Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 705 insertions, 0 deletions

diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
new file mode 100644
index 000000000..87e08ad38
--- /dev/null
+++ b/arch/xtensa/Kconfig
@@ -0,0 +1,705 @@
+# SPDX-License-Identifier: GPL-2.0
+config XTENSA
+	def_bool y
+	select ARCH_32BIT_OFF_T
+	select ARCH_HAS_BINFMT_FLAT if !MMU
+	select ARCH_HAS_DMA_PREP_COHERENT if MMU
+	select ARCH_HAS_SYNC_DMA_FOR_CPU if MMU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE if MMU
+	select ARCH_HAS_DMA_SET_UNCACHED if MMU
+	select ARCH_USE_QUEUED_RWLOCKS
+	select ARCH_USE_QUEUED_SPINLOCKS
+	select ARCH_WANT_FRAME_POINTERS
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select BUILDTIME_TABLE_SORT
+	select CLONE_BACKWARDS
+	select COMMON_CLK
+	select DMA_REMAP if MMU
+	select GENERIC_ATOMIC64
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
+	select GENERIC_SCHED_CLOCK
+	select GENERIC_STRNCPY_FROM_USER if KASAN
+	select HAVE_ARCH_AUDITSYSCALL
+	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
+	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+	select HAVE_ARCH_SECCOMP_FILTER
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_CONTIGUOUS
+	select HAVE_EXIT_THREAD
+	select HAVE_FUNCTION_TRACER
+	select HAVE_FUTEX_CMPXCHG if !MMU && FUTEX
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS
+	select HAVE_IRQ_TIME_ACCOUNTING
+	select HAVE_OPROFILE
+	select HAVE_PCI
+	select HAVE_PERF_EVENTS
+	select HAVE_STACKPROTECTOR
+	select HAVE_SYSCALL_TRACEPOINTS
+	select IRQ_DOMAIN
+	select MODULES_USE_ELF_RELA
+	select PERF_USE_VMALLOC
+	select SET_FS
+	select VIRT_TO_BUS
+	help
+	  Xtensa processors are 32-bit RISC machines designed by Tensilica
+	  primarily for embedded systems.  These processors are both
+	  configurable and extensible.  The Linux port to the Xtensa
+	  architecture supports all processor configurations and extensions,
+	  with reasonable minimum requirements.  The Xtensa Linux project has
+	  a home page at <http://www.linux-xtensa.org/>.
+
+config GENERIC_HWEIGHT
+	def_bool y
+
+config ARCH_HAS_ILOG2_U32
+	def_bool n
+
+config ARCH_HAS_ILOG2_U64
+	def_bool n
+
+config NO_IOPORT_MAP
+	def_bool n
+
+config HZ
+	int
+	default 100
+
+config LOCKDEP_SUPPORT
+	def_bool y
+
+config STACKTRACE_SUPPORT
+	def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config MMU
+	def_bool n
+
+config HAVE_XTENSA_GPIO32
+	def_bool n
+
+config KASAN_SHADOW_OFFSET
+	hex
+	default 0x6e400000
+
+menu "Processor type and features"
+
+choice
+	prompt "Xtensa Processor Configuration"
+	default XTENSA_VARIANT_FSF
+
+config XTENSA_VARIANT_FSF
+	bool "fsf - default (not generic) configuration"
+	select MMU
+
+config XTENSA_VARIANT_DC232B
+	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
+	select MMU
+	select HAVE_XTENSA_GPIO32
+	help
+	  This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).
+
+config XTENSA_VARIANT_DC233C
+	bool "dc233c - Diamond 233L Standard Core Rev.C (LE)"
+	select MMU
+	select HAVE_XTENSA_GPIO32
+	help
+	  This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE).
+
+config XTENSA_VARIANT_CUSTOM
+	bool "Custom Xtensa processor configuration"
+	select HAVE_XTENSA_GPIO32
+	help
+	  Select this variant to use a custom Xtensa processor configuration.
+	  You will be prompted for a processor variant CORENAME.
+endchoice
+
+config XTENSA_VARIANT_CUSTOM_NAME
+	string "Xtensa Processor Custom Core Variant Name"
+	depends on XTENSA_VARIANT_CUSTOM
+	help
+	  Provide the name of a custom Xtensa processor variant.
+	  This CORENAME selects arch/xtensa/variant/CORENAME.
+	  Don't forget you have to select MMU if you have one.
+
+config XTENSA_VARIANT_NAME
+	string
+	default "dc232b"			if XTENSA_VARIANT_DC232B
+	default "dc233c"			if XTENSA_VARIANT_DC233C
+	default "fsf"				if XTENSA_VARIANT_FSF
+	default XTENSA_VARIANT_CUSTOM_NAME	if XTENSA_VARIANT_CUSTOM
+
+config XTENSA_VARIANT_MMU
+	bool "Core variant has a Full MMU (TLB, Pages, Protection, etc)"
+	depends on XTENSA_VARIANT_CUSTOM
+	default y
+	select MMU
+	help
+	  Build a Conventional Kernel with full MMU support,
+	  ie: it supports a TLB with auto-loading, page protection.
+
+config XTENSA_VARIANT_HAVE_PERF_EVENTS
+	bool "Core variant has Performance Monitor Module"
+	depends on XTENSA_VARIANT_CUSTOM
+	default n
+	help
+	  Enable if core variant has Performance Monitor Module with
+	  External Registers Interface.
+
+	  If unsure, say N.
+
+config XTENSA_FAKE_NMI
+	bool "Treat PMM IRQ as NMI"
+	depends on XTENSA_VARIANT_HAVE_PERF_EVENTS
+	default n
+	help
+	  If PMM IRQ is the only IRQ at EXCM level it is safe to
+	  treat it as NMI, which improves accuracy of profiling.
+
+	  If there are other interrupts at or above PMM IRQ priority level
+	  but not above the EXCM level, PMM IRQ still may be treated as NMI,
+	  but only if these IRQs are not used. There will be a build warning
+	  saying that this is not safe, and a bugcheck if one of these IRQs
+	  actually fire.
+
+	  If unsure, say N.
+
+config XTENSA_UNALIGNED_USER
+	bool "Unaligned memory access in user space"
+	help
+	  The Xtensa architecture currently does not handle unaligned
+	  memory accesses in hardware but through an exception handler.
+	  Per default, unaligned memory accesses are disabled in user space.
+
+	  Say Y here to enable unaligned memory access in user space.
+
+config HAVE_SMP
+	bool "System Supports SMP (MX)"
+	depends on XTENSA_VARIANT_CUSTOM
+	select XTENSA_MX
+	help
+	  This option is used to indicate that the system-on-a-chip (SOC)
+	  supports Multiprocessing. Multiprocessor support implemented above
+	  the CPU core definition and currently needs to be selected manually.
+
+	  Multiprocessor support is implemented with external cache and
+	  interrupt controllers.
+
+	  The MX interrupt distributer adds Interprocessor Interrupts
+	  and causes the IRQ numbers to be increased by 4 for devices
+	  like the open cores ethernet driver and the serial interface.
+
+	  You still have to select "Enable SMP" to enable SMP on this SOC.
+
+config SMP
+	bool "Enable Symmetric multi-processing support"
+	depends on HAVE_SMP
+	select GENERIC_SMP_IDLE_THREAD
+	help
+	  Enabled SMP Software; allows more than one CPU/CORE
+	  to be activated during startup.
+
+config NR_CPUS
+	depends on SMP
+	int "Maximum number of CPUs (2-32)"
+	range 2 32
+	default "4"
+
+config HOTPLUG_CPU
+	bool "Enable CPU hotplug support"
+	depends on SMP
+	help
+	  Say Y here to allow turning CPUs off and on. CPUs can be
+	  controlled through /sys/devices/system/cpu.
+
+	  Say N if you want to disable CPU hotplug.
+
+config FAST_SYSCALL_XTENSA
+	bool "Enable fast atomic syscalls"
+	default n
+	help
+	  fast_syscall_xtensa is a syscall that can make atomic operations
+	  on UP kernel when processor has no s32c1i support.
+
+	  This syscall is deprecated. It may have issues when called with
+	  invalid arguments. It is provided only for backwards compatibility.
+	  Only enable it if your userspace software requires it.
+
+	  If unsure, say N.
+
+config FAST_SYSCALL_SPILL_REGISTERS
+	bool "Enable spill registers syscall"
+	default n
+	help
+	  fast_syscall_spill_registers is a syscall that spills all active
+	  register windows of a calling userspace task onto its stack.
+
+	  This syscall is deprecated. It may have issues when called with
+	  invalid arguments. It is provided only for backwards compatibility.
+	  Only enable it if your userspace software requires it.
+
+	  If unsure, say N.
+
+config USER_ABI_CALL0
+	bool
+
+choice
+	prompt "Userspace ABI"
+	default USER_ABI_DEFAULT
+	help
+	  Select supported userspace ABI.
+
+	  If unsure, choose the default ABI.
+
+config USER_ABI_DEFAULT
+	bool "Default ABI only"
+	help
+	  Assume default userspace ABI. For XEA2 cores it is windowed ABI.
+	  call0 ABI binaries may be run on such kernel, but signal delivery
+	  will not work correctly for them.
+
+config USER_ABI_CALL0_ONLY
+	bool "Call0 ABI only"
+	select USER_ABI_CALL0
+	help
+	  Select this option to support only call0 ABI in userspace.
+	  Windowed ABI binaries will crash with a segfault caused by
+	  an illegal instruction exception on the first 'entry' opcode.
+
+	  Choose this option if you're planning to run only user code
+	  built with call0 ABI.
+
+config USER_ABI_CALL0_PROBE
+	bool "Support both windowed and call0 ABI by probing"
+	select USER_ABI_CALL0
+	help
+	  Select this option to support both windowed and call0 userspace
+	  ABIs. When enabled all processes are started with PS.WOE disabled
+	  and a fast user exception handler for an illegal instruction is
+	  used to turn on PS.WOE bit on the first 'entry' opcode executed by
+	  the userspace.
+
+	  This option should be enabled for the kernel that must support
+	  both call0 and windowed ABIs in userspace at the same time.
+
+	  Note that Xtensa ISA does not guarantee that entry opcode will
+	  raise an illegal instruction exception on cores with XEA2 when
+	  PS.WOE is disabled, check whether the target core supports it.
+
+endchoice
+
+endmenu
+
+config XTENSA_CALIBRATE_CCOUNT
+	def_bool n
+	help
+	  On some platforms (XT2000, for example), the CPU clock rate can
+	  vary.  The frequency can be determined, however, by measuring
+	  against a well known, fixed frequency, such as an UART oscillator.
+
+config SERIAL_CONSOLE
+	def_bool n
+
+config PLATFORM_HAVE_XIP
+	def_bool n
+
+menu "Platform options"
+
+choice
+	prompt "Xtensa System Type"
+	default XTENSA_PLATFORM_ISS
+
+config XTENSA_PLATFORM_ISS
+	bool "ISS"
+	select XTENSA_CALIBRATE_CCOUNT
+	select SERIAL_CONSOLE
+	help
+	  ISS is an acronym for Tensilica's Instruction Set Simulator.
+
+config XTENSA_PLATFORM_XT2000
+	bool "XT2000"
+	select HAVE_IDE
+	help
+	  XT2000 is the name of Tensilica's feature-rich emulation platform.
+	  This hardware is capable of running a full Linux distribution.
+
+config XTENSA_PLATFORM_XTFPGA
+	bool "XTFPGA"
+	select ETHOC if ETHERNET
+	select PLATFORM_WANT_DEFAULT_MEM if !MMU
+	select SERIAL_CONSOLE
+	select XTENSA_CALIBRATE_CCOUNT
+	select PLATFORM_HAVE_XIP
+	help
+	  XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
+	  This hardware is capable of running a full Linux distribution.
+
+endchoice
+
+config PLATFORM_NR_IRQS
+	int
+	default 3 if XTENSA_PLATFORM_XT2000
+	default 0
+
+config XTENSA_CPU_CLOCK
+	int "CPU clock rate [MHz]"
+	depends on !XTENSA_CALIBRATE_CCOUNT
+	default 16
+
+config GENERIC_CALIBRATE_DELAY
+	bool "Auto calibration of the BogoMIPS value"
+	help
+	  The BogoMIPS value can easily be derived from the CPU frequency.
+
+config CMDLINE_BOOL
+	bool "Default bootloader kernel arguments"
+
+config CMDLINE
+	string "Initial kernel command string"
+	depends on CMDLINE_BOOL
+	default "console=ttyS0,38400 root=/dev/ram"
+	help
+	  On some architectures (EBSA110 and CATS), there is currently no way
+	  for the boot loader to pass arguments to the kernel. For these
+	  architectures, you should supply some command-line options at build
+	  time by entering them here. As a minimum, you should specify the
+	  memory size and the root device (e.g., mem=64M root=/dev/nfs).
+
+config USE_OF
+	bool "Flattened Device Tree support"
+	select OF
+	select OF_EARLY_FLATTREE
+	help
+	  Include support for flattened device tree machine descriptions.
+
+config BUILTIN_DTB_SOURCE
+	string "DTB to build into the kernel image"
+	depends on OF
+
+config PARSE_BOOTPARAM
+	bool "Parse bootparam block"
+	default y
+	help
+	  Parse parameters passed to the kernel from the bootloader. It may
+	  be disabled if the kernel is known to run without the bootloader.
+
+	  If unsure, say Y.
+
+config BLK_DEV_SIMDISK
+	tristate "Host file-based simulated block device support"
+	default n
+	depends on XTENSA_PLATFORM_ISS && BLOCK
+	help
+	  Create block devices that map to files in the host file system.
+	  Device binding to host file may be changed at runtime via proc
+	  interface provided the device is not in use.
+
+config BLK_DEV_SIMDISK_COUNT
+	int "Number of host file-based simulated block devices"
+	range 1 10
+	depends on BLK_DEV_SIMDISK
+	default 2
+	help
+	  This is the default minimal number of created block devices.
+	  Kernel/module parameter 'simdisk_count' may be used to change this
+	  value at runtime. More file names (but no more than 10) may be
+	  specified as parameters, simdisk_count grows accordingly.
+
+config SIMDISK0_FILENAME
+	string "Host filename for the first simulated device"
+	depends on BLK_DEV_SIMDISK = y
+	default ""
+	help
+	  Attach a first simdisk to a host file. Conventionally, this file
+	  contains a root file system.
+
+config SIMDISK1_FILENAME
+	string "Host filename for the second simulated device"
+	depends on BLK_DEV_SIMDISK = y && BLK_DEV_SIMDISK_COUNT != 1
+	default ""
+	help
+	  Another simulated disk in a host file for a buildroot-independent
+	  storage.
+
+config XTFPGA_LCD
+	bool "Enable XTFPGA LCD driver"
+	depends on XTENSA_PLATFORM_XTFPGA
+	default n
+	help
+	  There's a 2x16 LCD on most of XTFPGA boards, kernel may output
+	  progress messages there during bootup/shutdown. It may be useful
+	  during board bringup.
+
+	  If unsure, say N.
+
+config XTFPGA_LCD_BASE_ADDR
+	hex "XTFPGA LCD base address"
+	depends on XTFPGA_LCD
+	default "0x0d0c0000"
+	help
+	  Base address of the LCD controller inside KIO region.
+	  Different boards from XTFPGA family have LCD controller at different
+	  addresses. Please consult prototyping user guide for your board for
+	  the correct address. Wrong address here may lead to hardware lockup.
+
+config XTFPGA_LCD_8BIT_ACCESS
+	bool "Use 8-bit access to XTFPGA LCD"
+	depends on XTFPGA_LCD
+	default n
+	help
+	  LCD may be connected with 4- or 8-bit interface, 8-bit access may
+	  only be used with 8-bit interface. Please consult prototyping user
+	  guide for your board for the correct interface width.
+
+comment "Kernel memory layout"
+
+config INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	bool "Initialize Xtensa MMU inside the Linux kernel code"
+	depends on !XTENSA_VARIANT_FSF && !XTENSA_VARIANT_DC232B
+	default y if XTENSA_VARIANT_DC233C || XTENSA_VARIANT_CUSTOM
+	help
+	  Earlier version initialized the MMU in the exception vector
+	  before jumping to _startup in head.S and had an advantage that
+	  it was possible to place a software breakpoint at 'reset' and
+	  then enter your normal kernel breakpoints once the MMU was mapped
+	  to the kernel mappings (0XC0000000).
+
+	  This unfortunately won't work for U-Boot and likely also wont
+	  work for using KEXEC to have a hot kernel ready for doing a
+	  KDUMP.
+
+	  So now the MMU is initialized in head.S but it's necessary to
+	  use hardware breakpoints (gdb 'hbreak' cmd) to break at _startup.
+	  xt-gdb can't place a Software Breakpoint in the  0XD region prior
+	  to mapping the MMU and after mapping even if the area of low memory
+	  was mapped gdb wouldn't remove the breakpoint on hitting it as the
+	  PC wouldn't match. Since Hardware Breakpoints are recommended for
+	  Linux configurations it seems reasonable to just assume they exist
+	  and leave this older mechanism for unfortunate souls that choose
+	  not to follow Tensilica's recommendation.
+
+	  Selecting this will cause U-Boot to set the KERNEL Load and Entry
+	  address at 0x00003000 instead of the mapped std of 0xD0003000.
+
+	  If in doubt, say Y.
+
+config XIP_KERNEL
+	bool "Kernel Execute-In-Place from ROM"
+	depends on PLATFORM_HAVE_XIP
+	help
+	  Execute-In-Place allows the kernel to run from non-volatile storage
+	  directly addressable by the CPU, such as NOR flash. This saves RAM
+	  space since the text section of the kernel is not loaded from flash
+	  to RAM. Read-write sections, such as the data section and stack,
+	  are still copied to RAM. The XIP kernel is not compressed since
+	  it has to run directly from flash, so it will take more space to
+	  store it. The flash address used to link the kernel object files,
+	  and for storing it, is configuration dependent. Therefore, if you
+	  say Y here, you must know the proper physical address where to
+	  store the kernel image depending on your own flash memory usage.
+
+	  Also note that the make target becomes "make xipImage" rather than
+	  "make Image" or "make uImage". The final kernel binary to put in
+	  ROM memory will be arch/xtensa/boot/xipImage.
+
+	  If unsure, say N.
+
+config MEMMAP_CACHEATTR
+	hex "Cache attributes for the memory address space"
+	depends on !MMU
+	default 0x22222222
+	help
+	  These cache attributes are set up for noMMU systems. Each hex digit
+	  specifies cache attributes for the corresponding 512MB memory
+	  region: bits 0..3 -- for addresses 0x00000000..0x1fffffff,
+	  bits 4..7 -- for addresses 0x20000000..0x3fffffff, and so on.
+
+	  Cache attribute values are specific for the MMU type.
+	  For region protection MMUs:
+	    1: WT cached,
+	    2: cache bypass,
+	    4: WB cached,
+	    f: illegal.
+	  For full MMU:
+	    bit 0: executable,
+	    bit 1: writable,
+	    bits 2..3:
+	      0: cache bypass,
+	      1: WB cache,
+	      2: WT cache,
+	      3: special (c and e are illegal, f is reserved).
+	  For MPU:
+	    0: illegal,
+	    1: WB cache,
+	    2: WB, no-write-allocate cache,
+	    3: WT cache,
+	    4: cache bypass.
+
+config KSEG_PADDR
+	hex "Physical address of the KSEG mapping"
+	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX && MMU
+	default 0x00000000
+	help
+	  This is the physical address where KSEG is mapped. Please refer to
+	  the chosen KSEG layout help for the required address alignment.
+	  Unpacked kernel image (including vectors) must be located completely
+	  within KSEG.
+	  Physical memory below this address is not available to linux.
+
+	  If unsure, leave the default value here.
+
+config KERNEL_VIRTUAL_ADDRESS
+	hex "Kernel virtual address"
+	depends on MMU && XIP_KERNEL
+	default 0xd0003000
+	help
+	  This is the virtual address where the XIP kernel is mapped.
+	  XIP kernel may be mapped into KSEG or KIO region, virtual address
+	  provided here must match kernel load address provided in
+	  KERNEL_LOAD_ADDRESS.
+
+config KERNEL_LOAD_ADDRESS
+	hex "Kernel load address"
+	default 0x60003000 if !MMU
+	default 0x00003000 if MMU && INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	default 0xd0003000 if MMU && !INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	help
+	  This is the address where the kernel is loaded.
+	  It is virtual address for MMUv2 configurations and physical address
+	  for all other configurations.
+
+	  If unsure, leave the default value here.
+
+choice
+	prompt "Relocatable vectors location"
+	default XTENSA_VECTORS_IN_TEXT
+	help
+	  Choose whether relocatable vectors are merged into the kernel .text
+	  or placed separately at runtime. This option does not affect
+	  configurations without VECBASE register where vectors are always
+	  placed at their hardware-defined locations.
+
+config XTENSA_VECTORS_IN_TEXT
+	bool "Merge relocatable vectors into kernel text"
+	depends on !MTD_XIP
+	help
+	  This option puts relocatable vectors into the kernel .text section
+	  with proper alignment.
+	  This is a safe choice for most configurations.
+
+config XTENSA_VECTORS_SEPARATE
+	bool "Put relocatable vectors at fixed address"
+	help
+	  This option puts relocatable vectors at specific virtual address.
+	  Vectors are merged with the .init data in the kernel image and
+	  are copied into their designated location during kernel startup.
+	  Use it to put vectors into IRAM or out of FLASH on kernels with
+	  XIP-aware MTD support.
+
+endchoice
+
+config VECTORS_ADDR
+	hex "Kernel vectors virtual address"
+	default 0x00000000
+	depends on XTENSA_VECTORS_SEPARATE
+	help
+	  This is the virtual address of the (relocatable) vectors base.
+	  It must be within KSEG if MMU is used.
+
+config XIP_DATA_ADDR
+	hex "XIP kernel data virtual address"
+	depends on XIP_KERNEL
+	default 0x00000000
+	help
+	  This is the virtual address where XIP kernel data is copied.
+	  It must be within KSEG if MMU is used.
+
+config PLATFORM_WANT_DEFAULT_MEM
+	def_bool n
+
+config DEFAULT_MEM_START
+	hex
+	prompt "PAGE_OFFSET/PHYS_OFFSET" if !MMU && PLATFORM_WANT_DEFAULT_MEM
+	default 0x60000000 if PLATFORM_WANT_DEFAULT_MEM
+	default 0x00000000
+	help
+	  This is the base address used for both PAGE_OFFSET and PHYS_OFFSET
+	  in noMMU configurations.
+
+	  If unsure, leave the default value here.
+
+choice
+	prompt "KSEG layout"
+	depends on MMU
+	default XTENSA_KSEG_MMU_V2
+
+config XTENSA_KSEG_MMU_V2
+	bool "MMUv2: 128MB cached + 128MB uncached"
+	help
+	  MMUv2 compatible kernel memory map: TLB way 5 maps 128MB starting
+	  at KSEG_PADDR to 0xd0000000 with cache and to 0xd8000000
+	  without cache.
+	  KSEG_PADDR must be aligned to 128MB.
+
+config XTENSA_KSEG_256M
+	bool "256MB cached + 256MB uncached"
+	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	help
+	  TLB way 6 maps 256MB starting at KSEG_PADDR to 0xb0000000
+	  with cache and to 0xc0000000 without cache.
+	  KSEG_PADDR must be aligned to 256MB.
+
+config XTENSA_KSEG_512M
+	bool "512MB cached + 512MB uncached"
+	depends on INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
+	help
+	  TLB way 6 maps 512MB starting at KSEG_PADDR to 0xa0000000
+	  with cache and to 0xc0000000 without cache.
+	  KSEG_PADDR must be aligned to 256MB.
+
+endchoice
+
+config HIGHMEM
+	bool "High Memory Support"
+	depends on MMU
+	help
+	  Linux can use the full amount of RAM in the system by
+	  default. However, the default MMUv2 setup only maps the
+	  lowermost 128 MB of memory linearly to the areas starting
+	  at 0xd0000000 (cached) and 0xd8000000 (uncached).
+	  When there are more than 128 MB memory in the system not
+	  all of it can be "permanently mapped" by the kernel.
+	  The physical memory that's not permanently mapped is called
+	  "high memory".
+
+	  If you are compiling a kernel which will never run on a
+	  machine with more than 128 MB total physical RAM, answer
+	  N here.
+
+	  If unsure, say Y.
+
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
+endmenu
+
+menu "Power management options"
+
+source "kernel/power/Kconfig"
+
+endmenu