Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 220 insertions, 0 deletions

diff --git a/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h b/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h
new file mode 100644
index 000000000..4db01bbef
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h
@@ -0,0 +1,220 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ISH registers definitions
+ *
+ * Copyright (c) 2012-2016, Intel Corporation.
+ */
+
+#ifndef _ISHTP_ISH_REGS_H_
+#define _ISHTP_ISH_REGS_H_
+
+
+/*** IPC PCI Offsets and sizes ***/
+/* ISH IPC Base Address */
+#define IPC_REG_BASE		0x0000
+/* Peripheral Interrupt Status Register */
+#define IPC_REG_PISR_CHV_AB      (IPC_REG_BASE + 0x00)
+/* Peripheral Interrupt Mask Register */
+#define IPC_REG_PIMR_CHV_AB      (IPC_REG_BASE + 0x04)
+/*BXT, CHV_K0*/
+/*Peripheral Interrupt Status Register */
+#define IPC_REG_PISR_BXT	 (IPC_REG_BASE + 0x0C)
+/*Peripheral Interrupt Mask Register */
+#define IPC_REG_PIMR_BXT	 (IPC_REG_BASE + 0x08)
+/***********************************/
+/* ISH Host Firmware status Register */
+#define IPC_REG_ISH_HOST_FWSTS	(IPC_REG_BASE + 0x34)
+/* Host Communication Register */
+#define IPC_REG_HOST_COMM	(IPC_REG_BASE + 0x38)
+/* Reset register */
+#define IPC_REG_ISH_RST		(IPC_REG_BASE + 0x44)
+
+/* Inbound doorbell register Host to ISH */
+#define IPC_REG_HOST2ISH_DRBL	(IPC_REG_BASE + 0x48)
+/* Outbound doorbell register ISH to Host */
+#define IPC_REG_ISH2HOST_DRBL	(IPC_REG_BASE + 0x54)
+/* ISH to HOST message registers */
+#define IPC_REG_ISH2HOST_MSG	(IPC_REG_BASE + 0x60)
+/* HOST to ISH message registers */
+#define IPC_REG_HOST2ISH_MSG	(IPC_REG_BASE + 0xE0)
+/* REMAP2 to enable DMA (D3 RCR) */
+#define	IPC_REG_ISH_RMP2	(IPC_REG_BASE + 0x368)
+
+#define	IPC_REG_MAX		(IPC_REG_BASE + 0x400)
+
+/*** register bits - HISR ***/
+/* bit corresponds HOST2ISH interrupt in PISR and PIMR registers */
+#define IPC_INT_HOST2ISH_BIT            (1<<0)
+/***********************************/
+/*CHV_A0, CHV_B0*/
+/* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */
+#define IPC_INT_ISH2HOST_BIT_CHV_AB	(1<<3)
+/*BXT, CHV_K0*/
+/* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */
+#define IPC_INT_ISH2HOST_BIT_BXT	(1<<0)
+/***********************************/
+
+/* bit corresponds ISH2HOST busy clear interrupt in PIMR register */
+#define IPC_INT_ISH2HOST_CLR_MASK_BIT	(1<<11)
+
+/* offset of ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */
+#define IPC_INT_ISH2HOST_CLR_OFFS	(0)
+
+/* bit corresponds ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */
+#define IPC_INT_ISH2HOST_CLR_BIT	(1<<IPC_INT_ISH2HOST_CLR_OFFS)
+
+/* bit corresponds busy bit in doorbell registers */
+#define IPC_DRBL_BUSY_OFFS		(31)
+#define IPC_DRBL_BUSY_BIT		(1<<IPC_DRBL_BUSY_OFFS)
+
+#define	IPC_HOST_OWNS_MSG_OFFS		(30)
+
+/*
+ * A0: bit means that host owns MSGnn registers and is reading them.
+ * ISH FW may not write to them
+ */
+#define	IPC_HOST_OWNS_MSG_BIT		(1<<IPC_HOST_OWNS_MSG_OFFS)
+
+/*
+ * Host status bits (HOSTCOMM)
+ */
+/* bit corresponds host ready bit in Host Status Register (HOST_COMM) */
+#define IPC_HOSTCOMM_READY_OFFS		(7)
+#define IPC_HOSTCOMM_READY_BIT		(1<<IPC_HOSTCOMM_READY_OFFS)
+
+/***********************************/
+/*CHV_A0, CHV_B0*/
+#define	IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB	(31)
+#define	IPC_HOSTCOMM_INT_EN_BIT_CHV_AB		\
+	(1<<IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB)
+/*BXT, CHV_K0*/
+#define IPC_PIMR_INT_EN_OFFS_BXT	(0)
+#define IPC_PIMR_INT_EN_BIT_BXT		(1<<IPC_PIMR_INT_EN_OFFS_BXT)
+
+#define IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT	(8)
+#define IPC_HOST2ISH_BUSYCLEAR_MASK_BIT		\
+	(1<<IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT)
+/***********************************/
+/*
+ * both Host and ISH have ILUP at bit 0
+ * bit corresponds host ready bit in both status registers
+ */
+#define IPC_ILUP_OFFS			(0)
+#define IPC_ILUP_BIT			(1<<IPC_ILUP_OFFS)
+
+/*
+ * ISH FW status bits in ISH FW Status Register
+ */
+#define IPC_ISH_FWSTS_SHIFT		12
+#define IPC_ISH_FWSTS_MASK		GENMASK(15, 12)
+#define IPC_GET_ISH_FWSTS(status)	\
+	(((status) & IPC_ISH_FWSTS_MASK) >> IPC_ISH_FWSTS_SHIFT)
+
+/*
+ * FW status bits (relevant)
+ */
+#define	IPC_FWSTS_ILUP		0x1
+#define	IPC_FWSTS_ISHTP_UP	(1<<1)
+#define	IPC_FWSTS_DMA0		(1<<16)
+#define	IPC_FWSTS_DMA1		(1<<17)
+#define	IPC_FWSTS_DMA2		(1<<18)
+#define	IPC_FWSTS_DMA3		(1<<19)
+
+#define	IPC_ISH_IN_DMA		\
+	(IPC_FWSTS_DMA0 | IPC_FWSTS_DMA1 | IPC_FWSTS_DMA2 | IPC_FWSTS_DMA3)
+
+/* bit corresponds host ready bit in ISH FW Status Register */
+#define IPC_ISH_ISHTP_READY_OFFS		(1)
+#define IPC_ISH_ISHTP_READY_BIT		(1<<IPC_ISH_ISHTP_READY_OFFS)
+
+#define	IPC_RMP2_DMA_ENABLED	0x1	/* Value to enable DMA, per D3 RCR */
+
+#define IPC_MSG_MAX_SIZE	0x80
+
+
+#define IPC_HEADER_LENGTH_MASK		0x03FF
+#define IPC_HEADER_PROTOCOL_MASK	0x0F
+#define IPC_HEADER_MNG_CMD_MASK		0x0F
+
+#define IPC_HEADER_LENGTH_OFFSET	0
+#define IPC_HEADER_PROTOCOL_OFFSET	10
+#define IPC_HEADER_MNG_CMD_OFFSET	16
+
+#define IPC_HEADER_GET_LENGTH(drbl_reg)		\
+	(((drbl_reg) >> IPC_HEADER_LENGTH_OFFSET)&IPC_HEADER_LENGTH_MASK)
+#define IPC_HEADER_GET_PROTOCOL(drbl_reg)	\
+	(((drbl_reg) >> IPC_HEADER_PROTOCOL_OFFSET)&IPC_HEADER_PROTOCOL_MASK)
+#define IPC_HEADER_GET_MNG_CMD(drbl_reg)	\
+	(((drbl_reg) >> IPC_HEADER_MNG_CMD_OFFSET)&IPC_HEADER_MNG_CMD_MASK)
+
+#define IPC_IS_BUSY(drbl_reg)			\
+	(((drbl_reg)&IPC_DRBL_BUSY_BIT) == ((uint32_t)IPC_DRBL_BUSY_BIT))
+
+/***********************************/
+/*CHV_A0, CHV_B0*/
+#define IPC_INT_FROM_ISH_TO_HOST_CHV_AB(drbl_reg) \
+	(((drbl_reg)&IPC_INT_ISH2HOST_BIT_CHV_AB) == \
+	((u32)IPC_INT_ISH2HOST_BIT_CHV_AB))
+/*BXT, CHV_K0*/
+#define IPC_INT_FROM_ISH_TO_HOST_BXT(drbl_reg) \
+	(((drbl_reg)&IPC_INT_ISH2HOST_BIT_BXT) == \
+	((u32)IPC_INT_ISH2HOST_BIT_BXT))
+/***********************************/
+
+#define IPC_BUILD_HEADER(length, protocol, busy)		\
+	(((busy)<<IPC_DRBL_BUSY_OFFS) |				\
+	((protocol) << IPC_HEADER_PROTOCOL_OFFSET) |		\
+	((length)<<IPC_HEADER_LENGTH_OFFSET))
+
+#define IPC_BUILD_MNG_MSG(cmd, length)				\
+	(((1)<<IPC_DRBL_BUSY_OFFS)|				\
+	((IPC_PROTOCOL_MNG)<<IPC_HEADER_PROTOCOL_OFFSET)|	\
+	((cmd)<<IPC_HEADER_MNG_CMD_OFFSET)|			\
+	 ((length)<<IPC_HEADER_LENGTH_OFFSET))
+
+
+#define IPC_SET_HOST_READY(host_status)		\
+				((host_status) |= (IPC_HOSTCOMM_READY_BIT))
+
+#define IPC_SET_HOST_ILUP(host_status)		\
+				((host_status) |= (IPC_ILUP_BIT))
+
+#define IPC_CLEAR_HOST_READY(host_status)	\
+				((host_status) ^= (IPC_HOSTCOMM_READY_BIT))
+
+#define IPC_CLEAR_HOST_ILUP(host_status)	\
+				((host_status) ^= (IPC_ILUP_BIT))
+
+/* todo - temp until PIMR HW ready */
+#define IPC_HOST_BUSY_READING_OFFS	6
+
+/* bit corresponds host ready bit in Host Status Register (HOST_COMM) */
+#define IPC_HOST_BUSY_READING_BIT	(1<<IPC_HOST_BUSY_READING_OFFS)
+
+#define IPC_SET_HOST_BUSY_READING(host_status)	\
+				((host_status) |= (IPC_HOST_BUSY_READING_BIT))
+
+#define IPC_CLEAR_HOST_BUSY_READING(host_status)\
+				((host_status) ^= (IPC_HOST_BUSY_READING_BIT))
+
+
+#define IPC_IS_ISH_ISHTP_READY(ish_status)	\
+		(((ish_status) & IPC_ISH_ISHTP_READY_BIT) ==	\
+			((uint32_t)IPC_ISH_ISHTP_READY_BIT))
+
+#define IPC_IS_ISH_ILUP(ish_status)		\
+		(((ish_status) & IPC_ILUP_BIT) == ((uint32_t)IPC_ILUP_BIT))
+
+
+#define IPC_PROTOCOL_ISHTP		1
+#define IPC_PROTOCOL_MNG		3
+
+#define MNG_RX_CMPL_ENABLE		0
+#define MNG_RX_CMPL_DISABLE		1
+#define MNG_RX_CMPL_INDICATION		2
+#define MNG_RESET_NOTIFY		3
+#define MNG_RESET_NOTIFY_ACK		4
+#define MNG_SYNC_FW_CLOCK		5
+#define MNG_ILLEGAL_CMD			0xFF
+
+#endif /* _ISHTP_ISH_REGS_H_ */