Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 238 insertions, 0 deletions

diff --git a/drivers/ide/buddha.c b/drivers/ide/buddha.c
new file mode 100644
index 000000000..46eaf58d8
--- /dev/null
+++ b/drivers/ide/buddha.c
@@ -0,0 +1,238 @@
+/*
+ *  Amiga Buddha, Catweasel and X-Surf IDE Driver
+ *
+ *	Copyright (C) 1997, 2001 by Geert Uytterhoeven and others
+ *
+ *  This driver was written based on the specifications in README.buddha and
+ *  the X-Surf info from Inside_XSurf.txt available at
+ *  http://www.jschoenfeld.com
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive for
+ *  more details.
+ *
+ *  TODO:
+ *    - test it :-)
+ *    - tune the timings using the speed-register
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/zorro.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/amigahw.h>
+#include <asm/amigaints.h>
+
+
+    /*
+     *  The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
+     */
+
+#define BUDDHA_NUM_HWIFS	2
+#define CATWEASEL_NUM_HWIFS	3
+#define XSURF_NUM_HWIFS         2
+
+#define MAX_NUM_HWIFS		3
+
+    /*
+     *  Bases of the IDE interfaces (relative to the board address)
+     */
+
+#define BUDDHA_BASE1	0x800
+#define BUDDHA_BASE2	0xa00
+#define BUDDHA_BASE3	0xc00
+
+#define XSURF_BASE1     0xb000 /* 2.5" Interface */
+#define XSURF_BASE2     0xd000 /* 3.5" Interface */
+
+static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = {
+    BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
+};
+
+static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
+     XSURF_BASE1, XSURF_BASE2
+};
+
+    /*
+     *  Offsets from one of the above bases
+     */
+
+#define BUDDHA_CONTROL	0x11a
+
+    /*
+     *  Other registers
+     */
+
+#define BUDDHA_IRQ1	0xf00		/* MSB = 1, Harddisk is source of */
+#define BUDDHA_IRQ2	0xf40		/* interrupt */
+#define BUDDHA_IRQ3	0xf80
+
+#define XSURF_IRQ1      0x7e
+#define XSURF_IRQ2      0x7e
+
+static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = {
+    BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3
+};
+
+static int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = {
+    XSURF_IRQ1, XSURF_IRQ2
+};
+
+#define BUDDHA_IRQ_MR	0xfc0		/* master interrupt enable */
+
+
+    /*
+     *  Board information
+     */
+
+typedef enum BuddhaType_Enum {
+    BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF
+} BuddhaType;
+
+static const char *buddha_board_name[] = { "Buddha", "Catweasel", "X-Surf" };
+
+    /*
+     *  Check and acknowledge the interrupt status
+     */
+
+static int buddha_test_irq(ide_hwif_t *hwif)
+{
+    unsigned char ch;
+
+    ch = z_readb(hwif->io_ports.irq_addr);
+    if (!(ch & 0x80))
+	    return 0;
+    return 1;
+}
+
+static void xsurf_clear_irq(ide_drive_t *drive)
+{
+    /*
+     * X-Surf needs 0 written to IRQ register to ensure ISA bit A11 stays at 0
+     */
+    z_writeb(0, drive->hwif->io_ports.irq_addr);
+}
+
+static void __init buddha_setup_ports(struct ide_hw *hw, unsigned long base,
+				      unsigned long ctl, unsigned long irq_port)
+{
+	int i;
+
+	memset(hw, 0, sizeof(*hw));
+
+	hw->io_ports.data_addr = base;
+
+	for (i = 1; i < 8; i++)
+		hw->io_ports_array[i] = base + 2 + i * 4;
+
+	hw->io_ports.ctl_addr = ctl;
+	hw->io_ports.irq_addr = irq_port;
+
+	hw->irq = IRQ_AMIGA_PORTS;
+}
+
+static const struct ide_port_ops buddha_port_ops = {
+	.test_irq		= buddha_test_irq,
+};
+
+static const struct ide_port_ops xsurf_port_ops = {
+	.clear_irq		= xsurf_clear_irq,
+	.test_irq		= buddha_test_irq,
+};
+
+static const struct ide_port_info buddha_port_info = {
+	.port_ops		= &buddha_port_ops,
+	.host_flags		= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA,
+	.irq_flags		= IRQF_SHARED,
+	.chipset		= ide_generic,
+};
+
+    /*
+     *  Probe for a Buddha or Catweasel IDE interface
+     */
+
+static int __init buddha_init(void)
+{
+	struct zorro_dev *z = NULL;
+	u_long buddha_board = 0;
+	BuddhaType type;
+	int buddha_num_hwifs, i;
+
+	while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
+		unsigned long board;
+		struct ide_hw hw[MAX_NUM_HWIFS], *hws[MAX_NUM_HWIFS];
+		struct ide_port_info d = buddha_port_info;
+
+		if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
+			buddha_num_hwifs = BUDDHA_NUM_HWIFS;
+			type=BOARD_BUDDHA;
+		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
+			buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
+			type=BOARD_CATWEASEL;
+		} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
+			buddha_num_hwifs = XSURF_NUM_HWIFS;
+			type=BOARD_XSURF;
+			d.port_ops = &xsurf_port_ops;
+		} else 
+			continue;
+		
+		board = z->resource.start;
+
+		if(type != BOARD_XSURF) {
+			if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
+				continue;
+		} else {
+			if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE"))
+				continue;
+			if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE"))
+				goto fail_base2;
+			if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE")) {
+				release_mem_region(board+XSURF_BASE2, 0x1000);
+fail_base2:
+				release_mem_region(board+XSURF_BASE1, 0x1000);
+				continue;
+			}
+		}	  
+		buddha_board = (unsigned long)ZTWO_VADDR(board);
+		
+		/* write to BUDDHA_IRQ_MR to enable the board IRQ */
+		/* X-Surf doesn't have this.  IRQs are always on */
+		if (type != BOARD_XSURF)
+			z_writeb(0, buddha_board+BUDDHA_IRQ_MR);
+
+		printk(KERN_INFO "ide: %s IDE controller\n",
+				 buddha_board_name[type]);
+
+		for (i = 0; i < buddha_num_hwifs; i++) {
+			unsigned long base, ctl, irq_port;
+
+			if (type != BOARD_XSURF) {
+				base = buddha_board + buddha_bases[i];
+				ctl = base + BUDDHA_CONTROL;
+				irq_port = buddha_board + buddha_irqports[i];
+			} else {
+				base = buddha_board + xsurf_bases[i];
+				/* X-Surf has no CS1* (Control/AltStat) */
+				ctl = 0;
+				irq_port = buddha_board + xsurf_irqports[i];
+			}
+
+			buddha_setup_ports(&hw[i], base, ctl, irq_port);
+
+			hws[i] = &hw[i];
+		}
+
+		ide_host_add(&d, hws, i, NULL);
+	}
+
+	return 0;
+}
+
+module_init(buddha_init);
+
+MODULE_LICENSE("GPL");