Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 1605 insertions, 0 deletions

diff --git a/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h b/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h
new file mode 100644
index 000000000..4db01bbef
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ipc/hw-ish-regs.h
@@ -0,0 +1,220 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ISH registers definitions
+ *
+ * Copyright (c) 2012-2016, Intel Corporation.
+ */
+
+#ifndef _ISHTP_ISH_REGS_H_
+#define _ISHTP_ISH_REGS_H_
+
+
+/*** IPC PCI Offsets and sizes ***/
+/* ISH IPC Base Address */
+#define IPC_REG_BASE		0x0000
+/* Peripheral Interrupt Status Register */
+#define IPC_REG_PISR_CHV_AB      (IPC_REG_BASE + 0x00)
+/* Peripheral Interrupt Mask Register */
+#define IPC_REG_PIMR_CHV_AB      (IPC_REG_BASE + 0x04)
+/*BXT, CHV_K0*/
+/*Peripheral Interrupt Status Register */
+#define IPC_REG_PISR_BXT	 (IPC_REG_BASE + 0x0C)
+/*Peripheral Interrupt Mask Register */
+#define IPC_REG_PIMR_BXT	 (IPC_REG_BASE + 0x08)
+/***********************************/
+/* ISH Host Firmware status Register */
+#define IPC_REG_ISH_HOST_FWSTS	(IPC_REG_BASE + 0x34)
+/* Host Communication Register */
+#define IPC_REG_HOST_COMM	(IPC_REG_BASE + 0x38)
+/* Reset register */
+#define IPC_REG_ISH_RST		(IPC_REG_BASE + 0x44)
+
+/* Inbound doorbell register Host to ISH */
+#define IPC_REG_HOST2ISH_DRBL	(IPC_REG_BASE + 0x48)
+/* Outbound doorbell register ISH to Host */
+#define IPC_REG_ISH2HOST_DRBL	(IPC_REG_BASE + 0x54)
+/* ISH to HOST message registers */
+#define IPC_REG_ISH2HOST_MSG	(IPC_REG_BASE + 0x60)
+/* HOST to ISH message registers */
+#define IPC_REG_HOST2ISH_MSG	(IPC_REG_BASE + 0xE0)
+/* REMAP2 to enable DMA (D3 RCR) */
+#define	IPC_REG_ISH_RMP2	(IPC_REG_BASE + 0x368)
+
+#define	IPC_REG_MAX		(IPC_REG_BASE + 0x400)
+
+/*** register bits - HISR ***/
+/* bit corresponds HOST2ISH interrupt in PISR and PIMR registers */
+#define IPC_INT_HOST2ISH_BIT            (1<<0)
+/***********************************/
+/*CHV_A0, CHV_B0*/
+/* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */
+#define IPC_INT_ISH2HOST_BIT_CHV_AB	(1<<3)
+/*BXT, CHV_K0*/
+/* bit corresponds ISH2HOST interrupt in PISR and PIMR registers */
+#define IPC_INT_ISH2HOST_BIT_BXT	(1<<0)
+/***********************************/
+
+/* bit corresponds ISH2HOST busy clear interrupt in PIMR register */
+#define IPC_INT_ISH2HOST_CLR_MASK_BIT	(1<<11)
+
+/* offset of ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */
+#define IPC_INT_ISH2HOST_CLR_OFFS	(0)
+
+/* bit corresponds ISH2HOST busy clear interrupt in IPC_BUSY_CLR register */
+#define IPC_INT_ISH2HOST_CLR_BIT	(1<<IPC_INT_ISH2HOST_CLR_OFFS)
+
+/* bit corresponds busy bit in doorbell registers */
+#define IPC_DRBL_BUSY_OFFS		(31)
+#define IPC_DRBL_BUSY_BIT		(1<<IPC_DRBL_BUSY_OFFS)
+
+#define	IPC_HOST_OWNS_MSG_OFFS		(30)
+
+/*
+ * A0: bit means that host owns MSGnn registers and is reading them.
+ * ISH FW may not write to them
+ */
+#define	IPC_HOST_OWNS_MSG_BIT		(1<<IPC_HOST_OWNS_MSG_OFFS)
+
+/*
+ * Host status bits (HOSTCOMM)
+ */
+/* bit corresponds host ready bit in Host Status Register (HOST_COMM) */
+#define IPC_HOSTCOMM_READY_OFFS		(7)
+#define IPC_HOSTCOMM_READY_BIT		(1<<IPC_HOSTCOMM_READY_OFFS)
+
+/***********************************/
+/*CHV_A0, CHV_B0*/
+#define	IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB	(31)
+#define	IPC_HOSTCOMM_INT_EN_BIT_CHV_AB		\
+	(1<<IPC_HOSTCOMM_INT_EN_OFFS_CHV_AB)
+/*BXT, CHV_K0*/
+#define IPC_PIMR_INT_EN_OFFS_BXT	(0)
+#define IPC_PIMR_INT_EN_BIT_BXT		(1<<IPC_PIMR_INT_EN_OFFS_BXT)
+
+#define IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT	(8)
+#define IPC_HOST2ISH_BUSYCLEAR_MASK_BIT		\
+	(1<<IPC_HOST2ISH_BUSYCLEAR_MASK_OFFS_BXT)
+/***********************************/
+/*
+ * both Host and ISH have ILUP at bit 0
+ * bit corresponds host ready bit in both status registers
+ */
+#define IPC_ILUP_OFFS			(0)
+#define IPC_ILUP_BIT			(1<<IPC_ILUP_OFFS)
+
+/*
+ * ISH FW status bits in ISH FW Status Register
+ */
+#define IPC_ISH_FWSTS_SHIFT		12
+#define IPC_ISH_FWSTS_MASK		GENMASK(15, 12)
+#define IPC_GET_ISH_FWSTS(status)	\
+	(((status) & IPC_ISH_FWSTS_MASK) >> IPC_ISH_FWSTS_SHIFT)
+
+/*
+ * FW status bits (relevant)
+ */
+#define	IPC_FWSTS_ILUP		0x1
+#define	IPC_FWSTS_ISHTP_UP	(1<<1)
+#define	IPC_FWSTS_DMA0		(1<<16)
+#define	IPC_FWSTS_DMA1		(1<<17)
+#define	IPC_FWSTS_DMA2		(1<<18)
+#define	IPC_FWSTS_DMA3		(1<<19)
+
+#define	IPC_ISH_IN_DMA		\
+	(IPC_FWSTS_DMA0 | IPC_FWSTS_DMA1 | IPC_FWSTS_DMA2 | IPC_FWSTS_DMA3)
+
+/* bit corresponds host ready bit in ISH FW Status Register */
+#define IPC_ISH_ISHTP_READY_OFFS		(1)
+#define IPC_ISH_ISHTP_READY_BIT		(1<<IPC_ISH_ISHTP_READY_OFFS)
+
+#define	IPC_RMP2_DMA_ENABLED	0x1	/* Value to enable DMA, per D3 RCR */
+
+#define IPC_MSG_MAX_SIZE	0x80
+
+
+#define IPC_HEADER_LENGTH_MASK		0x03FF
+#define IPC_HEADER_PROTOCOL_MASK	0x0F
+#define IPC_HEADER_MNG_CMD_MASK		0x0F
+
+#define IPC_HEADER_LENGTH_OFFSET	0
+#define IPC_HEADER_PROTOCOL_OFFSET	10
+#define IPC_HEADER_MNG_CMD_OFFSET	16
+
+#define IPC_HEADER_GET_LENGTH(drbl_reg)		\
+	(((drbl_reg) >> IPC_HEADER_LENGTH_OFFSET)&IPC_HEADER_LENGTH_MASK)
+#define IPC_HEADER_GET_PROTOCOL(drbl_reg)	\
+	(((drbl_reg) >> IPC_HEADER_PROTOCOL_OFFSET)&IPC_HEADER_PROTOCOL_MASK)
+#define IPC_HEADER_GET_MNG_CMD(drbl_reg)	\
+	(((drbl_reg) >> IPC_HEADER_MNG_CMD_OFFSET)&IPC_HEADER_MNG_CMD_MASK)
+
+#define IPC_IS_BUSY(drbl_reg)			\
+	(((drbl_reg)&IPC_DRBL_BUSY_BIT) == ((uint32_t)IPC_DRBL_BUSY_BIT))
+
+/***********************************/
+/*CHV_A0, CHV_B0*/
+#define IPC_INT_FROM_ISH_TO_HOST_CHV_AB(drbl_reg) \
+	(((drbl_reg)&IPC_INT_ISH2HOST_BIT_CHV_AB) == \
+	((u32)IPC_INT_ISH2HOST_BIT_CHV_AB))
+/*BXT, CHV_K0*/
+#define IPC_INT_FROM_ISH_TO_HOST_BXT(drbl_reg) \
+	(((drbl_reg)&IPC_INT_ISH2HOST_BIT_BXT) == \
+	((u32)IPC_INT_ISH2HOST_BIT_BXT))
+/***********************************/
+
+#define IPC_BUILD_HEADER(length, protocol, busy)		\
+	(((busy)<<IPC_DRBL_BUSY_OFFS) |				\
+	((protocol) << IPC_HEADER_PROTOCOL_OFFSET) |		\
+	((length)<<IPC_HEADER_LENGTH_OFFSET))
+
+#define IPC_BUILD_MNG_MSG(cmd, length)				\
+	(((1)<<IPC_DRBL_BUSY_OFFS)|				\
+	((IPC_PROTOCOL_MNG)<<IPC_HEADER_PROTOCOL_OFFSET)|	\
+	((cmd)<<IPC_HEADER_MNG_CMD_OFFSET)|			\
+	 ((length)<<IPC_HEADER_LENGTH_OFFSET))
+
+
+#define IPC_SET_HOST_READY(host_status)		\
+				((host_status) |= (IPC_HOSTCOMM_READY_BIT))
+
+#define IPC_SET_HOST_ILUP(host_status)		\
+				((host_status) |= (IPC_ILUP_BIT))
+
+#define IPC_CLEAR_HOST_READY(host_status)	\
+				((host_status) ^= (IPC_HOSTCOMM_READY_BIT))
+
+#define IPC_CLEAR_HOST_ILUP(host_status)	\
+				((host_status) ^= (IPC_ILUP_BIT))
+
+/* todo - temp until PIMR HW ready */
+#define IPC_HOST_BUSY_READING_OFFS	6
+
+/* bit corresponds host ready bit in Host Status Register (HOST_COMM) */
+#define IPC_HOST_BUSY_READING_BIT	(1<<IPC_HOST_BUSY_READING_OFFS)
+
+#define IPC_SET_HOST_BUSY_READING(host_status)	\
+				((host_status) |= (IPC_HOST_BUSY_READING_BIT))
+
+#define IPC_CLEAR_HOST_BUSY_READING(host_status)\
+				((host_status) ^= (IPC_HOST_BUSY_READING_BIT))
+
+
+#define IPC_IS_ISH_ISHTP_READY(ish_status)	\
+		(((ish_status) & IPC_ISH_ISHTP_READY_BIT) ==	\
+			((uint32_t)IPC_ISH_ISHTP_READY_BIT))
+
+#define IPC_IS_ISH_ILUP(ish_status)		\
+		(((ish_status) & IPC_ILUP_BIT) == ((uint32_t)IPC_ILUP_BIT))
+
+
+#define IPC_PROTOCOL_ISHTP		1
+#define IPC_PROTOCOL_MNG		3
+
+#define MNG_RX_CMPL_ENABLE		0
+#define MNG_RX_CMPL_DISABLE		1
+#define MNG_RX_CMPL_INDICATION		2
+#define MNG_RESET_NOTIFY		3
+#define MNG_RESET_NOTIFY_ACK		4
+#define MNG_SYNC_FW_CLOCK		5
+#define MNG_ILLEGAL_CMD			0xFF
+
+#endif /* _ISHTP_ISH_REGS_H_ */
diff --git a/drivers/hid/intel-ish-hid/ipc/hw-ish.h b/drivers/hid/intel-ish-hid/ipc/hw-ish.h
new file mode 100644
index 000000000..1fb294ca4
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ipc/hw-ish.h
@@ -0,0 +1,85 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * H/W layer of ISHTP provider device (ISH)
+ *
+ * Copyright (c) 2014-2016, Intel Corporation.
+ */
+
+#ifndef _ISHTP_HW_ISH_H_
+#define _ISHTP_HW_ISH_H_
+
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include "hw-ish-regs.h"
+#include "ishtp-dev.h"
+
+#define CHV_DEVICE_ID		0x22D8
+#define BXT_Ax_DEVICE_ID	0x0AA2
+#define BXT_Bx_DEVICE_ID	0x1AA2
+#define APL_Ax_DEVICE_ID	0x5AA2
+#define SPT_Ax_DEVICE_ID	0x9D35
+#define CNL_Ax_DEVICE_ID	0x9DFC
+#define GLK_Ax_DEVICE_ID	0x31A2
+#define CNL_H_DEVICE_ID		0xA37C
+#define ICL_MOBILE_DEVICE_ID	0x34FC
+#define SPT_H_DEVICE_ID		0xA135
+#define CML_LP_DEVICE_ID	0x02FC
+#define CMP_H_DEVICE_ID		0x06FC
+#define EHL_Ax_DEVICE_ID	0x4BB3
+#define TGL_LP_DEVICE_ID	0xA0FC
+
+#define	REVISION_ID_CHT_A0	0x6
+#define	REVISION_ID_CHT_Ax_SI	0x0
+#define	REVISION_ID_CHT_Bx_SI	0x10
+#define	REVISION_ID_CHT_Kx_SI	0x20
+#define	REVISION_ID_CHT_Dx_SI	0x30
+#define	REVISION_ID_CHT_B0	0xB0
+#define	REVISION_ID_SI_MASK	0x70
+
+struct ipc_rst_payload_type {
+	uint16_t	reset_id;
+	uint16_t	reserved;
+};
+
+struct time_sync_format {
+	uint8_t ts1_source;
+	uint8_t ts2_source;
+	uint16_t reserved;
+} __packed;
+
+struct ipc_time_update_msg {
+	uint64_t primary_host_time;
+	struct time_sync_format sync_info;
+	uint64_t secondary_host_time;
+} __packed;
+
+enum {
+	HOST_UTC_TIME_USEC = 0,
+	HOST_SYSTEM_TIME_USEC = 1
+};
+
+struct ish_hw {
+	void __iomem *mem_addr;
+};
+
+/*
+ * ISH FW status type
+ */
+enum {
+	FWSTS_AFTER_RESET		= 0,
+	FWSTS_WAIT_FOR_HOST		= 4,
+	FWSTS_START_KERNEL_DMA		= 5,
+	FWSTS_FW_IS_RUNNING		= 7,
+	FWSTS_SENSOR_APP_LOADED		= 8,
+	FWSTS_SENSOR_APP_RUNNING	= 15
+};
+
+#define to_ish_hw(dev) (struct ish_hw *)((dev)->hw)
+
+irqreturn_t ish_irq_handler(int irq, void *dev_id);
+struct ishtp_device *ish_dev_init(struct pci_dev *pdev);
+int ish_hw_start(struct ishtp_device *dev);
+void ish_device_disable(struct ishtp_device *dev);
+int ish_disable_dma(struct ishtp_device *dev);
+
+#endif /* _ISHTP_HW_ISH_H_ */
diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c
new file mode 100644
index 000000000..a45ac7fa4
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ipc/ipc.c
@@ -0,0 +1,954 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * H/W layer of ISHTP provider device (ISH)
+ *
+ * Copyright (c) 2014-2016, Intel Corporation.
+ */
+
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include "client.h"
+#include "hw-ish.h"
+#include "hbm.h"
+
+/* For FW reset flow */
+static struct work_struct fw_reset_work;
+static struct ishtp_device *ishtp_dev;
+
+/**
+ * ish_reg_read() - Read register
+ * @dev: ISHTP device pointer
+ * @offset: Register offset
+ *
+ * Read 32 bit register at a given offset
+ *
+ * Return: Read register value
+ */
+static inline uint32_t ish_reg_read(const struct ishtp_device *dev,
+	unsigned long offset)
+{
+	struct ish_hw *hw = to_ish_hw(dev);
+
+	return readl(hw->mem_addr + offset);
+}
+
+/**
+ * ish_reg_write() - Write register
+ * @dev: ISHTP device pointer
+ * @offset: Register offset
+ * @value: Value to write
+ *
+ * Writes 32 bit register at a give offset
+ */
+static inline void ish_reg_write(struct ishtp_device *dev,
+				 unsigned long offset,
+				 uint32_t value)
+{
+	struct ish_hw *hw = to_ish_hw(dev);
+
+	writel(value, hw->mem_addr + offset);
+}
+
+/**
+ * _ish_read_fw_sts_reg() - Read FW status register
+ * @dev: ISHTP device pointer
+ *
+ * Read FW status register
+ *
+ * Return: Read register value
+ */
+static inline uint32_t _ish_read_fw_sts_reg(struct ishtp_device *dev)
+{
+	return ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+}
+
+/**
+ * check_generated_interrupt() - Check if ISH interrupt
+ * @dev: ISHTP device pointer
+ *
+ * Check if an interrupt was generated for ISH
+ *
+ * Return: Read true or false
+ */
+static bool check_generated_interrupt(struct ishtp_device *dev)
+{
+	bool interrupt_generated = true;
+	uint32_t pisr_val = 0;
+
+	if (dev->pdev->device == CHV_DEVICE_ID) {
+		pisr_val = ish_reg_read(dev, IPC_REG_PISR_CHV_AB);
+		interrupt_generated =
+			IPC_INT_FROM_ISH_TO_HOST_CHV_AB(pisr_val);
+	} else {
+		pisr_val = ish_reg_read(dev, IPC_REG_PISR_BXT);
+		interrupt_generated = !!pisr_val;
+		/* only busy-clear bit is RW, others are RO */
+		if (pisr_val)
+			ish_reg_write(dev, IPC_REG_PISR_BXT, pisr_val);
+	}
+
+	return interrupt_generated;
+}
+
+/**
+ * ish_is_input_ready() - Check if FW ready for RX
+ * @dev: ISHTP device pointer
+ *
+ * Check if ISH FW is ready for receiving data
+ *
+ * Return: Read true or false
+ */
+static bool ish_is_input_ready(struct ishtp_device *dev)
+{
+	uint32_t doorbell_val;
+
+	doorbell_val = ish_reg_read(dev, IPC_REG_HOST2ISH_DRBL);
+	return !IPC_IS_BUSY(doorbell_val);
+}
+
+/**
+ * set_host_ready() - Indicate host ready
+ * @dev: ISHTP device pointer
+ *
+ * Set host ready indication to FW
+ */
+static void set_host_ready(struct ishtp_device *dev)
+{
+	if (dev->pdev->device == CHV_DEVICE_ID) {
+		if (dev->pdev->revision == REVISION_ID_CHT_A0 ||
+				(dev->pdev->revision & REVISION_ID_SI_MASK) ==
+				REVISION_ID_CHT_Ax_SI)
+			ish_reg_write(dev, IPC_REG_HOST_COMM, 0x81);
+		else if (dev->pdev->revision == REVISION_ID_CHT_B0 ||
+				(dev->pdev->revision & REVISION_ID_SI_MASK) ==
+				REVISION_ID_CHT_Bx_SI ||
+				(dev->pdev->revision & REVISION_ID_SI_MASK) ==
+				REVISION_ID_CHT_Kx_SI ||
+				(dev->pdev->revision & REVISION_ID_SI_MASK) ==
+				REVISION_ID_CHT_Dx_SI) {
+			uint32_t host_comm_val;
+
+			host_comm_val = ish_reg_read(dev, IPC_REG_HOST_COMM);
+			host_comm_val |= IPC_HOSTCOMM_INT_EN_BIT_CHV_AB | 0x81;
+			ish_reg_write(dev, IPC_REG_HOST_COMM, host_comm_val);
+		}
+	} else {
+			uint32_t host_pimr_val;
+
+			host_pimr_val = ish_reg_read(dev, IPC_REG_PIMR_BXT);
+			host_pimr_val |= IPC_PIMR_INT_EN_BIT_BXT;
+			/*
+			 * disable interrupt generated instead of
+			 * RX_complete_msg
+			 */
+			host_pimr_val &= ~IPC_HOST2ISH_BUSYCLEAR_MASK_BIT;
+
+			ish_reg_write(dev, IPC_REG_PIMR_BXT, host_pimr_val);
+	}
+}
+
+/**
+ * ishtp_fw_is_ready() - Check if FW ready
+ * @dev: ISHTP device pointer
+ *
+ * Check if ISH FW is ready
+ *
+ * Return: Read true or false
+ */
+static bool ishtp_fw_is_ready(struct ishtp_device *dev)
+{
+	uint32_t ish_status = _ish_read_fw_sts_reg(dev);
+
+	return IPC_IS_ISH_ILUP(ish_status) &&
+		IPC_IS_ISH_ISHTP_READY(ish_status);
+}
+
+/**
+ * ish_set_host_rdy() - Indicate host ready
+ * @dev: ISHTP device pointer
+ *
+ * Set host ready indication to FW
+ */
+static void ish_set_host_rdy(struct ishtp_device *dev)
+{
+	uint32_t host_status = ish_reg_read(dev, IPC_REG_HOST_COMM);
+
+	IPC_SET_HOST_READY(host_status);
+	ish_reg_write(dev, IPC_REG_HOST_COMM, host_status);
+}
+
+/**
+ * ish_clr_host_rdy() - Indicate host not ready
+ * @dev: ISHTP device pointer
+ *
+ * Send host not ready indication to FW
+ */
+static void ish_clr_host_rdy(struct ishtp_device *dev)
+{
+	uint32_t host_status = ish_reg_read(dev, IPC_REG_HOST_COMM);
+
+	IPC_CLEAR_HOST_READY(host_status);
+	ish_reg_write(dev, IPC_REG_HOST_COMM, host_status);
+}
+
+/**
+ * _ishtp_read_hdr() - Read message header
+ * @dev: ISHTP device pointer
+ *
+ * Read header of 32bit length
+ *
+ * Return: Read register value
+ */
+static uint32_t _ishtp_read_hdr(const struct ishtp_device *dev)
+{
+	return ish_reg_read(dev, IPC_REG_ISH2HOST_MSG);
+}
+
+/**
+ * _ishtp_read - Read message
+ * @dev: ISHTP device pointer
+ * @buffer: message buffer
+ * @buffer_length: length of message buffer
+ *
+ * Read message from FW
+ *
+ * Return: Always 0
+ */
+static int _ishtp_read(struct ishtp_device *dev, unsigned char *buffer,
+	unsigned long buffer_length)
+{
+	uint32_t	i;
+	uint32_t	*r_buf = (uint32_t *)buffer;
+	uint32_t	msg_offs;
+
+	msg_offs = IPC_REG_ISH2HOST_MSG + sizeof(struct ishtp_msg_hdr);
+	for (i = 0; i < buffer_length; i += sizeof(uint32_t))
+		*r_buf++ = ish_reg_read(dev, msg_offs + i);
+
+	return 0;
+}
+
+/**
+ * write_ipc_from_queue() - try to write ipc msg from Tx queue to device
+ * @dev: ishtp device pointer
+ *
+ * Check if DRBL is cleared. if it is - write the first IPC msg,  then call
+ * the callback function (unless it's NULL)
+ *
+ * Return: 0 for success else failure code
+ */
+static int write_ipc_from_queue(struct ishtp_device *dev)
+{
+	struct wr_msg_ctl_info	*ipc_link;
+	unsigned long	length;
+	unsigned long	rem;
+	unsigned long	flags;
+	uint32_t	doorbell_val;
+	uint32_t	*r_buf;
+	uint32_t	reg_addr;
+	int	i;
+	void	(*ipc_send_compl)(void *);
+	void	*ipc_send_compl_prm;
+
+	if (dev->dev_state == ISHTP_DEV_DISABLED)
+		return -EINVAL;
+
+	spin_lock_irqsave(&dev->wr_processing_spinlock, flags);
+	if (!ish_is_input_ready(dev)) {
+		spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+		return -EBUSY;
+	}
+
+	/*
+	 * if tx send list is empty - return 0;
+	 * may happen, as RX_COMPLETE handler doesn't check list emptiness.
+	 */
+	if (list_empty(&dev->wr_processing_list)) {
+		spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+		return	0;
+	}
+
+	ipc_link = list_first_entry(&dev->wr_processing_list,
+				    struct wr_msg_ctl_info, link);
+	/* first 4 bytes of the data is the doorbell value (IPC header) */
+	length = ipc_link->length - sizeof(uint32_t);
+	doorbell_val = *(uint32_t *)ipc_link->inline_data;
+	r_buf = (uint32_t *)(ipc_link->inline_data + sizeof(uint32_t));
+
+	/* If sending MNG_SYNC_FW_CLOCK, update clock again */
+	if (IPC_HEADER_GET_PROTOCOL(doorbell_val) == IPC_PROTOCOL_MNG &&
+		IPC_HEADER_GET_MNG_CMD(doorbell_val) == MNG_SYNC_FW_CLOCK) {
+		uint64_t usec_system, usec_utc;
+		struct ipc_time_update_msg time_update;
+		struct time_sync_format ts_format;
+
+		usec_system = ktime_to_us(ktime_get_boottime());
+		usec_utc = ktime_to_us(ktime_get_real());
+		ts_format.ts1_source = HOST_SYSTEM_TIME_USEC;
+		ts_format.ts2_source = HOST_UTC_TIME_USEC;
+		ts_format.reserved = 0;
+
+		time_update.primary_host_time = usec_system;
+		time_update.secondary_host_time = usec_utc;
+		time_update.sync_info = ts_format;
+
+		memcpy(r_buf, &time_update,
+		       sizeof(struct ipc_time_update_msg));
+	}
+
+	for (i = 0, reg_addr = IPC_REG_HOST2ISH_MSG; i < length >> 2; i++,
+			reg_addr += 4)
+		ish_reg_write(dev, reg_addr, r_buf[i]);
+
+	rem = length & 0x3;
+	if (rem > 0) {
+		uint32_t reg = 0;
+
+		memcpy(&reg, &r_buf[length >> 2], rem);
+		ish_reg_write(dev, reg_addr, reg);
+	}
+	ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, doorbell_val);
+
+	/* Flush writes to msg registers and doorbell */
+	ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+
+	/* Update IPC counters */
+	++dev->ipc_tx_cnt;
+	dev->ipc_tx_bytes_cnt += IPC_HEADER_GET_LENGTH(doorbell_val);
+
+	ipc_send_compl = ipc_link->ipc_send_compl;
+	ipc_send_compl_prm = ipc_link->ipc_send_compl_prm;
+	list_del_init(&ipc_link->link);
+	list_add(&ipc_link->link, &dev->wr_free_list);
+	spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+
+	/*
+	 * callback will be called out of spinlock,
+	 * after ipc_link returned to free list
+	 */
+	if (ipc_send_compl)
+		ipc_send_compl(ipc_send_compl_prm);
+
+	return 0;
+}
+
+/**
+ * write_ipc_to_queue() - write ipc msg to Tx queue
+ * @dev: ishtp device instance
+ * @ipc_send_compl: Send complete callback
+ * @ipc_send_compl_prm:	Parameter to send in complete callback
+ * @msg: Pointer to message
+ * @length: Length of message
+ *
+ * Recived msg with IPC (and upper protocol) header  and add it to the device
+ *  Tx-to-write list then try to send the first IPC waiting msg
+ *  (if DRBL is cleared)
+ * This function returns negative value for failure (means free list
+ *  is empty, or msg too long) and 0 for success.
+ *
+ * Return: 0 for success else failure code
+ */
+static int write_ipc_to_queue(struct ishtp_device *dev,
+	void (*ipc_send_compl)(void *), void *ipc_send_compl_prm,
+	unsigned char *msg, int length)
+{
+	struct wr_msg_ctl_info *ipc_link;
+	unsigned long flags;
+
+	if (length > IPC_FULL_MSG_SIZE)
+		return -EMSGSIZE;
+
+	spin_lock_irqsave(&dev->wr_processing_spinlock, flags);
+	if (list_empty(&dev->wr_free_list)) {
+		spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+		return -ENOMEM;
+	}
+	ipc_link = list_first_entry(&dev->wr_free_list,
+				    struct wr_msg_ctl_info, link);
+	list_del_init(&ipc_link->link);
+
+	ipc_link->ipc_send_compl = ipc_send_compl;
+	ipc_link->ipc_send_compl_prm = ipc_send_compl_prm;
+	ipc_link->length = length;
+	memcpy(ipc_link->inline_data, msg, length);
+
+	list_add_tail(&ipc_link->link, &dev->wr_processing_list);
+	spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+
+	write_ipc_from_queue(dev);
+
+	return 0;
+}
+
+/**
+ * ipc_send_mng_msg() - Send management message
+ * @dev: ishtp device instance
+ * @msg_code: Message code
+ * @msg: Pointer to message
+ * @size: Length of message
+ *
+ * Send management message to FW
+ *
+ * Return: 0 for success else failure code
+ */
+static int ipc_send_mng_msg(struct ishtp_device *dev, uint32_t msg_code,
+	void *msg, size_t size)
+{
+	unsigned char	ipc_msg[IPC_FULL_MSG_SIZE];
+	uint32_t	drbl_val = IPC_BUILD_MNG_MSG(msg_code, size);
+
+	memcpy(ipc_msg, &drbl_val, sizeof(uint32_t));
+	memcpy(ipc_msg + sizeof(uint32_t), msg, size);
+	return	write_ipc_to_queue(dev, NULL, NULL, ipc_msg,
+		sizeof(uint32_t) + size);
+}
+
+#define WAIT_FOR_FW_RDY			0x1
+#define WAIT_FOR_INPUT_RDY		0x2
+
+/**
+ * timed_wait_for_timeout() - wait special event with timeout
+ * @dev: ISHTP device pointer
+ * @condition: indicate the condition for waiting
+ * @timeinc: time slice for every wait cycle, in ms
+ * @timeout: time in ms for timeout
+ *
+ * This function will check special event to be ready in a loop, the loop
+ * period is specificd in timeinc. Wait timeout will causes failure.
+ *
+ * Return: 0 for success else failure code
+ */
+static int timed_wait_for_timeout(struct ishtp_device *dev, int condition,
+				unsigned int timeinc, unsigned int timeout)
+{
+	bool complete = false;
+	int ret;
+
+	do {
+		if (condition == WAIT_FOR_FW_RDY) {
+			complete = ishtp_fw_is_ready(dev);
+		} else if (condition == WAIT_FOR_INPUT_RDY) {
+			complete = ish_is_input_ready(dev);
+		} else {
+			ret = -EINVAL;
+			goto out;
+		}
+
+		if (!complete) {
+			unsigned long left_time;
+
+			left_time = msleep_interruptible(timeinc);
+			timeout -= (timeinc - left_time);
+		}
+	} while (!complete && timeout > 0);
+
+	if (complete)
+		ret = 0;
+	else
+		ret = -EBUSY;
+
+out:
+	return ret;
+}
+
+#define TIME_SLICE_FOR_FW_RDY_MS		100
+#define TIME_SLICE_FOR_INPUT_RDY_MS		100
+#define TIMEOUT_FOR_FW_RDY_MS			2000
+#define TIMEOUT_FOR_INPUT_RDY_MS		2000
+
+/**
+ * ish_fw_reset_handler() - FW reset handler
+ * @dev: ishtp device pointer
+ *
+ * Handle FW reset
+ *
+ * Return: 0 for success else failure code
+ */
+static int ish_fw_reset_handler(struct ishtp_device *dev)
+{
+	uint32_t	reset_id;
+	unsigned long	flags;
+
+	/* Read reset ID */
+	reset_id = ish_reg_read(dev, IPC_REG_ISH2HOST_MSG) & 0xFFFF;
+
+	/* Clear IPC output queue */
+	spin_lock_irqsave(&dev->wr_processing_spinlock, flags);
+	list_splice_init(&dev->wr_processing_list, &dev->wr_free_list);
+	spin_unlock_irqrestore(&dev->wr_processing_spinlock, flags);
+
+	/* ISHTP notification in IPC_RESET */
+	ishtp_reset_handler(dev);
+
+	if (!ish_is_input_ready(dev))
+		timed_wait_for_timeout(dev, WAIT_FOR_INPUT_RDY,
+			TIME_SLICE_FOR_INPUT_RDY_MS, TIMEOUT_FOR_INPUT_RDY_MS);
+
+	/* ISH FW is dead */
+	if (!ish_is_input_ready(dev))
+		return	-EPIPE;
+	/*
+	 * Set HOST2ISH.ILUP. Apparently we need this BEFORE sending
+	 * RESET_NOTIFY_ACK - FW will be checking for it
+	 */
+	ish_set_host_rdy(dev);
+	/* Send RESET_NOTIFY_ACK (with reset_id) */
+	ipc_send_mng_msg(dev, MNG_RESET_NOTIFY_ACK, &reset_id,
+			 sizeof(uint32_t));
+
+	/* Wait for ISH FW'es ILUP and ISHTP_READY */
+	timed_wait_for_timeout(dev, WAIT_FOR_FW_RDY,
+			TIME_SLICE_FOR_FW_RDY_MS, TIMEOUT_FOR_FW_RDY_MS);
+	if (!ishtp_fw_is_ready(dev)) {
+		/* ISH FW is dead */
+		uint32_t	ish_status;
+
+		ish_status = _ish_read_fw_sts_reg(dev);
+		dev_err(dev->devc,
+			"[ishtp-ish]: completed reset, ISH is dead (FWSTS = %08X)\n",
+			ish_status);
+		return -ENODEV;
+	}
+	return	0;
+}
+
+#define TIMEOUT_FOR_HW_RDY_MS			300
+
+/**
+ * ish_fw_reset_work_fn() - FW reset worker function
+ * @unused: not used
+ *
+ * Call ish_fw_reset_handler to complete FW reset
+ */
+static void fw_reset_work_fn(struct work_struct *unused)
+{
+	int	rv;
+
+	rv = ish_fw_reset_handler(ishtp_dev);
+	if (!rv) {
+		/* ISH is ILUP & ISHTP-ready. Restart ISHTP */
+		msleep_interruptible(TIMEOUT_FOR_HW_RDY_MS);
+		ishtp_dev->recvd_hw_ready = 1;
+		wake_up_interruptible(&ishtp_dev->wait_hw_ready);
+
+		/* ISHTP notification in IPC_RESET sequence completion */
+		ishtp_reset_compl_handler(ishtp_dev);
+	} else
+		dev_err(ishtp_dev->devc, "[ishtp-ish]: FW reset failed (%d)\n",
+			rv);
+}
+
+/**
+ * _ish_sync_fw_clock() -Sync FW clock with the OS clock
+ * @dev: ishtp device pointer
+ *
+ * Sync FW and OS time
+ */
+static void _ish_sync_fw_clock(struct ishtp_device *dev)
+{
+	static unsigned long	prev_sync;
+	uint64_t	usec;
+
+	if (prev_sync && jiffies - prev_sync < 20 * HZ)
+		return;
+
+	prev_sync = jiffies;
+	usec = ktime_to_us(ktime_get_boottime());
+	ipc_send_mng_msg(dev, MNG_SYNC_FW_CLOCK, &usec, sizeof(uint64_t));
+}
+
+/**
+ * recv_ipc() - Receive and process IPC management messages
+ * @dev: ishtp device instance
+ * @doorbell_val: doorbell value
+ *
+ * This function runs in ISR context.
+ * NOTE: Any other mng command than reset_notify and reset_notify_ack
+ * won't wake BH handler
+ */
+static void	recv_ipc(struct ishtp_device *dev, uint32_t doorbell_val)
+{
+	uint32_t	mng_cmd;
+
+	mng_cmd = IPC_HEADER_GET_MNG_CMD(doorbell_val);
+
+	switch (mng_cmd) {
+	default:
+		break;
+
+	case MNG_RX_CMPL_INDICATION:
+		if (dev->suspend_flag) {
+			dev->suspend_flag = 0;
+			wake_up_interruptible(&dev->suspend_wait);
+		}
+		if (dev->resume_flag) {
+			dev->resume_flag = 0;
+			wake_up_interruptible(&dev->resume_wait);
+		}
+
+		write_ipc_from_queue(dev);
+		break;
+
+	case MNG_RESET_NOTIFY:
+		if (!ishtp_dev) {
+			ishtp_dev = dev;
+			INIT_WORK(&fw_reset_work, fw_reset_work_fn);
+		}
+		schedule_work(&fw_reset_work);
+		break;
+
+	case MNG_RESET_NOTIFY_ACK:
+		dev->recvd_hw_ready = 1;
+		wake_up_interruptible(&dev->wait_hw_ready);
+		break;
+	}
+}
+
+/**
+ * ish_irq_handler() - ISH IRQ handler
+ * @irq: irq number
+ * @dev_id: ishtp device pointer
+ *
+ * ISH IRQ handler. If interrupt is generated and is for ISH it will process
+ * the interrupt.
+ */
+irqreturn_t ish_irq_handler(int irq, void *dev_id)
+{
+	struct ishtp_device	*dev = dev_id;
+	uint32_t	doorbell_val;
+	bool	interrupt_generated;
+
+	/* Check that it's interrupt from ISH (may be shared) */
+	interrupt_generated = check_generated_interrupt(dev);
+
+	if (!interrupt_generated)
+		return IRQ_NONE;
+
+	doorbell_val = ish_reg_read(dev, IPC_REG_ISH2HOST_DRBL);
+	if (!IPC_IS_BUSY(doorbell_val))
+		return IRQ_HANDLED;
+
+	if (dev->dev_state == ISHTP_DEV_DISABLED)
+		return	IRQ_HANDLED;
+
+	/* Sanity check: IPC dgram length in header */
+	if (IPC_HEADER_GET_LENGTH(doorbell_val) > IPC_PAYLOAD_SIZE) {
+		dev_err(dev->devc,
+			"IPC hdr - bad length: %u; dropped\n",
+			(unsigned int)IPC_HEADER_GET_LENGTH(doorbell_val));
+		goto	eoi;
+	}
+
+	switch (IPC_HEADER_GET_PROTOCOL(doorbell_val)) {
+	default:
+		break;
+	case IPC_PROTOCOL_MNG:
+		recv_ipc(dev, doorbell_val);
+		break;
+	case IPC_PROTOCOL_ISHTP:
+		ishtp_recv(dev);
+		break;
+	}
+
+eoi:
+	/* Update IPC counters */
+	++dev->ipc_rx_cnt;
+	dev->ipc_rx_bytes_cnt += IPC_HEADER_GET_LENGTH(doorbell_val);
+
+	ish_reg_write(dev, IPC_REG_ISH2HOST_DRBL, 0);
+	/* Flush write to doorbell */
+	ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+
+	return	IRQ_HANDLED;
+}
+
+/**
+ * ish_disable_dma() - disable dma communication between host and ISHFW
+ * @dev: ishtp device pointer
+ *
+ * Clear the dma enable bit and wait for dma inactive.
+ *
+ * Return: 0 for success else error code.
+ */
+int ish_disable_dma(struct ishtp_device *dev)
+{
+	unsigned int	dma_delay;
+
+	/* Clear the dma enable bit */
+	ish_reg_write(dev, IPC_REG_ISH_RMP2, 0);
+
+	/* wait for dma inactive */
+	for (dma_delay = 0; dma_delay < MAX_DMA_DELAY &&
+		_ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA);
+		dma_delay += 5)
+		mdelay(5);
+
+	if (dma_delay >= MAX_DMA_DELAY) {
+		dev_err(dev->devc,
+			"Wait for DMA inactive timeout\n");
+		return	-EBUSY;
+	}
+
+	return 0;
+}
+
+/**
+ * ish_wakeup() - wakeup ishfw from waiting-for-host state
+ * @dev: ishtp device pointer
+ *
+ * Set the dma enable bit and send a void message to FW,
+ * it wil wakeup FW from waiting-for-host state.
+ */
+static void ish_wakeup(struct ishtp_device *dev)
+{
+	/* Set dma enable bit */
+	ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED);
+
+	/*
+	 * Send 0 IPC message so that ISH FW wakes up if it was already
+	 * asleep.
+	 */
+	ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT);
+
+	/* Flush writes to doorbell and REMAP2 */
+	ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+}
+
+/**
+ * _ish_hw_reset() - HW reset
+ * @dev: ishtp device pointer
+ *
+ * Reset ISH HW to recover if any error
+ *
+ * Return: 0 for success else error fault code
+ */
+static int _ish_hw_reset(struct ishtp_device *dev)
+{
+	struct pci_dev *pdev = dev->pdev;
+	int	rv;
+	uint16_t csr;
+
+	if (!pdev)
+		return	-ENODEV;
+
+	rv = pci_reset_function(pdev);
+	if (!rv)
+		dev->dev_state = ISHTP_DEV_RESETTING;
+
+	if (!pdev->pm_cap) {
+		dev_err(&pdev->dev, "Can't reset - no PM caps\n");
+		return	-EINVAL;
+	}
+
+	/* Disable dma communication between FW and host */
+	if (ish_disable_dma(dev)) {
+		dev_err(&pdev->dev,
+			"Can't reset - stuck with DMA in-progress\n");
+		return	-EBUSY;
+	}
+
+	pci_read_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, &csr);
+
+	csr &= ~PCI_PM_CTRL_STATE_MASK;
+	csr |= PCI_D3hot;
+	pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr);
+
+	mdelay(pdev->d3hot_delay);
+
+	csr &= ~PCI_PM_CTRL_STATE_MASK;
+	csr |= PCI_D0;
+	pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr);
+
+	/* Now we can enable ISH DMA operation and wakeup ISHFW */
+	ish_wakeup(dev);
+
+	return	0;
+}
+
+/**
+ * _ish_ipc_reset() - IPC reset
+ * @dev: ishtp device pointer
+ *
+ * Resets host and fw IPC and upper layers
+ *
+ * Return: 0 for success else error fault code
+ */
+static int _ish_ipc_reset(struct ishtp_device *dev)
+{
+	struct ipc_rst_payload_type ipc_mng_msg;
+	int	rv = 0;
+
+	ipc_mng_msg.reset_id = 1;
+	ipc_mng_msg.reserved = 0;
+
+	set_host_ready(dev);
+
+	/* Clear the incoming doorbell */
+	ish_reg_write(dev, IPC_REG_ISH2HOST_DRBL, 0);
+	/* Flush write to doorbell */
+	ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS);
+
+	dev->recvd_hw_ready = 0;
+
+	/* send message */
+	rv = ipc_send_mng_msg(dev, MNG_RESET_NOTIFY, &ipc_mng_msg,
+		sizeof(struct ipc_rst_payload_type));
+	if (rv) {
+		dev_err(dev->devc, "Failed to send IPC MNG_RESET_NOTIFY\n");
+		return	rv;
+	}
+
+	wait_event_interruptible_timeout(dev->wait_hw_ready,
+					 dev->recvd_hw_ready, 2 * HZ);
+	if (!dev->recvd_hw_ready) {
+		dev_err(dev->devc, "Timed out waiting for HW ready\n");
+		rv = -ENODEV;
+	}
+
+	return rv;
+}
+
+/**
+ * ish_hw_start() -Start ISH HW
+ * @dev: ishtp device pointer
+ *
+ * Set host to ready state and wait for FW reset
+ *
+ * Return: 0 for success else error fault code
+ */
+int ish_hw_start(struct ishtp_device *dev)
+{
+	ish_set_host_rdy(dev);
+
+	set_host_ready(dev);
+
+	/* After that we can enable ISH DMA operation and wakeup ISHFW */
+	ish_wakeup(dev);
+
+	/* wait for FW-initiated reset flow */
+	if (!dev->recvd_hw_ready)
+		wait_event_interruptible_timeout(dev->wait_hw_ready,
+						 dev->recvd_hw_ready,
+						 10 * HZ);
+
+	if (!dev->recvd_hw_ready) {
+		dev_err(dev->devc,
+			"[ishtp-ish]: Timed out waiting for FW-initiated reset\n");
+		return	-ENODEV;
+	}
+
+	return 0;
+}
+
+/**
+ * ish_ipc_get_header() -Get doorbell value
+ * @dev: ishtp device pointer
+ * @length: length of message
+ * @busy: busy status
+ *
+ * Get door bell value from message header
+ *
+ * Return: door bell value
+ */
+static uint32_t ish_ipc_get_header(struct ishtp_device *dev, int length,
+				   int busy)
+{
+	uint32_t drbl_val;
+
+	drbl_val = IPC_BUILD_HEADER(length, IPC_PROTOCOL_ISHTP, busy);
+
+	return drbl_val;
+}
+
+static const struct ishtp_hw_ops ish_hw_ops = {
+	.hw_reset = _ish_hw_reset,
+	.ipc_reset = _ish_ipc_reset,
+	.ipc_get_header = ish_ipc_get_header,
+	.ishtp_read = _ishtp_read,
+	.write = write_ipc_to_queue,
+	.get_fw_status = _ish_read_fw_sts_reg,
+	.sync_fw_clock = _ish_sync_fw_clock,
+	.ishtp_read_hdr = _ishtp_read_hdr
+};
+
+/**
+ * ish_dev_init() -Initialize ISH devoce
+ * @pdev: PCI device
+ *
+ * Allocate ISHTP device and initialize IPC processing
+ *
+ * Return: ISHTP device instance on success else NULL
+ */
+struct ishtp_device *ish_dev_init(struct pci_dev *pdev)
+{
+	struct ishtp_device *dev;
+	int	i;
+
+	dev = devm_kzalloc(&pdev->dev,
+			   sizeof(struct ishtp_device) + sizeof(struct ish_hw),
+			   GFP_KERNEL);
+	if (!dev)
+		return NULL;
+
+	ishtp_device_init(dev);
+
+	init_waitqueue_head(&dev->wait_hw_ready);
+
+	spin_lock_init(&dev->wr_processing_spinlock);
+
+	/* Init IPC processing and free lists */
+	INIT_LIST_HEAD(&dev->wr_processing_list);
+	INIT_LIST_HEAD(&dev->wr_free_list);
+	for (i = 0; i < IPC_TX_FIFO_SIZE; i++) {
+		struct wr_msg_ctl_info	*tx_buf;
+
+		tx_buf = devm_kzalloc(&pdev->dev,
+				      sizeof(struct wr_msg_ctl_info),
+				      GFP_KERNEL);
+		if (!tx_buf) {
+			/*
+			 * IPC buffers may be limited or not available
+			 * at all - although this shouldn't happen
+			 */
+			dev_err(dev->devc,
+				"[ishtp-ish]: failure in Tx FIFO allocations (%d)\n",
+				i);
+			break;
+		}
+		list_add_tail(&tx_buf->link, &dev->wr_free_list);
+	}
+
+	dev->ops = &ish_hw_ops;
+	dev->devc = &pdev->dev;
+	dev->mtu = IPC_PAYLOAD_SIZE - sizeof(struct ishtp_msg_hdr);
+	return dev;
+}
+
+/**
+ * ish_device_disable() - Disable ISH device
+ * @dev: ISHTP device pointer
+ *
+ * Disable ISH by clearing host ready to inform firmware.
+ */
+void	ish_device_disable(struct ishtp_device *dev)
+{
+	struct pci_dev *pdev = dev->pdev;
+
+	if (!pdev)
+		return;
+
+	/* Disable dma communication between FW and host */
+	if (ish_disable_dma(dev)) {
+		dev_err(&pdev->dev,
+			"Can't reset - stuck with DMA in-progress\n");
+		return;
+	}
+
+	/* Put ISH to D3hot state for power saving */
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	dev->dev_state = ISHTP_DEV_DISABLED;
+	ish_clr_host_rdy(dev);
+}
diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
new file mode 100644
index 000000000..c6d48a864
--- /dev/null
+++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PCI glue for ISHTP provider device (ISH) driver
+ *
+ * Copyright (c) 2014-2016, Intel Corporation.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/intel_ish.h>
+#include "ishtp-dev.h"
+#include "hw-ish.h"
+
+static const struct pci_device_id ish_pci_tbl[] = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CHV_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Ax_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, BXT_Bx_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, APL_Ax_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, SPT_Ax_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CNL_Ax_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, GLK_Ax_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CNL_H_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, ICL_MOBILE_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, SPT_H_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CML_LP_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, CMP_H_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, EHL_Ax_DEVICE_ID)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, TGL_LP_DEVICE_ID)},
+	{0, }
+};
+MODULE_DEVICE_TABLE(pci, ish_pci_tbl);
+
+/**
+ * ish_event_tracer() - Callback function to dump trace messages
+ * @dev:	ishtp device
+ * @format:	printf style format
+ *
+ * Callback to direct log messages to Linux trace buffers
+ */
+static __printf(2, 3)
+void ish_event_tracer(struct ishtp_device *dev, const char *format, ...)
+{
+	if (trace_ishtp_dump_enabled()) {
+		va_list args;
+		char tmp_buf[100];
+
+		va_start(args, format);
+		vsnprintf(tmp_buf, sizeof(tmp_buf), format, args);
+		va_end(args);
+
+		trace_ishtp_dump(tmp_buf);
+	}
+}
+
+/**
+ * ish_init() - Init function
+ * @dev:	ishtp device
+ *
+ * This function initialize wait queues for suspend/resume and call
+ * calls hadware initialization function. This will initiate
+ * startup sequence
+ *
+ * Return: 0 for success or error code for failure
+ */
+static int ish_init(struct ishtp_device *dev)
+{
+	int ret;
+
+	/* Set the state of ISH HW to start */
+	ret = ish_hw_start(dev);
+	if (ret) {
+		dev_err(dev->devc, "ISH: hw start failed.\n");
+		return ret;
+	}
+
+	/* Start the inter process communication to ISH processor */
+	ret = ishtp_start(dev);
+	if (ret) {
+		dev_err(dev->devc, "ISHTP: Protocol init failed.\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct pci_device_id ish_invalid_pci_ids[] = {
+	/* Mehlow platform special pci ids */
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xA309)},
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xA30A)},
+	{}
+};
+
+static inline bool ish_should_enter_d0i3(struct pci_dev *pdev)
+{
+	return !pm_suspend_via_firmware() || pdev->device == CHV_DEVICE_ID;
+}
+
+static inline bool ish_should_leave_d0i3(struct pci_dev *pdev)
+{
+	return !pm_resume_via_firmware() || pdev->device == CHV_DEVICE_ID;
+}
+
+/**
+ * ish_probe() - PCI driver probe callback
+ * @pdev:	pci device
+ * @ent:	pci device id
+ *
+ * Initialize PCI function, setup interrupt and call for ISH initialization
+ *
+ * Return: 0 for success or error code for failure
+ */
+static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int ret;
+	struct ish_hw *hw;
+	unsigned long irq_flag = 0;
+	struct ishtp_device *ishtp;
+	struct device *dev = &pdev->dev;
+
+	/* Check for invalid platforms for ISH support */
+	if (pci_dev_present(ish_invalid_pci_ids))
+		return -ENODEV;
+
+	/* enable pci dev */
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(dev, "ISH: Failed to enable PCI device\n");
+		return ret;
+	}
+
+	/* set PCI host mastering */
+	pci_set_master(pdev);
+
+	/* pci request regions for ISH driver */
+	ret = pcim_iomap_regions(pdev, 1 << 0, KBUILD_MODNAME);
+	if (ret) {
+		dev_err(dev, "ISH: Failed to get PCI regions\n");
+		return ret;
+	}
+
+	/* allocates and initializes the ISH dev structure */
+	ishtp = ish_dev_init(pdev);
+	if (!ishtp) {
+		ret = -ENOMEM;
+		return ret;
+	}
+	hw = to_ish_hw(ishtp);
+	ishtp->print_log = ish_event_tracer;
+
+	/* mapping IO device memory */
+	hw->mem_addr = pcim_iomap_table(pdev)[0];
+	ishtp->pdev = pdev;
+
+	/* request and enable interrupt */
+	ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
+	if (!pdev->msi_enabled && !pdev->msix_enabled)
+		irq_flag = IRQF_SHARED;
+
+	ret = devm_request_irq(dev, pdev->irq, ish_irq_handler,
+			       irq_flag, KBUILD_MODNAME, ishtp);
+	if (ret) {
+		dev_err(dev, "ISH: request IRQ %d failed\n", pdev->irq);
+		return ret;
+	}
+
+	dev_set_drvdata(ishtp->devc, ishtp);
+
+	init_waitqueue_head(&ishtp->suspend_wait);
+	init_waitqueue_head(&ishtp->resume_wait);
+
+	ret = ish_init(ishtp);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+/**
+ * ish_remove() - PCI driver remove callback
+ * @pdev:	pci device
+ *
+ * This function does cleanup of ISH on pci remove callback
+ */
+static void ish_remove(struct pci_dev *pdev)
+{
+	struct ishtp_device *ishtp_dev = pci_get_drvdata(pdev);
+
+	ishtp_bus_remove_all_clients(ishtp_dev, false);
+	ish_device_disable(ishtp_dev);
+}
+
+static struct device __maybe_unused *ish_resume_device;
+
+/* 50ms to get resume response */
+#define WAIT_FOR_RESUME_ACK_MS		50
+
+/**
+ * ish_resume_handler() - Work function to complete resume
+ * @work:	work struct
+ *
+ * The resume work function to complete resume function asynchronously.
+ * There are two resume paths, one where ISH is not powered off,
+ * in that case a simple resume message is enough, others we need
+ * a reset sequence.
+ */
+static void __maybe_unused ish_resume_handler(struct work_struct *work)
+{
+	struct pci_dev *pdev = to_pci_dev(ish_resume_device);
+	struct ishtp_device *dev = pci_get_drvdata(pdev);
+	int ret;
+
+	if (ish_should_leave_d0i3(pdev) && !dev->suspend_flag) {
+		disable_irq_wake(pdev->irq);
+
+		ishtp_send_resume(dev);
+
+		/* Waiting to get resume response */
+		if (dev->resume_flag)
+			ret = wait_event_interruptible_timeout(dev->resume_wait,
+				!dev->resume_flag,
+				msecs_to_jiffies(WAIT_FOR_RESUME_ACK_MS));
+
+		/*
+		 * If the flag is not cleared, something is wrong with ISH FW.
+		 * So on resume, need to go through init sequence again.
+		 */
+		if (dev->resume_flag)
+			ish_init(dev);
+	} else {
+		/*
+		 * Resume from the D3, full reboot of ISH processor will happen,
+		 * so need to go through init sequence again.
+		 */
+		ish_init(dev);
+	}
+}
+
+/**
+ * ish_suspend() - ISH suspend callback
+ * @device:	device pointer
+ *
+ * ISH suspend callback
+ *
+ * Return: 0 to the pm core
+ */
+static int __maybe_unused ish_suspend(struct device *device)
+{
+	struct pci_dev *pdev = to_pci_dev(device);
+	struct ishtp_device *dev = pci_get_drvdata(pdev);
+
+	if (ish_should_enter_d0i3(pdev)) {
+		/*
+		 * If previous suspend hasn't been asnwered then ISH is likely
+		 * dead, don't attempt nested notification
+		 */
+		if (dev->suspend_flag)
+			return	0;
+
+		dev->resume_flag = 0;
+		dev->suspend_flag = 1;
+		ishtp_send_suspend(dev);
+
+		/* 25 ms should be enough for live ISH to flush all IPC buf */
+		if (dev->suspend_flag)
+			wait_event_interruptible_timeout(dev->suspend_wait,
+					!dev->suspend_flag,
+					msecs_to_jiffies(25));
+
+		if (dev->suspend_flag) {
+			/*
+			 * It looks like FW halt, clear the DMA bit, and put
+			 * ISH into D3, and FW would reset on resume.
+			 */
+			ish_disable_dma(dev);
+		} else {
+			/*
+			 * Save state so PCI core will keep the device at D0,
+			 * the ISH would enter D0i3
+			 */
+			pci_save_state(pdev);
+
+			enable_irq_wake(pdev->irq);
+		}
+	} else {
+		/*
+		 * Clear the DMA bit before putting ISH into D3,
+		 * or ISH FW would reset automatically.
+		 */
+		ish_disable_dma(dev);
+	}
+
+	return 0;
+}
+
+static __maybe_unused DECLARE_WORK(resume_work, ish_resume_handler);
+/**
+ * ish_resume() - ISH resume callback
+ * @device:	device pointer
+ *
+ * ISH resume callback
+ *
+ * Return: 0 to the pm core
+ */
+static int __maybe_unused ish_resume(struct device *device)
+{
+	struct pci_dev *pdev = to_pci_dev(device);
+	struct ishtp_device *dev = pci_get_drvdata(pdev);
+
+	ish_resume_device = device;
+	dev->resume_flag = 1;
+
+	schedule_work(&resume_work);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ish_pm_ops, ish_suspend, ish_resume);
+
+static struct pci_driver ish_driver = {
+	.name = KBUILD_MODNAME,
+	.id_table = ish_pci_tbl,
+	.probe = ish_probe,
+	.remove = ish_remove,
+	.driver.pm = &ish_pm_ops,
+};
+
+module_pci_driver(ish_driver);
+
+/* Original author */
+MODULE_AUTHOR("Daniel Drubin <daniel.drubin@intel.com>");
+/* Adoption to upstream Linux kernel */
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+
+MODULE_DESCRIPTION("Intel(R) Integrated Sensor Hub PCI Device Driver");
+MODULE_LICENSE("GPL");