Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 994 insertions, 0 deletions

diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
new file mode 100644
index 000000000..c10aa28be
--- /dev/null
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -0,0 +1,994 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018, 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/bitops.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include "qcom-vadc-common.h"
+
+#define ADC5_USR_REVISION1			0x0
+#define ADC5_USR_STATUS1			0x8
+#define ADC5_USR_STATUS1_CONV_FAULT		BIT(7)
+#define ADC5_USR_STATUS1_REQ_STS		BIT(1)
+#define ADC5_USR_STATUS1_EOC			BIT(0)
+#define ADC5_USR_STATUS1_REQ_STS_EOC_MASK	0x3
+
+#define ADC5_USR_STATUS2			0x9
+#define ADC5_USR_STATUS2_CONV_SEQ_MASK		0x70
+#define ADC5_USR_STATUS2_CONV_SEQ_MASK_SHIFT	0x5
+
+#define ADC5_USR_IBAT_MEAS			0xf
+#define ADC5_USR_IBAT_MEAS_SUPPORTED		BIT(0)
+
+#define ADC5_USR_DIG_PARAM			0x42
+#define ADC5_USR_DIG_PARAM_CAL_VAL		BIT(6)
+#define ADC5_USR_DIG_PARAM_CAL_VAL_SHIFT	6
+#define ADC5_USR_DIG_PARAM_CAL_SEL		0x30
+#define ADC5_USR_DIG_PARAM_CAL_SEL_SHIFT	4
+#define ADC5_USR_DIG_PARAM_DEC_RATIO_SEL	0xc
+#define ADC5_USR_DIG_PARAM_DEC_RATIO_SEL_SHIFT	2
+
+#define ADC5_USR_FAST_AVG_CTL			0x43
+#define ADC5_USR_FAST_AVG_CTL_EN		BIT(7)
+#define ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK	0x7
+
+#define ADC5_USR_CH_SEL_CTL			0x44
+
+#define ADC5_USR_DELAY_CTL			0x45
+#define ADC5_USR_HW_SETTLE_DELAY_MASK		0xf
+
+#define ADC5_USR_EN_CTL1			0x46
+#define ADC5_USR_EN_CTL1_ADC_EN			BIT(7)
+
+#define ADC5_USR_CONV_REQ			0x47
+#define ADC5_USR_CONV_REQ_REQ			BIT(7)
+
+#define ADC5_USR_DATA0				0x50
+
+#define ADC5_USR_DATA1				0x51
+
+#define ADC5_USR_IBAT_DATA0			0x52
+
+#define ADC5_USR_IBAT_DATA1			0x53
+
+#define ADC_CHANNEL_OFFSET			0x8
+#define ADC_CHANNEL_MASK			GENMASK(7, 0)
+
+/*
+ * Conversion time varies based on the decimation, clock rate, fast average
+ * samples and measurements queued across different VADC peripherals.
+ * Set the timeout to a max of 100ms.
+ */
+#define ADC5_CONV_TIME_MIN_US			263
+#define ADC5_CONV_TIME_MAX_US			264
+#define ADC5_CONV_TIME_RETRY			400
+#define ADC5_CONV_TIMEOUT			msecs_to_jiffies(100)
+
+/* Digital version >= 5.3 supports hw_settle_2 */
+#define ADC5_HW_SETTLE_DIFF_MINOR		3
+#define ADC5_HW_SETTLE_DIFF_MAJOR		5
+
+/* For PMIC7 */
+#define ADC_APP_SID				0x40
+#define ADC_APP_SID_MASK			GENMASK(3, 0)
+#define ADC7_CONV_TIMEOUT			msecs_to_jiffies(10)
+
+enum adc5_cal_method {
+	ADC5_NO_CAL = 0,
+	ADC5_RATIOMETRIC_CAL,
+	ADC5_ABSOLUTE_CAL
+};
+
+enum adc5_cal_val {
+	ADC5_TIMER_CAL = 0,
+	ADC5_NEW_CAL
+};
+
+/**
+ * struct adc5_channel_prop - ADC channel property.
+ * @channel: channel number, refer to the channel list.
+ * @cal_method: calibration method.
+ * @cal_val: calibration value
+ * @decimation: sampling rate supported for the channel.
+ * @sid: slave id of PMIC owning the channel, for PMIC7.
+ * @prescale: channel scaling performed on the input signal.
+ * @hw_settle_time: the time between AMUX being configured and the
+ *	start of conversion.
+ * @avg_samples: ability to provide single result from the ADC
+ *	that is an average of multiple measurements.
+ * @scale_fn_type: Represents the scaling function to convert voltage
+ *	physical units desired by the client for the channel.
+ * @datasheet_name: Channel name used in device tree.
+ */
+struct adc5_channel_prop {
+	unsigned int		channel;
+	enum adc5_cal_method	cal_method;
+	enum adc5_cal_val	cal_val;
+	unsigned int		decimation;
+	unsigned int		sid;
+	unsigned int		prescale;
+	unsigned int		hw_settle_time;
+	unsigned int		avg_samples;
+	enum vadc_scale_fn_type	scale_fn_type;
+	const char		*datasheet_name;
+};
+
+/**
+ * struct adc5_chip - ADC private structure.
+ * @regmap: SPMI ADC5 peripheral register map field.
+ * @dev: SPMI ADC5 device.
+ * @base: base address for the ADC peripheral.
+ * @nchannels: number of ADC channels.
+ * @chan_props: array of ADC channel properties.
+ * @iio_chans: array of IIO channels specification.
+ * @poll_eoc: use polling instead of interrupt.
+ * @complete: ADC result notification after interrupt is received.
+ * @lock: ADC lock for access to the peripheral.
+ * @data: software configuration data.
+ */
+struct adc5_chip {
+	struct regmap		*regmap;
+	struct device		*dev;
+	u16			base;
+	unsigned int		nchannels;
+	struct adc5_channel_prop	*chan_props;
+	struct iio_chan_spec	*iio_chans;
+	bool			poll_eoc;
+	struct completion	complete;
+	struct mutex		lock;
+	const struct adc5_data	*data;
+};
+
+static const struct vadc_prescale_ratio adc5_prescale_ratios[] = {
+	{.num =  1, .den =  1},
+	{.num =  1, .den =  3},
+	{.num =  1, .den =  4},
+	{.num =  1, .den =  6},
+	{.num =  1, .den = 20},
+	{.num =  1, .den =  8},
+	{.num = 10, .den = 81},
+	{.num =  1, .den = 10},
+	{.num =  1, .den = 16}
+};
+
+static int adc5_read(struct adc5_chip *adc, u16 offset, u8 *data, int len)
+{
+	return regmap_bulk_read(adc->regmap, adc->base + offset, data, len);
+}
+
+static int adc5_write(struct adc5_chip *adc, u16 offset, u8 *data, int len)
+{
+	return regmap_bulk_write(adc->regmap, adc->base + offset, data, len);
+}
+
+static int adc5_masked_write(struct adc5_chip *adc, u16 offset, u8 mask, u8 val)
+{
+	return regmap_update_bits(adc->regmap, adc->base + offset, mask, val);
+}
+
+static int adc5_prescaling_from_dt(u32 num, u32 den)
+{
+	unsigned int pre;
+
+	for (pre = 0; pre < ARRAY_SIZE(adc5_prescale_ratios); pre++)
+		if (adc5_prescale_ratios[pre].num == num &&
+		    adc5_prescale_ratios[pre].den == den)
+			break;
+
+	if (pre == ARRAY_SIZE(adc5_prescale_ratios))
+		return -EINVAL;
+
+	return pre;
+}
+
+static int adc5_hw_settle_time_from_dt(u32 value,
+					const unsigned int *hw_settle)
+{
+	unsigned int i;
+
+	for (i = 0; i < VADC_HW_SETTLE_SAMPLES_MAX; i++) {
+		if (value == hw_settle[i])
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int adc5_avg_samples_from_dt(u32 value)
+{
+	if (!is_power_of_2(value) || value > ADC5_AVG_SAMPLES_MAX)
+		return -EINVAL;
+
+	return __ffs(value);
+}
+
+static int adc5_decimation_from_dt(u32 value,
+					const unsigned int *decimation)
+{
+	unsigned int i;
+
+	for (i = 0; i < ADC5_DECIMATION_SAMPLES_MAX; i++) {
+		if (value == decimation[i])
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int adc5_read_voltage_data(struct adc5_chip *adc, u16 *data)
+{
+	int ret;
+	u8 rslt_lsb, rslt_msb;
+
+	ret = adc5_read(adc, ADC5_USR_DATA0, &rslt_lsb, sizeof(rslt_lsb));
+	if (ret)
+		return ret;
+
+	ret = adc5_read(adc, ADC5_USR_DATA1, &rslt_msb, sizeof(rslt_lsb));
+	if (ret)
+		return ret;
+
+	*data = (rslt_msb << 8) | rslt_lsb;
+
+	if (*data == ADC5_USR_DATA_CHECK) {
+		dev_err(adc->dev, "Invalid data:0x%x\n", *data);
+		return -EINVAL;
+	}
+
+	dev_dbg(adc->dev, "voltage raw code:0x%x\n", *data);
+
+	return 0;
+}
+
+static int adc5_poll_wait_eoc(struct adc5_chip *adc)
+{
+	unsigned int count, retry = ADC5_CONV_TIME_RETRY;
+	u8 status1;
+	int ret;
+
+	for (count = 0; count < retry; count++) {
+		ret = adc5_read(adc, ADC5_USR_STATUS1, &status1,
+							sizeof(status1));
+		if (ret)
+			return ret;
+
+		status1 &= ADC5_USR_STATUS1_REQ_STS_EOC_MASK;
+		if (status1 == ADC5_USR_STATUS1_EOC)
+			return 0;
+
+		usleep_range(ADC5_CONV_TIME_MIN_US, ADC5_CONV_TIME_MAX_US);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static void adc5_update_dig_param(struct adc5_chip *adc,
+			struct adc5_channel_prop *prop, u8 *data)
+{
+	/* Update calibration value */
+	*data &= ~ADC5_USR_DIG_PARAM_CAL_VAL;
+	*data |= (prop->cal_val << ADC5_USR_DIG_PARAM_CAL_VAL_SHIFT);
+
+	/* Update calibration select */
+	*data &= ~ADC5_USR_DIG_PARAM_CAL_SEL;
+	*data |= (prop->cal_method << ADC5_USR_DIG_PARAM_CAL_SEL_SHIFT);
+
+	/* Update decimation ratio select */
+	*data &= ~ADC5_USR_DIG_PARAM_DEC_RATIO_SEL;
+	*data |= (prop->decimation << ADC5_USR_DIG_PARAM_DEC_RATIO_SEL_SHIFT);
+}
+
+static int adc5_configure(struct adc5_chip *adc,
+			struct adc5_channel_prop *prop)
+{
+	int ret;
+	u8 buf[6];
+
+	/* Read registers 0x42 through 0x46 */
+	ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf));
+	if (ret)
+		return ret;
+
+	/* Digital param selection */
+	adc5_update_dig_param(adc, prop, &buf[0]);
+
+	/* Update fast average sample value */
+	buf[1] &= (u8) ~ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK;
+	buf[1] |= prop->avg_samples;
+
+	/* Select ADC channel */
+	buf[2] = prop->channel;
+
+	/* Select HW settle delay for channel */
+	buf[3] &= (u8) ~ADC5_USR_HW_SETTLE_DELAY_MASK;
+	buf[3] |= prop->hw_settle_time;
+
+	/* Select ADC enable */
+	buf[4] |= ADC5_USR_EN_CTL1_ADC_EN;
+
+	/* Select CONV request */
+	buf[5] |= ADC5_USR_CONV_REQ_REQ;
+
+	if (!adc->poll_eoc)
+		reinit_completion(&adc->complete);
+
+	return adc5_write(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf));
+}
+
+static int adc7_configure(struct adc5_chip *adc,
+			struct adc5_channel_prop *prop)
+{
+	int ret;
+	u8 conv_req = 0, buf[4];
+
+	ret = adc5_masked_write(adc, ADC_APP_SID, ADC_APP_SID_MASK, prop->sid);
+	if (ret)
+		return ret;
+
+	ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf));
+	if (ret)
+		return ret;
+
+	/* Digital param selection */
+	adc5_update_dig_param(adc, prop, &buf[0]);
+
+	/* Update fast average sample value */
+	buf[1] &= ~ADC5_USR_FAST_AVG_CTL_SAMPLES_MASK;
+	buf[1] |= prop->avg_samples;
+
+	/* Select ADC channel */
+	buf[2] = prop->channel;
+
+	/* Select HW settle delay for channel */
+	buf[3] &= ~ADC5_USR_HW_SETTLE_DELAY_MASK;
+	buf[3] |= prop->hw_settle_time;
+
+	/* Select CONV request */
+	conv_req = ADC5_USR_CONV_REQ_REQ;
+
+	if (!adc->poll_eoc)
+		reinit_completion(&adc->complete);
+
+	ret = adc5_write(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf));
+	if (ret)
+		return ret;
+
+	return adc5_write(adc, ADC5_USR_CONV_REQ, &conv_req, 1);
+}
+
+static int adc5_do_conversion(struct adc5_chip *adc,
+			struct adc5_channel_prop *prop,
+			struct iio_chan_spec const *chan,
+			u16 *data_volt, u16 *data_cur)
+{
+	int ret;
+
+	mutex_lock(&adc->lock);
+
+	ret = adc5_configure(adc, prop);
+	if (ret) {
+		dev_err(adc->dev, "ADC configure failed with %d\n", ret);
+		goto unlock;
+	}
+
+	if (adc->poll_eoc) {
+		ret = adc5_poll_wait_eoc(adc);
+		if (ret) {
+			dev_err(adc->dev, "EOC bit not set\n");
+			goto unlock;
+		}
+	} else {
+		ret = wait_for_completion_timeout(&adc->complete,
+							ADC5_CONV_TIMEOUT);
+		if (!ret) {
+			dev_dbg(adc->dev, "Did not get completion timeout.\n");
+			ret = adc5_poll_wait_eoc(adc);
+			if (ret) {
+				dev_err(adc->dev, "EOC bit not set\n");
+				goto unlock;
+			}
+		}
+	}
+
+	ret = adc5_read_voltage_data(adc, data_volt);
+unlock:
+	mutex_unlock(&adc->lock);
+
+	return ret;
+}
+
+static int adc7_do_conversion(struct adc5_chip *adc,
+			struct adc5_channel_prop *prop,
+			struct iio_chan_spec const *chan,
+			u16 *data_volt, u16 *data_cur)
+{
+	int ret;
+	u8 status;
+
+	mutex_lock(&adc->lock);
+
+	ret = adc7_configure(adc, prop);
+	if (ret) {
+		dev_err(adc->dev, "ADC configure failed with %d\n", ret);
+		goto unlock;
+	}
+
+	/* No support for polling mode at present */
+	wait_for_completion_timeout(&adc->complete, ADC7_CONV_TIMEOUT);
+
+	ret = adc5_read(adc, ADC5_USR_STATUS1, &status, 1);
+	if (ret)
+		goto unlock;
+
+	if (status & ADC5_USR_STATUS1_CONV_FAULT) {
+		dev_err(adc->dev, "Unexpected conversion fault\n");
+		ret = -EIO;
+		goto unlock;
+	}
+
+	ret = adc5_read_voltage_data(adc, data_volt);
+
+unlock:
+	mutex_unlock(&adc->lock);
+
+	return ret;
+}
+
+typedef int (*adc_do_conversion)(struct adc5_chip *adc,
+			struct adc5_channel_prop *prop,
+			struct iio_chan_spec const *chan,
+			u16 *data_volt, u16 *data_cur);
+
+static irqreturn_t adc5_isr(int irq, void *dev_id)
+{
+	struct adc5_chip *adc = dev_id;
+
+	complete(&adc->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int adc5_of_xlate(struct iio_dev *indio_dev,
+				const struct of_phandle_args *iiospec)
+{
+	struct adc5_chip *adc = iio_priv(indio_dev);
+	int i;
+
+	for (i = 0; i < adc->nchannels; i++)
+		if (adc->chan_props[i].channel == iiospec->args[0])
+			return i;
+
+	return -EINVAL;
+}
+
+static int adc7_of_xlate(struct iio_dev *indio_dev,
+				const struct of_phandle_args *iiospec)
+{
+	struct adc5_chip *adc = iio_priv(indio_dev);
+	int i, v_channel;
+
+	for (i = 0; i < adc->nchannels; i++) {
+		v_channel = (adc->chan_props[i].sid << ADC_CHANNEL_OFFSET) |
+			adc->chan_props[i].channel;
+		if (v_channel == iiospec->args[0])
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int adc_read_raw_common(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan, int *val, int *val2,
+			 long mask, adc_do_conversion do_conv)
+{
+	struct adc5_chip *adc = iio_priv(indio_dev);
+	struct adc5_channel_prop *prop;
+	u16 adc_code_volt, adc_code_cur;
+	int ret;
+
+	prop = &adc->chan_props[chan->address];
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		ret = do_conv(adc, prop, chan,
+					&adc_code_volt, &adc_code_cur);
+		if (ret)
+			return ret;
+
+		ret = qcom_adc5_hw_scale(prop->scale_fn_type,
+			&adc5_prescale_ratios[prop->prescale],
+			adc->data,
+			adc_code_volt, val);
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int adc5_read_raw(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan, int *val, int *val2,
+			 long mask)
+{
+	return adc_read_raw_common(indio_dev, chan, val, val2,
+				mask, adc5_do_conversion);
+}
+
+static int adc7_read_raw(struct iio_dev *indio_dev,
+			 struct iio_chan_spec const *chan, int *val, int *val2,
+			 long mask)
+{
+	return adc_read_raw_common(indio_dev, chan, val, val2,
+				mask, adc7_do_conversion);
+}
+
+static const struct iio_info adc5_info = {
+	.read_raw = adc5_read_raw,
+	.of_xlate = adc5_of_xlate,
+};
+
+static const struct iio_info adc7_info = {
+	.read_raw = adc7_read_raw,
+	.of_xlate = adc7_of_xlate,
+};
+
+struct adc5_channels {
+	const char *datasheet_name;
+	unsigned int prescale_index;
+	enum iio_chan_type type;
+	long info_mask;
+	enum vadc_scale_fn_type scale_fn_type;
+};
+
+/* In these definitions, _pre refers to an index into adc5_prescale_ratios. */
+#define ADC5_CHAN(_dname, _type, _mask, _pre, _scale)			\
+	{								\
+		.datasheet_name = _dname,				\
+		.prescale_index = _pre,					\
+		.type = _type,						\
+		.info_mask = _mask,					\
+		.scale_fn_type = _scale,				\
+	},								\
+
+#define ADC5_CHAN_TEMP(_dname, _pre, _scale)				\
+	ADC5_CHAN(_dname, IIO_TEMP,					\
+		BIT(IIO_CHAN_INFO_PROCESSED),				\
+		_pre, _scale)						\
+
+#define ADC5_CHAN_VOLT(_dname, _pre, _scale)				\
+	ADC5_CHAN(_dname, IIO_VOLTAGE,					\
+		  BIT(IIO_CHAN_INFO_PROCESSED),				\
+		  _pre, _scale)						\
+
+static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
+	[ADC5_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 0,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 0,
+					SCALE_HW_CALIB_PMIC_THERM)
+	[ADC5_USB_IN_I]		= ADC5_CHAN_VOLT("usb_in_i_uv", 0,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_USB_IN_V_16]	= ADC5_CHAN_VOLT("usb_in_v_div_16", 8,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_CHG_TEMP]		= ADC5_CHAN_TEMP("chg_temp", 0,
+					SCALE_HW_CALIB_PM5_CHG_TEMP)
+	/* Charger prescales SBUx and MID_CHG to fit within 1.8V upper unit */
+	[ADC5_SBUx]		= ADC5_CHAN_VOLT("chg_sbux", 1,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_MID_CHG_DIV6]	= ADC5_CHAN_VOLT("chg_mid_chg", 3,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm", 0,
+					SCALE_HW_CALIB_XOTHERM)
+	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+	[ADC5_AMUX_THM2]	= ADC5_CHAN_TEMP("amux_thm2", 0,
+					SCALE_HW_CALIB_PM5_SMB_TEMP)
+};
+
+static const struct adc5_channels adc7_chans_pmic[ADC5_MAX_CHANNEL] = {
+	[ADC7_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 0,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC7_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC7_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC7_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 3,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC7_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 0,
+					SCALE_HW_CALIB_PMIC_THERM_PM7)
+	[ADC7_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_pu2", 0,
+					SCALE_HW_CALIB_THERM_100K_PU_PM7)
+	[ADC7_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_pu2", 0,
+					SCALE_HW_CALIB_THERM_100K_PU_PM7)
+	[ADC7_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_pu2", 0,
+					SCALE_HW_CALIB_THERM_100K_PU_PM7)
+	[ADC7_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_pu2", 0,
+					SCALE_HW_CALIB_THERM_100K_PU_PM7)
+	[ADC7_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_pu2", 0,
+					SCALE_HW_CALIB_THERM_100K_PU_PM7)
+	[ADC7_AMUX_THM6_100K_PU] = ADC5_CHAN_TEMP("amux_thm6_pu2", 0,
+					SCALE_HW_CALIB_THERM_100K_PU_PM7)
+	[ADC7_GPIO1_100K_PU]	= ADC5_CHAN_TEMP("gpio1_pu2", 0,
+					SCALE_HW_CALIB_THERM_100K_PU_PM7)
+	[ADC7_GPIO2_100K_PU]	= ADC5_CHAN_TEMP("gpio2_pu2", 0,
+					SCALE_HW_CALIB_THERM_100K_PU_PM7)
+	[ADC7_GPIO3_100K_PU]	= ADC5_CHAN_TEMP("gpio3_pu2", 0,
+					SCALE_HW_CALIB_THERM_100K_PU_PM7)
+	[ADC7_GPIO4_100K_PU]	= ADC5_CHAN_TEMP("gpio4_pu2", 0,
+					SCALE_HW_CALIB_THERM_100K_PU_PM7)
+};
+
+static const struct adc5_channels adc5_chans_rev2[ADC5_MAX_CHANNEL] = {
+	[ADC5_REF_GND]		= ADC5_CHAN_VOLT("ref_gnd", 0,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_1P25VREF]		= ADC5_CHAN_VOLT("vref_1p25", 0,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_VPH_PWR]		= ADC5_CHAN_VOLT("vph_pwr", 1,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_VBAT_SNS]		= ADC5_CHAN_VOLT("vbat_sns", 1,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_VCOIN]		= ADC5_CHAN_VOLT("vcoin", 1,
+					SCALE_HW_CALIB_DEFAULT)
+	[ADC5_DIE_TEMP]		= ADC5_CHAN_TEMP("die_temp", 0,
+					SCALE_HW_CALIB_PMIC_THERM)
+	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+	[ADC5_AMUX_THM2_100K_PU] = ADC5_CHAN_TEMP("amux_thm2_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+	[ADC5_AMUX_THM3_100K_PU] = ADC5_CHAN_TEMP("amux_thm3_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+	[ADC5_AMUX_THM4_100K_PU] = ADC5_CHAN_TEMP("amux_thm4_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+	[ADC5_AMUX_THM5_100K_PU] = ADC5_CHAN_TEMP("amux_thm5_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm_100k_pu", 0,
+					SCALE_HW_CALIB_THERM_100K_PULLUP)
+};
+
+static int adc5_get_dt_channel_data(struct adc5_chip *adc,
+				    struct adc5_channel_prop *prop,
+				    struct device_node *node,
+				    const struct adc5_data *data)
+{
+	const char *name = node->name, *channel_name;
+	u32 chan, value, varr[2];
+	u32 sid = 0;
+	int ret;
+	struct device *dev = adc->dev;
+
+	ret = of_property_read_u32(node, "reg", &chan);
+	if (ret) {
+		dev_err(dev, "invalid channel number %s\n", name);
+		return ret;
+	}
+
+	/* Value read from "reg" is virtual channel number */
+
+	/* virtual channel number = sid << 8 | channel number */
+
+	if (adc->data->info == &adc7_info) {
+		sid = chan >> ADC_CHANNEL_OFFSET;
+		chan = chan & ADC_CHANNEL_MASK;
+	}
+
+	if (chan > ADC5_PARALLEL_ISENSE_VBAT_IDATA ||
+	    !data->adc_chans[chan].datasheet_name) {
+		dev_err(dev, "%s invalid channel number %d\n", name, chan);
+		return -EINVAL;
+	}
+
+	/* the channel has DT description */
+	prop->channel = chan;
+	prop->sid = sid;
+
+	channel_name = of_get_property(node,
+				"label", NULL) ? : node->name;
+	if (!channel_name) {
+		dev_err(dev, "Invalid channel name\n");
+		return -EINVAL;
+	}
+	prop->datasheet_name = channel_name;
+
+	ret = of_property_read_u32(node, "qcom,decimation", &value);
+	if (!ret) {
+		ret = adc5_decimation_from_dt(value, data->decimation);
+		if (ret < 0) {
+			dev_err(dev, "%02x invalid decimation %d\n",
+				chan, value);
+			return ret;
+		}
+		prop->decimation = ret;
+	} else {
+		prop->decimation = ADC5_DECIMATION_DEFAULT;
+	}
+
+	ret = of_property_read_u32_array(node, "qcom,pre-scaling", varr, 2);
+	if (!ret) {
+		ret = adc5_prescaling_from_dt(varr[0], varr[1]);
+		if (ret < 0) {
+			dev_err(dev, "%02x invalid pre-scaling <%d %d>\n",
+				chan, varr[0], varr[1]);
+			return ret;
+		}
+		prop->prescale = ret;
+	} else {
+		prop->prescale =
+			adc->data->adc_chans[prop->channel].prescale_index;
+	}
+
+	ret = of_property_read_u32(node, "qcom,hw-settle-time", &value);
+	if (!ret) {
+		u8 dig_version[2];
+
+		ret = adc5_read(adc, ADC5_USR_REVISION1, dig_version,
+							sizeof(dig_version));
+		if (ret) {
+			dev_err(dev, "Invalid dig version read %d\n", ret);
+			return ret;
+		}
+
+		dev_dbg(dev, "dig_ver:minor:%d, major:%d\n", dig_version[0],
+						dig_version[1]);
+		/* Digital controller >= 5.3 have hw_settle_2 option */
+		if ((dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR &&
+			dig_version[1] >= ADC5_HW_SETTLE_DIFF_MAJOR) ||
+			adc->data->info == &adc7_info)
+			ret = adc5_hw_settle_time_from_dt(value,
+							data->hw_settle_2);
+		else
+			ret = adc5_hw_settle_time_from_dt(value,
+							data->hw_settle_1);
+
+		if (ret < 0) {
+			dev_err(dev, "%02x invalid hw-settle-time %d us\n",
+				chan, value);
+			return ret;
+		}
+		prop->hw_settle_time = ret;
+	} else {
+		prop->hw_settle_time = VADC_DEF_HW_SETTLE_TIME;
+	}
+
+	ret = of_property_read_u32(node, "qcom,avg-samples", &value);
+	if (!ret) {
+		ret = adc5_avg_samples_from_dt(value);
+		if (ret < 0) {
+			dev_err(dev, "%02x invalid avg-samples %d\n",
+				chan, value);
+			return ret;
+		}
+		prop->avg_samples = ret;
+	} else {
+		prop->avg_samples = VADC_DEF_AVG_SAMPLES;
+	}
+
+	if (of_property_read_bool(node, "qcom,ratiometric"))
+		prop->cal_method = ADC5_RATIOMETRIC_CAL;
+	else
+		prop->cal_method = ADC5_ABSOLUTE_CAL;
+
+	/*
+	 * Default to using timer calibration. Using a fresh calibration value
+	 * for every conversion will increase the overall time for a request.
+	 */
+	prop->cal_val = ADC5_TIMER_CAL;
+
+	dev_dbg(dev, "%02x name %s\n", chan, name);
+
+	return 0;
+}
+
+static const struct adc5_data adc5_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.full_scale_code_cur = 0x2710,
+	.adc_chans = adc5_chans_pmic,
+	.info = &adc5_info,
+	.decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
+				{250, 420, 840},
+	.hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
+				{15, 100, 200, 300, 400, 500, 600, 700,
+				800, 900, 1, 2, 4, 6, 8, 10},
+	.hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
+				{15, 100, 200, 300, 400, 500, 600, 700,
+				1, 2, 4, 8, 16, 32, 64, 128},
+};
+
+static const struct adc5_data adc7_data_pmic = {
+	.full_scale_code_volt = 0x70e4,
+	.adc_chans = adc7_chans_pmic,
+	.info = &adc7_info,
+	.decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
+				{85, 340, 1360},
+	.hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
+				{15, 100, 200, 300, 400, 500, 600, 700,
+				1000, 2000, 4000, 8000, 16000, 32000,
+				64000, 128000},
+};
+
+static const struct adc5_data adc5_data_pmic_rev2 = {
+	.full_scale_code_volt = 0x4000,
+	.full_scale_code_cur = 0x1800,
+	.adc_chans = adc5_chans_rev2,
+	.info = &adc5_info,
+	.decimation = (unsigned int [ADC5_DECIMATION_SAMPLES_MAX])
+				{256, 512, 1024},
+	.hw_settle_1 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
+				{0, 100, 200, 300, 400, 500, 600, 700,
+				800, 900, 1, 2, 4, 6, 8, 10},
+	.hw_settle_2 = (unsigned int [VADC_HW_SETTLE_SAMPLES_MAX])
+				{15, 100, 200, 300, 400, 500, 600, 700,
+				1, 2, 4, 8, 16, 32, 64, 128},
+};
+
+static const struct of_device_id adc5_match_table[] = {
+	{
+		.compatible = "qcom,spmi-adc5",
+		.data = &adc5_data_pmic,
+	},
+	{
+		.compatible = "qcom,spmi-adc7",
+		.data = &adc7_data_pmic,
+	},
+	{
+		.compatible = "qcom,spmi-adc-rev2",
+		.data = &adc5_data_pmic_rev2,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adc5_match_table);
+
+static int adc5_get_dt_data(struct adc5_chip *adc, struct device_node *node)
+{
+	const struct adc5_channels *adc_chan;
+	struct iio_chan_spec *iio_chan;
+	struct adc5_channel_prop prop, *chan_props;
+	struct device_node *child;
+	unsigned int index = 0;
+	const struct of_device_id *id;
+	const struct adc5_data *data;
+	int ret;
+
+	adc->nchannels = of_get_available_child_count(node);
+	if (!adc->nchannels)
+		return -EINVAL;
+
+	adc->iio_chans = devm_kcalloc(adc->dev, adc->nchannels,
+				       sizeof(*adc->iio_chans), GFP_KERNEL);
+	if (!adc->iio_chans)
+		return -ENOMEM;
+
+	adc->chan_props = devm_kcalloc(adc->dev, adc->nchannels,
+					sizeof(*adc->chan_props), GFP_KERNEL);
+	if (!adc->chan_props)
+		return -ENOMEM;
+
+	chan_props = adc->chan_props;
+	iio_chan = adc->iio_chans;
+	id = of_match_node(adc5_match_table, node);
+	if (id)
+		data = id->data;
+	else
+		data = &adc5_data_pmic;
+	adc->data = data;
+
+	for_each_available_child_of_node(node, child) {
+		ret = adc5_get_dt_channel_data(adc, &prop, child, data);
+		if (ret) {
+			of_node_put(child);
+			return ret;
+		}
+
+		prop.scale_fn_type =
+			data->adc_chans[prop.channel].scale_fn_type;
+		*chan_props = prop;
+		adc_chan = &data->adc_chans[prop.channel];
+
+		iio_chan->channel = prop.channel;
+		iio_chan->datasheet_name = prop.datasheet_name;
+		iio_chan->extend_name = prop.datasheet_name;
+		iio_chan->info_mask_separate = adc_chan->info_mask;
+		iio_chan->type = adc_chan->type;
+		iio_chan->address = index;
+		iio_chan++;
+		chan_props++;
+		index++;
+	}
+
+	return 0;
+}
+
+static int adc5_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct iio_dev *indio_dev;
+	struct adc5_chip *adc;
+	struct regmap *regmap;
+	int ret, irq_eoc;
+	u32 reg;
+
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENODEV;
+
+	ret = of_property_read_u32(node, "reg", &reg);
+	if (ret < 0)
+		return ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->regmap = regmap;
+	adc->dev = dev;
+	adc->base = reg;
+
+	init_completion(&adc->complete);
+	mutex_init(&adc->lock);
+
+	ret = adc5_get_dt_data(adc, node);
+	if (ret) {
+		dev_err(dev, "adc get dt data failed\n");
+		return ret;
+	}
+
+	irq_eoc = platform_get_irq(pdev, 0);
+	if (irq_eoc < 0) {
+		if (irq_eoc == -EPROBE_DEFER || irq_eoc == -EINVAL)
+			return irq_eoc;
+		adc->poll_eoc = true;
+	} else {
+		ret = devm_request_irq(dev, irq_eoc, adc5_isr, 0,
+				       "pm-adc5", adc);
+		if (ret)
+			return ret;
+	}
+
+	indio_dev->name = pdev->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = adc->data->info;
+	indio_dev->channels = adc->iio_chans;
+	indio_dev->num_channels = adc->nchannels;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static struct platform_driver adc5_driver = {
+	.driver = {
+		.name = "qcom-spmi-adc5",
+		.of_match_table = adc5_match_table,
+	},
+	.probe = adc5_probe,
+};
+module_platform_driver(adc5_driver);
+
+MODULE_ALIAS("platform:qcom-spmi-adc5");
+MODULE_DESCRIPTION("Qualcomm Technologies Inc. PMIC5 ADC driver");
+MODULE_LICENSE("GPL v2");