Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 302 insertions, 0 deletions

diff --git a/drivers/crypto/cavium/nitrox/nitrox_dev.h b/drivers/crypto/cavium/nitrox/nitrox_dev.h
new file mode 100644
index 000000000..c2d0c23fb
--- /dev/null
+++ b/drivers/crypto/cavium/nitrox/nitrox_dev.h
@@ -0,0 +1,302 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __NITROX_DEV_H
+#define __NITROX_DEV_H
+
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/if.h>
+
+#define VERSION_LEN 32
+/* Maximum queues in PF mode */
+#define MAX_PF_QUEUES	64
+/* Maximum device queues */
+#define MAX_DEV_QUEUES (MAX_PF_QUEUES)
+/* Maximum UCD Blocks */
+#define CNN55XX_MAX_UCD_BLOCKS	8
+
+/**
+ * struct nitrox_cmdq - NITROX command queue
+ * @cmd_qlock: command queue lock
+ * @resp_qlock: response queue lock
+ * @backlog_qlock: backlog queue lock
+ * @ndev: NITROX device
+ * @response_head: submitted request list
+ * @backlog_head: backlog queue
+ * @dbell_csr_addr: doorbell register address for this queue
+ * @compl_cnt_csr_addr: completion count register address of the slc port
+ * @base: command queue base address
+ * @dma: dma address of the base
+ * @pending_count: request pending at device
+ * @backlog_count: backlog request count
+ * @write_idx: next write index for the command
+ * @instr_size: command size
+ * @qno: command queue number
+ * @qsize: command queue size
+ * @unalign_base: unaligned base address
+ * @unalign_dma: unaligned dma address
+ */
+struct nitrox_cmdq {
+	spinlock_t cmd_qlock;
+	spinlock_t resp_qlock;
+	spinlock_t backlog_qlock;
+
+	struct nitrox_device *ndev;
+	struct list_head response_head;
+	struct list_head backlog_head;
+
+	u8 __iomem *dbell_csr_addr;
+	u8 __iomem *compl_cnt_csr_addr;
+	u8 *base;
+	dma_addr_t dma;
+
+	struct work_struct backlog_qflush;
+
+	atomic_t pending_count;
+	atomic_t backlog_count;
+
+	int write_idx;
+	u8 instr_size;
+	u8 qno;
+	u32 qsize;
+
+	u8 *unalign_base;
+	dma_addr_t unalign_dma;
+};
+
+/**
+ * struct nitrox_hw - NITROX hardware information
+ * @partname: partname ex: CNN55xxx-xxx
+ * @fw_name: firmware version
+ * @freq: NITROX frequency
+ * @vendor_id: vendor ID
+ * @device_id: device ID
+ * @revision_id: revision ID
+ * @se_cores: number of symmetric cores
+ * @ae_cores: number of asymmetric cores
+ * @zip_cores: number of zip cores
+ */
+struct nitrox_hw {
+	char partname[IFNAMSIZ * 2];
+	char fw_name[CNN55XX_MAX_UCD_BLOCKS][VERSION_LEN];
+
+	int freq;
+	u16 vendor_id;
+	u16 device_id;
+	u8 revision_id;
+
+	u8 se_cores;
+	u8 ae_cores;
+	u8 zip_cores;
+};
+
+struct nitrox_stats {
+	atomic64_t posted;
+	atomic64_t completed;
+	atomic64_t dropped;
+};
+
+#define IRQ_NAMESZ	32
+
+struct nitrox_q_vector {
+	char name[IRQ_NAMESZ];
+	bool valid;
+	int ring;
+	struct tasklet_struct resp_tasklet;
+	union {
+		struct nitrox_cmdq *cmdq;
+		struct nitrox_device *ndev;
+	};
+};
+
+enum mcode_type {
+	MCODE_TYPE_INVALID,
+	MCODE_TYPE_AE,
+	MCODE_TYPE_SE_SSL,
+	MCODE_TYPE_SE_IPSEC,
+};
+
+/**
+ * mbox_msg - Mailbox message data
+ * @type: message type
+ * @opcode: message opcode
+ * @data: message data
+ */
+union mbox_msg {
+	u64 value;
+	struct {
+		u64 type: 2;
+		u64 opcode: 6;
+		u64 data: 58;
+	};
+	struct {
+		u64 type: 2;
+		u64 opcode: 6;
+		u64 chipid: 8;
+		u64 vfid: 8;
+	} id;
+	struct {
+		u64 type: 2;
+		u64 opcode: 6;
+		u64 count: 4;
+		u64 info: 40;
+		u64 next_se_grp: 3;
+		u64 next_ae_grp: 3;
+	} mcode_info;
+};
+
+/**
+ * nitrox_vfdev - NITROX VF device instance in PF
+ * @state: VF device state
+ * @vfno: VF number
+ * @nr_queues: number of queues enabled in VF
+ * @ring: ring to communicate with VF
+ * @msg: Mailbox message data from VF
+ * @mbx_resp: Mailbox counters
+ */
+struct nitrox_vfdev {
+	atomic_t state;
+	int vfno;
+	int nr_queues;
+	int ring;
+	union mbox_msg msg;
+	atomic64_t mbx_resp;
+};
+
+/**
+ * struct nitrox_iov - SR-IOV information
+ * @num_vfs: number of VF(s) enabled
+ * @max_vf_queues: Maximum number of queues allowed for VF
+ * @vfdev: VF(s) devices
+ * @pf2vf_wq: workqueue for PF2VF communication
+ * @msix: MSI-X entry for PF in SR-IOV case
+ */
+struct nitrox_iov {
+	int num_vfs;
+	int max_vf_queues;
+	struct nitrox_vfdev *vfdev;
+	struct workqueue_struct *pf2vf_wq;
+	struct msix_entry msix;
+};
+
+/*
+ * NITROX Device states
+ */
+enum ndev_state {
+	__NDEV_NOT_READY,
+	__NDEV_READY,
+	__NDEV_IN_RESET,
+};
+
+/* NITROX support modes for VF(s) */
+enum vf_mode {
+	__NDEV_MODE_PF,
+	__NDEV_MODE_VF16,
+	__NDEV_MODE_VF32,
+	__NDEV_MODE_VF64,
+	__NDEV_MODE_VF128,
+};
+
+#define __NDEV_SRIOV_BIT 0
+
+/* command queue size */
+#define DEFAULT_CMD_QLEN 2048
+/* command timeout in milliseconds */
+#define CMD_TIMEOUT 2000
+
+#define DEV(ndev) ((struct device *)(&(ndev)->pdev->dev))
+
+#define NITROX_CSR_ADDR(ndev, offset) \
+	((ndev)->bar_addr + (offset))
+
+/**
+ * struct nitrox_device - NITROX Device Information.
+ * @list: pointer to linked list of devices
+ * @bar_addr: iomap address
+ * @pdev: PCI device information
+ * @state: NITROX device state
+ * @flags: flags to indicate device the features
+ * @timeout: Request timeout in jiffies
+ * @refcnt: Device usage count
+ * @idx: device index (0..N)
+ * @node: NUMA node id attached
+ * @qlen: Command queue length
+ * @nr_queues: Number of command queues
+ * @mode: Device mode PF/VF
+ * @ctx_pool: DMA pool for crypto context
+ * @pkt_inq: Packet input rings
+ * @aqmq: AQM command queues
+ * @qvec: MSI-X queue vectors information
+ * @iov: SR-IOV informatin
+ * @num_vecs: number of MSI-X vectors
+ * @stats: request statistics
+ * @hw: hardware information
+ * @debugfs_dir: debugfs directory
+ */
+struct nitrox_device {
+	struct list_head list;
+
+	u8 __iomem *bar_addr;
+	struct pci_dev *pdev;
+
+	atomic_t state;
+	unsigned long flags;
+	unsigned long timeout;
+	refcount_t refcnt;
+
+	u8 idx;
+	int node;
+	u16 qlen;
+	u16 nr_queues;
+	enum vf_mode mode;
+
+	struct dma_pool *ctx_pool;
+	struct nitrox_cmdq *pkt_inq;
+	struct nitrox_cmdq *aqmq[MAX_DEV_QUEUES] ____cacheline_aligned_in_smp;
+
+	struct nitrox_q_vector *qvec;
+	struct nitrox_iov iov;
+	int num_vecs;
+
+	struct nitrox_stats stats;
+	struct nitrox_hw hw;
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+	struct dentry *debugfs_dir;
+#endif
+};
+
+/**
+ * nitrox_read_csr - Read from device register
+ * @ndev: NITROX device
+ * @offset: offset of the register to read
+ *
+ * Returns: value read
+ */
+static inline u64 nitrox_read_csr(struct nitrox_device *ndev, u64 offset)
+{
+	return readq(ndev->bar_addr + offset);
+}
+
+/**
+ * nitrox_write_csr - Write to device register
+ * @ndev: NITROX device
+ * @offset: offset of the register to write
+ * @value: value to write
+ */
+static inline void nitrox_write_csr(struct nitrox_device *ndev, u64 offset,
+				    u64 value)
+{
+	writeq(value, (ndev->bar_addr + offset));
+}
+
+static inline bool nitrox_ready(struct nitrox_device *ndev)
+{
+	return atomic_read(&ndev->state) == __NDEV_READY;
+}
+
+static inline bool nitrox_vfdev_ready(struct nitrox_vfdev *vfdev)
+{
+	return atomic_read(&vfdev->state) == __NDEV_READY;
+}
+
+#endif /* __NITROX_DEV_H */