Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 164 insertions, 0 deletions

diff --git a/drivers/hsi/controllers/omap_ssi.h b/drivers/hsi/controllers/omap_ssi.h
new file mode 100644
index 000000000..c72f74b5b
--- /dev/null
+++ b/drivers/hsi/controllers/omap_ssi.h
@@ -0,0 +1,164 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* OMAP SSI internal interface.
+ *
+ * Copyright (C) 2010 Nokia Corporation. All rights reserved.
+ * Copyright (C) 2013 Sebastian Reichel
+ *
+ * Contact: Carlos Chinea <carlos.chinea@nokia.com>
+ */
+
+#ifndef __LINUX_HSI_OMAP_SSI_H__
+#define __LINUX_HSI_OMAP_SSI_H__
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/hsi/hsi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define SSI_MAX_CHANNELS	8
+#define SSI_MAX_GDD_LCH		8
+#define SSI_BYTES_TO_FRAMES(x) ((((x) - 1) >> 2) + 1)
+
+#define SSI_WAKE_EN 0
+
+/**
+ * struct omap_ssm_ctx - OMAP synchronous serial module (TX/RX) context
+ * @mode: Bit transmission mode
+ * @channels: Number of channels
+ * @framesize: Frame size in bits
+ * @timeout: RX frame timeout
+ * @divisor: TX divider
+ * @arb_mode: Arbitration mode for TX frame (Round robin, priority)
+ */
+struct omap_ssm_ctx {
+	u32	mode;
+	u32	channels;
+	u32	frame_size;
+	union	{
+			u32	timeout; /* Rx Only */
+			struct	{
+					u32	arb_mode;
+					u32	divisor;
+			}; /* Tx only */
+	};
+};
+
+/**
+ * struct omap_ssi_port - OMAP SSI port data
+ * @dev: device associated to the port (HSI port)
+ * @pdev: platform device associated to the port
+ * @sst_dma: SSI transmitter physical base address
+ * @ssr_dma: SSI receiver physical base address
+ * @sst_base: SSI transmitter base address
+ * @ssr_base: SSI receiver base address
+ * @wk_lock: spin lock to serialize access to the wake lines
+ * @lock: Spin lock to serialize access to the SSI port
+ * @channels: Current number of channels configured (1,2,4 or 8)
+ * @txqueue: TX message queues
+ * @rxqueue: RX message queues
+ * @brkqueue: Queue of incoming HWBREAK requests (FRAME mode)
+ * @errqueue: Queue for failed messages
+ * @errqueue_work: Delayed Work for failed messages
+ * @irq: IRQ number
+ * @wake_irq: IRQ number for incoming wake line (-1 if none)
+ * @wake_gpio: GPIO number for incoming wake line (-1 if none)
+ * @flags: flags to keep track of states
+ * @wk_refcount: Reference count for output wake line
+ * @work: worker for starting TX
+ * @sys_mpu_enable: Context for the interrupt enable register for irq 0
+ * @sst: Context for the synchronous serial transmitter
+ * @ssr: Context for the synchronous serial receiver
+ */
+struct omap_ssi_port {
+	struct device		*dev;
+	struct device           *pdev;
+	dma_addr_t		sst_dma;
+	dma_addr_t		ssr_dma;
+	void __iomem		*sst_base;
+	void __iomem		*ssr_base;
+	spinlock_t		wk_lock;
+	spinlock_t		lock;
+	unsigned int		channels;
+	struct list_head	txqueue[SSI_MAX_CHANNELS];
+	struct list_head	rxqueue[SSI_MAX_CHANNELS];
+	struct list_head	brkqueue;
+	struct list_head	errqueue;
+	struct delayed_work	errqueue_work;
+	unsigned int		irq;
+	int			wake_irq;
+	struct gpio_desc	*wake_gpio;
+	bool			wktest:1; /* FIXME: HACK to be removed */
+	unsigned long		flags;
+	unsigned int		wk_refcount;
+	struct work_struct	work;
+	/* OMAP SSI port context */
+	u32			sys_mpu_enable; /* We use only one irq */
+	struct omap_ssm_ctx	sst;
+	struct omap_ssm_ctx	ssr;
+	u32			loss_count;
+	u32			port_id;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *dir;
+#endif
+};
+
+/**
+ * struct gdd_trn - GDD transaction data
+ * @msg: Pointer to the HSI message being served
+ * @sg: Pointer to the current sg entry being served
+ */
+struct gdd_trn {
+	struct hsi_msg		*msg;
+	struct scatterlist	*sg;
+};
+
+/**
+ * struct omap_ssi_controller - OMAP SSI controller data
+ * @dev: device associated to the controller (HSI controller)
+ * @sys: SSI I/O base address
+ * @gdd: GDD I/O base address
+ * @fck: SSI functional clock
+ * @gdd_irq: IRQ line for GDD
+ * @gdd_tasklet: bottom half for DMA transfers
+ * @gdd_trn: Array of GDD transaction data for ongoing GDD transfers
+ * @lock: lock to serialize access to GDD
+ * @fck_nb: DVFS notfifier block
+ * @fck_rate: clock rate
+ * @loss_count: To follow if we need to restore context or not
+ * @max_speed: Maximum TX speed (Kb/s) set by the clients.
+ * @gdd_gcr: SSI GDD saved context
+ * @get_loss: Pointer to omap_pm_get_dev_context_loss_count, if any
+ * @port: Array of pointers of the ports of the controller
+ * @dir: Debugfs SSI root directory
+ */
+struct omap_ssi_controller {
+	struct device		*dev;
+	void __iomem		*sys;
+	void __iomem		*gdd;
+	struct clk		*fck;
+	unsigned int		gdd_irq;
+	struct tasklet_struct	gdd_tasklet;
+	struct gdd_trn		gdd_trn[SSI_MAX_GDD_LCH];
+	spinlock_t		lock;
+	struct notifier_block	fck_nb;
+	unsigned long		fck_rate;
+	u32			loss_count;
+	u32			max_speed;
+	/* OMAP SSI Controller context */
+	u32			gdd_gcr;
+	int			(*get_loss)(struct device *dev);
+	struct omap_ssi_port	**port;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *dir;
+#endif
+};
+
+void omap_ssi_port_update_fclk(struct hsi_controller *ssi,
+			       struct omap_ssi_port *omap_port);
+
+extern struct platform_driver ssi_port_pdriver;
+
+#endif /* __LINUX_HSI_OMAP_SSI_H__ */