Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 261 insertions, 0 deletions

diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c
new file mode 100644
index 000000000..3ad46d26d
--- /dev/null
+++ b/drivers/ata/ahci_mvebu.c
@@ -0,0 +1,261 @@
+/*
+ * AHCI glue platform driver for Marvell EBU SOCs
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ * Marcin Wojtas <mw@semihalf.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/ahci_platform.h>
+#include <linux/kernel.h>
+#include <linux/mbus.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "ahci.h"
+
+#define DRV_NAME "ahci-mvebu"
+
+#define AHCI_VENDOR_SPECIFIC_0_ADDR  0xa0
+#define AHCI_VENDOR_SPECIFIC_0_DATA  0xa4
+
+#define AHCI_WINDOW_CTRL(win)	(0x60 + ((win) << 4))
+#define AHCI_WINDOW_BASE(win)	(0x64 + ((win) << 4))
+#define AHCI_WINDOW_SIZE(win)	(0x68 + ((win) << 4))
+
+struct ahci_mvebu_plat_data {
+	int (*plat_config)(struct ahci_host_priv *hpriv);
+	unsigned int flags;
+};
+
+static void ahci_mvebu_mbus_config(struct ahci_host_priv *hpriv,
+				   const struct mbus_dram_target_info *dram)
+{
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		writel(0, hpriv->mmio + AHCI_WINDOW_CTRL(i));
+		writel(0, hpriv->mmio + AHCI_WINDOW_BASE(i));
+		writel(0, hpriv->mmio + AHCI_WINDOW_SIZE(i));
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+
+		writel((cs->mbus_attr << 8) |
+		       (dram->mbus_dram_target_id << 4) | 1,
+		       hpriv->mmio + AHCI_WINDOW_CTRL(i));
+		writel(cs->base >> 16, hpriv->mmio + AHCI_WINDOW_BASE(i));
+		writel(((cs->size - 1) & 0xffff0000),
+		       hpriv->mmio + AHCI_WINDOW_SIZE(i));
+	}
+}
+
+static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv)
+{
+	/*
+	 * Enable the regret bit to allow the SATA unit to regret a
+	 * request that didn't receive an acknowlegde and avoid a
+	 * deadlock
+	 */
+	writel(0x4, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_ADDR);
+	writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA);
+}
+
+static int ahci_mvebu_armada_380_config(struct ahci_host_priv *hpriv)
+{
+	const struct mbus_dram_target_info *dram;
+	int rc = 0;
+
+	dram = mv_mbus_dram_info();
+	if (dram)
+		ahci_mvebu_mbus_config(hpriv, dram);
+	else
+		rc = -ENODEV;
+
+	ahci_mvebu_regret_option(hpriv);
+
+	return rc;
+}
+
+static int ahci_mvebu_armada_3700_config(struct ahci_host_priv *hpriv)
+{
+	u32 reg;
+
+	writel(0, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_ADDR);
+
+	reg = readl(hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA);
+	reg |= BIT(6);
+	writel(reg, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA);
+
+	return 0;
+}
+
+/**
+ * ahci_mvebu_stop_engine
+ *
+ * @ap:	Target ata port
+ *
+ * Errata Ref#226 - SATA Disk HOT swap issue when connected through
+ * Port Multiplier in FIS-based Switching mode.
+ *
+ * To avoid the issue, according to design, the bits[11:8, 0] of
+ * register PxFBS are cleared when Port Command and Status (0x18) bit[0]
+ * changes its value from 1 to 0, i.e. falling edge of Port
+ * Command and Status bit[0] sends PULSE that resets PxFBS
+ * bits[11:8; 0].
+ *
+ * This function is used to override function of "ahci_stop_engine"
+ * from libahci.c by adding the mvebu work around(WA) to save PxFBS
+ * value before the PxCMD ST write of 0, then restore PxFBS value.
+ *
+ * Return: 0 on success; Error code otherwise.
+ */
+static int ahci_mvebu_stop_engine(struct ata_port *ap)
+{
+	void __iomem *port_mmio = ahci_port_base(ap);
+	u32 tmp, port_fbs;
+
+	tmp = readl(port_mmio + PORT_CMD);
+
+	/* check if the HBA is idle */
+	if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
+		return 0;
+
+	/* save the port PxFBS register for later restore */
+	port_fbs = readl(port_mmio + PORT_FBS);
+
+	/* setting HBA to idle */
+	tmp &= ~PORT_CMD_START;
+	writel(tmp, port_mmio + PORT_CMD);
+
+	/*
+	 * bit #15 PxCMD signal doesn't clear PxFBS,
+	 * restore the PxFBS register right after clearing the PxCMD ST,
+	 * no need to wait for the PxCMD bit #15.
+	 */
+	writel(port_fbs, port_mmio + PORT_FBS);
+
+	/* wait for engine to stop. This could be as long as 500 msec */
+	tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
+				PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
+	if (tmp & PORT_CMD_LIST_ON)
+		return -EIO;
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ahci_mvebu_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	return ahci_platform_suspend_host(&pdev->dev);
+}
+
+static int ahci_mvebu_resume(struct platform_device *pdev)
+{
+	struct ata_host *host = platform_get_drvdata(pdev);
+	struct ahci_host_priv *hpriv = host->private_data;
+	const struct ahci_mvebu_plat_data *pdata = hpriv->plat_data;
+
+	pdata->plat_config(hpriv);
+
+	return ahci_platform_resume_host(&pdev->dev);
+}
+#else
+#define ahci_mvebu_suspend NULL
+#define ahci_mvebu_resume NULL
+#endif
+
+static const struct ata_port_info ahci_mvebu_port_info = {
+	.flags	   = AHCI_FLAG_COMMON,
+	.pio_mask  = ATA_PIO4,
+	.udma_mask = ATA_UDMA6,
+	.port_ops  = &ahci_platform_ops,
+};
+
+static struct scsi_host_template ahci_platform_sht = {
+	AHCI_SHT(DRV_NAME),
+};
+
+static int ahci_mvebu_probe(struct platform_device *pdev)
+{
+	const struct ahci_mvebu_plat_data *pdata;
+	struct ahci_host_priv *hpriv;
+	int rc;
+
+	pdata = of_device_get_match_data(&pdev->dev);
+	if (!pdata)
+		return -EINVAL;
+
+	hpriv = ahci_platform_get_resources(pdev, 0);
+	if (IS_ERR(hpriv))
+		return PTR_ERR(hpriv);
+
+	hpriv->flags |= pdata->flags;
+	hpriv->plat_data = (void *)pdata;
+
+	rc = ahci_platform_enable_resources(hpriv);
+	if (rc)
+		return rc;
+
+	hpriv->stop_engine = ahci_mvebu_stop_engine;
+
+	rc = pdata->plat_config(hpriv);
+	if (rc)
+		goto disable_resources;
+
+	rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info,
+				     &ahci_platform_sht);
+	if (rc)
+		goto disable_resources;
+
+	return 0;
+
+disable_resources:
+	ahci_platform_disable_resources(hpriv);
+	return rc;
+}
+
+static const struct ahci_mvebu_plat_data ahci_mvebu_armada_380_plat_data = {
+	.plat_config = ahci_mvebu_armada_380_config,
+};
+
+static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = {
+	.plat_config = ahci_mvebu_armada_3700_config,
+	.flags = AHCI_HFLAG_SUSPEND_PHYS | AHCI_HFLAG_IGN_NOTSUPP_POWER_ON,
+};
+
+static const struct of_device_id ahci_mvebu_of_match[] = {
+	{
+		.compatible = "marvell,armada-380-ahci",
+		.data = &ahci_mvebu_armada_380_plat_data,
+	},
+	{
+		.compatible = "marvell,armada-3700-ahci",
+		.data = &ahci_mvebu_armada_3700_plat_data,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match);
+
+static struct platform_driver ahci_mvebu_driver = {
+	.probe = ahci_mvebu_probe,
+	.remove = ata_platform_remove_one,
+	.suspend = ahci_mvebu_suspend,
+	.resume = ahci_mvebu_resume,
+	.driver = {
+		.name = DRV_NAME,
+		.of_match_table = ahci_mvebu_of_match,
+	},
+};
+module_platform_driver(ahci_mvebu_driver);
+
+MODULE_DESCRIPTION("Marvell EBU AHCI SATA driver");
+MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>, Marcin Wojtas <mw@semihalf.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ahci_mvebu");