Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

27 files changed, 2945 insertions, 0 deletions

diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
new file mode 100644
index 000000000..b40b30853
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the 7206 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
new file mode 100644
index 000000000..2b1537082
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7206/irq.c
+ *
+ * Copyright (C) 2005,2006 Yoshinori Sato
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <mach-se/mach/se7206.h>
+
+#define INTSTS0 0x31800000
+#define INTSTS1 0x31800002
+#define INTMSK0 0x31800004
+#define INTMSK1 0x31800006
+#define INTSEL  0x31800008
+
+#define IRQ0_IRQ 64
+#define IRQ1_IRQ 65
+#define IRQ3_IRQ 67
+
+#define INTC_IPR01 0xfffe0818
+#define INTC_ICR1  0xfffe0802
+
+static void disable_se7206_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned short val;
+	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set the priority in IPR to 0 */
+	val = __raw_readw(INTC_IPR01);
+	val &= mask;
+	__raw_writew(val, INTC_IPR01);
+	/* FPGA mask set */
+	msk0 = __raw_readw(INTMSK0);
+	msk1 = __raw_readw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 |= 0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 |= 0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 |= 0x0f00;
+		msk1 |= 0x00ff;
+		break;
+	}
+	__raw_writew(msk0, INTMSK0);
+	__raw_writew(msk1, INTMSK1);
+}
+
+static void enable_se7206_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	unsigned short val;
+	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set priority in IPR back to original value */
+	val = __raw_readw(INTC_IPR01);
+	val |= value;
+	__raw_writew(val, INTC_IPR01);
+
+	/* FPGA mask reset */
+	msk0 = __raw_readw(INTMSK0);
+	msk1 = __raw_readw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 &= ~0x0f00;
+		msk1 &= ~0x00ff;
+		break;
+	}
+	__raw_writew(msk0, INTMSK0);
+	__raw_writew(msk1, INTMSK1);
+}
+
+static void eoi_se7206_irq(struct irq_data *data)
+{
+	unsigned short sts0,sts1;
+	unsigned int irq = data->irq;
+
+	if (!irqd_irq_disabled(data) && !irqd_irq_inprogress(data))
+		enable_se7206_irq(data);
+	/* FPGA isr clear */
+	sts0 = __raw_readw(INTSTS0);
+	sts1 = __raw_readw(INTSTS1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		sts0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		sts0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		sts0 &= ~0x0f00;
+		sts1 &= ~0x00ff;
+		break;
+	}
+	__raw_writew(sts0, INTSTS0);
+	__raw_writew(sts1, INTSTS1);
+}
+
+static struct irq_chip se7206_irq_chip __read_mostly = {
+	.name		= "SE7206-FPGA",
+	.irq_mask	= disable_se7206_irq,
+	.irq_unmask	= enable_se7206_irq,
+	.irq_eoi	= eoi_se7206_irq,
+};
+
+static void make_se7206_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_set_chip_and_handler_name(irq, &se7206_irq_chip,
+				      handle_level_irq, "level");
+	disable_se7206_irq(irq_get_irq_data(irq));
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7206_IRQ(void)
+{
+	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
+	make_se7206_irq(IRQ1_IRQ); /* ATA */
+	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
+
+	__raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR1); /* ICR1 */
+
+	/* FPGA System register setup*/
+	__raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */
+	__raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */
+
+	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
+	__raw_writew(0x0001,INTSEL);
+}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
new file mode 100644
index 000000000..dc55d3a69
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *
+ * linux/arch/sh/boards/se/7206/setup.c
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ * Copyright (C) 2007 - 2008  Paul Mundt
+ *
+ * Hitachi 7206 SolutionEngine Support.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <mach-se/mach/se7206.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name		= "smc91x-regs",
+		.start		= PA_SMSC + 0x300,
+		.end		= PA_SMSC + 0x300 + 0x020 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct platform_device *se7206_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+};
+
+static int __init se7206_devices_setup(void)
+{
+	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
+}
+device_initcall(se7206_devices_setup);
+
+static int se7206_mode_pins(void)
+{
+	return MODE_PIN1 | MODE_PIN2;
+}
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_init_irq		= init_se7206_IRQ,
+	.mv_mode_pins		= se7206_mode_pins,
+};
diff --git a/arch/sh/boards/mach-se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
new file mode 100644
index 000000000..e05866109
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the 7343 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
new file mode 100644
index 000000000..1aedbfe32
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hitachi UL SolutionEngine 7343 FPGA IRQ Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ * Copyright (C) 2012  Paul Mundt
+ *
+ * Based on linux/arch/sh/boards/se/7343/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ */
+#define DRV_NAME "SE7343-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach-se/mach/se7343.h>
+
+#define PA_CPLD_BASE_ADDR	0x11400000
+#define PA_CPLD_ST_REG		0x08	/* CPLD Interrupt status register */
+#define PA_CPLD_IMSK_REG	0x0a	/* CPLD Interrupt mask register */
+
+static void __iomem *se7343_irq_regs;
+struct irq_domain *se7343_irq_domain;
+
+static void se7343_irq_demux(struct irq_desc *desc)
+{
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int bit;
+
+	chip->irq_mask_ack(data);
+
+	mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG);
+
+	for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR)
+		generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit));
+
+	chip->irq_unmask(data);
+}
+
+static void __init se7343_domain_init(void)
+{
+	int i;
+
+	se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
+						  &irq_domain_simple_ops, NULL);
+	if (unlikely(!se7343_irq_domain)) {
+		printk("Failed to get IRQ domain\n");
+		return;
+	}
+
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) {
+		int irq = irq_create_mapping(se7343_irq_domain, i);
+
+		if (unlikely(irq == 0)) {
+			printk("Failed to allocate IRQ %d\n", i);
+			return;
+		}
+	}
+}
+
+static void __init se7343_gc_init(void)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int irq_base;
+
+	irq_base = irq_linear_revmap(se7343_irq_domain, 0);
+
+	gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs,
+				    handle_level_irq);
+	if (unlikely(!gc))
+		return;
+
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+
+	ct->regs.mask = PA_CPLD_IMSK_REG;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+
+	irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+	irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7343se_IRQ(void)
+{
+	se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16);
+	if (unlikely(!se7343_irq_regs)) {
+		pr_err("Failed to remap CPLD\n");
+		return;
+	}
+
+	/*
+	 * All FPGA IRQs disabled by default
+	 */
+	iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG);
+
+	__raw_writew(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+
+	se7343_domain_init();
+	se7343_gc_init();
+}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
new file mode 100644
index 000000000..fe0e55060
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/usb/isp116x.h>
+#include <linux/delay.h>
+#include <linux/irqdomain.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7343.h>
+#include <asm/heartbeat.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 128 * 1024,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 31 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+#define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	[0] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x16000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.uartclk	= 7372800,
+	},
+	[1] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x17000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.uartclk	= 7372800,
+	},
+	{ },
+};
+
+static struct platform_device uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static void isp116x_delay(struct device *dev, int delay)
+{
+	ndelay(delay);
+}
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.start  = 0x11800000,
+		.end    = 0x11800001,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 0x11800002,
+		.end    = 0x11800003,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		/* Filled in later */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp116x_platform_data usb_platform_data = {
+	.sel15Kres		= 1,
+	.oc_enable		= 1,
+	.int_act_high		= 0,
+	.int_edge_triggered	= 0,
+	.remote_wakeup_enable	= 0,
+	.delay			= isp116x_delay,
+};
+
+static struct platform_device usb_device = {
+	.name			= "isp116x-hcd",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(usb_resources),
+	.resource		= usb_resources,
+	.dev			= {
+		.platform_data	= &usb_platform_data,
+	},
+
+};
+
+static struct platform_device *sh7343se_platform_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&uart_device,
+	&usb_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+	/* Wire-up dynamic vectors */
+	serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTA);
+	serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTB);
+	usb_resources[2].start = usb_resources[2].end =
+		irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
+
+	return platform_add_devices(sh7343se_platform_devices,
+				    ARRAY_SIZE(sh7343se_platform_devices));
+}
+device_initcall(sh7343se_devices_setup);
+
+/*
+ * Initialize the board
+ */
+static void __init sh7343se_setup(char **cmdline_p)
+{
+	__raw_writew(0xf900, FPGA_OUT);	/* FPGA */
+
+	__raw_writew(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
+	__raw_writew(0x0020, PORT_PSELD);
+
+	printk(KERN_INFO "MS7343CP01 Setup...done\n");
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7343se __initmv = {
+	.mv_name = "SolutionEngine 7343",
+	.mv_setup = sh7343se_setup,
+	.mv_init_irq = init_7343se_IRQ,
+};
diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
new file mode 100644
index 000000000..900d93cfb
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the 770x SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
new file mode 100644
index 000000000..66e2c8aa0
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/770x/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	/*
+	* Super I/O (Just mimic PC):
+	*  1: keyboard
+	*  3: serial 0
+	*  4: serial 1
+	*  5: printer
+	*  6: floppy
+	*  8: rtc
+	* 12: mouse
+	* 14: ide0
+	*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+	/* This is default value */
+	{ 13, 0, 8,  0x0f-13, },
+	{ 5 , 0, 4,  0x0f- 5, },
+	{ 10, 1, 0,  0x0f-10, },
+	{ 7 , 2, 4,  0x0f- 7, },
+	{ 3 , 2, 0,  0x0f- 3, },
+	{ 1 , 3, 12, 0x0f- 1, },
+	{ 12, 3, 4,  0x0f-12, }, /* LAN */
+	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
+	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
+	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
+	{ 0 , 5, 12, 0x0f   , }, 
+	{ 4 , 5, 4,  0x0f- 4, },
+	{ 8 , 6, 12, 0x0f- 8, },
+	{ 9 , 6, 8,  0x0f- 9, },
+	{ 11, 6, 4,  0x0f-11, },
+#else
+	{ 14, 0,  8, 0x0f-14, },
+	{ 12, 0,  4, 0x0f-12, },
+	{  8, 1,  4, 0x0f- 8, },
+	{  6, 2, 12, 0x0f- 6, },
+	{  5, 2,  8, 0x0f- 5, },
+	{  4, 2,  4, 0x0f- 4, },
+	{  3, 2,  0, 0x0f- 3, },
+	{  1, 3, 12, 0x0f- 1, },
+#if defined(CONFIG_STNIC)
+	/* ST NIC */
+	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
+#endif
+	/* MRSHPC IRQs setting */
+	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
+	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
+	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
+	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
+	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
+	/* NOTE: #2 and #13 are not used on PC */
+	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
+	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
+#endif
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "IPR-se770x",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se_IRQ(void)
+{
+	/* Disable all interrupts */
+	__raw_writew(0, BCR_ILCRA);
+	__raw_writew(0, BCR_ILCRB);
+	__raw_writew(0, BCR_ILCRC);
+	__raw_writew(0, BCR_ILCRD);
+	__raw_writew(0, BCR_ILCRE);
+	__raw_writew(0, BCR_ILCRF);
+	__raw_writew(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
new file mode 100644
index 000000000..412326d59
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/770x/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sh_eth.h>
+#include <mach-se/mach/se.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/smc37c93x.h>
+#include <asm/heartbeat.h>
+
+/*
+ * Configure the Super I/O chip
+ */
+static void __init smsc_config(int index, int data)
+{
+	outb_p(index, INDEX_PORT);
+	outb_p(data, DATA_PORT);
+}
+
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
+{
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+
+	/* FDC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
+
+	/* AUXIO (GPIO): to use IDE1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
+	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
+	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
+
+	/* COM1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x03);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
+
+	/* COM2 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x02);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
+
+	/* RTC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
+
+	/* XXX: PARPORT, KBD, and MOUSE will come here... */
+	outb_p(CONFIG_EXIT, CONFIG_PORT);
+}
+
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = IRQ_CFCARD,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+/* SH771X Ethernet driver */
+static struct sh_eth_plat_data sh_eth_plat = {
+	.phy = PHY_ID,
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource sh_eth0_resources[] = {
+	[0] = {
+		.start = SH_ETH0_BASE,
+		.end = SH_ETH0_BASE + 0x1B8 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_TSU_BASE,
+		.end = SH_TSU_BASE + 0x200 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = SH_ETH0_IRQ,
+		.end = SH_ETH0_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth0_device = {
+	.name = "sh771x-ether",
+	.id = 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth0_resources),
+	.resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+	[0] = {
+		.start = SH_ETH1_BASE,
+		.end = SH_ETH1_BASE + 0x1B8 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_TSU_BASE,
+		.end = SH_TSU_BASE + 0x200 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = SH_ETH1_IRQ,
+		.end = SH_ETH1_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth1_device = {
+	.name = "sh771x-ether",
+	.id = 1,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth1_resources),
+	.resource = sh_eth1_resources,
+};
+#endif
+
+static struct platform_device *se_devices[] __initdata = {
+	&heartbeat_device,
+	&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+	&sh_eth0_device,
+	&sh_eth1_device,
+#endif
+};
+
+static int __init se_devices_setup(void)
+{
+	mrshpc_setup_windows();
+	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
+}
+device_initcall(se_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_setup		= smsc_setup,
+	.mv_init_irq		= init_se_IRQ,
+};
diff --git a/arch/sh/boards/mach-se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
new file mode 100644
index 000000000..09436f10d
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
new file mode 100644
index 000000000..e6ef2a265
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7721/irq.c
+ *
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7721.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	MRSHPC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
+	  { 0, MRSHPC } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
+			 NULL, NULL, prio_registers, NULL);
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7721_IRQ(void)
+{
+	/* PPCR */
+	__raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118);
+
+	register_intc_controller(&intc_desc);
+	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
+}
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
new file mode 100644
index 000000000..3af724dc4
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7721/setup.c
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <mach-se/mach/se7721.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_MRSHPC_IO + 0x1f0,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device *se7721_devices[] __initdata = {
+	&cf_ide_device,
+	&heartbeat_device
+};
+
+static int __init se7721_devices_setup(void)
+{
+	mrshpc_setup_windows();
+	return platform_add_devices(se7721_devices, ARRAY_SIZE(se7721_devices));
+}
+device_initcall(se7721_devices_setup);
+
+static void __init se7721_setup(char **cmdline_p)
+{
+	/* for USB */
+	__raw_writew(0x0000, 0xA405010C);	/* PGCR */
+	__raw_writew(0x0000, 0xA405010E);	/* PHCR */
+	__raw_writew(0x00AA, 0xA4050118);	/* PPCR */
+	__raw_writew(0x0000, 0xA4050124);	/* PSELA */
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7721 __initmv = {
+	.mv_name		= "Solution Engine 7721",
+	.mv_setup		= se7721_setup,
+	.mv_init_irq		= init_se7721_IRQ,
+};
diff --git a/arch/sh/boards/mach-se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
new file mode 100644
index 000000000..a5e89c0c6
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the HITACHI UL SolutionEngine 7722 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
new file mode 100644
index 000000000..6d3459276
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hitachi UL SolutionEngine 7722 FPGA IRQ Support.
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ * Copyright (C) 2012  Paul Mundt
+ */
+#define DRV_NAME "SE7722-FPGA"
+#define pr_fmt(fmt) DRV_NAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/sizes.h>
+#include <mach-se/mach/se7722.h>
+
+#define IRQ01_BASE_ADDR	0x11800000
+#define IRQ01_MODE_REG	0
+#define IRQ01_STS_REG	4
+#define IRQ01_MASK_REG	8
+
+static void __iomem *se7722_irq_regs;
+struct irq_domain *se7722_irq_domain;
+
+static void se7722_irq_demux(struct irq_desc *desc)
+{
+	struct irq_data *data = irq_desc_get_irq_data(desc);
+	struct irq_chip *chip = irq_data_get_irq_chip(data);
+	unsigned long mask;
+	int bit;
+
+	chip->irq_mask_ack(data);
+
+	mask = ioread16(se7722_irq_regs + IRQ01_STS_REG);
+
+	for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR)
+		generic_handle_irq(irq_linear_revmap(se7722_irq_domain, bit));
+
+	chip->irq_unmask(data);
+}
+
+static void __init se7722_domain_init(void)
+{
+	int i;
+
+	se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR,
+						  &irq_domain_simple_ops, NULL);
+	if (unlikely(!se7722_irq_domain)) {
+		printk("Failed to get IRQ domain\n");
+		return;
+	}
+
+	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
+		int irq = irq_create_mapping(se7722_irq_domain, i);
+
+		if (unlikely(irq == 0)) {
+			printk("Failed to allocate IRQ %d\n", i);
+			return;
+		}
+	}
+}
+
+static void __init se7722_gc_init(void)
+{
+	struct irq_chip_generic *gc;
+	struct irq_chip_type *ct;
+	unsigned int irq_base;
+
+	irq_base = irq_linear_revmap(se7722_irq_domain, 0);
+
+	gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs,
+				    handle_level_irq);
+	if (unlikely(!gc))
+		return;
+
+	ct = gc->chip_types;
+	ct->chip.irq_mask = irq_gc_mask_set_bit;
+	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+
+	ct->regs.mask = IRQ01_MASK_REG;
+
+	irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR),
+			       IRQ_GC_INIT_MASK_CACHE,
+			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+
+	irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux);
+	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux);
+	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
+
+/*
+ * Initialize FPGA IRQs
+ */
+void __init init_se7722_IRQ(void)
+{
+	se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16);
+	if (unlikely(!se7722_irq_regs)) {
+		printk("Failed to remap IRQ01 regs\n");
+		return;
+	}
+
+	/*
+	 * All FPGA IRQs disabled by default
+	 */
+	iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG);
+
+	__raw_writew(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+
+	se7722_domain_init();
+	se7722_gc_init();
+}
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
new file mode 100644
index 000000000..2cd4a2e84
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7722/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ * Copyright (C) 2012 Paul Mundt
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/irqdomain.h>
+#include <linux/smc91x.h>
+#include <linux/sh_intc.h>
+#include <mach-se/mach/se7722.h>
+#include <mach-se/mach/mrshpc.h>
+#include <asm/machvec.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <cpu/sh7722.h>
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* SMC91x */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		/* Filled in later */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+		.platform_data	= &smc91x_info,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		/* Filled in later */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = { /* SW1 -> SW30 */
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
+		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
+		KEY_Z,
+		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct platform_device *se7722_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&cf_ide_device,
+	&sh_keysc_device,
+};
+
+static int __init se7722_devices_setup(void)
+{
+	mrshpc_setup_windows();
+
+	/* Wire-up dynamic vectors */
+	cf_ide_resources[2].start = cf_ide_resources[2].end =
+		irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0);
+
+	smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
+		irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC);
+
+	return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
+}
+device_initcall(se7722_devices_setup);
+
+static void __init se7722_setup(char **cmdline_p)
+{
+	__raw_writew(0x010D, FPGA_OUT);    /* FPGA */
+
+	__raw_writew(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
+	__raw_writew(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+
+	/* LCDC I/O */
+	__raw_writew(0x0020, PORT_PSELD);
+
+	/* SIOF1*/
+	__raw_writew(0x0003, PORT_PSELB);
+	__raw_writew(0xe000, PORT_PSELC);
+	__raw_writew(0x0000, PORT_PKCR);
+
+	/* LCDC */
+	__raw_writew(0x4020, PORT_PHCR);
+	__raw_writew(0x0000, PORT_PLCR);
+	__raw_writew(0x0000, PORT_PMCR);
+	__raw_writew(0x0002, PORT_PRCR);
+	__raw_writew(0x0000, PORT_PXCR);   /* LCDC,CS6A */
+
+	/* KEYSC */
+	__raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+	__raw_writew(0x0000, PORT_PYCR);
+	__raw_writew(0x0000, PORT_PZCR);
+	__raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	__raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7722 __initmv = {
+	.mv_name                = "Solution Engine 7722" ,
+	.mv_setup               = se7722_setup ,
+	.mv_init_irq		= init_se7722_IRQ,
+};
diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile
new file mode 100644
index 000000000..6c6112b24
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the HITACHI UL SolutionEngine 7724 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o sdram.o
diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c
new file mode 100644
index 000000000..14ce30247
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/irq.c
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7724/irq.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on  linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7724 Support.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/export.h>
+#include <linux/topology.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <mach-se/mach/se7724.h>
+
+struct fpga_irq {
+	unsigned long  sraddr;
+	unsigned long  mraddr;
+	unsigned short mask;
+	unsigned int   base;
+};
+
+static unsigned int fpga2irq(unsigned int irq)
+{
+	if (irq >= IRQ0_BASE &&
+	    irq <= IRQ0_END)
+		return IRQ0_IRQ;
+	else if (irq >= IRQ1_BASE &&
+		 irq <= IRQ1_END)
+		return IRQ1_IRQ;
+	else
+		return IRQ2_IRQ;
+}
+
+static struct fpga_irq get_fpga_irq(unsigned int irq)
+{
+	struct fpga_irq set;
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		set.sraddr = IRQ0_SR;
+		set.mraddr = IRQ0_MR;
+		set.mask   = IRQ0_MASK;
+		set.base   = IRQ0_BASE;
+		break;
+	case IRQ1_IRQ:
+		set.sraddr = IRQ1_SR;
+		set.mraddr = IRQ1_MR;
+		set.mask   = IRQ1_MASK;
+		set.base   = IRQ1_BASE;
+		break;
+	default:
+		set.sraddr = IRQ2_SR;
+		set.mraddr = IRQ2_MR;
+		set.mask   = IRQ2_MASK;
+		set.base   = IRQ2_BASE;
+		break;
+	}
+
+	return set;
+}
+
+static void disable_se7724_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+	unsigned int bit = irq - set.base;
+	__raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr);
+}
+
+static void enable_se7724_irq(struct irq_data *data)
+{
+	unsigned int irq = data->irq;
+	struct fpga_irq set = get_fpga_irq(fpga2irq(irq));
+	unsigned int bit = irq - set.base;
+	__raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr);
+}
+
+static struct irq_chip se7724_irq_chip __read_mostly = {
+	.name		= "SE7724-FPGA",
+	.irq_mask	= disable_se7724_irq,
+	.irq_unmask	= enable_se7724_irq,
+};
+
+static void se7724_irq_demux(struct irq_desc *desc)
+{
+	unsigned int irq = irq_desc_get_irq(desc);
+	struct fpga_irq set = get_fpga_irq(irq);
+	unsigned short intv = __raw_readw(set.sraddr);
+	unsigned int ext_irq = set.base;
+
+	intv &= set.mask;
+
+	for (; intv; intv >>= 1, ext_irq++) {
+		if (!(intv & 1))
+			continue;
+
+		generic_handle_irq(ext_irq);
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7724_IRQ(void)
+{
+	int irq_base, i;
+
+	__raw_writew(0xffff, IRQ0_MR);  /* mask all */
+	__raw_writew(0xffff, IRQ1_MR);  /* mask all */
+	__raw_writew(0xffff, IRQ2_MR);  /* mask all */
+	__raw_writew(0x0000, IRQ0_SR);  /* clear irq */
+	__raw_writew(0x0000, IRQ1_SR);  /* clear irq */
+	__raw_writew(0x0000, IRQ2_SR);  /* clear irq */
+	__raw_writew(0x002a, IRQ_MODE); /* set irq type */
+
+	irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE,
+				   SE7724_FPGA_IRQ_NR, numa_node_id());
+	if (IS_ERR_VALUE(irq_base)) {
+		pr_err("%s: failed hooking irqs for FPGA\n", __func__);
+		return;
+	}
+
+	for (i = 0; i < SE7724_FPGA_IRQ_NR; i++)
+		irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip,
+					      handle_level_irq, "level");
+
+	irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux);
+	irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ1_IRQ, se7724_irq_demux);
+	irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	irq_set_chained_handler(IRQ2_IRQ, se7724_irq_demux);
+	irq_set_irq_type(IRQ2_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S
new file mode 100644
index 000000000..61c1fe78d
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/sdram.S
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * MS7724SE sdram self/auto-refresh setup code
+ *
+ *  Copyright (C) 2009 Magnus Damm
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+	.balign 4
+ENTRY(ms7724se_sdram_enter_start)
+
+	/* DBSC: put memory in self-refresh mode */
+
+	ED 0xFD000010, 0x00000000 /* DBEN */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+ENTRY(ms7724se_sdram_enter_end)
+
+	.balign 4
+ENTRY(ms7724se_sdram_leave_start)
+
+	/* DBSC: put memory in auto-refresh mode */
+
+	mov.l	@(SH_SLEEP_MODE, r5), r0
+	tst	#SUSP_SH_RSTANDBY, r0
+	bf	resume_rstandby
+
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	WAIT 1
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+resume_rstandby:
+
+	/* CPG: setup clocks before restarting external memory */
+
+	ED 0xA4150024, 0x00004000 /* PLLCR */
+
+	mov.l	FRQCRA,r0
+	mov.l	@r0,r3
+	mov.l	KICK,r1
+	or	r1, r3
+	mov.l	r3, @r0
+
+	mov.l	LSTATS,r0
+	mov	#1,r1
+WAIT_LSTATS:
+	mov.l	@r0,r3
+	tst	r1,r3
+	bf	WAIT_LSTATS
+
+	/* DBSC: re-initialize and put in auto-refresh */
+
+	ED 0xFD000108, 0x00000181 /* DBPDCNT0 */
+	ED 0xFD000020, 0x015B0002 /* DBCONF */
+	ED 0xFD000030, 0x03071502 /* DBTR0 */
+	ED 0xFD000034, 0x02020102 /* DBTR1 */
+	ED 0xFD000038, 0x01090405 /* DBTR2 */
+	ED 0xFD00003C, 0x00000002 /* DBTR3 */
+	ED 0xFD000008, 0x00000005 /* DBKIND */
+	ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+	ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+	ED 0xFD000018, 0x00000001 /* DBCKECNT */
+
+	mov	#100,r0
+WAIT_400NS:
+	dt	r0
+	bf	WAIT_400NS
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000060, 0x00020000 /* DBMRCNT (EMR2) */
+	ED 0xFD000060, 0x00030000 /* DBMRCNT (EMR3) */
+	ED 0xFD000060, 0x00010004 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00000532 /* DBMRCNT (MRS) */
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000060, 0x00000432 /* DBMRCNT (MRS) */
+	ED 0xFD000060, 0x000103c0 /* DBMRCNT (EMR) */
+	ED 0xFD000060, 0x00010040 /* DBMRCNT (EMR) */
+
+	mov	#100,r0
+WAIT_400NS_2:
+	dt	r0
+	bf	WAIT_400NS_2
+
+	ED 0xFD000010, 0x00000001 /* DBEN */
+	ED 0xFD000044, 0x0000050f /* DBRFPDN1 */
+	ED 0xFD000048, 0x236800e6 /* DBRFPDN2 */
+
+	mov.l	DUMMY,r0
+	mov.l	@r0, r1 /* force single dummy read */
+
+	ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+	ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+	ED 0xFD000108, 0x00000080 /* DBPDCNT0 */
+	ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+	rts
+	 nop
+
+	.balign 4
+DUMMY:	.long	0xac400000
+FRQCRA:	.long	0xa4150000
+KICK:	.long	0x80000000
+LSTATS:	.long	0xa4150060
+
+ENTRY(ms7724se_sdram_leave_end)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
new file mode 100644
index 000000000..edc7712e4
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -0,0 +1,984 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7724/setup.c
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ *
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ */
+#include <asm/clock.h>
+#include <asm/heartbeat.h>
+#include <asm/io.h>
+#include <asm/suspend.h>
+
+#include <cpu/sh7724.h>
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/interrupt.h>
+#include <linux/memblock.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
+#include <linux/sh_eth.h>
+#include <linux/sh_intc.h>
+#include <linux/smc91x.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
+#include <linux/dma-map-ops.h>
+
+#include <mach-se/mach/se7724.h>
+#include <media/drv-intf/renesas-ceu.h>
+
+#include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
+
+#include <video/sh_mobile_lcdc.h>
+
+#define CEU_BUFFER_MEMORY_SIZE		(4 << 20)
+static phys_addr_t ceu0_dma_membase;
+static phys_addr_t ceu1_dma_membase;
+
+/*
+ * SWx    1234 5678
+ * ------------------------------------
+ * SW31 : 1001 1100    : default
+ * SW32 : 0111 1111    : use on board flash
+ *
+ * SW41 : abxx xxxx  -> a = 0 : Analog  monitor
+ *                          1 : Digital monitor
+ *                      b = 0 : VGA
+ *                          1 : 720p
+ */
+
+/*
+ * about 720p
+ *
+ * When you use 1280 x 720 lcdc output,
+ * you should change OSC6 lcdc clock from 25.175MHz to 74.25MHz,
+ * and change SW41 to use 720p
+ */
+
+/*
+ * about sound
+ *
+ * This setup.c supports FSI slave mode.
+ * Please change J20, J21, J22 pin to 1-2 connection.
+ */
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* LAN91C111 */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x1a300300,
+		.end    = 0x1a30030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ0_SMC,
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name	= "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+/* MTD */
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (2 * 1024 * 1024),
+	}, {
+		.name = "free-area",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.dev		= {
+		.platform_data = &nor_flash_data,
+	},
+};
+
+/* LCDC */
+static const struct fb_videomode lcdc_720p_modes[] = {
+	{
+		.name		= "LB070WV1",
+		.sync		= 0, /* hsync and vsync are active low */
+		.xres		= 1280,
+		.yres		= 720,
+		.left_margin	= 220,
+		.right_margin	= 110,
+		.hsync_len	= 40,
+		.upper_margin	= 20,
+		.lower_margin	= 5,
+		.vsync_len	= 5,
+	},
+};
+
+static const struct fb_videomode lcdc_vga_modes[] = {
+	{
+		.name		= "LB070WV1",
+		.sync		= 0, /* hsync and vsync are active low */
+		.xres		= 640,
+		.yres		= 480,
+		.left_margin	= 105,
+		.right_margin	= 50,
+		.hsync_len	= 96,
+		.upper_margin	= 33,
+		.lower_margin	= 10,
+		.vsync_len	= 2,
+	},
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.clock_divider = 1,
+		.panel_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe942fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xf40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+/* CEU0 */
+static struct ceu_platform_data ceu0_pdata = {
+	.num_subdevs = 0,
+};
+
+static struct resource ceu0_resources[] = {
+	[0] = {
+		.name	= "CEU0",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x880),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ceu0_device = {
+	.name		= "renesas-ceu",
+	.id             = 0, /* "ceu.0" clock */
+	.num_resources	= ARRAY_SIZE(ceu0_resources),
+	.resource	= ceu0_resources,
+	.dev	= {
+		.platform_data	= &ceu0_pdata,
+	},
+};
+
+/* CEU1 */
+static struct ceu_platform_data ceu1_pdata = {
+	.num_subdevs = 0,
+};
+
+static struct resource ceu1_resources[] = {
+	[0] = {
+		.name	= "CEU1",
+		.start	= 0xfe914000,
+		.end	= 0xfe91409f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x9e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ceu1_device = {
+	.name		= "renesas-ceu",
+	.id             = 1, /* "ceu.1" clock */
+	.num_resources	= ARRAY_SIZE(ceu1_resources),
+	.resource	= ceu1_resources,
+	.dev	= {
+		.platform_data	= &ceu1_pdata,
+	},
+};
+
+/* FSI */
+/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C021d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xf80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+};
+
+static struct asoc_simple_card_info fsi_ak4642_info = {
+	.name		= "AK4642",
+	.card		= "FSIA-AK4642",
+	.codec		= "ak4642-codec.0-0012",
+	.platform	= "sh_fsi.0",
+	.daifmt		= SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBM_CFM,
+	.cpu_dai = {
+		.name	= "fsia-dai",
+	},
+	.codec_dai = {
+		.name	= "ak4642-hifi",
+		.sysclk	= 11289600,
+	},
+};
+
+static struct platform_device fsi_ak4642_device = {
+	.name	= "asoc-simple-card",
+	.dev	= {
+		.platform_data	= &fsi_ak4642_info,
+	},
+};
+
+/* KEYSC in SoC (Needs SW33-2 set to ON) */
+static struct sh_keysc_info keysc_info = {
+	.mode = SH_KEYSC_MODE_1,
+	.scan_timing = 3,
+	.delay = 50,
+	.keycodes = {
+		KEY_1, KEY_2, KEY_3, KEY_4, KEY_5,
+		KEY_6, KEY_7, KEY_8, KEY_9, KEY_A,
+		KEY_B, KEY_C, KEY_D, KEY_E, KEY_F,
+		KEY_G, KEY_H, KEY_I, KEY_K, KEY_L,
+		KEY_M, KEY_N, KEY_O, KEY_P, KEY_Q,
+		KEY_R, KEY_S, KEY_T, KEY_U, KEY_V,
+	},
+};
+
+static struct resource keysc_resources[] = {
+	[0] = {
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xbe0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device keysc_device = {
+	.name           = "sh_keysc",
+	.id             = 0, /* "keysc0" clock */
+	.num_resources  = ARRAY_SIZE(keysc_resources),
+	.resource       = keysc_resources,
+	.dev	= {
+		.platform_data	= &keysc_info,
+	},
+};
+
+/* SH Eth */
+static struct resource sh_eth_resources[] = {
+	[0] = {
+		.start = SH_ETH_ADDR,
+		.end   = SH_ETH_ADDR + 0x1FC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = evt2irq(0xd60),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct sh_eth_plat_data sh_eth_plat = {
+	.phy = 0x1f, /* SMSC LAN8187 */
+	.phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh7724-ether",
+	.id = 0,
+	.dev = {
+		.platform_data = &sh_eth_plat,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+	.resource = sh_eth_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb0_host_data = {
+	.on_chip = 1,
+};
+
+static struct resource sh7724_usb0_host_resources[] = {
+	[0] = {
+		.start	= 0xa4d80000,
+		.end	= 0xa4d80124 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa20),
+		.end	= evt2irq(0xa20),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb0_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb0_host_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb0_host_resources),
+	.resource	= sh7724_usb0_host_resources,
+};
+
+static struct r8a66597_platdata sh7724_usb1_gadget_data = {
+	.on_chip = 1,
+};
+
+static struct resource sh7724_usb1_gadget_resources[] = {
+	[0] = {
+		.start	= 0xa4d90000,
+		.end	= 0xa4d90123,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0xa40),
+		.end	= evt2irq(0xa40),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct platform_device sh7724_usb1_gadget_device = {
+	.name		= "r8a66597_udc",
+	.id		= 1, /* USB1 */
+	.dev = {
+		.dma_mask		= NULL,         /*  not use dma */
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh7724_usb1_gadget_data,
+	},
+	.num_resources	= ARRAY_SIZE(sh7724_usb1_gadget_resources),
+	.resource	= sh7724_usb1_gadget_resources,
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] =
+{
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct resource sdhi0_cn7_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start  = 0x04ce0000,
+		.end    = 0x04ce00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0xe80),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sh7724_sdhi0_data = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI0_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI0_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi0_cn7_device = {
+	.name           = "sh_mobile_sdhi",
+	.id		= 0,
+	.num_resources  = ARRAY_SIZE(sdhi0_cn7_resources),
+	.resource       = sdhi0_cn7_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi0_data,
+	},
+};
+
+static struct resource sdhi1_cn8_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start  = 0x04cf0000,
+		.end    = 0x04cf00ff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x4e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct tmio_mmc_data sh7724_sdhi1_data = {
+	.chan_priv_tx	= (void *)SHDMA_SLAVE_SDHI1_TX,
+	.chan_priv_rx	= (void *)SHDMA_SLAVE_SDHI1_RX,
+	.capabilities	= MMC_CAP_SDIO_IRQ,
+};
+
+static struct platform_device sdhi1_cn8_device = {
+	.name           = "sh_mobile_sdhi",
+	.id		= 1,
+	.num_resources  = ARRAY_SIZE(sdhi1_cn8_resources),
+	.resource       = sdhi1_cn8_resources,
+	.dev = {
+		.platform_data	= &sh7724_sdhi1_data,
+	},
+};
+
+/* IrDA */
+static struct resource irda_resources[] = {
+	[0] = {
+		.name	= "IrDA",
+		.start  = 0xA45D0000,
+		.end    = 0xA45D0049,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x480),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device irda_device = {
+	.name           = "sh_sir",
+	.num_resources  = ARRAY_SIZE(irda_resources),
+	.resource       = irda_resources,
+};
+
+#include <media/i2c/ak881x.h>
+#include <media/drv-intf/sh_vou.h>
+
+static struct ak881x_pdata ak881x_pdata = {
+	.flags = AK881X_IF_MODE_SLAVE,
+};
+
+static struct i2c_board_info ak8813 = {
+	/* With open J18 jumper address is 0x21 */
+	I2C_BOARD_INFO("ak8813", 0x20),
+	.platform_data = &ak881x_pdata,
+};
+
+static struct sh_vou_pdata sh_vou_pdata = {
+	.bus_fmt	= SH_VOU_BUS_8BIT,
+	.flags		= SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW,
+	.board_info	= &ak8813,
+	.i2c_adap	= 0,
+};
+
+static struct resource sh_vou_resources[] = {
+	[0] = {
+		.start  = 0xfe960000,
+		.end    = 0xfe962043,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = evt2irq(0x8e0),
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vou_device = {
+	.name           = "sh-vou",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(sh_vou_resources),
+	.resource       = sh_vou_resources,
+	.dev		= {
+		.platform_data	= &sh_vou_pdata,
+	},
+};
+
+static struct platform_device *ms7724se_ceu_devices[] __initdata = {
+	&ceu0_device,
+	&ceu1_device,
+};
+
+static struct platform_device *ms7724se_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&lcdc_device,
+	&nor_flash_device,
+	&keysc_device,
+	&sh_eth_device,
+	&sh7724_usb0_host_device,
+	&sh7724_usb1_gadget_device,
+	&fsi_device,
+	&fsi_ak4642_device,
+	&sdhi0_cn7_device,
+	&sdhi1_cn8_device,
+	&irda_device,
+	&vou_device,
+};
+
+/* I2C device */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("ak4642", 0x12),
+	},
+};
+
+#define EEPROM_OP   0xBA206000
+#define EEPROM_ADR  0xBA206004
+#define EEPROM_DATA 0xBA20600C
+#define EEPROM_STAT 0xBA206010
+#define EEPROM_STRT 0xBA206014
+
+static int __init sh_eth_is_eeprom_ready(void)
+{
+	int t = 10000;
+
+	while (t--) {
+		if (!__raw_readw(EEPROM_STAT))
+			return 1;
+		udelay(1);
+	}
+
+	printk(KERN_ERR "ms7724se can not access to eeprom\n");
+	return 0;
+}
+
+static void __init sh_eth_init(void)
+{
+	int i;
+	u16 mac;
+
+	/* check EEPROM status */
+	if (!sh_eth_is_eeprom_ready())
+		return;
+
+	/* read MAC addr from EEPROM */
+	for (i = 0 ; i < 3 ; i++) {
+		__raw_writew(0x0, EEPROM_OP); /* read */
+		__raw_writew(i*2, EEPROM_ADR);
+		__raw_writew(0x1, EEPROM_STRT);
+		if (!sh_eth_is_eeprom_ready())
+			return;
+
+		mac = __raw_readw(EEPROM_DATA);
+		sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
+		sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
+	}
+}
+
+#define SW4140    0xBA201000
+#define FPGA_OUT  0xBA200400
+#define PORT_HIZA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
+
+#define SW41_A    0x0100
+#define SW41_B    0x0200
+#define SW41_C    0x0400
+#define SW41_D    0x0800
+#define SW41_E    0x1000
+#define SW41_F    0x2000
+#define SW41_G    0x4000
+#define SW41_H    0x8000
+
+extern char ms7724se_sdram_enter_start;
+extern char ms7724se_sdram_enter_end;
+extern char ms7724se_sdram_leave_start;
+extern char ms7724se_sdram_leave_end;
+
+static int __init arch_setup(void)
+{
+	/* enable I2C device */
+	i2c_register_board_info(0, i2c0_devices,
+				ARRAY_SIZE(i2c0_devices));
+	return 0;
+}
+arch_initcall(arch_setup);
+
+static int __init devices_setup(void)
+{
+	u16 sw = __raw_readw(SW4140); /* select camera, monitor */
+	struct clk *clk;
+	u16 fpga_out;
+
+	/* register board specific self-refresh code */
+	sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+					SUSP_SH_RSTANDBY,
+					&ms7724se_sdram_enter_start,
+					&ms7724se_sdram_enter_end,
+					&ms7724se_sdram_leave_start,
+					&ms7724se_sdram_leave_end);
+
+	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+				     ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+
+	/* Reset Release */
+	fpga_out = __raw_readw(FPGA_OUT);
+	/* bit4: NTSC_PDN, bit5: NTSC_RESET */
+	fpga_out &= ~((1 << 1)  | /* LAN */
+		      (1 << 4)  | /* AK8813 PDN */
+		      (1 << 5)  | /* AK8813 RESET */
+		      (1 << 6)  | /* VIDEO DAC */
+		      (1 << 7)  | /* AK4643 */
+		      (1 << 8)  | /* IrDA */
+		      (1 << 12) | /* USB0 */
+		      (1 << 14)); /* RMII */
+	__raw_writew(fpga_out | (1 << 4), FPGA_OUT);
+
+	udelay(10);
+
+	/* AK8813 RESET */
+	__raw_writew(fpga_out | (1 << 5), FPGA_OUT);
+
+	udelay(10);
+
+	__raw_writew(fpga_out, FPGA_OUT);
+
+	/* turn on USB clocks, use external clock */
+	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);
+
+	/* Let LED9 show STATUS2 */
+	gpio_request(GPIO_FN_STATUS2, NULL);
+
+	/* Lit LED10 show STATUS0 */
+	gpio_request(GPIO_FN_STATUS0, NULL);
+
+	/* Lit LED11 show PDSTATUS */
+	gpio_request(GPIO_FN_PDSTATUS, NULL);
+
+	/* enable USB0 port */
+	__raw_writew(0x0600, 0xa40501d4);
+
+	/* enable USB1 port */
+	__raw_writew(0x0600, 0xa4050192);
+
+	/* enable IRQ 0,1,2 */
+	gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+	gpio_request(GPIO_FN_INTC_IRQ1, NULL);
+	gpio_request(GPIO_FN_INTC_IRQ2, NULL);
+
+	/* enable SCIFA3 */
+	gpio_request(GPIO_FN_SCIF3_I_SCK, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_RXD, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_TXD, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_CTS, NULL);
+	gpio_request(GPIO_FN_SCIF3_I_RTS, NULL);
+
+	/* enable LCDC */
+	gpio_request(GPIO_FN_LCDD23,   NULL);
+	gpio_request(GPIO_FN_LCDD22,   NULL);
+	gpio_request(GPIO_FN_LCDD21,   NULL);
+	gpio_request(GPIO_FN_LCDD20,   NULL);
+	gpio_request(GPIO_FN_LCDD19,   NULL);
+	gpio_request(GPIO_FN_LCDD18,   NULL);
+	gpio_request(GPIO_FN_LCDD17,   NULL);
+	gpio_request(GPIO_FN_LCDD16,   NULL);
+	gpio_request(GPIO_FN_LCDD15,   NULL);
+	gpio_request(GPIO_FN_LCDD14,   NULL);
+	gpio_request(GPIO_FN_LCDD13,   NULL);
+	gpio_request(GPIO_FN_LCDD12,   NULL);
+	gpio_request(GPIO_FN_LCDD11,   NULL);
+	gpio_request(GPIO_FN_LCDD10,   NULL);
+	gpio_request(GPIO_FN_LCDD9,    NULL);
+	gpio_request(GPIO_FN_LCDD8,    NULL);
+	gpio_request(GPIO_FN_LCDD7,    NULL);
+	gpio_request(GPIO_FN_LCDD6,    NULL);
+	gpio_request(GPIO_FN_LCDD5,    NULL);
+	gpio_request(GPIO_FN_LCDD4,    NULL);
+	gpio_request(GPIO_FN_LCDD3,    NULL);
+	gpio_request(GPIO_FN_LCDD2,    NULL);
+	gpio_request(GPIO_FN_LCDD1,    NULL);
+	gpio_request(GPIO_FN_LCDD0,    NULL);
+	gpio_request(GPIO_FN_LCDDISP,  NULL);
+	gpio_request(GPIO_FN_LCDHSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDCK,   NULL);
+	gpio_request(GPIO_FN_LCDVSYN,  NULL);
+	gpio_request(GPIO_FN_LCDDON,   NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDRD,    NULL);
+	gpio_request(GPIO_FN_LCDLCLK,  NULL);
+	__raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA);
+
+	/* enable CEU0 */
+	gpio_request(GPIO_FN_VIO0_D15, NULL);
+	gpio_request(GPIO_FN_VIO0_D14, NULL);
+	gpio_request(GPIO_FN_VIO0_D13, NULL);
+	gpio_request(GPIO_FN_VIO0_D12, NULL);
+	gpio_request(GPIO_FN_VIO0_D11, NULL);
+	gpio_request(GPIO_FN_VIO0_D10, NULL);
+	gpio_request(GPIO_FN_VIO0_D9,  NULL);
+	gpio_request(GPIO_FN_VIO0_D8,  NULL);
+	gpio_request(GPIO_FN_VIO0_D7,  NULL);
+	gpio_request(GPIO_FN_VIO0_D6,  NULL);
+	gpio_request(GPIO_FN_VIO0_D5,  NULL);
+	gpio_request(GPIO_FN_VIO0_D4,  NULL);
+	gpio_request(GPIO_FN_VIO0_D3,  NULL);
+	gpio_request(GPIO_FN_VIO0_D2,  NULL);
+	gpio_request(GPIO_FN_VIO0_D1,  NULL);
+	gpio_request(GPIO_FN_VIO0_D0,  NULL);
+	gpio_request(GPIO_FN_VIO0_VD,  NULL);
+	gpio_request(GPIO_FN_VIO0_CLK, NULL);
+	gpio_request(GPIO_FN_VIO0_FLD, NULL);
+	gpio_request(GPIO_FN_VIO0_HD,  NULL);
+
+	/* enable CEU1 */
+	gpio_request(GPIO_FN_VIO1_D7,  NULL);
+	gpio_request(GPIO_FN_VIO1_D6,  NULL);
+	gpio_request(GPIO_FN_VIO1_D5,  NULL);
+	gpio_request(GPIO_FN_VIO1_D4,  NULL);
+	gpio_request(GPIO_FN_VIO1_D3,  NULL);
+	gpio_request(GPIO_FN_VIO1_D2,  NULL);
+	gpio_request(GPIO_FN_VIO1_D1,  NULL);
+	gpio_request(GPIO_FN_VIO1_D0,  NULL);
+	gpio_request(GPIO_FN_VIO1_FLD, NULL);
+	gpio_request(GPIO_FN_VIO1_HD,  NULL);
+	gpio_request(GPIO_FN_VIO1_VD,  NULL);
+	gpio_request(GPIO_FN_VIO1_CLK, NULL);
+
+	/* KEYSC */
+	gpio_request(GPIO_FN_KEYOUT5_IN5, NULL);
+	gpio_request(GPIO_FN_KEYOUT4_IN6, NULL);
+	gpio_request(GPIO_FN_KEYIN4,      NULL);
+	gpio_request(GPIO_FN_KEYIN3,      NULL);
+	gpio_request(GPIO_FN_KEYIN2,      NULL);
+	gpio_request(GPIO_FN_KEYIN1,      NULL);
+	gpio_request(GPIO_FN_KEYIN0,      NULL);
+	gpio_request(GPIO_FN_KEYOUT3,     NULL);
+	gpio_request(GPIO_FN_KEYOUT2,     NULL);
+	gpio_request(GPIO_FN_KEYOUT1,     NULL);
+	gpio_request(GPIO_FN_KEYOUT0,     NULL);
+
+	/* enable FSI */
+	gpio_request(GPIO_FN_FSIMCKA,    NULL);
+	gpio_request(GPIO_FN_FSIIASD,    NULL);
+	gpio_request(GPIO_FN_FSIOASD,    NULL);
+	gpio_request(GPIO_FN_FSIIABCK,   NULL);
+	gpio_request(GPIO_FN_FSIIALRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOABCK,   NULL);
+	gpio_request(GPIO_FN_FSIOALRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
+
+	/* set SPU2 clock to 83.4 MHz */
+	clk = clk_get(NULL, "spu_clk");
+	if (!IS_ERR(clk)) {
+		clk_set_rate(clk, clk_round_rate(clk, 83333333));
+		clk_put(clk);
+	}
+
+	/* change parent of FSI A */
+	clk = clk_get(NULL, "fsia_clk");
+	if (!IS_ERR(clk)) {
+		/* 48kHz dummy clock was used to make sure 1/1 divide */
+		clk_set_rate(&sh7724_fsimcka_clk, 48000);
+		clk_set_parent(clk, &sh7724_fsimcka_clk);
+		clk_set_rate(clk, 48000);
+		clk_put(clk);
+	}
+
+	/* SDHI0 connected to cn7 */
+	gpio_request(GPIO_FN_SDHI0CD, NULL);
+	gpio_request(GPIO_FN_SDHI0WP, NULL);
+	gpio_request(GPIO_FN_SDHI0D3, NULL);
+	gpio_request(GPIO_FN_SDHI0D2, NULL);
+	gpio_request(GPIO_FN_SDHI0D1, NULL);
+	gpio_request(GPIO_FN_SDHI0D0, NULL);
+	gpio_request(GPIO_FN_SDHI0CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
+	/* SDHI1 connected to cn8 */
+	gpio_request(GPIO_FN_SDHI1CD, NULL);
+	gpio_request(GPIO_FN_SDHI1WP, NULL);
+	gpio_request(GPIO_FN_SDHI1D3, NULL);
+	gpio_request(GPIO_FN_SDHI1D2, NULL);
+	gpio_request(GPIO_FN_SDHI1D1, NULL);
+	gpio_request(GPIO_FN_SDHI1D0, NULL);
+	gpio_request(GPIO_FN_SDHI1CMD, NULL);
+	gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
+	/* enable IrDA */
+	gpio_request(GPIO_FN_IRDA_OUT, NULL);
+	gpio_request(GPIO_FN_IRDA_IN,  NULL);
+
+	/*
+	 * enable SH-Eth
+	 *
+	 * please remove J33 pin from your board !!
+	 *
+	 * ms7724 board should not use GPIO_FN_LNKSTA pin
+	 * So, This time PTX5 is set to input pin
+	 */
+	gpio_request(GPIO_FN_RMII_RXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_RXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD0,    NULL);
+	gpio_request(GPIO_FN_RMII_TXD1,    NULL);
+	gpio_request(GPIO_FN_RMII_REF_CLK, NULL);
+	gpio_request(GPIO_FN_RMII_TX_EN,   NULL);
+	gpio_request(GPIO_FN_RMII_RX_ER,   NULL);
+	gpio_request(GPIO_FN_RMII_CRS_DV,  NULL);
+	gpio_request(GPIO_FN_MDIO,         NULL);
+	gpio_request(GPIO_FN_MDC,          NULL);
+	gpio_request(GPIO_PTX5, NULL);
+	gpio_direction_input(GPIO_PTX5);
+	sh_eth_init();
+
+	if (sw & SW41_B) {
+		/* 720p */
+		lcdc_info.ch[0].lcd_modes = lcdc_720p_modes;
+		lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_720p_modes);
+	} else {
+		/* VGA */
+		lcdc_info.ch[0].lcd_modes = lcdc_vga_modes;
+		lcdc_info.ch[0].num_modes = ARRAY_SIZE(lcdc_vga_modes);
+	}
+
+	if (sw & SW41_A) {
+		/* Digital monitor */
+		lcdc_info.ch[0].interface_type = RGB18;
+		lcdc_info.ch[0].flags          = 0;
+	} else {
+		/* Analog monitor */
+		lcdc_info.ch[0].interface_type = RGB24;
+		lcdc_info.ch[0].flags          = LCDC_FLAGS_DWPOL;
+	}
+
+	/* VOU */
+	gpio_request(GPIO_FN_DV_D15, NULL);
+	gpio_request(GPIO_FN_DV_D14, NULL);
+	gpio_request(GPIO_FN_DV_D13, NULL);
+	gpio_request(GPIO_FN_DV_D12, NULL);
+	gpio_request(GPIO_FN_DV_D11, NULL);
+	gpio_request(GPIO_FN_DV_D10, NULL);
+	gpio_request(GPIO_FN_DV_D9, NULL);
+	gpio_request(GPIO_FN_DV_D8, NULL);
+	gpio_request(GPIO_FN_DV_CLKI, NULL);
+	gpio_request(GPIO_FN_DV_CLK, NULL);
+	gpio_request(GPIO_FN_DV_VSYNC, NULL);
+	gpio_request(GPIO_FN_DV_HSYNC, NULL);
+
+	/* Initialize CEU platform devices separately to map memory first */
+	device_initialize(&ms7724se_ceu_devices[0]->dev);
+	dma_declare_coherent_memory(&ms7724se_ceu_devices[0]->dev,
+				    ceu0_dma_membase, ceu0_dma_membase,
+				    CEU_BUFFER_MEMORY_SIZE);
+	platform_device_add(ms7724se_ceu_devices[0]);
+
+	device_initialize(&ms7724se_ceu_devices[1]->dev);
+	dma_declare_coherent_memory(&ms7724se_ceu_devices[1]->dev,
+				    ceu1_dma_membase, ceu1_dma_membase,
+				    CEU_BUFFER_MEMORY_SIZE);
+	platform_device_add(ms7724se_ceu_devices[1]);
+
+	return platform_add_devices(ms7724se_devices,
+				    ARRAY_SIZE(ms7724se_devices));
+}
+device_initcall(devices_setup);
+
+/* Reserve a portion of memory for CEU 0 and CEU 1 buffers */
+static void __init ms7724se_mv_mem_reserve(void)
+{
+	phys_addr_t phys;
+	phys_addr_t size = CEU_BUFFER_MEMORY_SIZE;
+
+	phys = memblock_phys_alloc(size, PAGE_SIZE);
+	if (!phys)
+		panic("Failed to allocate CEU0 memory\n");
+
+	memblock_free(phys, size);
+	memblock_remove(phys, size);
+	ceu0_dma_membase = phys;
+
+	phys = memblock_phys_alloc(size, PAGE_SIZE);
+	if (!phys)
+		panic("Failed to allocate CEU1 memory\n");
+
+	memblock_free(phys, size);
+	memblock_remove(phys, size);
+	ceu1_dma_membase = phys;
+}
+
+static struct sh_machine_vector mv_ms7724se __initmv = {
+	.mv_name	= "ms7724se",
+	.mv_init_irq	= init_se7724_IRQ,
+	.mv_mem_reserve	= ms7724se_mv_mem_reserve,
+};
diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
new file mode 100644
index 000000000..2406d3e35
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the 7751 SolutionEngine specific parts of the kernel
+#
+
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
new file mode 100644
index 000000000..dcefe58d8
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/irq.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7751/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <mach-se/mach/se7751.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	{ 13, 3, 3, 2 },
+	/* Add additional entries here as drivers are added and tested. */
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-se7751",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7751se_IRQ(void)
+{
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
new file mode 100644
index 000000000..4c4806055
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7751/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7751_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init se7751_devices_setup(void)
+{
+	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
+}
+device_initcall(se7751_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7751se __initmv = {
+	.mv_name		= "7751 SolutionEngine",
+	.mv_init_irq		= init_7751se_IRQ,
+};
diff --git a/arch/sh/boards/mach-se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
new file mode 100644
index 000000000..1f6669ab1
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the HITACHI UL SolutionEngine 7780 specific parts of the kernel
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+#
+
+obj-y	 := setup.o irq.o
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
new file mode 100644
index 000000000..d427dfd71
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7780/irq.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7780.h>
+
+#define INTC_BASE	0xffd00000
+#define INTC_ICR1	(INTC_BASE+0x1c)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7780_IRQ(void)
+{
+	/* enable all interrupt at FPGA */
+	__raw_writew(0, FPGA_INTMSK1);
+	/* mask SM501 interrupt */
+	__raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+	/* enable all interrupt at FPGA */
+	__raw_writew(0, FPGA_INTMSK2);
+
+	/* set FPGA INTSEL register */
+	/* FPGA + 0x06 */
+	__raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) |
+		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
+
+	/* FPGA + 0x08 */
+	__raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
+		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
+		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
+
+	/* FPGA + 0x0A */
+	__raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+
+	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+
+	/* ICR1: detect low level(for 2ndcut) */
+	__raw_writel(0xAAAA0000, INTC_ICR1);
+
+	/*
+	 * FPGA PCISEL register initialize
+	 *
+	 *  CPU  || SLOT1 | SLOT2 | S-ATA | USB
+	 *  -------------------------------------
+	 *  INTA || INTA  | INTD  |  --   | INTB
+	 *  -------------------------------------
+	 *  INTB || INTB  | INTA  |  --   | INTC
+	 *  -------------------------------------
+	 *  INTC || INTC  | INTB  | INTA  |  --
+	 *  -------------------------------------
+	 *  INTD || INTD  | INTC  |  --   | INTA
+	 *  -------------------------------------
+	 */
+	__raw_writew(0x0013, FPGA_PCI_INTSEL1);
+	__raw_writew(0xE402, FPGA_PCI_INTSEL2);
+}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
new file mode 100644
index 000000000..309f26813
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linux/arch/sh/boards/se/7780/setup.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7780.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+/* Heartbeat */
+static struct resource heartbeat_resource = {
+	.start  = PA_LED,
+	.end    = PA_LED,
+	.flags  = IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.num_resources  = 1,
+	.resource       = &heartbeat_resource,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *se7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init se7780_devices_setup(void)
+{
+	return platform_add_devices(se7780_devices,
+		ARRAY_SIZE(se7780_devices));
+}
+device_initcall(se7780_devices_setup);
+
+#define GPIO_PHCR        0xFFEA000E
+#define GPIO_PMSELR      0xFFEA0080
+#define GPIO_PECR        0xFFEA0008
+
+static void __init se7780_setup(char **cmdline_p)
+{
+	/* "SH-Linux" on LED Display */
+	__raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+	__raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+	__raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+	__raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+	__raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+	__raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+	__raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+	__raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+
+	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
+
+	/*
+	 * PCI REQ/GNT setting
+	 *   REQ0/GNT0 -> USB
+	 *   REQ1/GNT1 -> PC Card
+	 *   REQ2/GNT2 -> Serial ATA
+	 *   REQ3/GNT3 -> PCI slot
+	 */
+	__raw_writew(0x0213, FPGA_REQSEL);
+
+	/* GPIO setting */
+	__raw_writew(0x0000, GPIO_PECR);
+	__raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+	__raw_writew(0x0c00, GPIO_PMSELR);
+
+	/* iVDR Power ON */
+	__raw_writew(0x0001, FPGA_IVDRPW);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name                = "Solution Engine 7780" ,
+	.mv_setup               = se7780_setup ,
+	.mv_init_irq		= init_se7780_IRQ,
+};
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
new file mode 100644
index 000000000..8f69fc147
--- /dev/null
+++ b/arch/sh/boards/mach-se/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE)	+= 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/
+obj-$(CONFIG_SH_7724_SOLUTION_ENGINE)	+= 7724/
diff --git a/arch/sh/boards/mach-se/board-se7619.c b/arch/sh/boards/mach-se/board-se7619.c
new file mode 100644
index 000000000..4431da64a
--- /dev/null
+++ b/arch/sh/boards/mach-se/board-se7619.c
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * arch/sh/boards/se/7619/setup.c
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ *
+ * Hitachi SH7619 SolutionEngine Support.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+static int se7619_mode_pins(void)
+{
+	return MODE_PIN2 | MODE_PIN0;
+}
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_mode_pins		= se7619_mode_pins,
+};