Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 742 insertions, 0 deletions

diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c
new file mode 100644
index 000000000..bc3a18daf
--- /dev/null
+++ b/drivers/char/ipmi/ipmi_poweroff.c
@@ -0,0 +1,742 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ipmi_poweroff.c
+ *
+ * MontaVista IPMI Poweroff extension to sys_reboot
+ *
+ * Author: MontaVista Software, Inc.
+ *         Steven Dake <sdake@mvista.com>
+ *         Corey Minyard <cminyard@mvista.com>
+ *         source@mvista.com
+ *
+ * Copyright 2002,2004 MontaVista Software Inc.
+ */
+
+#define pr_fmt(fmt) "IPMI poweroff: " fmt
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/proc_fs.h>
+#include <linux/string.h>
+#include <linux/completion.h>
+#include <linux/pm.h>
+#include <linux/kdev_t.h>
+#include <linux/ipmi.h>
+#include <linux/ipmi_smi.h>
+
+static void ipmi_po_smi_gone(int if_num);
+static void ipmi_po_new_smi(int if_num, struct device *device);
+
+/* Definitions for controlling power off (if the system supports it).  It
+ * conveniently matches the IPMI chassis control values. */
+#define IPMI_CHASSIS_POWER_DOWN		0	/* power down, the default. */
+#define IPMI_CHASSIS_POWER_CYCLE	0x02	/* power cycle */
+
+/* the IPMI data command */
+static int poweroff_powercycle;
+
+/* Which interface to use, -1 means the first we see. */
+static int ifnum_to_use = -1;
+
+/* Our local state. */
+static int ready;
+static struct ipmi_user *ipmi_user;
+static int ipmi_ifnum;
+static void (*specific_poweroff_func)(struct ipmi_user *user);
+
+/* Holds the old poweroff function so we can restore it on removal. */
+static void (*old_poweroff_func)(void);
+
+static int set_param_ifnum(const char *val, const struct kernel_param *kp)
+{
+	int rv = param_set_int(val, kp);
+	if (rv)
+		return rv;
+	if ((ifnum_to_use < 0) || (ifnum_to_use == ipmi_ifnum))
+		return 0;
+
+	ipmi_po_smi_gone(ipmi_ifnum);
+	ipmi_po_new_smi(ifnum_to_use, NULL);
+	return 0;
+}
+
+module_param_call(ifnum_to_use, set_param_ifnum, param_get_int,
+		  &ifnum_to_use, 0644);
+MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog "
+		 "timer.  Setting to -1 defaults to the first registered "
+		 "interface");
+
+/* parameter definition to allow user to flag power cycle */
+module_param(poweroff_powercycle, int, 0644);
+MODULE_PARM_DESC(poweroff_powercycle,
+		 " Set to non-zero to enable power cycle instead of power"
+		 " down. Power cycle is contingent on hardware support,"
+		 " otherwise it defaults back to power down.");
+
+/* Stuff from the get device id command. */
+static unsigned int mfg_id;
+static unsigned int prod_id;
+static unsigned char capabilities;
+static unsigned char ipmi_version;
+
+/*
+ * We use our own messages for this operation, we don't let the system
+ * allocate them, since we may be in a panic situation.  The whole
+ * thing is single-threaded, anyway, so multiple messages are not
+ * required.
+ */
+static atomic_t dummy_count = ATOMIC_INIT(0);
+static void dummy_smi_free(struct ipmi_smi_msg *msg)
+{
+	atomic_dec(&dummy_count);
+}
+static void dummy_recv_free(struct ipmi_recv_msg *msg)
+{
+	atomic_dec(&dummy_count);
+}
+static struct ipmi_smi_msg halt_smi_msg = {
+	.done = dummy_smi_free
+};
+static struct ipmi_recv_msg halt_recv_msg = {
+	.done = dummy_recv_free
+};
+
+
+/*
+ * Code to send a message and wait for the response.
+ */
+
+static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data)
+{
+	struct completion *comp = recv_msg->user_msg_data;
+
+	if (comp)
+		complete(comp);
+}
+
+static const struct ipmi_user_hndl ipmi_poweroff_handler = {
+	.ipmi_recv_hndl = receive_handler
+};
+
+
+static int ipmi_request_wait_for_response(struct ipmi_user       *user,
+					  struct ipmi_addr       *addr,
+					  struct kernel_ipmi_msg *send_msg)
+{
+	int               rv;
+	struct completion comp;
+
+	init_completion(&comp);
+
+	rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &comp,
+				      &halt_smi_msg, &halt_recv_msg, 0);
+	if (rv)
+		return rv;
+
+	wait_for_completion(&comp);
+
+	return halt_recv_msg.msg.data[0];
+}
+
+/* Wait for message to complete, spinning. */
+static int ipmi_request_in_rc_mode(struct ipmi_user       *user,
+				   struct ipmi_addr       *addr,
+				   struct kernel_ipmi_msg *send_msg)
+{
+	int rv;
+
+	atomic_set(&dummy_count, 2);
+	rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL,
+				      &halt_smi_msg, &halt_recv_msg, 0);
+	if (rv) {
+		atomic_set(&dummy_count, 0);
+		return rv;
+	}
+
+	/*
+	 * Spin until our message is done.
+	 */
+	while (atomic_read(&dummy_count) > 0) {
+		ipmi_poll_interface(user);
+		cpu_relax();
+	}
+
+	return halt_recv_msg.msg.data[0];
+}
+
+/*
+ * ATCA Support
+ */
+
+#define IPMI_NETFN_ATCA			0x2c
+#define IPMI_ATCA_SET_POWER_CMD		0x11
+#define IPMI_ATCA_GET_ADDR_INFO_CMD	0x01
+#define IPMI_PICMG_ID			0
+
+#define IPMI_NETFN_OEM				0x2e
+#define IPMI_ATCA_PPS_GRACEFUL_RESTART		0x11
+#define IPMI_ATCA_PPS_IANA			"\x00\x40\x0A"
+#define IPMI_MOTOROLA_MANUFACTURER_ID		0x0000A1
+#define IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID	0x0051
+
+static void (*atca_oem_poweroff_hook)(struct ipmi_user *user);
+
+static void pps_poweroff_atca(struct ipmi_user *user)
+{
+	struct ipmi_system_interface_addr smi_addr;
+	struct kernel_ipmi_msg            send_msg;
+	int                               rv;
+	/*
+	 * Configure IPMI address for local access
+	 */
+	smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+	smi_addr.channel = IPMI_BMC_CHANNEL;
+	smi_addr.lun = 0;
+
+	pr_info("PPS powerdown hook used\n");
+
+	send_msg.netfn = IPMI_NETFN_OEM;
+	send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART;
+	send_msg.data = IPMI_ATCA_PPS_IANA;
+	send_msg.data_len = 3;
+	rv = ipmi_request_in_rc_mode(user,
+				     (struct ipmi_addr *) &smi_addr,
+				     &send_msg);
+	if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE)
+		pr_err("Unable to send ATCA, IPMI error 0x%x\n", rv);
+
+	return;
+}
+
+static int ipmi_atca_detect(struct ipmi_user *user)
+{
+	struct ipmi_system_interface_addr smi_addr;
+	struct kernel_ipmi_msg            send_msg;
+	int                               rv;
+	unsigned char                     data[1];
+
+	/*
+	 * Configure IPMI address for local access
+	 */
+	smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+	smi_addr.channel = IPMI_BMC_CHANNEL;
+	smi_addr.lun = 0;
+
+	/*
+	 * Use get address info to check and see if we are ATCA
+	 */
+	send_msg.netfn = IPMI_NETFN_ATCA;
+	send_msg.cmd = IPMI_ATCA_GET_ADDR_INFO_CMD;
+	data[0] = IPMI_PICMG_ID;
+	send_msg.data = data;
+	send_msg.data_len = sizeof(data);
+	rv = ipmi_request_wait_for_response(user,
+					    (struct ipmi_addr *) &smi_addr,
+					    &send_msg);
+
+	pr_info("ATCA Detect mfg 0x%X prod 0x%X\n", mfg_id, prod_id);
+	if ((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID)
+	    && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) {
+		pr_info("Installing Pigeon Point Systems Poweroff Hook\n");
+		atca_oem_poweroff_hook = pps_poweroff_atca;
+	}
+	return !rv;
+}
+
+static void ipmi_poweroff_atca(struct ipmi_user *user)
+{
+	struct ipmi_system_interface_addr smi_addr;
+	struct kernel_ipmi_msg            send_msg;
+	int                               rv;
+	unsigned char                     data[4];
+
+	/*
+	 * Configure IPMI address for local access
+	 */
+	smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+	smi_addr.channel = IPMI_BMC_CHANNEL;
+	smi_addr.lun = 0;
+
+	pr_info("Powering down via ATCA power command\n");
+
+	/*
+	 * Power down
+	 */
+	send_msg.netfn = IPMI_NETFN_ATCA;
+	send_msg.cmd = IPMI_ATCA_SET_POWER_CMD;
+	data[0] = IPMI_PICMG_ID;
+	data[1] = 0; /* FRU id */
+	data[2] = 0; /* Power Level */
+	data[3] = 0; /* Don't change saved presets */
+	send_msg.data = data;
+	send_msg.data_len = sizeof(data);
+	rv = ipmi_request_in_rc_mode(user,
+				     (struct ipmi_addr *) &smi_addr,
+				     &send_msg);
+	/*
+	 * At this point, the system may be shutting down, and most
+	 * serial drivers (if used) will have interrupts turned off
+	 * it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE
+	 * return code
+	 */
+	if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) {
+		pr_err("Unable to send ATCA powerdown message, IPMI error 0x%x\n",
+		       rv);
+		goto out;
+	}
+
+	if (atca_oem_poweroff_hook)
+		atca_oem_poweroff_hook(user);
+ out:
+	return;
+}
+
+/*
+ * CPI1 Support
+ */
+
+#define IPMI_NETFN_OEM_1				0xf8
+#define OEM_GRP_CMD_SET_RESET_STATE		0x84
+#define OEM_GRP_CMD_SET_POWER_STATE		0x82
+#define IPMI_NETFN_OEM_8				0xf8
+#define OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL	0x80
+#define OEM_GRP_CMD_GET_SLOT_GA			0xa3
+#define IPMI_NETFN_SENSOR_EVT			0x10
+#define IPMI_CMD_GET_EVENT_RECEIVER		0x01
+
+#define IPMI_CPI1_PRODUCT_ID		0x000157
+#define IPMI_CPI1_MANUFACTURER_ID	0x0108
+
+static int ipmi_cpi1_detect(struct ipmi_user *user)
+{
+	return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID)
+		&& (prod_id == IPMI_CPI1_PRODUCT_ID));
+}
+
+static void ipmi_poweroff_cpi1(struct ipmi_user *user)
+{
+	struct ipmi_system_interface_addr smi_addr;
+	struct ipmi_ipmb_addr             ipmb_addr;
+	struct kernel_ipmi_msg            send_msg;
+	int                               rv;
+	unsigned char                     data[1];
+	int                               slot;
+	unsigned char                     hotswap_ipmb;
+	unsigned char                     aer_addr;
+	unsigned char                     aer_lun;
+
+	/*
+	 * Configure IPMI address for local access
+	 */
+	smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+	smi_addr.channel = IPMI_BMC_CHANNEL;
+	smi_addr.lun = 0;
+
+	pr_info("Powering down via CPI1 power command\n");
+
+	/*
+	 * Get IPMI ipmb address
+	 */
+	send_msg.netfn = IPMI_NETFN_OEM_8 >> 2;
+	send_msg.cmd = OEM_GRP_CMD_GET_SLOT_GA;
+	send_msg.data = NULL;
+	send_msg.data_len = 0;
+	rv = ipmi_request_in_rc_mode(user,
+				     (struct ipmi_addr *) &smi_addr,
+				     &send_msg);
+	if (rv)
+		goto out;
+	slot = halt_recv_msg.msg.data[1];
+	hotswap_ipmb = (slot > 9) ? (0xb0 + 2 * slot) : (0xae + 2 * slot);
+
+	/*
+	 * Get active event receiver
+	 */
+	send_msg.netfn = IPMI_NETFN_SENSOR_EVT >> 2;
+	send_msg.cmd = IPMI_CMD_GET_EVENT_RECEIVER;
+	send_msg.data = NULL;
+	send_msg.data_len = 0;
+	rv = ipmi_request_in_rc_mode(user,
+				     (struct ipmi_addr *) &smi_addr,
+				     &send_msg);
+	if (rv)
+		goto out;
+	aer_addr = halt_recv_msg.msg.data[1];
+	aer_lun = halt_recv_msg.msg.data[2];
+
+	/*
+	 * Setup IPMB address target instead of local target
+	 */
+	ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE;
+	ipmb_addr.channel = 0;
+	ipmb_addr.slave_addr = aer_addr;
+	ipmb_addr.lun = aer_lun;
+
+	/*
+	 * Send request hotswap control to remove blade from dpv
+	 */
+	send_msg.netfn = IPMI_NETFN_OEM_8 >> 2;
+	send_msg.cmd = OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL;
+	send_msg.data = &hotswap_ipmb;
+	send_msg.data_len = 1;
+	ipmi_request_in_rc_mode(user,
+				(struct ipmi_addr *) &ipmb_addr,
+				&send_msg);
+
+	/*
+	 * Set reset asserted
+	 */
+	send_msg.netfn = IPMI_NETFN_OEM_1 >> 2;
+	send_msg.cmd = OEM_GRP_CMD_SET_RESET_STATE;
+	send_msg.data = data;
+	data[0] = 1; /* Reset asserted state */
+	send_msg.data_len = 1;
+	rv = ipmi_request_in_rc_mode(user,
+				     (struct ipmi_addr *) &smi_addr,
+				     &send_msg);
+	if (rv)
+		goto out;
+
+	/*
+	 * Power down
+	 */
+	send_msg.netfn = IPMI_NETFN_OEM_1 >> 2;
+	send_msg.cmd = OEM_GRP_CMD_SET_POWER_STATE;
+	send_msg.data = data;
+	data[0] = 1; /* Power down state */
+	send_msg.data_len = 1;
+	rv = ipmi_request_in_rc_mode(user,
+				     (struct ipmi_addr *) &smi_addr,
+				     &send_msg);
+	if (rv)
+		goto out;
+
+ out:
+	return;
+}
+
+/*
+ * ipmi_dell_chassis_detect()
+ * Dell systems with IPMI < 1.5 don't set the chassis capability bit
+ * but they can handle a chassis poweroff or powercycle command.
+ */
+
+#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00}
+static int ipmi_dell_chassis_detect(struct ipmi_user *user)
+{
+	const char ipmi_version_major = ipmi_version & 0xF;
+	const char ipmi_version_minor = (ipmi_version >> 4) & 0xF;
+	const char mfr[3] = DELL_IANA_MFR_ID;
+	if (!memcmp(mfr, &mfg_id, sizeof(mfr)) &&
+	    ipmi_version_major <= 1 &&
+	    ipmi_version_minor < 5)
+		return 1;
+	return 0;
+}
+
+/*
+ * ipmi_hp_chassis_detect()
+ * HP PA-RISC servers rp3410/rp3440, the C8000 workstation and the rx2600 and
+ * zx6000 machines support IPMI vers 1 and don't set the chassis capability bit
+ * but they can handle a chassis poweroff or powercycle command.
+ */
+
+#define HP_IANA_MFR_ID 0x0b
+#define HP_BMC_PROD_ID 0x8201
+static int ipmi_hp_chassis_detect(struct ipmi_user *user)
+{
+	if (mfg_id == HP_IANA_MFR_ID
+		&& prod_id == HP_BMC_PROD_ID
+		&& ipmi_version == 1)
+		return 1;
+	return 0;
+}
+
+/*
+ * Standard chassis support
+ */
+
+#define IPMI_NETFN_CHASSIS_REQUEST	0
+#define IPMI_CHASSIS_CONTROL_CMD	0x02
+
+static int ipmi_chassis_detect(struct ipmi_user *user)
+{
+	/* Chassis support, use it. */
+	return (capabilities & 0x80);
+}
+
+static void ipmi_poweroff_chassis(struct ipmi_user *user)
+{
+	struct ipmi_system_interface_addr smi_addr;
+	struct kernel_ipmi_msg            send_msg;
+	int                               rv;
+	unsigned char                     data[1];
+
+	/*
+	 * Configure IPMI address for local access
+	 */
+	smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+	smi_addr.channel = IPMI_BMC_CHANNEL;
+	smi_addr.lun = 0;
+
+ powercyclefailed:
+	pr_info("Powering %s via IPMI chassis control command\n",
+		(poweroff_powercycle ? "cycle" : "down"));
+
+	/*
+	 * Power down
+	 */
+	send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST;
+	send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD;
+	if (poweroff_powercycle)
+		data[0] = IPMI_CHASSIS_POWER_CYCLE;
+	else
+		data[0] = IPMI_CHASSIS_POWER_DOWN;
+	send_msg.data = data;
+	send_msg.data_len = sizeof(data);
+	rv = ipmi_request_in_rc_mode(user,
+				     (struct ipmi_addr *) &smi_addr,
+				     &send_msg);
+	if (rv) {
+		if (poweroff_powercycle) {
+			/* power cycle failed, default to power down */
+			pr_err("Unable to send chassis power cycle message, IPMI error 0x%x\n",
+			       rv);
+			poweroff_powercycle = 0;
+			goto powercyclefailed;
+		}
+
+		pr_err("Unable to send chassis power down message, IPMI error 0x%x\n",
+		       rv);
+	}
+}
+
+
+/* Table of possible power off functions. */
+struct poweroff_function {
+	char *platform_type;
+	int  (*detect)(struct ipmi_user *user);
+	void (*poweroff_func)(struct ipmi_user *user);
+};
+
+static struct poweroff_function poweroff_functions[] = {
+	{ .platform_type	= "ATCA",
+	  .detect		= ipmi_atca_detect,
+	  .poweroff_func	= ipmi_poweroff_atca },
+	{ .platform_type	= "CPI1",
+	  .detect		= ipmi_cpi1_detect,
+	  .poweroff_func	= ipmi_poweroff_cpi1 },
+	{ .platform_type	= "chassis",
+	  .detect		= ipmi_dell_chassis_detect,
+	  .poweroff_func	= ipmi_poweroff_chassis },
+	{ .platform_type	= "chassis",
+	  .detect		= ipmi_hp_chassis_detect,
+	  .poweroff_func	= ipmi_poweroff_chassis },
+	/* Chassis should generally be last, other things should override
+	   it. */
+	{ .platform_type	= "chassis",
+	  .detect		= ipmi_chassis_detect,
+	  .poweroff_func	= ipmi_poweroff_chassis },
+};
+#define NUM_PO_FUNCS ARRAY_SIZE(poweroff_functions)
+
+
+/* Called on a powerdown request. */
+static void ipmi_poweroff_function(void)
+{
+	if (!ready)
+		return;
+
+	/* Use run-to-completion mode, since interrupts may be off. */
+	specific_poweroff_func(ipmi_user);
+}
+
+/* Wait for an IPMI interface to be installed, the first one installed
+   will be grabbed by this code and used to perform the powerdown. */
+static void ipmi_po_new_smi(int if_num, struct device *device)
+{
+	struct ipmi_system_interface_addr smi_addr;
+	struct kernel_ipmi_msg            send_msg;
+	int                               rv;
+	int                               i;
+
+	if (ready)
+		return;
+
+	if ((ifnum_to_use >= 0) && (ifnum_to_use != if_num))
+		return;
+
+	rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL,
+			      &ipmi_user);
+	if (rv) {
+		pr_err("could not create IPMI user, error %d\n", rv);
+		return;
+	}
+
+	ipmi_ifnum = if_num;
+
+	/*
+	 * Do a get device ide and store some results, since this is
+	 * used by several functions.
+	 */
+	smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+	smi_addr.channel = IPMI_BMC_CHANNEL;
+	smi_addr.lun = 0;
+
+	send_msg.netfn = IPMI_NETFN_APP_REQUEST;
+	send_msg.cmd = IPMI_GET_DEVICE_ID_CMD;
+	send_msg.data = NULL;
+	send_msg.data_len = 0;
+	rv = ipmi_request_wait_for_response(ipmi_user,
+					    (struct ipmi_addr *) &smi_addr,
+					    &send_msg);
+	if (rv) {
+		pr_err("Unable to send IPMI get device id info, IPMI error 0x%x\n",
+		       rv);
+		goto out_err;
+	}
+
+	if (halt_recv_msg.msg.data_len < 12) {
+		pr_err("(chassis) IPMI get device id info too short, was %d bytes, needed %d bytes\n",
+		       halt_recv_msg.msg.data_len, 12);
+		goto out_err;
+	}
+
+	mfg_id = (halt_recv_msg.msg.data[7]
+		  | (halt_recv_msg.msg.data[8] << 8)
+		  | (halt_recv_msg.msg.data[9] << 16));
+	prod_id = (halt_recv_msg.msg.data[10]
+		   | (halt_recv_msg.msg.data[11] << 8));
+	capabilities = halt_recv_msg.msg.data[6];
+	ipmi_version = halt_recv_msg.msg.data[5];
+
+
+	/* Scan for a poweroff method */
+	for (i = 0; i < NUM_PO_FUNCS; i++) {
+		if (poweroff_functions[i].detect(ipmi_user))
+			goto found;
+	}
+
+ out_err:
+	pr_err("Unable to find a poweroff function that will work, giving up\n");
+	ipmi_destroy_user(ipmi_user);
+	return;
+
+ found:
+	pr_info("Found a %s style poweroff function\n",
+		poweroff_functions[i].platform_type);
+	specific_poweroff_func = poweroff_functions[i].poweroff_func;
+	old_poweroff_func = pm_power_off;
+	pm_power_off = ipmi_poweroff_function;
+	ready = 1;
+}
+
+static void ipmi_po_smi_gone(int if_num)
+{
+	if (!ready)
+		return;
+
+	if (ipmi_ifnum != if_num)
+		return;
+
+	ready = 0;
+	ipmi_destroy_user(ipmi_user);
+	pm_power_off = old_poweroff_func;
+}
+
+static struct ipmi_smi_watcher smi_watcher = {
+	.owner    = THIS_MODULE,
+	.new_smi  = ipmi_po_new_smi,
+	.smi_gone = ipmi_po_smi_gone
+};
+
+
+#ifdef CONFIG_PROC_FS
+#include <linux/sysctl.h>
+
+static struct ctl_table ipmi_table[] = {
+	{ .procname	= "poweroff_powercycle",
+	  .data		= &poweroff_powercycle,
+	  .maxlen	= sizeof(poweroff_powercycle),
+	  .mode		= 0644,
+	  .proc_handler	= proc_dointvec },
+	{ }
+};
+
+static struct ctl_table ipmi_dir_table[] = {
+	{ .procname	= "ipmi",
+	  .mode		= 0555,
+	  .child	= ipmi_table },
+	{ }
+};
+
+static struct ctl_table ipmi_root_table[] = {
+	{ .procname	= "dev",
+	  .mode		= 0555,
+	  .child	= ipmi_dir_table },
+	{ }
+};
+
+static struct ctl_table_header *ipmi_table_header;
+#endif /* CONFIG_PROC_FS */
+
+/*
+ * Startup and shutdown functions.
+ */
+static int __init ipmi_poweroff_init(void)
+{
+	int rv;
+
+	pr_info("Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot\n");
+
+	if (poweroff_powercycle)
+		pr_info("Power cycle is enabled\n");
+
+#ifdef CONFIG_PROC_FS
+	ipmi_table_header = register_sysctl_table(ipmi_root_table);
+	if (!ipmi_table_header) {
+		pr_err("Unable to register powercycle sysctl\n");
+		rv = -ENOMEM;
+		goto out_err;
+	}
+#endif
+
+	rv = ipmi_smi_watcher_register(&smi_watcher);
+
+#ifdef CONFIG_PROC_FS
+	if (rv) {
+		unregister_sysctl_table(ipmi_table_header);
+		pr_err("Unable to register SMI watcher: %d\n", rv);
+		goto out_err;
+	}
+
+ out_err:
+#endif
+	return rv;
+}
+
+#ifdef MODULE
+static void __exit ipmi_poweroff_cleanup(void)
+{
+	int rv;
+
+#ifdef CONFIG_PROC_FS
+	unregister_sysctl_table(ipmi_table_header);
+#endif
+
+	ipmi_smi_watcher_unregister(&smi_watcher);
+
+	if (ready) {
+		rv = ipmi_destroy_user(ipmi_user);
+		if (rv)
+			pr_err("could not cleanup the IPMI user: 0x%x\n", rv);
+		pm_power_off = old_poweroff_func;
+	}
+}
+module_exit(ipmi_poweroff_cleanup);
+#endif
+
+module_init(ipmi_poweroff_init);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
+MODULE_DESCRIPTION("IPMI Poweroff extension to sys_reboot");