Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

23 files changed, 9927 insertions, 0 deletions

diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
new file mode 100644
index 000000000..ec738f74a
--- /dev/null
+++ b/drivers/clk/bcm/Kconfig
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config CLK_BCM2711_DVP
+	tristate "Broadcom BCM2711 DVP support"
+	depends on ARCH_BCM2835 ||COMPILE_TEST
+	depends on COMMON_CLK
+	default ARCH_BCM2835
+	select RESET_CONTROLLER
+	select RESET_SIMPLE
+	help
+	  Enable common clock framework support for the Broadcom BCM2711
+	  DVP Controller.
+
+config CLK_BCM2835
+	bool "Broadcom BCM2835 clock support"
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
+	depends on COMMON_CLK
+	default ARCH_BCM2835 || ARCH_BRCMSTB
+	help
+	  Enable common clock framework support for Broadcom BCM2835
+	  SoCs.
+
+config CLK_BCM_63XX
+	bool "Broadcom BCM63xx clock support"
+	depends on ARCH_BCM_63XX || COMPILE_TEST
+	select COMMON_CLK_IPROC
+	default ARCH_BCM_63XX
+	help
+	  Enable common clock framework support for Broadcom BCM63xx DSL SoCs
+	  based on the ARM architecture
+
+config CLK_BCM_63XX_GATE
+	bool "Broadcom BCM63xx gated clock support"
+	depends on BMIPS_GENERIC || COMPILE_TEST
+	default BMIPS_GENERIC
+	help
+	  Enable common clock framework support for Broadcom BCM63xx DSL SoCs
+	  based on the MIPS architecture
+
+config CLK_BCM_KONA
+	bool "Broadcom Kona CCU clock support"
+	depends on ARCH_BCM_MOBILE || COMPILE_TEST
+	default ARCH_BCM_MOBILE
+	help
+	  Enable common clock framework support for Broadcom SoCs
+	  using "Kona" style clock control units, including those
+	  in the BCM281xx and BCM21664 families.
+
+config COMMON_CLK_IPROC
+	bool
+	help
+	  Enable common clock framework support for Broadcom SoCs
+	  based on the iProc architecture
+
+config CLK_BCM_CYGNUS
+	bool "Broadcom Cygnus clock support"
+	depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+	select COMMON_CLK_IPROC
+	default ARCH_BCM_CYGNUS
+	help
+	  Enable common clock framework support for the Broadcom Cygnus SoC
+
+config CLK_BCM_HR2
+	bool "Broadcom Hurricane 2 clock support"
+	depends on ARCH_BCM_HR2 || COMPILE_TEST
+	select COMMON_CLK_IPROC
+	default ARCH_BCM_HR2
+	help
+	  Enable common clock framework support for the Broadcom Hurricane 2
+	  SoC
+
+config CLK_BCM_NSP
+	bool "Broadcom Northstar/Northstar Plus clock support"
+	depends on ARCH_BCM_5301X || ARCH_BCM_NSP || COMPILE_TEST
+	select COMMON_CLK_IPROC
+	default ARCH_BCM_5301X || ARCH_BCM_NSP
+	help
+	  Enable common clock framework support for the Broadcom Northstar and
+	  Northstar Plus SoCs
+
+config CLK_BCM_NS2
+	bool "Broadcom Northstar 2 clock support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	select COMMON_CLK_IPROC
+	default ARCH_BCM_IPROC
+	help
+	  Enable common clock framework support for the Broadcom Northstar 2 SoC
+
+config CLK_BCM_SR
+	bool "Broadcom Stingray clock support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	select COMMON_CLK_IPROC
+	default ARCH_BCM_IPROC
+	help
+	  Enable common clock framework support for the Broadcom Stingray SoC
+
+config CLK_RASPBERRYPI
+	tristate "Raspberry Pi firmware based clock support"
+	depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
+	help
+	  Enable common clock framework support for Raspberry Pi's firmware
+	  dependent clocks
diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile
new file mode 100644
index 000000000..edb66b44c
--- /dev/null
+++ b/drivers/clk/bcm/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CLK_BCM_63XX)	+= clk-bcm63xx.o
+obj-$(CONFIG_CLK_BCM_63XX_GATE)	+= clk-bcm63xx-gate.o
+obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona.o
+obj-$(CONFIG_CLK_BCM_KONA)	+= clk-kona-setup.o
+obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm281xx.o
+obj-$(CONFIG_CLK_BCM_KONA)	+= clk-bcm21664.o
+obj-$(CONFIG_COMMON_CLK_IPROC)	+= clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+obj-$(CONFIG_CLK_BCM2711_DVP)	+= clk-bcm2711-dvp.o
+obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2835.o
+obj-$(CONFIG_CLK_BCM2835)	+= clk-bcm2835-aux.o
+obj-$(CONFIG_CLK_RASPBERRYPI)	+= clk-raspberrypi.o
+obj-$(CONFIG_ARCH_BCM_53573)	+= clk-bcm53573-ilp.o
+obj-$(CONFIG_CLK_BCM_CYGNUS)	+= clk-cygnus.o
+obj-$(CONFIG_CLK_BCM_HR2)	+= clk-hr2.o
+obj-$(CONFIG_CLK_BCM_NSP)	+= clk-nsp.o
+obj-$(CONFIG_CLK_BCM_NS2)	+= clk-ns2.o
+obj-$(CONFIG_CLK_BCM_SR)	+= clk-sr.o
diff --git a/drivers/clk/bcm/clk-bcm21664.c b/drivers/clk/bcm/clk-bcm21664.c
new file mode 100644
index 000000000..eeae4cad2
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm21664.c
@@ -0,0 +1,290 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ * Copyright 2014 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "clk-kona.h"
+#include "dt-bindings/clock/bcm21664.h"
+
+#define BCM21664_CCU_COMMON(_name, _capname) \
+	KONA_CCU_COMMON(BCM21664, _name, _capname)
+
+/* Root CCU */
+
+static struct peri_clk_data frac_1m_data = {
+	.gate		= HW_SW_GATE(0x214, 16, 0, 1),
+	.clocks		= CLOCKS("ref_crystal"),
+};
+
+static struct ccu_data root_ccu_data = {
+	BCM21664_CCU_COMMON(root, ROOT),
+	/* no policy control */
+	.kona_clks	= {
+		[BCM21664_ROOT_CCU_FRAC_1M] =
+			KONA_CLK(root, frac_1m, peri),
+		[BCM21664_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* AON CCU */
+
+static struct peri_clk_data hub_timer_data = {
+	.gate		= HW_SW_GATE(0x0414, 16, 0, 1),
+	.hyst		= HYST(0x0414, 8, 9),
+	.clocks		= CLOCKS("bbl_32k",
+				 "frac_1m",
+				 "dft_19_5m"),
+	.sel		= SELECTOR(0x0a10, 0, 2),
+	.trig		= TRIGGER(0x0a40, 4),
+};
+
+static struct ccu_data aon_ccu_data = {
+	BCM21664_CCU_COMMON(aon, AON),
+	.policy		= {
+		.enable		= CCU_LVM_EN(0x0034, 0),
+		.control	= CCU_POLICY_CTL(0x000c, 0, 1, 2),
+	},
+	.kona_clks	= {
+		[BCM21664_AON_CCU_HUB_TIMER] =
+			KONA_CLK(aon, hub_timer, peri),
+		[BCM21664_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* Master CCU */
+
+static struct peri_clk_data sdio1_data = {
+	.gate		= HW_SW_GATE(0x0358, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a28, 0, 3),
+	.div		= DIVIDER(0x0a28, 4, 14),
+	.trig		= TRIGGER(0x0afc, 9),
+};
+
+static struct peri_clk_data sdio2_data = {
+	.gate		= HW_SW_GATE(0x035c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a2c, 0, 3),
+	.div		= DIVIDER(0x0a2c, 4, 14),
+	.trig		= TRIGGER(0x0afc, 10),
+};
+
+static struct peri_clk_data sdio3_data = {
+	.gate		= HW_SW_GATE(0x0364, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a34, 0, 3),
+	.div		= DIVIDER(0x0a34, 4, 14),
+	.trig		= TRIGGER(0x0afc, 12),
+};
+
+static struct peri_clk_data sdio4_data = {
+	.gate		= HW_SW_GATE(0x0360, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a30, 0, 3),
+	.div		= DIVIDER(0x0a30, 4, 14),
+	.trig		= TRIGGER(0x0afc, 11),
+};
+
+static struct peri_clk_data sdio1_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),	/* Verify */
+	.gate		= HW_SW_GATE(0x0358, 18, 2, 3),
+};
+
+static struct peri_clk_data sdio2_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),	/* Verify */
+	.gate		= HW_SW_GATE(0x035c, 18, 2, 3),
+};
+
+static struct peri_clk_data sdio3_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),	/* Verify */
+	.gate		= HW_SW_GATE(0x0364, 18, 2, 3),
+};
+
+static struct peri_clk_data sdio4_sleep_data = {
+	.clocks		= CLOCKS("ref_32k"),	/* Verify */
+	.gate		= HW_SW_GATE(0x0360, 18, 2, 3),
+};
+
+static struct ccu_data master_ccu_data = {
+	BCM21664_CCU_COMMON(master, MASTER),
+	.policy		= {
+		.enable		= CCU_LVM_EN(0x0034, 0),
+		.control	= CCU_POLICY_CTL(0x000c, 0, 1, 2),
+	},
+	.kona_clks	= {
+		[BCM21664_MASTER_CCU_SDIO1] =
+			KONA_CLK(master, sdio1, peri),
+		[BCM21664_MASTER_CCU_SDIO2] =
+			KONA_CLK(master, sdio2, peri),
+		[BCM21664_MASTER_CCU_SDIO3] =
+			KONA_CLK(master, sdio3, peri),
+		[BCM21664_MASTER_CCU_SDIO4] =
+			KONA_CLK(master, sdio4, peri),
+		[BCM21664_MASTER_CCU_SDIO1_SLEEP] =
+			KONA_CLK(master, sdio1_sleep, peri),
+		[BCM21664_MASTER_CCU_SDIO2_SLEEP] =
+			KONA_CLK(master, sdio2_sleep, peri),
+		[BCM21664_MASTER_CCU_SDIO3_SLEEP] =
+			KONA_CLK(master, sdio3_sleep, peri),
+		[BCM21664_MASTER_CCU_SDIO4_SLEEP] =
+			KONA_CLK(master, sdio4_sleep, peri),
+		[BCM21664_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* Slave CCU */
+
+static struct peri_clk_data uartb_data = {
+	.gate		= HW_SW_GATE(0x0400, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_156m",
+				 "ref_156m"),
+	.sel		= SELECTOR(0x0a10, 0, 2),
+	.div		= FRAC_DIVIDER(0x0a10, 4, 12, 8),
+	.trig		= TRIGGER(0x0afc, 2),
+};
+
+static struct peri_clk_data uartb2_data = {
+	.gate		= HW_SW_GATE(0x0404, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_156m",
+				 "ref_156m"),
+	.sel		= SELECTOR(0x0a14, 0, 2),
+	.div		= FRAC_DIVIDER(0x0a14, 4, 12, 8),
+	.trig		= TRIGGER(0x0afc, 3),
+};
+
+static struct peri_clk_data uartb3_data = {
+	.gate		= HW_SW_GATE(0x0408, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_156m",
+				 "ref_156m"),
+	.sel		= SELECTOR(0x0a18, 0, 2),
+	.div		= FRAC_DIVIDER(0x0a18, 4, 12, 8),
+	.trig		= TRIGGER(0x0afc, 4),
+};
+
+static struct peri_clk_data bsc1_data = {
+	.gate		= HW_SW_GATE(0x0458, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a64, 0, 3),
+	.trig		= TRIGGER(0x0afc, 23),
+};
+
+static struct peri_clk_data bsc2_data = {
+	.gate		= HW_SW_GATE(0x045c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a68, 0, 3),
+	.trig		= TRIGGER(0x0afc, 24),
+};
+
+static struct peri_clk_data bsc3_data = {
+	.gate		= HW_SW_GATE(0x0470, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a7c, 0, 3),
+	.trig		= TRIGGER(0x0afc, 18),
+};
+
+static struct peri_clk_data bsc4_data = {
+	.gate		= HW_SW_GATE(0x0474, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a80, 0, 3),
+	.trig		= TRIGGER(0x0afc, 19),
+};
+
+static struct ccu_data slave_ccu_data = {
+	BCM21664_CCU_COMMON(slave, SLAVE),
+       .policy		= {
+		.enable		= CCU_LVM_EN(0x0034, 0),
+		.control	= CCU_POLICY_CTL(0x000c, 0, 1, 2),
+	},
+	.kona_clks	= {
+		[BCM21664_SLAVE_CCU_UARTB] =
+			KONA_CLK(slave, uartb, peri),
+		[BCM21664_SLAVE_CCU_UARTB2] =
+			KONA_CLK(slave, uartb2, peri),
+		[BCM21664_SLAVE_CCU_UARTB3] =
+			KONA_CLK(slave, uartb3, peri),
+		[BCM21664_SLAVE_CCU_BSC1] =
+			KONA_CLK(slave, bsc1, peri),
+		[BCM21664_SLAVE_CCU_BSC2] =
+			KONA_CLK(slave, bsc2, peri),
+		[BCM21664_SLAVE_CCU_BSC3] =
+			KONA_CLK(slave, bsc3, peri),
+		[BCM21664_SLAVE_CCU_BSC4] =
+			KONA_CLK(slave, bsc4, peri),
+		[BCM21664_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* Device tree match table callback functions */
+
+static void __init kona_dt_root_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&root_ccu_data, node);
+}
+
+static void __init kona_dt_aon_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&aon_ccu_data, node);
+}
+
+static void __init kona_dt_master_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&master_ccu_data, node);
+}
+
+static void __init kona_dt_slave_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&slave_ccu_data, node);
+}
+
+CLK_OF_DECLARE(bcm21664_root_ccu, BCM21664_DT_ROOT_CCU_COMPAT,
+			kona_dt_root_ccu_setup);
+CLK_OF_DECLARE(bcm21664_aon_ccu, BCM21664_DT_AON_CCU_COMPAT,
+			kona_dt_aon_ccu_setup);
+CLK_OF_DECLARE(bcm21664_master_ccu, BCM21664_DT_MASTER_CCU_COMPAT,
+			kona_dt_master_ccu_setup);
+CLK_OF_DECLARE(bcm21664_slave_ccu, BCM21664_DT_SLAVE_CCU_COMPAT,
+			kona_dt_slave_ccu_setup);
diff --git a/drivers/clk/bcm/clk-bcm2711-dvp.c b/drivers/clk/bcm/clk-bcm2711-dvp.c
new file mode 100644
index 000000000..69e2f85f7
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2711-dvp.c
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 Cerno
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/reset/reset-simple.h>
+
+#define DVP_HT_RPI_SW_INIT	0x04
+#define DVP_HT_RPI_MISC_CONFIG	0x08
+
+#define NR_CLOCKS	2
+#define NR_RESETS	6
+
+struct clk_dvp {
+	struct clk_hw_onecell_data	*data;
+	struct reset_simple_data	reset;
+};
+
+static const struct clk_parent_data clk_dvp_parent = {
+	.index	= 0,
+};
+
+static int clk_dvp_probe(struct platform_device *pdev)
+{
+	struct clk_hw_onecell_data *data;
+	struct resource *res;
+	struct clk_dvp *dvp;
+	void __iomem *base;
+	int ret;
+
+	dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL);
+	if (!dvp)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, dvp);
+
+	dvp->data = devm_kzalloc(&pdev->dev,
+				 struct_size(dvp->data, hws, NR_CLOCKS),
+				 GFP_KERNEL);
+	if (!dvp->data)
+		return -ENOMEM;
+	data = dvp->data;
+
+	base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	dvp->reset.rcdev.owner = THIS_MODULE;
+	dvp->reset.rcdev.nr_resets = NR_RESETS;
+	dvp->reset.rcdev.ops = &reset_simple_ops;
+	dvp->reset.rcdev.of_node = pdev->dev.of_node;
+	dvp->reset.membase = base + DVP_HT_RPI_SW_INIT;
+	spin_lock_init(&dvp->reset.lock);
+
+	ret = devm_reset_controller_register(&pdev->dev, &dvp->reset.rcdev);
+	if (ret)
+		return ret;
+
+	data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev,
+							"hdmi0-108MHz",
+							&clk_dvp_parent, 0,
+							base + DVP_HT_RPI_MISC_CONFIG, 3,
+							CLK_GATE_SET_TO_DISABLE,
+							&dvp->reset.lock);
+	if (IS_ERR(data->hws[0]))
+		return PTR_ERR(data->hws[0]);
+
+	data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev,
+							"hdmi1-108MHz",
+							&clk_dvp_parent, 0,
+							base + DVP_HT_RPI_MISC_CONFIG, 4,
+							CLK_GATE_SET_TO_DISABLE,
+							&dvp->reset.lock);
+	if (IS_ERR(data->hws[1])) {
+		ret = PTR_ERR(data->hws[1]);
+		goto unregister_clk0;
+	}
+
+	data->num = NR_CLOCKS;
+	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+				     data);
+	if (ret)
+		goto unregister_clk1;
+
+	return 0;
+
+unregister_clk1:
+	clk_hw_unregister_gate(data->hws[1]);
+
+unregister_clk0:
+	clk_hw_unregister_gate(data->hws[0]);
+	return ret;
+};
+
+static int clk_dvp_remove(struct platform_device *pdev)
+{
+	struct clk_dvp *dvp = platform_get_drvdata(pdev);
+	struct clk_hw_onecell_data *data = dvp->data;
+
+	clk_hw_unregister_gate(data->hws[1]);
+	clk_hw_unregister_gate(data->hws[0]);
+
+	return 0;
+}
+
+static const struct of_device_id clk_dvp_dt_ids[] = {
+	{ .compatible = "brcm,brcm2711-dvp", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, clk_dvp_dt_ids);
+
+static struct platform_driver clk_dvp_driver = {
+	.probe	= clk_dvp_probe,
+	.remove	= clk_dvp_remove,
+	.driver	= {
+		.name		= "brcm2711-dvp",
+		.of_match_table	= clk_dvp_dt_ids,
+	},
+};
+module_platform_driver(clk_dvp_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime@cerno.tech>");
+MODULE_DESCRIPTION("BCM2711 DVP clock driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/bcm/clk-bcm281xx.c b/drivers/clk/bcm/clk-bcm281xx.c
new file mode 100644
index 000000000..502a487d6
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm281xx.c
@@ -0,0 +1,375 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "clk-kona.h"
+#include "dt-bindings/clock/bcm281xx.h"
+
+#define BCM281XX_CCU_COMMON(_name, _ucase_name) \
+	KONA_CCU_COMMON(BCM281XX, _name, _ucase_name)
+
+/* Root CCU */
+
+static struct peri_clk_data frac_1m_data = {
+	.gate		= HW_SW_GATE(0x214, 16, 0, 1),
+	.trig		= TRIGGER(0x0e04, 0),
+	.div		= FRAC_DIVIDER(0x0e00, 0, 22, 16),
+	.clocks		= CLOCKS("ref_crystal"),
+};
+
+static struct ccu_data root_ccu_data = {
+	BCM281XX_CCU_COMMON(root, ROOT),
+	.kona_clks	= {
+		[BCM281XX_ROOT_CCU_FRAC_1M] =
+			KONA_CLK(root, frac_1m, peri),
+		[BCM281XX_ROOT_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* AON CCU */
+
+static struct peri_clk_data hub_timer_data = {
+	.gate		= HW_SW_GATE(0x0414, 16, 0, 1),
+	.clocks		= CLOCKS("bbl_32k",
+				 "frac_1m",
+				 "dft_19_5m"),
+	.sel		= SELECTOR(0x0a10, 0, 2),
+	.trig		= TRIGGER(0x0a40, 4),
+};
+
+static struct peri_clk_data pmu_bsc_data = {
+	.gate		= HW_SW_GATE(0x0418, 16, 0, 1),
+	.clocks		= CLOCKS("ref_crystal",
+				 "pmu_bsc_var",
+				 "bbl_32k"),
+	.sel		= SELECTOR(0x0a04, 0, 2),
+	.div		= DIVIDER(0x0a04, 3, 4),
+	.trig		= TRIGGER(0x0a40, 0),
+};
+
+static struct peri_clk_data pmu_bsc_var_data = {
+	.clocks		= CLOCKS("var_312m",
+				 "ref_312m"),
+	.sel		= SELECTOR(0x0a00, 0, 2),
+	.div		= DIVIDER(0x0a00, 4, 5),
+	.trig		= TRIGGER(0x0a40, 2),
+};
+
+static struct ccu_data aon_ccu_data = {
+	BCM281XX_CCU_COMMON(aon, AON),
+	.kona_clks	= {
+		[BCM281XX_AON_CCU_HUB_TIMER] =
+			KONA_CLK(aon, hub_timer, peri),
+		[BCM281XX_AON_CCU_PMU_BSC] =
+			KONA_CLK(aon, pmu_bsc, peri),
+		[BCM281XX_AON_CCU_PMU_BSC_VAR] =
+			KONA_CLK(aon, pmu_bsc_var, peri),
+		[BCM281XX_AON_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* Hub CCU */
+
+static struct peri_clk_data tmon_1m_data = {
+	.gate		= HW_SW_GATE(0x04a4, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "frac_1m"),
+	.sel		= SELECTOR(0x0e74, 0, 2),
+	.trig		= TRIGGER(0x0e84, 1),
+};
+
+static struct ccu_data hub_ccu_data = {
+	BCM281XX_CCU_COMMON(hub, HUB),
+	.kona_clks	= {
+		[BCM281XX_HUB_CCU_TMON_1M] =
+			KONA_CLK(hub, tmon_1m, peri),
+		[BCM281XX_HUB_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* Master CCU */
+
+static struct peri_clk_data sdio1_data = {
+	.gate		= HW_SW_GATE(0x0358, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a28, 0, 3),
+	.div		= DIVIDER(0x0a28, 4, 14),
+	.trig		= TRIGGER(0x0afc, 9),
+};
+
+static struct peri_clk_data sdio2_data = {
+	.gate		= HW_SW_GATE(0x035c, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a2c, 0, 3),
+	.div		= DIVIDER(0x0a2c, 4, 14),
+	.trig		= TRIGGER(0x0afc, 10),
+};
+
+static struct peri_clk_data sdio3_data = {
+	.gate		= HW_SW_GATE(0x0364, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a34, 0, 3),
+	.div		= DIVIDER(0x0a34, 4, 14),
+	.trig		= TRIGGER(0x0afc, 12),
+};
+
+static struct peri_clk_data sdio4_data = {
+	.gate		= HW_SW_GATE(0x0360, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_52m",
+				 "ref_52m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a30, 0, 3),
+	.div		= DIVIDER(0x0a30, 4, 14),
+	.trig		= TRIGGER(0x0afc, 11),
+};
+
+static struct peri_clk_data usb_ic_data = {
+	.gate		= HW_SW_GATE(0x0354, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_96m",
+				 "ref_96m"),
+	.div		= FIXED_DIVIDER(2),
+	.sel		= SELECTOR(0x0a24, 0, 2),
+	.trig		= TRIGGER(0x0afc, 7),
+};
+
+/* also called usbh_48m */
+static struct peri_clk_data hsic2_48m_data = {
+	.gate		= HW_SW_GATE(0x0370, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a38, 0, 2),
+	.div		= FIXED_DIVIDER(2),
+	.trig		= TRIGGER(0x0afc, 5),
+};
+
+/* also called usbh_12m */
+static struct peri_clk_data hsic2_12m_data = {
+	.gate		= HW_SW_GATE(0x0370, 20, 4, 5),
+	.div		= DIVIDER(0x0a38, 12, 2),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_96m",
+				 "ref_96m"),
+	.pre_div	= FIXED_DIVIDER(2),
+	.sel		= SELECTOR(0x0a38, 0, 2),
+	.trig		= TRIGGER(0x0afc, 5),
+};
+
+static struct ccu_data master_ccu_data = {
+	BCM281XX_CCU_COMMON(master, MASTER),
+	.kona_clks	= {
+		[BCM281XX_MASTER_CCU_SDIO1] =
+			KONA_CLK(master, sdio1, peri),
+		[BCM281XX_MASTER_CCU_SDIO2] =
+			KONA_CLK(master, sdio2, peri),
+		[BCM281XX_MASTER_CCU_SDIO3] =
+			KONA_CLK(master, sdio3, peri),
+		[BCM281XX_MASTER_CCU_SDIO4] =
+			KONA_CLK(master, sdio4, peri),
+		[BCM281XX_MASTER_CCU_USB_IC] =
+			KONA_CLK(master, usb_ic, peri),
+		[BCM281XX_MASTER_CCU_HSIC2_48M] =
+			KONA_CLK(master, hsic2_48m, peri),
+		[BCM281XX_MASTER_CCU_HSIC2_12M] =
+			KONA_CLK(master, hsic2_12m, peri),
+		[BCM281XX_MASTER_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* Slave CCU */
+
+static struct peri_clk_data uartb_data = {
+	.gate		= HW_SW_GATE(0x0400, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_156m",
+				 "ref_156m"),
+	.sel		= SELECTOR(0x0a10, 0, 2),
+	.div		= FRAC_DIVIDER(0x0a10, 4, 12, 8),
+	.trig		= TRIGGER(0x0afc, 2),
+};
+
+static struct peri_clk_data uartb2_data = {
+	.gate		= HW_SW_GATE(0x0404, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_156m",
+				 "ref_156m"),
+	.sel		= SELECTOR(0x0a14, 0, 2),
+	.div		= FRAC_DIVIDER(0x0a14, 4, 12, 8),
+	.trig		= TRIGGER(0x0afc, 3),
+};
+
+static struct peri_clk_data uartb3_data = {
+	.gate		= HW_SW_GATE(0x0408, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_156m",
+				 "ref_156m"),
+	.sel		= SELECTOR(0x0a18, 0, 2),
+	.div		= FRAC_DIVIDER(0x0a18, 4, 12, 8),
+	.trig		= TRIGGER(0x0afc, 4),
+};
+
+static struct peri_clk_data uartb4_data = {
+	.gate		= HW_SW_GATE(0x0408, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_156m",
+				 "ref_156m"),
+	.sel		= SELECTOR(0x0a1c, 0, 2),
+	.div		= FRAC_DIVIDER(0x0a1c, 4, 12, 8),
+	.trig		= TRIGGER(0x0afc, 5),
+};
+
+static struct peri_clk_data ssp0_data = {
+	.gate		= HW_SW_GATE(0x0410, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a20, 0, 3),
+	.div		= DIVIDER(0x0a20, 4, 14),
+	.trig		= TRIGGER(0x0afc, 6),
+};
+
+static struct peri_clk_data ssp2_data = {
+	.gate		= HW_SW_GATE(0x0418, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_96m",
+				 "ref_96m"),
+	.sel		= SELECTOR(0x0a28, 0, 3),
+	.div		= DIVIDER(0x0a28, 4, 14),
+	.trig		= TRIGGER(0x0afc, 8),
+};
+
+static struct peri_clk_data bsc1_data = {
+	.gate		= HW_SW_GATE(0x0458, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a64, 0, 3),
+	.trig		= TRIGGER(0x0afc, 23),
+};
+
+static struct peri_clk_data bsc2_data = {
+	.gate		= HW_SW_GATE(0x045c, 18, 2, 3),
+	.clocks	= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a68, 0, 3),
+	.trig		= TRIGGER(0x0afc, 24),
+};
+
+static struct peri_clk_data bsc3_data = {
+	.gate		= HW_SW_GATE(0x0484, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m",
+				 "ref_104m",
+				 "var_13m",
+				 "ref_13m"),
+	.sel		= SELECTOR(0x0a84, 0, 3),
+	.trig		= TRIGGER(0x0b00, 2),
+};
+
+static struct peri_clk_data pwm_data = {
+	.gate		= HW_SW_GATE(0x0468, 18, 2, 3),
+	.clocks		= CLOCKS("ref_crystal",
+				 "var_104m"),
+	.sel		= SELECTOR(0x0a70, 0, 2),
+	.div		= DIVIDER(0x0a70, 4, 3),
+	.trig		= TRIGGER(0x0afc, 15),
+};
+
+static struct ccu_data slave_ccu_data = {
+	BCM281XX_CCU_COMMON(slave, SLAVE),
+	.kona_clks	= {
+		[BCM281XX_SLAVE_CCU_UARTB] =
+			KONA_CLK(slave, uartb, peri),
+		[BCM281XX_SLAVE_CCU_UARTB2] =
+			KONA_CLK(slave, uartb2, peri),
+		[BCM281XX_SLAVE_CCU_UARTB3] =
+			KONA_CLK(slave, uartb3, peri),
+		[BCM281XX_SLAVE_CCU_UARTB4] =
+			KONA_CLK(slave, uartb4, peri),
+		[BCM281XX_SLAVE_CCU_SSP0] =
+			KONA_CLK(slave, ssp0, peri),
+		[BCM281XX_SLAVE_CCU_SSP2] =
+			KONA_CLK(slave, ssp2, peri),
+		[BCM281XX_SLAVE_CCU_BSC1] =
+			KONA_CLK(slave, bsc1, peri),
+		[BCM281XX_SLAVE_CCU_BSC2] =
+			KONA_CLK(slave, bsc2, peri),
+		[BCM281XX_SLAVE_CCU_BSC3] =
+			KONA_CLK(slave, bsc3, peri),
+		[BCM281XX_SLAVE_CCU_PWM] =
+			KONA_CLK(slave, pwm, peri),
+		[BCM281XX_SLAVE_CCU_CLOCK_COUNT] = LAST_KONA_CLK,
+	},
+};
+
+/* Device tree match table callback functions */
+
+static void __init kona_dt_root_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&root_ccu_data, node);
+}
+
+static void __init kona_dt_aon_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&aon_ccu_data, node);
+}
+
+static void __init kona_dt_hub_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&hub_ccu_data, node);
+}
+
+static void __init kona_dt_master_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&master_ccu_data, node);
+}
+
+static void __init kona_dt_slave_ccu_setup(struct device_node *node)
+{
+	kona_dt_ccu_setup(&slave_ccu_data, node);
+}
+
+CLK_OF_DECLARE(bcm281xx_root_ccu, BCM281XX_DT_ROOT_CCU_COMPAT,
+			kona_dt_root_ccu_setup);
+CLK_OF_DECLARE(bcm281xx_aon_ccu, BCM281XX_DT_AON_CCU_COMPAT,
+			kona_dt_aon_ccu_setup);
+CLK_OF_DECLARE(bcm281xx_hub_ccu, BCM281XX_DT_HUB_CCU_COMPAT,
+			kona_dt_hub_ccu_setup);
+CLK_OF_DECLARE(bcm281xx_master_ccu, BCM281XX_DT_MASTER_CCU_COMPAT,
+			kona_dt_master_ccu_setup);
+CLK_OF_DECLARE(bcm281xx_slave_ccu, BCM281XX_DT_SLAVE_CCU_COMPAT,
+			kona_dt_slave_ccu_setup);
diff --git a/drivers/clk/bcm/clk-bcm2835-aux.c b/drivers/clk/bcm/clk-bcm2835-aux.c
new file mode 100644
index 000000000..290a2846a
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2835-aux.c
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Broadcom
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+
+#define BCM2835_AUXIRQ		0x00
+#define BCM2835_AUXENB		0x04
+
+static int bcm2835_aux_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_hw_onecell_data *onecell;
+	const char *parent;
+	struct clk *parent_clk;
+	void __iomem *reg, *gate;
+
+	parent_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(parent_clk))
+		return PTR_ERR(parent_clk);
+	parent = __clk_get_name(parent_clk);
+
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	onecell = devm_kmalloc(dev,
+			       struct_size(onecell, hws,
+					   BCM2835_AUX_CLOCK_COUNT),
+			       GFP_KERNEL);
+	if (!onecell)
+		return -ENOMEM;
+	onecell->num = BCM2835_AUX_CLOCK_COUNT;
+
+	gate = reg + BCM2835_AUXENB;
+	onecell->hws[BCM2835_AUX_CLOCK_UART] =
+		clk_hw_register_gate(dev, "aux_uart", parent, 0, gate, 0, 0, NULL);
+
+	onecell->hws[BCM2835_AUX_CLOCK_SPI1] =
+		clk_hw_register_gate(dev, "aux_spi1", parent, 0, gate, 1, 0, NULL);
+
+	onecell->hws[BCM2835_AUX_CLOCK_SPI2] =
+		clk_hw_register_gate(dev, "aux_spi2", parent, 0, gate, 2, 0, NULL);
+
+	return of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+				      onecell);
+}
+
+static const struct of_device_id bcm2835_aux_clk_of_match[] = {
+	{ .compatible = "brcm,bcm2835-aux", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm2835_aux_clk_of_match);
+
+static struct platform_driver bcm2835_aux_clk_driver = {
+	.driver = {
+		.name = "bcm2835-aux-clk",
+		.of_match_table = bcm2835_aux_clk_of_match,
+	},
+	.probe          = bcm2835_aux_clk_probe,
+};
+builtin_platform_driver(bcm2835_aux_clk_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("BCM2835 auxiliary peripheral clock driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
new file mode 100644
index 000000000..b7f89873f
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -0,0 +1,2324 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2010,2015 Broadcom
+ * Copyright (C) 2012 Stephen Warren
+ */
+
+/**
+ * DOC: BCM2835 CPRMAN (clock manager for the "audio" domain)
+ *
+ * The clock tree on the 2835 has several levels.  There's a root
+ * oscillator running at 19.2Mhz.  After the oscillator there are 5
+ * PLLs, roughly divided as "camera", "ARM", "core", "DSI displays",
+ * and "HDMI displays".  Those 5 PLLs each can divide their output to
+ * produce up to 4 channels.  Finally, there is the level of clocks to
+ * be consumed by other hardware components (like "H264" or "HDMI
+ * state machine"), which divide off of some subset of the PLL
+ * channels.
+ *
+ * All of the clocks in the tree are exposed in the DT, because the DT
+ * may want to make assignments of the final layer of clocks to the
+ * PLL channels, and some components of the hardware will actually
+ * skip layers of the tree (for example, the pixel clock comes
+ * directly from the PLLH PIX channel without using a CM_*CTL clock
+ * generator).
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <dt-bindings/clock/bcm2835.h>
+
+#define CM_PASSWORD		0x5a000000
+
+#define CM_GNRICCTL		0x000
+#define CM_GNRICDIV		0x004
+# define CM_DIV_FRAC_BITS	12
+# define CM_DIV_FRAC_MASK	GENMASK(CM_DIV_FRAC_BITS - 1, 0)
+
+#define CM_VPUCTL		0x008
+#define CM_VPUDIV		0x00c
+#define CM_SYSCTL		0x010
+#define CM_SYSDIV		0x014
+#define CM_PERIACTL		0x018
+#define CM_PERIADIV		0x01c
+#define CM_PERIICTL		0x020
+#define CM_PERIIDIV		0x024
+#define CM_H264CTL		0x028
+#define CM_H264DIV		0x02c
+#define CM_ISPCTL		0x030
+#define CM_ISPDIV		0x034
+#define CM_V3DCTL		0x038
+#define CM_V3DDIV		0x03c
+#define CM_CAM0CTL		0x040
+#define CM_CAM0DIV		0x044
+#define CM_CAM1CTL		0x048
+#define CM_CAM1DIV		0x04c
+#define CM_CCP2CTL		0x050
+#define CM_CCP2DIV		0x054
+#define CM_DSI0ECTL		0x058
+#define CM_DSI0EDIV		0x05c
+#define CM_DSI0PCTL		0x060
+#define CM_DSI0PDIV		0x064
+#define CM_DPICTL		0x068
+#define CM_DPIDIV		0x06c
+#define CM_GP0CTL		0x070
+#define CM_GP0DIV		0x074
+#define CM_GP1CTL		0x078
+#define CM_GP1DIV		0x07c
+#define CM_GP2CTL		0x080
+#define CM_GP2DIV		0x084
+#define CM_HSMCTL		0x088
+#define CM_HSMDIV		0x08c
+#define CM_OTPCTL		0x090
+#define CM_OTPDIV		0x094
+#define CM_PCMCTL		0x098
+#define CM_PCMDIV		0x09c
+#define CM_PWMCTL		0x0a0
+#define CM_PWMDIV		0x0a4
+#define CM_SLIMCTL		0x0a8
+#define CM_SLIMDIV		0x0ac
+#define CM_SMICTL		0x0b0
+#define CM_SMIDIV		0x0b4
+/* no definition for 0x0b8  and 0x0bc */
+#define CM_TCNTCTL		0x0c0
+# define CM_TCNT_SRC1_SHIFT		12
+#define CM_TCNTCNT		0x0c4
+#define CM_TECCTL		0x0c8
+#define CM_TECDIV		0x0cc
+#define CM_TD0CTL		0x0d0
+#define CM_TD0DIV		0x0d4
+#define CM_TD1CTL		0x0d8
+#define CM_TD1DIV		0x0dc
+#define CM_TSENSCTL		0x0e0
+#define CM_TSENSDIV		0x0e4
+#define CM_TIMERCTL		0x0e8
+#define CM_TIMERDIV		0x0ec
+#define CM_UARTCTL		0x0f0
+#define CM_UARTDIV		0x0f4
+#define CM_VECCTL		0x0f8
+#define CM_VECDIV		0x0fc
+#define CM_PULSECTL		0x190
+#define CM_PULSEDIV		0x194
+#define CM_SDCCTL		0x1a8
+#define CM_SDCDIV		0x1ac
+#define CM_ARMCTL		0x1b0
+#define CM_AVEOCTL		0x1b8
+#define CM_AVEODIV		0x1bc
+#define CM_EMMCCTL		0x1c0
+#define CM_EMMCDIV		0x1c4
+#define CM_EMMC2CTL		0x1d0
+#define CM_EMMC2DIV		0x1d4
+
+/* General bits for the CM_*CTL regs */
+# define CM_ENABLE			BIT(4)
+# define CM_KILL			BIT(5)
+# define CM_GATE_BIT			6
+# define CM_GATE			BIT(CM_GATE_BIT)
+# define CM_BUSY			BIT(7)
+# define CM_BUSYD			BIT(8)
+# define CM_FRAC			BIT(9)
+# define CM_SRC_SHIFT			0
+# define CM_SRC_BITS			4
+# define CM_SRC_MASK			0xf
+# define CM_SRC_GND			0
+# define CM_SRC_OSC			1
+# define CM_SRC_TESTDEBUG0		2
+# define CM_SRC_TESTDEBUG1		3
+# define CM_SRC_PLLA_CORE		4
+# define CM_SRC_PLLA_PER		4
+# define CM_SRC_PLLC_CORE0		5
+# define CM_SRC_PLLC_PER		5
+# define CM_SRC_PLLC_CORE1		8
+# define CM_SRC_PLLD_CORE		6
+# define CM_SRC_PLLD_PER		6
+# define CM_SRC_PLLH_AUX		7
+# define CM_SRC_PLLC_CORE1		8
+# define CM_SRC_PLLC_CORE2		9
+
+#define CM_OSCCOUNT		0x100
+
+#define CM_PLLA			0x104
+# define CM_PLL_ANARST			BIT(8)
+# define CM_PLLA_HOLDPER		BIT(7)
+# define CM_PLLA_LOADPER		BIT(6)
+# define CM_PLLA_HOLDCORE		BIT(5)
+# define CM_PLLA_LOADCORE		BIT(4)
+# define CM_PLLA_HOLDCCP2		BIT(3)
+# define CM_PLLA_LOADCCP2		BIT(2)
+# define CM_PLLA_HOLDDSI0		BIT(1)
+# define CM_PLLA_LOADDSI0		BIT(0)
+
+#define CM_PLLC			0x108
+# define CM_PLLC_HOLDPER		BIT(7)
+# define CM_PLLC_LOADPER		BIT(6)
+# define CM_PLLC_HOLDCORE2		BIT(5)
+# define CM_PLLC_LOADCORE2		BIT(4)
+# define CM_PLLC_HOLDCORE1		BIT(3)
+# define CM_PLLC_LOADCORE1		BIT(2)
+# define CM_PLLC_HOLDCORE0		BIT(1)
+# define CM_PLLC_LOADCORE0		BIT(0)
+
+#define CM_PLLD			0x10c
+# define CM_PLLD_HOLDPER		BIT(7)
+# define CM_PLLD_LOADPER		BIT(6)
+# define CM_PLLD_HOLDCORE		BIT(5)
+# define CM_PLLD_LOADCORE		BIT(4)
+# define CM_PLLD_HOLDDSI1		BIT(3)
+# define CM_PLLD_LOADDSI1		BIT(2)
+# define CM_PLLD_HOLDDSI0		BIT(1)
+# define CM_PLLD_LOADDSI0		BIT(0)
+
+#define CM_PLLH			0x110
+# define CM_PLLH_LOADRCAL		BIT(2)
+# define CM_PLLH_LOADAUX		BIT(1)
+# define CM_PLLH_LOADPIX		BIT(0)
+
+#define CM_LOCK			0x114
+# define CM_LOCK_FLOCKH			BIT(12)
+# define CM_LOCK_FLOCKD			BIT(11)
+# define CM_LOCK_FLOCKC			BIT(10)
+# define CM_LOCK_FLOCKB			BIT(9)
+# define CM_LOCK_FLOCKA			BIT(8)
+
+#define CM_EVENT		0x118
+#define CM_DSI1ECTL		0x158
+#define CM_DSI1EDIV		0x15c
+#define CM_DSI1PCTL		0x160
+#define CM_DSI1PDIV		0x164
+#define CM_DFTCTL		0x168
+#define CM_DFTDIV		0x16c
+
+#define CM_PLLB			0x170
+# define CM_PLLB_HOLDARM		BIT(1)
+# define CM_PLLB_LOADARM		BIT(0)
+
+#define A2W_PLLA_CTRL		0x1100
+#define A2W_PLLC_CTRL		0x1120
+#define A2W_PLLD_CTRL		0x1140
+#define A2W_PLLH_CTRL		0x1160
+#define A2W_PLLB_CTRL		0x11e0
+# define A2W_PLL_CTRL_PRST_DISABLE	BIT(17)
+# define A2W_PLL_CTRL_PWRDN		BIT(16)
+# define A2W_PLL_CTRL_PDIV_MASK		0x000007000
+# define A2W_PLL_CTRL_PDIV_SHIFT	12
+# define A2W_PLL_CTRL_NDIV_MASK		0x0000003ff
+# define A2W_PLL_CTRL_NDIV_SHIFT	0
+
+#define A2W_PLLA_ANA0		0x1010
+#define A2W_PLLC_ANA0		0x1030
+#define A2W_PLLD_ANA0		0x1050
+#define A2W_PLLH_ANA0		0x1070
+#define A2W_PLLB_ANA0		0x10f0
+
+#define A2W_PLL_KA_SHIFT	7
+#define A2W_PLL_KA_MASK		GENMASK(9, 7)
+#define A2W_PLL_KI_SHIFT	19
+#define A2W_PLL_KI_MASK		GENMASK(21, 19)
+#define A2W_PLL_KP_SHIFT	15
+#define A2W_PLL_KP_MASK		GENMASK(18, 15)
+
+#define A2W_PLLH_KA_SHIFT	19
+#define A2W_PLLH_KA_MASK	GENMASK(21, 19)
+#define A2W_PLLH_KI_LOW_SHIFT	22
+#define A2W_PLLH_KI_LOW_MASK	GENMASK(23, 22)
+#define A2W_PLLH_KI_HIGH_SHIFT	0
+#define A2W_PLLH_KI_HIGH_MASK	GENMASK(0, 0)
+#define A2W_PLLH_KP_SHIFT	1
+#define A2W_PLLH_KP_MASK	GENMASK(4, 1)
+
+#define A2W_XOSC_CTRL		0x1190
+# define A2W_XOSC_CTRL_PLLB_ENABLE	BIT(7)
+# define A2W_XOSC_CTRL_PLLA_ENABLE	BIT(6)
+# define A2W_XOSC_CTRL_PLLD_ENABLE	BIT(5)
+# define A2W_XOSC_CTRL_DDR_ENABLE	BIT(4)
+# define A2W_XOSC_CTRL_CPR1_ENABLE	BIT(3)
+# define A2W_XOSC_CTRL_USB_ENABLE	BIT(2)
+# define A2W_XOSC_CTRL_HDMI_ENABLE	BIT(1)
+# define A2W_XOSC_CTRL_PLLC_ENABLE	BIT(0)
+
+#define A2W_PLLA_FRAC		0x1200
+#define A2W_PLLC_FRAC		0x1220
+#define A2W_PLLD_FRAC		0x1240
+#define A2W_PLLH_FRAC		0x1260
+#define A2W_PLLB_FRAC		0x12e0
+# define A2W_PLL_FRAC_MASK		((1 << A2W_PLL_FRAC_BITS) - 1)
+# define A2W_PLL_FRAC_BITS		20
+
+#define A2W_PLL_CHANNEL_DISABLE		BIT(8)
+#define A2W_PLL_DIV_BITS		8
+#define A2W_PLL_DIV_SHIFT		0
+
+#define A2W_PLLA_DSI0		0x1300
+#define A2W_PLLA_CORE		0x1400
+#define A2W_PLLA_PER		0x1500
+#define A2W_PLLA_CCP2		0x1600
+
+#define A2W_PLLC_CORE2		0x1320
+#define A2W_PLLC_CORE1		0x1420
+#define A2W_PLLC_PER		0x1520
+#define A2W_PLLC_CORE0		0x1620
+
+#define A2W_PLLD_DSI0		0x1340
+#define A2W_PLLD_CORE		0x1440
+#define A2W_PLLD_PER		0x1540
+#define A2W_PLLD_DSI1		0x1640
+
+#define A2W_PLLH_AUX		0x1360
+#define A2W_PLLH_RCAL		0x1460
+#define A2W_PLLH_PIX		0x1560
+#define A2W_PLLH_STS		0x1660
+
+#define A2W_PLLH_CTRLR		0x1960
+#define A2W_PLLH_FRACR		0x1a60
+#define A2W_PLLH_AUXR		0x1b60
+#define A2W_PLLH_RCALR		0x1c60
+#define A2W_PLLH_PIXR		0x1d60
+#define A2W_PLLH_STSR		0x1e60
+
+#define A2W_PLLB_ARM		0x13e0
+#define A2W_PLLB_SP0		0x14e0
+#define A2W_PLLB_SP1		0x15e0
+#define A2W_PLLB_SP2		0x16e0
+
+#define LOCK_TIMEOUT_NS		100000000
+#define BCM2835_MAX_FB_RATE	1750000000u
+
+#define SOC_BCM2835		BIT(0)
+#define SOC_BCM2711		BIT(1)
+#define SOC_ALL			(SOC_BCM2835 | SOC_BCM2711)
+
+/*
+ * Names of clocks used within the driver that need to be replaced
+ * with an external parent's name.  This array is in the order that
+ * the clocks node in the DT references external clocks.
+ */
+static const char *const cprman_parent_names[] = {
+	"xosc",
+	"dsi0_byte",
+	"dsi0_ddr2",
+	"dsi0_ddr",
+	"dsi1_byte",
+	"dsi1_ddr2",
+	"dsi1_ddr",
+};
+
+struct bcm2835_cprman {
+	struct device *dev;
+	void __iomem *regs;
+	spinlock_t regs_lock; /* spinlock for all clocks */
+	unsigned int soc;
+
+	/*
+	 * Real names of cprman clock parents looked up through
+	 * of_clk_get_parent_name(), which will be used in the
+	 * parent_names[] arrays for clock registration.
+	 */
+	const char *real_parent_names[ARRAY_SIZE(cprman_parent_names)];
+
+	/* Must be last */
+	struct clk_hw_onecell_data onecell;
+};
+
+struct cprman_plat_data {
+	unsigned int soc;
+};
+
+static inline void cprman_write(struct bcm2835_cprman *cprman, u32 reg, u32 val)
+{
+	writel(CM_PASSWORD | val, cprman->regs + reg);
+}
+
+static inline u32 cprman_read(struct bcm2835_cprman *cprman, u32 reg)
+{
+	return readl(cprman->regs + reg);
+}
+
+/* Does a cycle of measuring a clock through the TCNT clock, which may
+ * source from many other clocks in the system.
+ */
+static unsigned long bcm2835_measure_tcnt_mux(struct bcm2835_cprman *cprman,
+					      u32 tcnt_mux)
+{
+	u32 osccount = 19200; /* 1ms */
+	u32 count;
+	ktime_t timeout;
+
+	spin_lock(&cprman->regs_lock);
+
+	cprman_write(cprman, CM_TCNTCTL, CM_KILL);
+
+	cprman_write(cprman, CM_TCNTCTL,
+		     (tcnt_mux & CM_SRC_MASK) |
+		     (tcnt_mux >> CM_SRC_BITS) << CM_TCNT_SRC1_SHIFT);
+
+	cprman_write(cprman, CM_OSCCOUNT, osccount);
+
+	/* do a kind delay at the start */
+	mdelay(1);
+
+	/* Finish off whatever is left of OSCCOUNT */
+	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+	while (cprman_read(cprman, CM_OSCCOUNT)) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "timeout waiting for OSCCOUNT\n");
+			count = 0;
+			goto out;
+		}
+		cpu_relax();
+	}
+
+	/* Wait for BUSY to clear. */
+	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+	while (cprman_read(cprman, CM_TCNTCTL) & CM_BUSY) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "timeout waiting for !BUSY\n");
+			count = 0;
+			goto out;
+		}
+		cpu_relax();
+	}
+
+	count = cprman_read(cprman, CM_TCNTCNT);
+
+	cprman_write(cprman, CM_TCNTCTL, 0);
+
+out:
+	spin_unlock(&cprman->regs_lock);
+
+	return count * 1000;
+}
+
+static void bcm2835_debugfs_regset(struct bcm2835_cprman *cprman, u32 base,
+				   const struct debugfs_reg32 *regs,
+				   size_t nregs, struct dentry *dentry)
+{
+	struct debugfs_regset32 *regset;
+
+	regset = devm_kzalloc(cprman->dev, sizeof(*regset), GFP_KERNEL);
+	if (!regset)
+		return;
+
+	regset->regs = regs;
+	regset->nregs = nregs;
+	regset->base = cprman->regs + base;
+
+	debugfs_create_regset32("regdump", S_IRUGO, dentry, regset);
+}
+
+struct bcm2835_pll_data {
+	const char *name;
+	u32 cm_ctrl_reg;
+	u32 a2w_ctrl_reg;
+	u32 frac_reg;
+	u32 ana_reg_base;
+	u32 reference_enable_mask;
+	/* Bit in CM_LOCK to indicate when the PLL has locked. */
+	u32 lock_mask;
+	u32 flags;
+
+	const struct bcm2835_pll_ana_bits *ana;
+
+	unsigned long min_rate;
+	unsigned long max_rate;
+	/*
+	 * Highest rate for the VCO before we have to use the
+	 * pre-divide-by-2.
+	 */
+	unsigned long max_fb_rate;
+};
+
+struct bcm2835_pll_ana_bits {
+	u32 mask0;
+	u32 set0;
+	u32 mask1;
+	u32 set1;
+	u32 mask3;
+	u32 set3;
+	u32 fb_prediv_mask;
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
+	.mask0 = 0,
+	.set0 = 0,
+	.mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK,
+	.set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
+	.mask3 = A2W_PLL_KA_MASK,
+	.set3 = (2 << A2W_PLL_KA_SHIFT),
+	.fb_prediv_mask = BIT(14),
+};
+
+static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
+	.mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK,
+	.set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
+	.mask1 = A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK,
+	.set1 = (6 << A2W_PLLH_KP_SHIFT),
+	.mask3 = 0,
+	.set3 = 0,
+	.fb_prediv_mask = BIT(11),
+};
+
+struct bcm2835_pll_divider_data {
+	const char *name;
+	const char *source_pll;
+
+	u32 cm_reg;
+	u32 a2w_reg;
+
+	u32 load_mask;
+	u32 hold_mask;
+	u32 fixed_divider;
+	u32 flags;
+};
+
+struct bcm2835_clock_data {
+	const char *name;
+
+	const char *const *parents;
+	int num_mux_parents;
+
+	/* Bitmap encoding which parents accept rate change propagation. */
+	unsigned int set_rate_parent;
+
+	u32 ctl_reg;
+	u32 div_reg;
+
+	/* Number of integer bits in the divider */
+	u32 int_bits;
+	/* Number of fractional bits in the divider */
+	u32 frac_bits;
+
+	u32 flags;
+
+	bool is_vpu_clock;
+	bool is_mash_clock;
+	bool low_jitter;
+
+	u32 tcnt_mux;
+};
+
+struct bcm2835_gate_data {
+	const char *name;
+	const char *parent;
+
+	u32 ctl_reg;
+};
+
+struct bcm2835_pll {
+	struct clk_hw hw;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_pll_data *data;
+};
+
+static int bcm2835_pll_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+
+	return cprman_read(cprman, data->a2w_ctrl_reg) &
+		A2W_PLL_CTRL_PRST_DISABLE;
+}
+
+static u32 bcm2835_pll_get_prediv_mask(struct bcm2835_cprman *cprman,
+				       const struct bcm2835_pll_data *data)
+{
+	/*
+	 * On BCM2711 there isn't a pre-divisor available in the PLL feedback
+	 * loop. Bits 13:14 of ANA1 (PLLA,PLLB,PLLC,PLLD) have been re-purposed
+	 * for to for VCO RANGE bits.
+	 */
+	if (cprman->soc & SOC_BCM2711)
+		return 0;
+
+	return data->ana->fb_prediv_mask;
+}
+
+static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate,
+					     unsigned long parent_rate,
+					     u32 *ndiv, u32 *fdiv)
+{
+	u64 div;
+
+	div = (u64)rate << A2W_PLL_FRAC_BITS;
+	do_div(div, parent_rate);
+
+	*ndiv = div >> A2W_PLL_FRAC_BITS;
+	*fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1);
+}
+
+static long bcm2835_pll_rate_from_divisors(unsigned long parent_rate,
+					   u32 ndiv, u32 fdiv, u32 pdiv)
+{
+	u64 rate;
+
+	if (pdiv == 0)
+		return 0;
+
+	rate = (u64)parent_rate * ((ndiv << A2W_PLL_FRAC_BITS) + fdiv);
+	do_div(rate, pdiv);
+	return rate >> A2W_PLL_FRAC_BITS;
+}
+
+static long bcm2835_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	const struct bcm2835_pll_data *data = pll->data;
+	u32 ndiv, fdiv;
+
+	rate = clamp(rate, data->min_rate, data->max_rate);
+
+	bcm2835_pll_choose_ndiv_and_fdiv(rate, *parent_rate, &ndiv, &fdiv);
+
+	return bcm2835_pll_rate_from_divisors(*parent_rate, ndiv, fdiv, 1);
+}
+
+static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	u32 a2wctrl = cprman_read(cprman, data->a2w_ctrl_reg);
+	u32 ndiv, pdiv, fdiv;
+	bool using_prediv;
+
+	if (parent_rate == 0)
+		return 0;
+
+	fdiv = cprman_read(cprman, data->frac_reg) & A2W_PLL_FRAC_MASK;
+	ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT;
+	pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT;
+	using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &
+		       bcm2835_pll_get_prediv_mask(cprman, data);
+
+	if (using_prediv) {
+		ndiv *= 2;
+		fdiv *= 2;
+	}
+
+	return bcm2835_pll_rate_from_divisors(parent_rate, ndiv, fdiv, pdiv);
+}
+
+static void bcm2835_pll_off(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->cm_ctrl_reg, CM_PLL_ANARST);
+	cprman_write(cprman, data->a2w_ctrl_reg,
+		     cprman_read(cprman, data->a2w_ctrl_reg) |
+		     A2W_PLL_CTRL_PWRDN);
+	spin_unlock(&cprman->regs_lock);
+}
+
+static int bcm2835_pll_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	ktime_t timeout;
+
+	cprman_write(cprman, data->a2w_ctrl_reg,
+		     cprman_read(cprman, data->a2w_ctrl_reg) &
+		     ~A2W_PLL_CTRL_PWRDN);
+
+	/* Take the PLL out of reset. */
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->cm_ctrl_reg,
+		     cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
+	spin_unlock(&cprman->regs_lock);
+
+	/* Wait for the PLL to lock. */
+	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+	while (!(cprman_read(cprman, CM_LOCK) & data->lock_mask)) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+				clk_hw_get_name(hw));
+			return -ETIMEDOUT;
+		}
+
+		cpu_relax();
+	}
+
+	cprman_write(cprman, data->a2w_ctrl_reg,
+		     cprman_read(cprman, data->a2w_ctrl_reg) |
+		     A2W_PLL_CTRL_PRST_DISABLE);
+
+	return 0;
+}
+
+static void
+bcm2835_pll_write_ana(struct bcm2835_cprman *cprman, u32 ana_reg_base, u32 *ana)
+{
+	int i;
+
+	/*
+	 * ANA register setup is done as a series of writes to
+	 * ANA3-ANA0, in that order.  This lets us write all 4
+	 * registers as a single cycle of the serdes interface (taking
+	 * 100 xosc clocks), whereas if we were to update ana0, 1, and
+	 * 3 individually through their partial-write registers, each
+	 * would be their own serdes cycle.
+	 */
+	for (i = 3; i >= 0; i--)
+		cprman_write(cprman, ana_reg_base + i * 4, ana[i]);
+}
+
+static int bcm2835_pll_set_rate(struct clk_hw *hw,
+				unsigned long rate, unsigned long parent_rate)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	u32 prediv_mask = bcm2835_pll_get_prediv_mask(cprman, data);
+	bool was_using_prediv, use_fb_prediv, do_ana_setup_first;
+	u32 ndiv, fdiv, a2w_ctl;
+	u32 ana[4];
+	int i;
+
+	if (rate > data->max_fb_rate) {
+		use_fb_prediv = true;
+		rate /= 2;
+	} else {
+		use_fb_prediv = false;
+	}
+
+	bcm2835_pll_choose_ndiv_and_fdiv(rate, parent_rate, &ndiv, &fdiv);
+
+	for (i = 3; i >= 0; i--)
+		ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);
+
+	was_using_prediv = ana[1] & prediv_mask;
+
+	ana[0] &= ~data->ana->mask0;
+	ana[0] |= data->ana->set0;
+	ana[1] &= ~data->ana->mask1;
+	ana[1] |= data->ana->set1;
+	ana[3] &= ~data->ana->mask3;
+	ana[3] |= data->ana->set3;
+
+	if (was_using_prediv && !use_fb_prediv) {
+		ana[1] &= ~prediv_mask;
+		do_ana_setup_first = true;
+	} else if (!was_using_prediv && use_fb_prediv) {
+		ana[1] |= prediv_mask;
+		do_ana_setup_first = false;
+	} else {
+		do_ana_setup_first = true;
+	}
+
+	/* Unmask the reference clock from the oscillator. */
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, A2W_XOSC_CTRL,
+		     cprman_read(cprman, A2W_XOSC_CTRL) |
+		     data->reference_enable_mask);
+	spin_unlock(&cprman->regs_lock);
+
+	if (do_ana_setup_first)
+		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+	/* Set the PLL multiplier from the oscillator. */
+	cprman_write(cprman, data->frac_reg, fdiv);
+
+	a2w_ctl = cprman_read(cprman, data->a2w_ctrl_reg);
+	a2w_ctl &= ~A2W_PLL_CTRL_NDIV_MASK;
+	a2w_ctl |= ndiv << A2W_PLL_CTRL_NDIV_SHIFT;
+	a2w_ctl &= ~A2W_PLL_CTRL_PDIV_MASK;
+	a2w_ctl |= 1 << A2W_PLL_CTRL_PDIV_SHIFT;
+	cprman_write(cprman, data->a2w_ctrl_reg, a2w_ctl);
+
+	if (!do_ana_setup_first)
+		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);
+
+	return 0;
+}
+
+static void bcm2835_pll_debug_init(struct clk_hw *hw,
+				  struct dentry *dentry)
+{
+	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
+	struct bcm2835_cprman *cprman = pll->cprman;
+	const struct bcm2835_pll_data *data = pll->data;
+	struct debugfs_reg32 *regs;
+
+	regs = devm_kcalloc(cprman->dev, 7, sizeof(*regs), GFP_KERNEL);
+	if (!regs)
+		return;
+
+	regs[0].name = "cm_ctrl";
+	regs[0].offset = data->cm_ctrl_reg;
+	regs[1].name = "a2w_ctrl";
+	regs[1].offset = data->a2w_ctrl_reg;
+	regs[2].name = "frac";
+	regs[2].offset = data->frac_reg;
+	regs[3].name = "ana0";
+	regs[3].offset = data->ana_reg_base + 0 * 4;
+	regs[4].name = "ana1";
+	regs[4].offset = data->ana_reg_base + 1 * 4;
+	regs[5].name = "ana2";
+	regs[5].offset = data->ana_reg_base + 2 * 4;
+	regs[6].name = "ana3";
+	regs[6].offset = data->ana_reg_base + 3 * 4;
+
+	bcm2835_debugfs_regset(cprman, 0, regs, 7, dentry);
+}
+
+static const struct clk_ops bcm2835_pll_clk_ops = {
+	.is_prepared = bcm2835_pll_is_on,
+	.prepare = bcm2835_pll_on,
+	.unprepare = bcm2835_pll_off,
+	.recalc_rate = bcm2835_pll_get_rate,
+	.set_rate = bcm2835_pll_set_rate,
+	.round_rate = bcm2835_pll_round_rate,
+	.debug_init = bcm2835_pll_debug_init,
+};
+
+struct bcm2835_pll_divider {
+	struct clk_divider div;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_pll_divider_data *data;
+};
+
+static struct bcm2835_pll_divider *
+bcm2835_pll_divider_from_hw(struct clk_hw *hw)
+{
+	return container_of(hw, struct bcm2835_pll_divider, div.hw);
+}
+
+static int bcm2835_pll_divider_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	return !(cprman_read(cprman, data->a2w_reg) & A2W_PLL_CHANNEL_DISABLE);
+}
+
+static long bcm2835_pll_divider_round_rate(struct clk_hw *hw,
+					   unsigned long rate,
+					   unsigned long *parent_rate)
+{
+	return clk_divider_ops.round_rate(hw, rate, parent_rate);
+}
+
+static unsigned long bcm2835_pll_divider_get_rate(struct clk_hw *hw,
+						  unsigned long parent_rate)
+{
+	return clk_divider_ops.recalc_rate(hw, parent_rate);
+}
+
+static void bcm2835_pll_divider_off(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->cm_reg,
+		     (cprman_read(cprman, data->cm_reg) &
+		      ~data->load_mask) | data->hold_mask);
+	cprman_write(cprman, data->a2w_reg,
+		     cprman_read(cprman, data->a2w_reg) |
+		     A2W_PLL_CHANNEL_DISABLE);
+	spin_unlock(&cprman->regs_lock);
+}
+
+static int bcm2835_pll_divider_on(struct clk_hw *hw)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->a2w_reg,
+		     cprman_read(cprman, data->a2w_reg) &
+		     ~A2W_PLL_CHANNEL_DISABLE);
+
+	cprman_write(cprman, data->cm_reg,
+		     cprman_read(cprman, data->cm_reg) & ~data->hold_mask);
+	spin_unlock(&cprman->regs_lock);
+
+	return 0;
+}
+
+static int bcm2835_pll_divider_set_rate(struct clk_hw *hw,
+					unsigned long rate,
+					unsigned long parent_rate)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+	u32 cm, div, max_div = 1 << A2W_PLL_DIV_BITS;
+
+	div = DIV_ROUND_UP_ULL(parent_rate, rate);
+
+	div = min(div, max_div);
+	if (div == max_div)
+		div = 0;
+
+	cprman_write(cprman, data->a2w_reg, div);
+	cm = cprman_read(cprman, data->cm_reg);
+	cprman_write(cprman, data->cm_reg, cm | data->load_mask);
+	cprman_write(cprman, data->cm_reg, cm & ~data->load_mask);
+
+	return 0;
+}
+
+static void bcm2835_pll_divider_debug_init(struct clk_hw *hw,
+					   struct dentry *dentry)
+{
+	struct bcm2835_pll_divider *divider = bcm2835_pll_divider_from_hw(hw);
+	struct bcm2835_cprman *cprman = divider->cprman;
+	const struct bcm2835_pll_divider_data *data = divider->data;
+	struct debugfs_reg32 *regs;
+
+	regs = devm_kcalloc(cprman->dev, 7, sizeof(*regs), GFP_KERNEL);
+	if (!regs)
+		return;
+
+	regs[0].name = "cm";
+	regs[0].offset = data->cm_reg;
+	regs[1].name = "a2w";
+	regs[1].offset = data->a2w_reg;
+
+	bcm2835_debugfs_regset(cprman, 0, regs, 2, dentry);
+}
+
+static const struct clk_ops bcm2835_pll_divider_clk_ops = {
+	.is_prepared = bcm2835_pll_divider_is_on,
+	.prepare = bcm2835_pll_divider_on,
+	.unprepare = bcm2835_pll_divider_off,
+	.recalc_rate = bcm2835_pll_divider_get_rate,
+	.set_rate = bcm2835_pll_divider_set_rate,
+	.round_rate = bcm2835_pll_divider_round_rate,
+	.debug_init = bcm2835_pll_divider_debug_init,
+};
+
+/*
+ * The CM dividers do fixed-point division, so we can't use the
+ * generic integer divider code like the PLL dividers do (and we can't
+ * fake it by having some fixed shifts preceding it in the clock tree,
+ * because we'd run out of bits in a 32-bit unsigned long).
+ */
+struct bcm2835_clock {
+	struct clk_hw hw;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_clock_data *data;
+};
+
+static struct bcm2835_clock *bcm2835_clock_from_hw(struct clk_hw *hw)
+{
+	return container_of(hw, struct bcm2835_clock, hw);
+}
+
+static int bcm2835_clock_is_on(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	return (cprman_read(cprman, data->ctl_reg) & CM_ENABLE) != 0;
+}
+
+static u32 bcm2835_clock_choose_div(struct clk_hw *hw,
+				    unsigned long rate,
+				    unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 unused_frac_mask =
+		GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1;
+	u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS;
+	u64 rem;
+	u32 div, mindiv, maxdiv;
+
+	rem = do_div(temp, rate);
+	div = temp;
+	div &= ~unused_frac_mask;
+
+	/* different clamping limits apply for a mash clock */
+	if (data->is_mash_clock) {
+		/* clamp to min divider of 2 */
+		mindiv = 2 << CM_DIV_FRAC_BITS;
+		/* clamp to the highest possible integer divider */
+		maxdiv = (BIT(data->int_bits) - 1) << CM_DIV_FRAC_BITS;
+	} else {
+		/* clamp to min divider of 1 */
+		mindiv = 1 << CM_DIV_FRAC_BITS;
+		/* clamp to the highest possible fractional divider */
+		maxdiv = GENMASK(data->int_bits + CM_DIV_FRAC_BITS - 1,
+				 CM_DIV_FRAC_BITS - data->frac_bits);
+	}
+
+	/* apply the clamping  limits */
+	div = max_t(u32, div, mindiv);
+	div = min_t(u32, div, maxdiv);
+
+	return div;
+}
+
+static unsigned long bcm2835_clock_rate_from_divisor(struct bcm2835_clock *clock,
+						     unsigned long parent_rate,
+						     u32 div)
+{
+	const struct bcm2835_clock_data *data = clock->data;
+	u64 temp;
+
+	if (data->int_bits == 0 && data->frac_bits == 0)
+		return parent_rate;
+
+	/*
+	 * The divisor is a 12.12 fixed point field, but only some of
+	 * the bits are populated in any given clock.
+	 */
+	div >>= CM_DIV_FRAC_BITS - data->frac_bits;
+	div &= (1 << (data->int_bits + data->frac_bits)) - 1;
+
+	if (div == 0)
+		return 0;
+
+	temp = (u64)parent_rate << data->frac_bits;
+
+	do_div(temp, div);
+
+	return temp;
+}
+
+static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 div;
+
+	if (data->int_bits == 0 && data->frac_bits == 0)
+		return parent_rate;
+
+	div = cprman_read(cprman, data->div_reg);
+
+	return bcm2835_clock_rate_from_divisor(clock, parent_rate, div);
+}
+
+static void bcm2835_clock_wait_busy(struct bcm2835_clock *clock)
+{
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	ktime_t timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
+
+	while (cprman_read(cprman, data->ctl_reg) & CM_BUSY) {
+		if (ktime_after(ktime_get(), timeout)) {
+			dev_err(cprman->dev, "%s: couldn't lock PLL\n",
+				clk_hw_get_name(&clock->hw));
+			return;
+		}
+		cpu_relax();
+	}
+}
+
+static void bcm2835_clock_off(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->ctl_reg,
+		     cprman_read(cprman, data->ctl_reg) & ~CM_ENABLE);
+	spin_unlock(&cprman->regs_lock);
+
+	/* BUSY will remain high until the divider completes its cycle. */
+	bcm2835_clock_wait_busy(clock);
+}
+
+static int bcm2835_clock_on(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	spin_lock(&cprman->regs_lock);
+	cprman_write(cprman, data->ctl_reg,
+		     cprman_read(cprman, data->ctl_reg) |
+		     CM_ENABLE |
+		     CM_GATE);
+	spin_unlock(&cprman->regs_lock);
+
+	/* Debug code to measure the clock once it's turned on to see
+	 * if it's ticking at the rate we expect.
+	 */
+	if (data->tcnt_mux && false) {
+		dev_info(cprman->dev,
+			 "clk %s: rate %ld, measure %ld\n",
+			 data->name,
+			 clk_hw_get_rate(hw),
+			 bcm2835_measure_tcnt_mux(cprman, data->tcnt_mux));
+	}
+
+	return 0;
+}
+
+static int bcm2835_clock_set_rate(struct clk_hw *hw,
+				  unsigned long rate, unsigned long parent_rate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate);
+	u32 ctl;
+
+	spin_lock(&cprman->regs_lock);
+
+	/*
+	 * Setting up frac support
+	 *
+	 * In principle it is recommended to stop/start the clock first,
+	 * but as we set CLK_SET_RATE_GATE during registration of the
+	 * clock this requirement should be take care of by the
+	 * clk-framework.
+	 */
+	ctl = cprman_read(cprman, data->ctl_reg) & ~CM_FRAC;
+	ctl |= (div & CM_DIV_FRAC_MASK) ? CM_FRAC : 0;
+	cprman_write(cprman, data->ctl_reg, ctl);
+
+	cprman_write(cprman, data->div_reg, div);
+
+	spin_unlock(&cprman->regs_lock);
+
+	return 0;
+}
+
+static bool
+bcm2835_clk_is_pllc(struct clk_hw *hw)
+{
+	if (!hw)
+		return false;
+
+	return strncmp(clk_hw_get_name(hw), "pllc", 4) == 0;
+}
+
+static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw,
+							int parent_idx,
+							unsigned long rate,
+							u32 *div,
+							unsigned long *prate,
+							unsigned long *avgrate)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	unsigned long best_rate = 0;
+	u32 curdiv, mindiv, maxdiv;
+	struct clk_hw *parent;
+
+	parent = clk_hw_get_parent_by_index(hw, parent_idx);
+
+	if (!(BIT(parent_idx) & data->set_rate_parent)) {
+		*prate = clk_hw_get_rate(parent);
+		*div = bcm2835_clock_choose_div(hw, rate, *prate);
+
+		*avgrate = bcm2835_clock_rate_from_divisor(clock, *prate, *div);
+
+		if (data->low_jitter && (*div & CM_DIV_FRAC_MASK)) {
+			unsigned long high, low;
+			u32 int_div = *div & ~CM_DIV_FRAC_MASK;
+
+			high = bcm2835_clock_rate_from_divisor(clock, *prate,
+							       int_div);
+			int_div += CM_DIV_FRAC_MASK + 1;
+			low = bcm2835_clock_rate_from_divisor(clock, *prate,
+							      int_div);
+
+			/*
+			 * Return a value which is the maximum deviation
+			 * below the ideal rate, for use as a metric.
+			 */
+			return *avgrate - max(*avgrate - low, high - *avgrate);
+		}
+		return *avgrate;
+	}
+
+	if (data->frac_bits)
+		dev_warn(cprman->dev,
+			"frac bits are not used when propagating rate change");
+
+	/* clamp to min divider of 2 if we're dealing with a mash clock */
+	mindiv = data->is_mash_clock ? 2 : 1;
+	maxdiv = BIT(data->int_bits) - 1;
+
+	/* TODO: Be smart, and only test a subset of the available divisors. */
+	for (curdiv = mindiv; curdiv <= maxdiv; curdiv++) {
+		unsigned long tmp_rate;
+
+		tmp_rate = clk_hw_round_rate(parent, rate * curdiv);
+		tmp_rate /= curdiv;
+		if (curdiv == mindiv ||
+		    (tmp_rate > best_rate && tmp_rate <= rate))
+			best_rate = tmp_rate;
+
+		if (best_rate == rate)
+			break;
+	}
+
+	*div = curdiv << CM_DIV_FRAC_BITS;
+	*prate = curdiv * best_rate;
+	*avgrate = best_rate;
+
+	return best_rate;
+}
+
+static int bcm2835_clock_determine_rate(struct clk_hw *hw,
+					struct clk_rate_request *req)
+{
+	struct clk_hw *parent, *best_parent = NULL;
+	bool current_parent_is_pllc;
+	unsigned long rate, best_rate = 0;
+	unsigned long prate, best_prate = 0;
+	unsigned long avgrate, best_avgrate = 0;
+	size_t i;
+	u32 div;
+
+	current_parent_is_pllc = bcm2835_clk_is_pllc(clk_hw_get_parent(hw));
+
+	/*
+	 * Select parent clock that results in the closest but lower rate
+	 */
+	for (i = 0; i < clk_hw_get_num_parents(hw); ++i) {
+		parent = clk_hw_get_parent_by_index(hw, i);
+		if (!parent)
+			continue;
+
+		/*
+		 * Don't choose a PLLC-derived clock as our parent
+		 * unless it had been manually set that way.  PLLC's
+		 * frequency gets adjusted by the firmware due to
+		 * over-temp or under-voltage conditions, without
+		 * prior notification to our clock consumer.
+		 */
+		if (bcm2835_clk_is_pllc(parent) && !current_parent_is_pllc)
+			continue;
+
+		rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate,
+							  &div, &prate,
+							  &avgrate);
+		if (abs(req->rate - rate) < abs(req->rate - best_rate)) {
+			best_parent = parent;
+			best_prate = prate;
+			best_rate = rate;
+			best_avgrate = avgrate;
+		}
+	}
+
+	if (!best_parent)
+		return -EINVAL;
+
+	req->best_parent_hw = best_parent;
+	req->best_parent_rate = best_prate;
+
+	req->rate = best_avgrate;
+
+	return 0;
+}
+
+static int bcm2835_clock_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u8 src = (index << CM_SRC_SHIFT) & CM_SRC_MASK;
+
+	cprman_write(cprman, data->ctl_reg, src);
+	return 0;
+}
+
+static u8 bcm2835_clock_get_parent(struct clk_hw *hw)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+	u32 src = cprman_read(cprman, data->ctl_reg);
+
+	return (src & CM_SRC_MASK) >> CM_SRC_SHIFT;
+}
+
+static const struct debugfs_reg32 bcm2835_debugfs_clock_reg32[] = {
+	{
+		.name = "ctl",
+		.offset = 0,
+	},
+	{
+		.name = "div",
+		.offset = 4,
+	},
+};
+
+static void bcm2835_clock_debug_init(struct clk_hw *hw,
+				    struct dentry *dentry)
+{
+	struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw);
+	struct bcm2835_cprman *cprman = clock->cprman;
+	const struct bcm2835_clock_data *data = clock->data;
+
+	bcm2835_debugfs_regset(cprman, data->ctl_reg,
+		bcm2835_debugfs_clock_reg32,
+		ARRAY_SIZE(bcm2835_debugfs_clock_reg32),
+		dentry);
+}
+
+static const struct clk_ops bcm2835_clock_clk_ops = {
+	.is_prepared = bcm2835_clock_is_on,
+	.prepare = bcm2835_clock_on,
+	.unprepare = bcm2835_clock_off,
+	.recalc_rate = bcm2835_clock_get_rate,
+	.set_rate = bcm2835_clock_set_rate,
+	.determine_rate = bcm2835_clock_determine_rate,
+	.set_parent = bcm2835_clock_set_parent,
+	.get_parent = bcm2835_clock_get_parent,
+	.debug_init = bcm2835_clock_debug_init,
+};
+
+static int bcm2835_vpu_clock_is_on(struct clk_hw *hw)
+{
+	return true;
+}
+
+/*
+ * The VPU clock can never be disabled (it doesn't have an ENABLE
+ * bit), so it gets its own set of clock ops.
+ */
+static const struct clk_ops bcm2835_vpu_clock_clk_ops = {
+	.is_prepared = bcm2835_vpu_clock_is_on,
+	.recalc_rate = bcm2835_clock_get_rate,
+	.set_rate = bcm2835_clock_set_rate,
+	.determine_rate = bcm2835_clock_determine_rate,
+	.set_parent = bcm2835_clock_set_parent,
+	.get_parent = bcm2835_clock_get_parent,
+	.debug_init = bcm2835_clock_debug_init,
+};
+
+static struct clk_hw *bcm2835_register_pll(struct bcm2835_cprman *cprman,
+					   const void *data)
+{
+	const struct bcm2835_pll_data *pll_data = data;
+	struct bcm2835_pll *pll;
+	struct clk_init_data init;
+	int ret;
+
+	memset(&init, 0, sizeof(init));
+
+	/* All of the PLLs derive from the external oscillator. */
+	init.parent_names = &cprman->real_parent_names[0];
+	init.num_parents = 1;
+	init.name = pll_data->name;
+	init.ops = &bcm2835_pll_clk_ops;
+	init.flags = pll_data->flags | CLK_IGNORE_UNUSED;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return NULL;
+
+	pll->cprman = cprman;
+	pll->data = pll_data;
+	pll->hw.init = &init;
+
+	ret = devm_clk_hw_register(cprman->dev, &pll->hw);
+	if (ret) {
+		kfree(pll);
+		return NULL;
+	}
+	return &pll->hw;
+}
+
+static struct clk_hw *
+bcm2835_register_pll_divider(struct bcm2835_cprman *cprman,
+			     const void *data)
+{
+	const struct bcm2835_pll_divider_data *divider_data = data;
+	struct bcm2835_pll_divider *divider;
+	struct clk_init_data init;
+	const char *divider_name;
+	int ret;
+
+	if (divider_data->fixed_divider != 1) {
+		divider_name = devm_kasprintf(cprman->dev, GFP_KERNEL,
+					      "%s_prediv", divider_data->name);
+		if (!divider_name)
+			return NULL;
+	} else {
+		divider_name = divider_data->name;
+	}
+
+	memset(&init, 0, sizeof(init));
+
+	init.parent_names = &divider_data->source_pll;
+	init.num_parents = 1;
+	init.name = divider_name;
+	init.ops = &bcm2835_pll_divider_clk_ops;
+	init.flags = divider_data->flags | CLK_IGNORE_UNUSED;
+
+	divider = devm_kzalloc(cprman->dev, sizeof(*divider), GFP_KERNEL);
+	if (!divider)
+		return NULL;
+
+	divider->div.reg = cprman->regs + divider_data->a2w_reg;
+	divider->div.shift = A2W_PLL_DIV_SHIFT;
+	divider->div.width = A2W_PLL_DIV_BITS;
+	divider->div.flags = CLK_DIVIDER_MAX_AT_ZERO;
+	divider->div.lock = &cprman->regs_lock;
+	divider->div.hw.init = &init;
+	divider->div.table = NULL;
+
+	divider->cprman = cprman;
+	divider->data = divider_data;
+
+	ret = devm_clk_hw_register(cprman->dev, &divider->div.hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	/*
+	 * PLLH's channels have a fixed divide by 10 afterwards, which
+	 * is what our consumers are actually using.
+	 */
+	if (divider_data->fixed_divider != 1) {
+		return clk_hw_register_fixed_factor(cprman->dev,
+						    divider_data->name,
+						    divider_name,
+						    CLK_SET_RATE_PARENT,
+						    1,
+						    divider_data->fixed_divider);
+	}
+
+	return &divider->div.hw;
+}
+
+static struct clk_hw *bcm2835_register_clock(struct bcm2835_cprman *cprman,
+					     const void *data)
+{
+	const struct bcm2835_clock_data *clock_data = data;
+	struct bcm2835_clock *clock;
+	struct clk_init_data init;
+	const char *parents[1 << CM_SRC_BITS];
+	size_t i;
+	int ret;
+
+	/*
+	 * Replace our strings referencing parent clocks with the
+	 * actual clock-output-name of the parent.
+	 */
+	for (i = 0; i < clock_data->num_mux_parents; i++) {
+		parents[i] = clock_data->parents[i];
+
+		ret = match_string(cprman_parent_names,
+				   ARRAY_SIZE(cprman_parent_names),
+				   parents[i]);
+		if (ret >= 0)
+			parents[i] = cprman->real_parent_names[ret];
+	}
+
+	memset(&init, 0, sizeof(init));
+	init.parent_names = parents;
+	init.num_parents = clock_data->num_mux_parents;
+	init.name = clock_data->name;
+	init.flags = clock_data->flags | CLK_IGNORE_UNUSED;
+
+	/*
+	 * Pass the CLK_SET_RATE_PARENT flag if we are allowed to propagate
+	 * rate changes on at least of the parents.
+	 */
+	if (clock_data->set_rate_parent)
+		init.flags |= CLK_SET_RATE_PARENT;
+
+	if (clock_data->is_vpu_clock) {
+		init.ops = &bcm2835_vpu_clock_clk_ops;
+	} else {
+		init.ops = &bcm2835_clock_clk_ops;
+		init.flags |= CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE;
+
+		/* If the clock wasn't actually enabled at boot, it's not
+		 * critical.
+		 */
+		if (!(cprman_read(cprman, clock_data->ctl_reg) & CM_ENABLE))
+			init.flags &= ~CLK_IS_CRITICAL;
+	}
+
+	clock = devm_kzalloc(cprman->dev, sizeof(*clock), GFP_KERNEL);
+	if (!clock)
+		return NULL;
+
+	clock->cprman = cprman;
+	clock->data = clock_data;
+	clock->hw.init = &init;
+
+	ret = devm_clk_hw_register(cprman->dev, &clock->hw);
+	if (ret)
+		return ERR_PTR(ret);
+	return &clock->hw;
+}
+
+static struct clk_hw *bcm2835_register_gate(struct bcm2835_cprman *cprman,
+					    const void *data)
+{
+	const struct bcm2835_gate_data *gate_data = data;
+
+	return clk_hw_register_gate(cprman->dev, gate_data->name,
+				    gate_data->parent,
+				    CLK_IGNORE_UNUSED | CLK_SET_RATE_GATE,
+				    cprman->regs + gate_data->ctl_reg,
+				    CM_GATE_BIT, 0, &cprman->regs_lock);
+}
+
+struct bcm2835_clk_desc {
+	struct clk_hw *(*clk_register)(struct bcm2835_cprman *cprman,
+				       const void *data);
+	unsigned int supported;
+	const void *data;
+};
+
+/* assignment helper macros for different clock types */
+#define _REGISTER(f, s, ...) { .clk_register = f, \
+			       .supported = s,				\
+			       .data = __VA_ARGS__ }
+#define REGISTER_PLL(s, ...)	_REGISTER(&bcm2835_register_pll,	\
+					  s,				\
+					  &(struct bcm2835_pll_data)	\
+					  {__VA_ARGS__})
+#define REGISTER_PLL_DIV(s, ...) _REGISTER(&bcm2835_register_pll_divider, \
+					   s,				  \
+					   &(struct bcm2835_pll_divider_data) \
+					   {__VA_ARGS__})
+#define REGISTER_CLK(s, ...)	_REGISTER(&bcm2835_register_clock,	\
+					  s,				\
+					  &(struct bcm2835_clock_data)	\
+					  {__VA_ARGS__})
+#define REGISTER_GATE(s, ...)	_REGISTER(&bcm2835_register_gate,	\
+					  s,				\
+					  &(struct bcm2835_gate_data)	\
+					  {__VA_ARGS__})
+
+/* parent mux arrays plus helper macros */
+
+/* main oscillator parent mux */
+static const char *const bcm2835_clock_osc_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1"
+};
+
+#define REGISTER_OSC_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_osc_parents),	\
+	.parents = bcm2835_clock_osc_parents,				\
+	__VA_ARGS__)
+
+/* main peripherial parent mux */
+static const char *const bcm2835_clock_per_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"plla_per",
+	"pllc_per",
+	"plld_per",
+	"pllh_aux",
+};
+
+#define REGISTER_PER_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_per_parents),	\
+	.parents = bcm2835_clock_per_parents,				\
+	__VA_ARGS__)
+
+/*
+ * Restrict clock sources for the PCM peripheral to the oscillator and
+ * PLLD_PER because other source may have varying rates or be switched
+ * off.
+ *
+ * Prevent other sources from being selected by replacing their names in
+ * the list of potential parents with dummy entries (entry index is
+ * significant).
+ */
+static const char *const bcm2835_pcm_per_parents[] = {
+	"-",
+	"xosc",
+	"-",
+	"-",
+	"-",
+	"-",
+	"plld_per",
+	"-",
+};
+
+#define REGISTER_PCM_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_pcm_per_parents),		\
+	.parents = bcm2835_pcm_per_parents,				\
+	__VA_ARGS__)
+
+/* main vpu parent mux */
+static const char *const bcm2835_clock_vpu_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"plla_core",
+	"pllc_core0",
+	"plld_core",
+	"pllh_aux",
+	"pllc_core1",
+	"pllc_core2",
+};
+
+#define REGISTER_VPU_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_vpu_parents),	\
+	.parents = bcm2835_clock_vpu_parents,				\
+	__VA_ARGS__)
+
+/*
+ * DSI parent clocks.  The DSI byte/DDR/DDR2 clocks come from the DSI
+ * analog PHY.  The _inv variants are generated internally to cprman,
+ * but we don't use them so they aren't hooked up.
+ */
+static const char *const bcm2835_clock_dsi0_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"dsi0_ddr",
+	"dsi0_ddr_inv",
+	"dsi0_ddr2",
+	"dsi0_ddr2_inv",
+	"dsi0_byte",
+	"dsi0_byte_inv",
+};
+
+static const char *const bcm2835_clock_dsi1_parents[] = {
+	"gnd",
+	"xosc",
+	"testdebug0",
+	"testdebug1",
+	"dsi1_ddr",
+	"dsi1_ddr_inv",
+	"dsi1_ddr2",
+	"dsi1_ddr2_inv",
+	"dsi1_byte",
+	"dsi1_byte_inv",
+};
+
+#define REGISTER_DSI0_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi0_parents),	\
+	.parents = bcm2835_clock_dsi0_parents,				\
+	__VA_ARGS__)
+
+#define REGISTER_DSI1_CLK(s, ...)	REGISTER_CLK(			\
+	s,								\
+	.num_mux_parents = ARRAY_SIZE(bcm2835_clock_dsi1_parents),	\
+	.parents = bcm2835_clock_dsi1_parents,				\
+	__VA_ARGS__)
+
+/*
+ * the real definition of all the pll, pll_dividers and clocks
+ * these make use of the above REGISTER_* macros
+ */
+static const struct bcm2835_clk_desc clk_desc_array[] = {
+	/* the PLL + PLL dividers */
+
+	/*
+	 * PLLA is the auxiliary PLL, used to drive the CCP2
+	 * (Compact Camera Port 2) transmitter clock.
+	 *
+	 * It is in the PX LDO power domain, which is on when the
+	 * AUDIO domain is on.
+	 */
+	[BCM2835_PLLA]		= REGISTER_PLL(
+		SOC_ALL,
+		.name = "plla",
+		.cm_ctrl_reg = CM_PLLA,
+		.a2w_ctrl_reg = A2W_PLLA_CTRL,
+		.frac_reg = A2W_PLLA_FRAC,
+		.ana_reg_base = A2W_PLLA_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLA_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKA,
+
+		.ana = &bcm2835_ana_default,
+
+		.min_rate = 600000000u,
+		.max_rate = 2400000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLA_CORE]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plla_core",
+		.source_pll = "plla",
+		.cm_reg = CM_PLLA,
+		.a2w_reg = A2W_PLLA_CORE,
+		.load_mask = CM_PLLA_LOADCORE,
+		.hold_mask = CM_PLLA_HOLDCORE,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLA_PER]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plla_per",
+		.source_pll = "plla",
+		.cm_reg = CM_PLLA,
+		.a2w_reg = A2W_PLLA_PER,
+		.load_mask = CM_PLLA_LOADPER,
+		.hold_mask = CM_PLLA_HOLDPER,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLA_DSI0]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plla_dsi0",
+		.source_pll = "plla",
+		.cm_reg = CM_PLLA,
+		.a2w_reg = A2W_PLLA_DSI0,
+		.load_mask = CM_PLLA_LOADDSI0,
+		.hold_mask = CM_PLLA_HOLDDSI0,
+		.fixed_divider = 1),
+	[BCM2835_PLLA_CCP2]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plla_ccp2",
+		.source_pll = "plla",
+		.cm_reg = CM_PLLA,
+		.a2w_reg = A2W_PLLA_CCP2,
+		.load_mask = CM_PLLA_LOADCCP2,
+		.hold_mask = CM_PLLA_HOLDCCP2,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+
+	/* PLLB is used for the ARM's clock. */
+	[BCM2835_PLLB]		= REGISTER_PLL(
+		SOC_ALL,
+		.name = "pllb",
+		.cm_ctrl_reg = CM_PLLB,
+		.a2w_ctrl_reg = A2W_PLLB_CTRL,
+		.frac_reg = A2W_PLLB_FRAC,
+		.ana_reg_base = A2W_PLLB_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKB,
+
+		.ana = &bcm2835_ana_default,
+
+		.min_rate = 600000000u,
+		.max_rate = 3000000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE,
+		.flags = CLK_GET_RATE_NOCACHE),
+	[BCM2835_PLLB_ARM]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllb_arm",
+		.source_pll = "pllb",
+		.cm_reg = CM_PLLB,
+		.a2w_reg = A2W_PLLB_ARM,
+		.load_mask = CM_PLLB_LOADARM,
+		.hold_mask = CM_PLLB_HOLDARM,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE),
+
+	/*
+	 * PLLC is the core PLL, used to drive the core VPU clock.
+	 *
+	 * It is in the PX LDO power domain, which is on when the
+	 * AUDIO domain is on.
+	 */
+	[BCM2835_PLLC]		= REGISTER_PLL(
+		SOC_ALL,
+		.name = "pllc",
+		.cm_ctrl_reg = CM_PLLC,
+		.a2w_ctrl_reg = A2W_PLLC_CTRL,
+		.frac_reg = A2W_PLLC_FRAC,
+		.ana_reg_base = A2W_PLLC_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKC,
+
+		.ana = &bcm2835_ana_default,
+
+		.min_rate = 600000000u,
+		.max_rate = 3000000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLC_CORE0]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllc_core0",
+		.source_pll = "pllc",
+		.cm_reg = CM_PLLC,
+		.a2w_reg = A2W_PLLC_CORE0,
+		.load_mask = CM_PLLC_LOADCORE0,
+		.hold_mask = CM_PLLC_HOLDCORE0,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLC_CORE1]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllc_core1",
+		.source_pll = "pllc",
+		.cm_reg = CM_PLLC,
+		.a2w_reg = A2W_PLLC_CORE1,
+		.load_mask = CM_PLLC_LOADCORE1,
+		.hold_mask = CM_PLLC_HOLDCORE1,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLC_CORE2]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllc_core2",
+		.source_pll = "pllc",
+		.cm_reg = CM_PLLC,
+		.a2w_reg = A2W_PLLC_CORE2,
+		.load_mask = CM_PLLC_LOADCORE2,
+		.hold_mask = CM_PLLC_HOLDCORE2,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLC_PER]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "pllc_per",
+		.source_pll = "pllc",
+		.cm_reg = CM_PLLC,
+		.a2w_reg = A2W_PLLC_PER,
+		.load_mask = CM_PLLC_LOADPER,
+		.hold_mask = CM_PLLC_HOLDPER,
+		.fixed_divider = 1,
+		.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
+
+	/*
+	 * PLLD is the display PLL, used to drive DSI display panels.
+	 *
+	 * It is in the PX LDO power domain, which is on when the
+	 * AUDIO domain is on.
+	 */
+	[BCM2835_PLLD]		= REGISTER_PLL(
+		SOC_ALL,
+		.name = "plld",
+		.cm_ctrl_reg = CM_PLLD,
+		.a2w_ctrl_reg = A2W_PLLD_CTRL,
+		.frac_reg = A2W_PLLD_FRAC,
+		.ana_reg_base = A2W_PLLD_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_DDR_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKD,
+
+		.ana = &bcm2835_ana_default,
+
+		.min_rate = 600000000u,
+		.max_rate = 2400000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLD_CORE]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plld_core",
+		.source_pll = "plld",
+		.cm_reg = CM_PLLD,
+		.a2w_reg = A2W_PLLD_CORE,
+		.load_mask = CM_PLLD_LOADCORE,
+		.hold_mask = CM_PLLD_HOLDCORE,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	/*
+	 * VPU firmware assumes that PLLD_PER isn't disabled by the ARM core.
+	 * Otherwise this could cause firmware lookups. That's why we mark
+	 * it as critical.
+	 */
+	[BCM2835_PLLD_PER]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plld_per",
+		.source_pll = "plld",
+		.cm_reg = CM_PLLD,
+		.a2w_reg = A2W_PLLD_PER,
+		.load_mask = CM_PLLD_LOADPER,
+		.hold_mask = CM_PLLD_HOLDPER,
+		.fixed_divider = 1,
+		.flags = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
+	[BCM2835_PLLD_DSI0]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plld_dsi0",
+		.source_pll = "plld",
+		.cm_reg = CM_PLLD,
+		.a2w_reg = A2W_PLLD_DSI0,
+		.load_mask = CM_PLLD_LOADDSI0,
+		.hold_mask = CM_PLLD_HOLDDSI0,
+		.fixed_divider = 1),
+	[BCM2835_PLLD_DSI1]	= REGISTER_PLL_DIV(
+		SOC_ALL,
+		.name = "plld_dsi1",
+		.source_pll = "plld",
+		.cm_reg = CM_PLLD,
+		.a2w_reg = A2W_PLLD_DSI1,
+		.load_mask = CM_PLLD_LOADDSI1,
+		.hold_mask = CM_PLLD_HOLDDSI1,
+		.fixed_divider = 1),
+
+	/*
+	 * PLLH is used to supply the pixel clock or the AUX clock for the
+	 * TV encoder.
+	 *
+	 * It is in the HDMI power domain.
+	 */
+	[BCM2835_PLLH]		= REGISTER_PLL(
+		SOC_BCM2835,
+		"pllh",
+		.cm_ctrl_reg = CM_PLLH,
+		.a2w_ctrl_reg = A2W_PLLH_CTRL,
+		.frac_reg = A2W_PLLH_FRAC,
+		.ana_reg_base = A2W_PLLH_ANA0,
+		.reference_enable_mask = A2W_XOSC_CTRL_PLLC_ENABLE,
+		.lock_mask = CM_LOCK_FLOCKH,
+
+		.ana = &bcm2835_ana_pllh,
+
+		.min_rate = 600000000u,
+		.max_rate = 3000000000u,
+		.max_fb_rate = BCM2835_MAX_FB_RATE),
+	[BCM2835_PLLH_RCAL]	= REGISTER_PLL_DIV(
+		SOC_BCM2835,
+		.name = "pllh_rcal",
+		.source_pll = "pllh",
+		.cm_reg = CM_PLLH,
+		.a2w_reg = A2W_PLLH_RCAL,
+		.load_mask = CM_PLLH_LOADRCAL,
+		.hold_mask = 0,
+		.fixed_divider = 10,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLH_AUX]	= REGISTER_PLL_DIV(
+		SOC_BCM2835,
+		.name = "pllh_aux",
+		.source_pll = "pllh",
+		.cm_reg = CM_PLLH,
+		.a2w_reg = A2W_PLLH_AUX,
+		.load_mask = CM_PLLH_LOADAUX,
+		.hold_mask = 0,
+		.fixed_divider = 1,
+		.flags = CLK_SET_RATE_PARENT),
+	[BCM2835_PLLH_PIX]	= REGISTER_PLL_DIV(
+		SOC_BCM2835,
+		.name = "pllh_pix",
+		.source_pll = "pllh",
+		.cm_reg = CM_PLLH,
+		.a2w_reg = A2W_PLLH_PIX,
+		.load_mask = CM_PLLH_LOADPIX,
+		.hold_mask = 0,
+		.fixed_divider = 10,
+		.flags = CLK_SET_RATE_PARENT),
+
+	/* the clocks */
+
+	/* clocks with oscillator parent mux */
+
+	/* One Time Programmable Memory clock.  Maximum 10Mhz. */
+	[BCM2835_CLOCK_OTP]	= REGISTER_OSC_CLK(
+		SOC_ALL,
+		.name = "otp",
+		.ctl_reg = CM_OTPCTL,
+		.div_reg = CM_OTPDIV,
+		.int_bits = 4,
+		.frac_bits = 0,
+		.tcnt_mux = 6),
+	/*
+	 * Used for a 1Mhz clock for the system clocksource, and also used
+	 * bythe watchdog timer and the camera pulse generator.
+	 */
+	[BCM2835_CLOCK_TIMER]	= REGISTER_OSC_CLK(
+		SOC_ALL,
+		.name = "timer",
+		.ctl_reg = CM_TIMERCTL,
+		.div_reg = CM_TIMERDIV,
+		.int_bits = 6,
+		.frac_bits = 12),
+	/*
+	 * Clock for the temperature sensor.
+	 * Generally run at 2Mhz, max 5Mhz.
+	 */
+	[BCM2835_CLOCK_TSENS]	= REGISTER_OSC_CLK(
+		SOC_ALL,
+		.name = "tsens",
+		.ctl_reg = CM_TSENSCTL,
+		.div_reg = CM_TSENSDIV,
+		.int_bits = 5,
+		.frac_bits = 0),
+	[BCM2835_CLOCK_TEC]	= REGISTER_OSC_CLK(
+		SOC_ALL,
+		.name = "tec",
+		.ctl_reg = CM_TECCTL,
+		.div_reg = CM_TECDIV,
+		.int_bits = 6,
+		.frac_bits = 0),
+
+	/* clocks with vpu parent mux */
+	[BCM2835_CLOCK_H264]	= REGISTER_VPU_CLK(
+		SOC_ALL,
+		.name = "h264",
+		.ctl_reg = CM_H264CTL,
+		.div_reg = CM_H264DIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 1),
+	[BCM2835_CLOCK_ISP]	= REGISTER_VPU_CLK(
+		SOC_ALL,
+		.name = "isp",
+		.ctl_reg = CM_ISPCTL,
+		.div_reg = CM_ISPDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 2),
+
+	/*
+	 * Secondary SDRAM clock.  Used for low-voltage modes when the PLL
+	 * in the SDRAM controller can't be used.
+	 */
+	[BCM2835_CLOCK_SDRAM]	= REGISTER_VPU_CLK(
+		SOC_ALL,
+		.name = "sdram",
+		.ctl_reg = CM_SDCCTL,
+		.div_reg = CM_SDCDIV,
+		.int_bits = 6,
+		.frac_bits = 0,
+		.tcnt_mux = 3),
+	[BCM2835_CLOCK_V3D]	= REGISTER_VPU_CLK(
+		SOC_ALL,
+		.name = "v3d",
+		.ctl_reg = CM_V3DCTL,
+		.div_reg = CM_V3DDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 4),
+	/*
+	 * VPU clock.  This doesn't have an enable bit, since it drives
+	 * the bus for everything else, and is special so it doesn't need
+	 * to be gated for rate changes.  It is also known as "clk_audio"
+	 * in various hardware documentation.
+	 */
+	[BCM2835_CLOCK_VPU]	= REGISTER_VPU_CLK(
+		SOC_ALL,
+		.name = "vpu",
+		.ctl_reg = CM_VPUCTL,
+		.div_reg = CM_VPUDIV,
+		.int_bits = 12,
+		.frac_bits = 8,
+		.flags = CLK_IS_CRITICAL,
+		.is_vpu_clock = true,
+		.tcnt_mux = 5),
+
+	/* clocks with per parent mux */
+	[BCM2835_CLOCK_AVEO]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "aveo",
+		.ctl_reg = CM_AVEOCTL,
+		.div_reg = CM_AVEODIV,
+		.int_bits = 4,
+		.frac_bits = 0,
+		.tcnt_mux = 38),
+	[BCM2835_CLOCK_CAM0]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "cam0",
+		.ctl_reg = CM_CAM0CTL,
+		.div_reg = CM_CAM0DIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 14),
+	[BCM2835_CLOCK_CAM1]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "cam1",
+		.ctl_reg = CM_CAM1CTL,
+		.div_reg = CM_CAM1DIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 15),
+	[BCM2835_CLOCK_DFT]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "dft",
+		.ctl_reg = CM_DFTCTL,
+		.div_reg = CM_DFTDIV,
+		.int_bits = 5,
+		.frac_bits = 0),
+	[BCM2835_CLOCK_DPI]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "dpi",
+		.ctl_reg = CM_DPICTL,
+		.div_reg = CM_DPIDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 17),
+
+	/* Arasan EMMC clock */
+	[BCM2835_CLOCK_EMMC]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "emmc",
+		.ctl_reg = CM_EMMCCTL,
+		.div_reg = CM_EMMCDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 39),
+
+	/* EMMC2 clock (only available for BCM2711) */
+	[BCM2711_CLOCK_EMMC2]	= REGISTER_PER_CLK(
+		SOC_BCM2711,
+		.name = "emmc2",
+		.ctl_reg = CM_EMMC2CTL,
+		.div_reg = CM_EMMC2DIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 42),
+
+	/* General purpose (GPIO) clocks */
+	[BCM2835_CLOCK_GP0]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "gp0",
+		.ctl_reg = CM_GP0CTL,
+		.div_reg = CM_GP0DIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.is_mash_clock = true,
+		.tcnt_mux = 20),
+	[BCM2835_CLOCK_GP1]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "gp1",
+		.ctl_reg = CM_GP1CTL,
+		.div_reg = CM_GP1DIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.flags = CLK_IS_CRITICAL,
+		.is_mash_clock = true,
+		.tcnt_mux = 21),
+	[BCM2835_CLOCK_GP2]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "gp2",
+		.ctl_reg = CM_GP2CTL,
+		.div_reg = CM_GP2DIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.flags = CLK_IS_CRITICAL),
+
+	/* HDMI state machine */
+	[BCM2835_CLOCK_HSM]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "hsm",
+		.ctl_reg = CM_HSMCTL,
+		.div_reg = CM_HSMDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 22),
+	[BCM2835_CLOCK_PCM]	= REGISTER_PCM_CLK(
+		SOC_ALL,
+		.name = "pcm",
+		.ctl_reg = CM_PCMCTL,
+		.div_reg = CM_PCMDIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.is_mash_clock = true,
+		.low_jitter = true,
+		.tcnt_mux = 23),
+	[BCM2835_CLOCK_PWM]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "pwm",
+		.ctl_reg = CM_PWMCTL,
+		.div_reg = CM_PWMDIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.is_mash_clock = true,
+		.tcnt_mux = 24),
+	[BCM2835_CLOCK_SLIM]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "slim",
+		.ctl_reg = CM_SLIMCTL,
+		.div_reg = CM_SLIMDIV,
+		.int_bits = 12,
+		.frac_bits = 12,
+		.is_mash_clock = true,
+		.tcnt_mux = 25),
+	[BCM2835_CLOCK_SMI]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "smi",
+		.ctl_reg = CM_SMICTL,
+		.div_reg = CM_SMIDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 27),
+	[BCM2835_CLOCK_UART]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "uart",
+		.ctl_reg = CM_UARTCTL,
+		.div_reg = CM_UARTDIV,
+		.int_bits = 10,
+		.frac_bits = 12,
+		.tcnt_mux = 28),
+
+	/* TV encoder clock.  Only operating frequency is 108Mhz.  */
+	[BCM2835_CLOCK_VEC]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "vec",
+		.ctl_reg = CM_VECCTL,
+		.div_reg = CM_VECDIV,
+		.int_bits = 4,
+		.frac_bits = 0,
+		/*
+		 * Allow rate change propagation only on PLLH_AUX which is
+		 * assigned index 7 in the parent array.
+		 */
+		.set_rate_parent = BIT(7),
+		.tcnt_mux = 29),
+
+	/* dsi clocks */
+	[BCM2835_CLOCK_DSI0E]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "dsi0e",
+		.ctl_reg = CM_DSI0ECTL,
+		.div_reg = CM_DSI0EDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 18),
+	[BCM2835_CLOCK_DSI1E]	= REGISTER_PER_CLK(
+		SOC_ALL,
+		.name = "dsi1e",
+		.ctl_reg = CM_DSI1ECTL,
+		.div_reg = CM_DSI1EDIV,
+		.int_bits = 4,
+		.frac_bits = 8,
+		.tcnt_mux = 19),
+	[BCM2835_CLOCK_DSI0P]	= REGISTER_DSI0_CLK(
+		SOC_ALL,
+		.name = "dsi0p",
+		.ctl_reg = CM_DSI0PCTL,
+		.div_reg = CM_DSI0PDIV,
+		.int_bits = 0,
+		.frac_bits = 0,
+		.tcnt_mux = 12),
+	[BCM2835_CLOCK_DSI1P]	= REGISTER_DSI1_CLK(
+		SOC_ALL,
+		.name = "dsi1p",
+		.ctl_reg = CM_DSI1PCTL,
+		.div_reg = CM_DSI1PDIV,
+		.int_bits = 0,
+		.frac_bits = 0,
+		.tcnt_mux = 13),
+
+	/* the gates */
+
+	/*
+	 * CM_PERIICTL (and CM_PERIACTL, CM_SYSCTL and CM_VPUCTL if
+	 * you have the debug bit set in the power manager, which we
+	 * don't bother exposing) are individual gates off of the
+	 * non-stop vpu clock.
+	 */
+	[BCM2835_CLOCK_PERI_IMAGE] = REGISTER_GATE(
+		SOC_ALL,
+		.name = "peri_image",
+		.parent = "vpu",
+		.ctl_reg = CM_PERIICTL),
+};
+
+/*
+ * Permanently take a reference on the parent of the SDRAM clock.
+ *
+ * While the SDRAM is being driven by its dedicated PLL most of the
+ * time, there is a little loop running in the firmware that
+ * periodically switches the SDRAM to using our CM clock to do PVT
+ * recalibration, with the assumption that the previously configured
+ * SDRAM parent is still enabled and running.
+ */
+static int bcm2835_mark_sdc_parent_critical(struct clk *sdc)
+{
+	struct clk *parent = clk_get_parent(sdc);
+
+	if (IS_ERR(parent))
+		return PTR_ERR(parent);
+
+	return clk_prepare_enable(parent);
+}
+
+static int bcm2835_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct clk_hw **hws;
+	struct bcm2835_cprman *cprman;
+	const struct bcm2835_clk_desc *desc;
+	const size_t asize = ARRAY_SIZE(clk_desc_array);
+	const struct cprman_plat_data *pdata;
+	size_t i;
+	int ret;
+
+	pdata = of_device_get_match_data(&pdev->dev);
+	if (!pdata)
+		return -ENODEV;
+
+	cprman = devm_kzalloc(dev,
+			      struct_size(cprman, onecell.hws, asize),
+			      GFP_KERNEL);
+	if (!cprman)
+		return -ENOMEM;
+
+	spin_lock_init(&cprman->regs_lock);
+	cprman->dev = dev;
+	cprman->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(cprman->regs))
+		return PTR_ERR(cprman->regs);
+
+	memcpy(cprman->real_parent_names, cprman_parent_names,
+	       sizeof(cprman_parent_names));
+	of_clk_parent_fill(dev->of_node, cprman->real_parent_names,
+			   ARRAY_SIZE(cprman_parent_names));
+
+	/*
+	 * Make sure the external oscillator has been registered.
+	 *
+	 * The other (DSI) clocks are not present on older device
+	 * trees, which we still need to support for backwards
+	 * compatibility.
+	 */
+	if (!cprman->real_parent_names[0])
+		return -ENODEV;
+
+	platform_set_drvdata(pdev, cprman);
+
+	cprman->onecell.num = asize;
+	cprman->soc = pdata->soc;
+	hws = cprman->onecell.hws;
+
+	for (i = 0; i < asize; i++) {
+		desc = &clk_desc_array[i];
+		if (desc->clk_register && desc->data &&
+		    (desc->supported & pdata->soc)) {
+			hws[i] = desc->clk_register(cprman, desc->data);
+		}
+	}
+
+	ret = bcm2835_mark_sdc_parent_critical(hws[BCM2835_CLOCK_SDRAM]->clk);
+	if (ret)
+		return ret;
+
+	return of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
+				      &cprman->onecell);
+}
+
+static const struct cprman_plat_data cprman_bcm2835_plat_data = {
+	.soc = SOC_BCM2835,
+};
+
+static const struct cprman_plat_data cprman_bcm2711_plat_data = {
+	.soc = SOC_BCM2711,
+};
+
+static const struct of_device_id bcm2835_clk_of_match[] = {
+	{ .compatible = "brcm,bcm2835-cprman", .data = &cprman_bcm2835_plat_data },
+	{ .compatible = "brcm,bcm2711-cprman", .data = &cprman_bcm2711_plat_data },
+	{}
+};
+MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
+
+static struct platform_driver bcm2835_clk_driver = {
+	.driver = {
+		.name = "bcm2835-clk",
+		.of_match_table = bcm2835_clk_of_match,
+	},
+	.probe          = bcm2835_clk_probe,
+};
+
+builtin_platform_driver(bcm2835_clk_driver);
+
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_DESCRIPTION("BCM2835 clock driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/bcm/clk-bcm53573-ilp.c b/drivers/clk/bcm/clk-bcm53573-ilp.c
new file mode 100644
index 000000000..84f2af736
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm53573-ilp.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define PMU_XTAL_FREQ_RATIO			0x66c
+#define  XTAL_ALP_PER_4ILP			0x00001fff
+#define  XTAL_CTL_EN				0x80000000
+#define PMU_SLOW_CLK_PERIOD			0x6dc
+
+struct bcm53573_ilp {
+	struct clk_hw hw;
+	struct regmap *regmap;
+};
+
+static int bcm53573_ilp_enable(struct clk_hw *hw)
+{
+	struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw);
+
+	regmap_write(ilp->regmap, PMU_SLOW_CLK_PERIOD, 0x10199);
+	regmap_write(ilp->regmap, 0x674, 0x10000);
+
+	return 0;
+}
+
+static void bcm53573_ilp_disable(struct clk_hw *hw)
+{
+	struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw);
+
+	regmap_write(ilp->regmap, PMU_SLOW_CLK_PERIOD, 0);
+	regmap_write(ilp->regmap, 0x674, 0);
+}
+
+static unsigned long bcm53573_ilp_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw);
+	struct regmap *regmap = ilp->regmap;
+	u32 last_val, cur_val;
+	int sum = 0, num = 0, loop_num = 0;
+	int avg;
+
+	/* Enable measurement */
+	regmap_write(regmap, PMU_XTAL_FREQ_RATIO, XTAL_CTL_EN);
+
+	/* Read initial value */
+	regmap_read(regmap, PMU_XTAL_FREQ_RATIO, &last_val);
+	last_val &= XTAL_ALP_PER_4ILP;
+
+	/*
+	 * At minimum we should loop for a bit to let hardware do the
+	 * measurement. This isn't very accurate however, so for a better
+	 * precision lets try getting 20 different values for and use average.
+	 */
+	while (num < 20) {
+		regmap_read(regmap, PMU_XTAL_FREQ_RATIO, &cur_val);
+		cur_val &= XTAL_ALP_PER_4ILP;
+
+		if (cur_val != last_val) {
+			/* Got different value, use it */
+			sum += cur_val;
+			num++;
+			loop_num = 0;
+			last_val = cur_val;
+		} else if (++loop_num > 5000) {
+			/* Same value over and over, give up */
+			sum += cur_val;
+			num++;
+			break;
+		}
+
+		cpu_relax();
+	}
+
+	/* Disable measurement to save power */
+	regmap_write(regmap, PMU_XTAL_FREQ_RATIO, 0x0);
+
+	avg = sum / num;
+
+	return parent_rate * 4 / avg;
+}
+
+static const struct clk_ops bcm53573_ilp_clk_ops = {
+	.enable = bcm53573_ilp_enable,
+	.disable = bcm53573_ilp_disable,
+	.recalc_rate = bcm53573_ilp_recalc_rate,
+};
+
+static void bcm53573_ilp_init(struct device_node *np)
+{
+	struct bcm53573_ilp *ilp;
+	struct clk_init_data init = { };
+	const char *parent_name;
+	int err;
+
+	ilp = kzalloc(sizeof(*ilp), GFP_KERNEL);
+	if (!ilp)
+		return;
+
+	parent_name = of_clk_get_parent_name(np, 0);
+	if (!parent_name) {
+		err = -ENOENT;
+		goto err_free_ilp;
+	}
+
+	ilp->regmap = syscon_node_to_regmap(of_get_parent(np));
+	if (IS_ERR(ilp->regmap)) {
+		err = PTR_ERR(ilp->regmap);
+		goto err_free_ilp;
+	}
+
+	init.name = np->name;
+	init.ops = &bcm53573_ilp_clk_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	ilp->hw.init = &init;
+	err = clk_hw_register(NULL, &ilp->hw);
+	if (err)
+		goto err_free_ilp;
+
+	err = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &ilp->hw);
+	if (err)
+		goto err_clk_hw_unregister;
+
+	return;
+
+err_clk_hw_unregister:
+	clk_hw_unregister(&ilp->hw);
+err_free_ilp:
+	kfree(ilp);
+	pr_err("Failed to init ILP clock: %d\n", err);
+}
+
+/* We need it very early for arch code, before device model gets ready */
+CLK_OF_DECLARE(bcm53573_ilp_clk, "brcm,bcm53573-ilp", bcm53573_ilp_init);
diff --git a/drivers/clk/bcm/clk-bcm63xx-gate.c b/drivers/clk/bcm/clk-bcm63xx-gate.c
new file mode 100644
index 000000000..89297c578
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm63xx-gate.c
@@ -0,0 +1,579 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/clk-provider.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/bcm3368-clock.h>
+#include <dt-bindings/clock/bcm6318-clock.h>
+#include <dt-bindings/clock/bcm6328-clock.h>
+#include <dt-bindings/clock/bcm6358-clock.h>
+#include <dt-bindings/clock/bcm6362-clock.h>
+#include <dt-bindings/clock/bcm6368-clock.h>
+#include <dt-bindings/clock/bcm63268-clock.h>
+
+struct clk_bcm63xx_table_entry {
+	const char * const name;
+	u8 bit;
+	unsigned long flags;
+};
+
+struct clk_bcm63xx_hw {
+	void __iomem *regs;
+	spinlock_t lock;
+
+	struct clk_hw_onecell_data data;
+};
+
+static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = {
+	{
+		.name = "mac",
+		.bit = BCM3368_CLK_MAC,
+	}, {
+		.name = "tc",
+		.bit = BCM3368_CLK_TC,
+	}, {
+		.name = "us_top",
+		.bit = BCM3368_CLK_US_TOP,
+	}, {
+		.name = "ds_top",
+		.bit = BCM3368_CLK_DS_TOP,
+	}, {
+		.name = "acm",
+		.bit = BCM3368_CLK_ACM,
+	}, {
+		.name = "spi",
+		.bit = BCM3368_CLK_SPI,
+	}, {
+		.name = "usbs",
+		.bit = BCM3368_CLK_USBS,
+	}, {
+		.name = "bmu",
+		.bit = BCM3368_CLK_BMU,
+	}, {
+		.name = "pcm",
+		.bit = BCM3368_CLK_PCM,
+	}, {
+		.name = "ntp",
+		.bit = BCM3368_CLK_NTP,
+	}, {
+		.name = "acp_b",
+		.bit = BCM3368_CLK_ACP_B,
+	}, {
+		.name = "acp_a",
+		.bit = BCM3368_CLK_ACP_A,
+	}, {
+		.name = "emusb",
+		.bit = BCM3368_CLK_EMUSB,
+	}, {
+		.name = "enet0",
+		.bit = BCM3368_CLK_ENET0,
+	}, {
+		.name = "enet1",
+		.bit = BCM3368_CLK_ENET1,
+	}, {
+		.name = "usbsu",
+		.bit = BCM3368_CLK_USBSU,
+	}, {
+		.name = "ephy",
+		.bit = BCM3368_CLK_EPHY,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = {
+	{
+		.name = "adsl_asb",
+		.bit = BCM6318_CLK_ADSL_ASB,
+	}, {
+		.name = "usb_asb",
+		.bit = BCM6318_CLK_USB_ASB,
+	}, {
+		.name = "mips_asb",
+		.bit = BCM6318_CLK_MIPS_ASB,
+	}, {
+		.name = "pcie_asb",
+		.bit = BCM6318_CLK_PCIE_ASB,
+	}, {
+		.name = "phymips_asb",
+		.bit = BCM6318_CLK_PHYMIPS_ASB,
+	}, {
+		.name = "robosw_asb",
+		.bit = BCM6318_CLK_ROBOSW_ASB,
+	}, {
+		.name = "sar_asb",
+		.bit = BCM6318_CLK_SAR_ASB,
+	}, {
+		.name = "sdr_asb",
+		.bit = BCM6318_CLK_SDR_ASB,
+	}, {
+		.name = "swreg_asb",
+		.bit = BCM6318_CLK_SWREG_ASB,
+	}, {
+		.name = "periph_asb",
+		.bit = BCM6318_CLK_PERIPH_ASB,
+	}, {
+		.name = "cpubus160",
+		.bit = BCM6318_CLK_CPUBUS160,
+	}, {
+		.name = "adsl",
+		.bit = BCM6318_CLK_ADSL,
+	}, {
+		.name = "sar125",
+		.bit = BCM6318_CLK_SAR125,
+	}, {
+		.name = "mips",
+		.bit = BCM6318_CLK_MIPS,
+		.flags = CLK_IS_CRITICAL,
+	}, {
+		.name = "pcie",
+		.bit = BCM6318_CLK_PCIE,
+	}, {
+		.name = "robosw250",
+		.bit = BCM6318_CLK_ROBOSW250,
+	}, {
+		.name = "robosw025",
+		.bit = BCM6318_CLK_ROBOSW025,
+	}, {
+		.name = "sdr",
+		.bit = BCM6318_CLK_SDR,
+		.flags = CLK_IS_CRITICAL,
+	}, {
+		.name = "usbd",
+		.bit = BCM6318_CLK_USBD,
+	}, {
+		.name = "hsspi",
+		.bit = BCM6318_CLK_HSSPI,
+	}, {
+		.name = "pcie25",
+		.bit = BCM6318_CLK_PCIE25,
+	}, {
+		.name = "phymips",
+		.bit = BCM6318_CLK_PHYMIPS,
+	}, {
+		.name = "afe",
+		.bit = BCM6318_CLK_AFE,
+	}, {
+		.name = "qproc",
+		.bit = BCM6318_CLK_QPROC,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct clk_bcm63xx_table_entry bcm6318_ubus_clocks[] = {
+	{
+		.name = "adsl-ubus",
+		.bit = BCM6318_UCLK_ADSL,
+	}, {
+		.name = "arb-ubus",
+		.bit = BCM6318_UCLK_ARB,
+		.flags = CLK_IS_CRITICAL,
+	}, {
+		.name = "mips-ubus",
+		.bit = BCM6318_UCLK_MIPS,
+		.flags = CLK_IS_CRITICAL,
+	}, {
+		.name = "pcie-ubus",
+		.bit = BCM6318_UCLK_PCIE,
+	}, {
+		.name = "periph-ubus",
+		.bit = BCM6318_UCLK_PERIPH,
+		.flags = CLK_IS_CRITICAL,
+	}, {
+		.name = "phymips-ubus",
+		.bit = BCM6318_UCLK_PHYMIPS,
+	}, {
+		.name = "robosw-ubus",
+		.bit = BCM6318_UCLK_ROBOSW,
+	}, {
+		.name = "sar-ubus",
+		.bit = BCM6318_UCLK_SAR,
+	}, {
+		.name = "sdr-ubus",
+		.bit = BCM6318_UCLK_SDR,
+	}, {
+		.name = "usb-ubus",
+		.bit = BCM6318_UCLK_USB,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct clk_bcm63xx_table_entry bcm6328_clocks[] = {
+	{
+		.name = "phy_mips",
+		.bit = BCM6328_CLK_PHYMIPS,
+	}, {
+		.name = "adsl_qproc",
+		.bit = BCM6328_CLK_ADSL_QPROC,
+	}, {
+		.name = "adsl_afe",
+		.bit = BCM6328_CLK_ADSL_AFE,
+	}, {
+		.name = "adsl",
+		.bit = BCM6328_CLK_ADSL,
+	}, {
+		.name = "mips",
+		.bit = BCM6328_CLK_MIPS,
+		.flags = CLK_IS_CRITICAL,
+	}, {
+		.name = "sar",
+		.bit = BCM6328_CLK_SAR,
+	}, {
+		.name = "pcm",
+		.bit = BCM6328_CLK_PCM,
+	}, {
+		.name = "usbd",
+		.bit = BCM6328_CLK_USBD,
+	}, {
+		.name = "usbh",
+		.bit = BCM6328_CLK_USBH,
+	}, {
+		.name = "hsspi",
+		.bit = BCM6328_CLK_HSSPI,
+	}, {
+		.name = "pcie",
+		.bit = BCM6328_CLK_PCIE,
+	}, {
+		.name = "robosw",
+		.bit = BCM6328_CLK_ROBOSW,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct clk_bcm63xx_table_entry bcm6358_clocks[] = {
+	{
+		.name = "enet",
+		.bit = BCM6358_CLK_ENET,
+	}, {
+		.name = "adslphy",
+		.bit = BCM6358_CLK_ADSLPHY,
+	}, {
+		.name = "pcm",
+		.bit = BCM6358_CLK_PCM,
+	}, {
+		.name = "spi",
+		.bit = BCM6358_CLK_SPI,
+	}, {
+		.name = "usbs",
+		.bit = BCM6358_CLK_USBS,
+	}, {
+		.name = "sar",
+		.bit = BCM6358_CLK_SAR,
+	}, {
+		.name = "emusb",
+		.bit = BCM6358_CLK_EMUSB,
+	}, {
+		.name = "enet0",
+		.bit = BCM6358_CLK_ENET0,
+	}, {
+		.name = "enet1",
+		.bit = BCM6358_CLK_ENET1,
+	}, {
+		.name = "usbsu",
+		.bit = BCM6358_CLK_USBSU,
+	}, {
+		.name = "ephy",
+		.bit = BCM6358_CLK_EPHY,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct clk_bcm63xx_table_entry bcm6362_clocks[] = {
+	{
+		.name = "adsl_qproc",
+		.bit = BCM6362_CLK_ADSL_QPROC,
+	}, {
+		.name = "adsl_afe",
+		.bit = BCM6362_CLK_ADSL_AFE,
+	}, {
+		.name = "adsl",
+		.bit = BCM6362_CLK_ADSL,
+	}, {
+		.name = "mips",
+		.bit = BCM6362_CLK_MIPS,
+		.flags = CLK_IS_CRITICAL,
+	}, {
+		.name = "wlan_ocp",
+		.bit = BCM6362_CLK_WLAN_OCP,
+	}, {
+		.name = "swpkt_usb",
+		.bit = BCM6362_CLK_SWPKT_USB,
+	}, {
+		.name = "swpkt_sar",
+		.bit = BCM6362_CLK_SWPKT_SAR,
+	}, {
+		.name = "sar",
+		.bit = BCM6362_CLK_SAR,
+	}, {
+		.name = "robosw",
+		.bit = BCM6362_CLK_ROBOSW,
+	}, {
+		.name = "pcm",
+		.bit = BCM6362_CLK_PCM,
+	}, {
+		.name = "usbd",
+		.bit = BCM6362_CLK_USBD,
+	}, {
+		.name = "usbh",
+		.bit = BCM6362_CLK_USBH,
+	}, {
+		.name = "ipsec",
+		.bit = BCM6362_CLK_IPSEC,
+	}, {
+		.name = "spi",
+		.bit = BCM6362_CLK_SPI,
+	}, {
+		.name = "hsspi",
+		.bit = BCM6362_CLK_HSSPI,
+	}, {
+		.name = "pcie",
+		.bit = BCM6362_CLK_PCIE,
+	}, {
+		.name = "fap",
+		.bit = BCM6362_CLK_FAP,
+	}, {
+		.name = "phymips",
+		.bit = BCM6362_CLK_PHYMIPS,
+	}, {
+		.name = "nand",
+		.bit = BCM6362_CLK_NAND,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct clk_bcm63xx_table_entry bcm6368_clocks[] = {
+	{
+		.name = "vdsl_qproc",
+		.bit = BCM6368_CLK_VDSL_QPROC,
+	}, {
+		.name = "vdsl_afe",
+		.bit = BCM6368_CLK_VDSL_AFE,
+	}, {
+		.name = "vdsl_bonding",
+		.bit = BCM6368_CLK_VDSL_BONDING,
+	}, {
+		.name = "vdsl",
+		.bit = BCM6368_CLK_VDSL,
+	}, {
+		.name = "phymips",
+		.bit = BCM6368_CLK_PHYMIPS,
+	}, {
+		.name = "swpkt_usb",
+		.bit = BCM6368_CLK_SWPKT_USB,
+	}, {
+		.name = "swpkt_sar",
+		.bit = BCM6368_CLK_SWPKT_SAR,
+	}, {
+		.name = "spi",
+		.bit = BCM6368_CLK_SPI,
+	}, {
+		.name = "usbd",
+		.bit = BCM6368_CLK_USBD,
+	}, {
+		.name = "sar",
+		.bit = BCM6368_CLK_SAR,
+	}, {
+		.name = "robosw",
+		.bit = BCM6368_CLK_ROBOSW,
+	}, {
+		.name = "utopia",
+		.bit = BCM6368_CLK_UTOPIA,
+	}, {
+		.name = "pcm",
+		.bit = BCM6368_CLK_PCM,
+	}, {
+		.name = "usbh",
+		.bit = BCM6368_CLK_USBH,
+	}, {
+		.name = "disable_gless",
+		.bit = BCM6368_CLK_DIS_GLESS,
+	}, {
+		.name = "nand",
+		.bit = BCM6368_CLK_NAND,
+	}, {
+		.name = "ipsec",
+		.bit = BCM6368_CLK_IPSEC,
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct clk_bcm63xx_table_entry bcm63268_clocks[] = {
+	{
+		.name = "disable_gless",
+		.bit = BCM63268_CLK_DIS_GLESS,
+	}, {
+		.name = "vdsl_qproc",
+		.bit = BCM63268_CLK_VDSL_QPROC,
+	}, {
+		.name = "vdsl_afe",
+		.bit = BCM63268_CLK_VDSL_AFE,
+	}, {
+		.name = "vdsl",
+		.bit = BCM63268_CLK_VDSL,
+	}, {
+		.name = "mips",
+		.bit = BCM63268_CLK_MIPS,
+		.flags = CLK_IS_CRITICAL,
+	}, {
+		.name = "wlan_ocp",
+		.bit = BCM63268_CLK_WLAN_OCP,
+	}, {
+		.name = "dect",
+		.bit = BCM63268_CLK_DECT,
+	}, {
+		.name = "fap0",
+		.bit = BCM63268_CLK_FAP0,
+	}, {
+		.name = "fap1",
+		.bit = BCM63268_CLK_FAP1,
+	}, {
+		.name = "sar",
+		.bit = BCM63268_CLK_SAR,
+	}, {
+		.name = "robosw",
+		.bit = BCM63268_CLK_ROBOSW,
+	}, {
+		.name = "pcm",
+		.bit = BCM63268_CLK_PCM,
+	}, {
+		.name = "usbd",
+		.bit = BCM63268_CLK_USBD,
+	}, {
+		.name = "usbh",
+		.bit = BCM63268_CLK_USBH,
+	}, {
+		.name = "ipsec",
+		.bit = BCM63268_CLK_IPSEC,
+	}, {
+		.name = "spi",
+		.bit = BCM63268_CLK_SPI,
+	}, {
+		.name = "hsspi",
+		.bit = BCM63268_CLK_HSSPI,
+	}, {
+		.name = "pcie",
+		.bit = BCM63268_CLK_PCIE,
+	}, {
+		.name = "phymips",
+		.bit = BCM63268_CLK_PHYMIPS,
+	}, {
+		.name = "gmac",
+		.bit = BCM63268_CLK_GMAC,
+	}, {
+		.name = "nand",
+		.bit = BCM63268_CLK_NAND,
+	}, {
+		.name = "tbus",
+		.bit = BCM63268_CLK_TBUS,
+	}, {
+		.name = "robosw250",
+		.bit = BCM63268_CLK_ROBOSW250,
+	}, {
+		/* sentinel */
+	},
+};
+
+static int clk_bcm63xx_probe(struct platform_device *pdev)
+{
+	const struct clk_bcm63xx_table_entry *entry, *table;
+	struct clk_bcm63xx_hw *hw;
+	u8 maxbit = 0;
+	int i, ret;
+
+	table = of_device_get_match_data(&pdev->dev);
+	if (!table)
+		return -EINVAL;
+
+	for (entry = table; entry->name; entry++)
+		maxbit = max_t(u8, maxbit, entry->bit);
+	maxbit++;
+
+	hw = devm_kzalloc(&pdev->dev, struct_size(hw, data.hws, maxbit),
+			  GFP_KERNEL);
+	if (!hw)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, hw);
+
+	spin_lock_init(&hw->lock);
+
+	hw->data.num = maxbit;
+	for (i = 0; i < maxbit; i++)
+		hw->data.hws[i] = ERR_PTR(-ENODEV);
+
+	hw->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(hw->regs))
+		return PTR_ERR(hw->regs);
+
+	for (entry = table; entry->name; entry++) {
+		struct clk_hw *clk;
+
+		clk = clk_hw_register_gate(&pdev->dev, entry->name, NULL,
+					   entry->flags, hw->regs, entry->bit,
+					   CLK_GATE_BIG_ENDIAN, &hw->lock);
+		if (IS_ERR(clk)) {
+			ret = PTR_ERR(clk);
+			goto out_err;
+		}
+
+		hw->data.hws[entry->bit] = clk;
+	}
+
+	ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get,
+				     &hw->data);
+	if (!ret)
+		return 0;
+out_err:
+	for (i = 0; i < hw->data.num; i++) {
+		if (!IS_ERR(hw->data.hws[i]))
+			clk_hw_unregister_gate(hw->data.hws[i]);
+	}
+
+	return ret;
+}
+
+static int clk_bcm63xx_remove(struct platform_device *pdev)
+{
+	struct clk_bcm63xx_hw *hw = platform_get_drvdata(pdev);
+	int i;
+
+	of_clk_del_provider(pdev->dev.of_node);
+
+	for (i = 0; i < hw->data.num; i++) {
+		if (!IS_ERR(hw->data.hws[i]))
+			clk_hw_unregister_gate(hw->data.hws[i]);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id clk_bcm63xx_dt_ids[] = {
+	{ .compatible = "brcm,bcm3368-clocks", .data = &bcm3368_clocks, },
+	{ .compatible = "brcm,bcm6318-clocks", .data = &bcm6318_clocks, },
+	{ .compatible = "brcm,bcm6318-ubus-clocks", .data = &bcm6318_ubus_clocks, },
+	{ .compatible = "brcm,bcm6328-clocks", .data = &bcm6328_clocks, },
+	{ .compatible = "brcm,bcm6358-clocks", .data = &bcm6358_clocks, },
+	{ .compatible = "brcm,bcm6362-clocks", .data = &bcm6362_clocks, },
+	{ .compatible = "brcm,bcm6368-clocks", .data = &bcm6368_clocks, },
+	{ .compatible = "brcm,bcm63268-clocks", .data = &bcm63268_clocks, },
+	{ }
+};
+
+static struct platform_driver clk_bcm63xx = {
+	.probe = clk_bcm63xx_probe,
+	.remove = clk_bcm63xx_remove,
+	.driver = {
+		.name = "bcm63xx-clock",
+		.of_match_table = clk_bcm63xx_dt_ids,
+	},
+};
+builtin_platform_driver(clk_bcm63xx);
diff --git a/drivers/clk/bcm/clk-bcm63xx.c b/drivers/clk/bcm/clk-bcm63xx.c
new file mode 100644
index 000000000..fbc17ae5f
--- /dev/null
+++ b/drivers/clk/bcm/clk-bcm63xx.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include "clk-iproc.h"
+
+static void __init bcm63138_armpll_init(struct device_node *node)
+{
+	iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(bcm63138_armpll, "brcm,bcm63138-armpll", bcm63138_armpll_init);
diff --git a/drivers/clk/bcm/clk-cygnus.c b/drivers/clk/bcm/clk-cygnus.c
new file mode 100644
index 000000000..b8d073e48
--- /dev/null
+++ b/drivers/clk/bcm/clk-cygnus.c
@@ -0,0 +1,314 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include <dt-bindings/clock/bcm-cygnus.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+	.pwr_shift = ps, .iso_shift = is }
+
+#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
+
+#define ASIU_DIV_VAL(o, es, hs, hw, ls, lw) \
+		{ .offset = o, .en_shift = es, .high_shift = hs, \
+		.high_width = hw, .low_shift = ls, .low_width = lw }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+	.p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
+	.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas,    \
+	.ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+	.hold_shift = hs, .bypass_shift = bs }
+
+#define ASIU_GATE_VAL(o, es) { .offset = o, .en_shift = es }
+
+static void __init cygnus_armpll_init(struct device_node *node)
+{
+	iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(cygnus_armpll, "brcm,cygnus-armpll", cygnus_armpll_init);
+
+static const struct iproc_pll_ctrl genpll = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 2, 1, 0),
+	.reset = RESET_VAL(0x0, 11, 10),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
+	.status = REG_VAL(0x28, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll_clk[] = {
+	[BCM_CYGNUS_GENPLL_AXI21_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x20, 0, 8),
+	},
+	[BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x20, 10, 8),
+	},
+	[BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x20, 20, 8),
+	},
+	[BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x24, 0, 8),
+	},
+	[BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x24, 10, 8),
+	},
+	[BCM_CYGNUS_GENPLL_CAN_CLK] = {
+		.channel = BCM_CYGNUS_GENPLL_CAN_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 11, 5, 17),
+		.mdiv = REG_VAL(0x24, 20, 8),
+	},
+};
+
+static void __init cygnus_genpll_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
+			    ARRAY_SIZE(genpll_clk));
+}
+CLK_OF_DECLARE(cygnus_genpll, "brcm,cygnus-genpll", cygnus_genpll_clk_init);
+
+static const struct iproc_pll_ctrl lcpll0 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 2, 5, 4),
+	.reset = RESET_VAL(0x0, 31, 30),
+	.dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
+	.sw_ctrl = SW_CTRL_VAL(0x4, 31),
+	.ndiv_int = REG_VAL(0x4, 16, 10),
+	.pdiv = REG_VAL(0x4, 26, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x10, 0x14),
+	.status = REG_VAL(0x18, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll0_clk[] = {
+	[BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
+		.channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 7, 1, 13),
+		.mdiv = REG_VAL(0x8, 0, 8),
+	},
+	[BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
+		.channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 8, 2, 14),
+		.mdiv = REG_VAL(0x8, 10, 8),
+	},
+	[BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
+		.channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 9, 3, 15),
+		.mdiv = REG_VAL(0x8, 20, 8),
+	},
+	[BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
+		.channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 10, 4, 16),
+		.mdiv = REG_VAL(0xc, 0, 8),
+	},
+	[BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
+		.channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 11, 5, 17),
+		.mdiv = REG_VAL(0xc, 10, 8),
+	},
+	[BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
+		.channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 12, 6, 18),
+		.mdiv = REG_VAL(0xc, 20, 8),
+	},
+};
+
+static void __init cygnus_lcpll0_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
+			    ARRAY_SIZE(lcpll0_clk));
+}
+CLK_OF_DECLARE(cygnus_lcpll0, "brcm,cygnus-lcpll0", cygnus_lcpll0_clk_init);
+
+/*
+ * MIPI PLL VCO frequency parameter table
+ */
+static const struct iproc_pll_vco_param mipipll_vco_params[] = {
+	/* rate (Hz) ndiv_int ndiv_frac pdiv */
+	{ 750000000UL,   30,     0,        1 },
+	{ 1000000000UL,  40,     0,        1 },
+	{ 1350000000ul,  54,     0,        1 },
+	{ 2000000000UL,  80,     0,        1 },
+	{ 2100000000UL,  84,     0,        1 },
+	{ 2250000000UL,  90,     0,        1 },
+	{ 2500000000UL,  100,    0,        1 },
+	{ 2700000000UL,  54,     0,        0 },
+	{ 2975000000UL,  119,    0,        1 },
+	{ 3100000000UL,  124,    0,        1 },
+	{ 3150000000UL,  126,    0,        1 },
+};
+
+static const struct iproc_pll_ctrl mipipll = {
+	.flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		 IPROC_CLK_NEEDS_READ_BACK,
+	.aon = AON_VAL(0x0, 4, 17, 16),
+	.asiu = ASIU_GATE_VAL(0x0, 3),
+	.reset = RESET_VAL(0x0, 11, 10),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
+	.status = REG_VAL(0x28, 12, 1),
+};
+
+static const struct iproc_clk_ctrl mipipll_clk[] = {
+	[BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = ENABLE_VAL(0x4, 12, 6, 18),
+		.mdiv = REG_VAL(0x20, 0, 8),
+	},
+	[BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = ENABLE_VAL(0x4, 13, 7, 19),
+		.mdiv = REG_VAL(0x20, 10, 8),
+	},
+	[BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = ENABLE_VAL(0x4, 14, 8, 20),
+		.mdiv = REG_VAL(0x20, 20, 8),
+	},
+	[BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = ENABLE_VAL(0x4, 15, 9, 21),
+		.mdiv = REG_VAL(0x24, 0, 8),
+	},
+	[BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = ENABLE_VAL(0x4, 16, 10, 22),
+		.mdiv = REG_VAL(0x24, 10, 8),
+	},
+	[BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
+		.channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
+		.flags = IPROC_CLK_NEEDS_READ_BACK,
+		.enable = ENABLE_VAL(0x4, 17, 11, 23),
+		.mdiv = REG_VAL(0x24, 20, 8),
+	},
+};
+
+static void __init cygnus_mipipll_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &mipipll, mipipll_vco_params,
+			    ARRAY_SIZE(mipipll_vco_params), mipipll_clk,
+			    ARRAY_SIZE(mipipll_clk));
+}
+CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);
+
+static const struct iproc_asiu_div asiu_div[] = {
+	[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_DIV_VAL(0x0, 31, 16, 10, 0, 10),
+	[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_DIV_VAL(0x4, 31, 16, 10, 0, 10),
+	[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_DIV_VAL(0x8, 31, 16, 10, 0, 10),
+};
+
+static const struct iproc_asiu_gate asiu_gate[] = {
+	[BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_GATE_VAL(0x0, 7),
+	[BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_GATE_VAL(0x0, 9),
+	[BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_GATE_VAL(IPROC_CLK_INVALID_OFFSET, 0),
+};
+
+static void __init cygnus_asiu_init(struct device_node *node)
+{
+	iproc_asiu_setup(node, asiu_div, asiu_gate, ARRAY_SIZE(asiu_div));
+}
+CLK_OF_DECLARE(cygnus_asiu_clk, "brcm,cygnus-asiu-clk", cygnus_asiu_init);
+
+static const struct iproc_pll_ctrl audiopll = {
+	.flags = IPROC_CLK_PLL_NEEDS_SW_CFG | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_USER_MODE_ON | IPROC_CLK_PLL_RESET_ACTIVE_LOW |
+		IPROC_CLK_PLL_CALC_PARAM,
+	.reset = RESET_VAL(0x5c, 0, 1),
+	.dig_filter = DF_VAL(0x48, 0, 3, 6, 4, 3, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x4, 0),
+	.ndiv_int = REG_VAL(0x8, 0, 10),
+	.ndiv_frac = REG_VAL(0x8, 10, 20),
+	.pdiv = REG_VAL(0x44, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x0c, 0x10),
+	.status = REG_VAL(0x54, 0, 1),
+	.macro_mode = REG_VAL(0x0, 0, 3),
+};
+
+static const struct iproc_clk_ctrl audiopll_clk[] = {
+	[BCM_CYGNUS_AUDIOPLL_CH0] = {
+		.channel = BCM_CYGNUS_AUDIOPLL_CH0,
+		.flags = IPROC_CLK_AON | IPROC_CLK_MCLK_DIV_BY_2,
+		.enable = ENABLE_VAL(0x14, 8, 10, 9),
+		.mdiv = REG_VAL(0x14, 0, 8),
+	},
+	[BCM_CYGNUS_AUDIOPLL_CH1] = {
+		.channel = BCM_CYGNUS_AUDIOPLL_CH1,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x18, 8, 10, 9),
+		.mdiv = REG_VAL(0x18, 0, 8),
+	},
+	[BCM_CYGNUS_AUDIOPLL_CH2] = {
+		.channel = BCM_CYGNUS_AUDIOPLL_CH2,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x1c, 8, 10, 9),
+		.mdiv = REG_VAL(0x1c, 0, 8),
+	},
+};
+
+static void __init cygnus_audiopll_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &audiopll, NULL, 0,
+			    audiopll_clk,  ARRAY_SIZE(audiopll_clk));
+}
+CLK_OF_DECLARE(cygnus_audiopll, "brcm,cygnus-audiopll",
+			cygnus_audiopll_clk_init);
diff --git a/drivers/clk/bcm/clk-hr2.c b/drivers/clk/bcm/clk-hr2.c
new file mode 100644
index 000000000..f7c5b7379
--- /dev/null
+++ b/drivers/clk/bcm/clk-hr2.c
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk-iproc.h"
+
+static void __init hr2_armpll_init(struct device_node *node)
+{
+	iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(hr2_armpll, "brcm,hr2-armpll", hr2_armpll_init);
diff --git a/drivers/clk/bcm/clk-iproc-armpll.c b/drivers/clk/bcm/clk-iproc-armpll.c
new file mode 100644
index 000000000..d7d628214
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-armpll.c
@@ -0,0 +1,283 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+
+#include "clk-iproc.h"
+
+#define IPROC_CLK_MAX_FREQ_POLICY                    0x3
+#define IPROC_CLK_POLICY_FREQ_OFFSET                 0x008
+#define IPROC_CLK_POLICY_FREQ_POLICY_FREQ_SHIFT      8
+#define IPROC_CLK_POLICY_FREQ_POLICY_FREQ_MASK       0x7
+
+#define IPROC_CLK_PLLARMA_OFFSET                     0xc00
+#define IPROC_CLK_PLLARMA_LOCK_SHIFT                 28
+#define IPROC_CLK_PLLARMA_PDIV_SHIFT                 24
+#define IPROC_CLK_PLLARMA_PDIV_MASK                  0xf
+#define IPROC_CLK_PLLARMA_NDIV_INT_SHIFT             8
+#define IPROC_CLK_PLLARMA_NDIV_INT_MASK              0x3ff
+
+#define IPROC_CLK_PLLARMB_OFFSET                     0xc04
+#define IPROC_CLK_PLLARMB_NDIV_FRAC_MASK             0xfffff
+
+#define IPROC_CLK_PLLARMC_OFFSET                     0xc08
+#define IPROC_CLK_PLLARMC_BYPCLK_EN_SHIFT            8
+#define IPROC_CLK_PLLARMC_MDIV_MASK                  0xff
+
+#define IPROC_CLK_PLLARMCTL5_OFFSET                  0xc20
+#define IPROC_CLK_PLLARMCTL5_H_MDIV_MASK             0xff
+
+#define IPROC_CLK_PLLARM_OFFSET_OFFSET               0xc24
+#define IPROC_CLK_PLLARM_SW_CTL_SHIFT                29
+#define IPROC_CLK_PLLARM_NDIV_INT_OFFSET_SHIFT       20
+#define IPROC_CLK_PLLARM_NDIV_INT_OFFSET_MASK        0xff
+#define IPROC_CLK_PLLARM_NDIV_FRAC_OFFSET_MASK       0xfffff
+
+#define IPROC_CLK_ARM_DIV_OFFSET                     0xe00
+#define IPROC_CLK_ARM_DIV_PLL_SELECT_OVERRIDE_SHIFT  4
+#define IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_MASK        0xf
+
+#define IPROC_CLK_POLICY_DBG_OFFSET                  0xec0
+#define IPROC_CLK_POLICY_DBG_ACT_FREQ_SHIFT          12
+#define IPROC_CLK_POLICY_DBG_ACT_FREQ_MASK           0x7
+
+enum iproc_arm_pll_fid {
+	ARM_PLL_FID_CRYSTAL_CLK   = 0,
+	ARM_PLL_FID_SYS_CLK       = 2,
+	ARM_PLL_FID_CH0_SLOW_CLK  = 6,
+	ARM_PLL_FID_CH1_FAST_CLK  = 7
+};
+
+struct iproc_arm_pll {
+	struct clk_hw hw;
+	void __iomem *base;
+	unsigned long rate;
+};
+
+#define to_iproc_arm_pll(hw) container_of(hw, struct iproc_arm_pll, hw)
+
+static unsigned int __get_fid(struct iproc_arm_pll *pll)
+{
+	u32 val;
+	unsigned int policy, fid, active_fid;
+
+	val = readl(pll->base + IPROC_CLK_ARM_DIV_OFFSET);
+	if (val & (1 << IPROC_CLK_ARM_DIV_PLL_SELECT_OVERRIDE_SHIFT))
+		policy = val & IPROC_CLK_ARM_DIV_ARM_PLL_SELECT_MASK;
+	else
+		policy = 0;
+
+	/* something is seriously wrong */
+	BUG_ON(policy > IPROC_CLK_MAX_FREQ_POLICY);
+
+	val = readl(pll->base + IPROC_CLK_POLICY_FREQ_OFFSET);
+	fid = (val >> (IPROC_CLK_POLICY_FREQ_POLICY_FREQ_SHIFT * policy)) &
+		IPROC_CLK_POLICY_FREQ_POLICY_FREQ_MASK;
+
+	val = readl(pll->base + IPROC_CLK_POLICY_DBG_OFFSET);
+	active_fid = IPROC_CLK_POLICY_DBG_ACT_FREQ_MASK &
+		(val >> IPROC_CLK_POLICY_DBG_ACT_FREQ_SHIFT);
+	if (fid != active_fid) {
+		pr_debug("%s: fid override %u->%u\n", __func__,	fid,
+				active_fid);
+		fid = active_fid;
+	}
+
+	pr_debug("%s: active fid: %u\n", __func__, fid);
+
+	return fid;
+}
+
+/*
+ * Determine the mdiv (post divider) based on the frequency ID being used.
+ * There are 4 sources that can be used to derive the output clock rate:
+ *    - 25 MHz Crystal
+ *    - System clock
+ *    - PLL channel 0 (slow clock)
+ *    - PLL channel 1 (fast clock)
+ */
+static int __get_mdiv(struct iproc_arm_pll *pll)
+{
+	unsigned int fid;
+	int mdiv;
+	u32 val;
+
+	fid = __get_fid(pll);
+
+	switch (fid) {
+	case ARM_PLL_FID_CRYSTAL_CLK:
+	case ARM_PLL_FID_SYS_CLK:
+		mdiv = 1;
+		break;
+
+	case ARM_PLL_FID_CH0_SLOW_CLK:
+		val = readl(pll->base + IPROC_CLK_PLLARMC_OFFSET);
+		mdiv = val & IPROC_CLK_PLLARMC_MDIV_MASK;
+		if (mdiv == 0)
+			mdiv = 256;
+		break;
+
+	case ARM_PLL_FID_CH1_FAST_CLK:
+		val = readl(pll->base +	IPROC_CLK_PLLARMCTL5_OFFSET);
+		mdiv = val & IPROC_CLK_PLLARMCTL5_H_MDIV_MASK;
+		if (mdiv == 0)
+			mdiv = 256;
+		break;
+
+	default:
+		mdiv = -EFAULT;
+	}
+
+	return mdiv;
+}
+
+static unsigned int __get_ndiv(struct iproc_arm_pll *pll)
+{
+	u32 val;
+	unsigned int ndiv_int, ndiv_frac, ndiv;
+
+	val = readl(pll->base + IPROC_CLK_PLLARM_OFFSET_OFFSET);
+	if (val & (1 << IPROC_CLK_PLLARM_SW_CTL_SHIFT)) {
+		/*
+		 * offset mode is active. Read the ndiv from the PLLARM OFFSET
+		 * register
+		 */
+		ndiv_int = (val >> IPROC_CLK_PLLARM_NDIV_INT_OFFSET_SHIFT) &
+			IPROC_CLK_PLLARM_NDIV_INT_OFFSET_MASK;
+		if (ndiv_int == 0)
+			ndiv_int = 256;
+
+		ndiv_frac = val & IPROC_CLK_PLLARM_NDIV_FRAC_OFFSET_MASK;
+	} else {
+		/* offset mode not active */
+		val = readl(pll->base + IPROC_CLK_PLLARMA_OFFSET);
+		ndiv_int = (val >> IPROC_CLK_PLLARMA_NDIV_INT_SHIFT) &
+			IPROC_CLK_PLLARMA_NDIV_INT_MASK;
+		if (ndiv_int == 0)
+			ndiv_int = 1024;
+
+		val = readl(pll->base + IPROC_CLK_PLLARMB_OFFSET);
+		ndiv_frac = val & IPROC_CLK_PLLARMB_NDIV_FRAC_MASK;
+	}
+
+	ndiv = (ndiv_int << 20) | ndiv_frac;
+
+	return ndiv;
+}
+
+/*
+ * The output frequency of the ARM PLL is calculated based on the ARM PLL
+ * divider values:
+ *   pdiv = ARM PLL pre-divider
+ *   ndiv = ARM PLL multiplier
+ *   mdiv = ARM PLL post divider
+ *
+ * The frequency is calculated by:
+ *   ((ndiv * parent clock rate) / pdiv) / mdiv
+ */
+static unsigned long iproc_arm_pll_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct iproc_arm_pll *pll = to_iproc_arm_pll(hw);
+	u32 val;
+	int mdiv;
+	u64 ndiv;
+	unsigned int pdiv;
+
+	/* in bypass mode, use parent rate */
+	val = readl(pll->base + IPROC_CLK_PLLARMC_OFFSET);
+	if (val & (1 << IPROC_CLK_PLLARMC_BYPCLK_EN_SHIFT)) {
+		pll->rate = parent_rate;
+		return pll->rate;
+	}
+
+	/* PLL needs to be locked */
+	val = readl(pll->base + IPROC_CLK_PLLARMA_OFFSET);
+	if (!(val & (1 << IPROC_CLK_PLLARMA_LOCK_SHIFT))) {
+		pll->rate = 0;
+		return 0;
+	}
+
+	pdiv = (val >> IPROC_CLK_PLLARMA_PDIV_SHIFT) &
+		IPROC_CLK_PLLARMA_PDIV_MASK;
+	if (pdiv == 0)
+		pdiv = 16;
+
+	ndiv = __get_ndiv(pll);
+	mdiv = __get_mdiv(pll);
+	if (mdiv <= 0) {
+		pll->rate = 0;
+		return 0;
+	}
+	pll->rate = (ndiv * parent_rate) >> 20;
+	pll->rate = (pll->rate / pdiv) / mdiv;
+
+	pr_debug("%s: ARM PLL rate: %lu. parent rate: %lu\n", __func__,
+		 pll->rate, parent_rate);
+	pr_debug("%s: ndiv_int: %u, pdiv: %u, mdiv: %d\n", __func__,
+		 (unsigned int)(ndiv >> 20), pdiv, mdiv);
+
+	return pll->rate;
+}
+
+static const struct clk_ops iproc_arm_pll_ops = {
+	.recalc_rate = iproc_arm_pll_recalc_rate,
+};
+
+void __init iproc_armpll_setup(struct device_node *node)
+{
+	int ret;
+	struct iproc_arm_pll *pll;
+	struct clk_init_data init;
+	const char *parent_name;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (WARN_ON(!pll))
+		return;
+
+	pll->base = of_iomap(node, 0);
+	if (WARN_ON(!pll->base))
+		goto err_free_pll;
+
+	init.name = node->name;
+	init.ops = &iproc_arm_pll_ops;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+	pll->hw.init = &init;
+
+	ret = clk_hw_register(NULL, &pll->hw);
+	if (WARN_ON(ret))
+		goto err_iounmap;
+
+	ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll->hw);
+	if (WARN_ON(ret))
+		goto err_clk_unregister;
+
+	return;
+
+err_clk_unregister:
+	clk_hw_unregister(&pll->hw);
+err_iounmap:
+	iounmap(pll->base);
+err_free_pll:
+	kfree(pll);
+}
diff --git a/drivers/clk/bcm/clk-iproc-asiu.c b/drivers/clk/bcm/clk-iproc-asiu.c
new file mode 100644
index 000000000..e062dd499
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-asiu.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include "clk-iproc.h"
+
+struct iproc_asiu;
+
+struct iproc_asiu_clk {
+	struct clk_hw hw;
+	const char *name;
+	struct iproc_asiu *asiu;
+	unsigned long rate;
+	struct iproc_asiu_div div;
+	struct iproc_asiu_gate gate;
+};
+
+struct iproc_asiu {
+	void __iomem *div_base;
+	void __iomem *gate_base;
+
+	struct clk_hw_onecell_data *clk_data;
+	struct iproc_asiu_clk *clks;
+};
+
+#define to_asiu_clk(hw) container_of(hw, struct iproc_asiu_clk, hw)
+
+static int iproc_asiu_clk_enable(struct clk_hw *hw)
+{
+	struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+	struct iproc_asiu *asiu = clk->asiu;
+	u32 val;
+
+	/* some clocks at the ASIU level are always enabled */
+	if (clk->gate.offset == IPROC_CLK_INVALID_OFFSET)
+		return 0;
+
+	val = readl(asiu->gate_base + clk->gate.offset);
+	val |= (1 << clk->gate.en_shift);
+	writel(val, asiu->gate_base + clk->gate.offset);
+
+	return 0;
+}
+
+static void iproc_asiu_clk_disable(struct clk_hw *hw)
+{
+	struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+	struct iproc_asiu *asiu = clk->asiu;
+	u32 val;
+
+	/* some clocks at the ASIU level are always enabled */
+	if (clk->gate.offset == IPROC_CLK_INVALID_OFFSET)
+		return;
+
+	val = readl(asiu->gate_base + clk->gate.offset);
+	val &= ~(1 << clk->gate.en_shift);
+	writel(val, asiu->gate_base + clk->gate.offset);
+}
+
+static unsigned long iproc_asiu_clk_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+	struct iproc_asiu *asiu = clk->asiu;
+	u32 val;
+	unsigned int div_h, div_l;
+
+	if (parent_rate == 0) {
+		clk->rate = 0;
+		return 0;
+	}
+
+	/* if clock divisor is not enabled, simply return parent rate */
+	val = readl(asiu->div_base + clk->div.offset);
+	if ((val & (1 << clk->div.en_shift)) == 0) {
+		clk->rate = parent_rate;
+		return parent_rate;
+	}
+
+	/* clock rate = parent rate / (high_div + 1) + (low_div + 1) */
+	div_h = (val >> clk->div.high_shift) & bit_mask(clk->div.high_width);
+	div_h++;
+	div_l = (val >> clk->div.low_shift) & bit_mask(clk->div.low_width);
+	div_l++;
+
+	clk->rate = parent_rate / (div_h + div_l);
+	pr_debug("%s: rate: %lu. parent rate: %lu div_h: %u div_l: %u\n",
+		 __func__, clk->rate, parent_rate, div_h, div_l);
+
+	return clk->rate;
+}
+
+static long iproc_asiu_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				      unsigned long *parent_rate)
+{
+	unsigned int div;
+
+	if (rate == 0 || *parent_rate == 0)
+		return -EINVAL;
+
+	if (rate == *parent_rate)
+		return *parent_rate;
+
+	div = DIV_ROUND_CLOSEST(*parent_rate, rate);
+	if (div < 2)
+		return *parent_rate;
+
+	return *parent_rate / div;
+}
+
+static int iproc_asiu_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct iproc_asiu_clk *clk = to_asiu_clk(hw);
+	struct iproc_asiu *asiu = clk->asiu;
+	unsigned int div, div_h, div_l;
+	u32 val;
+
+	if (rate == 0 || parent_rate == 0)
+		return -EINVAL;
+
+	/* simply disable the divisor if one wants the same rate as parent */
+	if (rate == parent_rate) {
+		val = readl(asiu->div_base + clk->div.offset);
+		val &= ~(1 << clk->div.en_shift);
+		writel(val, asiu->div_base + clk->div.offset);
+		return 0;
+	}
+
+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
+	if (div < 2)
+		return -EINVAL;
+
+	div_h = div_l = div >> 1;
+	div_h--;
+	div_l--;
+
+	val = readl(asiu->div_base + clk->div.offset);
+	val |= 1 << clk->div.en_shift;
+	if (div_h) {
+		val &= ~(bit_mask(clk->div.high_width)
+			 << clk->div.high_shift);
+		val |= div_h << clk->div.high_shift;
+	} else {
+		val &= ~(bit_mask(clk->div.high_width)
+			 << clk->div.high_shift);
+	}
+	if (div_l) {
+		val &= ~(bit_mask(clk->div.low_width) << clk->div.low_shift);
+		val |= div_l << clk->div.low_shift;
+	} else {
+		val &= ~(bit_mask(clk->div.low_width) << clk->div.low_shift);
+	}
+	writel(val, asiu->div_base + clk->div.offset);
+
+	return 0;
+}
+
+static const struct clk_ops iproc_asiu_ops = {
+	.enable = iproc_asiu_clk_enable,
+	.disable = iproc_asiu_clk_disable,
+	.recalc_rate = iproc_asiu_clk_recalc_rate,
+	.round_rate = iproc_asiu_clk_round_rate,
+	.set_rate = iproc_asiu_clk_set_rate,
+};
+
+void __init iproc_asiu_setup(struct device_node *node,
+			     const struct iproc_asiu_div *div,
+			     const struct iproc_asiu_gate *gate,
+			     unsigned int num_clks)
+{
+	int i, ret;
+	struct iproc_asiu *asiu;
+
+	if (WARN_ON(!gate || !div))
+		return;
+
+	asiu = kzalloc(sizeof(*asiu), GFP_KERNEL);
+	if (WARN_ON(!asiu))
+		return;
+
+	asiu->clk_data = kzalloc(struct_size(asiu->clk_data, hws, num_clks),
+				 GFP_KERNEL);
+	if (WARN_ON(!asiu->clk_data))
+		goto err_clks;
+	asiu->clk_data->num = num_clks;
+
+	asiu->clks = kcalloc(num_clks, sizeof(*asiu->clks), GFP_KERNEL);
+	if (WARN_ON(!asiu->clks))
+		goto err_asiu_clks;
+
+	asiu->div_base = of_iomap(node, 0);
+	if (WARN_ON(!asiu->div_base))
+		goto err_iomap_div;
+
+	asiu->gate_base = of_iomap(node, 1);
+	if (WARN_ON(!asiu->gate_base))
+		goto err_iomap_gate;
+
+	for (i = 0; i < num_clks; i++) {
+		struct clk_init_data init;
+		const char *parent_name;
+		struct iproc_asiu_clk *asiu_clk;
+		const char *clk_name;
+
+		ret = of_property_read_string_index(node, "clock-output-names",
+						    i, &clk_name);
+		if (WARN_ON(ret))
+			goto err_clk_register;
+
+		asiu_clk = &asiu->clks[i];
+		asiu_clk->name = clk_name;
+		asiu_clk->asiu = asiu;
+		asiu_clk->div = div[i];
+		asiu_clk->gate = gate[i];
+		init.name = clk_name;
+		init.ops = &iproc_asiu_ops;
+		init.flags = 0;
+		parent_name = of_clk_get_parent_name(node, 0);
+		init.parent_names = (parent_name ? &parent_name : NULL);
+		init.num_parents = (parent_name ? 1 : 0);
+		asiu_clk->hw.init = &init;
+
+		ret = clk_hw_register(NULL, &asiu_clk->hw);
+		if (WARN_ON(ret))
+			goto err_clk_register;
+		asiu->clk_data->hws[i] = &asiu_clk->hw;
+	}
+
+	ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get,
+				     asiu->clk_data);
+	if (WARN_ON(ret))
+		goto err_clk_register;
+
+	return;
+
+err_clk_register:
+	while (--i >= 0)
+		clk_hw_unregister(asiu->clk_data->hws[i]);
+	iounmap(asiu->gate_base);
+
+err_iomap_gate:
+	iounmap(asiu->div_base);
+
+err_iomap_div:
+	kfree(asiu->clks);
+
+err_asiu_clks:
+	kfree(asiu->clk_data);
+
+err_clks:
+	kfree(asiu);
+}
diff --git a/drivers/clk/bcm/clk-iproc-pll.c b/drivers/clk/bcm/clk-iproc-pll.c
new file mode 100644
index 000000000..8f0619f36
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc-pll.c
@@ -0,0 +1,873 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+
+#include "clk-iproc.h"
+
+#define PLL_VCO_HIGH_SHIFT 19
+#define PLL_VCO_LOW_SHIFT  30
+
+/*
+ * PLL MACRO_SELECT modes 0 to 5 choose pre-calculated PLL output frequencies
+ * from a look-up table. Mode 7 allows user to manipulate PLL clock dividers
+ */
+#define PLL_USER_MODE 7
+
+/* number of delay loops waiting for PLL to lock */
+#define LOCK_DELAY 100
+
+/* number of VCO frequency bands */
+#define NUM_FREQ_BANDS 8
+
+#define NUM_KP_BANDS 3
+enum kp_band {
+	KP_BAND_MID = 0,
+	KP_BAND_HIGH,
+	KP_BAND_HIGH_HIGH
+};
+
+static const unsigned int kp_table[NUM_KP_BANDS][NUM_FREQ_BANDS] = {
+	{ 5, 6, 6, 7, 7, 8, 9, 10 },
+	{ 4, 4, 5, 5, 6, 7, 8, 9  },
+	{ 4, 5, 5, 6, 7, 8, 9, 10 },
+};
+
+static const unsigned long ref_freq_table[NUM_FREQ_BANDS][2] = {
+	{ 10000000,  12500000  },
+	{ 12500000,  15000000  },
+	{ 15000000,  20000000  },
+	{ 20000000,  25000000  },
+	{ 25000000,  50000000  },
+	{ 50000000,  75000000  },
+	{ 75000000,  100000000 },
+	{ 100000000, 125000000 },
+};
+
+enum vco_freq_range {
+	VCO_LOW       = 700000000U,
+	VCO_MID       = 1200000000U,
+	VCO_HIGH      = 2200000000U,
+	VCO_HIGH_HIGH = 3100000000U,
+	VCO_MAX       = 4000000000U,
+};
+
+struct iproc_pll {
+	void __iomem *status_base;
+	void __iomem *control_base;
+	void __iomem *pwr_base;
+	void __iomem *asiu_base;
+
+	const struct iproc_pll_ctrl *ctrl;
+	const struct iproc_pll_vco_param *vco_param;
+	unsigned int num_vco_entries;
+};
+
+struct iproc_clk {
+	struct clk_hw hw;
+	struct iproc_pll *pll;
+	const struct iproc_clk_ctrl *ctrl;
+};
+
+#define to_iproc_clk(hw) container_of(hw, struct iproc_clk, hw)
+
+static int pll_calc_param(unsigned long target_rate,
+			unsigned long parent_rate,
+			struct iproc_pll_vco_param *vco_out)
+{
+	u64 ndiv_int, ndiv_frac, residual;
+
+	ndiv_int = target_rate / parent_rate;
+
+	if (!ndiv_int || (ndiv_int > 255))
+		return -EINVAL;
+
+	residual = target_rate - (ndiv_int * parent_rate);
+	residual <<= 20;
+
+	/*
+	 * Add half of the divisor so the result will be rounded to closest
+	 * instead of rounded down.
+	 */
+	residual += (parent_rate / 2);
+	ndiv_frac = div64_u64((u64)residual, (u64)parent_rate);
+
+	vco_out->ndiv_int = ndiv_int;
+	vco_out->ndiv_frac = ndiv_frac;
+	vco_out->pdiv = 1;
+
+	vco_out->rate = vco_out->ndiv_int * parent_rate;
+	residual = (u64)vco_out->ndiv_frac * (u64)parent_rate;
+	residual >>= 20;
+	vco_out->rate += residual;
+
+	return 0;
+}
+
+/*
+ * Based on the target frequency, find a match from the VCO frequency parameter
+ * table and return its index
+ */
+static int pll_get_rate_index(struct iproc_pll *pll, unsigned int target_rate)
+{
+	int i;
+
+	for (i = 0; i < pll->num_vco_entries; i++)
+		if (target_rate == pll->vco_param[i].rate)
+			break;
+
+	if (i >= pll->num_vco_entries)
+		return -EINVAL;
+
+	return i;
+}
+
+static int get_kp(unsigned long ref_freq, enum kp_band kp_index)
+{
+	int i;
+
+	if (ref_freq < ref_freq_table[0][0])
+		return -EINVAL;
+
+	for (i = 0; i < NUM_FREQ_BANDS; i++) {
+		if (ref_freq >= ref_freq_table[i][0] &&
+		    ref_freq < ref_freq_table[i][1])
+			return kp_table[kp_index][i];
+	}
+	return -EINVAL;
+}
+
+static int pll_wait_for_lock(struct iproc_pll *pll)
+{
+	int i;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	for (i = 0; i < LOCK_DELAY; i++) {
+		u32 val = readl(pll->status_base + ctrl->status.offset);
+
+		if (val & (1 << ctrl->status.shift))
+			return 0;
+		udelay(10);
+	}
+
+	return -EIO;
+}
+
+static void iproc_pll_write(const struct iproc_pll *pll, void __iomem *base,
+			    const u32 offset, u32 val)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	writel(val, base + offset);
+
+	if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK &&
+		     (base == pll->status_base || base == pll->control_base)))
+		val = readl(base + offset);
+}
+
+static void __pll_disable(struct iproc_pll *pll)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+
+	if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+		val = readl(pll->asiu_base + ctrl->asiu.offset);
+		val &= ~(1 << ctrl->asiu.en_shift);
+		iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val);
+	}
+
+	if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
+		val = readl(pll->control_base + ctrl->aon.offset);
+		val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
+		iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
+	}
+
+	if (pll->pwr_base) {
+		/* latch input value so core power can be shut down */
+		val = readl(pll->pwr_base + ctrl->aon.offset);
+		val |= 1 << ctrl->aon.iso_shift;
+		iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+
+		/* power down the core */
+		val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+		iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+	}
+}
+
+static int __pll_enable(struct iproc_pll *pll)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+
+	if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
+		val = readl(pll->control_base + ctrl->aon.offset);
+		val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+		iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
+	}
+
+	if (pll->pwr_base) {
+		/* power up the PLL and make sure it's not latched */
+		val = readl(pll->pwr_base + ctrl->aon.offset);
+		val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
+		val &= ~(1 << ctrl->aon.iso_shift);
+		iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+	}
+
+	/* certain PLLs also need to be ungated from the ASIU top level */
+	if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+		val = readl(pll->asiu_base + ctrl->asiu.offset);
+		val |= (1 << ctrl->asiu.en_shift);
+		iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val);
+	}
+
+	return 0;
+}
+
+static void __pll_put_in_reset(struct iproc_pll *pll)
+{
+	u32 val;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+
+	val = readl(pll->control_base + reset->offset);
+	if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW)
+		val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift);
+	else
+		val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift));
+	iproc_pll_write(pll, pll->control_base, reset->offset, val);
+}
+
+static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
+				  unsigned int ka, unsigned int ki)
+{
+	u32 val;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+	const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
+
+	val = readl(pll->control_base + dig_filter->offset);
+	val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
+		bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
+		bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
+	val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
+	       ka << dig_filter->ka_shift;
+	iproc_pll_write(pll, pll->control_base, dig_filter->offset, val);
+
+	val = readl(pll->control_base + reset->offset);
+	if (ctrl->flags & IPROC_CLK_PLL_RESET_ACTIVE_LOW)
+		val &= ~(BIT(reset->reset_shift) | BIT(reset->p_reset_shift));
+	else
+		val |= BIT(reset->reset_shift) | BIT(reset->p_reset_shift);
+	iproc_pll_write(pll, pll->control_base, reset->offset, val);
+}
+
+/*
+ * Determines if the change to be applied to the PLL is minor (just an update
+ * or the fractional divider). If so, then we can avoid going through a
+ * disruptive reset and lock sequence.
+ */
+static bool pll_fractional_change_only(struct iproc_pll *pll,
+				       struct iproc_pll_vco_param *vco)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+	u32 ndiv_int;
+	unsigned int pdiv;
+
+	/* PLL needs to be locked */
+	val = readl(pll->status_base + ctrl->status.offset);
+	if ((val & (1 << ctrl->status.shift)) == 0)
+		return false;
+
+	val = readl(pll->control_base + ctrl->ndiv_int.offset);
+	ndiv_int = (val >> ctrl->ndiv_int.shift) &
+		bit_mask(ctrl->ndiv_int.width);
+
+	if (ndiv_int != vco->ndiv_int)
+		return false;
+
+	val = readl(pll->control_base + ctrl->pdiv.offset);
+	pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
+
+	if (pdiv != vco->pdiv)
+		return false;
+
+	return true;
+}
+
+static int pll_set_rate(struct iproc_clk *clk, struct iproc_pll_vco_param *vco,
+			unsigned long parent_rate)
+{
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	int ka = 0, ki, kp, ret;
+	unsigned long rate = vco->rate;
+	u32 val;
+	enum kp_band kp_index;
+	unsigned long ref_freq;
+	const char *clk_name = clk_hw_get_name(&clk->hw);
+
+	/*
+	 * reference frequency = parent frequency / PDIV
+	 * If PDIV = 0, then it becomes a multiplier (x2)
+	 */
+	if (vco->pdiv == 0)
+		ref_freq = parent_rate * 2;
+	else
+		ref_freq = parent_rate / vco->pdiv;
+
+	/* determine Ki and Kp index based on target VCO frequency */
+	if (rate >= VCO_LOW && rate < VCO_HIGH) {
+		ki = 4;
+		kp_index = KP_BAND_MID;
+	} else if (rate >= VCO_HIGH && rate < VCO_HIGH_HIGH) {
+		ki = 3;
+		kp_index = KP_BAND_HIGH;
+	} else if (rate >= VCO_HIGH_HIGH && rate < VCO_MAX) {
+		ki = 3;
+		kp_index = KP_BAND_HIGH_HIGH;
+	} else {
+		pr_err("%s: pll: %s has invalid rate: %lu\n", __func__,
+				clk_name, rate);
+		return -EINVAL;
+	}
+
+	kp = get_kp(ref_freq, kp_index);
+	if (kp < 0) {
+		pr_err("%s: pll: %s has invalid kp\n", __func__, clk_name);
+		return kp;
+	}
+
+	ret = __pll_enable(pll);
+	if (ret) {
+		pr_err("%s: pll: %s fails to enable\n", __func__, clk_name);
+		return ret;
+	}
+
+	if (pll_fractional_change_only(clk->pll, vco)) {
+		/* program fractional part of NDIV */
+		if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+			val = readl(pll->control_base + ctrl->ndiv_frac.offset);
+			val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
+				 ctrl->ndiv_frac.shift);
+			val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
+			iproc_pll_write(pll, pll->control_base,
+					ctrl->ndiv_frac.offset, val);
+			return 0;
+		}
+	}
+
+	/* put PLL in reset */
+	__pll_put_in_reset(pll);
+
+	/* set PLL in user mode before modifying PLL controls */
+	if (ctrl->flags & IPROC_CLK_PLL_USER_MODE_ON) {
+		val = readl(pll->control_base + ctrl->macro_mode.offset);
+		val &= ~(bit_mask(ctrl->macro_mode.width) <<
+			ctrl->macro_mode.shift);
+		val |= PLL_USER_MODE << ctrl->macro_mode.shift;
+		iproc_pll_write(pll, pll->control_base,
+			ctrl->macro_mode.offset, val);
+	}
+
+	iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0);
+
+	val = readl(pll->control_base + ctrl->vco_ctrl.l_offset);
+
+	if (rate >= VCO_LOW && rate < VCO_MID)
+		val |= (1 << PLL_VCO_LOW_SHIFT);
+
+	if (rate < VCO_HIGH)
+		val &= ~(1 << PLL_VCO_HIGH_SHIFT);
+	else
+		val |= (1 << PLL_VCO_HIGH_SHIFT);
+
+	iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.l_offset, val);
+
+	/* program integer part of NDIV */
+	val = readl(pll->control_base + ctrl->ndiv_int.offset);
+	val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
+	val |= vco->ndiv_int << ctrl->ndiv_int.shift;
+	iproc_pll_write(pll, pll->control_base, ctrl->ndiv_int.offset, val);
+
+	/* program fractional part of NDIV */
+	if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+		val = readl(pll->control_base + ctrl->ndiv_frac.offset);
+		val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
+			 ctrl->ndiv_frac.shift);
+		val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
+		iproc_pll_write(pll, pll->control_base, ctrl->ndiv_frac.offset,
+				val);
+	}
+
+	/* program PDIV */
+	val = readl(pll->control_base + ctrl->pdiv.offset);
+	val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
+	val |= vco->pdiv << ctrl->pdiv.shift;
+	iproc_pll_write(pll, pll->control_base, ctrl->pdiv.offset, val);
+
+	__pll_bring_out_reset(pll, kp, ka, ki);
+
+	ret = pll_wait_for_lock(pll);
+	if (ret < 0) {
+		pr_err("%s: pll: %s failed to lock\n", __func__, clk_name);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int iproc_pll_enable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+
+	return __pll_enable(pll);
+}
+
+static void iproc_pll_disable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	if (ctrl->flags & IPROC_CLK_AON)
+		return;
+
+	__pll_disable(pll);
+}
+
+static unsigned long iproc_pll_recalc_rate(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	u32 val;
+	u64 ndiv, ndiv_int, ndiv_frac;
+	unsigned int pdiv;
+	unsigned long rate;
+
+	if (parent_rate == 0)
+		return 0;
+
+	/* PLL needs to be locked */
+	val = readl(pll->status_base + ctrl->status.offset);
+	if ((val & (1 << ctrl->status.shift)) == 0)
+		return 0;
+
+	/*
+	 * PLL output frequency =
+	 *
+	 * ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv)
+	 */
+	val = readl(pll->control_base + ctrl->ndiv_int.offset);
+	ndiv_int = (val >> ctrl->ndiv_int.shift) &
+		bit_mask(ctrl->ndiv_int.width);
+	ndiv = ndiv_int << 20;
+
+	if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+		val = readl(pll->control_base + ctrl->ndiv_frac.offset);
+		ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
+			bit_mask(ctrl->ndiv_frac.width);
+		ndiv += ndiv_frac;
+	}
+
+	val = readl(pll->control_base + ctrl->pdiv.offset);
+	pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
+
+	rate = (ndiv * parent_rate) >> 20;
+
+	if (pdiv == 0)
+		rate *= 2;
+	else
+		rate /= pdiv;
+
+	return rate;
+}
+
+static int iproc_pll_determine_rate(struct clk_hw *hw,
+		struct clk_rate_request *req)
+{
+	unsigned int  i;
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	unsigned long  diff, best_diff;
+	unsigned int  best_idx = 0;
+	int ret;
+
+	if (req->rate == 0 || req->best_parent_rate == 0)
+		return -EINVAL;
+
+	if (ctrl->flags & IPROC_CLK_PLL_CALC_PARAM) {
+		struct iproc_pll_vco_param vco_param;
+
+		ret = pll_calc_param(req->rate, req->best_parent_rate,
+					&vco_param);
+		if (ret)
+			return ret;
+
+		req->rate = vco_param.rate;
+		return 0;
+	}
+
+	if (!pll->vco_param)
+		return -EINVAL;
+
+	best_diff = ULONG_MAX;
+	for (i = 0; i < pll->num_vco_entries; i++) {
+		diff = abs(req->rate - pll->vco_param[i].rate);
+		if (diff <= best_diff) {
+			best_diff = diff;
+			best_idx = i;
+		}
+		/* break now if perfect match */
+		if (diff == 0)
+			break;
+	}
+
+	req->rate = pll->vco_param[best_idx].rate;
+
+	return 0;
+}
+
+static int iproc_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	struct iproc_pll *pll = clk->pll;
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+	struct iproc_pll_vco_param vco_param;
+	int rate_index, ret;
+
+	if (ctrl->flags & IPROC_CLK_PLL_CALC_PARAM) {
+		ret = pll_calc_param(rate, parent_rate, &vco_param);
+		if (ret)
+			return ret;
+	} else {
+		rate_index = pll_get_rate_index(pll, rate);
+		if (rate_index < 0)
+			return rate_index;
+
+		vco_param = pll->vco_param[rate_index];
+	}
+
+	ret = pll_set_rate(clk, &vco_param, parent_rate);
+	return ret;
+}
+
+static const struct clk_ops iproc_pll_ops = {
+	.enable = iproc_pll_enable,
+	.disable = iproc_pll_disable,
+	.recalc_rate = iproc_pll_recalc_rate,
+	.determine_rate = iproc_pll_determine_rate,
+	.set_rate = iproc_pll_set_rate,
+};
+
+static int iproc_clk_enable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+
+	/* channel enable is active low */
+	val = readl(pll->control_base + ctrl->enable.offset);
+	val &= ~(1 << ctrl->enable.enable_shift);
+	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
+
+	/* also make sure channel is not held */
+	val = readl(pll->control_base + ctrl->enable.offset);
+	val &= ~(1 << ctrl->enable.hold_shift);
+	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
+
+	return 0;
+}
+
+static void iproc_clk_disable(struct clk_hw *hw)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+
+	if (ctrl->flags & IPROC_CLK_AON)
+		return;
+
+	val = readl(pll->control_base + ctrl->enable.offset);
+	val |= 1 << ctrl->enable.enable_shift;
+	iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
+}
+
+static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
+		unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+	unsigned int mdiv;
+	unsigned long rate;
+
+	if (parent_rate == 0)
+		return 0;
+
+	val = readl(pll->control_base + ctrl->mdiv.offset);
+	mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width);
+	if (mdiv == 0)
+		mdiv = 256;
+
+	if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2)
+		rate = parent_rate / (mdiv * 2);
+	else
+		rate = parent_rate / mdiv;
+
+	return rate;
+}
+
+static int iproc_clk_determine_rate(struct clk_hw *hw,
+		struct clk_rate_request *req)
+{
+	unsigned int bestdiv;
+
+	if (req->rate == 0)
+		return -EINVAL;
+	if (req->rate == req->best_parent_rate)
+		return 0;
+
+	bestdiv = DIV_ROUND_CLOSEST(req->best_parent_rate, req->rate);
+	if (bestdiv < 2)
+		req->rate = req->best_parent_rate;
+
+	if (bestdiv > 256)
+		bestdiv = 256;
+
+	req->rate = req->best_parent_rate / bestdiv;
+
+	return 0;
+}
+
+static int iproc_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+		unsigned long parent_rate)
+{
+	struct iproc_clk *clk = to_iproc_clk(hw);
+	const struct iproc_clk_ctrl *ctrl = clk->ctrl;
+	struct iproc_pll *pll = clk->pll;
+	u32 val;
+	unsigned int div;
+
+	if (rate == 0 || parent_rate == 0)
+		return -EINVAL;
+
+	div = DIV_ROUND_CLOSEST(parent_rate, rate);
+	if (ctrl->flags & IPROC_CLK_MCLK_DIV_BY_2)
+		div /=  2;
+
+	if (div > 256)
+		return -EINVAL;
+
+	val = readl(pll->control_base + ctrl->mdiv.offset);
+	if (div == 256) {
+		val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+	} else {
+		val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+		val |= div << ctrl->mdiv.shift;
+	}
+	iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val);
+
+	return 0;
+}
+
+static const struct clk_ops iproc_clk_ops = {
+	.enable = iproc_clk_enable,
+	.disable = iproc_clk_disable,
+	.recalc_rate = iproc_clk_recalc_rate,
+	.determine_rate = iproc_clk_determine_rate,
+	.set_rate = iproc_clk_set_rate,
+};
+
+/**
+ * Some PLLs require the PLL SW override bit to be set before changes can be
+ * applied to the PLL
+ */
+static void iproc_pll_sw_cfg(struct iproc_pll *pll)
+{
+	const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+	if (ctrl->flags & IPROC_CLK_PLL_NEEDS_SW_CFG) {
+		u32 val;
+
+		val = readl(pll->control_base + ctrl->sw_ctrl.offset);
+		val |= BIT(ctrl->sw_ctrl.shift);
+		iproc_pll_write(pll, pll->control_base, ctrl->sw_ctrl.offset,
+				val);
+	}
+}
+
+void iproc_pll_clk_setup(struct device_node *node,
+			 const struct iproc_pll_ctrl *pll_ctrl,
+			 const struct iproc_pll_vco_param *vco,
+			 unsigned int num_vco_entries,
+			 const struct iproc_clk_ctrl *clk_ctrl,
+			 unsigned int num_clks)
+{
+	int i, ret;
+	struct iproc_pll *pll;
+	struct iproc_clk *iclk;
+	struct clk_init_data init;
+	const char *parent_name;
+	struct iproc_clk *iclk_array;
+	struct clk_hw_onecell_data *clk_data;
+	const char *clk_name;
+
+	if (WARN_ON(!pll_ctrl) || WARN_ON(!clk_ctrl))
+		return;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (WARN_ON(!pll))
+		return;
+
+	clk_data = kzalloc(struct_size(clk_data, hws, num_clks), GFP_KERNEL);
+	if (WARN_ON(!clk_data))
+		goto err_clk_data;
+	clk_data->num = num_clks;
+
+	iclk_array = kcalloc(num_clks, sizeof(struct iproc_clk), GFP_KERNEL);
+	if (WARN_ON(!iclk_array))
+		goto err_clks;
+
+	pll->control_base = of_iomap(node, 0);
+	if (WARN_ON(!pll->control_base))
+		goto err_pll_iomap;
+
+	/* Some SoCs do not require the pwr_base, thus failing is not fatal */
+	pll->pwr_base = of_iomap(node, 1);
+
+	/* some PLLs require gating control at the top ASIU level */
+	if (pll_ctrl->flags & IPROC_CLK_PLL_ASIU) {
+		pll->asiu_base = of_iomap(node, 2);
+		if (WARN_ON(!pll->asiu_base))
+			goto err_asiu_iomap;
+	}
+
+	if (pll_ctrl->flags & IPROC_CLK_PLL_SPLIT_STAT_CTRL) {
+		/* Some SoCs have a split status/control.  If this does not
+		 * exist, assume they are unified.
+		 */
+		pll->status_base = of_iomap(node, 2);
+		if (!pll->status_base)
+			goto err_status_iomap;
+	} else
+		pll->status_base = pll->control_base;
+
+	/* initialize and register the PLL itself */
+	pll->ctrl = pll_ctrl;
+
+	iclk = &iclk_array[0];
+	iclk->pll = pll;
+
+	ret = of_property_read_string_index(node, "clock-output-names",
+					    0, &clk_name);
+	if (WARN_ON(ret))
+		goto err_pll_register;
+
+	init.name = clk_name;
+	init.ops = &iproc_pll_ops;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+	iclk->hw.init = &init;
+
+	if (vco) {
+		pll->num_vco_entries = num_vco_entries;
+		pll->vco_param = vco;
+	}
+
+	iproc_pll_sw_cfg(pll);
+
+	ret = clk_hw_register(NULL, &iclk->hw);
+	if (WARN_ON(ret))
+		goto err_pll_register;
+
+	clk_data->hws[0] = &iclk->hw;
+	parent_name = clk_name;
+
+	/* now initialize and register all leaf clocks */
+	for (i = 1; i < num_clks; i++) {
+		memset(&init, 0, sizeof(init));
+
+		ret = of_property_read_string_index(node, "clock-output-names",
+						    i, &clk_name);
+		if (WARN_ON(ret))
+			goto err_clk_register;
+
+		iclk = &iclk_array[i];
+		iclk->pll = pll;
+		iclk->ctrl = &clk_ctrl[i];
+
+		init.name = clk_name;
+		init.ops = &iproc_clk_ops;
+		init.flags = 0;
+		init.parent_names = (parent_name ? &parent_name : NULL);
+		init.num_parents = (parent_name ? 1 : 0);
+		iclk->hw.init = &init;
+
+		ret = clk_hw_register(NULL, &iclk->hw);
+		if (WARN_ON(ret))
+			goto err_clk_register;
+
+		clk_data->hws[i] = &iclk->hw;
+	}
+
+	ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
+	if (WARN_ON(ret))
+		goto err_clk_register;
+
+	return;
+
+err_clk_register:
+	while (--i >= 0)
+		clk_hw_unregister(clk_data->hws[i]);
+
+err_pll_register:
+	if (pll->status_base != pll->control_base)
+		iounmap(pll->status_base);
+
+err_status_iomap:
+	if (pll->asiu_base)
+		iounmap(pll->asiu_base);
+
+err_asiu_iomap:
+	if (pll->pwr_base)
+		iounmap(pll->pwr_base);
+
+	iounmap(pll->control_base);
+
+err_pll_iomap:
+	kfree(iclk_array);
+
+err_clks:
+	kfree(clk_data);
+
+err_clk_data:
+	kfree(pll);
+}
diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h
new file mode 100644
index 000000000..a48ddd3e0
--- /dev/null
+++ b/drivers/clk/bcm/clk-iproc.h
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLK_IPROC_H
+#define _CLK_IPROC_H
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+
+#define IPROC_CLK_NAME_LEN 25
+#define IPROC_CLK_INVALID_OFFSET 0xffffffff
+#define bit_mask(width) ((1 << (width)) - 1)
+
+/* clocks that should not be disabled at runtime */
+#define IPROC_CLK_AON BIT(0)
+
+/* PLL that requires gating through ASIU */
+#define IPROC_CLK_PLL_ASIU BIT(1)
+
+/* PLL that has fractional part of the NDIV */
+#define IPROC_CLK_PLL_HAS_NDIV_FRAC BIT(2)
+
+/*
+ * Some of the iProc PLL/clocks may have an ASIC bug that requires read back
+ * of the same register following the write to flush the write transaction into
+ * the intended register
+ */
+#define IPROC_CLK_NEEDS_READ_BACK BIT(3)
+
+/*
+ * Some PLLs require the PLL SW override bit to be set before changes can be
+ * applied to the PLL
+ */
+#define IPROC_CLK_PLL_NEEDS_SW_CFG BIT(4)
+
+/*
+ * Some PLLs use a different way to control clock power, via the PWRDWN bit in
+ * the PLL control register
+ */
+#define IPROC_CLK_EMBED_PWRCTRL BIT(5)
+
+/*
+ * Some PLLs have separate registers for Status and Control.  Identify this to
+ * let the driver know if additional registers need to be used
+ */
+#define IPROC_CLK_PLL_SPLIT_STAT_CTRL BIT(6)
+
+/*
+ * Some PLLs have an additional divide by 2 in master clock calculation;
+ * MCLK = VCO_freq / (Mdiv * 2). Identify this to let the driver know
+ * of modified calculations
+ */
+#define IPROC_CLK_MCLK_DIV_BY_2 BIT(7)
+
+/*
+ * Some PLLs provide a look up table for the leaf clock frequencies and
+ * auto calculates VCO frequency parameters based on the provided leaf
+ * clock frequencies. They have a user mode that allows the divider
+ * controls to be determined by the user
+ */
+#define IPROC_CLK_PLL_USER_MODE_ON BIT(8)
+
+/*
+ * Some PLLs have an active low reset
+ */
+#define IPROC_CLK_PLL_RESET_ACTIVE_LOW BIT(9)
+
+/*
+ * Calculate the PLL parameters are runtime, instead of using table
+ */
+#define IPROC_CLK_PLL_CALC_PARAM BIT(10)
+
+/*
+ * Parameters for VCO frequency configuration
+ *
+ * VCO frequency =
+ * ((ndiv_int + ndiv_frac / 2^20) * (ref freqeuncy  / pdiv)
+ */
+struct iproc_pll_vco_param {
+	unsigned long rate;
+	unsigned int ndiv_int;
+	unsigned int ndiv_frac;
+	unsigned int pdiv;
+};
+
+struct iproc_clk_reg_op {
+	unsigned int offset;
+	unsigned int shift;
+	unsigned int width;
+};
+
+/*
+ * Clock gating control at the top ASIU level
+ */
+struct iproc_asiu_gate {
+	unsigned int offset;
+	unsigned int en_shift;
+};
+
+/*
+ * Control of powering on/off of a PLL
+ *
+ * Before powering off a PLL, input isolation (ISO) needs to be enabled
+ */
+struct iproc_pll_aon_pwr_ctrl {
+	unsigned int offset;
+	unsigned int pwr_width;
+	unsigned int pwr_shift;
+	unsigned int iso_shift;
+};
+
+/*
+ * Control of the PLL reset
+ */
+struct iproc_pll_reset_ctrl {
+	unsigned int offset;
+	unsigned int reset_shift;
+	unsigned int p_reset_shift;
+};
+
+/*
+ * Control of the Ki, Kp, and Ka parameters
+ */
+struct iproc_pll_dig_filter_ctrl {
+	unsigned int offset;
+	unsigned int ki_shift;
+	unsigned int ki_width;
+	unsigned int kp_shift;
+	unsigned int kp_width;
+	unsigned int ka_shift;
+	unsigned int ka_width;
+};
+
+/*
+ * To enable SW control of the PLL
+ */
+struct iproc_pll_sw_ctrl {
+	unsigned int offset;
+	unsigned int shift;
+};
+
+struct iproc_pll_vco_ctrl {
+	unsigned int u_offset;
+	unsigned int l_offset;
+};
+
+/*
+ * Main PLL control parameters
+ */
+struct iproc_pll_ctrl {
+	unsigned long flags;
+	struct iproc_pll_aon_pwr_ctrl aon;
+	struct iproc_asiu_gate asiu;
+	struct iproc_pll_reset_ctrl reset;
+	struct iproc_pll_dig_filter_ctrl dig_filter;
+	struct iproc_pll_sw_ctrl sw_ctrl;
+	struct iproc_clk_reg_op ndiv_int;
+	struct iproc_clk_reg_op ndiv_frac;
+	struct iproc_clk_reg_op pdiv;
+	struct iproc_pll_vco_ctrl vco_ctrl;
+	struct iproc_clk_reg_op status;
+	struct iproc_clk_reg_op macro_mode;
+};
+
+/*
+ * Controls enabling/disabling a PLL derived clock
+ */
+struct iproc_clk_enable_ctrl {
+	unsigned int offset;
+	unsigned int enable_shift;
+	unsigned int hold_shift;
+	unsigned int bypass_shift;
+};
+
+/*
+ * Main clock control parameters for clocks derived from the PLLs
+ */
+struct iproc_clk_ctrl {
+	unsigned int channel;
+	unsigned long flags;
+	struct iproc_clk_enable_ctrl enable;
+	struct iproc_clk_reg_op mdiv;
+};
+
+/*
+ * Divisor of the ASIU clocks
+ */
+struct iproc_asiu_div {
+	unsigned int offset;
+	unsigned int en_shift;
+	unsigned int high_shift;
+	unsigned int high_width;
+	unsigned int low_shift;
+	unsigned int low_width;
+};
+
+void iproc_armpll_setup(struct device_node *node);
+void iproc_pll_clk_setup(struct device_node *node,
+			 const struct iproc_pll_ctrl *pll_ctrl,
+			 const struct iproc_pll_vco_param *vco,
+			 unsigned int num_vco_entries,
+			 const struct iproc_clk_ctrl *clk_ctrl,
+			 unsigned int num_clks);
+void iproc_asiu_setup(struct device_node *node,
+		      const struct iproc_asiu_div *div,
+		      const struct iproc_asiu_gate *gate,
+		      unsigned int num_clks);
+
+#endif /* _CLK_IPROC_H */
diff --git a/drivers/clk/bcm/clk-kona-setup.c b/drivers/clk/bcm/clk-kona-setup.c
new file mode 100644
index 000000000..e65eeef9c
--- /dev/null
+++ b/drivers/clk/bcm/clk-kona-setup.c
@@ -0,0 +1,863 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/of_address.h>
+
+#include "clk-kona.h"
+
+/* These are used when a selector or trigger is found to be unneeded */
+#define selector_clear_exists(sel)	((sel)->width = 0)
+#define trigger_clear_exists(trig)	FLAG_CLEAR(trig, TRIG, EXISTS)
+
+/* Validity checking */
+
+static bool ccu_data_offsets_valid(struct ccu_data *ccu)
+{
+	struct ccu_policy *ccu_policy = &ccu->policy;
+	u32 limit;
+
+	limit = ccu->range - sizeof(u32);
+	limit = round_down(limit, sizeof(u32));
+	if (ccu_policy_exists(ccu_policy)) {
+		if (ccu_policy->enable.offset > limit) {
+			pr_err("%s: bad policy enable offset for %s "
+					"(%u > %u)\n", __func__,
+				ccu->name, ccu_policy->enable.offset, limit);
+			return false;
+		}
+		if (ccu_policy->control.offset > limit) {
+			pr_err("%s: bad policy control offset for %s "
+					"(%u > %u)\n", __func__,
+				ccu->name, ccu_policy->control.offset, limit);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+static bool clk_requires_trigger(struct kona_clk *bcm_clk)
+{
+	struct peri_clk_data *peri = bcm_clk->u.peri;
+	struct bcm_clk_sel *sel;
+	struct bcm_clk_div *div;
+
+	if (bcm_clk->type != bcm_clk_peri)
+		return false;
+
+	sel = &peri->sel;
+	if (sel->parent_count && selector_exists(sel))
+		return true;
+
+	div = &peri->div;
+	if (!divider_exists(div))
+		return false;
+
+	/* Fixed dividers don't need triggers */
+	if (!divider_is_fixed(div))
+		return true;
+
+	div = &peri->pre_div;
+
+	return divider_exists(div) && !divider_is_fixed(div);
+}
+
+static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk)
+{
+	struct peri_clk_data *peri;
+	struct bcm_clk_policy *policy;
+	struct bcm_clk_gate *gate;
+	struct bcm_clk_hyst *hyst;
+	struct bcm_clk_div *div;
+	struct bcm_clk_sel *sel;
+	struct bcm_clk_trig *trig;
+	const char *name;
+	u32 range;
+	u32 limit;
+
+	BUG_ON(bcm_clk->type != bcm_clk_peri);
+	peri = bcm_clk->u.peri;
+	name = bcm_clk->init_data.name;
+	range = bcm_clk->ccu->range;
+
+	limit = range - sizeof(u32);
+	limit = round_down(limit, sizeof(u32));
+
+	policy = &peri->policy;
+	if (policy_exists(policy)) {
+		if (policy->offset > limit) {
+			pr_err("%s: bad policy offset for %s (%u > %u)\n",
+				__func__, name, policy->offset, limit);
+			return false;
+		}
+	}
+
+	gate = &peri->gate;
+	hyst = &peri->hyst;
+	if (gate_exists(gate)) {
+		if (gate->offset > limit) {
+			pr_err("%s: bad gate offset for %s (%u > %u)\n",
+				__func__, name, gate->offset, limit);
+			return false;
+		}
+
+		if (hyst_exists(hyst)) {
+			if (hyst->offset > limit) {
+				pr_err("%s: bad hysteresis offset for %s "
+					"(%u > %u)\n", __func__,
+					name, hyst->offset, limit);
+				return false;
+			}
+		}
+	} else if (hyst_exists(hyst)) {
+		pr_err("%s: hysteresis but no gate for %s\n", __func__, name);
+		return false;
+	}
+
+	div = &peri->div;
+	if (divider_exists(div)) {
+		if (div->u.s.offset > limit) {
+			pr_err("%s: bad divider offset for %s (%u > %u)\n",
+				__func__, name, div->u.s.offset, limit);
+			return false;
+		}
+	}
+
+	div = &peri->pre_div;
+	if (divider_exists(div)) {
+		if (div->u.s.offset > limit) {
+			pr_err("%s: bad pre-divider offset for %s "
+					"(%u > %u)\n",
+				__func__, name, div->u.s.offset, limit);
+			return false;
+		}
+	}
+
+	sel = &peri->sel;
+	if (selector_exists(sel)) {
+		if (sel->offset > limit) {
+			pr_err("%s: bad selector offset for %s (%u > %u)\n",
+				__func__, name, sel->offset, limit);
+			return false;
+		}
+	}
+
+	trig = &peri->trig;
+	if (trigger_exists(trig)) {
+		if (trig->offset > limit) {
+			pr_err("%s: bad trigger offset for %s (%u > %u)\n",
+				__func__, name, trig->offset, limit);
+			return false;
+		}
+	}
+
+	trig = &peri->pre_trig;
+	if (trigger_exists(trig)) {
+		if (trig->offset > limit) {
+			pr_err("%s: bad pre-trigger offset for %s (%u > %u)\n",
+				__func__, name, trig->offset, limit);
+			return false;
+		}
+	}
+
+	return true;
+}
+
+/* A bit position must be less than the number of bits in a 32-bit register. */
+static bool bit_posn_valid(u32 bit_posn, const char *field_name,
+			const char *clock_name)
+{
+	u32 limit = BITS_PER_BYTE * sizeof(u32) - 1;
+
+	if (bit_posn > limit) {
+		pr_err("%s: bad %s bit for %s (%u > %u)\n", __func__,
+			field_name, clock_name, bit_posn, limit);
+		return false;
+	}
+	return true;
+}
+
+/*
+ * A bitfield must be at least 1 bit wide.  Both the low-order and
+ * high-order bits must lie within a 32-bit register.  We require
+ * fields to be less than 32 bits wide, mainly because we use
+ * shifting to produce field masks, and shifting a full word width
+ * is not well-defined by the C standard.
+ */
+static bool bitfield_valid(u32 shift, u32 width, const char *field_name,
+			const char *clock_name)
+{
+	u32 limit = BITS_PER_BYTE * sizeof(u32);
+
+	if (!width) {
+		pr_err("%s: bad %s field width 0 for %s\n", __func__,
+			field_name, clock_name);
+		return false;
+	}
+	if (shift + width > limit) {
+		pr_err("%s: bad %s for %s (%u + %u > %u)\n", __func__,
+			field_name, clock_name, shift, width, limit);
+		return false;
+	}
+	return true;
+}
+
+static bool
+ccu_policy_valid(struct ccu_policy *ccu_policy, const char *ccu_name)
+{
+	struct bcm_lvm_en *enable = &ccu_policy->enable;
+	struct bcm_policy_ctl *control;
+
+	if (!bit_posn_valid(enable->bit, "policy enable", ccu_name))
+		return false;
+
+	control = &ccu_policy->control;
+	if (!bit_posn_valid(control->go_bit, "policy control GO", ccu_name))
+		return false;
+
+	if (!bit_posn_valid(control->atl_bit, "policy control ATL", ccu_name))
+		return false;
+
+	if (!bit_posn_valid(control->ac_bit, "policy control AC", ccu_name))
+		return false;
+
+	return true;
+}
+
+static bool policy_valid(struct bcm_clk_policy *policy, const char *clock_name)
+{
+	if (!bit_posn_valid(policy->bit, "policy", clock_name))
+		return false;
+
+	return true;
+}
+
+/*
+ * All gates, if defined, have a status bit, and for hardware-only
+ * gates, that's it.  Gates that can be software controlled also
+ * have an enable bit.  And a gate that can be hardware or software
+ * controlled will have a hardware/software select bit.
+ */
+static bool gate_valid(struct bcm_clk_gate *gate, const char *field_name,
+			const char *clock_name)
+{
+	if (!bit_posn_valid(gate->status_bit, "gate status", clock_name))
+		return false;
+
+	if (gate_is_sw_controllable(gate)) {
+		if (!bit_posn_valid(gate->en_bit, "gate enable", clock_name))
+			return false;
+
+		if (gate_is_hw_controllable(gate)) {
+			if (!bit_posn_valid(gate->hw_sw_sel_bit,
+						"gate hw/sw select",
+						clock_name))
+				return false;
+		}
+	} else {
+		BUG_ON(!gate_is_hw_controllable(gate));
+	}
+
+	return true;
+}
+
+static bool hyst_valid(struct bcm_clk_hyst *hyst, const char *clock_name)
+{
+	if (!bit_posn_valid(hyst->en_bit, "hysteresis enable", clock_name))
+		return false;
+
+	if (!bit_posn_valid(hyst->val_bit, "hysteresis value", clock_name))
+		return false;
+
+	return true;
+}
+
+/*
+ * A selector bitfield must be valid.  Its parent_sel array must
+ * also be reasonable for the field.
+ */
+static bool sel_valid(struct bcm_clk_sel *sel, const char *field_name,
+			const char *clock_name)
+{
+	if (!bitfield_valid(sel->shift, sel->width, field_name, clock_name))
+		return false;
+
+	if (sel->parent_count) {
+		u32 max_sel;
+		u32 limit;
+
+		/*
+		 * Make sure the selector field can hold all the
+		 * selector values we expect to be able to use.  A
+		 * clock only needs to have a selector defined if it
+		 * has more than one parent.  And in that case the
+		 * highest selector value will be in the last entry
+		 * in the array.
+		 */
+		max_sel = sel->parent_sel[sel->parent_count - 1];
+		limit = (1 << sel->width) - 1;
+		if (max_sel > limit) {
+			pr_err("%s: bad selector for %s "
+					"(%u needs > %u bits)\n",
+				__func__, clock_name, max_sel,
+				sel->width);
+			return false;
+		}
+	} else {
+		pr_warn("%s: ignoring selector for %s (no parents)\n",
+			__func__, clock_name);
+		selector_clear_exists(sel);
+		kfree(sel->parent_sel);
+		sel->parent_sel = NULL;
+	}
+
+	return true;
+}
+
+/*
+ * A fixed divider just needs to be non-zero.  A variable divider
+ * has to have a valid divider bitfield, and if it has a fraction,
+ * the width of the fraction must not be no more than the width of
+ * the divider as a whole.
+ */
+static bool div_valid(struct bcm_clk_div *div, const char *field_name,
+			const char *clock_name)
+{
+	if (divider_is_fixed(div)) {
+		/* Any fixed divider value but 0 is OK */
+		if (div->u.fixed == 0) {
+			pr_err("%s: bad %s fixed value 0 for %s\n", __func__,
+				field_name, clock_name);
+			return false;
+		}
+		return true;
+	}
+	if (!bitfield_valid(div->u.s.shift, div->u.s.width,
+				field_name, clock_name))
+		return false;
+
+	if (divider_has_fraction(div))
+		if (div->u.s.frac_width > div->u.s.width) {
+			pr_warn("%s: bad %s fraction width for %s (%u > %u)\n",
+				__func__, field_name, clock_name,
+				div->u.s.frac_width, div->u.s.width);
+			return false;
+		}
+
+	return true;
+}
+
+/*
+ * If a clock has two dividers, the combined number of fractional
+ * bits must be representable in a 32-bit unsigned value.  This
+ * is because we scale up a dividend using both dividers before
+ * dividing to improve accuracy, and we need to avoid overflow.
+ */
+static bool kona_dividers_valid(struct kona_clk *bcm_clk)
+{
+	struct peri_clk_data *peri = bcm_clk->u.peri;
+	struct bcm_clk_div *div;
+	struct bcm_clk_div *pre_div;
+	u32 limit;
+
+	BUG_ON(bcm_clk->type != bcm_clk_peri);
+
+	if (!divider_exists(&peri->div) || !divider_exists(&peri->pre_div))
+		return true;
+
+	div = &peri->div;
+	pre_div = &peri->pre_div;
+	if (divider_is_fixed(div) || divider_is_fixed(pre_div))
+		return true;
+
+	limit = BITS_PER_BYTE * sizeof(u32);
+
+	return div->u.s.frac_width + pre_div->u.s.frac_width <= limit;
+}
+
+
+/* A trigger just needs to represent a valid bit position */
+static bool trig_valid(struct bcm_clk_trig *trig, const char *field_name,
+			const char *clock_name)
+{
+	return bit_posn_valid(trig->bit, field_name, clock_name);
+}
+
+/* Determine whether the set of peripheral clock registers are valid. */
+static bool
+peri_clk_data_valid(struct kona_clk *bcm_clk)
+{
+	struct peri_clk_data *peri;
+	struct bcm_clk_policy *policy;
+	struct bcm_clk_gate *gate;
+	struct bcm_clk_hyst *hyst;
+	struct bcm_clk_sel *sel;
+	struct bcm_clk_div *div;
+	struct bcm_clk_div *pre_div;
+	struct bcm_clk_trig *trig;
+	const char *name;
+
+	BUG_ON(bcm_clk->type != bcm_clk_peri);
+
+	/*
+	 * First validate register offsets.  This is the only place
+	 * where we need something from the ccu, so we do these
+	 * together.
+	 */
+	if (!peri_clk_data_offsets_valid(bcm_clk))
+		return false;
+
+	peri = bcm_clk->u.peri;
+	name = bcm_clk->init_data.name;
+
+	policy = &peri->policy;
+	if (policy_exists(policy) && !policy_valid(policy, name))
+		return false;
+
+	gate = &peri->gate;
+	if (gate_exists(gate) && !gate_valid(gate, "gate", name))
+		return false;
+
+	hyst = &peri->hyst;
+	if (hyst_exists(hyst) && !hyst_valid(hyst, name))
+		return false;
+
+	sel = &peri->sel;
+	if (selector_exists(sel)) {
+		if (!sel_valid(sel, "selector", name))
+			return false;
+
+	} else if (sel->parent_count > 1) {
+		pr_err("%s: multiple parents but no selector for %s\n",
+			__func__, name);
+
+		return false;
+	}
+
+	div = &peri->div;
+	pre_div = &peri->pre_div;
+	if (divider_exists(div)) {
+		if (!div_valid(div, "divider", name))
+			return false;
+
+		if (divider_exists(pre_div))
+			if (!div_valid(pre_div, "pre-divider", name))
+				return false;
+	} else if (divider_exists(pre_div)) {
+		pr_err("%s: pre-divider but no divider for %s\n", __func__,
+			name);
+		return false;
+	}
+
+	trig = &peri->trig;
+	if (trigger_exists(trig)) {
+		if (!trig_valid(trig, "trigger", name))
+			return false;
+
+		if (trigger_exists(&peri->pre_trig)) {
+			if (!trig_valid(trig, "pre-trigger", name)) {
+				return false;
+			}
+		}
+		if (!clk_requires_trigger(bcm_clk)) {
+			pr_warn("%s: ignoring trigger for %s (not needed)\n",
+				__func__, name);
+			trigger_clear_exists(trig);
+		}
+	} else if (trigger_exists(&peri->pre_trig)) {
+		pr_err("%s: pre-trigger but no trigger for %s\n", __func__,
+			name);
+		return false;
+	} else if (clk_requires_trigger(bcm_clk)) {
+		pr_err("%s: required trigger missing for %s\n", __func__,
+			name);
+		return false;
+	}
+
+	return kona_dividers_valid(bcm_clk);
+}
+
+static bool kona_clk_valid(struct kona_clk *bcm_clk)
+{
+	switch (bcm_clk->type) {
+	case bcm_clk_peri:
+		if (!peri_clk_data_valid(bcm_clk))
+			return false;
+		break;
+	default:
+		pr_err("%s: unrecognized clock type (%d)\n", __func__,
+			(int)bcm_clk->type);
+		return false;
+	}
+	return true;
+}
+
+/*
+ * Scan an array of parent clock names to determine whether there
+ * are any entries containing BAD_CLK_NAME.  Such entries are
+ * placeholders for non-supported clocks.  Keep track of the
+ * position of each clock name in the original array.
+ *
+ * Allocates an array of pointers to to hold the names of all
+ * non-null entries in the original array, and returns a pointer to
+ * that array in *names.  This will be used for registering the
+ * clock with the common clock code.  On successful return,
+ * *count indicates how many entries are in that names array.
+ *
+ * If there is more than one entry in the resulting names array,
+ * another array is allocated to record the parent selector value
+ * for each (defined) parent clock.  This is the value that
+ * represents this parent clock in the clock's source selector
+ * register.  The position of the clock in the original parent array
+ * defines that selector value.  The number of entries in this array
+ * is the same as the number of entries in the parent names array.
+ *
+ * The array of selector values is returned.  If the clock has no
+ * parents, no selector is required and a null pointer is returned.
+ *
+ * Returns a null pointer if the clock names array supplied was
+ * null.  (This is not an error.)
+ *
+ * Returns a pointer-coded error if an error occurs.
+ */
+static u32 *parent_process(const char *clocks[],
+			u32 *count, const char ***names)
+{
+	static const char **parent_names;
+	static u32 *parent_sel;
+	const char **clock;
+	u32 parent_count;
+	u32 bad_count = 0;
+	u32 orig_count;
+	u32 i;
+	u32 j;
+
+	*count = 0;	/* In case of early return */
+	*names = NULL;
+	if (!clocks)
+		return NULL;
+
+	/*
+	 * Count the number of names in the null-terminated array,
+	 * and find out how many of those are actually clock names.
+	 */
+	for (clock = clocks; *clock; clock++)
+		if (*clock == BAD_CLK_NAME)
+			bad_count++;
+	orig_count = (u32)(clock - clocks);
+	parent_count = orig_count - bad_count;
+
+	/* If all clocks are unsupported, we treat it as no clock */
+	if (!parent_count)
+		return NULL;
+
+	/* Avoid exceeding our parent clock limit */
+	if (parent_count > PARENT_COUNT_MAX) {
+		pr_err("%s: too many parents (%u > %u)\n", __func__,
+			parent_count, PARENT_COUNT_MAX);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/*
+	 * There is one parent name for each defined parent clock.
+	 * We also maintain an array containing the selector value
+	 * for each defined clock.  If there's only one clock, the
+	 * selector is not required, but we allocate space for the
+	 * array anyway to keep things simple.
+	 */
+	parent_names = kmalloc_array(parent_count, sizeof(*parent_names),
+			       GFP_KERNEL);
+	if (!parent_names)
+		return ERR_PTR(-ENOMEM);
+
+	/* There is at least one parent, so allocate a selector array */
+	parent_sel = kmalloc_array(parent_count, sizeof(*parent_sel),
+				   GFP_KERNEL);
+	if (!parent_sel) {
+		kfree(parent_names);
+
+		return ERR_PTR(-ENOMEM);
+	}
+
+	/* Now fill in the parent names and selector arrays */
+	for (i = 0, j = 0; i < orig_count; i++) {
+		if (clocks[i] != BAD_CLK_NAME) {
+			parent_names[j] = clocks[i];
+			parent_sel[j] = i;
+			j++;
+		}
+	}
+	*names = parent_names;
+	*count = parent_count;
+
+	return parent_sel;
+}
+
+static int
+clk_sel_setup(const char **clocks, struct bcm_clk_sel *sel,
+		struct clk_init_data *init_data)
+{
+	const char **parent_names = NULL;
+	u32 parent_count = 0;
+	u32 *parent_sel;
+
+	/*
+	 * If a peripheral clock has multiple parents, the value
+	 * used by the hardware to select that parent is represented
+	 * by the parent clock's position in the "clocks" list.  Some
+	 * values don't have defined or supported clocks; these will
+	 * have BAD_CLK_NAME entries in the parents[] array.  The
+	 * list is terminated by a NULL entry.
+	 *
+	 * We need to supply (only) the names of defined parent
+	 * clocks when registering a clock though, so we use an
+	 * array of parent selector values to map between the
+	 * indexes the common clock code uses and the selector
+	 * values we need.
+	 */
+	parent_sel = parent_process(clocks, &parent_count, &parent_names);
+	if (IS_ERR(parent_sel)) {
+		int ret = PTR_ERR(parent_sel);
+
+		pr_err("%s: error processing parent clocks for %s (%d)\n",
+			__func__, init_data->name, ret);
+
+		return ret;
+	}
+
+	init_data->parent_names = parent_names;
+	init_data->num_parents = parent_count;
+
+	sel->parent_count = parent_count;
+	sel->parent_sel = parent_sel;
+
+	return 0;
+}
+
+static void clk_sel_teardown(struct bcm_clk_sel *sel,
+		struct clk_init_data *init_data)
+{
+	kfree(sel->parent_sel);
+	sel->parent_sel = NULL;
+	sel->parent_count = 0;
+
+	init_data->num_parents = 0;
+	kfree(init_data->parent_names);
+	init_data->parent_names = NULL;
+}
+
+static void peri_clk_teardown(struct peri_clk_data *data,
+				struct clk_init_data *init_data)
+{
+	clk_sel_teardown(&data->sel, init_data);
+}
+
+/*
+ * Caller is responsible for freeing the parent_names[] and
+ * parent_sel[] arrays in the peripheral clock's "data" structure
+ * that can be assigned if the clock has one or more parent clocks
+ * associated with it.
+ */
+static int
+peri_clk_setup(struct peri_clk_data *data, struct clk_init_data *init_data)
+{
+	init_data->flags = CLK_IGNORE_UNUSED;
+
+	return clk_sel_setup(data->clocks, &data->sel, init_data);
+}
+
+static void bcm_clk_teardown(struct kona_clk *bcm_clk)
+{
+	switch (bcm_clk->type) {
+	case bcm_clk_peri:
+		peri_clk_teardown(bcm_clk->u.data, &bcm_clk->init_data);
+		break;
+	default:
+		break;
+	}
+	bcm_clk->u.data = NULL;
+	bcm_clk->type = bcm_clk_none;
+}
+
+static void kona_clk_teardown(struct clk_hw *hw)
+{
+	struct kona_clk *bcm_clk;
+
+	if (!hw)
+		return;
+
+	clk_hw_unregister(hw);
+
+	bcm_clk = to_kona_clk(hw);
+	bcm_clk_teardown(bcm_clk);
+}
+
+static int kona_clk_setup(struct kona_clk *bcm_clk)
+{
+	int ret;
+	struct clk_init_data *init_data = &bcm_clk->init_data;
+
+	switch (bcm_clk->type) {
+	case bcm_clk_peri:
+		ret = peri_clk_setup(bcm_clk->u.data, init_data);
+		if (ret)
+			return ret;
+		break;
+	default:
+		pr_err("%s: clock type %d invalid for %s\n", __func__,
+			(int)bcm_clk->type, init_data->name);
+		return -EINVAL;
+	}
+
+	/* Make sure everything makes sense before we set it up */
+	if (!kona_clk_valid(bcm_clk)) {
+		pr_err("%s: clock data invalid for %s\n", __func__,
+			init_data->name);
+		ret = -EINVAL;
+		goto out_teardown;
+	}
+
+	bcm_clk->hw.init = init_data;
+	ret = clk_hw_register(NULL, &bcm_clk->hw);
+	if (ret) {
+		pr_err("%s: error registering clock %s (%d)\n", __func__,
+			init_data->name, ret);
+		goto out_teardown;
+	}
+
+	return 0;
+out_teardown:
+	bcm_clk_teardown(bcm_clk);
+
+	return ret;
+}
+
+static void ccu_clks_teardown(struct ccu_data *ccu)
+{
+	u32 i;
+
+	for (i = 0; i < ccu->clk_num; i++)
+		kona_clk_teardown(&ccu->kona_clks[i].hw);
+}
+
+static void kona_ccu_teardown(struct ccu_data *ccu)
+{
+	if (!ccu->base)
+		return;
+
+	of_clk_del_provider(ccu->node);	/* safe if never added */
+	ccu_clks_teardown(ccu);
+	of_node_put(ccu->node);
+	ccu->node = NULL;
+	iounmap(ccu->base);
+	ccu->base = NULL;
+}
+
+static bool ccu_data_valid(struct ccu_data *ccu)
+{
+	struct ccu_policy *ccu_policy;
+
+	if (!ccu_data_offsets_valid(ccu))
+		return false;
+
+	ccu_policy = &ccu->policy;
+	if (ccu_policy_exists(ccu_policy))
+		if (!ccu_policy_valid(ccu_policy, ccu->name))
+			return false;
+
+	return true;
+}
+
+static struct clk_hw *
+of_clk_kona_onecell_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct ccu_data *ccu = data;
+	unsigned int idx = clkspec->args[0];
+
+	if (idx >= ccu->clk_num) {
+		pr_err("%s: invalid index %u\n", __func__, idx);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return &ccu->kona_clks[idx].hw;
+}
+
+/*
+ * Set up a CCU.  Call the provided ccu_clks_setup callback to
+ * initialize the array of clocks provided by the CCU.
+ */
+void __init kona_dt_ccu_setup(struct ccu_data *ccu,
+			struct device_node *node)
+{
+	struct resource res = { 0 };
+	resource_size_t range;
+	unsigned int i;
+	int ret;
+
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret) {
+		pr_err("%s: no valid CCU registers found for %pOFn\n", __func__,
+			node);
+		goto out_err;
+	}
+
+	range = resource_size(&res);
+	if (range > (resource_size_t)U32_MAX) {
+		pr_err("%s: address range too large for %pOFn\n", __func__,
+			node);
+		goto out_err;
+	}
+
+	ccu->range = (u32)range;
+
+	if (!ccu_data_valid(ccu)) {
+		pr_err("%s: ccu data not valid for %pOFn\n", __func__, node);
+		goto out_err;
+	}
+
+	ccu->base = ioremap(res.start, ccu->range);
+	if (!ccu->base) {
+		pr_err("%s: unable to map CCU registers for %pOFn\n", __func__,
+			node);
+		goto out_err;
+	}
+	ccu->node = of_node_get(node);
+
+	/*
+	 * Set up each defined kona clock and save the result in
+	 * the clock framework clock array (in ccu->data).  Then
+	 * register as a provider for these clocks.
+	 */
+	for (i = 0; i < ccu->clk_num; i++) {
+		if (!ccu->kona_clks[i].ccu)
+			continue;
+		kona_clk_setup(&ccu->kona_clks[i]);
+	}
+
+	ret = of_clk_add_hw_provider(node, of_clk_kona_onecell_get, ccu);
+	if (ret) {
+		pr_err("%s: error adding ccu %pOFn as provider (%d)\n", __func__,
+				node, ret);
+		goto out_err;
+	}
+
+	if (!kona_ccu_init(ccu))
+		pr_err("Broadcom %pOFn initialization had errors\n", node);
+
+	return;
+out_err:
+	kona_ccu_teardown(ccu);
+	pr_err("Broadcom %pOFn setup aborted\n", node);
+}
diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
new file mode 100644
index 000000000..cc3b1e1bc
--- /dev/null
+++ b/drivers/clk/bcm/clk-kona.c
@@ -0,0 +1,1278 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "clk-kona.h"
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+
+/*
+ * "Policies" affect the frequencies of bus clocks provided by a
+ * CCU.  (I believe these polices are named "Deep Sleep", "Economy",
+ * "Normal", and "Turbo".)  A lower policy number has lower power
+ * consumption, and policy 2 is the default.
+ */
+#define CCU_POLICY_COUNT	4
+
+#define CCU_ACCESS_PASSWORD      0xA5A500
+#define CLK_GATE_DELAY_LOOP      2000
+
+/* Bitfield operations */
+
+/* Produces a mask of set bits covering a range of a 32-bit value */
+static inline u32 bitfield_mask(u32 shift, u32 width)
+{
+	return ((1 << width) - 1) << shift;
+}
+
+/* Extract the value of a bitfield found within a given register value */
+static inline u32 bitfield_extract(u32 reg_val, u32 shift, u32 width)
+{
+	return (reg_val & bitfield_mask(shift, width)) >> shift;
+}
+
+/* Replace the value of a bitfield found within a given register value */
+static inline u32 bitfield_replace(u32 reg_val, u32 shift, u32 width, u32 val)
+{
+	u32 mask = bitfield_mask(shift, width);
+
+	return (reg_val & ~mask) | (val << shift);
+}
+
+/* Divider and scaling helpers */
+
+/* Convert a divider into the scaled divisor value it represents. */
+static inline u64 scaled_div_value(struct bcm_clk_div *div, u32 reg_div)
+{
+	return (u64)reg_div + ((u64)1 << div->u.s.frac_width);
+}
+
+/*
+ * Build a scaled divider value as close as possible to the
+ * given whole part (div_value) and fractional part (expressed
+ * in billionths).
+ */
+u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value, u32 billionths)
+{
+	u64 combined;
+
+	BUG_ON(!div_value);
+	BUG_ON(billionths >= BILLION);
+
+	combined = (u64)div_value * BILLION + billionths;
+	combined <<= div->u.s.frac_width;
+
+	return DIV_ROUND_CLOSEST_ULL(combined, BILLION);
+}
+
+/* The scaled minimum divisor representable by a divider */
+static inline u64
+scaled_div_min(struct bcm_clk_div *div)
+{
+	if (divider_is_fixed(div))
+		return (u64)div->u.fixed;
+
+	return scaled_div_value(div, 0);
+}
+
+/* The scaled maximum divisor representable by a divider */
+u64 scaled_div_max(struct bcm_clk_div *div)
+{
+	u32 reg_div;
+
+	if (divider_is_fixed(div))
+		return (u64)div->u.fixed;
+
+	reg_div = ((u32)1 << div->u.s.width) - 1;
+
+	return scaled_div_value(div, reg_div);
+}
+
+/*
+ * Convert a scaled divisor into its divider representation as
+ * stored in a divider register field.
+ */
+static inline u32
+divider(struct bcm_clk_div *div, u64 scaled_div)
+{
+	BUG_ON(scaled_div < scaled_div_min(div));
+	BUG_ON(scaled_div > scaled_div_max(div));
+
+	return (u32)(scaled_div - ((u64)1 << div->u.s.frac_width));
+}
+
+/* Return a rate scaled for use when dividing by a scaled divisor. */
+static inline u64
+scale_rate(struct bcm_clk_div *div, u32 rate)
+{
+	if (divider_is_fixed(div))
+		return (u64)rate;
+
+	return (u64)rate << div->u.s.frac_width;
+}
+
+/* CCU access */
+
+/* Read a 32-bit register value from a CCU's address space. */
+static inline u32 __ccu_read(struct ccu_data *ccu, u32 reg_offset)
+{
+	return readl(ccu->base + reg_offset);
+}
+
+/* Write a 32-bit register value into a CCU's address space. */
+static inline void
+__ccu_write(struct ccu_data *ccu, u32 reg_offset, u32 reg_val)
+{
+	writel(reg_val, ccu->base + reg_offset);
+}
+
+static inline unsigned long ccu_lock(struct ccu_data *ccu)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&ccu->lock, flags);
+
+	return flags;
+}
+static inline void ccu_unlock(struct ccu_data *ccu, unsigned long flags)
+{
+	spin_unlock_irqrestore(&ccu->lock, flags);
+}
+
+/*
+ * Enable/disable write access to CCU protected registers.  The
+ * WR_ACCESS register for all CCUs is at offset 0.
+ */
+static inline void __ccu_write_enable(struct ccu_data *ccu)
+{
+	if (ccu->write_enabled) {
+		pr_err("%s: access already enabled for %s\n", __func__,
+			ccu->name);
+		return;
+	}
+	ccu->write_enabled = true;
+	__ccu_write(ccu, 0, CCU_ACCESS_PASSWORD | 1);
+}
+
+static inline void __ccu_write_disable(struct ccu_data *ccu)
+{
+	if (!ccu->write_enabled) {
+		pr_err("%s: access wasn't enabled for %s\n", __func__,
+			ccu->name);
+		return;
+	}
+
+	__ccu_write(ccu, 0, CCU_ACCESS_PASSWORD);
+	ccu->write_enabled = false;
+}
+
+/*
+ * Poll a register in a CCU's address space, returning when the
+ * specified bit in that register's value is set (or clear).  Delay
+ * a microsecond after each read of the register.  Returns true if
+ * successful, or false if we gave up trying.
+ *
+ * Caller must ensure the CCU lock is held.
+ */
+static inline bool
+__ccu_wait_bit(struct ccu_data *ccu, u32 reg_offset, u32 bit, bool want)
+{
+	unsigned int tries;
+	u32 bit_mask = 1 << bit;
+
+	for (tries = 0; tries < CLK_GATE_DELAY_LOOP; tries++) {
+		u32 val;
+		bool bit_val;
+
+		val = __ccu_read(ccu, reg_offset);
+		bit_val = (val & bit_mask) != 0;
+		if (bit_val == want)
+			return true;
+		udelay(1);
+	}
+	pr_warn("%s: %s/0x%04x bit %u was never %s\n", __func__,
+		ccu->name, reg_offset, bit, want ? "set" : "clear");
+
+	return false;
+}
+
+/* Policy operations */
+
+static bool __ccu_policy_engine_start(struct ccu_data *ccu, bool sync)
+{
+	struct bcm_policy_ctl *control = &ccu->policy.control;
+	u32 offset;
+	u32 go_bit;
+	u32 mask;
+	bool ret;
+
+	/* If we don't need to control policy for this CCU, we're done. */
+	if (!policy_ctl_exists(control))
+		return true;
+
+	offset = control->offset;
+	go_bit = control->go_bit;
+
+	/* Ensure we're not busy before we start */
+	ret = __ccu_wait_bit(ccu, offset, go_bit, false);
+	if (!ret) {
+		pr_err("%s: ccu %s policy engine wouldn't go idle\n",
+			__func__, ccu->name);
+		return false;
+	}
+
+	/*
+	 * If it's a synchronous request, we'll wait for the voltage
+	 * and frequency of the active load to stabilize before
+	 * returning.  To do this we select the active load by
+	 * setting the ATL bit.
+	 *
+	 * An asynchronous request instead ramps the voltage in the
+	 * background, and when that process stabilizes, the target
+	 * load is copied to the active load and the CCU frequency
+	 * is switched.  We do this by selecting the target load
+	 * (ATL bit clear) and setting the request auto-copy (AC bit
+	 * set).
+	 *
+	 * Note, we do NOT read-modify-write this register.
+	 */
+	mask = (u32)1 << go_bit;
+	if (sync)
+		mask |= 1 << control->atl_bit;
+	else
+		mask |= 1 << control->ac_bit;
+	__ccu_write(ccu, offset, mask);
+
+	/* Wait for indication that operation is complete. */
+	ret = __ccu_wait_bit(ccu, offset, go_bit, false);
+	if (!ret)
+		pr_err("%s: ccu %s policy engine never started\n",
+			__func__, ccu->name);
+
+	return ret;
+}
+
+static bool __ccu_policy_engine_stop(struct ccu_data *ccu)
+{
+	struct bcm_lvm_en *enable = &ccu->policy.enable;
+	u32 offset;
+	u32 enable_bit;
+	bool ret;
+
+	/* If we don't need to control policy for this CCU, we're done. */
+	if (!policy_lvm_en_exists(enable))
+		return true;
+
+	/* Ensure we're not busy before we start */
+	offset = enable->offset;
+	enable_bit = enable->bit;
+	ret = __ccu_wait_bit(ccu, offset, enable_bit, false);
+	if (!ret) {
+		pr_err("%s: ccu %s policy engine already stopped\n",
+			__func__, ccu->name);
+		return false;
+	}
+
+	/* Now set the bit to stop the engine (NO read-modify-write) */
+	__ccu_write(ccu, offset, (u32)1 << enable_bit);
+
+	/* Wait for indication that it has stopped. */
+	ret = __ccu_wait_bit(ccu, offset, enable_bit, false);
+	if (!ret)
+		pr_err("%s: ccu %s policy engine never stopped\n",
+			__func__, ccu->name);
+
+	return ret;
+}
+
+/*
+ * A CCU has four operating conditions ("policies"), and some clocks
+ * can be disabled or enabled based on which policy is currently in
+ * effect.  Such clocks have a bit in a "policy mask" register for
+ * each policy indicating whether the clock is enabled for that
+ * policy or not.  The bit position for a clock is the same for all
+ * four registers, and the 32-bit registers are at consecutive
+ * addresses.
+ */
+static bool policy_init(struct ccu_data *ccu, struct bcm_clk_policy *policy)
+{
+	u32 offset;
+	u32 mask;
+	int i;
+	bool ret;
+
+	if (!policy_exists(policy))
+		return true;
+
+	/*
+	 * We need to stop the CCU policy engine to allow update
+	 * of our policy bits.
+	 */
+	if (!__ccu_policy_engine_stop(ccu)) {
+		pr_err("%s: unable to stop CCU %s policy engine\n",
+			__func__, ccu->name);
+		return false;
+	}
+
+	/*
+	 * For now, if a clock defines its policy bit we just mark
+	 * it "enabled" for all four policies.
+	 */
+	offset = policy->offset;
+	mask = (u32)1 << policy->bit;
+	for (i = 0; i < CCU_POLICY_COUNT; i++) {
+		u32 reg_val;
+
+		reg_val = __ccu_read(ccu, offset);
+		reg_val |= mask;
+		__ccu_write(ccu, offset, reg_val);
+		offset += sizeof(u32);
+	}
+
+	/* We're done updating; fire up the policy engine again. */
+	ret = __ccu_policy_engine_start(ccu, true);
+	if (!ret)
+		pr_err("%s: unable to restart CCU %s policy engine\n",
+			__func__, ccu->name);
+
+	return ret;
+}
+
+/* Gate operations */
+
+/* Determine whether a clock is gated.  CCU lock must be held.  */
+static bool
+__is_clk_gate_enabled(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+	u32 bit_mask;
+	u32 reg_val;
+
+	/* If there is no gate we can assume it's enabled. */
+	if (!gate_exists(gate))
+		return true;
+
+	bit_mask = 1 << gate->status_bit;
+	reg_val = __ccu_read(ccu, gate->offset);
+
+	return (reg_val & bit_mask) != 0;
+}
+
+/* Determine whether a clock is gated. */
+static bool
+is_clk_gate_enabled(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+	long flags;
+	bool ret;
+
+	/* Avoid taking the lock if we can */
+	if (!gate_exists(gate))
+		return true;
+
+	flags = ccu_lock(ccu);
+	ret = __is_clk_gate_enabled(ccu, gate);
+	ccu_unlock(ccu, flags);
+
+	return ret;
+}
+
+/*
+ * Commit our desired gate state to the hardware.
+ * Returns true if successful, false otherwise.
+ */
+static bool
+__gate_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+	u32 reg_val;
+	u32 mask;
+	bool enabled = false;
+
+	BUG_ON(!gate_exists(gate));
+	if (!gate_is_sw_controllable(gate))
+		return true;		/* Nothing we can change */
+
+	reg_val = __ccu_read(ccu, gate->offset);
+
+	/* For a hardware/software gate, set which is in control */
+	if (gate_is_hw_controllable(gate)) {
+		mask = (u32)1 << gate->hw_sw_sel_bit;
+		if (gate_is_sw_managed(gate))
+			reg_val |= mask;
+		else
+			reg_val &= ~mask;
+	}
+
+	/*
+	 * If software is in control, enable or disable the gate.
+	 * If hardware is, clear the enabled bit for good measure.
+	 * If a software controlled gate can't be disabled, we're
+	 * required to write a 0 into the enable bit (but the gate
+	 * will be enabled).
+	 */
+	mask = (u32)1 << gate->en_bit;
+	if (gate_is_sw_managed(gate) && (enabled = gate_is_enabled(gate)) &&
+			!gate_is_no_disable(gate))
+		reg_val |= mask;
+	else
+		reg_val &= ~mask;
+
+	__ccu_write(ccu, gate->offset, reg_val);
+
+	/* For a hardware controlled gate, we're done */
+	if (!gate_is_sw_managed(gate))
+		return true;
+
+	/* Otherwise wait for the gate to be in desired state */
+	return __ccu_wait_bit(ccu, gate->offset, gate->status_bit, enabled);
+}
+
+/*
+ * Initialize a gate.  Our desired state (hardware/software select,
+ * and if software, its enable state) is committed to hardware
+ * without the usual checks to see if it's already set up that way.
+ * Returns true if successful, false otherwise.
+ */
+static bool gate_init(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+	if (!gate_exists(gate))
+		return true;
+	return __gate_commit(ccu, gate);
+}
+
+/*
+ * Set a gate to enabled or disabled state.  Does nothing if the
+ * gate is not currently under software control, or if it is already
+ * in the requested state.  Returns true if successful, false
+ * otherwise.  CCU lock must be held.
+ */
+static bool
+__clk_gate(struct ccu_data *ccu, struct bcm_clk_gate *gate, bool enable)
+{
+	bool ret;
+
+	if (!gate_exists(gate) || !gate_is_sw_managed(gate))
+		return true;	/* Nothing to do */
+
+	if (!enable && gate_is_no_disable(gate)) {
+		pr_warn("%s: invalid gate disable request (ignoring)\n",
+			__func__);
+		return true;
+	}
+
+	if (enable == gate_is_enabled(gate))
+		return true;	/* No change */
+
+	gate_flip_enabled(gate);
+	ret = __gate_commit(ccu, gate);
+	if (!ret)
+		gate_flip_enabled(gate);	/* Revert the change */
+
+	return ret;
+}
+
+/* Enable or disable a gate.  Returns 0 if successful, -EIO otherwise */
+static int clk_gate(struct ccu_data *ccu, const char *name,
+			struct bcm_clk_gate *gate, bool enable)
+{
+	unsigned long flags;
+	bool success;
+
+	/*
+	 * Avoid taking the lock if we can.  We quietly ignore
+	 * requests to change state that don't make sense.
+	 */
+	if (!gate_exists(gate) || !gate_is_sw_managed(gate))
+		return 0;
+	if (!enable && gate_is_no_disable(gate))
+		return 0;
+
+	flags = ccu_lock(ccu);
+	__ccu_write_enable(ccu);
+
+	success = __clk_gate(ccu, gate, enable);
+
+	__ccu_write_disable(ccu);
+	ccu_unlock(ccu, flags);
+
+	if (success)
+		return 0;
+
+	pr_err("%s: failed to %s gate for %s\n", __func__,
+		enable ? "enable" : "disable", name);
+
+	return -EIO;
+}
+
+/* Hysteresis operations */
+
+/*
+ * If a clock gate requires a turn-off delay it will have
+ * "hysteresis" register bits defined.  The first, if set, enables
+ * the delay; and if enabled, the second bit determines whether the
+ * delay is "low" or "high" (1 means high).  For now, if it's
+ * defined for a clock, we set it.
+ */
+static bool hyst_init(struct ccu_data *ccu, struct bcm_clk_hyst *hyst)
+{
+	u32 offset;
+	u32 reg_val;
+	u32 mask;
+
+	if (!hyst_exists(hyst))
+		return true;
+
+	offset = hyst->offset;
+	mask = (u32)1 << hyst->en_bit;
+	mask |= (u32)1 << hyst->val_bit;
+
+	reg_val = __ccu_read(ccu, offset);
+	reg_val |= mask;
+	__ccu_write(ccu, offset, reg_val);
+
+	return true;
+}
+
+/* Trigger operations */
+
+/*
+ * Caller must ensure CCU lock is held and access is enabled.
+ * Returns true if successful, false otherwise.
+ */
+static bool __clk_trigger(struct ccu_data *ccu, struct bcm_clk_trig *trig)
+{
+	/* Trigger the clock and wait for it to finish */
+	__ccu_write(ccu, trig->offset, 1 << trig->bit);
+
+	return __ccu_wait_bit(ccu, trig->offset, trig->bit, false);
+}
+
+/* Divider operations */
+
+/* Read a divider value and return the scaled divisor it represents. */
+static u64 divider_read_scaled(struct ccu_data *ccu, struct bcm_clk_div *div)
+{
+	unsigned long flags;
+	u32 reg_val;
+	u32 reg_div;
+
+	if (divider_is_fixed(div))
+		return (u64)div->u.fixed;
+
+	flags = ccu_lock(ccu);
+	reg_val = __ccu_read(ccu, div->u.s.offset);
+	ccu_unlock(ccu, flags);
+
+	/* Extract the full divider field from the register value */
+	reg_div = bitfield_extract(reg_val, div->u.s.shift, div->u.s.width);
+
+	/* Return the scaled divisor value it represents */
+	return scaled_div_value(div, reg_div);
+}
+
+/*
+ * Convert a divider's scaled divisor value into its recorded form
+ * and commit it into the hardware divider register.
+ *
+ * Returns 0 on success.  Returns -EINVAL for invalid arguments.
+ * Returns -ENXIO if gating failed, and -EIO if a trigger failed.
+ */
+static int __div_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+			struct bcm_clk_div *div, struct bcm_clk_trig *trig)
+{
+	bool enabled;
+	u32 reg_div;
+	u32 reg_val;
+	int ret = 0;
+
+	BUG_ON(divider_is_fixed(div));
+
+	/*
+	 * If we're just initializing the divider, and no initial
+	 * state was defined in the device tree, we just find out
+	 * what its current value is rather than updating it.
+	 */
+	if (div->u.s.scaled_div == BAD_SCALED_DIV_VALUE) {
+		reg_val = __ccu_read(ccu, div->u.s.offset);
+		reg_div = bitfield_extract(reg_val, div->u.s.shift,
+						div->u.s.width);
+		div->u.s.scaled_div = scaled_div_value(div, reg_div);
+
+		return 0;
+	}
+
+	/* Convert the scaled divisor to the value we need to record */
+	reg_div = divider(div, div->u.s.scaled_div);
+
+	/* Clock needs to be enabled before changing the rate */
+	enabled = __is_clk_gate_enabled(ccu, gate);
+	if (!enabled && !__clk_gate(ccu, gate, true)) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	/* Replace the divider value and record the result */
+	reg_val = __ccu_read(ccu, div->u.s.offset);
+	reg_val = bitfield_replace(reg_val, div->u.s.shift, div->u.s.width,
+					reg_div);
+	__ccu_write(ccu, div->u.s.offset, reg_val);
+
+	/* If the trigger fails we still want to disable the gate */
+	if (!__clk_trigger(ccu, trig))
+		ret = -EIO;
+
+	/* Disable the clock again if it was disabled to begin with */
+	if (!enabled && !__clk_gate(ccu, gate, false))
+		ret = ret ? ret : -ENXIO;	/* return first error */
+out:
+	return ret;
+}
+
+/*
+ * Initialize a divider by committing our desired state to hardware
+ * without the usual checks to see if it's already set up that way.
+ * Returns true if successful, false otherwise.
+ */
+static bool div_init(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+			struct bcm_clk_div *div, struct bcm_clk_trig *trig)
+{
+	if (!divider_exists(div) || divider_is_fixed(div))
+		return true;
+	return !__div_commit(ccu, gate, div, trig);
+}
+
+static int divider_write(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+			struct bcm_clk_div *div, struct bcm_clk_trig *trig,
+			u64 scaled_div)
+{
+	unsigned long flags;
+	u64 previous;
+	int ret;
+
+	BUG_ON(divider_is_fixed(div));
+
+	previous = div->u.s.scaled_div;
+	if (previous == scaled_div)
+		return 0;	/* No change */
+
+	div->u.s.scaled_div = scaled_div;
+
+	flags = ccu_lock(ccu);
+	__ccu_write_enable(ccu);
+
+	ret = __div_commit(ccu, gate, div, trig);
+
+	__ccu_write_disable(ccu);
+	ccu_unlock(ccu, flags);
+
+	if (ret)
+		div->u.s.scaled_div = previous;		/* Revert the change */
+
+	return ret;
+
+}
+
+/* Common clock rate helpers */
+
+/*
+ * Implement the common clock framework recalc_rate method, taking
+ * into account a divider and an optional pre-divider.  The
+ * pre-divider register pointer may be NULL.
+ */
+static unsigned long clk_recalc_rate(struct ccu_data *ccu,
+			struct bcm_clk_div *div, struct bcm_clk_div *pre_div,
+			unsigned long parent_rate)
+{
+	u64 scaled_parent_rate;
+	u64 scaled_div;
+	u64 result;
+
+	if (!divider_exists(div))
+		return parent_rate;
+
+	if (parent_rate > (unsigned long)LONG_MAX)
+		return 0;	/* actually this would be a caller bug */
+
+	/*
+	 * If there is a pre-divider, divide the scaled parent rate
+	 * by the pre-divider value first.  In this case--to improve
+	 * accuracy--scale the parent rate by *both* the pre-divider
+	 * value and the divider before actually computing the
+	 * result of the pre-divider.
+	 *
+	 * If there's only one divider, just scale the parent rate.
+	 */
+	if (pre_div && divider_exists(pre_div)) {
+		u64 scaled_rate;
+
+		scaled_rate = scale_rate(pre_div, parent_rate);
+		scaled_rate = scale_rate(div, scaled_rate);
+		scaled_div = divider_read_scaled(ccu, pre_div);
+		scaled_parent_rate = DIV_ROUND_CLOSEST_ULL(scaled_rate,
+							scaled_div);
+	} else  {
+		scaled_parent_rate = scale_rate(div, parent_rate);
+	}
+
+	/*
+	 * Get the scaled divisor value, and divide the scaled
+	 * parent rate by that to determine this clock's resulting
+	 * rate.
+	 */
+	scaled_div = divider_read_scaled(ccu, div);
+	result = DIV_ROUND_CLOSEST_ULL(scaled_parent_rate, scaled_div);
+
+	return (unsigned long)result;
+}
+
+/*
+ * Compute the output rate produced when a given parent rate is fed
+ * into two dividers.  The pre-divider can be NULL, and even if it's
+ * non-null it may be nonexistent.  It's also OK for the divider to
+ * be nonexistent, and in that case the pre-divider is also ignored.
+ *
+ * If scaled_div is non-null, it is used to return the scaled divisor
+ * value used by the (downstream) divider to produce that rate.
+ */
+static long round_rate(struct ccu_data *ccu, struct bcm_clk_div *div,
+				struct bcm_clk_div *pre_div,
+				unsigned long rate, unsigned long parent_rate,
+				u64 *scaled_div)
+{
+	u64 scaled_parent_rate;
+	u64 min_scaled_div;
+	u64 max_scaled_div;
+	u64 best_scaled_div;
+	u64 result;
+
+	BUG_ON(!divider_exists(div));
+	BUG_ON(!rate);
+	BUG_ON(parent_rate > (u64)LONG_MAX);
+
+	/*
+	 * If there is a pre-divider, divide the scaled parent rate
+	 * by the pre-divider value first.  In this case--to improve
+	 * accuracy--scale the parent rate by *both* the pre-divider
+	 * value and the divider before actually computing the
+	 * result of the pre-divider.
+	 *
+	 * If there's only one divider, just scale the parent rate.
+	 *
+	 * For simplicity we treat the pre-divider as fixed (for now).
+	 */
+	if (divider_exists(pre_div)) {
+		u64 scaled_rate;
+		u64 scaled_pre_div;
+
+		scaled_rate = scale_rate(pre_div, parent_rate);
+		scaled_rate = scale_rate(div, scaled_rate);
+		scaled_pre_div = divider_read_scaled(ccu, pre_div);
+		scaled_parent_rate = DIV_ROUND_CLOSEST_ULL(scaled_rate,
+							scaled_pre_div);
+	} else {
+		scaled_parent_rate = scale_rate(div, parent_rate);
+	}
+
+	/*
+	 * Compute the best possible divider and ensure it is in
+	 * range.  A fixed divider can't be changed, so just report
+	 * the best we can do.
+	 */
+	if (!divider_is_fixed(div)) {
+		best_scaled_div = DIV_ROUND_CLOSEST_ULL(scaled_parent_rate,
+							rate);
+		min_scaled_div = scaled_div_min(div);
+		max_scaled_div = scaled_div_max(div);
+		if (best_scaled_div > max_scaled_div)
+			best_scaled_div = max_scaled_div;
+		else if (best_scaled_div < min_scaled_div)
+			best_scaled_div = min_scaled_div;
+	} else {
+		best_scaled_div = divider_read_scaled(ccu, div);
+	}
+
+	/* OK, figure out the resulting rate */
+	result = DIV_ROUND_CLOSEST_ULL(scaled_parent_rate, best_scaled_div);
+
+	if (scaled_div)
+		*scaled_div = best_scaled_div;
+
+	return (long)result;
+}
+
+/* Common clock parent helpers */
+
+/*
+ * For a given parent selector (register field) value, find the
+ * index into a selector's parent_sel array that contains it.
+ * Returns the index, or BAD_CLK_INDEX if it's not found.
+ */
+static u8 parent_index(struct bcm_clk_sel *sel, u8 parent_sel)
+{
+	u8 i;
+
+	BUG_ON(sel->parent_count > (u32)U8_MAX);
+	for (i = 0; i < sel->parent_count; i++)
+		if (sel->parent_sel[i] == parent_sel)
+			return i;
+	return BAD_CLK_INDEX;
+}
+
+/*
+ * Fetch the current value of the selector, and translate that into
+ * its corresponding index in the parent array we registered with
+ * the clock framework.
+ *
+ * Returns parent array index that corresponds with the value found,
+ * or BAD_CLK_INDEX if the found value is out of range.
+ */
+static u8 selector_read_index(struct ccu_data *ccu, struct bcm_clk_sel *sel)
+{
+	unsigned long flags;
+	u32 reg_val;
+	u32 parent_sel;
+	u8 index;
+
+	/* If there's no selector, there's only one parent */
+	if (!selector_exists(sel))
+		return 0;
+
+	/* Get the value in the selector register */
+	flags = ccu_lock(ccu);
+	reg_val = __ccu_read(ccu, sel->offset);
+	ccu_unlock(ccu, flags);
+
+	parent_sel = bitfield_extract(reg_val, sel->shift, sel->width);
+
+	/* Look up that selector's parent array index and return it */
+	index = parent_index(sel, parent_sel);
+	if (index == BAD_CLK_INDEX)
+		pr_err("%s: out-of-range parent selector %u (%s 0x%04x)\n",
+			__func__, parent_sel, ccu->name, sel->offset);
+
+	return index;
+}
+
+/*
+ * Commit our desired selector value to the hardware.
+ *
+ * Returns 0 on success.  Returns -EINVAL for invalid arguments.
+ * Returns -ENXIO if gating failed, and -EIO if a trigger failed.
+ */
+static int
+__sel_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+			struct bcm_clk_sel *sel, struct bcm_clk_trig *trig)
+{
+	u32 parent_sel;
+	u32 reg_val;
+	bool enabled;
+	int ret = 0;
+
+	BUG_ON(!selector_exists(sel));
+
+	/*
+	 * If we're just initializing the selector, and no initial
+	 * state was defined in the device tree, we just find out
+	 * what its current value is rather than updating it.
+	 */
+	if (sel->clk_index == BAD_CLK_INDEX) {
+		u8 index;
+
+		reg_val = __ccu_read(ccu, sel->offset);
+		parent_sel = bitfield_extract(reg_val, sel->shift, sel->width);
+		index = parent_index(sel, parent_sel);
+		if (index == BAD_CLK_INDEX)
+			return -EINVAL;
+		sel->clk_index = index;
+
+		return 0;
+	}
+
+	BUG_ON((u32)sel->clk_index >= sel->parent_count);
+	parent_sel = sel->parent_sel[sel->clk_index];
+
+	/* Clock needs to be enabled before changing the parent */
+	enabled = __is_clk_gate_enabled(ccu, gate);
+	if (!enabled && !__clk_gate(ccu, gate, true))
+		return -ENXIO;
+
+	/* Replace the selector value and record the result */
+	reg_val = __ccu_read(ccu, sel->offset);
+	reg_val = bitfield_replace(reg_val, sel->shift, sel->width, parent_sel);
+	__ccu_write(ccu, sel->offset, reg_val);
+
+	/* If the trigger fails we still want to disable the gate */
+	if (!__clk_trigger(ccu, trig))
+		ret = -EIO;
+
+	/* Disable the clock again if it was disabled to begin with */
+	if (!enabled && !__clk_gate(ccu, gate, false))
+		ret = ret ? ret : -ENXIO;	/* return first error */
+
+	return ret;
+}
+
+/*
+ * Initialize a selector by committing our desired state to hardware
+ * without the usual checks to see if it's already set up that way.
+ * Returns true if successful, false otherwise.
+ */
+static bool sel_init(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+			struct bcm_clk_sel *sel, struct bcm_clk_trig *trig)
+{
+	if (!selector_exists(sel))
+		return true;
+	return !__sel_commit(ccu, gate, sel, trig);
+}
+
+/*
+ * Write a new value into a selector register to switch to a
+ * different parent clock.  Returns 0 on success, or an error code
+ * (from __sel_commit()) otherwise.
+ */
+static int selector_write(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+			struct bcm_clk_sel *sel, struct bcm_clk_trig *trig,
+			u8 index)
+{
+	unsigned long flags;
+	u8 previous;
+	int ret;
+
+	previous = sel->clk_index;
+	if (previous == index)
+		return 0;	/* No change */
+
+	sel->clk_index = index;
+
+	flags = ccu_lock(ccu);
+	__ccu_write_enable(ccu);
+
+	ret = __sel_commit(ccu, gate, sel, trig);
+
+	__ccu_write_disable(ccu);
+	ccu_unlock(ccu, flags);
+
+	if (ret)
+		sel->clk_index = previous;	/* Revert the change */
+
+	return ret;
+}
+
+/* Clock operations */
+
+static int kona_peri_clk_enable(struct clk_hw *hw)
+{
+	struct kona_clk *bcm_clk = to_kona_clk(hw);
+	struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate;
+
+	return clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, true);
+}
+
+static void kona_peri_clk_disable(struct clk_hw *hw)
+{
+	struct kona_clk *bcm_clk = to_kona_clk(hw);
+	struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate;
+
+	(void)clk_gate(bcm_clk->ccu, bcm_clk->init_data.name, gate, false);
+}
+
+static int kona_peri_clk_is_enabled(struct clk_hw *hw)
+{
+	struct kona_clk *bcm_clk = to_kona_clk(hw);
+	struct bcm_clk_gate *gate = &bcm_clk->u.peri->gate;
+
+	return is_clk_gate_enabled(bcm_clk->ccu, gate) ? 1 : 0;
+}
+
+static unsigned long kona_peri_clk_recalc_rate(struct clk_hw *hw,
+			unsigned long parent_rate)
+{
+	struct kona_clk *bcm_clk = to_kona_clk(hw);
+	struct peri_clk_data *data = bcm_clk->u.peri;
+
+	return clk_recalc_rate(bcm_clk->ccu, &data->div, &data->pre_div,
+				parent_rate);
+}
+
+static long kona_peri_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+			unsigned long *parent_rate)
+{
+	struct kona_clk *bcm_clk = to_kona_clk(hw);
+	struct bcm_clk_div *div = &bcm_clk->u.peri->div;
+
+	if (!divider_exists(div))
+		return clk_hw_get_rate(hw);
+
+	/* Quietly avoid a zero rate */
+	return round_rate(bcm_clk->ccu, div, &bcm_clk->u.peri->pre_div,
+				rate ? rate : 1, *parent_rate, NULL);
+}
+
+static int kona_peri_clk_determine_rate(struct clk_hw *hw,
+					struct clk_rate_request *req)
+{
+	struct kona_clk *bcm_clk = to_kona_clk(hw);
+	struct clk_hw *current_parent;
+	unsigned long parent_rate;
+	unsigned long best_delta;
+	unsigned long best_rate;
+	u32 parent_count;
+	long rate;
+	u32 which;
+
+	/*
+	 * If there is no other parent to choose, use the current one.
+	 * Note:  We don't honor (or use) CLK_SET_RATE_NO_REPARENT.
+	 */
+	WARN_ON_ONCE(bcm_clk->init_data.flags & CLK_SET_RATE_NO_REPARENT);
+	parent_count = (u32)bcm_clk->init_data.num_parents;
+	if (parent_count < 2) {
+		rate = kona_peri_clk_round_rate(hw, req->rate,
+						&req->best_parent_rate);
+		if (rate < 0)
+			return rate;
+
+		req->rate = rate;
+		return 0;
+	}
+
+	/* Unless we can do better, stick with current parent */
+	current_parent = clk_hw_get_parent(hw);
+	parent_rate = clk_hw_get_rate(current_parent);
+	best_rate = kona_peri_clk_round_rate(hw, req->rate, &parent_rate);
+	best_delta = abs(best_rate - req->rate);
+
+	/* Check whether any other parent clock can produce a better result */
+	for (which = 0; which < parent_count; which++) {
+		struct clk_hw *parent = clk_hw_get_parent_by_index(hw, which);
+		unsigned long delta;
+		unsigned long other_rate;
+
+		BUG_ON(!parent);
+		if (parent == current_parent)
+			continue;
+
+		/* We don't support CLK_SET_RATE_PARENT */
+		parent_rate = clk_hw_get_rate(parent);
+		other_rate = kona_peri_clk_round_rate(hw, req->rate,
+						      &parent_rate);
+		delta = abs(other_rate - req->rate);
+		if (delta < best_delta) {
+			best_delta = delta;
+			best_rate = other_rate;
+			req->best_parent_hw = parent;
+			req->best_parent_rate = parent_rate;
+		}
+	}
+
+	req->rate = best_rate;
+	return 0;
+}
+
+static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct kona_clk *bcm_clk = to_kona_clk(hw);
+	struct peri_clk_data *data = bcm_clk->u.peri;
+	struct bcm_clk_sel *sel = &data->sel;
+	struct bcm_clk_trig *trig;
+	int ret;
+
+	BUG_ON(index >= sel->parent_count);
+
+	/* If there's only one parent we don't require a selector */
+	if (!selector_exists(sel))
+		return 0;
+
+	/*
+	 * The regular trigger is used by default, but if there's a
+	 * pre-trigger we want to use that instead.
+	 */
+	trig = trigger_exists(&data->pre_trig) ? &data->pre_trig
+					       : &data->trig;
+
+	ret = selector_write(bcm_clk->ccu, &data->gate, sel, trig, index);
+	if (ret == -ENXIO) {
+		pr_err("%s: gating failure for %s\n", __func__,
+			bcm_clk->init_data.name);
+		ret = -EIO;	/* Don't proliferate weird errors */
+	} else if (ret == -EIO) {
+		pr_err("%s: %strigger failed for %s\n", __func__,
+			trig == &data->pre_trig ? "pre-" : "",
+			bcm_clk->init_data.name);
+	}
+
+	return ret;
+}
+
+static u8 kona_peri_clk_get_parent(struct clk_hw *hw)
+{
+	struct kona_clk *bcm_clk = to_kona_clk(hw);
+	struct peri_clk_data *data = bcm_clk->u.peri;
+	u8 index;
+
+	index = selector_read_index(bcm_clk->ccu, &data->sel);
+
+	/* Not all callers would handle an out-of-range value gracefully */
+	return index == BAD_CLK_INDEX ? 0 : index;
+}
+
+static int kona_peri_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+			unsigned long parent_rate)
+{
+	struct kona_clk *bcm_clk = to_kona_clk(hw);
+	struct peri_clk_data *data = bcm_clk->u.peri;
+	struct bcm_clk_div *div = &data->div;
+	u64 scaled_div = 0;
+	int ret;
+
+	if (parent_rate > (unsigned long)LONG_MAX)
+		return -EINVAL;
+
+	if (rate == clk_hw_get_rate(hw))
+		return 0;
+
+	if (!divider_exists(div))
+		return rate == parent_rate ? 0 : -EINVAL;
+
+	/*
+	 * A fixed divider can't be changed.  (Nor can a fixed
+	 * pre-divider be, but for now we never actually try to
+	 * change that.)  Tolerate a request for a no-op change.
+	 */
+	if (divider_is_fixed(&data->div))
+		return rate == parent_rate ? 0 : -EINVAL;
+
+	/*
+	 * Get the scaled divisor value needed to achieve a clock
+	 * rate as close as possible to what was requested, given
+	 * the parent clock rate supplied.
+	 */
+	(void)round_rate(bcm_clk->ccu, div, &data->pre_div,
+				rate ? rate : 1, parent_rate, &scaled_div);
+
+	/*
+	 * We aren't updating any pre-divider at this point, so
+	 * we'll use the regular trigger.
+	 */
+	ret = divider_write(bcm_clk->ccu, &data->gate, &data->div,
+				&data->trig, scaled_div);
+	if (ret == -ENXIO) {
+		pr_err("%s: gating failure for %s\n", __func__,
+			bcm_clk->init_data.name);
+		ret = -EIO;	/* Don't proliferate weird errors */
+	} else if (ret == -EIO) {
+		pr_err("%s: trigger failed for %s\n", __func__,
+			bcm_clk->init_data.name);
+	}
+
+	return ret;
+}
+
+struct clk_ops kona_peri_clk_ops = {
+	.enable = kona_peri_clk_enable,
+	.disable = kona_peri_clk_disable,
+	.is_enabled = kona_peri_clk_is_enabled,
+	.recalc_rate = kona_peri_clk_recalc_rate,
+	.determine_rate = kona_peri_clk_determine_rate,
+	.set_parent = kona_peri_clk_set_parent,
+	.get_parent = kona_peri_clk_get_parent,
+	.set_rate = kona_peri_clk_set_rate,
+};
+
+/* Put a peripheral clock into its initial state */
+static bool __peri_clk_init(struct kona_clk *bcm_clk)
+{
+	struct ccu_data *ccu = bcm_clk->ccu;
+	struct peri_clk_data *peri = bcm_clk->u.peri;
+	const char *name = bcm_clk->init_data.name;
+	struct bcm_clk_trig *trig;
+
+	BUG_ON(bcm_clk->type != bcm_clk_peri);
+
+	if (!policy_init(ccu, &peri->policy)) {
+		pr_err("%s: error initializing policy for %s\n",
+			__func__, name);
+		return false;
+	}
+	if (!gate_init(ccu, &peri->gate)) {
+		pr_err("%s: error initializing gate for %s\n", __func__, name);
+		return false;
+	}
+	if (!hyst_init(ccu, &peri->hyst)) {
+		pr_err("%s: error initializing hyst for %s\n", __func__, name);
+		return false;
+	}
+	if (!div_init(ccu, &peri->gate, &peri->div, &peri->trig)) {
+		pr_err("%s: error initializing divider for %s\n", __func__,
+			name);
+		return false;
+	}
+
+	/*
+	 * For the pre-divider and selector, the pre-trigger is used
+	 * if it's present, otherwise we just use the regular trigger.
+	 */
+	trig = trigger_exists(&peri->pre_trig) ? &peri->pre_trig
+					       : &peri->trig;
+
+	if (!div_init(ccu, &peri->gate, &peri->pre_div, trig)) {
+		pr_err("%s: error initializing pre-divider for %s\n", __func__,
+			name);
+		return false;
+	}
+
+	if (!sel_init(ccu, &peri->gate, &peri->sel, trig)) {
+		pr_err("%s: error initializing selector for %s\n", __func__,
+			name);
+		return false;
+	}
+
+	return true;
+}
+
+static bool __kona_clk_init(struct kona_clk *bcm_clk)
+{
+	switch (bcm_clk->type) {
+	case bcm_clk_peri:
+		return __peri_clk_init(bcm_clk);
+	default:
+		BUG();
+	}
+	return false;
+}
+
+/* Set a CCU and all its clocks into their desired initial state */
+bool __init kona_ccu_init(struct ccu_data *ccu)
+{
+	unsigned long flags;
+	unsigned int which;
+	struct kona_clk *kona_clks = ccu->kona_clks;
+	bool success = true;
+
+	flags = ccu_lock(ccu);
+	__ccu_write_enable(ccu);
+
+	for (which = 0; which < ccu->clk_num; which++) {
+		struct kona_clk *bcm_clk = &kona_clks[which];
+
+		if (!bcm_clk->ccu)
+			continue;
+
+		success &= __kona_clk_init(bcm_clk);
+	}
+
+	__ccu_write_disable(ccu);
+	ccu_unlock(ccu, flags);
+	return success;
+}
diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
new file mode 100644
index 000000000..f4b39bb55
--- /dev/null
+++ b/drivers/clk/bcm/clk-kona.h
@@ -0,0 +1,510 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLK_KONA_H
+#define _CLK_KONA_H
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+
+#define	BILLION		1000000000
+
+/* The common clock framework uses u8 to represent a parent index */
+#define PARENT_COUNT_MAX	((u32)U8_MAX)
+
+#define BAD_CLK_INDEX		U8_MAX	/* Can't ever be valid */
+#define BAD_CLK_NAME		((const char *)-1)
+
+#define BAD_SCALED_DIV_VALUE	U64_MAX
+
+/*
+ * Utility macros for object flag management.  If possible, flags
+ * should be defined such that 0 is the desired default value.
+ */
+#define FLAG(type, flag)		BCM_CLK_ ## type ## _FLAGS_ ## flag
+#define FLAG_SET(obj, type, flag)	((obj)->flags |= FLAG(type, flag))
+#define FLAG_CLEAR(obj, type, flag)	((obj)->flags &= ~(FLAG(type, flag)))
+#define FLAG_FLIP(obj, type, flag)	((obj)->flags ^= FLAG(type, flag))
+#define FLAG_TEST(obj, type, flag)	(!!((obj)->flags & FLAG(type, flag)))
+
+/* CCU field state tests */
+
+#define ccu_policy_exists(ccu_policy)	((ccu_policy)->enable.offset != 0)
+
+/* Clock field state tests */
+
+#define policy_exists(policy)		((policy)->offset != 0)
+
+#define gate_exists(gate)		FLAG_TEST(gate, GATE, EXISTS)
+#define gate_is_enabled(gate)		FLAG_TEST(gate, GATE, ENABLED)
+#define gate_is_hw_controllable(gate)	FLAG_TEST(gate, GATE, HW)
+#define gate_is_sw_controllable(gate)	FLAG_TEST(gate, GATE, SW)
+#define gate_is_sw_managed(gate)	FLAG_TEST(gate, GATE, SW_MANAGED)
+#define gate_is_no_disable(gate)	FLAG_TEST(gate, GATE, NO_DISABLE)
+
+#define gate_flip_enabled(gate)		FLAG_FLIP(gate, GATE, ENABLED)
+
+#define hyst_exists(hyst)		((hyst)->offset != 0)
+
+#define divider_exists(div)		FLAG_TEST(div, DIV, EXISTS)
+#define divider_is_fixed(div)		FLAG_TEST(div, DIV, FIXED)
+#define divider_has_fraction(div)	(!divider_is_fixed(div) && \
+						(div)->u.s.frac_width > 0)
+
+#define selector_exists(sel)		((sel)->width != 0)
+#define trigger_exists(trig)		FLAG_TEST(trig, TRIG, EXISTS)
+
+#define policy_lvm_en_exists(enable)	((enable)->offset != 0)
+#define policy_ctl_exists(control)	((control)->offset != 0)
+
+/* Clock type, used to tell common block what it's part of */
+enum bcm_clk_type {
+	bcm_clk_none,		/* undefined clock type */
+	bcm_clk_bus,
+	bcm_clk_core,
+	bcm_clk_peri
+};
+
+/*
+ * CCU policy control for clocks.  Clocks can be enabled or disabled
+ * based on the CCU policy in effect.  One bit in each policy mask
+ * register (one per CCU policy) represents whether the clock is
+ * enabled when that policy is effect or not.  The CCU policy engine
+ * must be stopped to update these bits, and must be restarted again
+ * afterward.
+ */
+struct bcm_clk_policy {
+	u32 offset;		/* first policy mask register offset */
+	u32 bit;		/* bit used in all mask registers */
+};
+
+/* Policy initialization macro */
+
+#define POLICY(_offset, _bit)						\
+	{								\
+		.offset = (_offset),					\
+		.bit = (_bit),						\
+	}
+
+/*
+ * Gating control and status is managed by a 32-bit gate register.
+ *
+ * There are several types of gating available:
+ * - (no gate)
+ *     A clock with no gate is assumed to be always enabled.
+ * - hardware-only gating (auto-gating)
+ *     Enabling or disabling clocks with this type of gate is
+ *     managed automatically by the hardware.  Such clocks can be
+ *     considered by the software to be enabled.  The current status
+ *     of auto-gated clocks can be read from the gate status bit.
+ * - software-only gating
+ *     Auto-gating is not available for this type of clock.
+ *     Instead, software manages whether it's enabled by setting or
+ *     clearing the enable bit.  The current gate status of a gate
+ *     under software control can be read from the gate status bit.
+ *     To ensure a change to the gating status is complete, the
+ *     status bit can be polled to verify that the gate has entered
+ *     the desired state.
+ * - selectable hardware or software gating
+ *     Gating for this type of clock can be configured to be either
+ *     under software or hardware control.  Which type is in use is
+ *     determined by the hw_sw_sel bit of the gate register.
+ */
+struct bcm_clk_gate {
+	u32 offset;		/* gate register offset */
+	u32 status_bit;		/* 0: gate is disabled; 0: gatge is enabled */
+	u32 en_bit;		/* 0: disable; 1: enable */
+	u32 hw_sw_sel_bit;	/* 0: hardware gating; 1: software gating */
+	u32 flags;		/* BCM_CLK_GATE_FLAGS_* below */
+};
+
+/*
+ * Gate flags:
+ *   HW         means this gate can be auto-gated
+ *   SW         means the state of this gate can be software controlled
+ *   NO_DISABLE means this gate is (only) enabled if under software control
+ *   SW_MANAGED means the status of this gate is under software control
+ *   ENABLED    means this software-managed gate is *supposed* to be enabled
+ */
+#define BCM_CLK_GATE_FLAGS_EXISTS	((u32)1 << 0)	/* Gate is valid */
+#define BCM_CLK_GATE_FLAGS_HW		((u32)1 << 1)	/* Can auto-gate */
+#define BCM_CLK_GATE_FLAGS_SW		((u32)1 << 2)	/* Software control */
+#define BCM_CLK_GATE_FLAGS_NO_DISABLE	((u32)1 << 3)	/* HW or enabled */
+#define BCM_CLK_GATE_FLAGS_SW_MANAGED	((u32)1 << 4)	/* SW now in control */
+#define BCM_CLK_GATE_FLAGS_ENABLED	((u32)1 << 5)	/* If SW_MANAGED */
+
+/*
+ * Gate initialization macros.
+ *
+ * Any gate initially under software control will be enabled.
+ */
+
+/* A hardware/software gate initially under software control */
+#define HW_SW_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, SW_MANAGED)|FLAG(GATE, ENABLED)|	\
+			FLAG(GATE, EXISTS),				\
+	}
+
+/* A hardware/software gate initially under hardware control */
+#define HW_SW_GATE_AUTO(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, EXISTS),				\
+	}
+
+/* A hardware-or-enabled gate (enabled if not under hardware control) */
+#define HW_ENABLE_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit)	\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.hw_sw_sel_bit = (_hw_sw_sel_bit),			\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, SW)|			\
+			FLAG(GATE, NO_DISABLE)|FLAG(GATE, EXISTS),	\
+	}
+
+/* A software-only gate */
+#define SW_ONLY_GATE(_offset, _status_bit, _en_bit)			\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.en_bit = (_en_bit),					\
+		.flags = FLAG(GATE, SW)|FLAG(GATE, SW_MANAGED)|		\
+			FLAG(GATE, ENABLED)|FLAG(GATE, EXISTS),		\
+	}
+
+/* A hardware-only gate */
+#define HW_ONLY_GATE(_offset, _status_bit)				\
+	{								\
+		.offset = (_offset),					\
+		.status_bit = (_status_bit),				\
+		.flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS),		\
+	}
+
+/* Gate hysteresis for clocks */
+struct bcm_clk_hyst {
+	u32 offset;		/* hyst register offset (normally CLKGATE) */
+	u32 en_bit;		/* bit used to enable hysteresis */
+	u32 val_bit;		/* if enabled: 0 = low delay; 1 = high delay */
+};
+
+/* Hysteresis initialization macro */
+
+#define HYST(_offset, _en_bit, _val_bit)				\
+	{								\
+		.offset = (_offset),					\
+		.en_bit = (_en_bit),					\
+		.val_bit = (_val_bit),					\
+	}
+
+/*
+ * Each clock can have zero, one, or two dividers which change the
+ * output rate of the clock.  Each divider can be either fixed or
+ * variable.  If there are two dividers, they are the "pre-divider"
+ * and the "regular" or "downstream" divider.  If there is only one,
+ * there is no pre-divider.
+ *
+ * A fixed divider is any non-zero (positive) value, and it
+ * indicates how the input rate is affected by the divider.
+ *
+ * The value of a variable divider is maintained in a sub-field of a
+ * 32-bit divider register.  The position of the field in the
+ * register is defined by its offset and width.  The value recorded
+ * in this field is always 1 less than the value it represents.
+ *
+ * In addition, a variable divider can indicate that some subset
+ * of its bits represent a "fractional" part of the divider.  Such
+ * bits comprise the low-order portion of the divider field, and can
+ * be viewed as representing the portion of the divider that lies to
+ * the right of the decimal point.  Most variable dividers have zero
+ * fractional bits.  Variable dividers with non-zero fraction width
+ * still record a value 1 less than the value they represent; the
+ * added 1 does *not* affect the low-order bit in this case, it
+ * affects the bits above the fractional part only.  (Often in this
+ * code a divider field value is distinguished from the value it
+ * represents by referring to the latter as a "divisor".)
+ *
+ * In order to avoid dealing with fractions, divider arithmetic is
+ * performed using "scaled" values.  A scaled value is one that's
+ * been left-shifted by the fractional width of a divider.  Dividing
+ * a scaled value by a scaled divisor produces the desired quotient
+ * without loss of precision and without any other special handling
+ * for fractions.
+ *
+ * The recorded value of a variable divider can be modified.  To
+ * modify either divider (or both), a clock must be enabled (i.e.,
+ * using its gate).  In addition, a trigger register (described
+ * below) must be used to commit the change, and polled to verify
+ * the change is complete.
+ */
+struct bcm_clk_div {
+	union {
+		struct {	/* variable divider */
+			u32 offset;	/* divider register offset */
+			u32 shift;	/* field shift */
+			u32 width;	/* field width */
+			u32 frac_width;	/* field fraction width */
+
+			u64 scaled_div;	/* scaled divider value */
+		} s;
+		u32 fixed;	/* non-zero fixed divider value */
+	} u;
+	u32 flags;		/* BCM_CLK_DIV_FLAGS_* below */
+};
+
+/*
+ * Divider flags:
+ *   EXISTS means this divider exists
+ *   FIXED means it is a fixed-rate divider
+ */
+#define BCM_CLK_DIV_FLAGS_EXISTS	((u32)1 << 0)	/* Divider is valid */
+#define BCM_CLK_DIV_FLAGS_FIXED		((u32)1 << 1)	/* Fixed-value */
+
+/* Divider initialization macros */
+
+/* A fixed (non-zero) divider */
+#define FIXED_DIVIDER(_value)						\
+	{								\
+		.u.fixed = (_value),					\
+		.flags = FLAG(DIV, EXISTS)|FLAG(DIV, FIXED),		\
+	}
+
+/* A divider with an integral divisor */
+#define DIVIDER(_offset, _shift, _width)				\
+	{								\
+		.u.s.offset = (_offset),				\
+		.u.s.shift = (_shift),					\
+		.u.s.width = (_width),					\
+		.u.s.scaled_div = BAD_SCALED_DIV_VALUE,			\
+		.flags = FLAG(DIV, EXISTS),				\
+	}
+
+/* A divider whose divisor has an integer and fractional part */
+#define FRAC_DIVIDER(_offset, _shift, _width, _frac_width)		\
+	{								\
+		.u.s.offset = (_offset),				\
+		.u.s.shift = (_shift),					\
+		.u.s.width = (_width),					\
+		.u.s.frac_width = (_frac_width),			\
+		.u.s.scaled_div = BAD_SCALED_DIV_VALUE,			\
+		.flags = FLAG(DIV, EXISTS),				\
+	}
+
+/*
+ * Clocks may have multiple "parent" clocks.  If there is more than
+ * one, a selector must be specified to define which of the parent
+ * clocks is currently in use.  The selected clock is indicated in a
+ * sub-field of a 32-bit selector register.  The range of
+ * representable selector values typically exceeds the number of
+ * available parent clocks.  Occasionally the reset value of a
+ * selector field is explicitly set to a (specific) value that does
+ * not correspond to a defined input clock.
+ *
+ * We register all known parent clocks with the common clock code
+ * using a packed array (i.e., no empty slots) of (parent) clock
+ * names, and refer to them later using indexes into that array.
+ * We maintain an array of selector values indexed by common clock
+ * index values in order to map between these common clock indexes
+ * and the selector values used by the hardware.
+ *
+ * Like dividers, a selector can be modified, but to do so a clock
+ * must be enabled, and a trigger must be used to commit the change.
+ */
+struct bcm_clk_sel {
+	u32 offset;		/* selector register offset */
+	u32 shift;		/* field shift */
+	u32 width;		/* field width */
+
+	u32 parent_count;	/* number of entries in parent_sel[] */
+	u32 *parent_sel;	/* array of parent selector values */
+	u8 clk_index;		/* current selected index in parent_sel[] */
+};
+
+/* Selector initialization macro */
+#define SELECTOR(_offset, _shift, _width)				\
+	{								\
+		.offset = (_offset),					\
+		.shift = (_shift),					\
+		.width = (_width),					\
+		.clk_index = BAD_CLK_INDEX,				\
+	}
+
+/*
+ * Making changes to a variable divider or a selector for a clock
+ * requires the use of a trigger.  A trigger is defined by a single
+ * bit within a register.  To signal a change, a 1 is written into
+ * that bit.  To determine when the change has been completed, that
+ * trigger bit is polled; the read value will be 1 while the change
+ * is in progress, and 0 when it is complete.
+ *
+ * Occasionally a clock will have more than one trigger.  In this
+ * case, the "pre-trigger" will be used when changing a clock's
+ * selector and/or its pre-divider.
+ */
+struct bcm_clk_trig {
+	u32 offset;		/* trigger register offset */
+	u32 bit;		/* trigger bit */
+	u32 flags;		/* BCM_CLK_TRIG_FLAGS_* below */
+};
+
+/*
+ * Trigger flags:
+ *   EXISTS means this trigger exists
+ */
+#define BCM_CLK_TRIG_FLAGS_EXISTS	((u32)1 << 0)	/* Trigger is valid */
+
+/* Trigger initialization macro */
+#define TRIGGER(_offset, _bit)						\
+	{								\
+		.offset = (_offset),					\
+		.bit = (_bit),						\
+		.flags = FLAG(TRIG, EXISTS),				\
+	}
+
+struct peri_clk_data {
+	struct bcm_clk_policy policy;
+	struct bcm_clk_gate gate;
+	struct bcm_clk_hyst hyst;
+	struct bcm_clk_trig pre_trig;
+	struct bcm_clk_div pre_div;
+	struct bcm_clk_trig trig;
+	struct bcm_clk_div div;
+	struct bcm_clk_sel sel;
+	const char *clocks[];	/* must be last; use CLOCKS() to declare */
+};
+#define CLOCKS(...)	{ __VA_ARGS__, NULL, }
+#define NO_CLOCKS	{ NULL, }	/* Must use of no parent clocks */
+
+struct kona_clk {
+	struct clk_hw hw;
+	struct clk_init_data init_data;	/* includes name of this clock */
+	struct ccu_data *ccu;	/* ccu this clock is associated with */
+	enum bcm_clk_type type;
+	union {
+		void *data;
+		struct peri_clk_data *peri;
+	} u;
+};
+#define to_kona_clk(_hw) \
+	container_of(_hw, struct kona_clk, hw)
+
+/* Initialization macro for an entry in a CCU's kona_clks[] array. */
+#define KONA_CLK(_ccu_name, _clk_name, _type)				\
+	{								\
+		.init_data	= {					\
+			.name = #_clk_name,				\
+			.ops = &kona_ ## _type ## _clk_ops,		\
+		},							\
+		.ccu		= &_ccu_name ## _ccu_data,		\
+		.type		= bcm_clk_ ## _type,			\
+		.u.data		= &_clk_name ## _data,			\
+	}
+#define LAST_KONA_CLK	{ .type = bcm_clk_none }
+
+/*
+ * CCU policy control.  To enable software update of the policy
+ * tables the CCU policy engine must be stopped by setting the
+ * software update enable bit (LVM_EN).  After an update the engine
+ * is restarted using the GO bit and either the GO_ATL or GO_AC bit.
+ */
+struct bcm_lvm_en {
+	u32 offset;		/* LVM_EN register offset */
+	u32 bit;		/* POLICY_CONFIG_EN bit in register */
+};
+
+/* Policy enable initialization macro */
+#define CCU_LVM_EN(_offset, _bit)					\
+	{								\
+		.offset = (_offset),					\
+		.bit = (_bit),						\
+	}
+
+struct bcm_policy_ctl {
+	u32 offset;		/* POLICY_CTL register offset */
+	u32 go_bit;
+	u32 atl_bit;		/* GO, GO_ATL, and GO_AC bits */
+	u32 ac_bit;
+};
+
+/* Policy control initialization macro */
+#define CCU_POLICY_CTL(_offset, _go_bit, _ac_bit, _atl_bit)		\
+	{								\
+		.offset = (_offset),					\
+		.go_bit = (_go_bit),					\
+		.ac_bit = (_ac_bit),					\
+		.atl_bit = (_atl_bit),					\
+	}
+
+struct ccu_policy {
+	struct bcm_lvm_en enable;
+	struct bcm_policy_ctl control;
+};
+
+/*
+ * Each CCU defines a mapped area of memory containing registers
+ * used to manage clocks implemented by the CCU.  Access to memory
+ * within the CCU's space is serialized by a spinlock.  Before any
+ * (other) address can be written, a special access "password" value
+ * must be written to its WR_ACCESS register (located at the base
+ * address of the range).  We keep track of the name of each CCU as
+ * it is set up, and maintain them in a list.
+ */
+struct ccu_data {
+	void __iomem *base;	/* base of mapped address space */
+	spinlock_t lock;	/* serialization lock */
+	bool write_enabled;	/* write access is currently enabled */
+	struct ccu_policy policy;
+	struct device_node *node;
+	size_t clk_num;
+	const char *name;
+	u32 range;		/* byte range of address space */
+	struct kona_clk kona_clks[];	/* must be last */
+};
+
+/* Initialization for common fields in a Kona ccu_data structure */
+#define KONA_CCU_COMMON(_prefix, _name, _ccuname)			    \
+	.name		= #_name "_ccu",				    \
+	.lock		= __SPIN_LOCK_UNLOCKED(_name ## _ccu_data.lock),    \
+	.clk_num	= _prefix ## _ ## _ccuname ## _CCU_CLOCK_COUNT
+
+/* Exported globals */
+
+extern struct clk_ops kona_peri_clk_ops;
+
+/* Externally visible functions */
+
+extern u64 scaled_div_max(struct bcm_clk_div *div);
+extern u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value,
+				u32 billionths);
+
+extern void __init kona_dt_ccu_setup(struct ccu_data *ccu,
+				struct device_node *node);
+extern bool __init kona_ccu_init(struct ccu_data *ccu);
+
+#endif /* _CLK_KONA_H */
diff --git a/drivers/clk/bcm/clk-ns2.c b/drivers/clk/bcm/clk-ns2.c
new file mode 100644
index 000000000..adc141458
--- /dev/null
+++ b/drivers/clk/bcm/clk-ns2.c
@@ -0,0 +1,288 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/bcm-ns2.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+	.pwr_shift = ps, .iso_shift = is }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+	.p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
+	.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas,    \
+	.ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+	.hold_shift = hs, .bypass_shift = bs }
+
+static const struct iproc_pll_ctrl genpll_scr = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+	.aon = AON_VAL(0x0, 1, 15, 12),
+	.reset = RESET_VAL(0x4, 2, 1),
+	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
+	.ndiv_int = REG_VAL(0x8, 4, 10),
+	.pdiv = REG_VAL(0x8, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+	.status = REG_VAL(0x0, 27, 1),
+};
+
+
+static const struct iproc_clk_ctrl genpll_scr_clk[] = {
+	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+	 * in NS2.  However, it doesn't appear to be used anywhere, so setting
+	 * it to 0.
+	 */
+	[BCM_NS2_GENPLL_SCR_SCR_CLK] = {
+		.channel = BCM_NS2_GENPLL_SCR_SCR_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 18, 12, 0),
+		.mdiv = REG_VAL(0x18, 0, 8),
+	},
+	[BCM_NS2_GENPLL_SCR_FS_CLK] = {
+		.channel = BCM_NS2_GENPLL_SCR_FS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 19, 13, 0),
+		.mdiv = REG_VAL(0x18, 8, 8),
+	},
+	[BCM_NS2_GENPLL_SCR_AUDIO_CLK] = {
+		.channel = BCM_NS2_GENPLL_SCR_AUDIO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 20, 14, 0),
+		.mdiv = REG_VAL(0x14, 0, 8),
+	},
+	[BCM_NS2_GENPLL_SCR_CH3_UNUSED] = {
+		.channel = BCM_NS2_GENPLL_SCR_CH3_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 21, 15, 0),
+		.mdiv = REG_VAL(0x14, 8, 8),
+	},
+	[BCM_NS2_GENPLL_SCR_CH4_UNUSED] = {
+		.channel = BCM_NS2_GENPLL_SCR_CH4_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 22, 16, 0),
+		.mdiv = REG_VAL(0x14, 16, 8),
+	},
+	[BCM_NS2_GENPLL_SCR_CH5_UNUSED] = {
+		.channel = BCM_NS2_GENPLL_SCR_CH5_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 23, 17, 0),
+		.mdiv = REG_VAL(0x14, 24, 8),
+	},
+};
+
+static void __init ns2_genpll_scr_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &genpll_scr, NULL, 0, genpll_scr_clk,
+			    ARRAY_SIZE(genpll_scr_clk));
+}
+CLK_OF_DECLARE(ns2_genpll_src_clk, "brcm,ns2-genpll-scr",
+	       ns2_genpll_scr_clk_init);
+
+static const struct iproc_pll_ctrl genpll_sw = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+	.aon = AON_VAL(0x0, 1, 11, 10),
+	.reset = RESET_VAL(0x4, 2, 1),
+	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 2, 3),
+	.ndiv_int = REG_VAL(0x8, 4, 10),
+	.pdiv = REG_VAL(0x8, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+	.status = REG_VAL(0x0, 13, 1),
+};
+
+static const struct iproc_clk_ctrl genpll_sw_clk[] = {
+	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+	 * in NS2.  However, it doesn't appear to be used anywhere, so setting
+	 * it to 0.
+	 */
+	[BCM_NS2_GENPLL_SW_RPE_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_RPE_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 18, 12, 0),
+		.mdiv = REG_VAL(0x18, 0, 8),
+	},
+	[BCM_NS2_GENPLL_SW_250_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_250_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 19, 13, 0),
+		.mdiv = REG_VAL(0x18, 8, 8),
+	},
+	[BCM_NS2_GENPLL_SW_NIC_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_NIC_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 20, 14, 0),
+		.mdiv = REG_VAL(0x14, 0, 8),
+	},
+	[BCM_NS2_GENPLL_SW_CHIMP_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_CHIMP_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 21, 15, 0),
+		.mdiv = REG_VAL(0x14, 8, 8),
+	},
+	[BCM_NS2_GENPLL_SW_PORT_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_PORT_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 22, 16, 0),
+		.mdiv = REG_VAL(0x14, 16, 8),
+	},
+	[BCM_NS2_GENPLL_SW_SDIO_CLK] = {
+		.channel = BCM_NS2_GENPLL_SW_SDIO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 23, 17, 0),
+		.mdiv = REG_VAL(0x14, 24, 8),
+	},
+};
+
+static void __init ns2_genpll_sw_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &genpll_sw, NULL, 0, genpll_sw_clk,
+			    ARRAY_SIZE(genpll_sw_clk));
+}
+CLK_OF_DECLARE(ns2_genpll_sw_clk, "brcm,ns2-genpll-sw",
+	       ns2_genpll_sw_clk_init);
+
+static const struct iproc_pll_ctrl lcpll_ddr = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+	.aon = AON_VAL(0x0, 2, 1, 0),
+	.reset = RESET_VAL(0x4, 2, 1),
+	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
+	.ndiv_int = REG_VAL(0x8, 4, 10),
+	.pdiv = REG_VAL(0x8, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+	.status = REG_VAL(0x0, 0, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll_ddr_clk[] = {
+	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+	 * in NS2.  However, it doesn't appear to be used anywhere, so setting
+	 * it to 0.
+	 */
+	[BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK] = {
+		.channel = BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 18, 12, 0),
+		.mdiv = REG_VAL(0x14, 0, 8),
+	},
+	[BCM_NS2_LCPLL_DDR_DDR_CLK] = {
+		.channel = BCM_NS2_LCPLL_DDR_DDR_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 19, 13, 0),
+		.mdiv = REG_VAL(0x14, 8, 8),
+	},
+	[BCM_NS2_LCPLL_DDR_CH2_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_DDR_CH2_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 20, 14, 0),
+		.mdiv = REG_VAL(0x10, 0, 8),
+	},
+	[BCM_NS2_LCPLL_DDR_CH3_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_DDR_CH3_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 21, 15, 0),
+		.mdiv = REG_VAL(0x10, 8, 8),
+	},
+	[BCM_NS2_LCPLL_DDR_CH4_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_DDR_CH4_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 22, 16, 0),
+		.mdiv = REG_VAL(0x10, 16, 8),
+	},
+	[BCM_NS2_LCPLL_DDR_CH5_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_DDR_CH5_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 23, 17, 0),
+		.mdiv = REG_VAL(0x10, 24, 8),
+	},
+};
+
+static void __init ns2_lcpll_ddr_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &lcpll_ddr, NULL, 0, lcpll_ddr_clk,
+			    ARRAY_SIZE(lcpll_ddr_clk));
+}
+CLK_OF_DECLARE(ns2_lcpll_ddr_clk, "brcm,ns2-lcpll-ddr",
+	       ns2_lcpll_ddr_clk_init);
+
+static const struct iproc_pll_ctrl lcpll_ports = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_SPLIT_STAT_CTRL,
+	.aon = AON_VAL(0x0, 2, 5, 4),
+	.reset = RESET_VAL(0x4, 2, 1),
+	.dig_filter = DF_VAL(0x0, 9, 3, 5, 4, 1, 4),
+	.ndiv_int = REG_VAL(0x8, 4, 10),
+	.pdiv = REG_VAL(0x8, 0, 4),
+	.vco_ctrl = VCO_CTRL_VAL(0x10, 0xc),
+	.status = REG_VAL(0x0, 0, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll_ports_clk[] = {
+	/* bypass_shift, the last value passed into ENABLE_VAL(), is not defined
+	 * in NS2.  However, it doesn't appear to be used anywhere, so setting
+	 * it to 0.
+	 */
+	[BCM_NS2_LCPLL_PORTS_WAN_CLK] = {
+		.channel = BCM_NS2_LCPLL_PORTS_WAN_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 18, 12, 0),
+		.mdiv = REG_VAL(0x14, 0, 8),
+	},
+	[BCM_NS2_LCPLL_PORTS_RGMII_CLK] = {
+		.channel = BCM_NS2_LCPLL_PORTS_RGMII_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 19, 13, 0),
+		.mdiv = REG_VAL(0x14, 8, 8),
+	},
+	[BCM_NS2_LCPLL_PORTS_CH2_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_PORTS_CH2_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 20, 14, 0),
+		.mdiv = REG_VAL(0x10, 0, 8),
+	},
+	[BCM_NS2_LCPLL_PORTS_CH3_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_PORTS_CH3_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 21, 15, 0),
+		.mdiv = REG_VAL(0x10, 8, 8),
+	},
+	[BCM_NS2_LCPLL_PORTS_CH4_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_PORTS_CH4_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 22, 16, 0),
+		.mdiv = REG_VAL(0x10, 16, 8),
+	},
+	[BCM_NS2_LCPLL_PORTS_CH5_UNUSED] = {
+		.channel = BCM_NS2_LCPLL_PORTS_CH5_UNUSED,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 23, 17, 0),
+		.mdiv = REG_VAL(0x10, 24, 8),
+	},
+};
+
+static void __init ns2_lcpll_ports_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &lcpll_ports, NULL, 0, lcpll_ports_clk,
+			    ARRAY_SIZE(lcpll_ports_clk));
+}
+CLK_OF_DECLARE(ns2_lcpll_ports_clk, "brcm,ns2-lcpll-ports",
+	       ns2_lcpll_ports_clk_init);
diff --git a/drivers/clk/bcm/clk-nsp.c b/drivers/clk/bcm/clk-nsp.c
new file mode 100644
index 000000000..cf66f640a
--- /dev/null
+++ b/drivers/clk/bcm/clk-nsp.c
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include <dt-bindings/clock/bcm-nsp.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+	.pwr_shift = ps, .iso_shift = is }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+	.p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
+	.ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas,    \
+	.ka_width = kaw }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+	.hold_shift = hs, .bypass_shift = bs }
+
+static void __init nsp_armpll_init(struct device_node *node)
+{
+	iproc_armpll_setup(node);
+}
+CLK_OF_DECLARE(nsp_armpll, "brcm,nsp-armpll", nsp_armpll_init);
+
+static const struct iproc_pll_ctrl genpll = {
+	.flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
+	.aon = AON_VAL(0x0, 1, 12, 0),
+	.reset = RESET_VAL(0x0, 11, 10),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.ndiv_int = REG_VAL(0x14, 20, 10),
+	.ndiv_frac = REG_VAL(0x14, 0, 20),
+	.pdiv = REG_VAL(0x18, 24, 3),
+	.status = REG_VAL(0x20, 12, 1),
+};
+
+static const struct iproc_clk_ctrl genpll_clk[] = {
+	[BCM_NSP_GENPLL_PHY_CLK] = {
+		.channel = BCM_NSP_GENPLL_PHY_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 12, 6, 18),
+		.mdiv = REG_VAL(0x18, 16, 8),
+	},
+	[BCM_NSP_GENPLL_ENET_SW_CLK] = {
+		.channel = BCM_NSP_GENPLL_ENET_SW_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 13, 7, 19),
+		.mdiv = REG_VAL(0x18, 8, 8),
+	},
+	[BCM_NSP_GENPLL_USB_PHY_REF_CLK] = {
+		.channel = BCM_NSP_GENPLL_USB_PHY_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 14, 8, 20),
+		.mdiv = REG_VAL(0x18, 0, 8),
+	},
+	[BCM_NSP_GENPLL_IPROCFAST_CLK] = {
+		.channel = BCM_NSP_GENPLL_IPROCFAST_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 15, 9, 21),
+		.mdiv = REG_VAL(0x1c, 16, 8),
+	},
+	[BCM_NSP_GENPLL_SATA1_CLK] = {
+		.channel = BCM_NSP_GENPLL_SATA1_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 16, 10, 22),
+		.mdiv = REG_VAL(0x1c, 8, 8),
+	},
+	[BCM_NSP_GENPLL_SATA2_CLK] = {
+		.channel = BCM_NSP_GENPLL_SATA2_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 17, 11, 23),
+		.mdiv = REG_VAL(0x1c, 0, 8),
+	},
+};
+
+static void __init nsp_genpll_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
+			    ARRAY_SIZE(genpll_clk));
+}
+CLK_OF_DECLARE(nsp_genpll_clk, "brcm,nsp-genpll", nsp_genpll_clk_init);
+
+static const struct iproc_pll_ctrl lcpll0 = {
+	.flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
+	.aon = AON_VAL(0x0, 1, 24, 0),
+	.reset = RESET_VAL(0x0, 23, 22),
+	.dig_filter = DF_VAL(0x0, 16, 3, 12, 4, 19, 4),
+	.ndiv_int = REG_VAL(0x4, 20, 8),
+	.ndiv_frac = REG_VAL(0x4, 0, 20),
+	.pdiv = REG_VAL(0x4, 28, 3),
+	.status = REG_VAL(0x10, 12, 1),
+};
+
+static const struct iproc_clk_ctrl lcpll0_clk[] = {
+	[BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK] = {
+		.channel = BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 6, 3, 9),
+		.mdiv = REG_VAL(0x8, 24, 8),
+	},
+	[BCM_NSP_LCPLL0_SDIO_CLK] = {
+		.channel = BCM_NSP_LCPLL0_SDIO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 7, 4, 10),
+		.mdiv = REG_VAL(0x8, 16, 8),
+	},
+	[BCM_NSP_LCPLL0_DDR_PHY_CLK] = {
+		.channel = BCM_NSP_LCPLL0_DDR_PHY_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 8, 5, 11),
+		.mdiv = REG_VAL(0x8, 8, 8),
+	},
+};
+
+static void __init nsp_lcpll0_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
+			    ARRAY_SIZE(lcpll0_clk));
+}
+CLK_OF_DECLARE(nsp_lcpll0_clk, "brcm,nsp-lcpll0", nsp_lcpll0_clk_init);
diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c
new file mode 100644
index 000000000..969227e2d
--- /dev/null
+++ b/drivers/clk/bcm/clk-raspberrypi.c
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Raspberry Pi driver for firmware controlled clocks
+ *
+ * Even though clk-bcm2835 provides an interface to the hardware registers for
+ * the system clocks we've had to factor out 'pllb' as the firmware 'owns' it.
+ * We're not allowed to change it directly as we might race with the
+ * over-temperature and under-voltage protections provided by the firmware.
+ *
+ * Copyright (C) 2019 Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+ */
+
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+enum rpi_firmware_clk_id {
+	RPI_FIRMWARE_EMMC_CLK_ID = 1,
+	RPI_FIRMWARE_UART_CLK_ID,
+	RPI_FIRMWARE_ARM_CLK_ID,
+	RPI_FIRMWARE_CORE_CLK_ID,
+	RPI_FIRMWARE_V3D_CLK_ID,
+	RPI_FIRMWARE_H264_CLK_ID,
+	RPI_FIRMWARE_ISP_CLK_ID,
+	RPI_FIRMWARE_SDRAM_CLK_ID,
+	RPI_FIRMWARE_PIXEL_CLK_ID,
+	RPI_FIRMWARE_PWM_CLK_ID,
+	RPI_FIRMWARE_HEVC_CLK_ID,
+	RPI_FIRMWARE_EMMC2_CLK_ID,
+	RPI_FIRMWARE_M2MC_CLK_ID,
+	RPI_FIRMWARE_PIXEL_BVB_CLK_ID,
+	RPI_FIRMWARE_NUM_CLK_ID,
+};
+
+static char *rpi_firmware_clk_names[] = {
+	[RPI_FIRMWARE_EMMC_CLK_ID]	= "emmc",
+	[RPI_FIRMWARE_UART_CLK_ID]	= "uart",
+	[RPI_FIRMWARE_ARM_CLK_ID]	= "arm",
+	[RPI_FIRMWARE_CORE_CLK_ID]	= "core",
+	[RPI_FIRMWARE_V3D_CLK_ID]	= "v3d",
+	[RPI_FIRMWARE_H264_CLK_ID]	= "h264",
+	[RPI_FIRMWARE_ISP_CLK_ID]	= "isp",
+	[RPI_FIRMWARE_SDRAM_CLK_ID]	= "sdram",
+	[RPI_FIRMWARE_PIXEL_CLK_ID]	= "pixel",
+	[RPI_FIRMWARE_PWM_CLK_ID]	= "pwm",
+	[RPI_FIRMWARE_HEVC_CLK_ID]	= "hevc",
+	[RPI_FIRMWARE_EMMC2_CLK_ID]	= "emmc2",
+	[RPI_FIRMWARE_M2MC_CLK_ID]	= "m2mc",
+	[RPI_FIRMWARE_PIXEL_BVB_CLK_ID]	= "pixel-bvb",
+};
+
+#define RPI_FIRMWARE_STATE_ENABLE_BIT	BIT(0)
+#define RPI_FIRMWARE_STATE_WAIT_BIT	BIT(1)
+
+struct raspberrypi_clk {
+	struct device *dev;
+	struct rpi_firmware *firmware;
+	struct platform_device *cpufreq;
+};
+
+struct raspberrypi_clk_data {
+	struct clk_hw hw;
+
+	unsigned int id;
+
+	struct raspberrypi_clk *rpi;
+};
+
+/*
+ * Structure of the message passed to Raspberry Pi's firmware in order to
+ * change clock rates. The 'disable_turbo' option is only available to the ARM
+ * clock (pllb) which we enable by default as turbo mode will alter multiple
+ * clocks at once.
+ *
+ * Even though we're able to access the clock registers directly we're bound to
+ * use the firmware interface as the firmware ultimately takes care of
+ * mitigating overheating/undervoltage situations and we would be changing
+ * frequencies behind his back.
+ *
+ * For more information on the firmware interface check:
+ * https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface
+ */
+struct raspberrypi_firmware_prop {
+	__le32 id;
+	__le32 val;
+	__le32 disable_turbo;
+} __packed;
+
+static int raspberrypi_clock_property(struct rpi_firmware *firmware,
+				      const struct raspberrypi_clk_data *data,
+				      u32 tag, u32 *val)
+{
+	struct raspberrypi_firmware_prop msg = {
+		.id = cpu_to_le32(data->id),
+		.val = cpu_to_le32(*val),
+		.disable_turbo = cpu_to_le32(1),
+	};
+	int ret;
+
+	ret = rpi_firmware_property(firmware, tag, &msg, sizeof(msg));
+	if (ret)
+		return ret;
+
+	*val = le32_to_cpu(msg.val);
+
+	return 0;
+}
+
+static int raspberrypi_fw_is_prepared(struct clk_hw *hw)
+{
+	struct raspberrypi_clk_data *data =
+		container_of(hw, struct raspberrypi_clk_data, hw);
+	struct raspberrypi_clk *rpi = data->rpi;
+	u32 val = 0;
+	int ret;
+
+	ret = raspberrypi_clock_property(rpi->firmware, data,
+					 RPI_FIRMWARE_GET_CLOCK_STATE, &val);
+	if (ret)
+		return 0;
+
+	return !!(val & RPI_FIRMWARE_STATE_ENABLE_BIT);
+}
+
+
+static unsigned long raspberrypi_fw_get_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct raspberrypi_clk_data *data =
+		container_of(hw, struct raspberrypi_clk_data, hw);
+	struct raspberrypi_clk *rpi = data->rpi;
+	u32 val = 0;
+	int ret;
+
+	ret = raspberrypi_clock_property(rpi->firmware, data,
+					 RPI_FIRMWARE_GET_CLOCK_RATE, &val);
+	if (ret)
+		return 0;
+
+	return val;
+}
+
+static int raspberrypi_fw_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct raspberrypi_clk_data *data =
+		container_of(hw, struct raspberrypi_clk_data, hw);
+	struct raspberrypi_clk *rpi = data->rpi;
+	u32 _rate = rate;
+	int ret;
+
+	ret = raspberrypi_clock_property(rpi->firmware, data,
+					 RPI_FIRMWARE_SET_CLOCK_RATE, &_rate);
+	if (ret)
+		dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d\n",
+				    clk_hw_get_name(hw), ret);
+
+	return ret;
+}
+
+static int raspberrypi_fw_dumb_determine_rate(struct clk_hw *hw,
+					      struct clk_rate_request *req)
+{
+	/*
+	 * The firmware will do the rounding but that isn't part of
+	 * the interface with the firmware, so we just do our best
+	 * here.
+	 */
+	req->rate = clamp(req->rate, req->min_rate, req->max_rate);
+	return 0;
+}
+
+static const struct clk_ops raspberrypi_firmware_clk_ops = {
+	.is_prepared	= raspberrypi_fw_is_prepared,
+	.recalc_rate	= raspberrypi_fw_get_rate,
+	.determine_rate	= raspberrypi_fw_dumb_determine_rate,
+	.set_rate	= raspberrypi_fw_set_rate,
+};
+
+static struct clk_hw *raspberrypi_clk_register(struct raspberrypi_clk *rpi,
+					       unsigned int parent,
+					       unsigned int id)
+{
+	struct raspberrypi_clk_data *data;
+	struct clk_init_data init = {};
+	u32 min_rate, max_rate;
+	int ret;
+
+	data = devm_kzalloc(rpi->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return ERR_PTR(-ENOMEM);
+	data->rpi = rpi;
+	data->id = id;
+
+	init.name = devm_kasprintf(rpi->dev, GFP_KERNEL,
+				   "fw-clk-%s",
+				   rpi_firmware_clk_names[id]);
+	init.ops = &raspberrypi_firmware_clk_ops;
+	init.flags = CLK_GET_RATE_NOCACHE;
+
+	data->hw.init = &init;
+
+	ret = raspberrypi_clock_property(rpi->firmware, data,
+					 RPI_FIRMWARE_GET_MIN_CLOCK_RATE,
+					 &min_rate);
+	if (ret) {
+		dev_err(rpi->dev, "Failed to get clock %d min freq: %d\n",
+			id, ret);
+		return ERR_PTR(ret);
+	}
+
+	ret = raspberrypi_clock_property(rpi->firmware, data,
+					 RPI_FIRMWARE_GET_MAX_CLOCK_RATE,
+					 &max_rate);
+	if (ret) {
+		dev_err(rpi->dev, "Failed to get clock %d max freq: %d\n",
+			id, ret);
+		return ERR_PTR(ret);
+	}
+
+	ret = devm_clk_hw_register(rpi->dev, &data->hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	clk_hw_set_rate_range(&data->hw, min_rate, max_rate);
+
+	if (id == RPI_FIRMWARE_ARM_CLK_ID) {
+		ret = devm_clk_hw_register_clkdev(rpi->dev, &data->hw,
+						  NULL, "cpu0");
+		if (ret) {
+			dev_err(rpi->dev, "Failed to initialize clkdev\n");
+			return ERR_PTR(ret);
+		}
+	}
+
+	return &data->hw;
+}
+
+struct rpi_firmware_get_clocks_response {
+	u32 parent;
+	u32 id;
+};
+
+static int raspberrypi_discover_clocks(struct raspberrypi_clk *rpi,
+				       struct clk_hw_onecell_data *data)
+{
+	struct rpi_firmware_get_clocks_response *clks;
+	int ret;
+
+	/*
+	 * The firmware doesn't guarantee that the last element of
+	 * RPI_FIRMWARE_GET_CLOCKS is zeroed. So allocate an additional
+	 * zero element as sentinel.
+	 */
+	clks = devm_kcalloc(rpi->dev,
+			    RPI_FIRMWARE_NUM_CLK_ID + 1, sizeof(*clks),
+			    GFP_KERNEL);
+	if (!clks)
+		return -ENOMEM;
+
+	ret = rpi_firmware_property(rpi->firmware, RPI_FIRMWARE_GET_CLOCKS,
+				    clks,
+				    sizeof(*clks) * RPI_FIRMWARE_NUM_CLK_ID);
+	if (ret)
+		return ret;
+
+	while (clks->id) {
+		struct clk_hw *hw;
+
+		switch (clks->id) {
+		case RPI_FIRMWARE_ARM_CLK_ID:
+		case RPI_FIRMWARE_CORE_CLK_ID:
+		case RPI_FIRMWARE_M2MC_CLK_ID:
+		case RPI_FIRMWARE_V3D_CLK_ID:
+		case RPI_FIRMWARE_PIXEL_BVB_CLK_ID:
+			hw = raspberrypi_clk_register(rpi, clks->parent,
+						      clks->id);
+			if (IS_ERR(hw))
+				return PTR_ERR(hw);
+
+			data->hws[clks->id] = hw;
+			data->num = clks->id + 1;
+			fallthrough;
+
+		default:
+			clks++;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int raspberrypi_clk_probe(struct platform_device *pdev)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct device_node *firmware_node;
+	struct device *dev = &pdev->dev;
+	struct rpi_firmware *firmware;
+	struct raspberrypi_clk *rpi;
+	int ret;
+
+	/*
+	 * We can be probed either through the an old-fashioned
+	 * platform device registration or through a DT node that is a
+	 * child of the firmware node. Handle both cases.
+	 */
+	if (dev->of_node)
+		firmware_node = of_get_parent(dev->of_node);
+	else
+		firmware_node = of_find_compatible_node(NULL, NULL,
+							"raspberrypi,bcm2835-firmware");
+	if (!firmware_node) {
+		dev_err(dev, "Missing firmware node\n");
+		return -ENOENT;
+	}
+
+	firmware = rpi_firmware_get(firmware_node);
+	of_node_put(firmware_node);
+	if (!firmware)
+		return -EPROBE_DEFER;
+
+	rpi = devm_kzalloc(dev, sizeof(*rpi), GFP_KERNEL);
+	if (!rpi)
+		return -ENOMEM;
+
+	rpi->dev = dev;
+	rpi->firmware = firmware;
+	platform_set_drvdata(pdev, rpi);
+
+	clk_data = devm_kzalloc(dev, struct_size(clk_data, hws,
+						 RPI_FIRMWARE_NUM_CLK_ID),
+				GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	ret = raspberrypi_discover_clocks(rpi, clk_data);
+	if (ret)
+		return ret;
+
+	ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					  clk_data);
+	if (ret)
+		return ret;
+
+	rpi->cpufreq = platform_device_register_data(dev, "raspberrypi-cpufreq",
+						     -1, NULL, 0);
+
+	return 0;
+}
+
+static int raspberrypi_clk_remove(struct platform_device *pdev)
+{
+	struct raspberrypi_clk *rpi = platform_get_drvdata(pdev);
+
+	platform_device_unregister(rpi->cpufreq);
+
+	return 0;
+}
+
+static const struct of_device_id raspberrypi_clk_match[] = {
+	{ .compatible = "raspberrypi,firmware-clocks" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, raspberrypi_clk_match);
+
+static struct platform_driver raspberrypi_clk_driver = {
+	.driver = {
+		.name = "raspberrypi-clk",
+		.of_match_table = raspberrypi_clk_match,
+	},
+	.probe          = raspberrypi_clk_probe,
+	.remove		= raspberrypi_clk_remove,
+};
+module_platform_driver(raspberrypi_clk_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nsaenzjulienne@suse.de>");
+MODULE_DESCRIPTION("Raspberry Pi firmware clock driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:raspberrypi-clk");
diff --git a/drivers/clk/bcm/clk-sr.c b/drivers/clk/bcm/clk-sr.c
new file mode 100644
index 000000000..5db021685
--- /dev/null
+++ b/drivers/clk/bcm/clk-sr.c
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2017 Broadcom
+ */
+
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/clock/bcm-sr.h>
+#include "clk-iproc.h"
+
+#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+	.pwr_shift = ps, .iso_shift = is }
+
+#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
+
+#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
+	.p_reset_shift = prs }
+
+#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+	.ki_shift = kis, .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, \
+	.ka_shift = kas, .ka_width = kaw }
+
+#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+	.hold_shift = hs, .bypass_shift = bs }
+
+
+static const struct iproc_pll_ctrl sr_genpll0 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 5, 1, 0),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll0_clk[] = {
+	[BCM_SR_GENPLL0_125M_CLK] = {
+		.channel = BCM_SR_GENPLL0_125M_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL0_SCR_CLK] = {
+		.channel = BCM_SR_GENPLL0_SCR_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL0_250M_CLK] = {
+		.channel = BCM_SR_GENPLL0_250M_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+	[BCM_SR_GENPLL0_PCIE_AXI_CLK] = {
+		.channel = BCM_SR_GENPLL0_PCIE_AXI_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x1c, 0, 9),
+	},
+	[BCM_SR_GENPLL0_PAXC_AXI_X2_CLK] = {
+		.channel = BCM_SR_GENPLL0_PAXC_AXI_X2_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x1c, 10, 9),
+	},
+	[BCM_SR_GENPLL0_PAXC_AXI_CLK] = {
+		.channel = BCM_SR_GENPLL0_PAXC_AXI_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 11, 5, 17),
+		.mdiv = REG_VAL(0x1c, 20, 9),
+	},
+};
+
+static int sr_genpll0_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_genpll0, NULL, 0, sr_genpll0_clk,
+			    ARRAY_SIZE(sr_genpll0_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll2 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 1, 13, 12),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll2_clk[] = {
+	[BCM_SR_GENPLL2_NIC_CLK] = {
+		.channel = BCM_SR_GENPLL2_NIC_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL2_TS_500_CLK] = {
+		.channel = BCM_SR_GENPLL2_TS_500_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL2_125_NITRO_CLK] = {
+		.channel = BCM_SR_GENPLL2_125_NITRO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+	[BCM_SR_GENPLL2_CHIMP_CLK] = {
+		.channel = BCM_SR_GENPLL2_CHIMP_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x1c, 0, 9),
+	},
+	[BCM_SR_GENPLL2_NIC_FLASH_CLK] = {
+		.channel = BCM_SR_GENPLL2_NIC_FLASH_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x1c, 10, 9),
+	},
+	[BCM_SR_GENPLL2_FS4_CLK] = {
+		.channel = BCM_SR_GENPLL2_FS4_CLK,
+		.enable = ENABLE_VAL(0x4, 11, 5, 17),
+		.mdiv = REG_VAL(0x1c, 20, 9),
+	},
+};
+
+static int sr_genpll2_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_genpll2, NULL, 0, sr_genpll2_clk,
+			    ARRAY_SIZE(sr_genpll2_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll3 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 1, 19, 18),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll3_clk[] = {
+	[BCM_SR_GENPLL3_HSLS_CLK] = {
+		.channel = BCM_SR_GENPLL3_HSLS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL3_SDIO_CLK] = {
+		.channel = BCM_SR_GENPLL3_SDIO_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+};
+
+static void sr_genpll3_clk_init(struct device_node *node)
+{
+	iproc_pll_clk_setup(node, &sr_genpll3, NULL, 0, sr_genpll3_clk,
+			    ARRAY_SIZE(sr_genpll3_clk));
+}
+CLK_OF_DECLARE(sr_genpll3_clk, "brcm,sr-genpll3", sr_genpll3_clk_init);
+
+static const struct iproc_pll_ctrl sr_genpll4 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 1, 25, 24),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll4_clk[] = {
+	[BCM_SR_GENPLL4_CCN_CLK] = {
+		.channel = BCM_SR_GENPLL4_CCN_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL4_TPIU_PLL_CLK] = {
+		.channel = BCM_SR_GENPLL4_TPIU_PLL_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 7, 1, 13),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL4_NOC_CLK] = {
+		.channel = BCM_SR_GENPLL4_NOC_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+	[BCM_SR_GENPLL4_CHCLK_FS4_CLK] = {
+		.channel = BCM_SR_GENPLL4_CHCLK_FS4_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 9, 3, 15),
+		.mdiv = REG_VAL(0x1c, 0, 9),
+	},
+	[BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK] = {
+		.channel = BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x4, 10, 4, 16),
+		.mdiv = REG_VAL(0x1c, 10, 9),
+	},
+};
+
+static int sr_genpll4_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_genpll4, NULL, 0, sr_genpll4_clk,
+			    ARRAY_SIZE(sr_genpll4_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_genpll5 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+		IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 1, 1, 0),
+	.reset = RESET_VAL(0x0, 12, 11),
+	.dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+	.sw_ctrl = SW_CTRL_VAL(0x10, 31),
+	.ndiv_int = REG_VAL(0x10, 20, 10),
+	.ndiv_frac = REG_VAL(0x10, 0, 20),
+	.pdiv = REG_VAL(0x14, 0, 4),
+	.status = REG_VAL(0x30, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_genpll5_clk[] = {
+	[BCM_SR_GENPLL5_FS4_HF_CLK] = {
+		.channel = BCM_SR_GENPLL5_FS4_HF_CLK,
+		.enable = ENABLE_VAL(0x4, 6, 0, 12),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+	[BCM_SR_GENPLL5_CRYPTO_AE_CLK] = {
+		.channel = BCM_SR_GENPLL5_CRYPTO_AE_CLK,
+		.enable = ENABLE_VAL(0x4, 7, 1, 12),
+		.mdiv = REG_VAL(0x18, 10, 9),
+	},
+	[BCM_SR_GENPLL5_RAID_AE_CLK] = {
+		.channel = BCM_SR_GENPLL5_RAID_AE_CLK,
+		.enable = ENABLE_VAL(0x4, 8, 2, 14),
+		.mdiv = REG_VAL(0x18, 20, 9),
+	},
+};
+
+static int sr_genpll5_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_genpll5, NULL, 0, sr_genpll5_clk,
+			    ARRAY_SIZE(sr_genpll5_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll0 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 2, 19, 18),
+	.reset = RESET_VAL(0x0, 31, 30),
+	.sw_ctrl = SW_CTRL_VAL(0x4, 31),
+	.ndiv_int = REG_VAL(0x4, 16, 10),
+	.pdiv = REG_VAL(0x4, 26, 4),
+	.status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll0_clk[] = {
+	[BCM_SR_LCPLL0_SATA_REFP_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_REFP_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 7, 1, 13),
+		.mdiv = REG_VAL(0x14, 0, 9),
+	},
+	[BCM_SR_LCPLL0_SATA_REFN_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_REFN_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 8, 2, 14),
+		.mdiv = REG_VAL(0x14, 10, 9),
+	},
+	[BCM_SR_LCPLL0_SATA_350_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_350_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 9, 3, 15),
+		.mdiv = REG_VAL(0x14, 20, 9),
+	},
+	[BCM_SR_LCPLL0_SATA_500_CLK] = {
+		.channel = BCM_SR_LCPLL0_SATA_500_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 10, 4, 16),
+		.mdiv = REG_VAL(0x18, 0, 9),
+	},
+};
+
+static int sr_lcpll0_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_lcpll0, NULL, 0, sr_lcpll0_clk,
+			    ARRAY_SIZE(sr_lcpll0_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll1 = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 2, 22, 21),
+	.reset = RESET_VAL(0x0, 31, 30),
+	.sw_ctrl = SW_CTRL_VAL(0x4, 31),
+	.ndiv_int = REG_VAL(0x4, 16, 10),
+	.pdiv = REG_VAL(0x4, 26, 4),
+	.status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll1_clk[] = {
+	[BCM_SR_LCPLL1_WAN_CLK] = {
+		.channel = BCM_SR_LCPLL1_WAN_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 7, 1, 13),
+		.mdiv = REG_VAL(0x14, 0, 9),
+	},
+	[BCM_SR_LCPLL1_USB_REF_CLK] = {
+		.channel = BCM_SR_LCPLL1_USB_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 8, 2, 14),
+		.mdiv = REG_VAL(0x14, 10, 9),
+	},
+	[BCM_SR_LCPLL1_CRMU_TS_CLK] = {
+		.channel = BCM_SR_LCPLL1_CRMU_TS_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 9, 3, 15),
+		.mdiv = REG_VAL(0x14, 20, 9),
+	},
+};
+
+static int sr_lcpll1_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_lcpll1, NULL, 0, sr_lcpll1_clk,
+			    ARRAY_SIZE(sr_lcpll1_clk));
+	return 0;
+}
+
+static const struct iproc_pll_ctrl sr_lcpll_pcie = {
+	.flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+	.aon = AON_VAL(0x0, 2, 25, 24),
+	.reset = RESET_VAL(0x0, 31, 30),
+	.sw_ctrl = SW_CTRL_VAL(0x4, 31),
+	.ndiv_int = REG_VAL(0x4, 16, 10),
+	.pdiv = REG_VAL(0x4, 26, 4),
+	.status = REG_VAL(0x38, 12, 1),
+};
+
+static const struct iproc_clk_ctrl sr_lcpll_pcie_clk[] = {
+	[BCM_SR_LCPLL_PCIE_PHY_REF_CLK] = {
+		.channel = BCM_SR_LCPLL_PCIE_PHY_REF_CLK,
+		.flags = IPROC_CLK_AON,
+		.enable = ENABLE_VAL(0x0, 7, 1, 13),
+		.mdiv = REG_VAL(0x14, 0, 9),
+	},
+};
+
+static int sr_lcpll_pcie_clk_init(struct platform_device *pdev)
+{
+	iproc_pll_clk_setup(pdev->dev.of_node,
+			    &sr_lcpll_pcie, NULL, 0, sr_lcpll_pcie_clk,
+			    ARRAY_SIZE(sr_lcpll_pcie_clk));
+	return 0;
+}
+
+static const struct of_device_id sr_clk_dt_ids[] = {
+	{ .compatible = "brcm,sr-genpll0", .data = sr_genpll0_clk_init },
+	{ .compatible = "brcm,sr-genpll2", .data = sr_genpll2_clk_init },
+	{ .compatible = "brcm,sr-genpll4", .data = sr_genpll4_clk_init },
+	{ .compatible = "brcm,sr-genpll5", .data = sr_genpll5_clk_init },
+	{ .compatible = "brcm,sr-lcpll0", .data = sr_lcpll0_clk_init },
+	{ .compatible = "brcm,sr-lcpll1", .data = sr_lcpll1_clk_init },
+	{ .compatible = "brcm,sr-lcpll-pcie", .data = sr_lcpll_pcie_clk_init },
+	{ /* sentinel */ }
+};
+
+static int sr_clk_probe(struct platform_device *pdev)
+{
+	int (*probe_func)(struct platform_device *);
+
+	probe_func = of_device_get_match_data(&pdev->dev);
+	if (!probe_func)
+		return -ENODEV;
+
+	return probe_func(pdev);
+}
+
+static struct platform_driver sr_clk_driver = {
+	.driver = {
+		.name = "sr-clk",
+		.of_match_table = sr_clk_dt_ids,
+	},
+	.probe = sr_clk_probe,
+};
+builtin_platform_driver(sr_clk_driver);