Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 364 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
new file mode 100644
index 000000000..739a0b3b7
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -0,0 +1,364 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __POWERNV_PCI_H
+#define __POWERNV_PCI_H
+
+#include <linux/compiler.h>		/* for __printf */
+#include <linux/iommu.h>
+#include <asm/iommu.h>
+#include <asm/msi_bitmap.h>
+
+struct pci_dn;
+
+enum pnv_phb_type {
+	PNV_PHB_IODA1		= 0,
+	PNV_PHB_IODA2		= 1,
+	PNV_PHB_NPU_NVLINK	= 2,
+	PNV_PHB_NPU_OCAPI	= 3,
+};
+
+/* Precise PHB model for error management */
+enum pnv_phb_model {
+	PNV_PHB_MODEL_UNKNOWN,
+	PNV_PHB_MODEL_P7IOC,
+	PNV_PHB_MODEL_PHB3,
+	PNV_PHB_MODEL_NPU,
+	PNV_PHB_MODEL_NPU2,
+};
+
+#define PNV_PCI_DIAG_BUF_SIZE	8192
+#define PNV_IODA_PE_DEV		(1 << 0)	/* PE has single PCI device	*/
+#define PNV_IODA_PE_BUS		(1 << 1)	/* PE has primary PCI bus	*/
+#define PNV_IODA_PE_BUS_ALL	(1 << 2)	/* PE has subordinate buses	*/
+#define PNV_IODA_PE_MASTER	(1 << 3)	/* Master PE in compound case	*/
+#define PNV_IODA_PE_SLAVE	(1 << 4)	/* Slave PE in compound case	*/
+#define PNV_IODA_PE_VF		(1 << 5)	/* PE for one VF 		*/
+
+/*
+ * A brief note on PNV_IODA_PE_BUS_ALL
+ *
+ * This is needed because of the behaviour of PCIe-to-PCI bridges. The PHB uses
+ * the Requester ID field of the PCIe request header to determine the device
+ * (and PE) that initiated a DMA. In legacy PCI individual memory read/write
+ * requests aren't tagged with the RID. To work around this the PCIe-to-PCI
+ * bridge will use (secondary_bus_no << 8) | 0x00 as the RID on the PCIe side.
+ *
+ * PCIe-to-X bridges have a similar issue even though PCI-X requests also have
+ * a RID in the transaction header. The PCIe-to-X bridge is permitted to "take
+ * ownership" of a transaction by a PCI-X device when forwarding it to the PCIe
+ * side of the bridge.
+ *
+ * To work around these problems we use the BUS_ALL flag since every subordinate
+ * bus of the bridge should go into the same PE.
+ */
+
+/* Indicates operations are frozen for a PE: MMIO in PESTA & DMA in PESTB. */
+#define PNV_IODA_STOPPED_STATE	0x8000000000000000
+
+/* Data associated with a PE, including IOMMU tracking etc.. */
+struct pnv_phb;
+struct pnv_ioda_pe {
+	unsigned long		flags;
+	struct pnv_phb		*phb;
+	int			device_count;
+
+	/* A PE can be associated with a single device or an
+	 * entire bus (& children). In the former case, pdev
+	 * is populated, in the later case, pbus is.
+	 */
+#ifdef CONFIG_PCI_IOV
+	struct pci_dev          *parent_dev;
+#endif
+	struct pci_dev		*pdev;
+	struct pci_bus		*pbus;
+
+	/* Effective RID (device RID for a device PE and base bus
+	 * RID with devfn 0 for a bus PE)
+	 */
+	unsigned int		rid;
+
+	/* PE number */
+	unsigned int		pe_number;
+
+	/* "Base" iommu table, ie, 4K TCEs, 32-bit DMA */
+	struct iommu_table_group table_group;
+	struct npu_comp		*npucomp;
+
+	/* 64-bit TCE bypass region */
+	bool			tce_bypass_enabled;
+	uint64_t		tce_bypass_base;
+
+	/*
+	 * Used to track whether we've done DMA setup for this PE or not. We
+	 * want to defer allocating TCE tables, etc until we've added a
+	 * non-bridge device to the PE.
+	 */
+	bool			dma_setup_done;
+
+	/* MSIs. MVE index is identical for 32 and 64 bit MSI
+	 * and -1 if not supported. (It's actually identical to the
+	 * PE number)
+	 */
+	int			mve_number;
+
+	/* PEs in compound case */
+	struct pnv_ioda_pe	*master;
+	struct list_head	slaves;
+
+	/* Link in list of PE#s */
+	struct list_head	list;
+};
+
+#define PNV_PHB_FLAG_EEH	(1 << 0)
+
+struct pnv_phb {
+	struct pci_controller	*hose;
+	enum pnv_phb_type	type;
+	enum pnv_phb_model	model;
+	u64			hub_id;
+	u64			opal_id;
+	int			flags;
+	void __iomem		*regs;
+	u64			regs_phys;
+	int			initialized;
+	spinlock_t		lock;
+
+#ifdef CONFIG_DEBUG_FS
+	int			has_dbgfs;
+	struct dentry		*dbgfs;
+#endif
+
+	unsigned int		msi_base;
+	unsigned int		msi32_support;
+	struct msi_bitmap	msi_bmp;
+	int (*msi_setup)(struct pnv_phb *phb, struct pci_dev *dev,
+			 unsigned int hwirq, unsigned int virq,
+			 unsigned int is_64, struct msi_msg *msg);
+	int (*init_m64)(struct pnv_phb *phb);
+	int (*get_pe_state)(struct pnv_phb *phb, int pe_no);
+	void (*freeze_pe)(struct pnv_phb *phb, int pe_no);
+	int (*unfreeze_pe)(struct pnv_phb *phb, int pe_no, int opt);
+
+	struct {
+		/* Global bridge info */
+		unsigned int		total_pe_num;
+		unsigned int		reserved_pe_idx;
+		unsigned int		root_pe_idx;
+
+		/* 32-bit MMIO window */
+		unsigned int		m32_size;
+		unsigned int		m32_segsize;
+		unsigned int		m32_pci_base;
+
+		/* 64-bit MMIO window */
+		unsigned int		m64_bar_idx;
+		unsigned long		m64_size;
+		unsigned long		m64_segsize;
+		unsigned long		m64_base;
+#define MAX_M64_BARS 64
+		unsigned long		m64_bar_alloc;
+
+		/* IO ports */
+		unsigned int		io_size;
+		unsigned int		io_segsize;
+		unsigned int		io_pci_base;
+
+		/* PE allocation */
+		struct mutex		pe_alloc_mutex;
+		unsigned long		*pe_alloc;
+		struct pnv_ioda_pe	*pe_array;
+
+		/* M32 & IO segment maps */
+		unsigned int		*m64_segmap;
+		unsigned int		*m32_segmap;
+		unsigned int		*io_segmap;
+
+		/* DMA32 segment maps - IODA1 only */
+		unsigned int		dma32_count;
+		unsigned int		*dma32_segmap;
+
+		/* IRQ chip */
+		int			irq_chip_init;
+		struct irq_chip		irq_chip;
+
+		/* Sorted list of used PE's based
+		 * on the sequence of creation
+		 */
+		struct list_head	pe_list;
+		struct mutex            pe_list_mutex;
+
+		/* Reverse map of PEs, indexed by {bus, devfn} */
+		unsigned int		pe_rmap[0x10000];
+	} ioda;
+
+	/* PHB and hub diagnostics */
+	unsigned int		diag_data_size;
+	u8			*diag_data;
+};
+
+
+/* IODA PE management */
+
+static inline bool pnv_pci_is_m64(struct pnv_phb *phb, struct resource *r)
+{
+	/*
+	 * WARNING: We cannot rely on the resource flags. The Linux PCI
+	 * allocation code sometimes decides to put a 64-bit prefetchable
+	 * BAR in the 32-bit window, so we have to compare the addresses.
+	 *
+	 * For simplicity we only test resource start.
+	 */
+	return (r->start >= phb->ioda.m64_base &&
+		r->start < (phb->ioda.m64_base + phb->ioda.m64_size));
+}
+
+static inline bool pnv_pci_is_m64_flags(unsigned long resource_flags)
+{
+	unsigned long flags = (IORESOURCE_MEM_64 | IORESOURCE_PREFETCH);
+
+	return (resource_flags & flags) == flags;
+}
+
+int pnv_ioda_configure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe);
+int pnv_ioda_deconfigure_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe);
+
+void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb, struct pnv_ioda_pe *pe);
+void pnv_pci_ioda2_release_pe_dma(struct pnv_ioda_pe *pe);
+
+struct pnv_ioda_pe *pnv_ioda_alloc_pe(struct pnv_phb *phb, int count);
+void pnv_ioda_free_pe(struct pnv_ioda_pe *pe);
+
+#ifdef CONFIG_PCI_IOV
+/*
+ * For SR-IOV we want to put each VF's MMIO resource in to a separate PE.
+ * This requires a bit of acrobatics with the MMIO -> PE configuration
+ * and this structure is used to keep track of it all.
+ */
+struct pnv_iov_data {
+	/* number of VFs enabled */
+	u16     num_vfs;
+
+	/* pointer to the array of VF PEs. num_vfs long*/
+	struct pnv_ioda_pe *vf_pe_arr;
+
+	/* Did we map the VF BAR with single-PE IODA BARs? */
+	bool    m64_single_mode[PCI_SRIOV_NUM_BARS];
+
+	/*
+	 * True if we're using any segmented windows. In that case we need
+	 * shift the start of the IOV resource the segment corresponding to
+	 * the allocated PE.
+	 */
+	bool    need_shift;
+
+	/*
+	 * Bit mask used to track which m64 windows are used to map the
+	 * SR-IOV BARs for this device.
+	 */
+	DECLARE_BITMAP(used_m64_bar_mask, MAX_M64_BARS);
+
+	/*
+	 * If we map the SR-IOV BARs with a segmented window then
+	 * parts of that window will be "claimed" by other PEs.
+	 *
+	 * "holes" here is used to reserve the leading portion
+	 * of the window that is used by other (non VF) PEs.
+	 */
+	struct resource holes[PCI_SRIOV_NUM_BARS];
+};
+
+static inline struct pnv_iov_data *pnv_iov_get(struct pci_dev *pdev)
+{
+	return pdev->dev.archdata.iov_data;
+}
+
+void pnv_pci_ioda_fixup_iov(struct pci_dev *pdev);
+resource_size_t pnv_pci_iov_resource_alignment(struct pci_dev *pdev, int resno);
+
+int pnv_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs);
+int pnv_pcibios_sriov_disable(struct pci_dev *pdev);
+#endif /* CONFIG_PCI_IOV */
+
+extern struct pci_ops pnv_pci_ops;
+
+void pnv_pci_dump_phb_diag_data(struct pci_controller *hose,
+				unsigned char *log_buff);
+int pnv_pci_cfg_read(struct pci_dn *pdn,
+		     int where, int size, u32 *val);
+int pnv_pci_cfg_write(struct pci_dn *pdn,
+		      int where, int size, u32 val);
+extern struct iommu_table *pnv_pci_table_alloc(int nid);
+
+extern void pnv_pci_init_ioda_hub(struct device_node *np);
+extern void pnv_pci_init_ioda2_phb(struct device_node *np);
+extern void pnv_pci_init_npu_phb(struct device_node *np);
+extern void pnv_pci_init_npu2_opencapi_phb(struct device_node *np);
+extern void pnv_npu2_map_lpar(struct pnv_ioda_pe *gpe, unsigned long msr);
+extern void pnv_pci_reset_secondary_bus(struct pci_dev *dev);
+extern int pnv_eeh_phb_reset(struct pci_controller *hose, int option);
+
+extern int pnv_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type);
+extern void pnv_teardown_msi_irqs(struct pci_dev *pdev);
+extern struct pnv_ioda_pe *pnv_pci_bdfn_to_pe(struct pnv_phb *phb, u16 bdfn);
+extern struct pnv_ioda_pe *pnv_ioda_get_pe(struct pci_dev *dev);
+extern void pnv_set_msi_irq_chip(struct pnv_phb *phb, unsigned int virq);
+extern unsigned long pnv_pci_ioda2_get_table_size(__u32 page_shift,
+		__u64 window_size, __u32 levels);
+extern int pnv_eeh_post_init(void);
+
+__printf(3, 4)
+extern void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
+			    const char *fmt, ...);
+#define pe_err(pe, fmt, ...)					\
+	pe_level_printk(pe, KERN_ERR, fmt, ##__VA_ARGS__)
+#define pe_warn(pe, fmt, ...)					\
+	pe_level_printk(pe, KERN_WARNING, fmt, ##__VA_ARGS__)
+#define pe_info(pe, fmt, ...)					\
+	pe_level_printk(pe, KERN_INFO, fmt, ##__VA_ARGS__)
+
+/* Nvlink functions */
+extern void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass);
+extern void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm);
+extern void pnv_pci_npu_setup_iommu_groups(void);
+
+/* pci-ioda-tce.c */
+#define POWERNV_IOMMU_DEFAULT_LEVELS	2
+#define POWERNV_IOMMU_MAX_LEVELS	5
+
+extern int pnv_tce_build(struct iommu_table *tbl, long index, long npages,
+		unsigned long uaddr, enum dma_data_direction direction,
+		unsigned long attrs);
+extern void pnv_tce_free(struct iommu_table *tbl, long index, long npages);
+extern int pnv_tce_xchg(struct iommu_table *tbl, long index,
+		unsigned long *hpa, enum dma_data_direction *direction,
+		bool alloc);
+extern __be64 *pnv_tce_useraddrptr(struct iommu_table *tbl, long index,
+		bool alloc);
+extern unsigned long pnv_tce_get(struct iommu_table *tbl, long index);
+
+extern long pnv_pci_ioda2_table_alloc_pages(int nid, __u64 bus_offset,
+		__u32 page_shift, __u64 window_size, __u32 levels,
+		bool alloc_userspace_copy, struct iommu_table *tbl);
+extern void pnv_pci_ioda2_table_free_pages(struct iommu_table *tbl);
+
+extern long pnv_pci_link_table_and_group(int node, int num,
+		struct iommu_table *tbl,
+		struct iommu_table_group *table_group);
+extern void pnv_pci_unlink_table_and_group(struct iommu_table *tbl,
+		struct iommu_table_group *table_group);
+extern void pnv_pci_setup_iommu_table(struct iommu_table *tbl,
+		void *tce_mem, u64 tce_size,
+		u64 dma_offset, unsigned int page_shift);
+
+extern unsigned long pnv_ioda_parse_tce_sizes(struct pnv_phb *phb);
+
+static inline struct pnv_phb *pci_bus_to_pnvhb(struct pci_bus *bus)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	if (hose)
+		return hose->private_data;
+
+	return NULL;
+}
+
+#endif /* __POWERNV_PCI_H */