Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 270 insertions, 0 deletions

diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c
new file mode 100644
index 000000000..17e6132b9
--- /dev/null
+++ b/drivers/ide/tc86c001.c
@@ -0,0 +1,270 @@
+/*
+ * Copyright (C) 2002 Toshiba Corporation
+ * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/module.h>
+
+#define DRV_NAME "tc86c001"
+
+static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+	unsigned long scr_port	= hwif->config_data + (drive->dn ? 0x02 : 0x00);
+	u16 mode, scr		= inw(scr_port);
+	const u8 speed		= drive->dma_mode;
+
+	switch (speed) {
+	case XFER_UDMA_4:	mode = 0x00c0; break;
+	case XFER_UDMA_3:	mode = 0x00b0; break;
+	case XFER_UDMA_2:	mode = 0x00a0; break;
+	case XFER_UDMA_1:	mode = 0x0090; break;
+	case XFER_UDMA_0:	mode = 0x0080; break;
+	case XFER_MW_DMA_2:	mode = 0x0070; break;
+	case XFER_MW_DMA_1:	mode = 0x0060; break;
+	case XFER_MW_DMA_0:	mode = 0x0050; break;
+	case XFER_PIO_4:	mode = 0x0400; break;
+	case XFER_PIO_3:	mode = 0x0300; break;
+	case XFER_PIO_2:	mode = 0x0200; break;
+	case XFER_PIO_1:	mode = 0x0100; break;
+	case XFER_PIO_0:
+	default:		mode = 0x0000; break;
+	}
+
+	scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
+	scr |= mode;
+	outw(scr, scr_port);
+}
+
+static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
+{
+	drive->dma_mode = drive->pio_mode;
+	tc86c001_set_mode(hwif, drive);
+}
+
+/*
+ * HACKITY HACK
+ *
+ * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
+ * if a DMA transfer terminates prematurely, the controller leaves the device's
+ * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
+ * set the interrupt bit in the DMA status register), thus no PCI interrupt
+ * will occur until a DMA transfer has been successfully completed.
+ *
+ * We work around this by initiating dummy, zero-length DMA transfer on
+ * a DMA timeout expiration. I found no better way to do this with the current
+ * IDE core than to temporarily replace a higher level driver's timer expiry
+ * handler with our own backing up to that handler in case our recovery fails.
+ */
+static int tc86c001_timer_expiry(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= drive->hwif;
+	ide_expiry_t *expiry	= ide_get_hwifdata(hwif);
+	u8 dma_stat		= inb(hwif->dma_base + ATA_DMA_STATUS);
+
+	/* Restore a higher level driver's expiry handler first. */
+	hwif->expiry = expiry;
+
+	if ((dma_stat & 5) == 1) {	/* DMA active and no interrupt */
+		unsigned long sc_base	= hwif->config_data;
+		unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
+		u8 dma_cmd		= inb(hwif->dma_base + ATA_DMA_CMD);
+
+		printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
+		       "attempting recovery...\n", drive->name);
+
+		/* Stop DMA */
+		outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
+
+		/* Setup the dummy DMA transfer */
+		outw(0, sc_base + 0x0a);	/* Sector Count */
+		outw(0, twcr_port);	/* Transfer Word Count 1 or 2 */
+
+		/* Start the dummy DMA transfer */
+
+		/* clear R_OR_WCTR for write */
+		outb(0x00, hwif->dma_base + ATA_DMA_CMD);
+		/* set START_STOPBM */
+		outb(0x01, hwif->dma_base + ATA_DMA_CMD);
+
+		/*
+		 * If an interrupt was pending, it should come thru shortly.
+		 * If not, a higher level driver's expiry handler should
+		 * eventually cause some kind of recovery from the DMA stall.
+		 */
+		return WAIT_MIN_SLEEP;
+	}
+
+	/* Chain to the restored expiry handler if DMA wasn't active. */
+	if (likely(expiry != NULL))
+		return expiry(drive);
+
+	/* If there was no handler, "emulate" that for ide_timer_expiry()... */
+	return -1;
+}
+
+static void tc86c001_dma_start(ide_drive_t *drive)
+{
+	ide_hwif_t *hwif	= drive->hwif;
+	unsigned long sc_base	= hwif->config_data;
+	unsigned long twcr_port	= sc_base + (drive->dn ? 0x06 : 0x04);
+	unsigned long nsectors	= blk_rq_sectors(hwif->rq);
+
+	/*
+	 * We have to manually load the sector count and size into
+	 * the appropriate system control registers for DMA to work
+	 * with LBA48 and ATAPI devices...
+	 */
+	outw(nsectors, sc_base + 0x0a);	/* Sector Count */
+	outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
+
+	/* Install our timeout expiry hook, saving the current handler... */
+	ide_set_hwifdata(hwif, hwif->expiry);
+	hwif->expiry = &tc86c001_timer_expiry;
+
+	ide_dma_start(drive);
+}
+
+static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	unsigned long sc_base = pci_resource_start(dev, 5);
+	u16 scr1 = inw(sc_base + 0x00);
+
+	/*
+	 * System Control  1 Register bit 13 (PDIAGN):
+	 * 0=80-pin cable, 1=40-pin cable
+	 */
+	return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
+static void init_hwif_tc86c001(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev	= to_pci_dev(hwif->dev);
+	unsigned long sc_base	= pci_resource_start(dev, 5);
+	u16 scr1		= inw(sc_base + 0x00);
+
+	/* System Control 1 Register bit 15 (Soft Reset) set */
+	outw(scr1 |  0x8000, sc_base + 0x00);
+
+	/* System Control 1 Register bit 14 (FIFO Reset) set */
+	outw(scr1 |  0x4000, sc_base + 0x00);
+
+	/* System Control 1 Register: reset clear */
+	outw(scr1 & ~0xc000, sc_base + 0x00);
+
+	/* Store the system control register base for convenience... */
+	hwif->config_data = sc_base;
+
+	if (!hwif->dma_base)
+		return;
+
+	/*
+	 * Sector Count Control Register bits 0 and 1 set:
+	 * software sets Sector Count Register for master and slave device
+	 */
+	outw(0x0003, sc_base + 0x0c);
+
+	/* Sector Count Register limit */
+	hwif->rqsize	 = 0xffff;
+}
+
+static const struct ide_port_ops tc86c001_port_ops = {
+	.set_pio_mode		= tc86c001_set_pio_mode,
+	.set_dma_mode		= tc86c001_set_mode,
+	.cable_detect		= tc86c001_cable_detect,
+};
+
+static const struct ide_dma_ops tc86c001_dma_ops = {
+	.dma_host_set		= ide_dma_host_set,
+	.dma_setup		= ide_dma_setup,
+	.dma_start		= tc86c001_dma_start,
+	.dma_end		= ide_dma_end,
+	.dma_test_irq		= ide_dma_test_irq,
+	.dma_lost_irq		= ide_dma_lost_irq,
+	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
+	.dma_sff_read_status	= ide_dma_sff_read_status,
+};
+
+static const struct ide_port_info tc86c001_chipset = {
+	.name		= DRV_NAME,
+	.init_hwif	= init_hwif_tc86c001,
+	.port_ops	= &tc86c001_port_ops,
+	.dma_ops	= &tc86c001_dma_ops,
+	.host_flags	= IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	.udma_mask	= ATA_UDMA4,
+};
+
+static int tc86c001_init_one(struct pci_dev *dev,
+			     const struct pci_device_id *id)
+{
+	int rc;
+
+	rc = pci_enable_device(dev);
+	if (rc)
+		goto out;
+
+	rc = pci_request_region(dev, 5, DRV_NAME);
+	if (rc) {
+		printk(KERN_ERR DRV_NAME ": system control regs already in use");
+		goto out_disable;
+	}
+
+	rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL);
+	if (rc)
+		goto out_release;
+
+	goto out;
+
+out_release:
+	pci_release_region(dev, 5);
+out_disable:
+	pci_disable_device(dev);
+out:
+	return rc;
+}
+
+static void tc86c001_remove(struct pci_dev *dev)
+{
+	ide_pci_remove(dev);
+	pci_release_region(dev, 5);
+	pci_disable_device(dev);
+}
+
+static const struct pci_device_id tc86c001_pci_tbl[] = {
+	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
+
+static struct pci_driver tc86c001_pci_driver = {
+	.name		= "TC86C001",
+	.id_table	= tc86c001_pci_tbl,
+	.probe		= tc86c001_init_one,
+	.remove		= tc86c001_remove,
+};
+
+static int __init tc86c001_ide_init(void)
+{
+	return ide_pci_register_driver(&tc86c001_pci_driver);
+}
+
+static void __exit tc86c001_ide_exit(void)
+{
+	pci_unregister_driver(&tc86c001_pci_driver);
+}
+
+module_init(tc86c001_ide_init);
+module_exit(tc86c001_ide_exit);
+
+MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
+MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
+MODULE_LICENSE("GPL");