Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 245 insertions, 0 deletions

diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
new file mode 100644
index 000000000..0c262c2ae
--- /dev/null
+++ b/drivers/bus/Kconfig
@@ -0,0 +1,245 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Bus Devices
+#
+
+menu "Bus devices"
+
+config ARM_CCI
+	bool
+
+config ARM_CCI400_COMMON
+	bool
+	select ARM_CCI
+
+config ARM_CCI400_PORT_CTRL
+	bool
+	depends on ARM && OF && CPU_V7
+	select ARM_CCI400_COMMON
+	help
+	  Low level power management driver for CCI400 cache coherent
+	  interconnect for ARM platforms.
+
+config ARM_INTEGRATOR_LM
+	bool "ARM Integrator Logic Module bus"
+	depends on HAS_IOMEM
+	depends on ARCH_INTEGRATOR || COMPILE_TEST
+	default ARCH_INTEGRATOR
+	help
+	  Say y here to enable support for the ARM Logic Module bus
+	  found on the ARM Integrator AP (Application Platform)
+
+config BRCMSTB_GISB_ARB
+	bool "Broadcom STB GISB bus arbiter"
+	depends on ARM || ARM64 || MIPS
+	default ARCH_BRCMSTB || BMIPS_GENERIC
+	help
+	  Driver for the Broadcom Set Top Box System-on-a-chip internal bus
+	  arbiter. This driver provides timeout and target abort error handling
+	  and internal bus master decoding.
+
+config BT1_APB
+	bool "Baikal-T1 APB-bus driver"
+	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  Baikal-T1 AXI-APB bridge is used to access the SoC subsystem CSRs.
+	  IO requests are routed to this bus by means of the DW AMBA 3 AXI
+	  Interconnect. In case of any APB protocol collisions, slave device
+	  not responding on timeout an IRQ is raised with an erroneous address
+	  reported to the APB terminator (APB Errors Handler Block). This
+	  driver provides the interrupt handler to detect the erroneous
+	  address, prints an error message about the address fault, updates an
+	  errors counter. The counter and the APB-bus operations timeout can be
+	  accessed via corresponding sysfs nodes.
+
+config BT1_AXI
+	bool "Baikal-T1 AXI-bus driver"
+	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
+	select MFD_SYSCON
+	help
+	  AXI3-bus is the main communication bus connecting all high-speed
+	  peripheral IP-cores with RAM controller and with MIPS P5600 cores on
+	  Baikal-T1 SoC. Traffic arbitration is done by means of DW AMBA 3 AXI
+	  Interconnect (so called AXI Main Interconnect) routing IO requests
+	  from one SoC block to another. This driver provides a way to detect
+	  any bus protocol errors and device not responding situations by
+	  means of an embedded on top of the interconnect errors handler
+	  block (EHB). AXI Interconnect QoS arbitration tuning is currently
+	  unsupported.
+
+config MOXTET
+	tristate "CZ.NIC Turris Mox module configuration bus"
+	depends on SPI_MASTER && OF
+	help
+	  Say yes here to add support for the module configuration bus found
+	  on CZ.NIC's Turris Mox. This is needed for the ability to discover
+	  the order in which the modules are connected and to get/set some of
+	  their settings. For example the GPIOs on Mox SFP module are
+	  configured through this bus.
+
+config HISILICON_LPC
+	bool "Support for ISA I/O space on HiSilicon Hip06/7"
+	depends on (ARM64 && ARCH_HISI) || (COMPILE_TEST && !ALPHA && !HEXAGON && !PARISC && !C6X)
+	depends on HAS_IOMEM
+	select INDIRECT_PIO if ARM64
+	help
+	  Driver to enable I/O access to devices attached to the Low Pin
+	  Count bus on the HiSilicon Hip06/7 SoC.
+
+config IMX_WEIM
+	bool "Freescale EIM DRIVER"
+	depends on ARCH_MXC
+	help
+	  Driver for i.MX WEIM controller.
+	  The WEIM(Wireless External Interface Module) works like a bus.
+	  You can attach many different devices on it, such as NOR, onenand.
+
+config MIPS_CDMM
+	bool "MIPS Common Device Memory Map (CDMM) Driver"
+	depends on CPU_MIPSR2 || CPU_MIPSR5
+	help
+	  Driver needed for the MIPS Common Device Memory Map bus in MIPS
+	  cores. This bus is for per-CPU tightly coupled devices such as the
+	  Fast Debug Channel (FDC).
+
+	  For this to work, either your bootloader needs to enable the CDMM
+	  region at an unused physical address on the boot CPU, or else your
+	  platform code needs to implement mips_cdmm_phys_base() (see
+	  asm/cdmm.h).
+
+config MVEBU_MBUS
+	bool
+	depends on PLAT_ORION
+	help
+	  Driver needed for the MBus configuration on Marvell EBU SoCs
+	  (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
+
+config OMAP_INTERCONNECT
+	tristate "OMAP INTERCONNECT DRIVER"
+	depends on ARCH_OMAP2PLUS
+
+	help
+	  Driver to enable OMAP interconnect error handling driver.
+
+config OMAP_OCP2SCP
+	tristate "OMAP OCP2SCP DRIVER"
+	depends on ARCH_OMAP2PLUS
+	help
+	  Driver to enable ocp2scp module which transforms ocp interface
+	  protocol to scp protocol. In OMAP4, USB PHY is connected via
+	  OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
+	  OCP2SCP.
+
+config QCOM_EBI2
+	bool "Qualcomm External Bus Interface 2 (EBI2)"
+	depends on HAS_IOMEM
+	depends on ARCH_QCOM || COMPILE_TEST
+	default ARCH_QCOM
+	help
+	  Say y here to enable support for the Qualcomm External Bus
+	  Interface 2, which can be used to connect things like NAND Flash,
+	  SRAM, ethernet adapters, FPGAs and LCD displays.
+
+config SIMPLE_PM_BUS
+	tristate "Simple Power-Managed Bus Driver"
+	depends on OF && PM
+	help
+	  Driver for transparent busses that don't need a real driver, but
+	  where the bus controller is part of a PM domain, or under the control
+	  of a functional clock, and thus relies on runtime PM for managing
+	  this PM domain and/or clock.
+	  An example of such a bus controller is the Renesas Bus State
+	  Controller (BSC, sometimes called "LBSC within Bus Bridge", or
+	  "External Bus Interface") as found on several Renesas ARM SoCs.
+
+config SUN50I_DE2_BUS
+	bool "Allwinner A64 DE2 Bus Driver"
+	  default ARM64
+	  depends on ARCH_SUNXI
+	  select SUNXI_SRAM
+	  help
+	  Say y here to enable support for Allwinner A64 DE2 bus driver. It's
+	  mostly transparent, but a SRAM region needs to be claimed in the SRAM
+	  controller to make the all blocks in the DE2 part accessible.
+
+config SUNXI_RSB
+	tristate "Allwinner sunXi Reduced Serial Bus Driver"
+	  default MACH_SUN8I || MACH_SUN9I || ARM64
+	  depends on ARCH_SUNXI
+	  select REGMAP
+	  help
+	  Say y here to enable support for Allwinner's Reduced Serial Bus
+	  (RSB) support. This controller is responsible for communicating
+	  with various RSB based devices, such as AXP223, AXP8XX PMICs,
+	  and AC100/AC200 ICs.
+
+config TEGRA_ACONNECT
+	tristate "Tegra ACONNECT Bus Driver"
+	depends on ARCH_TEGRA_210_SOC
+	depends on OF && PM
+	help
+	  Driver for the Tegra ACONNECT bus which is used to interface with
+	  the devices inside the Audio Processing Engine (APE) for Tegra210.
+
+config TEGRA_GMI
+	tristate "Tegra Generic Memory Interface bus driver"
+	depends on ARCH_TEGRA
+	help
+	  Driver for the Tegra Generic Memory Interface bus which can be used
+	  to attach devices such as NOR, UART, FPGA and more.
+
+config  TI_PWMSS
+	bool
+	default y if (ARCH_OMAP2PLUS) && (PWM_TIECAP || PWM_TIEHRPWM || TI_EQEP)
+	help
+	  PWM Subsystem driver support for AM33xx SOC.
+
+	  PWM submodules require PWM config space access from submodule
+	  drivers and require common parent driver support.
+
+config TI_SYSC
+	bool "TI sysc interconnect target module driver"
+	depends on ARCH_OMAP2PLUS
+	help
+	  Generic driver for Texas Instruments interconnect target module
+	  found on many TI SoCs.
+
+config TS_NBUS
+	tristate "Technologic Systems NBUS Driver"
+	depends on SOC_IMX28
+	depends on OF_GPIO && PWM
+	help
+	  Driver for the Technologic Systems NBUS which is used to interface
+	  with the peripherals in the FPGA of the TS-4600 SoM.
+
+config UNIPHIER_SYSTEM_BUS
+	tristate "UniPhier System Bus driver"
+	depends on ARCH_UNIPHIER && OF
+	default y
+	help
+	  Support for UniPhier System Bus, a simple external bus.  This is
+	  needed to use on-board devices connected to UniPhier SoCs.
+
+config VEXPRESS_CONFIG
+	tristate "Versatile Express configuration bus"
+	default y if ARCH_VEXPRESS
+	depends on ARM || ARM64
+	depends on OF
+	select REGMAP
+	help
+	  Platform configuration infrastructure for the ARM Ltd.
+	  Versatile Express.
+
+config DA8XX_MSTPRI
+	bool "TI da8xx master peripheral priority driver"
+	depends on ARCH_DAVINCI_DA8XX
+	help
+	  Driver for Texas Instruments da8xx master peripheral priority
+	  configuration. Allows to adjust the priorities of all master
+	  peripherals.
+
+source "drivers/bus/fsl-mc/Kconfig"
+source "drivers/bus/mhi/Kconfig"
+
+endmenu