}
+
+static long
+core99_ide_enable(struct device_node *node, long param, long value)
+{
+	/* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2
+	 * based ata-100
+	 */
+	switch(param) {
+	    case 0:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value);
+	    case 1:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value);
+	    case 2:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_UIDE_ENABLE, value);
+	    case 3:
+		return core99_ata100_enable(node, value);
+	    default:
+		return -ENODEV;
+	}
+}
+
+static long
+core99_ide_reset(struct device_node *node, long param, long value)
+{
+	switch(param) {
+	    case 0:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value);
+	    case 1:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value);
+	    case 2:
+		return simple_feature_tweak(node, macio_unknown,
+			KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value);
+	    default:
+		return -ENODEV;
+	}
+}
+
+static long
+core99_gmac_enable(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+
+	LOCK(flags);
+	if (value)
+		UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
+	else
+		UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC);
+	(void)UN_IN(UNI_N_CLOCK_CNTL);
+	UNLOCK(flags);
+	udelay(20);
+
+	return 0;
+}
+
+static long
+core99_gmac_phy_reset(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+	struct macio_chip *macio;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+
+	LOCK(flags);
+	MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE);
+	(void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET);
+	UNLOCK(flags);
+	mdelay(10);
+	LOCK(flags);
+	MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */
+		KEYLARGO_GPIO_OUTOUT_DATA);
+	UNLOCK(flags);
+	mdelay(10);
+
+	return 0;
+}
+
+static long
+core99_sound_chip_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+
+	/* Do a better probe code, screamer G4 desktops &
+	 * iMacs can do that too, add a recalibrate  in
+	 * the driver as well
+	 */
+	if (pmac_mb.model_id == PMAC_TYPE_PISMO ||
+	    pmac_mb.model_id == PMAC_TYPE_TITANIUM) {
+		LOCK(flags);
+		if (value)
+			MACIO_OUT8(KL_GPIO_SOUND_POWER,
+				KEYLARGO_GPIO_OUTPUT_ENABLE |
+				KEYLARGO_GPIO_OUTOUT_DATA);
+		else
+			MACIO_OUT8(KL_GPIO_SOUND_POWER,
+				KEYLARGO_GPIO_OUTPUT_ENABLE);
+		(void)MACIO_IN8(KL_GPIO_SOUND_POWER);
+		UNLOCK(flags);
+	}
+	return 0;
+}
+
+static long
+core99_airport_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip*	macio;
+	unsigned long		flags;
+	int			state;
+
+	macio = macio_find(node, 0);
+	if (!macio)
+		return -ENODEV;
+
+	/* Hint: we allow passing of macio itself for the sake of the
+	 * sleep code
+	 */
+	if (node != macio->of_node &&
+	    (!node->parent || node->parent != macio->of_node))
+		return -ENODEV;
+	state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0;
+	if (value == state)
+		return 0;
+	if (value) {
+		/* This code is a reproduction of OF enable-cardslot
+		 * and init-wireless methods, slightly hacked until
+		 * I got it working.
+		 */
+		LOCK(flags);
+		MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5);
+		(void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
+		UNLOCK(flags);
+		mdelay(10);
+		LOCK(flags);
+		MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4);
+		(void)MACIO_IN8(KEYLARGO_GPIO_0+0xf);
+		UNLOCK(flags);
+
+		mdelay(10);
+
+		LOCK(flags);
+		MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
+		(void)MACIO_IN32(KEYLARGO_FCR2);
+		udelay(10);
+		MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0);
+		(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb);
+		udelay(10);
+		MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28);
+		(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa);
+		udelay(10);
+		MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28);
+		(void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd);
+		udelay(10);
+		MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28);
+		(void)MACIO_IN8(KEYLARGO_GPIO_0+0xd);
+		udelay(10);
+		MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28);
+		(void)MACIO_IN8(KEYLARGO_GPIO_0+0xe);
+		UNLOCK(flags);
+		udelay(10);
+		MACIO_OUT32(0x1c000, 0);
+		mdelay(1);
+		MACIO_OUT8(0x1a3e0, 0x41);
+		(void)MACIO_IN8(0x1a3e0);
+		udelay(10);
+		LOCK(flags);
+		MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16);
+		(void)MACIO_IN32(KEYLARGO_FCR2);
+		UNLOCK(flags);
+		mdelay(100);
+
+		macio->flags |= MACIO_FLAG_AIRPORT_ON;
+	} else {
+		LOCK(flags);
+		MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16);
+		(void)MACIO_IN32(KEYLARGO_FCR2);
+		MACIO_OUT8(KL_GPIO_AIRPORT_0, 0);
+		MACIO_OUT8(KL_GPIO_AIRPORT_1, 0);
+		MACIO_OUT8(KL_GPIO_AIRPORT_2, 0);
+		MACIO_OUT8(KL_GPIO_AIRPORT_3, 0);
+		MACIO_OUT8(KL_GPIO_AIRPORT_4, 0);
+		(void)MACIO_IN8(KL_GPIO_AIRPORT_4);
+		UNLOCK(flags);
+
+		macio->flags &= ~MACIO_FLAG_AIRPORT_ON;
+	}
+	return 0;
+}
+
+#ifdef CONFIG_SMP
+static long
+core99_reset_cpu(struct device_node *node, long param, long value)
+{
+	unsigned int reset_io = 0;
+	unsigned long flags;
+	struct macio_chip *macio;
+	struct device_node *np;
+	const int dflt_reset_lines[] = {	KL_GPIO_RESET_CPU0,
+						KL_GPIO_RESET_CPU1,
+						KL_GPIO_RESET_CPU2,
+						KL_GPIO_RESET_CPU3 };
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo)
+		return -ENODEV;
+
+	for_each_of_cpu_node(np) {
+		const u32 *num = of_get_property(np, "reg", NULL);
+		const u32 *rst = of_get_property(np, "soft-reset", NULL);
+		if (num == NULL || rst == NULL)
+			continue;
+		if (param == *num) {
+			reset_io = *rst;
+			break;
+		}
+	}
+	if (np == NULL || reset_io == 0)
+		reset_io = dflt_reset_lines[param];
+
+	LOCK(flags);
+	MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
+	(void)MACIO_IN8(reset_io);
+	udelay(1);
+	MACIO_OUT8(reset_io, 0);
+	(void)MACIO_IN8(reset_io);
+	UNLOCK(flags);
+
+	return 0;
+}
+#endif /* CONFIG_SMP */
+
+static long
+core99_usb_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio;
+	unsigned long flags;
+	const char *prop;
+	int number;
+	u32 reg;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+
+	prop = of_get_property(node, "AAPL,clock-id", NULL);
+	if (!prop)
+		return -ENODEV;
+	if (strncmp(prop, "usb0u048", 8) == 0)
+		number = 0;
+	else if (strncmp(prop, "usb1u148", 8) == 0)
+		number = 2;
+	else if (strncmp(prop, "usb2u248", 8) == 0)
+		number = 4;
+	else
+		return -ENODEV;
+
+	/* Sorry for the brute-force locking, but this is only used during
+	 * sleep and the timing seem to be critical
+	 */
+	LOCK(flags);
+	if (value) {
+		/* Turn ON */
+		if (number == 0) {
+			MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			UNLOCK(flags);
+			mdelay(1);
+			LOCK(flags);
+			MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
+		} else if (number == 2) {
+			MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
+			UNLOCK(flags);
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			mdelay(1);
+			LOCK(flags);
+			MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
+		} else if (number == 4) {
+			MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
+			UNLOCK(flags);
+			(void)MACIO_IN32(KEYLARGO_FCR1);
+			mdelay(1);
+			LOCK(flags);
+			MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE);
+		}
+		if (number < 4) {
+			reg = MACIO_IN32(KEYLARGO_FCR4);
+			reg &=	~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
+				KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number));
+			reg &=	~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
+				KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1));
+			MACIO_OUT32(KEYLARGO_FCR4, reg);
+			(void)MACIO_IN32(KEYLARGO_FCR4);
+			udelay(10);
+		} else {
+			reg = MACIO_IN32(KEYLARGO_FCR3);
+			reg &=	~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
+				KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0));
+			reg &=	~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
+				KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1));
+			MACIO_OUT32(KEYLARGO_FCR3, reg);
+			(void)MACIO_IN32(KEYLARGO_FCR3);
+			udelay(10);
+		}
+		if (macio->type == macio_intrepid) {
+			/* wait for clock stopped bits to clear */
+			u32 test0 = 0, test1 = 0;
+			u32 status0, status1;
+			int timeout = 1000;
+
+			UNLOCK(flags);
+			switch (number) {
+			case 0:
+				test0 = UNI_N_CLOCK_STOPPED_USB0;
+				test1 = UNI_N_CLOCK_STOPPED_USB0PCI;
+				break;
+			case 2:
+				test0 = UNI_N_CLOCK_STOPPED_USB1;
+				test1 = UNI_N_CLOCK_STOPPED_USB1PCI;
+				break;
+			case 4:
+				test0 = UNI_N_CLOCK_STOPPED_USB2;
+				test1 = UNI_N_CLOCK_STOPPED_USB2PCI;
+				break;
+			}
+			do {
+				if (--timeout <= 0) {
+					printk(KERN_ERR "core99_usb_enable: "
+					       "Timeout waiting for clocks\n");
+					break;
+				}
+				mdelay(1);
+				status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0);
+				status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1);
+			} while ((status0 & test0) | (status1 & test1));
+			LOCK(flags);
+		}
+	} else {
+		/* Turn OFF */
+		if (number < 4) {
+			reg = MACIO_IN32(KEYLARGO_FCR4);
+			reg |=	KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) |
+				KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number);
+			reg |=	KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) |
+				KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1);
+			MACIO_OUT32(KEYLARGO_FCR4, reg);
+			(void)MACIO_IN32(KEYLARGO_FCR4);
+			udelay(1);
+		} else {
+			reg = MACIO_IN32(KEYLARGO_FCR3);
+			reg |=	KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) |
+				KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0);
+			reg |=	KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) |
+				KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1);
+			MACIO_OUT32(KEYLARGO_FCR3, reg);
+			(void)MACIO_IN32(KEYLARGO_FCR3);
+			udelay(1);
+		}
+		if (number == 0) {
+			if (macio->type != macio_intrepid)
+				MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE);
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			udelay(1);
+			MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1));
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+		} else if (number == 2) {
+			if (macio->type != macio_intrepid)
+				MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE);
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+			udelay(1);
+			MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1));
+			(void)MACIO_IN32(KEYLARGO_FCR0);
+		} else if (number == 4) {
+			udelay(1);
+			MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1));
+			(void)MACIO_IN32(KEYLARGO_FCR1);
+		}
+		udelay(1);
+	}
+	UNLOCK(flags);
+
+	return 0;
+}
+
+static long
+core99_firewire_enable(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+	struct macio_chip *macio;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+	if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
+		return -ENODEV;
+
+	LOCK(flags);
+	if (value) {
+		UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
+		(void)UN_IN(UNI_N_CLOCK_CNTL);
+	} else {
+		UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW);
+		(void)UN_IN(UNI_N_CLOCK_CNTL);
+	}
+	UNLOCK(flags);
+	mdelay(1);
+
+	return 0;
+}
+
+static long
+core99_firewire_cable_power(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+	struct macio_chip *macio;
+
+	/* Trick: we allow NULL node */
+	if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0)
+		return -ENODEV;
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+	if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED))
+		return -ENODEV;
+
+	LOCK(flags);
+	if (value) {
+		MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0);
+		MACIO_IN8(KL_GPIO_FW_CABLE_POWER);
+		udelay(10);
+	} else {
+		MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4);
+		MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10);
+	}
+	UNLOCK(flags);
+	mdelay(1);
+
+	return 0;
+}
+
+static long
+intrepid_aack_delay_enable(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+
+	if (uninorth_rev < 0xd2)
+		return -ENODEV;
+
+	LOCK(flags);
+	if (param)
+		UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
+	else
+		UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE);
+	UNLOCK(flags);
+
+	return 0;
+}
+
+
+#endif /* CONFIG_PPC64 */
+
+static long
+core99_read_gpio(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio = &macio_chips[0];
+
+	return MACIO_IN8(param);
+}
+
+
+static long
+core99_write_gpio(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio = &macio_chips[0];
+
+	MACIO_OUT8(param, (u8)(value & 0xff));
+	return 0;
+}
+
+#ifdef CONFIG_PPC64
+static long g5_gmac_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio = &macio_chips[0];
+	unsigned long flags;
+
+	if (node == NULL)
+		return -ENODEV;
+
+	LOCK(flags);
+	if (value) {
+		MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
+		mb();
+		k2_skiplist[0] = NULL;
+	} else {
+		k2_skiplist[0] = node;
+		mb();
+		MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE);
+	}
+	
+	UNLOCK(flags);
+	mdelay(1);
+
+	return 0;
+}
+
+static long g5_fw_enable(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio = &macio_chips[0];
+	unsigned long flags;
+
+	if (node == NULL)
+		return -ENODEV;
+
+	LOCK(flags);
+	if (value) {
+		MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
+		mb();
+		k2_skiplist[1] = NULL;
+	} else {
+		k2_skiplist[1] = node;
+		mb();
+		MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE);
+	}
+	
+	UNLOCK(flags);
+	mdelay(1);
+
+	return 0;
+}
+
+static long g5_mpic_enable(struct device_node *node, long param, long value)
+{
+	unsigned long flags;
+	struct device_node *parent = of_get_parent(node);
+	int is_u3;
+
+	if (parent == NULL)
+		return 0;
+	is_u3 = of_node_name_eq(parent, "u3") || of_node_name_eq(parent, "u4");
+	of_node_put(parent);
+	if (!is_u3)
+		return 0;
+
+	LOCK(flags);
+	UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE);
+	UNLOCK(flags);
+
+	return 0;
+}
+
+static long g5_eth_phy_reset(struct device_node *node, long param, long value)
+{
+	struct macio_chip *macio = &macio_chips[0];
+	struct device_node *phy;
+	int need_reset;
+
+	/*
+	 * We must not reset the combo PHYs, only the BCM5221 found in
+	 * the iMac G5.
+	 */
+	phy = of_get_next_child(node, NULL);
+	if (!phy)
+		return -ENODEV;
+	need_reset = of_device_is_compatible(phy, "B5221");
+	of_node_put(phy);
+	if (!need_reset)
+		return 0;
+
+	/* PHY reset is GPIO 29, not in device-tree unfortunately */
+	MACIO_OUT8(K2_GPIO_EXTINT_0 + 29,
+		   KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA);
+	/* Thankfully, this is now always called at a time when we can
+	 * schedule by sungem.
+	 */
+	msleep(10);
+	MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0);
+
+	return 0;
+}
+
+static long g5_i2s_enable(struct device_node *node, long param, long value)
+{
+	/* Very crude implementation for now */
+	struct macio_chip *macio = &macio_chips[0];
+	unsigned long flags;
+	int cell;
+	u32 fcrs[3][3] = {
+		{ 0,
+		  K2_FCR1_I2S0_CELL_ENABLE |
+		  K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE,
+		  KL3_I2S0_CLK18_ENABLE
+		},
+		{ KL0_SCC_A_INTF_ENABLE,
+		  K2_FCR1_I2S1_CELL_ENABLE |
+		  K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE,
+		  KL3_I2S1_CLK18_ENABLE
+		},
+		{ KL0_SCC_B_INTF_ENABLE,
+		  SH_FCR1_I2S2_CELL_ENABLE |
+		  SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE,
+		  SH_FCR3_I2S2_CLK18_ENABLE
+		},
+	};
+
+	if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
+		return -ENODEV;
+	if (strncmp(node->name, "i2s-", 4))
+		return -ENODEV;
+	cell = node->name[4] - 'a';
+	switch(cell) {
+	case 0:
+	case 1:
+		break;
+	case 2:
+		if (macio->type == macio_shasta)
+			break;
+		fallthrough;
+	default:
+		return -ENODEV;
+	}
+
+	LOCK(flags);
+	if (value) {
+		MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]);
+		MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]);
+		MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]);
+	} else {
+		MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]);
+		MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]);
+		MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]);
+	}
+	udelay(10);
+	UNLOCK(flags);
+
+	return 0;
+}
+
+
+#ifdef CONFIG_SMP
+static long g5_reset_cpu(struct device_node *node, long param, long value)
+{
+	unsigned int reset_io = 0;
+	unsigned long flags;
+	struct macio_chip *macio;
+	struct device_node *np;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo2 && macio->type != macio_shasta)
+		return -ENODEV;
+
+	for_each_of_cpu_node(np) {
+		const u32 *num = of_get_property(np, "reg", NULL);
+		const u32 *rst = of_get_property(np, "soft-reset", NULL);
+		if (num == NULL || rst == NULL)
+			continue;
+		if (param == *num) {
+			reset_io = *rst;
+			break;
+		}
+	}
+	if (np == NULL || reset_io == 0)
+		return -ENODEV;
+
+	LOCK(flags);
+	MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE);
+	(void)MACIO_IN8(reset_io);
+	udelay(1);
+	MACIO_OUT8(reset_io, 0);
+	(void)MACIO_IN8(reset_io);
+	UNLOCK(flags);
+
+	return 0;
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * This can be called from pmac_smp so isn't static
+ *
+ * This takes the second CPU off the bus on dual CPU machines
+ * running UP
+ */
+void g5_phy_disable_cpu1(void)
+{
+	if (uninorth_maj == 3)
+		UN_OUT(U3_API_PHY_CONFIG_1, 0);
+}
+#endif /* CONFIG_PPC64 */
+
+#ifndef CONFIG_PPC64
+
+
+#ifdef CONFIG_PM
+static u32 save_gpio_levels[2];
+static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT];
+static u8 save_gpio_normal[KEYLARGO_GPIO_CNT];
+static u32 save_unin_clock_ctl;
+
+static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+	u32 temp;
+
+	if (sleep_mode) {
+		mdelay(1);
+		MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND);
+		(void)MACIO_IN32(KEYLARGO_FCR0);
+		mdelay(1);
+	}
+
+	MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+				KL0_SCC_CELL_ENABLE |
+				KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE |
+				KL0_IRDA_CLK19_ENABLE);
+
+	MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK);
+	MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE);
+
+	MACIO_BIC(KEYLARGO_FCR1,
+		KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
+		KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
+		KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+		KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+		KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+		KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N |
+		KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N |
+		KL1_UIDE_ENABLE);
+
+	MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+	MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE);
+
+	temp = MACIO_IN32(KEYLARGO_FCR3);
+	if (macio->rev >= 2) {
+		temp |= KL3_SHUTDOWN_PLL2X;
+		if (sleep_mode)
+			temp |= KL3_SHUTDOWN_PLL_TOTAL;
+	}
+
+	temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
+		KL3_SHUTDOWN_PLLKW35;
+	if (sleep_mode)
+		temp |= KL3_SHUTDOWN_PLLKW12;
+	temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE
+		| KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
+	if (sleep_mode)
+		temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE);
+	MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+	/* Flush posted writes & wait a bit */
+	(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
+}
+
+static void pangea_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+	u32 temp;
+
+	MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+				KL0_SCC_CELL_ENABLE |
+				KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE);
+
+	MACIO_BIC(KEYLARGO_FCR1,
+		KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT |
+		KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE |
+		KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+		KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+		KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+		KL1_UIDE_ENABLE);
+	if (pmac_mb.board_flags & PMAC_MB_MOBILE)
+		MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
+
+	MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT);
+
+	temp = MACIO_IN32(KEYLARGO_FCR3);
+	temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 |
+		KL3_SHUTDOWN_PLLKW35;
+	temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE
+		| KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE);
+	if (sleep_mode)
+		temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE);
+	MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+	/* Flush posted writes & wait a bit */
+	(void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1);
+}
+
+static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode)
+{
+	u32 temp;
+
+	MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE |
+		  KL0_SCC_CELL_ENABLE);
+
+	MACIO_BIC(KEYLARGO_FCR1,
+		KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT |
+		KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE |
+		KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE |
+		KL1_EIDE0_ENABLE);
+	if (pmac_mb.board_flags & PMAC_MB_MOBILE)
+		MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N);
+
+	temp = MACIO_IN32(KEYLARGO_FCR3);
+	temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE |
+		  KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE);
+	if (sleep_mode)
+		temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE);
+	MACIO_OUT32(KEYLARGO_FCR3, temp);
+
+	/* Flush posted writes & wait a bit */
+	(void)MACIO_IN32(KEYLARGO_FCR0);
+	mdelay(10);
+}
+
+
+static int
+core99_sleep(void)
+{
+	struct macio_chip *macio;
+	int i;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+
+	/* We power off the wireless slot in case it was not done
+	 * by the driver. We don't power it on automatically however
+	 */
+	if (macio->flags & MACIO_FLAG_AIRPORT_ON)
+		core99_airport_enable(macio->of_node, 0, 0);
+
+	/* We power off the FW cable. Should be done by the driver... */
+	if (macio->flags & MACIO_FLAG_FW_SUPPORTED) {
+		core99_firewire_enable(NULL, 0, 0);
+		core99_firewire_cable_power(NULL, 0, 0);
+	}
+
+	/* We make sure int. modem is off (in case driver lost it) */
+	if (macio->type == macio_keylargo)
+		core99_modem_enable(macio->of_node, 0, 0);
+	else
+		pangea_modem_enable(macio->of_node, 0, 0);
+
+	/* We make sure the sound is off as well */
+	core99_sound_chip_enable(macio->of_node, 0, 0);
+
+	/*
+	 * Save various bits of KeyLargo
+	 */
+
+	/* Save the state of the various GPIOs */
+	save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0);
+	save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1);
+	for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
+		save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i);
+	for (i=0; i<KEYLARGO_GPIO_CNT; i++)
+		save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i);
+
+	/* Save the FCRs */
+	if (macio->type == macio_keylargo)
+		save_mbcr = MACIO_IN32(KEYLARGO_MBCR);
+	save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0);
+	save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1);
+	save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2);
+	save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3);
+	save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4);
+	if (macio->type == macio_pangea || macio->type == macio_intrepid)
+		save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5);
+
+	/* Save state & config of DBDMA channels */
+	dbdma_save(macio, save_dbdma);
+
+	/*
+	 * Turn off as much as we can
+	 */
+	if (macio->type == macio_pangea)
+		pangea_shutdown(macio, 1);
+	else if (macio->type == macio_intrepid)
+		intrepid_shutdown(macio, 1);
+	else if (macio->type == macio_keylargo)
+		keylargo_shutdown(macio, 1);
+
+	/*
+	 * Put the host bridge to sleep
+	 */
+
+	save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL);
+	/* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it
+	 * enabled !
+	 */
+	UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl &
+	       ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/));
+	udelay(100);
+	UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
+	UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP);
+	mdelay(10);
+
+	/*
+	 * FIXME: A bit of black magic with OpenPIC (don't ask me why)
+	 */
+	if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
+		MACIO_BIS(0x506e0, 0x00400000);
+		MACIO_BIS(0x506e0, 0x80000000);
+	}
+	return 0;
+}
+
+static int
+core99_wake_up(void)
+{
+	struct macio_chip *macio;
+	int i;
+
+	macio = &macio_chips[0];
+	if (macio->type != macio_keylargo && macio->type != macio_pangea &&
+	    macio->type != macio_intrepid)
+		return -ENODEV;
+
+	/*
+	 * Wakeup the host bridge
+	 */
+	UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
+	udelay(10);
+	UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
+	udelay(10);
+
+	/*
+	 * Restore KeyLargo
+	 */
+
+	if (macio->type == macio_keylargo) {
+		MACIO_OUT32(KEYLARGO_MBCR, save_mbcr);
+		(void)MACIO_IN32(KEYLARGO_MBCR); udelay(10);
+	}
+	MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]);
+	(void)MACIO_IN32(KEYLARGO_FCR0); udelay(10);
+	MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]);
+	(void)MACIO_IN32(KEYLARGO_FCR1); udelay(10);
+	MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]);
+	(void)MACIO_IN32(KEYLARGO_FCR2); udelay(10);
+	MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]);
+	(void)MACIO_IN32(KEYLARGO_FCR3); udelay(10);
+	MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]);
+	(void)MACIO_IN32(KEYLARGO_FCR4); udelay(10);
+	if (macio->type == macio_pangea || macio->type == macio_intrepid) {
+		MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]);
+		(void)MACIO_IN32(KEYLARGO_FCR5); udelay(10);
+	}
+
+	dbdma_restore(macio, save_dbdma);
+
+	MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]);
+	MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]);
+	for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++)
+		MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]);
+	for (i=0; i<KEYLARGO_GPIO_CNT; i++)
+		MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]);
+
+	/* FIXME more black magic with OpenPIC ... */
+	if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) {
+		MACIO_BIC(0x506e0, 0x00400000);
+		MACIO_BIC(0x506e0, 0x80000000);
+	}
+
+	UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl);
+	udelay(100);
+
+	return 0;
+}
+
+#endif /* CONFIG_PM */
+
+static long
+core99_sleep_state(struct device_node *node, long param, long value)
+{
+	/* Param == 1 means to enter the "fake sleep" mode that is
+	 * used for CPU speed switch
+	 */
+	if (param == 1) {
+		if (value == 1) {
+			UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING);
+			UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2);
+		} else {
+			UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL);
+			udelay(10);
+			UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING);
+			udelay(10);
+		}
+		return 0;
+	}
+	if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0)
+		return -EPERM;
+
+#ifdef CONFIG_PM
+	if (value == 1)
+		return core99_sleep();
+	else if (value == 0)
+		return core99_wake_up();
+
+#endif /* CONFIG_PM */
+	return 0;
+}
+
+#endif /* CONFIG_PPC64 */
+
+static long
+generic_dev_can_wake(struct device_node *node, long param, long value)
+{
+	/* Todo: eventually check we are really dealing with on-board
+	 * video device ...
+	 */
+
+	if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP)
+		pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP;
+	return 0;
+}
+
+static long generic_get_mb_info(struct device_node *node, long param, long value)
+{
+	switch(param) {
+		case PMAC_MB_INFO_MODEL:
+			return pmac_mb.model_id;
+		case PMAC_MB_INFO_FLAGS:
+			return pmac_mb.board_flags;
+		case PMAC_MB_INFO_NAME:
+			/* hack hack hack... but should work */
+			*((const char **)value) = pmac_mb.model_name;
+			return 0;
+	}
+	return -EINVAL;
+}
+
+
+/*
+ * Table definitions
+ */
+
+/* Used on any machine
+ */
+static struct feature_table_entry any_features[] = {
+	{ PMAC_FTR_GET_MB_INFO,		generic_get_mb_info },
+	{ PMAC_FTR_DEVICE_CAN_WAKE,	generic_dev_can_wake },
+	{ 0, NULL }
+};
+
+#ifndef CONFIG_PPC64
+
+/* OHare based motherboards. Currently, we only use these on the
+ * 2400,3400 and 3500 series powerbooks. Some older desktops seem
+ * to have issues with turning on/off those asic cells
+ */
+static struct feature_table_entry ohare_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		ohare_htw_scc_enable },
+	{ PMAC_FTR_SWIM3_ENABLE,	ohare_floppy_enable },
+	{ PMAC_FTR_MESH_ENABLE,		ohare_mesh_enable },
+	{ PMAC_FTR_IDE_ENABLE,		ohare_ide_enable},
+	{ PMAC_FTR_IDE_RESET,		ohare_ide_reset},
+	{ PMAC_FTR_SLEEP_STATE,		ohare_sleep_state },
+	{ 0, NULL }
+};
+
+/* Heathrow desktop machines (Beige G3).
+ * Separated as some features couldn't be properly tested
+ * and the serial port control bits appear to confuse it.
+ */
+static struct feature_table_entry heathrow_desktop_features[] = {
+	{ PMAC_FTR_SWIM3_ENABLE,	heathrow_floppy_enable },
+	{ PMAC_FTR_MESH_ENABLE,		heathrow_mesh_enable },
+	{ PMAC_FTR_IDE_ENABLE,		heathrow_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		heathrow_ide_reset },
+	{ PMAC_FTR_BMAC_ENABLE,		heathrow_bmac_enable },
+	{ 0, NULL }
+};
+
+/* Heathrow based laptop, that is the Wallstreet and mainstreet
+ * powerbooks.
+ */
+static struct feature_table_entry heathrow_laptop_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		ohare_htw_scc_enable },
+	{ PMAC_FTR_MODEM_ENABLE,	heathrow_modem_enable },
+	{ PMAC_FTR_SWIM3_ENABLE,	heathrow_floppy_enable },
+	{ PMAC_FTR_MESH_ENABLE,		heathrow_mesh_enable },
+	{ PMAC_FTR_IDE_ENABLE,		heathrow_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		heathrow_ide_reset },
+	{ PMAC_FTR_BMAC_ENABLE,		heathrow_bmac_enable },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	heathrow_sound_enable },
+	{ PMAC_FTR_SLEEP_STATE,		heathrow_sleep_state },
+	{ 0, NULL }
+};
+
+/* Paddington based machines
+ * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4.
+ */
+static struct feature_table_entry paddington_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		ohare_htw_scc_enable },
+	{ PMAC_FTR_MODEM_ENABLE,	heathrow_modem_enable },
+	{ PMAC_FTR_SWIM3_ENABLE,	heathrow_floppy_enable },
+	{ PMAC_FTR_MESH_ENABLE,		heathrow_mesh_enable },
+	{ PMAC_FTR_IDE_ENABLE,		heathrow_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		heathrow_ide_reset },
+	{ PMAC_FTR_BMAC_ENABLE,		heathrow_bmac_enable },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	heathrow_sound_enable },
+	{ PMAC_FTR_SLEEP_STATE,		heathrow_sleep_state },
+	{ 0, NULL }
+};
+
+/* Core99 & MacRISC 2 machines (all machines released since the
+ * iBook (included), that is all AGP machines, except pangea
+ * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo
+ * used on iBook2 & iMac "flow power".
+ */
+static struct feature_table_entry core99_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
+	{ PMAC_FTR_MODEM_ENABLE,	core99_modem_enable },
+	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		core99_ide_reset },
+	{ PMAC_FTR_GMAC_ENABLE,		core99_gmac_enable },
+	{ PMAC_FTR_GMAC_PHY_RESET,	core99_gmac_phy_reset },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	core99_sound_chip_enable },
+	{ PMAC_FTR_AIRPORT_ENABLE,	core99_airport_enable },
+	{ PMAC_FTR_USB_ENABLE,		core99_usb_enable },
+	{ PMAC_FTR_1394_ENABLE,		core99_firewire_enable },
+	{ PMAC_FTR_1394_CABLE_POWER,	core99_firewire_cable_power },
+#ifdef CONFIG_PM
+	{ PMAC_FTR_SLEEP_STATE,		core99_sleep_state },
+#endif
+#ifdef CONFIG_SMP
+	{ PMAC_FTR_RESET_CPU,		core99_reset_cpu },
+#endif /* CONFIG_SMP */
+	{ PMAC_FTR_READ_GPIO,		core99_read_gpio },
+	{ PMAC_FTR_WRITE_GPIO,		core99_write_gpio },
+	{ 0, NULL }
+};
+
+/* RackMac
+ */
+static struct feature_table_entry rackmac_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
+	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		core99_ide_reset },
+	{ PMAC_FTR_GMAC_ENABLE,		core99_gmac_enable },
+	{ PMAC_FTR_GMAC_PHY_RESET,	core99_gmac_phy_reset },
+	{ PMAC_FTR_USB_ENABLE,		core99_usb_enable },
+	{ PMAC_FTR_1394_ENABLE,		core99_firewire_enable },
+	{ PMAC_FTR_1394_CABLE_POWER,	core99_firewire_cable_power },
+	{ PMAC_FTR_SLEEP_STATE,		core99_sleep_state },
+#ifdef CONFIG_SMP
+	{ PMAC_FTR_RESET_CPU,		core99_reset_cpu },
+#endif /* CONFIG_SMP */
+	{ PMAC_FTR_READ_GPIO,		core99_read_gpio },
+	{ PMAC_FTR_WRITE_GPIO,		core99_write_gpio },
+	{ 0, NULL }
+};
+
+/* Pangea features
+ */
+static struct feature_table_entry pangea_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
+	{ PMAC_FTR_MODEM_ENABLE,	pangea_modem_enable },
+	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		core99_ide_reset },
+	{ PMAC_FTR_GMAC_ENABLE,		core99_gmac_enable },
+	{ PMAC_FTR_GMAC_PHY_RESET,	core99_gmac_phy_reset },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	core99_sound_chip_enable },
+	{ PMAC_FTR_AIRPORT_ENABLE,	core99_airport_enable },
+	{ PMAC_FTR_USB_ENABLE,		core99_usb_enable },
+	{ PMAC_FTR_1394_ENABLE,		core99_firewire_enable },
+	{ PMAC_FTR_1394_CABLE_POWER,	core99_firewire_cable_power },
+	{ PMAC_FTR_SLEEP_STATE,		core99_sleep_state },
+	{ PMAC_FTR_READ_GPIO,		core99_read_gpio },
+	{ PMAC_FTR_WRITE_GPIO,		core99_write_gpio },
+	{ 0, NULL }
+};
+
+/* Intrepid features
+ */
+static struct feature_table_entry intrepid_features[] = {
+	{ PMAC_FTR_SCC_ENABLE,		core99_scc_enable },
+	{ PMAC_FTR_MODEM_ENABLE,	pangea_modem_enable },
+	{ PMAC_FTR_IDE_ENABLE,		core99_ide_enable },
+	{ PMAC_FTR_IDE_RESET,		core99_ide_reset },
+	{ PMAC_FTR_GMAC_ENABLE,		core99_gmac_enable },
+	{ PMAC_FTR_GMAC_PHY_RESET,	core99_gmac_phy_reset },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	core99_sound_chip_enable },
+	{ PMAC_FTR_AIRPORT_ENABLE,	core99_airport_enable },
+	{ PMAC_FTR_USB_ENABLE,		core99_usb_enable },
+	{ PMAC_FTR_1394_ENABLE,		core99_firewire_enable },
+	{ PMAC_FTR_1394_CABLE_POWER,	core99_firewire_cable_power },
+	{ PMAC_FTR_SLEEP_STATE,		core99_sleep_state },
+	{ PMAC_FTR_READ_GPIO,		core99_read_gpio },
+	{ PMAC_FTR_WRITE_GPIO,		core99_write_gpio },
+	{ PMAC_FTR_AACK_DELAY_ENABLE,	intrepid_aack_delay_enable },
+	{ 0, NULL }
+};
+
+#else /* CONFIG_PPC64 */
+
+/* G5 features
+ */
+static struct feature_table_entry g5_features[] = {
+	{ PMAC_FTR_GMAC_ENABLE,		g5_gmac_enable },
+	{ PMAC_FTR_1394_ENABLE,		g5_fw_enable },
+	{ PMAC_FTR_ENABLE_MPIC,		g5_mpic_enable },
+	{ PMAC_FTR_GMAC_PHY_RESET,	g5_eth_phy_reset },
+	{ PMAC_FTR_SOUND_CHIP_ENABLE,	g5_i2s_enable },
+#ifdef CONFIG_SMP
+	{ PMAC_FTR_RESET_CPU,		g5_reset_cpu },
+#endif /* CONFIG_SMP */
+	{ PMAC_FTR_READ_GPIO,		core99_read_gpio },
+	{ PMAC_FTR_WRITE_GPIO,		core99_write_gpio },
+	{ 0, NULL }
+};
+
+#endif /* CONFIG_PPC64 */
+
+static struct pmac_mb_def pmac_mb_defs[] = {
+#ifndef CONFIG_PPC64
+	/*
+	 * Desktops
+	 */
+
+	{	"AAPL,8500",			"PowerMac 8500/8600",
+		PMAC_TYPE_PSURGE,		NULL,
+		0
+	},
+	{	"AAPL,9500",			"PowerMac 9500/9600",
+		PMAC_TYPE_PSURGE,		NULL,
+		0
+	},
+	{	"AAPL,7200",			"PowerMac 7200",
+		PMAC_TYPE_PSURGE,		NULL,
+		0
+	},
+	{	"AAPL,7300",			"PowerMac 7200/7300",
+		PMAC_TYPE_PSURGE,		NULL,
+		0
+	},
+	{	"AAPL,7500",			"PowerMac 7500",
+		PMAC_TYPE_PSURGE,		NULL,
+		0
+	},
+	{	"AAPL,ShinerESB",		"Apple Network Server",
+		PMAC_TYPE_ANS,			NULL,
+		0
+	},
+	{	"AAPL,e407",			"Alchemy",
+		PMAC_TYPE_ALCHEMY,		NULL,
+		0
+	},
+	{	"AAPL,e411",			"Gazelle",
+		PMAC_TYPE_GAZELLE,		NULL,
+		0
+	},
+	{	"AAPL,Gossamer",		"PowerMac G3 (Gossamer)",
+		PMAC_TYPE_GOSSAMER,		heathrow_desktop_features,
+		0
+	},
+	{	"AAPL,PowerMac G3",		"PowerMac G3 (Silk)",
+		PMAC_TYPE_SILK,			heathrow_desktop_features,
+		0
+	},
+	{	"PowerMac1,1",			"Blue&White G3",
+		PMAC_TYPE_YOSEMITE,		paddington_features,
+		0
+	},
+	{	"PowerMac1,2",			"PowerMac G4 PCI Graphics",
+		PMAC_TYPE_YIKES,		paddington_features,
+		0
+	},
+	{	"PowerMac2,1",			"iMac FireWire",
+		PMAC_TYPE_FW_IMAC,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac2,2",			"iMac FireWire",
+		PMAC_TYPE_FW_IMAC,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac3,1",			"PowerMac G4 AGP Graphics",
+		PMAC_TYPE_SAWTOOTH,		core99_features,
+		PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac3,2",			"PowerMac G4 AGP Graphics",
+		PMAC_TYPE_SAWTOOTH,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac3,3",			"PowerMac G4 AGP Graphics",
+		PMAC_TYPE_SAWTOOTH,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac3,4",			"PowerMac G4 Silver",
+		PMAC_TYPE_QUICKSILVER,		core99_features,
+		PMAC_MB_MAY_SLEEP
+	},
+	{	"PowerMac3,5",			"PowerMac G4 Silver",
+		PMAC_TYPE_QUICKSILVER,		core99_features,
+		PMAC_MB_MAY_SLEEP
+	},
+	{	"PowerMac3,6",			"PowerMac G4 Windtunnel",
+		PMAC_TYPE_WINDTUNNEL,		core99_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+	{	"PowerMac4,1",			"iMac \"Flower Power\"",
+		PMAC_TYPE_PANGEA_IMAC,		pangea_features,
+		PMAC_MB_MAY_SLEEP
+	},
+	{	"PowerMac4,2",			"Flat panel iMac",
+		PMAC_TYPE_FLAT_PANEL_IMAC,	pangea_features,
+		PMAC_MB_CAN_SLEEP
+	},
+	{	"PowerMac4,4",			"eMac",
+		PMAC_TYPE_EMAC,			core99_features,
+		PMAC_MB_MAY_SLEEP
+	},
+	{	"PowerMac5,1",			"PowerMac G4 Cube",
+		PMAC_TYPE_CUBE,			core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99
+	},
+	{	"PowerMac6,1",			"Flat panel iMac",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+	{	"PowerMac6,3",			"Flat panel iMac",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+	{	"PowerMac6,4",			"eMac",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+	{	"PowerMac10,1",			"Mac mini",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+	{       "PowerMac10,2",                 "Mac mini (Late 2005)",
+		PMAC_TYPE_UNKNOWN_INTREPID,     intrepid_features,
+		PMAC_MB_MAY_SLEEP,
+	},
+ 	{	"iMac,1",			"iMac (first generation)",
+		PMAC_TYPE_ORIG_IMAC,		paddington_features,
+		0
+	},
+
+	/*
+	 * Xserve's
+	 */
+
+	{	"RackMac1,1",			"XServe",
+		PMAC_TYPE_RACKMAC,		rackmac_features,
+		0,
+	},
+	{	"RackMac1,2",			"XServe rev. 2",
+		PMAC_TYPE_RACKMAC,		rackmac_features,
+		0,
+	},
+
+	/*
+	 * Laptops
+	 */
+
+	{	"AAPL,3400/2400",		"PowerBook 3400",
+		PMAC_TYPE_HOOPER,		ohare_features,
+		PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+	},
+	{	"AAPL,3500",			"PowerBook 3500",
+		PMAC_TYPE_KANGA,		ohare_features,
+		PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+	},
+	{	"AAPL,PowerBook1998",		"PowerBook Wallstreet",
+		PMAC_TYPE_WALLSTREET,		heathrow_laptop_features,
+		PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+	},
+	{	"PowerBook1,1",			"PowerBook 101 (Lombard)",
+		PMAC_TYPE_101_PBOOK,		paddington_features,
+		PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE
+	},
+	{	"PowerBook2,1",			"iBook (first generation)",
+		PMAC_TYPE_ORIG_IBOOK,		core99_features,
+		PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+	},
+	{	"PowerBook2,2",			"iBook FireWire",
+		PMAC_TYPE_FW_IBOOK,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
+		PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+	},
+	{	"PowerBook3,1",			"PowerBook Pismo",
+		PMAC_TYPE_PISMO,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER |
+		PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE
+	},
+	{	"PowerBook3,2",			"PowerBook Titanium",
+		PMAC_TYPE_TITANIUM,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook3,3",			"PowerBook Titanium II",
+		PMAC_TYPE_TITANIUM2,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook3,4",			"PowerBook Titanium III",
+		PMAC_TYPE_TITANIUM3,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook3,5",			"PowerBook Titanium IV",
+		PMAC_TYPE_TITANIUM4,		core99_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook4,1",			"iBook 2",
+		PMAC_TYPE_IBOOK2,		pangea_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook4,2",			"iBook 2",
+		PMAC_TYPE_IBOOK2,		pangea_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook4,3",			"iBook 2 rev. 2",
+		PMAC_TYPE_IBOOK2,		pangea_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE
+	},
+	{	"PowerBook5,1",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,2",			"PowerBook G4 15\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,3",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,4",			"PowerBook G4 15\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,5",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,6",			"PowerBook G4 15\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,7",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,8",			"PowerBook G4 15\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP  | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook5,9",			"PowerBook G4 17\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,1",			"PowerBook G4 12\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,2",			"PowerBook G4",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,3",			"iBook G4",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,4",			"PowerBook G4 12\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,5",			"iBook G4",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,7",			"iBook G4",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+	{	"PowerBook6,8",			"PowerBook G4 12\"",
+		PMAC_TYPE_UNKNOWN_INTREPID,	intrepid_features,
+		PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE,
+	},
+#else /* CONFIG_PPC64 */
+	{	"PowerMac7,2",			"PowerMac G5",
+		PMAC_TYPE_POWERMAC_G5,		g5_features,
+		0,
+	},
+#ifdef CONFIG_PPC64
+	{	"PowerMac7,3",			"PowerMac G5",
+		PMAC_TYPE_POWERMAC_G5,		g5_features,
+		0,
+	},
+	{	"PowerMac8,1",			"iMac G5",
+		PMAC_TYPE_IMAC_G5,		g5_features,
+		0,
+	},
+	{	"PowerMac9,1",			"PowerMac G5",
+		PMAC_TYPE_POWERMAC_G5_U3L,	g5_features,
+		0,
+	},
+	{	"PowerMac11,2",			"PowerMac G5 Dual Core",
+		PMAC_TYPE_POWERMAC_G5_U3L,	g5_features,
+		0,
+	},
+	{	"PowerMac12,1",			"iMac G5 (iSight)",
+		PMAC_TYPE_POWERMAC_G5_U3L,	g5_features,
+		0,
+	},
+	{       "RackMac3,1",                   "XServe G5",
+		PMAC_TYPE_XSERVE_G5,		g5_features,
+		0,
+	},
+#endif /* CONFIG_PPC64 */
+#endif /* CONFIG_PPC64 */
+};
+
+/*
+ * The toplevel feature_call callback
+ */
+long pmac_do_feature_call(unsigned int selector, ...)
+{
+	struct device_node *node;
+	long param, value;
+	int i;
+	feature_call func = NULL;
+	va_list args;
+
+	if (pmac_mb.features)
+		for (i=0; pmac_mb.features[i].function; i++)
+			if (pmac_mb.features[i].selector == selector) {
+				func = pmac_mb.features[i].function;
+				break;
+			}
+	if (!func)
+		for (i=0; any_features[i].function; i++)
+			if (any_features[i].selector == selector) {
+				func = any_features[i].function;
+				break;
+			}
+	if (!func)
+		return -ENODEV;
+
+	va_start(args, selector);
+	node = (struct device_node*)va_arg(args, void*);
+	param = va_arg(args, long);
+	value = va_arg(args, long);
+	va_end(args);
+
+	return func(node, param, value);
+}
+
+static int __init probe_motherboard(void)
+{
+	int i;
+	struct macio_chip *macio = &macio_chips[0];
+	const char *model = NULL;
+	struct device_node *dt;
+	int ret = 0;
+
+	/* Lookup known motherboard type in device-tree. First try an
+	 * exact match on the "model" property, then try a "compatible"
+	 * match is none is found.
+	 */
+	dt = of_find_node_by_name(NULL, "device-tree");
+	if (dt != NULL)
+		model = of_get_property(dt, "model", NULL);
+	for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) {
+	    if (strcmp(model, pmac_mb_defs[i].model_string) == 0) {
+		pmac_mb = pmac_mb_defs[i];
+		goto found;
+	    }
+	}
+	for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) {
+	    if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) {
+		pmac_mb = pmac_mb_defs[i];
+		goto found;
+	    }
+	}
+
+	/* Fallback to selection depending on mac-io chip type */
+	switch(macio->type) {
+#ifndef CONFIG_PPC64
+	    case macio_grand_central:
+		pmac_mb.model_id = PMAC_TYPE_PSURGE;
+		pmac_mb.model_name = "Unknown PowerSurge";
+		break;
+	    case macio_ohare:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE;
+		pmac_mb.model_name = "Unknown OHare-based";
+		break;
+	    case macio_heathrow:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW;
+		pmac_mb.model_name = "Unknown Heathrow-based";
+		pmac_mb.features = heathrow_desktop_features;
+		break;
+	    case macio_paddington:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON;
+		pmac_mb.model_name = "Unknown Paddington-based";
+		pmac_mb.features = paddington_features;
+		break;
+	    case macio_keylargo:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99;
+		pmac_mb.model_name = "Unknown Keylargo-based";
+		pmac_mb.features = core99_features;
+		break;
+	    case macio_pangea:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA;
+		pmac_mb.model_name = "Unknown Pangea-based";
+		pmac_mb.features = pangea_features;
+		break;
+	    case macio_intrepid:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID;
+		pmac_mb.model_name = "Unknown Intrepid-based";
+		pmac_mb.features = intrepid_features;
+		break;
+#else /* CONFIG_PPC64 */
+	case macio_keylargo2:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2;
+		pmac_mb.model_name = "Unknown K2-based";
+		pmac_mb.features = g5_features;
+		break;
+	case macio_shasta:
+		pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA;
+		pmac_mb.model_name = "Unknown Shasta-based";
+		pmac_mb.features = g5_features;
+		break;
+#endif /* CONFIG_PPC64 */
+	default:
+		ret = -ENODEV;
+		goto done;
+	}
+found:
+#ifndef CONFIG_PPC64
+	/* Fixup Hooper vs. Comet */
+	if (pmac_mb.model_id == PMAC_TYPE_HOOPER) {
+		u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4);
+		if (!mach_id_ptr) {
+			ret = -ENODEV;
+			goto done;
+		}
+		/* Here, I used to disable the media-bay on comet. It
+		 * appears this is wrong, the floppy connector is actually
+		 * a kind of media-bay and works with the current driver.
+		 */
+		if (__raw_readl(mach_id_ptr) & 0x20000000UL)
+			pmac_mb.model_id = PMAC_TYPE_COMET;
+		iounmap(mach_id_ptr);
+	}
+
+	/* Set default value of powersave_nap on machines that support it.
+	 * It appears that uninorth rev 3 has a problem with it, we don't
+	 * enable it on those. In theory, the flush-on-lock property is
+	 * supposed to be set when not supported, but I'm not very confident
+	 * that all Apple OF revs did it properly, I do it the paranoid way.
+	 */
+	if (uninorth_base && uninorth_rev > 3) {
+		struct device_node *np;
+
+		for_each_of_cpu_node(np) {
+			int cpu_count = 1;
+
+			/* Nap mode not supported on SMP */
+			if (of_get_property(np, "flush-on-lock", NULL) ||
+			    (cpu_count > 1)) {
+				powersave_nap = 0;
+				of_node_put(np);
+				break;
+			}
+
+			cpu_count++;
+			powersave_nap = 1;
+		}
+	}
+	if (powersave_nap)
+		printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
+
+	/* On CPUs that support it (750FX), lowspeed by default during
+	 * NAP mode
+	 */
+	powersave_lowspeed = 1;
+
+#else /* CONFIG_PPC64 */
+	powersave_nap = 1;
+#endif  /* CONFIG_PPC64 */
+
+	/* Check for "mobile" machine */
+	if (model && (strncmp(model, "PowerBook", 9) == 0
+		   || strncmp(model, "iBook", 5) == 0))
+		pmac_mb.board_flags |= PMAC_MB_MOBILE;
+
+
+	printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
+done:
+	of_node_put(dt);
+	return ret;
+}
+
+/* Initialize the Core99 UniNorth host bridge and memory controller
+ */
+static void __init probe_uninorth(void)
+{
+	const u32 *addrp;
+	phys_addr_t address;
+	unsigned long actrl;
+
+	/* Locate core99 Uni-N */
+	uninorth_node = of_find_node_by_name(NULL, "uni-n");
+	uninorth_maj = 1;
+
+	/* Locate G5 u3 */
+	if (uninorth_node == NULL) {
+		uninorth_node = of_find_node_by_name(NULL, "u3");
+		uninorth_maj = 3;
+	}
+	/* Locate G5 u4 */
+	if (uninorth_node == NULL) {
+		uninorth_node = of_find_node_by_name(NULL, "u4");
+		uninorth_maj = 4;
+	}
+	if (uninorth_node == NULL) {
+		uninorth_maj = 0;
+		return;
+	}
+
+	addrp = of_get_property(uninorth_node, "reg", NULL);
+	if (addrp == NULL)
+		return;
+	address = of_translate_address(uninorth_node, addrp);
+	if (address == 0)
+		return;
+	uninorth_base = ioremap(address, 0x40000);
+	if (uninorth_base == NULL)
+		return;
+	uninorth_rev = in_be32(UN_REG(UNI_N_VERSION));
+	if (uninorth_maj == 3 || uninorth_maj == 4) {
+		u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000);
+		if (u3_ht_base == NULL) {
+			iounmap(uninorth_base);
+			return;
+		}
+	}
+
+	printk(KERN_INFO "Found %s memory controller & host bridge"
+	       " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" :
+	       uninorth_maj == 4 ? "U4" : "UniNorth",
+	       (unsigned int)address, uninorth_rev);
+	printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
+
+	/* Set the arbitrer QAck delay according to what Apple does
+	 */
+	if (uninorth_rev < 0x11) {
+		actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK;
+		actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 :
+			UNI_N_ARB_CTRL_QACK_DELAY) <<
+			UNI_N_ARB_CTRL_QACK_DELAY_SHIFT;
+		UN_OUT(UNI_N_ARB_CTRL, actrl);
+	}
+
+	/* Some more magic as done by them in recent MacOS X on UniNorth
+	 * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI
+	 * memory timeout
+	 */
+	if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) ||
+	    uninorth_rev == 0xc0)
+		UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff);
+}
+
+static void __init probe_one_macio(const char *name, const char *compat, int type)
+{
+	struct device_node*	node;
+	int			i;
+	volatile u32 __iomem	*base;
+	const u32		*addrp, *revp;
+	phys_addr_t		addr;
+	u64			size;
+
+	for_each_node_by_name(node, name) {
+		if (!compat)
+			break;
+		if (of_device_is_compatible(node, compat))
+			break;
+	}
+	if (!node)
+		return;
+	for(i=0; i<MAX_MACIO_CHIPS; i++) {
+		if (!macio_chips[i].of_node)
+			break;
+		if (macio_chips[i].of_node == node)
+			return;
+	}
+
+	if (i >= MAX_MACIO_CHIPS) {
+		printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
+		printk(KERN_ERR "pmac_feature: %pOF skipped\n", node);
+		return;
+	}
+	addrp = of_get_pci_address(node, 0, &size, NULL);
+	if (addrp == NULL) {
+		printk(KERN_ERR "pmac_feature: %pOF: can't find base !\n",
+		       node);
+		return;
+	}
+	addr = of_translate_address(node, addrp);
+	if (addr == 0) {
+		printk(KERN_ERR "pmac_feature: %pOF, can't translate base !\n",
+		       node);
+		return;
+	}
+	base = ioremap(addr, (unsigned long)size);
+	if (!base) {
+		printk(KERN_ERR "pmac_feature: %pOF, can't map mac-io chip !\n",
+		       node);
+		return;
+	}
+	if (type == macio_keylargo || type == macio_keylargo2) {
+		const u32 *did = of_get_property(node, "device-id", NULL);
+		if (*did == 0x00000025)
+			type = macio_pangea;
+		if (*did == 0x0000003e)
+			type = macio_intrepid;
+		if (*did == 0x0000004f)
+			type = macio_shasta;
+	}
+	macio_chips[i].of_node	= node;
+	macio_chips[i].type	= type;
+	macio_chips[i].base	= base;
+	macio_chips[i].flags	= MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON;
+	macio_chips[i].name	= macio_names[type];
+	revp = of_get_property(node, "revision-id", NULL);
+	if (revp)
+		macio_chips[i].rev = *revp;
+	printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
+		macio_names[type], macio_chips[i].rev, macio_chips[i].base);
+}
+
+static int __init
+probe_macios(void)
+{
+	/* Warning, ordering is important */
+	probe_one_macio("gc", NULL, macio_grand_central);
+	probe_one_macio("ohare", NULL, macio_ohare);
+	probe_one_macio("pci106b,7", NULL, macio_ohareII);
+	probe_one_macio("mac-io", "keylargo", macio_keylargo);
+	probe_one_macio("mac-io", "paddington", macio_paddington);
+	probe_one_macio("mac-io", "gatwick", macio_gatwick);
+	probe_one_macio("mac-io", "heathrow", macio_heathrow);
+	probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2);
+
+	/* Make sure the "main" macio chip appear first */
+	if (macio_chips[0].type == macio_gatwick
+	    && macio_chips[1].type == macio_heathrow) {
+		struct macio_chip temp = macio_chips[0];
+		macio_chips[0] = macio_chips[1];
+		macio_chips[1] = temp;
+	}
+	if (macio_chips[0].type == macio_ohareII
+	    && macio_chips[1].type == macio_ohare) {
+		struct macio_chip temp = macio_chips[0];
+		macio_chips[0] = macio_chips[1];
+		macio_chips[1] = temp;
+	}
+	macio_chips[0].lbus.index = 0;
+	macio_chips[1].lbus.index = 1;
+
+	return (macio_chips[0].of_node == NULL) ? -ENODEV : 0;
+}
+
+static void __init
+initial_serial_shutdown(struct device_node *np)
+{
+	int len;
+	const struct slot_names_prop {
+		int	count;
+		char	name[1];
+	} *slots;
+	const char *conn;
+	int port_type = PMAC_SCC_ASYNC;
+	int modem = 0;
+
+	slots = of_get_property(np, "slot-names", &len);
+	conn = of_get_property(np, "AAPL,connector", &len);
+	if (conn && (strcmp(conn, "infrared") == 0))
+		port_type = PMAC_SCC_IRDA;
+	else if (of_device_is_compatible(np, "cobalt"))
+		modem = 1;
+	else if (slots && slots->count > 0) {
+		if (strcmp(slots->name, "IrDA") == 0)
+			port_type = PMAC_SCC_IRDA;
+		else if (strcmp(slots->name, "Modem") == 0)
+			modem = 1;
+	}
+	if (modem)
+		pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0);
+	pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0);
+}
+
+static void __init
+set_initial_features(void)
+{
+	struct device_node *np;
+
+	/* That hack appears to be necessary for some StarMax motherboards
+	 * but I'm not too sure it was audited for side-effects on other
+	 * ohare based machines...
+	 * Since I still have difficulties figuring the right way to
+	 * differentiate them all and since that hack was there for a long
+	 * time, I'll keep it around
+	 */
+	if (macio_chips[0].type == macio_ohare) {
+		struct macio_chip *macio = &macio_chips[0];
+		np = of_find_node_by_name(NULL, "via-pmu");
+		if (np)
+			MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+		else
+			MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES);
+		of_node_put(np);
+	} else if (macio_chips[1].type == macio_ohare) {
+		struct macio_chip *macio = &macio_chips[1];
+		MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE);
+	}
+
+#ifdef CONFIG_PPC64
+	if (macio_chips[0].type == macio_keylargo2 ||
+	    macio_chips[0].type == macio_shasta) {
+#ifndef CONFIG_SMP
+		/* On SMP machines running UP, we have the second CPU eating
+		 * bus cycles. We need to take it off the bus. This is done
+		 * from pmac_smp for SMP kernels running on one CPU
+		 */
+		np = of_find_node_by_type(NULL, "cpu");
+		if (np != NULL)
+			np = of_find_node_by_type(np, "cpu");
+		if (np != NULL) {
+			g5_phy_disable_cpu1();
+			of_node_put(np);
+		}
+#endif /* CONFIG_SMP */
+		/* Enable GMAC for now for PCI probing. It will be disabled
+		 * later on after PCI probe
+		 */
+		for_each_node_by_name(np, "ethernet")
+			if (of_device_is_compatible(np, "K2-GMAC"))
+				g5_gmac_enable(np, 0, 1);
+
+		/* Enable FW before PCI probe. Will be disabled later on
+		 * Note: We should have a batter way to check that we are
+		 * dealing with uninorth internal cell and not a PCI cell
+		 * on the external PCI. The code below works though.
+		 */
+		for_each_node_by_name(np, "firewire") {
+			if (of_device_is_compatible(np, "pci106b,5811")) {
+				macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
+				g5_fw_enable(np, 0, 1);
+			}
+		}
+	}
+#else /* CONFIG_PPC64 */
+
+	if (macio_chips[0].type == macio_keylargo ||
+	    macio_chips[0].type == macio_pangea ||
+	    macio_chips[0].type == macio_intrepid) {
+		/* Enable GMAC for now for PCI probing. It will be disabled
+		 * later on after PCI probe
+		 */
+		for_each_node_by_name(np, "ethernet") {
+			if (np->parent
+			    && of_device_is_compatible(np->parent, "uni-north")
+			    && of_device_is_compatible(np, "gmac"))
+				core99_gmac_enable(np, 0, 1);
+		}
+
+		/* Enable FW before PCI probe. Will be disabled later on
+		 * Note: We should have a batter way to check that we are
+		 * dealing with uninorth internal cell and not a PCI cell
+		 * on the external PCI. The code below works though.
+		 */
+		for_each_node_by_name(np, "firewire") {
+			if (np->parent
+			    && of_device_is_compatible(np->parent, "uni-north")
+			    && (of_device_is_compatible(np, "pci106b,18") ||
+			        of_device_is_compatible(np, "pci106b,30") ||
+			        of_device_is_compatible(np, "pci11c1,5811"))) {
+				macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
+				core99_firewire_enable(np, 0, 1);
+			}
+		}
+
+		/* Enable ATA-100 before PCI probe. */
+		for_each_node_by_name(np, "ata-6") {
+			if (np->parent
+			    && of_device_is_compatible(np->parent, "uni-north")
+			    && of_device_is_compatible(np, "kauai-ata")) {
+				core99_ata100_enable(np, 1);
+			}
+		}
+
+		/* Switch airport off */
+		for_each_node_by_name(np, "radio") {
+			if (np->parent == macio_chips[0].of_node) {
+				macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON;
+				core99_airport_enable(np, 0, 0);
+			}
+		}
+	}
+
+	/* On all machines that support sound PM, switch sound off */
+	if (macio_chips[0].of_node)
+		pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE,
+			macio_chips[0].of_node, 0, 0);
+
+	/* While on some desktop G3s, we turn it back on */
+	if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow
+		&& (pmac_mb.model_id == PMAC_TYPE_GOSSAMER ||
+		    pmac_mb.model_id == PMAC_TYPE_SILK)) {
+		struct macio_chip *macio = &macio_chips[0];
+		MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE);
+		MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N);
+	}
+
+#endif /* CONFIG_PPC64 */
+
+	/* On all machines, switch modem & serial ports off */
+	for_each_node_by_name(np, "ch-a")
+		initial_serial_shutdown(np);
+	for_each_node_by_name(np, "ch-b")
+		initial_serial_shutdown(np);
+}
+
+void __init
+pmac_feature_init(void)
+{
+	/* Detect the UniNorth memory controller */
+	probe_uninorth();
+
+	/* Probe mac-io controllers */
+	if (probe_macios()) {
+		printk(KERN_WARNING "No mac-io chip found\n");
+		return;
+	}
+
+	/* Probe machine type */
+	if (probe_motherboard())
+		printk(KERN_WARNING "Unknown PowerMac !\n");
+
+	/* Set some initial features (turn off some chips that will
+	 * be later turned on)
+	 */
+	set_initial_features();
+}
+
+#if 0
+static void dump_HT_speeds(char *name, u32 cfg, u32 frq)
+{
+	int	freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 };
+	int	bits[8] = { 8,16,0,32,2,4,0,0 };
+	int	freq = (frq >> 8) & 0xf;
+
+	if (freqs[freq] == 0)
+		printk("%s: Unknown HT link frequency %x\n", name, freq);
+	else
+		printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
+		       name, freqs[freq],
+		       bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]);
+}
+
+void __init pmac_check_ht_link(void)
+{
+	u32	ufreq, freq, ucfg, cfg;
+	struct device_node *pcix_node;
+	u8	px_bus, px_devfn;
+	struct pci_controller *px_hose;
+
+	(void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND);
+	ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG);
+	ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ);
+	dump_HT_speeds("U3 HyperTransport", cfg, freq);
+
+	pcix_node = of_find_compatible_node(NULL, "pci", "pci-x");
+	if (pcix_node == NULL) {
+		printk("No PCI-X bridge found\n");
+		return;
+	}
+	if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) {
+		printk("PCI-X bridge found but not matched to pci\n");
+		return;
+	}
+	px_hose = pci_find_hose_for_OF_device(pcix_node);
+	if (px_hose == NULL) {
+		printk("PCI-X bridge found but not matched to host\n");
+		return;
+	}	
+	early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg);
+	early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq);
+	dump_HT_speeds("PCI-X HT Uplink", cfg, freq);
+	early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg);
+	early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq);
+	dump_HT_speeds("PCI-X HT Downlink", cfg, freq);
+}
+#endif /* 0 */
+
+/*
+ * Early video resume hook
+ */
+
+static void (*pmac_early_vresume_proc)(void *data);
+static void *pmac_early_vresume_data;
+
+void pmac_set_early_video_resume(void (*proc)(void *data), void *data)
+{
+	if (!machine_is(powermac))
+		return;
+	preempt_disable();
+	pmac_early_vresume_proc = proc;
+	pmac_early_vresume_data = data;
+	preempt_enable();
+}
+EXPORT_SYMBOL(pmac_set_early_video_resume);
+
+void pmac_call_early_video_resume(void)
+{
+	if (pmac_early_vresume_proc)
+		pmac_early_vresume_proc(pmac_early_vresume_data);
+}
+
+/*
+ * AGP related suspend/resume code
+ */
+
+static struct pci_dev *pmac_agp_bridge;
+static int (*pmac_agp_suspend)(struct pci_dev *bridge);
+static int (*pmac_agp_resume)(struct pci_dev *bridge);
+
+void pmac_register_agp_pm(struct pci_dev *bridge,
+				 int (*suspend)(struct pci_dev *bridge),
+				 int (*resume)(struct pci_dev *bridge))
+{
+	if (suspend || resume) {
+		pmac_agp_bridge = bridge;
+		pmac_agp_suspend = suspend;
+		pmac_agp_resume = resume;
+		return;
+	}
+	if (bridge != pmac_agp_bridge)
+		return;
+	pmac_agp_suspend = pmac_agp_resume = NULL;
+	return;
+}
+EXPORT_SYMBOL(pmac_register_agp_pm);
+
+void pmac_suspend_agp_for_card(struct pci_dev *dev)
+{
+	if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL)
+		return;
+	if (pmac_agp_bridge->bus != dev->bus)
+		return;
+	pmac_agp_suspend(pmac_agp_bridge);
+}
+EXPORT_SYMBOL(pmac_suspend_agp_for_card);
+
+void pmac_resume_agp_for_card(struct pci_dev *dev)
+{
+	if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL)
+		return;
+	if (pmac_agp_bridge->bus != dev->bus)
+		return;
+	pmac_agp_resume(pmac_agp_bridge);
+}
+EXPORT_SYMBOL(pmac_resume_agp_for_card);
+
+int pmac_get_uninorth_variant(void)
+{
+	return uninorth_maj;
+}