Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 716 insertions, 0 deletions

diff --git a/drivers/iio/adc/sun4i-gpadc-iio.c b/drivers/iio/adc/sun4i-gpadc-iio.c
new file mode 100644
index 000000000..99b43f28e
--- /dev/null
+++ b/drivers/iio/adc/sun4i-gpadc-iio.c
@@ -0,0 +1,716 @@
+// SPDX-License-Identifier: GPL-2.0
+/* ADC driver for sunxi platforms' (A10, A13 and A31) GPADC
+ *
+ * Copyright (c) 2016 Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * The Allwinner SoCs all have an ADC that can also act as a touchscreen
+ * controller and a thermal sensor.
+ * The thermal sensor works only when the ADC acts as a touchscreen controller
+ * and is configured to throw an interrupt every fixed periods of time (let say
+ * every X seconds).
+ * One would be tempted to disable the IP on the hardware side rather than
+ * disabling interrupts to save some power but that resets the internal clock of
+ * the IP, resulting in having to wait X seconds every time we want to read the
+ * value of the thermal sensor.
+ * This is also the reason of using autosuspend in pm_runtime. If there was no
+ * autosuspend, the thermal sensor would need X seconds after every
+ * pm_runtime_get_sync to get a value from the ADC. The autosuspend allows the
+ * thermal sensor to be requested again in a certain time span before it gets
+ * shutdown for not being used.
+ */
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/thermal.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/machine.h>
+#include <linux/mfd/sun4i-gpadc.h>
+
+static unsigned int sun4i_gpadc_chan_select(unsigned int chan)
+{
+	return SUN4I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
+}
+
+static unsigned int sun6i_gpadc_chan_select(unsigned int chan)
+{
+	return SUN6I_GPADC_CTRL1_ADC_CHAN_SELECT(chan);
+}
+
+struct gpadc_data {
+	int		temp_offset;
+	int		temp_scale;
+	unsigned int	tp_mode_en;
+	unsigned int	tp_adc_select;
+	unsigned int	(*adc_chan_select)(unsigned int chan);
+	unsigned int	adc_chan_mask;
+};
+
+static const struct gpadc_data sun4i_gpadc_data = {
+	.temp_offset = -1932,
+	.temp_scale = 133,
+	.tp_mode_en = SUN4I_GPADC_CTRL1_TP_MODE_EN,
+	.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
+	.adc_chan_select = &sun4i_gpadc_chan_select,
+	.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+};
+
+static const struct gpadc_data sun5i_gpadc_data = {
+	.temp_offset = -1447,
+	.temp_scale = 100,
+	.tp_mode_en = SUN4I_GPADC_CTRL1_TP_MODE_EN,
+	.tp_adc_select = SUN4I_GPADC_CTRL1_TP_ADC_SELECT,
+	.adc_chan_select = &sun4i_gpadc_chan_select,
+	.adc_chan_mask = SUN4I_GPADC_CTRL1_ADC_CHAN_MASK,
+};
+
+static const struct gpadc_data sun6i_gpadc_data = {
+	.temp_offset = -1623,
+	.temp_scale = 167,
+	.tp_mode_en = SUN6I_GPADC_CTRL1_TP_MODE_EN,
+	.tp_adc_select = SUN6I_GPADC_CTRL1_TP_ADC_SELECT,
+	.adc_chan_select = &sun6i_gpadc_chan_select,
+	.adc_chan_mask = SUN6I_GPADC_CTRL1_ADC_CHAN_MASK,
+};
+
+static const struct gpadc_data sun8i_a33_gpadc_data = {
+	.temp_offset = -1662,
+	.temp_scale = 162,
+	.tp_mode_en = SUN8I_GPADC_CTRL1_CHOP_TEMP_EN,
+};
+
+struct sun4i_gpadc_iio {
+	struct iio_dev			*indio_dev;
+	struct completion		completion;
+	int				temp_data;
+	u32				adc_data;
+	struct regmap			*regmap;
+	unsigned int			fifo_data_irq;
+	atomic_t			ignore_fifo_data_irq;
+	unsigned int			temp_data_irq;
+	atomic_t			ignore_temp_data_irq;
+	const struct gpadc_data		*data;
+	bool				no_irq;
+	/* prevents concurrent reads of temperature and ADC */
+	struct mutex			mutex;
+	struct thermal_zone_device	*tzd;
+	struct device			*sensor_device;
+};
+
+#define SUN4I_GPADC_ADC_CHANNEL(_channel, _name) {		\
+	.type = IIO_VOLTAGE,					\
+	.indexed = 1,						\
+	.channel = _channel,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	.datasheet_name = _name,				\
+}
+
+static struct iio_map sun4i_gpadc_hwmon_maps[] = {
+	{
+		.adc_channel_label = "temp_adc",
+		.consumer_dev_name = "iio_hwmon.0",
+	},
+	{ /* sentinel */ },
+};
+
+static const struct iio_chan_spec sun4i_gpadc_channels[] = {
+	SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"),
+	SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"),
+	SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"),
+	SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OFFSET),
+		.datasheet_name = "temp_adc",
+	},
+};
+
+static const struct iio_chan_spec sun4i_gpadc_channels_no_temp[] = {
+	SUN4I_GPADC_ADC_CHANNEL(0, "adc_chan0"),
+	SUN4I_GPADC_ADC_CHANNEL(1, "adc_chan1"),
+	SUN4I_GPADC_ADC_CHANNEL(2, "adc_chan2"),
+	SUN4I_GPADC_ADC_CHANNEL(3, "adc_chan3"),
+};
+
+static const struct iio_chan_spec sun8i_a33_gpadc_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OFFSET),
+		.datasheet_name = "temp_adc",
+	},
+};
+
+static const struct regmap_config sun4i_gpadc_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.fast_io = true,
+};
+
+static int sun4i_prepare_for_irq(struct iio_dev *indio_dev, int channel,
+				 unsigned int irq)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+	int ret;
+	u32 reg;
+
+	pm_runtime_get_sync(indio_dev->dev.parent);
+
+	reinit_completion(&info->completion);
+
+	ret = regmap_write(info->regmap, SUN4I_GPADC_INT_FIFOC,
+			   SUN4I_GPADC_INT_FIFOC_TP_FIFO_TRIG_LEVEL(1) |
+			   SUN4I_GPADC_INT_FIFOC_TP_FIFO_FLUSH);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(info->regmap, SUN4I_GPADC_CTRL1, &reg);
+	if (ret)
+		return ret;
+
+	if (irq == info->fifo_data_irq) {
+		ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
+				   info->data->tp_mode_en |
+				   info->data->tp_adc_select |
+				   info->data->adc_chan_select(channel));
+		/*
+		 * When the IP changes channel, it needs a bit of time to get
+		 * correct values.
+		 */
+		if ((reg & info->data->adc_chan_mask) !=
+			 info->data->adc_chan_select(channel))
+			mdelay(10);
+
+	} else {
+		/*
+		 * The temperature sensor returns valid data only when the ADC
+		 * operates in touchscreen mode.
+		 */
+		ret = regmap_write(info->regmap, SUN4I_GPADC_CTRL1,
+				   info->data->tp_mode_en);
+	}
+
+	if (ret)
+		return ret;
+
+	/*
+	 * When the IP changes mode between ADC or touchscreen, it
+	 * needs a bit of time to get correct values.
+	 */
+	if ((reg & info->data->tp_adc_select) != info->data->tp_adc_select)
+		mdelay(100);
+
+	return 0;
+}
+
+static int sun4i_gpadc_read(struct iio_dev *indio_dev, int channel, int *val,
+			    unsigned int irq)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&info->mutex);
+
+	ret = sun4i_prepare_for_irq(indio_dev, channel, irq);
+	if (ret)
+		goto err;
+
+	enable_irq(irq);
+
+	/*
+	 * The temperature sensor throws an interruption periodically (currently
+	 * set at periods of ~0.6s in sun4i_gpadc_runtime_resume). A 1s delay
+	 * makes sure an interruption occurs in normal conditions. If it doesn't
+	 * occur, then there is a timeout.
+	 */
+	if (!wait_for_completion_timeout(&info->completion,
+					 msecs_to_jiffies(1000))) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	if (irq == info->fifo_data_irq)
+		*val = info->adc_data;
+	else
+		*val = info->temp_data;
+
+	ret = 0;
+	pm_runtime_mark_last_busy(indio_dev->dev.parent);
+
+err:
+	pm_runtime_put_autosuspend(indio_dev->dev.parent);
+	disable_irq(irq);
+	mutex_unlock(&info->mutex);
+
+	return ret;
+}
+
+static int sun4i_gpadc_adc_read(struct iio_dev *indio_dev, int channel,
+				int *val)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+
+	return sun4i_gpadc_read(indio_dev, channel, val, info->fifo_data_irq);
+}
+
+static int sun4i_gpadc_temp_read(struct iio_dev *indio_dev, int *val)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+
+	if (info->no_irq) {
+		pm_runtime_get_sync(indio_dev->dev.parent);
+
+		regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, val);
+
+		pm_runtime_mark_last_busy(indio_dev->dev.parent);
+		pm_runtime_put_autosuspend(indio_dev->dev.parent);
+
+		return 0;
+	}
+
+	return sun4i_gpadc_read(indio_dev, 0, val, info->temp_data_irq);
+}
+
+static int sun4i_gpadc_temp_offset(struct iio_dev *indio_dev, int *val)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+
+	*val = info->data->temp_offset;
+
+	return 0;
+}
+
+static int sun4i_gpadc_temp_scale(struct iio_dev *indio_dev, int *val)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+
+	*val = info->data->temp_scale;
+
+	return 0;
+}
+
+static int sun4i_gpadc_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan, int *val,
+				int *val2, long mask)
+{
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_OFFSET:
+		ret = sun4i_gpadc_temp_offset(indio_dev, val);
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_RAW:
+		if (chan->type == IIO_VOLTAGE)
+			ret = sun4i_gpadc_adc_read(indio_dev, chan->channel,
+						   val);
+		else
+			ret = sun4i_gpadc_temp_read(indio_dev, val);
+
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type == IIO_VOLTAGE) {
+			/* 3000mV / 4096 * raw */
+			*val = 0;
+			*val2 = 732421875;
+			return IIO_VAL_INT_PLUS_NANO;
+		}
+
+		ret = sun4i_gpadc_temp_scale(indio_dev, val);
+		if (ret)
+			return ret;
+
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info sun4i_gpadc_iio_info = {
+	.read_raw = sun4i_gpadc_read_raw,
+};
+
+static irqreturn_t sun4i_gpadc_temp_data_irq_handler(int irq, void *dev_id)
+{
+	struct sun4i_gpadc_iio *info = dev_id;
+
+	if (atomic_read(&info->ignore_temp_data_irq))
+		goto out;
+
+	if (!regmap_read(info->regmap, SUN4I_GPADC_TEMP_DATA, &info->temp_data))
+		complete(&info->completion);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sun4i_gpadc_fifo_data_irq_handler(int irq, void *dev_id)
+{
+	struct sun4i_gpadc_iio *info = dev_id;
+
+	if (atomic_read(&info->ignore_fifo_data_irq))
+		goto out;
+
+	if (!regmap_read(info->regmap, SUN4I_GPADC_DATA, &info->adc_data))
+		complete(&info->completion);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int sun4i_gpadc_runtime_suspend(struct device *dev)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+
+	/* Disable the ADC on IP */
+	regmap_write(info->regmap, SUN4I_GPADC_CTRL1, 0);
+	/* Disable temperature sensor on IP */
+	regmap_write(info->regmap, SUN4I_GPADC_TPR, 0);
+
+	return 0;
+}
+
+static int sun4i_gpadc_runtime_resume(struct device *dev)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(dev));
+
+	/* clkin = 6MHz */
+	regmap_write(info->regmap, SUN4I_GPADC_CTRL0,
+		     SUN4I_GPADC_CTRL0_ADC_CLK_DIVIDER(2) |
+		     SUN4I_GPADC_CTRL0_FS_DIV(7) |
+		     SUN4I_GPADC_CTRL0_T_ACQ(63));
+	regmap_write(info->regmap, SUN4I_GPADC_CTRL1, info->data->tp_mode_en);
+	regmap_write(info->regmap, SUN4I_GPADC_CTRL3,
+		     SUN4I_GPADC_CTRL3_FILTER_EN |
+		     SUN4I_GPADC_CTRL3_FILTER_TYPE(1));
+	/* period = SUN4I_GPADC_TPR_TEMP_PERIOD * 256 * 16 / clkin; ~0.6s */
+	regmap_write(info->regmap, SUN4I_GPADC_TPR,
+		     SUN4I_GPADC_TPR_TEMP_ENABLE |
+		     SUN4I_GPADC_TPR_TEMP_PERIOD(800));
+
+	return 0;
+}
+
+static int sun4i_gpadc_get_temp(void *data, int *temp)
+{
+	struct sun4i_gpadc_iio *info = data;
+	int val, scale, offset;
+
+	if (sun4i_gpadc_temp_read(info->indio_dev, &val))
+		return -ETIMEDOUT;
+
+	sun4i_gpadc_temp_scale(info->indio_dev, &scale);
+	sun4i_gpadc_temp_offset(info->indio_dev, &offset);
+
+	*temp = (val + offset) * scale;
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops sun4i_ts_tz_ops = {
+	.get_temp = &sun4i_gpadc_get_temp,
+};
+
+static const struct dev_pm_ops sun4i_gpadc_pm_ops = {
+	.runtime_suspend = &sun4i_gpadc_runtime_suspend,
+	.runtime_resume = &sun4i_gpadc_runtime_resume,
+};
+
+static int sun4i_irq_init(struct platform_device *pdev, const char *name,
+			  irq_handler_t handler, const char *devname,
+			  unsigned int *irq, atomic_t *atomic)
+{
+	int ret;
+	struct sun4i_gpadc_dev *mfd_dev = dev_get_drvdata(pdev->dev.parent);
+	struct sun4i_gpadc_iio *info = iio_priv(dev_get_drvdata(&pdev->dev));
+
+	/*
+	 * Once the interrupt is activated, the IP continuously performs
+	 * conversions thus throws interrupts. The interrupt is activated right
+	 * after being requested but we want to control when these interrupts
+	 * occur thus we disable it right after being requested. However, an
+	 * interrupt might occur between these two instructions and we have to
+	 * make sure that does not happen, by using atomic flags. We set the
+	 * flag before requesting the interrupt and unset it right after
+	 * disabling the interrupt. When an interrupt occurs between these two
+	 * instructions, reading the atomic flag will tell us to ignore the
+	 * interrupt.
+	 */
+	atomic_set(atomic, 1);
+
+	ret = platform_get_irq_byname(pdev, name);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_irq_get_virq(mfd_dev->regmap_irqc, ret);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to get virq for irq %s\n", name);
+		return ret;
+	}
+
+	*irq = ret;
+	ret = devm_request_any_context_irq(&pdev->dev, *irq, handler, 0,
+					   devname, info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not request %s interrupt: %d\n",
+			name, ret);
+		return ret;
+	}
+
+	disable_irq(*irq);
+	atomic_set(atomic, 0);
+
+	return 0;
+}
+
+static const struct of_device_id sun4i_gpadc_of_id[] = {
+	{
+		.compatible = "allwinner,sun8i-a33-ths",
+		.data = &sun8i_a33_gpadc_data,
+	},
+	{ /* sentinel */ }
+};
+
+static int sun4i_gpadc_probe_dt(struct platform_device *pdev,
+				struct iio_dev *indio_dev)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+	void __iomem *base;
+	int ret;
+
+	info->data = of_device_get_match_data(&pdev->dev);
+	if (!info->data)
+		return -ENODEV;
+
+	info->no_irq = true;
+	indio_dev->num_channels = ARRAY_SIZE(sun8i_a33_gpadc_channels);
+	indio_dev->channels = sun8i_a33_gpadc_channels;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	info->regmap = devm_regmap_init_mmio(&pdev->dev, base,
+					     &sun4i_gpadc_regmap_config);
+	if (IS_ERR(info->regmap)) {
+		ret = PTR_ERR(info->regmap);
+		dev_err(&pdev->dev, "failed to init regmap: %d\n", ret);
+		return ret;
+	}
+
+	if (IS_ENABLED(CONFIG_THERMAL_OF))
+		info->sensor_device = &pdev->dev;
+
+	return 0;
+}
+
+static int sun4i_gpadc_probe_mfd(struct platform_device *pdev,
+				 struct iio_dev *indio_dev)
+{
+	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+	struct sun4i_gpadc_dev *sun4i_gpadc_dev =
+		dev_get_drvdata(pdev->dev.parent);
+	int ret;
+
+	info->no_irq = false;
+	info->regmap = sun4i_gpadc_dev->regmap;
+
+	indio_dev->num_channels = ARRAY_SIZE(sun4i_gpadc_channels);
+	indio_dev->channels = sun4i_gpadc_channels;
+
+	info->data = (struct gpadc_data *)platform_get_device_id(pdev)->driver_data;
+
+	/*
+	 * Since the controller needs to be in touchscreen mode for its thermal
+	 * sensor to operate properly, and that switching between the two modes
+	 * needs a delay, always registering in the thermal framework will
+	 * significantly slow down the conversion rate of the ADCs.
+	 *
+	 * Therefore, instead of depending on THERMAL_OF in Kconfig, we only
+	 * register the sensor if that option is enabled, eventually leaving
+	 * that choice to the user.
+	 */
+
+	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
+		/*
+		 * This driver is a child of an MFD which has a node in the DT
+		 * but not its children, because of DT backward compatibility
+		 * for A10, A13 and A31 SoCs. Therefore, the resulting devices
+		 * of this driver do not have an of_node variable.
+		 * However, its parent (the MFD driver) has an of_node variable
+		 * and since devm_thermal_zone_of_sensor_register uses its first
+		 * argument to match the phandle defined in the node of the
+		 * thermal driver with the of_node of the device passed as first
+		 * argument and the third argument to call ops from
+		 * thermal_zone_of_device_ops, the solution is to use the parent
+		 * device as first argument to match the phandle with its
+		 * of_node, and the device from this driver as third argument to
+		 * return the temperature.
+		 */
+		info->sensor_device = pdev->dev.parent;
+	} else {
+		indio_dev->num_channels =
+			ARRAY_SIZE(sun4i_gpadc_channels_no_temp);
+		indio_dev->channels = sun4i_gpadc_channels_no_temp;
+	}
+
+	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
+		ret = sun4i_irq_init(pdev, "TEMP_DATA_PENDING",
+				     sun4i_gpadc_temp_data_irq_handler,
+				     "temp_data", &info->temp_data_irq,
+				     &info->ignore_temp_data_irq);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = sun4i_irq_init(pdev, "FIFO_DATA_PENDING",
+			     sun4i_gpadc_fifo_data_irq_handler, "fifo_data",
+			     &info->fifo_data_irq, &info->ignore_fifo_data_irq);
+	if (ret < 0)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
+		ret = iio_map_array_register(indio_dev, sun4i_gpadc_hwmon_maps);
+		if (ret < 0) {
+			dev_err(&pdev->dev,
+				"failed to register iio map array\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int sun4i_gpadc_probe(struct platform_device *pdev)
+{
+	struct sun4i_gpadc_iio *info;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	info = iio_priv(indio_dev);
+	platform_set_drvdata(pdev, indio_dev);
+
+	mutex_init(&info->mutex);
+	info->indio_dev = indio_dev;
+	init_completion(&info->completion);
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->info = &sun4i_gpadc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	if (pdev->dev.of_node)
+		ret = sun4i_gpadc_probe_dt(pdev, indio_dev);
+	else
+		ret = sun4i_gpadc_probe_mfd(pdev, indio_dev);
+
+	if (ret)
+		return ret;
+
+	pm_runtime_set_autosuspend_delay(&pdev->dev,
+					 SUN4I_GPADC_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	if (IS_ENABLED(CONFIG_THERMAL_OF)) {
+		info->tzd = thermal_zone_of_sensor_register(info->sensor_device,
+							    0, info,
+							    &sun4i_ts_tz_ops);
+		/*
+		 * Do not fail driver probing when failing to register in
+		 * thermal because no thermal DT node is found.
+		 */
+		if (IS_ERR(info->tzd) && PTR_ERR(info->tzd) != -ENODEV) {
+			dev_err(&pdev->dev,
+				"could not register thermal sensor: %ld\n",
+				PTR_ERR(info->tzd));
+			return PTR_ERR(info->tzd);
+		}
+	}
+
+	ret = devm_iio_device_register(&pdev->dev, indio_dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "could not register the device\n");
+		goto err_map;
+	}
+
+	return 0;
+
+err_map:
+	if (!info->no_irq && IS_ENABLED(CONFIG_THERMAL_OF))
+		iio_map_array_unregister(indio_dev);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	return ret;
+}
+
+static int sun4i_gpadc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct sun4i_gpadc_iio *info = iio_priv(indio_dev);
+
+	pm_runtime_put(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	if (!IS_ENABLED(CONFIG_THERMAL_OF))
+		return 0;
+
+	thermal_zone_of_sensor_unregister(info->sensor_device, info->tzd);
+
+	if (!info->no_irq)
+		iio_map_array_unregister(indio_dev);
+
+	return 0;
+}
+
+static const struct platform_device_id sun4i_gpadc_id[] = {
+	{ "sun4i-a10-gpadc-iio", (kernel_ulong_t)&sun4i_gpadc_data },
+	{ "sun5i-a13-gpadc-iio", (kernel_ulong_t)&sun5i_gpadc_data },
+	{ "sun6i-a31-gpadc-iio", (kernel_ulong_t)&sun6i_gpadc_data },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, sun4i_gpadc_id);
+
+static struct platform_driver sun4i_gpadc_driver = {
+	.driver = {
+		.name = "sun4i-gpadc-iio",
+		.of_match_table = sun4i_gpadc_of_id,
+		.pm = &sun4i_gpadc_pm_ops,
+	},
+	.id_table = sun4i_gpadc_id,
+	.probe = sun4i_gpadc_probe,
+	.remove = sun4i_gpadc_remove,
+};
+MODULE_DEVICE_TABLE(of, sun4i_gpadc_of_id);
+
+module_platform_driver(sun4i_gpadc_driver);
+
+MODULE_DESCRIPTION("ADC driver for sunxi platforms");
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
+MODULE_LICENSE("GPL v2");