Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 344 insertions, 0 deletions

diff --git a/drivers/clk/keystone/pll.c b/drivers/clk/keystone/pll.c
new file mode 100644
index 000000000..6bbdd4705
--- /dev/null
+++ b/drivers/clk/keystone/pll.c
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PLL clock driver for Keystone devices
+ *
+ * Copyright (C) 2013 Texas Instruments Inc.
+ *	Murali Karicheri <m-karicheri2@ti.com>
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ */
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/module.h>
+
+#define PLLM_LOW_MASK		0x3f
+#define PLLM_HIGH_MASK		0x7ffc0
+#define MAIN_PLLM_HIGH_MASK	0x7f000
+#define PLLM_HIGH_SHIFT		6
+#define PLLD_MASK		0x3f
+#define CLKOD_MASK		0x780000
+#define CLKOD_SHIFT		19
+
+/**
+ * struct clk_pll_data - pll data structure
+ * @has_pllctrl: If set to non zero, lower 6 bits of multiplier is in pllm
+ *	register of pll controller, else it is in the pll_ctrl0((bit 11-6)
+ * @phy_pllm: Physical address of PLLM in pll controller. Used when
+ *	has_pllctrl is non zero.
+ * @phy_pll_ctl0: Physical address of PLL ctrl0. This could be that of
+ *	Main PLL or any other PLLs in the device such as ARM PLL, DDR PLL
+ *	or PA PLL available on keystone2. These PLLs are controlled by
+ *	this register. Main PLL is controlled by a PLL controller.
+ * @pllm: PLL register map address for multiplier bits
+ * @pllod: PLL register map address for post divider bits
+ * @pll_ctl0: PLL controller map address
+ * @pllm_lower_mask: multiplier lower mask
+ * @pllm_upper_mask: multiplier upper mask
+ * @pllm_upper_shift: multiplier upper shift
+ * @plld_mask: divider mask
+ * @clkod_mask: output divider mask
+ * @clkod_shift: output divider shift
+ * @plld_mask: divider mask
+ * @postdiv: Fixed post divider
+ */
+struct clk_pll_data {
+	bool has_pllctrl;
+	u32 phy_pllm;
+	u32 phy_pll_ctl0;
+	void __iomem *pllm;
+	void __iomem *pllod;
+	void __iomem *pll_ctl0;
+	u32 pllm_lower_mask;
+	u32 pllm_upper_mask;
+	u32 pllm_upper_shift;
+	u32 plld_mask;
+	u32 clkod_mask;
+	u32 clkod_shift;
+	u32 postdiv;
+};
+
+/**
+ * struct clk_pll - Main pll clock
+ * @hw: clk_hw for the pll
+ * @pll_data: PLL driver specific data
+ */
+struct clk_pll {
+	struct clk_hw hw;
+	struct clk_pll_data *pll_data;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+static unsigned long clk_pllclk_recalc(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	struct clk_pll_data *pll_data = pll->pll_data;
+	unsigned long rate = parent_rate;
+	u32  mult = 0, prediv, postdiv, val;
+
+	/*
+	 * get bits 0-5 of multiplier from pllctrl PLLM register
+	 * if has_pllctrl is non zero
+	 */
+	if (pll_data->has_pllctrl) {
+		val = readl(pll_data->pllm);
+		mult = (val & pll_data->pllm_lower_mask);
+	}
+
+	/* bit6-12 of PLLM is in Main PLL control register */
+	val = readl(pll_data->pll_ctl0);
+	mult |= ((val & pll_data->pllm_upper_mask)
+			>> pll_data->pllm_upper_shift);
+	prediv = (val & pll_data->plld_mask);
+
+	if (!pll_data->has_pllctrl)
+		/* read post divider from od bits*/
+		postdiv = ((val & pll_data->clkod_mask) >>
+				 pll_data->clkod_shift) + 1;
+	else if (pll_data->pllod) {
+		postdiv = readl(pll_data->pllod);
+		postdiv = ((postdiv & pll_data->clkod_mask) >>
+				pll_data->clkod_shift) + 1;
+	} else
+		postdiv = pll_data->postdiv;
+
+	rate /= (prediv + 1);
+	rate = (rate * (mult + 1));
+	rate /= postdiv;
+
+	return rate;
+}
+
+static const struct clk_ops clk_pll_ops = {
+	.recalc_rate = clk_pllclk_recalc,
+};
+
+static struct clk *clk_register_pll(struct device *dev,
+			const char *name,
+			const char *parent_name,
+			struct clk_pll_data *pll_data)
+{
+	struct clk_init_data init;
+	struct clk_pll *pll;
+	struct clk *clk;
+
+	pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_pll_ops;
+	init.flags = 0;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	pll->pll_data	= pll_data;
+	pll->hw.init = &init;
+
+	clk = clk_register(NULL, &pll->hw);
+	if (IS_ERR(clk))
+		goto out;
+
+	return clk;
+out:
+	kfree(pll);
+	return NULL;
+}
+
+/**
+ * _of_pll_clk_init - PLL initialisation via DT
+ * @node: device tree node for this clock
+ * @pllctrl: If true, lower 6 bits of multiplier is in pllm register of
+ *		pll controller, else it is in the control register0(bit 11-6)
+ */
+static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl)
+{
+	struct clk_pll_data *pll_data;
+	const char *parent_name;
+	struct clk *clk;
+	int i;
+
+	pll_data = kzalloc(sizeof(*pll_data), GFP_KERNEL);
+	if (!pll_data) {
+		pr_err("%s: Out of memory\n", __func__);
+		return;
+	}
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (of_property_read_u32(node, "fixed-postdiv",	&pll_data->postdiv)) {
+		/* assume the PLL has output divider register bits */
+		pll_data->clkod_mask = CLKOD_MASK;
+		pll_data->clkod_shift = CLKOD_SHIFT;
+
+		/*
+		 * Check if there is an post-divider register. If not
+		 * assume od bits are part of control register.
+		 */
+		i = of_property_match_string(node, "reg-names",
+					     "post-divider");
+		pll_data->pllod = of_iomap(node, i);
+	}
+
+	i = of_property_match_string(node, "reg-names", "control");
+	pll_data->pll_ctl0 = of_iomap(node, i);
+	if (!pll_data->pll_ctl0) {
+		pr_err("%s: ioremap failed\n", __func__);
+		iounmap(pll_data->pllod);
+		goto out;
+	}
+
+	pll_data->pllm_lower_mask = PLLM_LOW_MASK;
+	pll_data->pllm_upper_shift = PLLM_HIGH_SHIFT;
+	pll_data->plld_mask = PLLD_MASK;
+	pll_data->has_pllctrl = pllctrl;
+	if (!pll_data->has_pllctrl) {
+		pll_data->pllm_upper_mask = PLLM_HIGH_MASK;
+	} else {
+		pll_data->pllm_upper_mask = MAIN_PLLM_HIGH_MASK;
+		i = of_property_match_string(node, "reg-names", "multiplier");
+		pll_data->pllm = of_iomap(node, i);
+		if (!pll_data->pllm) {
+			iounmap(pll_data->pll_ctl0);
+			iounmap(pll_data->pllod);
+			goto out;
+		}
+	}
+
+	clk = clk_register_pll(NULL, node->name, parent_name, pll_data);
+	if (!IS_ERR_OR_NULL(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		return;
+	}
+
+out:
+	pr_err("%s: error initializing pll %pOFn\n", __func__, node);
+	kfree(pll_data);
+}
+
+/**
+ * of_keystone_pll_clk_init - PLL initialisation DT wrapper
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_pll_clk_init(struct device_node *node)
+{
+	_of_pll_clk_init(node, false);
+}
+CLK_OF_DECLARE(keystone_pll_clock, "ti,keystone,pll-clock",
+					of_keystone_pll_clk_init);
+
+/**
+ * of_keystone_main_pll_clk_init - Main PLL initialisation DT wrapper
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_main_pll_clk_init(struct device_node *node)
+{
+	_of_pll_clk_init(node, true);
+}
+CLK_OF_DECLARE(keystone_main_pll_clock, "ti,keystone,main-pll-clock",
+						of_keystone_main_pll_clk_init);
+
+/**
+ * of_pll_div_clk_init - PLL divider setup function
+ * @node: device tree node for this clock
+ */
+static void __init of_pll_div_clk_init(struct device_node *node)
+{
+	const char *parent_name;
+	void __iomem *reg;
+	u32 shift, mask;
+	struct clk *clk;
+	const char *clk_name = node->name;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		pr_err("%s: ioremap failed\n", __func__);
+		return;
+	}
+
+	parent_name = of_clk_get_parent_name(node, 0);
+	if (!parent_name) {
+		pr_err("%s: missing parent clock\n", __func__);
+		iounmap(reg);
+		return;
+	}
+
+	if (of_property_read_u32(node, "bit-shift", &shift)) {
+		pr_err("%s: missing 'shift' property\n", __func__);
+		iounmap(reg);
+		return;
+	}
+
+	if (of_property_read_u32(node, "bit-mask", &mask)) {
+		pr_err("%s: missing 'bit-mask' property\n", __func__);
+		iounmap(reg);
+		return;
+	}
+
+	clk = clk_register_divider(NULL, clk_name, parent_name, 0, reg, shift,
+				 mask, 0, NULL);
+	if (IS_ERR(clk)) {
+		pr_err("%s: error registering divider %s\n", __func__, clk_name);
+		iounmap(reg);
+		return;
+	}
+
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(pll_divider_clock, "ti,keystone,pll-divider-clock", of_pll_div_clk_init);
+
+/**
+ * of_pll_mux_clk_init - PLL mux setup function
+ * @node: device tree node for this clock
+ */
+static void __init of_pll_mux_clk_init(struct device_node *node)
+{
+	void __iomem *reg;
+	u32 shift, mask;
+	struct clk *clk;
+	const char *parents[2];
+	const char *clk_name = node->name;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+	reg = of_iomap(node, 0);
+	if (!reg) {
+		pr_err("%s: ioremap failed\n", __func__);
+		return;
+	}
+
+	of_clk_parent_fill(node, parents, 2);
+	if (!parents[0] || !parents[1]) {
+		pr_err("%s: missing parent clocks\n", __func__);
+		return;
+	}
+
+	if (of_property_read_u32(node, "bit-shift", &shift)) {
+		pr_err("%s: missing 'shift' property\n", __func__);
+		return;
+	}
+
+	if (of_property_read_u32(node, "bit-mask", &mask)) {
+		pr_err("%s: missing 'bit-mask' property\n", __func__);
+		return;
+	}
+
+	clk = clk_register_mux(NULL, clk_name, (const char **)&parents,
+				ARRAY_SIZE(parents) , 0, reg, shift, mask,
+				0, NULL);
+	if (IS_ERR(clk)) {
+		pr_err("%s: error registering mux %s\n", __func__, clk_name);
+		return;
+	}
+
+	of_clk_add_provider(node, of_clk_src_simple_get, clk);
+}
+CLK_OF_DECLARE(pll_mux_clock, "ti,keystone,pll-mux-clock", of_pll_mux_clk_init);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PLL clock driver for Keystone devices");
+MODULE_AUTHOR("Murali Karicheri <m-karicheri2@ti.com>");
+MODULE_AUTHOR("Santosh Shilimkar <santosh.shilimkar@ti.com>");