Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 216 insertions, 0 deletions

diff --git a/block/blk-pm.c b/block/blk-pm.c
new file mode 100644
index 000000000..2dad62cc1
--- /dev/null
+++ b/block/blk-pm.c
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/blk-mq.h>
+#include <linux/blk-pm.h>
+#include <linux/blkdev.h>
+#include <linux/pm_runtime.h>
+#include "blk-mq.h"
+#include "blk-mq-tag.h"
+
+/**
+ * blk_pm_runtime_init - Block layer runtime PM initialization routine
+ * @q: the queue of the device
+ * @dev: the device the queue belongs to
+ *
+ * Description:
+ *    Initialize runtime-PM-related fields for @q and start auto suspend for
+ *    @dev. Drivers that want to take advantage of request-based runtime PM
+ *    should call this function after @dev has been initialized, and its
+ *    request queue @q has been allocated, and runtime PM for it can not happen
+ *    yet(either due to disabled/forbidden or its usage_count > 0). In most
+ *    cases, driver should call this function before any I/O has taken place.
+ *
+ *    This function takes care of setting up using auto suspend for the device,
+ *    the autosuspend delay is set to -1 to make runtime suspend impossible
+ *    until an updated value is either set by user or by driver. Drivers do
+ *    not need to touch other autosuspend settings.
+ *
+ *    The block layer runtime PM is request based, so only works for drivers
+ *    that use request as their IO unit instead of those directly use bio's.
+ */
+void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
+{
+	q->dev = dev;
+	q->rpm_status = RPM_ACTIVE;
+	pm_runtime_set_autosuspend_delay(q->dev, -1);
+	pm_runtime_use_autosuspend(q->dev);
+}
+EXPORT_SYMBOL(blk_pm_runtime_init);
+
+/**
+ * blk_pre_runtime_suspend - Pre runtime suspend check
+ * @q: the queue of the device
+ *
+ * Description:
+ *    This function will check if runtime suspend is allowed for the device
+ *    by examining if there are any requests pending in the queue. If there
+ *    are requests pending, the device can not be runtime suspended; otherwise,
+ *    the queue's status will be updated to SUSPENDING and the driver can
+ *    proceed to suspend the device.
+ *
+ *    For the not allowed case, we mark last busy for the device so that
+ *    runtime PM core will try to autosuspend it some time later.
+ *
+ *    This function should be called near the start of the device's
+ *    runtime_suspend callback.
+ *
+ * Return:
+ *    0		- OK to runtime suspend the device
+ *    -EBUSY	- Device should not be runtime suspended
+ */
+int blk_pre_runtime_suspend(struct request_queue *q)
+{
+	int ret = 0;
+
+	if (!q->dev)
+		return ret;
+
+	WARN_ON_ONCE(q->rpm_status != RPM_ACTIVE);
+
+	spin_lock_irq(&q->queue_lock);
+	q->rpm_status = RPM_SUSPENDING;
+	spin_unlock_irq(&q->queue_lock);
+
+	/*
+	 * Increase the pm_only counter before checking whether any
+	 * non-PM blk_queue_enter() calls are in progress to avoid that any
+	 * new non-PM blk_queue_enter() calls succeed before the pm_only
+	 * counter is decreased again.
+	 */
+	blk_set_pm_only(q);
+	ret = -EBUSY;
+	/* Switch q_usage_counter from per-cpu to atomic mode. */
+	blk_freeze_queue_start(q);
+	/*
+	 * Wait until atomic mode has been reached. Since that
+	 * involves calling call_rcu(), it is guaranteed that later
+	 * blk_queue_enter() calls see the pm-only state. See also
+	 * http://lwn.net/Articles/573497/.
+	 */
+	percpu_ref_switch_to_atomic_sync(&q->q_usage_counter);
+	if (percpu_ref_is_zero(&q->q_usage_counter))
+		ret = 0;
+	/* Switch q_usage_counter back to per-cpu mode. */
+	blk_mq_unfreeze_queue(q);
+
+	if (ret < 0) {
+		spin_lock_irq(&q->queue_lock);
+		q->rpm_status = RPM_ACTIVE;
+		pm_runtime_mark_last_busy(q->dev);
+		spin_unlock_irq(&q->queue_lock);
+
+		blk_clear_pm_only(q);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL(blk_pre_runtime_suspend);
+
+/**
+ * blk_post_runtime_suspend - Post runtime suspend processing
+ * @q: the queue of the device
+ * @err: return value of the device's runtime_suspend function
+ *
+ * Description:
+ *    Update the queue's runtime status according to the return value of the
+ *    device's runtime suspend function and mark last busy for the device so
+ *    that PM core will try to auto suspend the device at a later time.
+ *
+ *    This function should be called near the end of the device's
+ *    runtime_suspend callback.
+ */
+void blk_post_runtime_suspend(struct request_queue *q, int err)
+{
+	if (!q->dev)
+		return;
+
+	spin_lock_irq(&q->queue_lock);
+	if (!err) {
+		q->rpm_status = RPM_SUSPENDED;
+	} else {
+		q->rpm_status = RPM_ACTIVE;
+		pm_runtime_mark_last_busy(q->dev);
+	}
+	spin_unlock_irq(&q->queue_lock);
+
+	if (err)
+		blk_clear_pm_only(q);
+}
+EXPORT_SYMBOL(blk_post_runtime_suspend);
+
+/**
+ * blk_pre_runtime_resume - Pre runtime resume processing
+ * @q: the queue of the device
+ *
+ * Description:
+ *    Update the queue's runtime status to RESUMING in preparation for the
+ *    runtime resume of the device.
+ *
+ *    This function should be called near the start of the device's
+ *    runtime_resume callback.
+ */
+void blk_pre_runtime_resume(struct request_queue *q)
+{
+	if (!q->dev)
+		return;
+
+	spin_lock_irq(&q->queue_lock);
+	q->rpm_status = RPM_RESUMING;
+	spin_unlock_irq(&q->queue_lock);
+}
+EXPORT_SYMBOL(blk_pre_runtime_resume);
+
+/**
+ * blk_post_runtime_resume - Post runtime resume processing
+ * @q: the queue of the device
+ *
+ * Description:
+ *    For historical reasons, this routine merely calls blk_set_runtime_active()
+ *    to do the real work of restarting the queue.  It does this regardless of
+ *    whether the device's runtime-resume succeeded; even if it failed the
+ *    driver or error handler will need to communicate with the device.
+ *
+ *    This function should be called near the end of the device's
+ *    runtime_resume callback.
+ */
+void blk_post_runtime_resume(struct request_queue *q)
+{
+	blk_set_runtime_active(q);
+}
+EXPORT_SYMBOL(blk_post_runtime_resume);
+
+/**
+ * blk_set_runtime_active - Force runtime status of the queue to be active
+ * @q: the queue of the device
+ *
+ * If the device is left runtime suspended during system suspend the resume
+ * hook typically resumes the device and corrects runtime status
+ * accordingly. However, that does not affect the queue runtime PM status
+ * which is still "suspended". This prevents processing requests from the
+ * queue.
+ *
+ * This function can be used in driver's resume hook to correct queue
+ * runtime PM status and re-enable peeking requests from the queue. It
+ * should be called before first request is added to the queue.
+ *
+ * This function is also called by blk_post_runtime_resume() for
+ * runtime resumes.  It does everything necessary to restart the queue.
+ */
+void blk_set_runtime_active(struct request_queue *q)
+{
+	int old_status;
+
+	if (!q->dev)
+		return;
+
+	spin_lock_irq(&q->queue_lock);
+	old_status = q->rpm_status;
+	q->rpm_status = RPM_ACTIVE;
+	pm_runtime_mark_last_busy(q->dev);
+	pm_request_autosuspend(q->dev);
+	spin_unlock_irq(&q->queue_lock);
+
+	if (old_status != RPM_ACTIVE)
+		blk_clear_pm_only(q);
+}
+EXPORT_SYMBOL(blk_set_runtime_active);