Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1357 insertions, 0 deletions

diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
new file mode 100644
index 000000000..d58940280
--- /dev/null
+++ b/arch/sparc/kernel/entry.S
@@ -0,0 +1,1357 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* arch/sparc/kernel/entry.S:  Sparc trap low-level entry points.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
+ * Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
+ * Copyright (C) 1996-1999 Jakub Jelinek   (jj@sunsite.mff.cuni.cz)
+ * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
+ */
+
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/pgtable.h>
+
+#include <asm/head.h>
+#include <asm/asi.h>
+#include <asm/smp.h>
+#include <asm/contregs.h>
+#include <asm/ptrace.h>
+#include <asm/asm-offsets.h>
+#include <asm/psr.h>
+#include <asm/vaddrs.h>
+#include <asm/page.h>
+#include <asm/winmacro.h>
+#include <asm/signal.h>
+#include <asm/obio.h>
+#include <asm/mxcc.h>
+#include <asm/thread_info.h>
+#include <asm/param.h>
+#include <asm/unistd.h>
+
+#include <asm/asmmacro.h>
+#include <asm/export.h>
+
+#define curptr      g6
+
+/* These are just handy. */
+#define _SV	save	%sp, -STACKFRAME_SZ, %sp
+#define _RS     restore 
+
+#define FLUSH_ALL_KERNEL_WINDOWS \
+	_SV; _SV; _SV; _SV; _SV; _SV; _SV; \
+	_RS; _RS; _RS; _RS; _RS; _RS; _RS;
+
+	.text
+
+#ifdef CONFIG_KGDB
+	.align	4
+	.globl		arch_kgdb_breakpoint
+	.type		arch_kgdb_breakpoint,#function
+arch_kgdb_breakpoint:
+	ta		0x7d
+	retl
+	 nop
+	.size		arch_kgdb_breakpoint,.-arch_kgdb_breakpoint
+#endif
+
+#if defined(CONFIG_BLK_DEV_FD) || defined(CONFIG_BLK_DEV_FD_MODULE)
+	.align	4
+	.globl	floppy_hardint
+floppy_hardint:
+	/*
+	 * This code cannot touch registers %l0 %l1 and %l2
+	 * because SAVE_ALL depends on their values. It depends
+	 * on %l3 also, but we regenerate it before a call.
+	 * Other registers are:
+	 * %l3 -- base address of fdc registers
+	 * %l4 -- pdma_vaddr
+	 * %l5 -- scratch for ld/st address
+	 * %l6 -- pdma_size
+	 * %l7 -- scratch [floppy byte, ld/st address, aux. data]
+	 */
+
+	/* Do we have work to do? */
+	sethi	%hi(doing_pdma), %l7
+	ld	[%l7 + %lo(doing_pdma)], %l7
+	cmp	%l7, 0
+	be	floppy_dosoftint
+	 nop
+
+	/* Load fdc register base */
+	sethi	%hi(fdc_status), %l3
+	ld	[%l3 + %lo(fdc_status)], %l3
+
+	/* Setup register addresses */
+	sethi	%hi(pdma_vaddr), %l5	! transfer buffer
+	ld	[%l5 + %lo(pdma_vaddr)], %l4
+	sethi	%hi(pdma_size), %l5	! bytes to go
+	ld	[%l5 + %lo(pdma_size)], %l6
+next_byte:
+  	ldub	[%l3], %l7
+
+	andcc	%l7, 0x80, %g0		! Does fifo still have data
+	bz	floppy_fifo_emptied	! fifo has been emptied...
+	 andcc	%l7, 0x20, %g0		! in non-dma mode still?
+	bz	floppy_overrun		! nope, overrun
+	 andcc	%l7, 0x40, %g0		! 0=write 1=read
+	bz	floppy_write
+	 sub	%l6, 0x1, %l6
+
+	/* Ok, actually read this byte */
+	ldub	[%l3 + 1], %l7
+	orcc	%g0, %l6, %g0
+	stb	%l7, [%l4]
+	bne	next_byte
+	 add	%l4, 0x1, %l4
+
+	b	floppy_tdone
+	 nop
+
+floppy_write:
+	/* Ok, actually write this byte */
+	ldub	[%l4], %l7
+	orcc	%g0, %l6, %g0
+	stb	%l7, [%l3 + 1]
+	bne	next_byte
+	 add	%l4, 0x1, %l4
+
+	/* fall through... */
+floppy_tdone:
+	sethi	%hi(pdma_vaddr), %l5
+	st	%l4, [%l5 + %lo(pdma_vaddr)]
+	sethi	%hi(pdma_size), %l5
+	st	%l6, [%l5 + %lo(pdma_size)]
+	/* Flip terminal count pin */
+	set	auxio_register, %l7
+	ld	[%l7], %l7
+
+	ldub	[%l7], %l5
+
+	or	%l5, 0xc2, %l5
+	stb	%l5, [%l7]
+	andn    %l5, 0x02, %l5
+
+2:
+	/* Kill some time so the bits set */
+	WRITE_PAUSE
+	WRITE_PAUSE
+
+	stb     %l5, [%l7]
+
+	/* Prevent recursion */
+	sethi	%hi(doing_pdma), %l7
+	b	floppy_dosoftint
+	 st	%g0, [%l7 + %lo(doing_pdma)]
+
+	/* We emptied the FIFO, but we haven't read everything
+	 * as of yet.  Store the current transfer address and
+	 * bytes left to read so we can continue when the next
+	 * fast IRQ comes in.
+	 */
+floppy_fifo_emptied:
+	sethi	%hi(pdma_vaddr), %l5
+	st	%l4, [%l5 + %lo(pdma_vaddr)]
+	sethi	%hi(pdma_size), %l7
+	st	%l6, [%l7 + %lo(pdma_size)]
+
+	/* Restore condition codes */
+	wr	%l0, 0x0, %psr
+	WRITE_PAUSE
+
+	jmp	%l1
+	rett	%l2
+
+floppy_overrun:
+	sethi	%hi(pdma_vaddr), %l5
+	st	%l4, [%l5 + %lo(pdma_vaddr)]
+	sethi	%hi(pdma_size), %l5
+	st	%l6, [%l5 + %lo(pdma_size)]
+	/* Prevent recursion */
+	sethi	%hi(doing_pdma), %l7
+	st	%g0, [%l7 + %lo(doing_pdma)]
+
+	/* fall through... */
+floppy_dosoftint:
+	rd	%wim, %l3
+	SAVE_ALL
+
+	/* Set all IRQs off. */
+	or	%l0, PSR_PIL, %l4
+	wr	%l4, 0x0, %psr
+	WRITE_PAUSE
+	wr	%l4, PSR_ET, %psr
+	WRITE_PAUSE
+
+	mov	11, %o0			! floppy irq level (unused anyway)
+	mov	%g0, %o1		! devid is not used in fast interrupts
+	call	sparc_floppy_irq
+	 add	%sp, STACKFRAME_SZ, %o2	! struct pt_regs *regs
+
+	RESTORE_ALL
+	
+#endif /* (CONFIG_BLK_DEV_FD) */
+
+	/* Bad trap handler */
+	.globl	bad_trap_handler
+bad_trap_handler:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0	! pt_regs
+	call	do_hw_interrupt
+	 mov	%l7, %o1		! trap number
+
+	RESTORE_ALL
+	
+/* For now all IRQ's not registered get sent here. handler_irq() will
+ * see if a routine is registered to handle this interrupt and if not
+ * it will say so on the console.
+ */
+
+	.align	4
+	.globl	real_irq_entry, patch_handler_irq
+real_irq_entry:
+	SAVE_ALL
+
+#ifdef CONFIG_SMP
+	.globl	patchme_maybe_smp_msg
+
+	cmp	%l7, 11
+patchme_maybe_smp_msg:
+	bgu	maybe_smp4m_msg
+	 nop
+#endif
+
+real_irq_continue:
+	or	%l0, PSR_PIL, %g2
+	wr	%g2, 0x0, %psr
+	WRITE_PAUSE
+	wr	%g2, PSR_ET, %psr
+	WRITE_PAUSE
+	mov	%l7, %o0		! irq level
+patch_handler_irq:
+	call	handler_irq
+	 add	%sp, STACKFRAME_SZ, %o1	! pt_regs ptr
+	or	%l0, PSR_PIL, %g2	! restore PIL after handler_irq
+	wr	%g2, PSR_ET, %psr	! keep ET up
+	WRITE_PAUSE
+
+	RESTORE_ALL
+
+#ifdef CONFIG_SMP
+	/* SMP per-cpu ticker interrupts are handled specially. */
+smp4m_ticker:
+	bne	real_irq_continue+4
+	 or	%l0, PSR_PIL, %g2
+	wr	%g2, 0x0, %psr
+	WRITE_PAUSE
+	wr	%g2, PSR_ET, %psr
+	WRITE_PAUSE
+	call	smp4m_percpu_timer_interrupt
+	 add	%sp, STACKFRAME_SZ, %o0
+	wr	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+	RESTORE_ALL
+
+#define GET_PROCESSOR4M_ID(reg)	\
+	rd	%tbr, %reg;	\
+	srl	%reg, 12, %reg;	\
+	and	%reg, 3, %reg;
+
+	/* Here is where we check for possible SMP IPI passed to us
+	 * on some level other than 15 which is the NMI and only used
+	 * for cross calls.  That has a separate entry point below.
+	 *
+	 * IPIs are sent on Level 12, 13 and 14. See IRQ_IPI_*.
+	 */
+maybe_smp4m_msg:
+	GET_PROCESSOR4M_ID(o3)
+	sethi	%hi(sun4m_irq_percpu), %l5
+	sll	%o3, 2, %o3
+	or	%l5, %lo(sun4m_irq_percpu), %o5
+	sethi	%hi(0x70000000), %o2	! Check all soft-IRQs
+	ld	[%o5 + %o3], %o1
+	ld	[%o1 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
+	andcc	%o3, %o2, %g0
+	be,a	smp4m_ticker
+	 cmp	%l7, 14
+	/* Soft-IRQ IPI */
+	st	%o2, [%o1 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x70000000
+	WRITE_PAUSE
+	ld	[%o1 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
+	WRITE_PAUSE
+	or	%l0, PSR_PIL, %l4
+	wr	%l4, 0x0, %psr
+	WRITE_PAUSE
+	wr	%l4, PSR_ET, %psr
+	WRITE_PAUSE
+	srl	%o3, 28, %o2		! shift for simpler checks below
+maybe_smp4m_msg_check_single:
+	andcc	%o2, 0x1, %g0
+	beq,a	maybe_smp4m_msg_check_mask
+	 andcc	%o2, 0x2, %g0
+	call	smp_call_function_single_interrupt
+	 nop
+	andcc	%o2, 0x2, %g0
+maybe_smp4m_msg_check_mask:
+	beq,a	maybe_smp4m_msg_check_resched
+	 andcc	%o2, 0x4, %g0
+	call	smp_call_function_interrupt
+	 nop
+	andcc	%o2, 0x4, %g0
+maybe_smp4m_msg_check_resched:
+	/* rescheduling is done in RESTORE_ALL regardless, but incr stats */
+	beq,a	maybe_smp4m_msg_out
+	 nop
+	call	smp_resched_interrupt
+	 nop
+maybe_smp4m_msg_out:
+	RESTORE_ALL
+
+	.align	4
+	.globl	linux_trap_ipi15_sun4m
+linux_trap_ipi15_sun4m:
+	SAVE_ALL
+	sethi	%hi(0x80000000), %o2
+	GET_PROCESSOR4M_ID(o0)
+	sethi	%hi(sun4m_irq_percpu), %l5
+	or	%l5, %lo(sun4m_irq_percpu), %o5
+	sll	%o0, 2, %o0
+	ld	[%o5 + %o0], %o5
+	ld	[%o5 + 0x00], %o3	! sun4m_irq_percpu[cpu]->pending
+	andcc	%o3, %o2, %g0
+	be	sun4m_nmi_error		! Must be an NMI async memory error
+	 st	%o2, [%o5 + 0x04]	! sun4m_irq_percpu[cpu]->clear=0x80000000
+	WRITE_PAUSE
+	ld	[%o5 + 0x00], %g0	! sun4m_irq_percpu[cpu]->pending
+	WRITE_PAUSE
+	or	%l0, PSR_PIL, %l4
+	wr	%l4, 0x0, %psr
+	WRITE_PAUSE
+	wr	%l4, PSR_ET, %psr
+	WRITE_PAUSE
+	call	smp4m_cross_call_irq
+	 nop
+	b	ret_trap_lockless_ipi
+	 clr	%l6
+
+	.globl	smp4d_ticker
+	/* SMP per-cpu ticker interrupts are handled specially. */
+smp4d_ticker:
+	SAVE_ALL
+	or	%l0, PSR_PIL, %g2
+	sethi	%hi(CC_ICLR), %o0
+	sethi	%hi(1 << 14), %o1
+	or	%o0, %lo(CC_ICLR), %o0
+	stha	%o1, [%o0] ASI_M_MXCC	/* Clear PIL 14 in MXCC's ICLR */
+	wr	%g2, 0x0, %psr
+	WRITE_PAUSE
+	wr	%g2, PSR_ET, %psr
+	WRITE_PAUSE
+	call	smp4d_percpu_timer_interrupt
+	 add	%sp, STACKFRAME_SZ, %o0
+	wr	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+	RESTORE_ALL
+
+	.align	4
+	.globl	linux_trap_ipi15_sun4d
+linux_trap_ipi15_sun4d:
+	SAVE_ALL
+	sethi	%hi(CC_BASE), %o4
+	sethi	%hi(MXCC_ERR_ME|MXCC_ERR_PEW|MXCC_ERR_ASE|MXCC_ERR_PEE), %o2
+	or	%o4, (CC_EREG - CC_BASE), %o0
+	ldda	[%o0] ASI_M_MXCC, %o0
+	andcc	%o0, %o2, %g0
+	bne	1f
+	 sethi	%hi(BB_STAT2), %o2
+	lduba	[%o2] ASI_M_CTL, %o2
+	andcc	%o2, BB_STAT2_MASK, %g0
+	bne	2f
+	 or	%o4, (CC_ICLR - CC_BASE), %o0
+	sethi	%hi(1 << 15), %o1
+	stha	%o1, [%o0] ASI_M_MXCC	/* Clear PIL 15 in MXCC's ICLR */
+	or	%l0, PSR_PIL, %l4
+	wr	%l4, 0x0, %psr
+	WRITE_PAUSE
+	wr	%l4, PSR_ET, %psr
+	WRITE_PAUSE
+	call	smp4d_cross_call_irq
+	 nop
+	b	ret_trap_lockless_ipi
+	 clr	%l6
+
+1:	/* MXCC error */
+2:	/* BB error */
+	/* Disable PIL 15 */
+	set	CC_IMSK, %l4
+	lduha	[%l4] ASI_M_MXCC, %l5
+	sethi	%hi(1 << 15), %l7
+	or	%l5, %l7, %l5
+	stha	%l5, [%l4] ASI_M_MXCC
+	/* FIXME */
+1:	b,a	1b
+
+	.globl	smpleon_ipi
+	.extern leon_ipi_interrupt
+	/* SMP per-cpu IPI interrupts are handled specially. */
+smpleon_ipi:
+        SAVE_ALL
+	or	%l0, PSR_PIL, %g2
+	wr	%g2, 0x0, %psr
+	WRITE_PAUSE
+	wr	%g2, PSR_ET, %psr
+	WRITE_PAUSE
+	call	leonsmp_ipi_interrupt
+	 add	%sp, STACKFRAME_SZ, %o1 ! pt_regs
+	wr	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+	RESTORE_ALL
+
+	.align	4
+	.globl	linux_trap_ipi15_leon
+linux_trap_ipi15_leon:
+	SAVE_ALL
+	or	%l0, PSR_PIL, %l4
+	wr	%l4, 0x0, %psr
+	WRITE_PAUSE
+	wr	%l4, PSR_ET, %psr
+	WRITE_PAUSE
+	call	leon_cross_call_irq
+	 nop
+	b	ret_trap_lockless_ipi
+	 clr	%l6
+
+#endif /* CONFIG_SMP */
+
+	/* This routine handles illegal instructions and privileged
+	 * instruction attempts from user code.
+	 */
+	.align	4
+	.globl	bad_instruction
+bad_instruction:
+	sethi	%hi(0xc1f80000), %l4
+	ld	[%l1], %l5
+	sethi	%hi(0x81d80000), %l7
+	and	%l5, %l4, %l5
+	cmp	%l5, %l7
+	be	1f
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr		! re-enable traps
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	%l1, %o1
+	mov	%l2, %o2
+	call	do_illegal_instruction
+	 mov	%l0, %o3
+
+	RESTORE_ALL
+
+1:	/* unimplemented flush - just skip */
+	jmpl	%l2, %g0
+	 rett	%l2 + 4
+
+	.align	4
+	.globl	priv_instruction
+priv_instruction:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	%l1, %o1
+	mov	%l2, %o2
+	call	do_priv_instruction
+	 mov	%l0, %o3
+
+	RESTORE_ALL
+
+	/* This routine handles unaligned data accesses. */
+	.align	4
+	.globl	mna_handler
+mna_handler:
+	andcc	%l0, PSR_PS, %g0
+	be	mna_fromuser
+	 nop
+
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+
+	ld	[%l1], %o1
+	call	kernel_unaligned_trap
+	 add	%sp, STACKFRAME_SZ, %o0
+
+	RESTORE_ALL
+
+mna_fromuser:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr		! re-enable traps
+	WRITE_PAUSE
+
+	ld	[%l1], %o1
+	call	user_unaligned_trap
+	 add	%sp, STACKFRAME_SZ, %o0
+
+	RESTORE_ALL
+
+	/* This routine handles floating point disabled traps. */
+	.align	4
+	.globl	fpd_trap_handler
+fpd_trap_handler:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr		! re-enable traps
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	%l1, %o1
+	mov	%l2, %o2
+	call	do_fpd_trap
+	 mov	%l0, %o3
+
+	RESTORE_ALL
+
+	/* This routine handles Floating Point Exceptions. */
+	.align	4
+	.globl	fpe_trap_handler
+fpe_trap_handler:
+	set	fpsave_magic, %l5
+	cmp	%l1, %l5
+	be	1f
+	 sethi	%hi(fpsave), %l5
+	or	%l5, %lo(fpsave), %l5
+	cmp	%l1, %l5
+	bne	2f
+	 sethi	%hi(fpsave_catch2), %l5
+	or	%l5, %lo(fpsave_catch2), %l5
+	wr	%l0, 0x0, %psr
+	WRITE_PAUSE
+	jmp	%l5
+	 rett	%l5 + 4
+1:	
+	sethi	%hi(fpsave_catch), %l5
+	or	%l5, %lo(fpsave_catch), %l5
+	wr	%l0, 0x0, %psr
+	WRITE_PAUSE
+	jmp	%l5
+	 rett	%l5 + 4
+
+2:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr		! re-enable traps
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	%l1, %o1
+	mov	%l2, %o2
+	call	do_fpe_trap
+	 mov	%l0, %o3
+
+	RESTORE_ALL
+
+	/* This routine handles Tag Overflow Exceptions. */
+	.align	4
+	.globl	do_tag_overflow
+do_tag_overflow:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr		! re-enable traps
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	%l1, %o1
+	mov	%l2, %o2
+	call	handle_tag_overflow
+	 mov	%l0, %o3
+
+	RESTORE_ALL
+
+	/* This routine handles Watchpoint Exceptions. */
+	.align	4
+	.globl	do_watchpoint
+do_watchpoint:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr		! re-enable traps
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	%l1, %o1
+	mov	%l2, %o2
+	call	handle_watchpoint
+	 mov	%l0, %o3
+
+	RESTORE_ALL
+
+	/* This routine handles Register Access Exceptions. */
+	.align	4
+	.globl	do_reg_access
+do_reg_access:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr		! re-enable traps
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	%l1, %o1
+	mov	%l2, %o2
+	call	handle_reg_access
+	 mov	%l0, %o3
+
+	RESTORE_ALL
+
+	/* This routine handles Co-Processor Disabled Exceptions. */
+	.align	4
+	.globl	do_cp_disabled
+do_cp_disabled:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr		! re-enable traps
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	%l1, %o1
+	mov	%l2, %o2
+	call	handle_cp_disabled
+	 mov	%l0, %o3
+
+	RESTORE_ALL
+
+	/* This routine handles Co-Processor Exceptions. */
+	.align	4
+	.globl	do_cp_exception
+do_cp_exception:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr		! re-enable traps
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	%l1, %o1
+	mov	%l2, %o2
+	call	handle_cp_exception
+	 mov	%l0, %o3
+
+	RESTORE_ALL
+
+	/* This routine handles Hardware Divide By Zero Exceptions. */
+	.align	4
+	.globl	do_hw_divzero
+do_hw_divzero:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr		! re-enable traps
+	WRITE_PAUSE
+
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	%l1, %o1
+	mov	%l2, %o2
+	call	handle_hw_divzero
+	 mov	%l0, %o3
+
+	RESTORE_ALL
+
+	.align	4
+	.globl	do_flush_windows
+do_flush_windows:
+	SAVE_ALL
+
+	wr	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+
+	andcc	%l0, PSR_PS, %g0
+	bne	dfw_kernel
+	 nop
+
+	call	flush_user_windows
+	 nop
+
+	/* Advance over the trap instruction. */
+	ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1
+	add	%l1, 0x4, %l2
+	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
+	st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
+
+	RESTORE_ALL
+
+	.globl	flush_patch_one
+
+	/* We get these for debugging routines using __builtin_return_address() */
+dfw_kernel:
+flush_patch_one:
+	FLUSH_ALL_KERNEL_WINDOWS
+
+	/* Advance over the trap instruction. */
+	ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1
+	add	%l1, 0x4, %l2
+	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
+	st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
+
+	RESTORE_ALL
+
+	/* The getcc software trap.  The user wants the condition codes from
+	 * the %psr in register %g1.
+	 */
+
+	.align	4
+	.globl	getcc_trap_handler
+getcc_trap_handler:
+	srl	%l0, 20, %g1	! give user
+	and	%g1, 0xf, %g1	! only ICC bits in %psr
+	jmp	%l2		! advance over trap instruction
+	rett	%l2 + 0x4	! like this...
+
+	/* The setcc software trap.  The user has condition codes in %g1
+	 * that it would like placed in the %psr.  Be careful not to flip
+	 * any unintentional bits!
+	 */
+
+	.align	4
+	.globl	setcc_trap_handler
+setcc_trap_handler:
+	sll	%g1, 0x14, %l4
+	set	PSR_ICC, %l5
+	andn	%l0, %l5, %l0	! clear ICC bits in %psr
+	and	%l4, %l5, %l4	! clear non-ICC bits in user value
+	or	%l4, %l0, %l4	! or them in... mix mix mix
+
+	wr	%l4, 0x0, %psr	! set new %psr
+	WRITE_PAUSE		! TI scumbags...
+
+	jmp	%l2		! advance over trap instruction
+	rett	%l2 + 0x4	! like this...
+
+sun4m_nmi_error:
+	/* NMI async memory error handling. */
+	sethi	%hi(0x80000000), %l4
+	sethi	%hi(sun4m_irq_global), %o5
+	ld	[%o5 + %lo(sun4m_irq_global)], %l5
+	st	%l4, [%l5 + 0x0c]	! sun4m_irq_global->mask_set=0x80000000
+	WRITE_PAUSE
+	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
+	WRITE_PAUSE
+	or	%l0, PSR_PIL, %l4
+	wr	%l4, 0x0, %psr
+	WRITE_PAUSE
+	wr	%l4, PSR_ET, %psr
+	WRITE_PAUSE
+	call	sun4m_nmi
+	 nop
+	st	%l4, [%l5 + 0x08]	! sun4m_irq_global->mask_clear=0x80000000
+	WRITE_PAUSE
+	ld	[%l5 + 0x00], %g0	! sun4m_irq_global->pending
+	WRITE_PAUSE
+	RESTORE_ALL
+
+#ifndef CONFIG_SMP
+	.align	4
+	.globl	linux_trap_ipi15_sun4m
+linux_trap_ipi15_sun4m:
+	SAVE_ALL
+
+	ba	sun4m_nmi_error
+	 nop
+#endif /* CONFIG_SMP */
+
+	.align	4
+	.globl	srmmu_fault
+srmmu_fault:
+	mov	0x400, %l5
+	mov	0x300, %l4
+
+LEON_PI(lda	[%l5] ASI_LEON_MMUREGS, %l6)	! read sfar first
+SUN_PI_(lda	[%l5] ASI_M_MMUREGS, %l6)	! read sfar first
+
+LEON_PI(lda	[%l4] ASI_LEON_MMUREGS, %l5)	! read sfsr last
+SUN_PI_(lda	[%l4] ASI_M_MMUREGS, %l5)	! read sfsr last
+
+	andn	%l6, 0xfff, %l6
+	srl	%l5, 6, %l5			! and encode all info into l7
+
+	and	%l5, 2, %l5
+	or	%l5, %l6, %l6
+
+	or	%l6, %l7, %l7			! l7 = [addr,write,txtfault]
+
+	SAVE_ALL
+
+	mov	%l7, %o1
+	mov	%l7, %o2
+	and	%o1, 1, %o1		! arg2 = text_faultp
+	mov	%l7, %o3
+	and	%o2, 2, %o2		! arg3 = writep
+	andn	%o3, 0xfff, %o3		! arg4 = faulting address
+
+	wr	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+
+	call	do_sparc_fault
+	 add	%sp, STACKFRAME_SZ, %o0	! arg1 = pt_regs ptr
+
+	RESTORE_ALL
+
+	.align	4
+sunos_execv:
+	.globl	sunos_execv
+	b	sys_execve
+	 clr	%i2
+
+	.align	4
+	.globl	sys_sigstack
+sys_sigstack:
+	mov	%o7, %l5
+	mov	%fp, %o2
+	call	do_sys_sigstack
+	 mov	%l5, %o7
+
+	.align	4
+	.globl	sys_sigreturn
+sys_sigreturn:
+	call	do_sigreturn
+	 add	%sp, STACKFRAME_SZ, %o0
+
+	ld	[%curptr + TI_FLAGS], %l5
+	andcc	%l5, _TIF_SYSCALL_TRACE, %g0
+	be	1f
+	 nop
+
+	call	syscall_trace
+	 mov	1, %o1
+
+1:
+	/* We don't want to muck with user registers like a
+	 * normal syscall, just return.
+	 */
+	RESTORE_ALL
+
+	.align	4
+	.globl	sys_rt_sigreturn
+sys_rt_sigreturn:
+	call	do_rt_sigreturn
+	 add	%sp, STACKFRAME_SZ, %o0
+
+	ld	[%curptr + TI_FLAGS], %l5
+	andcc	%l5, _TIF_SYSCALL_TRACE, %g0
+	be	1f
+	 nop
+
+	add	%sp, STACKFRAME_SZ, %o0
+	call	syscall_trace
+	 mov	1, %o1
+
+1:
+	/* We are returning to a signal handler. */
+	RESTORE_ALL
+
+	/* Now that we have a real sys_clone, sys_fork() is
+	 * implemented in terms of it.  Our _real_ implementation
+	 * of SunOS vfork() will use sys_vfork().
+	 *
+	 * XXX These three should be consolidated into mostly shared
+	 * XXX code just like on sparc64... -DaveM
+	 */
+	.align	4
+	.globl	sys_fork, flush_patch_two
+sys_fork:
+	mov	%o7, %l5
+flush_patch_two:
+	FLUSH_ALL_KERNEL_WINDOWS;
+	ld	[%curptr + TI_TASK], %o4
+	rd	%psr, %g4
+	WRITE_PAUSE
+	rd	%wim, %g5
+	WRITE_PAUSE
+	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
+	add	%sp, STACKFRAME_SZ, %o0
+	call	sparc_fork
+	 mov	%l5, %o7
+
+	/* Whee, kernel threads! */
+	.globl	sys_clone, flush_patch_three
+sys_clone:
+	mov	%o7, %l5
+flush_patch_three:
+	FLUSH_ALL_KERNEL_WINDOWS;
+	ld	[%curptr + TI_TASK], %o4
+	rd	%psr, %g4
+	WRITE_PAUSE
+	rd	%wim, %g5
+	WRITE_PAUSE
+	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
+	add	%sp, STACKFRAME_SZ, %o0
+	call	sparc_clone
+	 mov	%l5, %o7
+
+	/* Whee, real vfork! */
+	.globl	sys_vfork, flush_patch_four
+sys_vfork:
+flush_patch_four:
+	FLUSH_ALL_KERNEL_WINDOWS;
+	ld	[%curptr + TI_TASK], %o4
+	rd	%psr, %g4
+	WRITE_PAUSE
+	rd	%wim, %g5
+	WRITE_PAUSE
+	std	%g4, [%o4 + AOFF_task_thread + AOFF_thread_fork_kpsr]
+	sethi	%hi(sparc_vfork), %l1
+	jmpl	%l1 + %lo(sparc_vfork), %g0
+	 add	%sp, STACKFRAME_SZ, %o0
+
+        .align  4
+linux_sparc_ni_syscall:
+	sethi   %hi(sys_ni_syscall), %l7
+	b       do_syscall
+	 or     %l7, %lo(sys_ni_syscall), %l7
+
+linux_syscall_trace:
+	add	%sp, STACKFRAME_SZ, %o0
+	call	syscall_trace
+	 mov	0, %o1
+	cmp	%o0, 0
+	bne	3f
+	 mov	-ENOSYS, %o0
+
+	/* Syscall tracing can modify the registers.  */
+	ld	[%sp + STACKFRAME_SZ + PT_G1], %g1
+	sethi	%hi(sys_call_table), %l7
+	ld	[%sp + STACKFRAME_SZ + PT_I0], %i0
+	or	%l7, %lo(sys_call_table), %l7
+	ld	[%sp + STACKFRAME_SZ + PT_I1], %i1
+	ld	[%sp + STACKFRAME_SZ + PT_I2], %i2
+	ld	[%sp + STACKFRAME_SZ + PT_I3], %i3
+	ld	[%sp + STACKFRAME_SZ + PT_I4], %i4
+	ld	[%sp + STACKFRAME_SZ + PT_I5], %i5
+	cmp	%g1, NR_syscalls
+	bgeu	3f
+	 mov	-ENOSYS, %o0
+
+	sll	%g1, 2, %l4
+	mov	%i0, %o0
+	ld	[%l7 + %l4], %l7
+	mov	%i1, %o1
+	mov	%i2, %o2
+	mov	%i3, %o3
+	b	2f
+	 mov	%i4, %o4
+
+	.globl	ret_from_fork
+ret_from_fork:
+	call	schedule_tail
+	 ld	[%g3 + TI_TASK], %o0
+	b	ret_sys_call
+	 ld	[%sp + STACKFRAME_SZ + PT_I0], %o0
+
+	.globl	ret_from_kernel_thread
+ret_from_kernel_thread:
+	call	schedule_tail
+	 ld	[%g3 + TI_TASK], %o0
+	ld	[%sp + STACKFRAME_SZ + PT_G1], %l0
+	call	%l0
+	 ld	[%sp + STACKFRAME_SZ + PT_G2], %o0
+	rd	%psr, %l1
+	ld	[%sp + STACKFRAME_SZ + PT_PSR], %l0
+	andn	%l0, PSR_CWP, %l0
+	nop
+	and	%l1, PSR_CWP, %l1
+	or	%l0, %l1, %l0
+	st	%l0, [%sp + STACKFRAME_SZ + PT_PSR]
+	b	ret_sys_call
+	 mov	0, %o0
+
+	/* Linux native system calls enter here... */
+	.align	4
+	.globl	linux_sparc_syscall
+linux_sparc_syscall:
+	sethi	%hi(PSR_SYSCALL), %l4
+	or	%l0, %l4, %l0
+	/* Direct access to user regs, must faster. */
+	cmp	%g1, NR_syscalls
+	bgeu	linux_sparc_ni_syscall
+	 sll	%g1, 2, %l4
+	ld	[%l7 + %l4], %l7
+
+do_syscall:
+	SAVE_ALL_HEAD
+	 rd	%wim, %l3
+
+	wr	%l0, PSR_ET, %psr
+	mov	%i0, %o0
+	mov	%i1, %o1
+	mov	%i2, %o2
+
+	ld	[%curptr + TI_FLAGS], %l5
+	mov	%i3, %o3
+	andcc	%l5, _TIF_SYSCALL_TRACE, %g0
+	mov	%i4, %o4
+	bne	linux_syscall_trace
+	 mov	%i0, %l5
+2:
+	call	%l7
+	 mov	%i5, %o5
+
+3:
+	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
+
+ret_sys_call:
+	ld	[%curptr + TI_FLAGS], %l6
+	cmp	%o0, -ERESTART_RESTARTBLOCK
+	ld	[%sp + STACKFRAME_SZ + PT_PSR], %g3
+	set	PSR_C, %g2
+	bgeu	1f
+	 andcc	%l6, _TIF_SYSCALL_TRACE, %g0
+
+	/* System call success, clear Carry condition code. */
+	andn	%g3, %g2, %g3
+	clr	%l6
+	st	%g3, [%sp + STACKFRAME_SZ + PT_PSR]	
+	bne	linux_syscall_trace2
+	 ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */
+	add	%l1, 0x4, %l2			/* npc = npc+4 */
+	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
+	b	ret_trap_entry
+	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
+1:
+	/* System call failure, set Carry condition code.
+	 * Also, get abs(errno) to return to the process.
+	 */
+	sub	%g0, %o0, %o0
+	or	%g3, %g2, %g3
+	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
+	mov	1, %l6
+	st	%g3, [%sp + STACKFRAME_SZ + PT_PSR]
+	bne	linux_syscall_trace2
+	 ld	[%sp + STACKFRAME_SZ + PT_NPC], %l1 /* pc = npc */
+	add	%l1, 0x4, %l2			/* npc = npc+4 */
+	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
+	b	ret_trap_entry
+	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
+
+linux_syscall_trace2:
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	1, %o1
+	call	syscall_trace
+	 add	%l1, 0x4, %l2			/* npc = npc+4 */
+	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
+	b	ret_trap_entry
+	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
+
+
+/* Saving and restoring the FPU state is best done from lowlevel code.
+ *
+ * void fpsave(unsigned long *fpregs, unsigned long *fsr,
+ *             void *fpqueue, unsigned long *fpqdepth)
+ */
+
+	.globl	fpsave
+fpsave:
+	st	%fsr, [%o1]	! this can trap on us if fpu is in bogon state
+	ld	[%o1], %g1
+	set	0x2000, %g4
+	andcc	%g1, %g4, %g0
+	be	2f
+	 mov	0, %g2
+
+	/* We have an fpqueue to save. */
+1:
+	std	%fq, [%o2]
+fpsave_magic:
+	st	%fsr, [%o1]
+	ld	[%o1], %g3
+	andcc	%g3, %g4, %g0
+	add	%g2, 1, %g2
+	bne	1b
+	 add	%o2, 8, %o2
+
+2:
+	st	%g2, [%o3]
+
+	std	%f0, [%o0 + 0x00]
+	std	%f2, [%o0 + 0x08]
+	std	%f4, [%o0 + 0x10]
+	std	%f6, [%o0 + 0x18]
+	std	%f8, [%o0 + 0x20]
+	std	%f10, [%o0 + 0x28]
+	std	%f12, [%o0 + 0x30]
+	std	%f14, [%o0 + 0x38]
+	std	%f16, [%o0 + 0x40]
+	std	%f18, [%o0 + 0x48]
+	std	%f20, [%o0 + 0x50]
+	std	%f22, [%o0 + 0x58]
+	std	%f24, [%o0 + 0x60]
+	std	%f26, [%o0 + 0x68]
+	std	%f28, [%o0 + 0x70]
+	retl
+	 std	%f30, [%o0 + 0x78]
+
+	/* Thanks for Theo Deraadt and the authors of the Sprite/netbsd/openbsd
+	 * code for pointing out this possible deadlock, while we save state
+	 * above we could trap on the fsr store so our low level fpu trap
+	 * code has to know how to deal with this.
+	 */
+fpsave_catch:
+	b	fpsave_magic + 4
+	 st	%fsr, [%o1]
+
+fpsave_catch2:
+	b	fpsave + 4
+	 st	%fsr, [%o1]
+
+	/* void fpload(unsigned long *fpregs, unsigned long *fsr); */
+
+	.globl	fpload
+fpload:
+	ldd	[%o0 + 0x00], %f0
+	ldd	[%o0 + 0x08], %f2
+	ldd	[%o0 + 0x10], %f4
+	ldd	[%o0 + 0x18], %f6
+	ldd	[%o0 + 0x20], %f8
+	ldd	[%o0 + 0x28], %f10
+	ldd	[%o0 + 0x30], %f12
+	ldd	[%o0 + 0x38], %f14
+	ldd	[%o0 + 0x40], %f16
+	ldd	[%o0 + 0x48], %f18
+	ldd	[%o0 + 0x50], %f20
+	ldd	[%o0 + 0x58], %f22
+	ldd	[%o0 + 0x60], %f24
+	ldd	[%o0 + 0x68], %f26
+	ldd	[%o0 + 0x70], %f28
+	ldd	[%o0 + 0x78], %f30
+	ld	[%o1], %fsr
+	retl
+	 nop
+
+	/* __ndelay and __udelay take two arguments:
+	 * 0 - nsecs or usecs to delay
+	 * 1 - per_cpu udelay_val (loops per jiffy)
+	 *
+	 * Note that ndelay gives HZ times higher resolution but has a 10ms
+	 * limit.  udelay can handle up to 1s.
+	 */
+	.globl	__ndelay
+__ndelay:
+	save	%sp, -STACKFRAME_SZ, %sp
+	mov	%i0, %o0		! round multiplier up so large ns ok
+	mov	0x1ae, %o1		! 2**32 / (1 000 000 000 / HZ)
+	umul	%o0, %o1, %o0
+	rd	%y, %o1
+	mov	%i1, %o1		! udelay_val
+	umul	%o0, %o1, %o0
+	rd	%y, %o1
+	ba	delay_continue
+	 mov	%o1, %o0		! >>32 later for better resolution
+
+	.globl	__udelay
+__udelay:
+	save	%sp, -STACKFRAME_SZ, %sp
+	mov	%i0, %o0
+	sethi	%hi(0x10c7), %o1	! round multiplier up so large us ok
+	or	%o1, %lo(0x10c7), %o1	! 2**32 / 1 000 000
+	umul	%o0, %o1, %o0
+	rd	%y, %o1
+	mov	%i1, %o1		! udelay_val
+	umul	%o0, %o1, %o0
+	rd	%y, %o1
+	sethi	%hi(0x028f4b62), %l0	! Add in rounding constant * 2**32,
+	or	%g0, %lo(0x028f4b62), %l0
+	addcc	%o0, %l0, %o0		! 2**32 * 0.009 999
+	bcs,a	3f
+	 add	%o1, 0x01, %o1
+3:
+	mov	HZ, %o0			! >>32 earlier for wider range
+	umul	%o0, %o1, %o0
+	rd	%y, %o1
+
+delay_continue:
+	cmp	%o0, 0x0
+1:
+	bne	1b
+	 subcc	%o0, 1, %o0
+	
+	ret
+	restore
+EXPORT_SYMBOL(__udelay)
+EXPORT_SYMBOL(__ndelay)
+
+	/* Handle a software breakpoint */
+	/* We have to inform parent that child has stopped */
+	.align 4
+	.globl breakpoint_trap
+breakpoint_trap:
+	rd	%wim,%l3
+	SAVE_ALL
+	wr 	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+
+	st	%i0, [%sp + STACKFRAME_SZ + PT_G0] ! for restarting syscalls
+	call	sparc_breakpoint
+	 add	%sp, STACKFRAME_SZ, %o0
+
+	RESTORE_ALL
+
+#ifdef CONFIG_KGDB
+	ENTRY(kgdb_trap_low)
+	rd	%wim,%l3
+	SAVE_ALL
+	wr 	%l0, PSR_ET, %psr
+	WRITE_PAUSE
+
+	mov	%l7, %o0		! trap_level
+	call	kgdb_trap
+	 add	%sp, STACKFRAME_SZ, %o1	! struct pt_regs *regs
+
+	RESTORE_ALL
+	ENDPROC(kgdb_trap_low)
+#endif
+
+	.align	4
+	.globl	flush_patch_exception
+flush_patch_exception:
+	FLUSH_ALL_KERNEL_WINDOWS;
+	ldd	[%o0], %o6
+	jmpl	%o7 + 0xc, %g0			! see asm-sparc/processor.h
+	 mov	1, %g1				! signal EFAULT condition
+
+	.align	4
+	.globl	kill_user_windows, kuw_patch1_7win
+	.globl	kuw_patch1
+kuw_patch1_7win:	sll	%o3, 6, %o3
+
+	/* No matter how much overhead this routine has in the worst
+	 * case scenario, it is several times better than taking the
+	 * traps with the old method of just doing flush_user_windows().
+	 */
+kill_user_windows:
+	ld	[%g6 + TI_UWINMASK], %o0	! get current umask
+	orcc	%g0, %o0, %g0			! if no bits set, we are done
+	be	3f				! nothing to do
+	 rd	%psr, %o5			! must clear interrupts
+	or	%o5, PSR_PIL, %o4		! or else that could change
+	wr	%o4, 0x0, %psr			! the uwinmask state
+	WRITE_PAUSE				! burn them cycles
+1:
+	ld	[%g6 + TI_UWINMASK], %o0	! get consistent state
+	orcc	%g0, %o0, %g0			! did an interrupt come in?
+	be	4f				! yep, we are done
+	 rd	%wim, %o3			! get current wim
+	srl	%o3, 1, %o4			! simulate a save
+kuw_patch1:
+	sll	%o3, 7, %o3			! compute next wim
+	or	%o4, %o3, %o3			! result
+	andncc	%o0, %o3, %o0			! clean this bit in umask
+	bne	kuw_patch1			! not done yet
+	 srl	%o3, 1, %o4			! begin another save simulation
+	wr	%o3, 0x0, %wim			! set the new wim
+	st	%g0, [%g6 + TI_UWINMASK]	! clear uwinmask
+4:
+	wr	%o5, 0x0, %psr			! re-enable interrupts
+	WRITE_PAUSE				! burn baby burn
+3:
+	retl					! return
+	 st	%g0, [%g6 + TI_W_SAVED]		! no windows saved
+
+	.align	4
+	.globl	restore_current
+restore_current:
+	LOAD_CURRENT(g6, o0)
+	retl
+	 nop
+
+#ifdef CONFIG_PCIC_PCI
+#include <asm/pcic.h>
+
+	.align	4
+	.globl	linux_trap_ipi15_pcic
+linux_trap_ipi15_pcic:
+	rd	%wim, %l3
+	SAVE_ALL
+
+	/*
+	 * First deactivate NMI
+	 * or we cannot drop ET, cannot get window spill traps.
+	 * The busy loop is necessary because the PIO error
+	 * sometimes does not go away quickly and we trap again.
+	 */
+	sethi	%hi(pcic_regs), %o1
+	ld	[%o1 + %lo(pcic_regs)], %o2
+
+	! Get pending status for printouts later.
+	ld	[%o2 + PCI_SYS_INT_PENDING], %o0
+
+	mov	PCI_SYS_INT_PENDING_CLEAR_ALL, %o1
+	stb	%o1, [%o2 + PCI_SYS_INT_PENDING_CLEAR]
+1:
+	ld	[%o2 + PCI_SYS_INT_PENDING], %o1
+	andcc	%o1, ((PCI_SYS_INT_PENDING_PIO|PCI_SYS_INT_PENDING_PCI)>>24), %g0
+	bne	1b
+	 nop
+
+	or	%l0, PSR_PIL, %l4
+	wr	%l4, 0x0, %psr
+	WRITE_PAUSE
+	wr	%l4, PSR_ET, %psr
+	WRITE_PAUSE
+
+	call	pcic_nmi
+	 add	%sp, STACKFRAME_SZ, %o1	! struct pt_regs *regs
+	RESTORE_ALL
+
+	.globl	pcic_nmi_trap_patch
+pcic_nmi_trap_patch:
+	sethi	%hi(linux_trap_ipi15_pcic), %l3
+	jmpl	%l3 + %lo(linux_trap_ipi15_pcic), %g0
+	 rd	%psr, %l0
+	.word	0
+
+#endif /* CONFIG_PCIC_PCI */
+
+	.globl	flushw_all
+flushw_all:
+	save	%sp, -0x40, %sp
+	save	%sp, -0x40, %sp
+	save	%sp, -0x40, %sp
+	save	%sp, -0x40, %sp
+	save	%sp, -0x40, %sp
+	save	%sp, -0x40, %sp
+	save	%sp, -0x40, %sp
+	restore
+	restore
+	restore
+	restore
+	restore
+	restore
+	ret
+	 restore
+
+#ifdef CONFIG_SMP
+ENTRY(hard_smp_processor_id)
+661:	rd		%tbr, %g1
+	srl		%g1, 12, %o0
+	and		%o0, 3, %o0
+	.section	.cpuid_patch, "ax"
+	/* Instruction location. */
+	.word		661b
+	/* SUN4D implementation. */
+	lda		[%g0] ASI_M_VIKING_TMP1, %o0
+	nop
+	nop
+	/* LEON implementation. */
+	rd		%asr17, %o0
+	srl		%o0, 0x1c, %o0
+	nop
+	.previous
+	retl
+	 nop
+ENDPROC(hard_smp_processor_id)
+#endif
+
+/* End of entry.S */