Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 589 insertions, 0 deletions

diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
new file mode 100644
index 000000000..97642ebd9
--- /dev/null
+++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c
@@ -0,0 +1,589 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include "../common/hid-sensors/hid-sensor-trigger.h"
+
+enum magn_3d_channel {
+	CHANNEL_SCAN_INDEX_X,
+	CHANNEL_SCAN_INDEX_Y,
+	CHANNEL_SCAN_INDEX_Z,
+	CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP,
+	CHANNEL_SCAN_INDEX_NORTH_TRUE_TILT_COMP,
+	CHANNEL_SCAN_INDEX_NORTH_MAGN,
+	CHANNEL_SCAN_INDEX_NORTH_TRUE,
+	MAGN_3D_CHANNEL_MAX,
+};
+
+struct common_attributes {
+	int scale_pre_decml;
+	int scale_post_decml;
+	int scale_precision;
+	int value_offset;
+};
+
+struct magn_3d_state {
+	struct hid_sensor_hub_callbacks callbacks;
+	struct hid_sensor_common magn_flux_attributes;
+	struct hid_sensor_common rot_attributes;
+	struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX];
+
+	/* dynamically sized array to hold sensor values */
+	u32 *iio_vals;
+	/* array of pointers to sensor value */
+	u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX];
+
+	struct common_attributes magn_flux_attr;
+	struct common_attributes rot_attr;
+};
+
+static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = {
+	HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS,
+	HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS,
+	HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS,
+	HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
+	HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH,
+	HID_USAGE_SENSOR_ORIENT_MAGN_NORTH,
+	HID_USAGE_SENSOR_ORIENT_TRUE_NORTH,
+};
+
+/* Channel definitions */
+static const struct iio_chan_spec magn_3d_channels[] = {
+	{
+		.type = IIO_MAGN,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+	}, {
+		.type = IIO_MAGN,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+	}, {
+		.type = IIO_MAGN,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+	}, {
+		.type = IIO_ROT,
+		.modified = 1,
+		.channel2 = IIO_MOD_NORTH_MAGN_TILT_COMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+	}, {
+		.type = IIO_ROT,
+		.modified = 1,
+		.channel2 = IIO_MOD_NORTH_TRUE_TILT_COMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+	}, {
+		.type = IIO_ROT,
+		.modified = 1,
+		.channel2 = IIO_MOD_NORTH_MAGN,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+	}, {
+		.type = IIO_ROT,
+		.modified = 1,
+		.channel2 = IIO_MOD_NORTH_TRUE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+	}
+};
+
+/* Adjust channel real bits based on report descriptor */
+static void magn_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
+						int channel, int size)
+{
+	channels[channel].scan_type.sign = 's';
+	/* Real storage bits will change based on the report desc. */
+	channels[channel].scan_type.realbits = size * 8;
+	/* Maximum size of a sample to capture is u32 */
+	channels[channel].scan_type.storagebits = sizeof(u32) * 8;
+}
+
+/* Channel read_raw handler */
+static int magn_3d_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2,
+			      long mask)
+{
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
+	int report_id = -1;
+	u32 address;
+	int ret_type;
+	s32 min;
+
+	*val = 0;
+	*val2 = 0;
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		hid_sensor_power_state(&magn_state->magn_flux_attributes, true);
+		report_id = magn_state->magn[chan->address].report_id;
+		min = magn_state->magn[chan->address].logical_minimum;
+		address = magn_3d_addresses[chan->address];
+		if (report_id >= 0)
+			*val = sensor_hub_input_attr_get_raw_value(
+				magn_state->magn_flux_attributes.hsdev,
+				HID_USAGE_SENSOR_COMPASS_3D, address,
+				report_id,
+				SENSOR_HUB_SYNC,
+				min < 0);
+		else {
+			*val = 0;
+			hid_sensor_power_state(
+				&magn_state->magn_flux_attributes,
+				false);
+			return -EINVAL;
+		}
+		hid_sensor_power_state(&magn_state->magn_flux_attributes,
+					false);
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_MAGN:
+			*val = magn_state->magn_flux_attr.scale_pre_decml;
+			*val2 = magn_state->magn_flux_attr.scale_post_decml;
+			ret_type = magn_state->magn_flux_attr.scale_precision;
+			break;
+		case IIO_ROT:
+			*val = magn_state->rot_attr.scale_pre_decml;
+			*val2 = magn_state->rot_attr.scale_post_decml;
+			ret_type = magn_state->rot_attr.scale_precision;
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->type) {
+		case IIO_MAGN:
+			*val = magn_state->magn_flux_attr.value_offset;
+			ret_type = IIO_VAL_INT;
+			break;
+		case IIO_ROT:
+			*val = magn_state->rot_attr.value_offset;
+			ret_type = IIO_VAL_INT;
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret_type = hid_sensor_read_samp_freq_value(
+			&magn_state->magn_flux_attributes, val, val2);
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		switch (chan->type) {
+		case IIO_MAGN:
+			ret_type = hid_sensor_read_raw_hyst_value(
+				&magn_state->magn_flux_attributes, val, val2);
+			break;
+		case IIO_ROT:
+			ret_type = hid_sensor_read_raw_hyst_value(
+				&magn_state->rot_attributes, val, val2);
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
+		break;
+	default:
+		ret_type = -EINVAL;
+		break;
+	}
+
+	return ret_type;
+}
+
+/* Channel write_raw handler */
+static int magn_3d_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_write_samp_freq_value(
+				&magn_state->magn_flux_attributes, val, val2);
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		switch (chan->type) {
+		case IIO_MAGN:
+			ret = hid_sensor_write_raw_hyst_value(
+				&magn_state->magn_flux_attributes, val, val2);
+			break;
+		case IIO_ROT:
+			ret = hid_sensor_write_raw_hyst_value(
+				&magn_state->rot_attributes, val, val2);
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct iio_info magn_3d_info = {
+	.read_raw = &magn_3d_read_raw,
+	.write_raw = &magn_3d_write_raw,
+};
+
+/* Function to push data to buffer */
+static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data)
+{
+	dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
+	iio_push_to_buffers(indio_dev, data);
+}
+
+/* Callback handler to send event after all samples are received and captured */
+static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
+
+	dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n");
+	if (atomic_read(&magn_state->magn_flux_attributes.data_ready))
+		hid_sensor_push_data(indio_dev, magn_state->iio_vals);
+
+	return 0;
+}
+
+/* Capture samples in local storage */
+static int magn_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				size_t raw_len, char *raw_data,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
+	int offset;
+	int ret = 0;
+	u32 *iio_val = NULL;
+
+	switch (usage_id) {
+	case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS:
+	case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS:
+	case HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS:
+		offset = (usage_id - HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS)
+				+ CHANNEL_SCAN_INDEX_X;
+	break;
+	case HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH:
+	case HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH:
+	case HID_USAGE_SENSOR_ORIENT_MAGN_NORTH:
+	case HID_USAGE_SENSOR_ORIENT_TRUE_NORTH:
+		offset = (usage_id - HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH)
+				+ CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP;
+	break;
+	default:
+		return -EINVAL;
+	}
+
+	iio_val = magn_state->magn_val_addr[offset];
+
+	if (iio_val != NULL)
+		*iio_val = *((u32 *)raw_data);
+	else
+		ret = -EINVAL;
+
+	return ret;
+}
+
+/* Parse report which is specific to an usage id*/
+static int magn_3d_parse_report(struct platform_device *pdev,
+				struct hid_sensor_hub_device *hsdev,
+				struct iio_chan_spec **channels,
+				int *chan_count,
+				unsigned usage_id,
+				struct magn_3d_state *st)
+{
+	int i;
+	int attr_count = 0;
+	struct iio_chan_spec *_channels;
+
+	/* Scan for each usage attribute supported */
+	for (i = 0; i < MAGN_3D_CHANNEL_MAX; i++) {
+		int status;
+		u32 address = magn_3d_addresses[i];
+
+		/* Check if usage attribute exists in the sensor hub device */
+		status = sensor_hub_input_get_attribute_info(hsdev,
+			HID_INPUT_REPORT,
+			usage_id,
+			address,
+			&(st->magn[i]));
+		if (!status)
+			attr_count++;
+	}
+
+	if (attr_count <= 0) {
+		dev_err(&pdev->dev,
+			"failed to find any supported usage attributes in report\n");
+		return  -EINVAL;
+	}
+
+	dev_dbg(&pdev->dev, "magn_3d Found %d usage attributes\n",
+			attr_count);
+	dev_dbg(&pdev->dev, "magn_3d X: %x:%x Y: %x:%x Z: %x:%x\n",
+			st->magn[0].index,
+			st->magn[0].report_id,
+			st->magn[1].index, st->magn[1].report_id,
+			st->magn[2].index, st->magn[2].report_id);
+
+	/* Setup IIO channel array */
+	_channels = devm_kcalloc(&pdev->dev, attr_count,
+				sizeof(struct iio_chan_spec),
+				GFP_KERNEL);
+	if (!_channels) {
+		dev_err(&pdev->dev,
+			"failed to allocate space for iio channels\n");
+		return -ENOMEM;
+	}
+
+	st->iio_vals = devm_kcalloc(&pdev->dev, attr_count,
+				sizeof(u32),
+				GFP_KERNEL);
+	if (!st->iio_vals) {
+		dev_err(&pdev->dev,
+			"failed to allocate space for iio values array\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0, *chan_count = 0;
+	i < MAGN_3D_CHANNEL_MAX && *chan_count < attr_count;
+	i++){
+		if (st->magn[i].index >= 0) {
+			/* Setup IIO channel struct */
+			(_channels[*chan_count]) = magn_3d_channels[i];
+			(_channels[*chan_count]).scan_index = *chan_count;
+			(_channels[*chan_count]).address = i;
+
+			/* Set magn_val_addr to iio value address */
+			st->magn_val_addr[i] = &(st->iio_vals[*chan_count]);
+			magn_3d_adjust_channel_bit_mask(_channels,
+							*chan_count,
+							st->magn[i].size);
+			(*chan_count)++;
+		}
+	}
+
+	if (*chan_count <= 0) {
+		dev_err(&pdev->dev,
+			"failed to find any magnetic channels setup\n");
+		return -EINVAL;
+	}
+
+	*channels = _channels;
+
+	dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n",
+			*chan_count);
+
+	st->magn_flux_attr.scale_precision = hid_sensor_format_scale(
+				HID_USAGE_SENSOR_COMPASS_3D,
+				&st->magn[CHANNEL_SCAN_INDEX_X],
+				&st->magn_flux_attr.scale_pre_decml,
+				&st->magn_flux_attr.scale_post_decml);
+	st->rot_attr.scale_precision
+		= hid_sensor_format_scale(
+			HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
+			&st->magn[CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP],
+			&st->rot_attr.scale_pre_decml,
+			&st->rot_attr.scale_post_decml);
+
+	/* Set Sensitivity field ids, when there is no individual modifier */
+	if (st->magn_flux_attributes.sensitivity.index < 0) {
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_DATA_ORIENTATION,
+			&st->magn_flux_attributes.sensitivity);
+		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+			st->magn_flux_attributes.sensitivity.index,
+			st->magn_flux_attributes.sensitivity.report_id);
+	}
+	if (st->magn_flux_attributes.sensitivity.index < 0) {
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_ORIENT_MAGN_FLUX,
+			&st->magn_flux_attributes.sensitivity);
+		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+			st->magn_flux_attributes.sensitivity.index,
+			st->magn_flux_attributes.sensitivity.report_id);
+	}
+	if (st->rot_attributes.sensitivity.index < 0) {
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
+			&st->rot_attributes.sensitivity);
+		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+			st->rot_attributes.sensitivity.index,
+			st->rot_attributes.sensitivity.report_id);
+	}
+
+	return 0;
+}
+
+/* Function to initialize the processing for usage id */
+static int hid_magn_3d_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	static char *name = "magn_3d";
+	struct iio_dev *indio_dev;
+	struct magn_3d_state *magn_state;
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_chan_spec *channels;
+	int chan_count = 0;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev,
+					  sizeof(struct magn_3d_state));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	magn_state = iio_priv(indio_dev);
+	magn_state->magn_flux_attributes.hsdev = hsdev;
+	magn_state->magn_flux_attributes.pdev = pdev;
+
+	ret = hid_sensor_parse_common_attributes(hsdev,
+				HID_USAGE_SENSOR_COMPASS_3D,
+				&magn_state->magn_flux_attributes);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup common attributes\n");
+		return ret;
+	}
+	magn_state->rot_attributes = magn_state->magn_flux_attributes;
+
+	ret = magn_3d_parse_report(pdev, hsdev,
+				&channels, &chan_count,
+				HID_USAGE_SENSOR_COMPASS_3D, magn_state);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to parse report\n");
+		return ret;
+	}
+
+	indio_dev->channels = channels;
+	indio_dev->num_channels = chan_count;
+	indio_dev->info = &magn_3d_info;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	atomic_set(&magn_state->magn_flux_attributes.data_ready, 0);
+
+	ret = hid_sensor_setup_trigger(indio_dev, name,
+					&magn_state->magn_flux_attributes);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "trigger setup failed\n");
+		return ret;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "device register failed\n");
+		goto error_remove_trigger;
+	}
+
+	magn_state->callbacks.send_event = magn_3d_proc_event;
+	magn_state->callbacks.capture_sample = magn_3d_capture_sample;
+	magn_state->callbacks.pdev = pdev;
+	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D,
+					&magn_state->callbacks);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "callback reg failed\n");
+		goto error_iio_unreg;
+	}
+
+	return ret;
+
+error_iio_unreg:
+	iio_device_unregister(indio_dev);
+error_remove_trigger:
+	hid_sensor_remove_trigger(indio_dev, &magn_state->magn_flux_attributes);
+	return ret;
+}
+
+/* Function to deinitialize the processing for usage id */
+static int hid_magn_3d_remove(struct platform_device *pdev)
+{
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct magn_3d_state *magn_state = iio_priv(indio_dev);
+
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
+	iio_device_unregister(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &magn_state->magn_flux_attributes);
+
+	return 0;
+}
+
+static const struct platform_device_id hid_magn_3d_ids[] = {
+	{
+		/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
+		.name = "HID-SENSOR-200083",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, hid_magn_3d_ids);
+
+static struct platform_driver hid_magn_3d_platform_driver = {
+	.id_table = hid_magn_3d_ids,
+	.driver = {
+		.name	= KBUILD_MODNAME,
+		.pm	= &hid_sensor_pm_ops,
+	},
+	.probe		= hid_magn_3d_probe,
+	.remove		= hid_magn_3d_remove,
+};
+module_platform_driver(hid_magn_3d_platform_driver);
+
+MODULE_DESCRIPTION("HID Sensor Magnetometer 3D");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_LICENSE("GPL");