Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

13 files changed, 5845 insertions, 0 deletions

diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
new file mode 100644
index 000000000..4df60082c
--- /dev/null
+++ b/drivers/iio/temperature/Kconfig
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Temperature sensor drivers
+#
+menu "Temperature sensors"
+
+config IQS620AT_TEMP
+	tristate "Azoteq IQS620AT temperature sensor"
+	depends on MFD_IQS62X || COMPILE_TEST
+	help
+	  Say Y here if you want to build support for the Azoteq IQS620AT
+	  temperature sensor.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called iqs620at-temp.
+
+config LTC2983
+	tristate "Analog Devices Multi-Sensor Digital Temperature Measurement System"
+	depends on SPI
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for the LTC2983 Multi-Sensor
+	  high accuracy digital temperature measurement system.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ltc2983.
+
+config MAXIM_THERMOCOUPLE
+	tristate "Maxim thermocouple sensors"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  If you say yes here you get support for the Maxim series of
+	  thermocouple sensors connected via SPI.
+
+	  Supported sensors:
+	   * MAX6675
+	   * MAX31855
+
+	  This driver can also be built as a module. If so, the module will
+	  be called maxim_thermocouple.
+
+config HID_SENSOR_TEMP
+	tristate "HID Environmental temperature sensor"
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
+	help
+	  Say yes here to build support for the HID SENSOR
+	  temperature driver
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called hid-sensor-temperature.
+
+config MLX90614
+	tristate "MLX90614 contact-less infrared sensor"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Melexis
+	  MLX90614 contact-less infrared sensor connected with I2C.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mlx90614.
+
+config MLX90632
+	tristate "MLX90632 contact-less infrared sensor with medical accuracy"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the Melexis
+	  MLX90632 contact-less infrared sensor with medical accuracy
+	  connected with I2C.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mlx90632.
+
+config TMP006
+	tristate "TMP006 infrared thermopile sensor"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Texas Instruments
+	  TMP006 infrared thermopile sensor.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tmp006.
+
+config TMP007
+	tristate "TMP007 infrared thermopile sensor with Integrated Math Engine"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Texas Instruments
+	  TMP007 infrared thermopile sensor with Integrated Math Engine.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tmp007.
+
+config TSYS01
+	tristate "Measurement Specialties TSYS01 temperature sensor using I2C bus connection"
+	depends on I2C
+	select IIO_MS_SENSORS_I2C
+	help
+	  If you say yes here you get support for the Measurement Specialties
+	  TSYS01 I2C temperature sensor.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tsys01.
+
+config TSYS02D
+	tristate "Measurement Specialties TSYS02D temperature sensor"
+	depends on I2C
+	select IIO_MS_SENSORS_I2C
+	help
+	  If you say yes here you get support for the Measurement Specialties
+	  TSYS02D temperature sensor.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tsys02d.
+
+config MAX31856
+	tristate "MAX31856 thermocouple sensor"
+	depends on SPI
+	help
+	  If you say yes here you get support for MAX31856
+	  thermocouple sensor chip connected via SPI.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called max31856.
+
+endmenu
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
new file mode 100644
index 000000000..90c113115
--- /dev/null
+++ b/drivers/iio/temperature/Makefile
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for industrial I/O temperature drivers
+#
+
+obj-$(CONFIG_IQS620AT_TEMP) += iqs620at-temp.o
+obj-$(CONFIG_LTC2983) += ltc2983.o
+obj-$(CONFIG_HID_SENSOR_TEMP) += hid-sensor-temperature.o
+obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o
+obj-$(CONFIG_MAX31856) += max31856.o
+obj-$(CONFIG_MLX90614) += mlx90614.o
+obj-$(CONFIG_MLX90632) += mlx90632.o
+obj-$(CONFIG_TMP006) += tmp006.o
+obj-$(CONFIG_TMP007) += tmp007.o
+obj-$(CONFIG_TSYS01) += tsys01.o
+obj-$(CONFIG_TSYS02D) += tsys02d.o
diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c
new file mode 100644
index 000000000..da9a24709
--- /dev/null
+++ b/drivers/iio/temperature/hid-sensor-temperature.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2017, Intel Corporation.
+ */
+#include <linux/device.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "../common/hid-sensors/hid-sensor-trigger.h"
+
+struct temperature_state {
+	struct hid_sensor_common common_attributes;
+	struct hid_sensor_hub_attribute_info temperature_attr;
+	struct {
+		s32 temperature_data;
+		u64 timestamp __aligned(8);
+	} scan;
+	int scale_pre_decml;
+	int scale_post_decml;
+	int scale_precision;
+	int value_offset;
+};
+
+/* Channel definitions */
+static const struct iio_chan_spec temperature_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+			BIT(IIO_CHAN_INFO_HYSTERESIS),
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+/* Adjust channel real bits based on report descriptor */
+static void temperature_adjust_channel_bit_mask(struct iio_chan_spec *channels,
+					int channel, int size)
+{
+	channels[channel].scan_type.sign = 's';
+	/* Real storage bits will change based on the report desc. */
+	channels[channel].scan_type.realbits = size * 8;
+	/* Maximum size of a sample to capture is s32 */
+	channels[channel].scan_type.storagebits = sizeof(s32) * 8;
+}
+
+static int temperature_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct temperature_state *temp_st = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (chan->type != IIO_TEMP)
+			return -EINVAL;
+		hid_sensor_power_state(
+			&temp_st->common_attributes, true);
+		*val = sensor_hub_input_attr_get_raw_value(
+			temp_st->common_attributes.hsdev,
+			HID_USAGE_SENSOR_TEMPERATURE,
+			HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE,
+			temp_st->temperature_attr.report_id,
+			SENSOR_HUB_SYNC,
+			temp_st->temperature_attr.logical_minimum < 0);
+		hid_sensor_power_state(
+				&temp_st->common_attributes,
+				false);
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = temp_st->scale_pre_decml;
+		*val2 = temp_st->scale_post_decml;
+		return temp_st->scale_precision;
+
+	case IIO_CHAN_INFO_OFFSET:
+		*val = temp_st->value_offset;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return hid_sensor_read_samp_freq_value(
+				&temp_st->common_attributes, val, val2);
+
+	case IIO_CHAN_INFO_HYSTERESIS:
+		return hid_sensor_read_raw_hyst_value(
+				&temp_st->common_attributes, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int temperature_write_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int val, int val2, long mask)
+{
+	struct temperature_state *temp_st = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return hid_sensor_write_samp_freq_value(
+				&temp_st->common_attributes, val, val2);
+	case IIO_CHAN_INFO_HYSTERESIS:
+		return hid_sensor_write_raw_hyst_value(
+				&temp_st->common_attributes, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info temperature_info = {
+	.read_raw = &temperature_read_raw,
+	.write_raw = &temperature_write_raw,
+};
+
+/* Callback handler to send event after all samples are received and captured */
+static int temperature_proc_event(struct hid_sensor_hub_device *hsdev,
+				unsigned int usage_id, void *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct temperature_state *temp_st = iio_priv(indio_dev);
+
+	if (atomic_read(&temp_st->common_attributes.data_ready))
+		iio_push_to_buffers_with_timestamp(indio_dev, &temp_st->scan,
+						   iio_get_time_ns(indio_dev));
+
+	return 0;
+}
+
+/* Capture samples in local storage */
+static int temperature_capture_sample(struct hid_sensor_hub_device *hsdev,
+				unsigned int usage_id, size_t raw_len,
+				char *raw_data, void *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct temperature_state *temp_st = iio_priv(indio_dev);
+
+	switch (usage_id) {
+	case HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE:
+		temp_st->scan.temperature_data = *(s32 *)raw_data;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+/* Parse report which is specific to an usage id*/
+static int temperature_parse_report(struct platform_device *pdev,
+				struct hid_sensor_hub_device *hsdev,
+				struct iio_chan_spec *channels,
+				unsigned int usage_id,
+				struct temperature_state *st)
+{
+	int ret;
+
+	ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
+			usage_id,
+			HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE,
+			&st->temperature_attr);
+	if (ret < 0)
+		return ret;
+
+	temperature_adjust_channel_bit_mask(channels, 0,
+					st->temperature_attr.size);
+
+	st->scale_precision = hid_sensor_format_scale(
+				HID_USAGE_SENSOR_TEMPERATURE,
+				&st->temperature_attr,
+				&st->scale_pre_decml, &st->scale_post_decml);
+
+	/* Set Sensitivity field ids, when there is no individual modifier */
+	if (st->common_attributes.sensitivity.index < 0)
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE,
+			&st->common_attributes.sensitivity);
+
+	return ret;
+}
+
+static struct hid_sensor_hub_callbacks temperature_callbacks = {
+	.send_event = &temperature_proc_event,
+	.capture_sample = &temperature_capture_sample,
+};
+
+/* Function to initialize the processing for usage id */
+static int hid_temperature_probe(struct platform_device *pdev)
+{
+	static const char *name = "temperature";
+	struct iio_dev *indio_dev;
+	struct temperature_state *temp_st;
+	struct iio_chan_spec *temp_chans;
+	struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev);
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*temp_st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	temp_st = iio_priv(indio_dev);
+	temp_st->common_attributes.hsdev = hsdev;
+	temp_st->common_attributes.pdev = pdev;
+
+	ret = hid_sensor_parse_common_attributes(hsdev,
+					HID_USAGE_SENSOR_TEMPERATURE,
+					&temp_st->common_attributes);
+	if (ret)
+		return ret;
+
+	temp_chans = devm_kmemdup(&indio_dev->dev, temperature_channels,
+				sizeof(temperature_channels), GFP_KERNEL);
+	if (!temp_chans)
+		return -ENOMEM;
+
+	ret = temperature_parse_report(pdev, hsdev, temp_chans,
+				HID_USAGE_SENSOR_TEMPERATURE, temp_st);
+	if (ret)
+		return ret;
+
+	indio_dev->channels = temp_chans;
+	indio_dev->num_channels = ARRAY_SIZE(temperature_channels);
+	indio_dev->info = &temperature_info;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	atomic_set(&temp_st->common_attributes.data_ready, 0);
+
+	ret = hid_sensor_setup_trigger(indio_dev, name,
+				&temp_st->common_attributes);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	temperature_callbacks.pdev = pdev;
+	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE,
+					&temperature_callbacks);
+	if (ret)
+		goto error_remove_trigger;
+
+	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
+	if (ret)
+		goto error_remove_callback;
+
+	return ret;
+
+error_remove_callback:
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE);
+error_remove_trigger:
+	hid_sensor_remove_trigger(indio_dev, &temp_st->common_attributes);
+	return ret;
+}
+
+/* Function to deinitialize the processing for usage id */
+static int hid_temperature_remove(struct platform_device *pdev)
+{
+	struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct temperature_state *temp_st = iio_priv(indio_dev);
+
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_TEMPERATURE);
+	hid_sensor_remove_trigger(indio_dev, &temp_st->common_attributes);
+
+	return 0;
+}
+
+static const struct platform_device_id hid_temperature_ids[] = {
+	{
+		/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
+		.name = "HID-SENSOR-200033",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, hid_temperature_ids);
+
+static struct platform_driver hid_temperature_platform_driver = {
+	.id_table = hid_temperature_ids,
+	.driver = {
+		.name	= "temperature-sensor",
+		.pm	= &hid_sensor_pm_ops,
+	},
+	.probe		= hid_temperature_probe,
+	.remove		= hid_temperature_remove,
+};
+module_platform_driver(hid_temperature_platform_driver);
+
+MODULE_DESCRIPTION("HID Environmental temperature sensor");
+MODULE_AUTHOR("Song Hongyan <hongyan.song@intel.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/temperature/iqs620at-temp.c b/drivers/iio/temperature/iqs620at-temp.c
new file mode 100644
index 000000000..fe126e1fb
--- /dev/null
+++ b/drivers/iio/temperature/iqs620at-temp.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS620AT Temperature Sensor
+ *
+ * Copyright (C) 2019 Jeff LaBundy <jeff@labundy.com>
+ */
+
+#include <linux/device.h>
+#include <linux/iio/iio.h>
+#include <linux/kernel.h>
+#include <linux/mfd/iqs62x.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define IQS620_TEMP_UI_OUT			0x1A
+
+#define IQS620_TEMP_SCALE			1000
+#define IQS620_TEMP_OFFSET			(-100)
+
+static int iqs620_temp_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	struct iqs62x_core *iqs62x = iio_device_get_drvdata(indio_dev);
+	int ret;
+	__le16 val_buf;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_raw_read(iqs62x->regmap, IQS620_TEMP_UI_OUT,
+				      &val_buf, sizeof(val_buf));
+		if (ret)
+			return ret;
+
+		*val = le16_to_cpu(val_buf);
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = IQS620_TEMP_SCALE;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_OFFSET:
+		*val = IQS620_TEMP_OFFSET;
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info iqs620_temp_info = {
+	.read_raw = &iqs620_temp_read_raw,
+};
+
+static const struct iio_chan_spec iqs620_temp_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OFFSET),
+	},
+};
+
+static int iqs620_temp_probe(struct platform_device *pdev)
+{
+	struct iqs62x_core *iqs62x = dev_get_drvdata(pdev->dev.parent);
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, 0);
+	if (!indio_dev)
+		return -ENOMEM;
+
+	iio_device_set_drvdata(indio_dev, iqs62x);
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = iqs620_temp_channels;
+	indio_dev->num_channels = ARRAY_SIZE(iqs620_temp_channels);
+	indio_dev->name = iqs62x->dev_desc->dev_name;
+	indio_dev->info = &iqs620_temp_info;
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static struct platform_driver iqs620_temp_platform_driver = {
+	.driver = {
+		.name = "iqs620at-temp",
+	},
+	.probe = iqs620_temp_probe,
+};
+module_platform_driver(iqs620_temp_platform_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS620AT Temperature Sensor");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:iqs620at-temp");
diff --git a/drivers/iio/temperature/ltc2983.c b/drivers/iio/temperature/ltc2983.c
new file mode 100644
index 000000000..b2ae2d2c7
--- /dev/null
+++ b/drivers/iio/temperature/ltc2983.c
@@ -0,0 +1,1562 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System
+ * driver
+ *
+ * Copyright 2019 Analog Devices Inc.
+ */
+#include <linux/bitfield.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+/* register map */
+#define LTC2983_STATUS_REG			0x0000
+#define LTC2983_TEMP_RES_START_REG		0x0010
+#define LTC2983_TEMP_RES_END_REG		0x005F
+#define LTC2983_GLOBAL_CONFIG_REG		0x00F0
+#define LTC2983_MULT_CHANNEL_START_REG		0x00F4
+#define LTC2983_MULT_CHANNEL_END_REG		0x00F7
+#define LTC2983_MUX_CONFIG_REG			0x00FF
+#define LTC2983_CHAN_ASSIGN_START_REG		0x0200
+#define LTC2983_CHAN_ASSIGN_END_REG		0x024F
+#define LTC2983_CUST_SENS_TBL_START_REG		0x0250
+#define LTC2983_CUST_SENS_TBL_END_REG		0x03CF
+
+#define LTC2983_DIFFERENTIAL_CHAN_MIN		2
+#define LTC2983_MAX_CHANNELS_NR			20
+#define LTC2983_MIN_CHANNELS_NR			1
+#define LTC2983_SLEEP				0x97
+#define LTC2983_CUSTOM_STEINHART_SIZE		24
+#define LTC2983_CUSTOM_SENSOR_ENTRY_SZ		6
+#define LTC2983_CUSTOM_STEINHART_ENTRY_SZ	4
+
+#define LTC2983_CHAN_START_ADDR(chan) \
+			(((chan - 1) * 4) + LTC2983_CHAN_ASSIGN_START_REG)
+#define LTC2983_CHAN_RES_ADDR(chan) \
+			(((chan - 1) * 4) + LTC2983_TEMP_RES_START_REG)
+#define LTC2983_THERMOCOUPLE_DIFF_MASK		BIT(3)
+#define LTC2983_THERMOCOUPLE_SGL(x) \
+				FIELD_PREP(LTC2983_THERMOCOUPLE_DIFF_MASK, x)
+#define LTC2983_THERMOCOUPLE_OC_CURR_MASK	GENMASK(1, 0)
+#define LTC2983_THERMOCOUPLE_OC_CURR(x) \
+				FIELD_PREP(LTC2983_THERMOCOUPLE_OC_CURR_MASK, x)
+#define LTC2983_THERMOCOUPLE_OC_CHECK_MASK	BIT(2)
+#define LTC2983_THERMOCOUPLE_OC_CHECK(x) \
+			FIELD_PREP(LTC2983_THERMOCOUPLE_OC_CHECK_MASK, x)
+
+#define LTC2983_THERMISTOR_DIFF_MASK		BIT(2)
+#define LTC2983_THERMISTOR_SGL(x) \
+				FIELD_PREP(LTC2983_THERMISTOR_DIFF_MASK, x)
+#define LTC2983_THERMISTOR_R_SHARE_MASK		BIT(1)
+#define LTC2983_THERMISTOR_R_SHARE(x) \
+				FIELD_PREP(LTC2983_THERMISTOR_R_SHARE_MASK, x)
+#define LTC2983_THERMISTOR_C_ROTATE_MASK	BIT(0)
+#define LTC2983_THERMISTOR_C_ROTATE(x) \
+				FIELD_PREP(LTC2983_THERMISTOR_C_ROTATE_MASK, x)
+
+#define LTC2983_DIODE_DIFF_MASK			BIT(2)
+#define LTC2983_DIODE_SGL(x) \
+			FIELD_PREP(LTC2983_DIODE_DIFF_MASK, x)
+#define LTC2983_DIODE_3_CONV_CYCLE_MASK		BIT(1)
+#define LTC2983_DIODE_3_CONV_CYCLE(x) \
+				FIELD_PREP(LTC2983_DIODE_3_CONV_CYCLE_MASK, x)
+#define LTC2983_DIODE_AVERAGE_ON_MASK		BIT(0)
+#define LTC2983_DIODE_AVERAGE_ON(x) \
+				FIELD_PREP(LTC2983_DIODE_AVERAGE_ON_MASK, x)
+
+#define LTC2983_RTD_4_WIRE_MASK			BIT(3)
+#define LTC2983_RTD_ROTATION_MASK		BIT(1)
+#define LTC2983_RTD_C_ROTATE(x) \
+			FIELD_PREP(LTC2983_RTD_ROTATION_MASK, x)
+#define LTC2983_RTD_KELVIN_R_SENSE_MASK		GENMASK(3, 2)
+#define LTC2983_RTD_N_WIRES_MASK		GENMASK(3, 2)
+#define LTC2983_RTD_N_WIRES(x) \
+			FIELD_PREP(LTC2983_RTD_N_WIRES_MASK, x)
+#define LTC2983_RTD_R_SHARE_MASK		BIT(0)
+#define LTC2983_RTD_R_SHARE(x) \
+			FIELD_PREP(LTC2983_RTD_R_SHARE_MASK, 1)
+
+#define LTC2983_COMMON_HARD_FAULT_MASK	GENMASK(31, 30)
+#define LTC2983_COMMON_SOFT_FAULT_MASK	GENMASK(27, 25)
+
+#define	LTC2983_STATUS_START_MASK	BIT(7)
+#define	LTC2983_STATUS_START(x)		FIELD_PREP(LTC2983_STATUS_START_MASK, x)
+#define	LTC2983_STATUS_UP_MASK		GENMASK(7, 6)
+#define	LTC2983_STATUS_UP(reg)		FIELD_GET(LTC2983_STATUS_UP_MASK, reg)
+
+#define	LTC2983_STATUS_CHAN_SEL_MASK	GENMASK(4, 0)
+#define	LTC2983_STATUS_CHAN_SEL(x) \
+				FIELD_PREP(LTC2983_STATUS_CHAN_SEL_MASK, x)
+
+#define LTC2983_TEMP_UNITS_MASK		BIT(2)
+#define LTC2983_TEMP_UNITS(x)		FIELD_PREP(LTC2983_TEMP_UNITS_MASK, x)
+
+#define LTC2983_NOTCH_FREQ_MASK		GENMASK(1, 0)
+#define LTC2983_NOTCH_FREQ(x)		FIELD_PREP(LTC2983_NOTCH_FREQ_MASK, x)
+
+#define LTC2983_RES_VALID_MASK		BIT(24)
+#define LTC2983_DATA_MASK		GENMASK(23, 0)
+#define LTC2983_DATA_SIGN_BIT		23
+
+#define LTC2983_CHAN_TYPE_MASK		GENMASK(31, 27)
+#define LTC2983_CHAN_TYPE(x)		FIELD_PREP(LTC2983_CHAN_TYPE_MASK, x)
+
+/* cold junction for thermocouples and rsense for rtd's and thermistor's */
+#define LTC2983_CHAN_ASSIGN_MASK	GENMASK(26, 22)
+#define LTC2983_CHAN_ASSIGN(x)		FIELD_PREP(LTC2983_CHAN_ASSIGN_MASK, x)
+
+#define LTC2983_CUSTOM_LEN_MASK		GENMASK(5, 0)
+#define LTC2983_CUSTOM_LEN(x)		FIELD_PREP(LTC2983_CUSTOM_LEN_MASK, x)
+
+#define LTC2983_CUSTOM_ADDR_MASK	GENMASK(11, 6)
+#define LTC2983_CUSTOM_ADDR(x)		FIELD_PREP(LTC2983_CUSTOM_ADDR_MASK, x)
+
+#define LTC2983_THERMOCOUPLE_CFG_MASK	GENMASK(21, 18)
+#define LTC2983_THERMOCOUPLE_CFG(x) \
+				FIELD_PREP(LTC2983_THERMOCOUPLE_CFG_MASK, x)
+#define LTC2983_THERMOCOUPLE_HARD_FAULT_MASK	GENMASK(31, 29)
+#define LTC2983_THERMOCOUPLE_SOFT_FAULT_MASK	GENMASK(28, 25)
+
+#define LTC2983_RTD_CFG_MASK		GENMASK(21, 18)
+#define LTC2983_RTD_CFG(x)		FIELD_PREP(LTC2983_RTD_CFG_MASK, x)
+#define LTC2983_RTD_EXC_CURRENT_MASK	GENMASK(17, 14)
+#define LTC2983_RTD_EXC_CURRENT(x) \
+				FIELD_PREP(LTC2983_RTD_EXC_CURRENT_MASK, x)
+#define LTC2983_RTD_CURVE_MASK		GENMASK(13, 12)
+#define LTC2983_RTD_CURVE(x)		FIELD_PREP(LTC2983_RTD_CURVE_MASK, x)
+
+#define LTC2983_THERMISTOR_CFG_MASK	GENMASK(21, 19)
+#define LTC2983_THERMISTOR_CFG(x) \
+				FIELD_PREP(LTC2983_THERMISTOR_CFG_MASK, x)
+#define LTC2983_THERMISTOR_EXC_CURRENT_MASK	GENMASK(18, 15)
+#define LTC2983_THERMISTOR_EXC_CURRENT(x) \
+			FIELD_PREP(LTC2983_THERMISTOR_EXC_CURRENT_MASK, x)
+
+#define LTC2983_DIODE_CFG_MASK		GENMASK(26, 24)
+#define LTC2983_DIODE_CFG(x)		FIELD_PREP(LTC2983_DIODE_CFG_MASK, x)
+#define LTC2983_DIODE_EXC_CURRENT_MASK	GENMASK(23, 22)
+#define LTC2983_DIODE_EXC_CURRENT(x) \
+				FIELD_PREP(LTC2983_DIODE_EXC_CURRENT_MASK, x)
+#define LTC2983_DIODE_IDEAL_FACTOR_MASK	GENMASK(21, 0)
+#define LTC2983_DIODE_IDEAL_FACTOR(x) \
+				FIELD_PREP(LTC2983_DIODE_IDEAL_FACTOR_MASK, x)
+
+#define LTC2983_R_SENSE_VAL_MASK	GENMASK(26, 0)
+#define LTC2983_R_SENSE_VAL(x)		FIELD_PREP(LTC2983_R_SENSE_VAL_MASK, x)
+
+#define LTC2983_ADC_SINGLE_ENDED_MASK	BIT(26)
+#define LTC2983_ADC_SINGLE_ENDED(x) \
+				FIELD_PREP(LTC2983_ADC_SINGLE_ENDED_MASK, x)
+
+enum {
+	LTC2983_SENSOR_THERMOCOUPLE = 1,
+	LTC2983_SENSOR_THERMOCOUPLE_CUSTOM = 9,
+	LTC2983_SENSOR_RTD = 10,
+	LTC2983_SENSOR_RTD_CUSTOM = 18,
+	LTC2983_SENSOR_THERMISTOR = 19,
+	LTC2983_SENSOR_THERMISTOR_STEINHART = 26,
+	LTC2983_SENSOR_THERMISTOR_CUSTOM = 27,
+	LTC2983_SENSOR_DIODE = 28,
+	LTC2983_SENSOR_SENSE_RESISTOR = 29,
+	LTC2983_SENSOR_DIRECT_ADC = 30,
+};
+
+#define to_thermocouple(_sensor) \
+		container_of(_sensor, struct ltc2983_thermocouple, sensor)
+
+#define to_rtd(_sensor) \
+		container_of(_sensor, struct ltc2983_rtd, sensor)
+
+#define to_thermistor(_sensor) \
+		container_of(_sensor, struct ltc2983_thermistor, sensor)
+
+#define to_diode(_sensor) \
+		container_of(_sensor, struct ltc2983_diode, sensor)
+
+#define to_rsense(_sensor) \
+		container_of(_sensor, struct ltc2983_rsense, sensor)
+
+#define to_adc(_sensor) \
+		container_of(_sensor, struct ltc2983_adc, sensor)
+
+struct ltc2983_data {
+	struct regmap *regmap;
+	struct spi_device *spi;
+	struct mutex lock;
+	struct completion completion;
+	struct iio_chan_spec *iio_chan;
+	struct ltc2983_sensor **sensors;
+	u32 mux_delay_config;
+	u32 filter_notch_freq;
+	u16 custom_table_size;
+	u8 num_channels;
+	u8 iio_channels;
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 * Holds the converted temperature
+	 */
+	__be32 temp ____cacheline_aligned;
+	__be32 chan_val;
+};
+
+struct ltc2983_sensor {
+	int (*fault_handler)(const struct ltc2983_data *st, const u32 result);
+	int (*assign_chan)(struct ltc2983_data *st,
+			   const struct ltc2983_sensor *sensor);
+	/* specifies the sensor channel */
+	u32 chan;
+	/* sensor type */
+	u32 type;
+};
+
+struct ltc2983_custom_sensor {
+	/* raw table sensor data */
+	u8 *table;
+	size_t size;
+	/* address offset */
+	s8 offset;
+	bool is_steinhart;
+};
+
+struct ltc2983_thermocouple {
+	struct ltc2983_sensor sensor;
+	struct ltc2983_custom_sensor *custom;
+	u32 sensor_config;
+	u32 cold_junction_chan;
+};
+
+struct ltc2983_rtd {
+	struct ltc2983_sensor sensor;
+	struct ltc2983_custom_sensor *custom;
+	u32 sensor_config;
+	u32 r_sense_chan;
+	u32 excitation_current;
+	u32 rtd_curve;
+};
+
+struct ltc2983_thermistor {
+	struct ltc2983_sensor sensor;
+	struct ltc2983_custom_sensor *custom;
+	u32 sensor_config;
+	u32 r_sense_chan;
+	u32 excitation_current;
+};
+
+struct ltc2983_diode {
+	struct ltc2983_sensor sensor;
+	u32 sensor_config;
+	u32 excitation_current;
+	u32 ideal_factor_value;
+};
+
+struct ltc2983_rsense {
+	struct ltc2983_sensor sensor;
+	u32 r_sense_val;
+};
+
+struct ltc2983_adc {
+	struct ltc2983_sensor sensor;
+	bool single_ended;
+};
+
+/*
+ * Convert to Q format numbers. These number's are integers where
+ * the number of integer and fractional bits are specified. The resolution
+ * is given by 1/@resolution and tell us the number of fractional bits. For
+ * instance a resolution of 2^-10 means we have 10 fractional bits.
+ */
+static u32 __convert_to_raw(const u64 val, const u32 resolution)
+{
+	u64 __res = val * resolution;
+
+	/* all values are multiplied by 1000000 to remove the fraction */
+	do_div(__res, 1000000);
+
+	return __res;
+}
+
+static u32 __convert_to_raw_sign(const u64 val, const u32 resolution)
+{
+	s64 __res = -(s32)val;
+
+	__res = __convert_to_raw(__res, resolution);
+
+	return (u32)-__res;
+}
+
+static int __ltc2983_fault_handler(const struct ltc2983_data *st,
+				   const u32 result, const u32 hard_mask,
+				   const u32 soft_mask)
+{
+	const struct device *dev = &st->spi->dev;
+
+	if (result & hard_mask) {
+		dev_err(dev, "Invalid conversion: Sensor HARD fault\n");
+		return -EIO;
+	} else if (result & soft_mask) {
+		/* just print a warning */
+		dev_warn(dev, "Suspicious conversion: Sensor SOFT fault\n");
+	}
+
+	return 0;
+}
+
+static int __ltc2983_chan_assign_common(struct ltc2983_data *st,
+					const struct ltc2983_sensor *sensor,
+					u32 chan_val)
+{
+	u32 reg = LTC2983_CHAN_START_ADDR(sensor->chan);
+
+	chan_val |= LTC2983_CHAN_TYPE(sensor->type);
+	dev_dbg(&st->spi->dev, "Assign reg:0x%04X, val:0x%08X\n", reg,
+		chan_val);
+	st->chan_val = cpu_to_be32(chan_val);
+	return regmap_bulk_write(st->regmap, reg, &st->chan_val,
+				 sizeof(st->chan_val));
+}
+
+static int __ltc2983_chan_custom_sensor_assign(struct ltc2983_data *st,
+					  struct ltc2983_custom_sensor *custom,
+					  u32 *chan_val)
+{
+	u32 reg;
+	u8 mult = custom->is_steinhart ? LTC2983_CUSTOM_STEINHART_ENTRY_SZ :
+		LTC2983_CUSTOM_SENSOR_ENTRY_SZ;
+	const struct device *dev = &st->spi->dev;
+	/*
+	 * custom->size holds the raw size of the table. However, when
+	 * configuring the sensor channel, we must write the number of
+	 * entries of the table minus 1. For steinhart sensors 0 is written
+	 * since the size is constant!
+	 */
+	const u8 len = custom->is_steinhart ? 0 :
+		(custom->size / LTC2983_CUSTOM_SENSOR_ENTRY_SZ) - 1;
+	/*
+	 * Check if the offset was assigned already. It should be for steinhart
+	 * sensors. When coming from sleep, it should be assigned for all.
+	 */
+	if (custom->offset < 0) {
+		/*
+		 * This needs to be done again here because, from the moment
+		 * when this test was done (successfully) for this custom
+		 * sensor, a steinhart sensor might have been added changing
+		 * custom_table_size...
+		 */
+		if (st->custom_table_size + custom->size >
+		    (LTC2983_CUST_SENS_TBL_END_REG -
+		     LTC2983_CUST_SENS_TBL_START_REG) + 1) {
+			dev_err(dev,
+				"Not space left(%d) for new custom sensor(%zu)",
+				st->custom_table_size,
+				custom->size);
+			return -EINVAL;
+		}
+
+		custom->offset = st->custom_table_size /
+					LTC2983_CUSTOM_SENSOR_ENTRY_SZ;
+		st->custom_table_size += custom->size;
+	}
+
+	reg = (custom->offset * mult) + LTC2983_CUST_SENS_TBL_START_REG;
+
+	*chan_val |= LTC2983_CUSTOM_LEN(len);
+	*chan_val |= LTC2983_CUSTOM_ADDR(custom->offset);
+	dev_dbg(dev, "Assign custom sensor, reg:0x%04X, off:%d, sz:%zu",
+		reg, custom->offset,
+		custom->size);
+	/* write custom sensor table */
+	return regmap_bulk_write(st->regmap, reg, custom->table, custom->size);
+}
+
+static struct ltc2983_custom_sensor *__ltc2983_custom_sensor_new(
+						struct ltc2983_data *st,
+						const struct device_node *np,
+						const char *propname,
+						const bool is_steinhart,
+						const u32 resolution,
+						const bool has_signed)
+{
+	struct ltc2983_custom_sensor *new_custom;
+	u8 index, n_entries, tbl = 0;
+	struct device *dev = &st->spi->dev;
+	/*
+	 * For custom steinhart, the full u32 is taken. For all the others
+	 * the MSB is discarded.
+	 */
+	const u8 n_size = is_steinhart ? 4 : 3;
+	const u8 e_size = is_steinhart ? sizeof(u32) : sizeof(u64);
+
+	n_entries = of_property_count_elems_of_size(np, propname, e_size);
+	/* n_entries must be an even number */
+	if (!n_entries || (n_entries % 2) != 0) {
+		dev_err(dev, "Number of entries either 0 or not even\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	new_custom = devm_kzalloc(dev, sizeof(*new_custom), GFP_KERNEL);
+	if (!new_custom)
+		return ERR_PTR(-ENOMEM);
+
+	new_custom->size = n_entries * n_size;
+	/* check Steinhart size */
+	if (is_steinhart && new_custom->size != LTC2983_CUSTOM_STEINHART_SIZE) {
+		dev_err(dev, "Steinhart sensors size(%zu) must be 24",
+							new_custom->size);
+		return ERR_PTR(-EINVAL);
+	}
+	/* Check space on the table. */
+	if (st->custom_table_size + new_custom->size >
+	    (LTC2983_CUST_SENS_TBL_END_REG -
+	     LTC2983_CUST_SENS_TBL_START_REG) + 1) {
+		dev_err(dev, "No space left(%d) for new custom sensor(%zu)",
+				st->custom_table_size, new_custom->size);
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* allocate the table */
+	new_custom->table = devm_kzalloc(dev, new_custom->size, GFP_KERNEL);
+	if (!new_custom->table)
+		return ERR_PTR(-ENOMEM);
+
+	for (index = 0; index < n_entries; index++) {
+		u64 temp = 0, j;
+		/*
+		 * Steinhart sensors are configured with raw values in the
+		 * devicetree. For the other sensors we must convert the
+		 * value to raw. The odd index's correspond to temperarures
+		 * and always have 1/1024 of resolution. Temperatures also
+		 * come in kelvin, so signed values is not possible
+		 */
+		if (!is_steinhart) {
+			of_property_read_u64_index(np, propname, index, &temp);
+
+			if ((index % 2) != 0)
+				temp = __convert_to_raw(temp, 1024);
+			else if (has_signed && (s64)temp < 0)
+				temp = __convert_to_raw_sign(temp, resolution);
+			else
+				temp = __convert_to_raw(temp, resolution);
+		} else {
+			u32 t32;
+
+			of_property_read_u32_index(np, propname, index, &t32);
+			temp = t32;
+		}
+
+		for (j = 0; j < n_size; j++)
+			new_custom->table[tbl++] =
+				temp >> (8 * (n_size - j - 1));
+	}
+
+	new_custom->is_steinhart = is_steinhart;
+	/*
+	 * This is done to first add all the steinhart sensors to the table,
+	 * in order to maximize the table usage. If we mix adding steinhart
+	 * with the other sensors, we might have to do some roundup to make
+	 * sure that sensor_addr - 0x250(start address) is a multiple of 4
+	 * (for steinhart), and a multiple of 6 for all the other sensors.
+	 * Since we have const 24 bytes for steinhart sensors and 24 is
+	 * also a multiple of 6, we guarantee that the first non-steinhart
+	 * sensor will sit in a correct address without the need of filling
+	 * addresses.
+	 */
+	if (is_steinhart) {
+		new_custom->offset = st->custom_table_size /
+					LTC2983_CUSTOM_STEINHART_ENTRY_SZ;
+		st->custom_table_size += new_custom->size;
+	} else {
+		/* mark as unset. This is checked later on the assign phase */
+		new_custom->offset = -1;
+	}
+
+	return new_custom;
+}
+
+static int ltc2983_thermocouple_fault_handler(const struct ltc2983_data *st,
+					      const u32 result)
+{
+	return __ltc2983_fault_handler(st, result,
+				       LTC2983_THERMOCOUPLE_HARD_FAULT_MASK,
+				       LTC2983_THERMOCOUPLE_SOFT_FAULT_MASK);
+}
+
+static int ltc2983_common_fault_handler(const struct ltc2983_data *st,
+					const u32 result)
+{
+	return __ltc2983_fault_handler(st, result,
+				       LTC2983_COMMON_HARD_FAULT_MASK,
+				       LTC2983_COMMON_SOFT_FAULT_MASK);
+}
+
+static int ltc2983_thermocouple_assign_chan(struct ltc2983_data *st,
+				const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_thermocouple *thermo = to_thermocouple(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_CHAN_ASSIGN(thermo->cold_junction_chan);
+	chan_val |= LTC2983_THERMOCOUPLE_CFG(thermo->sensor_config);
+
+	if (thermo->custom) {
+		int ret;
+
+		ret = __ltc2983_chan_custom_sensor_assign(st, thermo->custom,
+							  &chan_val);
+		if (ret)
+			return ret;
+	}
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static int ltc2983_rtd_assign_chan(struct ltc2983_data *st,
+				   const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_rtd *rtd = to_rtd(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_CHAN_ASSIGN(rtd->r_sense_chan);
+	chan_val |= LTC2983_RTD_CFG(rtd->sensor_config);
+	chan_val |= LTC2983_RTD_EXC_CURRENT(rtd->excitation_current);
+	chan_val |= LTC2983_RTD_CURVE(rtd->rtd_curve);
+
+	if (rtd->custom) {
+		int ret;
+
+		ret = __ltc2983_chan_custom_sensor_assign(st, rtd->custom,
+							  &chan_val);
+		if (ret)
+			return ret;
+	}
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static int ltc2983_thermistor_assign_chan(struct ltc2983_data *st,
+					  const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_thermistor *thermistor = to_thermistor(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_CHAN_ASSIGN(thermistor->r_sense_chan);
+	chan_val |= LTC2983_THERMISTOR_CFG(thermistor->sensor_config);
+	chan_val |=
+		LTC2983_THERMISTOR_EXC_CURRENT(thermistor->excitation_current);
+
+	if (thermistor->custom) {
+		int ret;
+
+		ret = __ltc2983_chan_custom_sensor_assign(st,
+							  thermistor->custom,
+							  &chan_val);
+		if (ret)
+			return ret;
+	}
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static int ltc2983_diode_assign_chan(struct ltc2983_data *st,
+				     const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_diode *diode = to_diode(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_DIODE_CFG(diode->sensor_config);
+	chan_val |= LTC2983_DIODE_EXC_CURRENT(diode->excitation_current);
+	chan_val |= LTC2983_DIODE_IDEAL_FACTOR(diode->ideal_factor_value);
+
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static int ltc2983_r_sense_assign_chan(struct ltc2983_data *st,
+				       const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_rsense *rsense = to_rsense(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_R_SENSE_VAL(rsense->r_sense_val);
+
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static int ltc2983_adc_assign_chan(struct ltc2983_data *st,
+				   const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_adc *adc = to_adc(sensor);
+	u32 chan_val;
+
+	chan_val = LTC2983_ADC_SINGLE_ENDED(adc->single_ended);
+
+	return __ltc2983_chan_assign_common(st, sensor, chan_val);
+}
+
+static struct ltc2983_sensor *ltc2983_thermocouple_new(
+					const struct device_node *child,
+					struct ltc2983_data *st,
+					const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_thermocouple *thermo;
+	struct device_node *phandle;
+	u32 oc_current;
+	int ret;
+
+	thermo = devm_kzalloc(&st->spi->dev, sizeof(*thermo), GFP_KERNEL);
+	if (!thermo)
+		return ERR_PTR(-ENOMEM);
+
+	if (of_property_read_bool(child, "adi,single-ended"))
+		thermo->sensor_config = LTC2983_THERMOCOUPLE_SGL(1);
+
+	ret = of_property_read_u32(child, "adi,sensor-oc-current-microamp",
+				   &oc_current);
+	if (!ret) {
+		switch (oc_current) {
+		case 10:
+			thermo->sensor_config |=
+					LTC2983_THERMOCOUPLE_OC_CURR(0);
+			break;
+		case 100:
+			thermo->sensor_config |=
+					LTC2983_THERMOCOUPLE_OC_CURR(1);
+			break;
+		case 500:
+			thermo->sensor_config |=
+					LTC2983_THERMOCOUPLE_OC_CURR(2);
+			break;
+		case 1000:
+			thermo->sensor_config |=
+					LTC2983_THERMOCOUPLE_OC_CURR(3);
+			break;
+		default:
+			dev_err(&st->spi->dev,
+				"Invalid open circuit current:%u", oc_current);
+			return ERR_PTR(-EINVAL);
+		}
+
+		thermo->sensor_config |= LTC2983_THERMOCOUPLE_OC_CHECK(1);
+	}
+	/* validate channel index */
+	if (!(thermo->sensor_config & LTC2983_THERMOCOUPLE_DIFF_MASK) &&
+	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+		dev_err(&st->spi->dev,
+			"Invalid chann:%d for differential thermocouple",
+			sensor->chan);
+		return ERR_PTR(-EINVAL);
+	}
+
+	phandle = of_parse_phandle(child, "adi,cold-junction-handle", 0);
+	if (phandle) {
+		int ret;
+
+		ret = of_property_read_u32(phandle, "reg",
+					   &thermo->cold_junction_chan);
+		if (ret) {
+			/*
+			 * This would be catched later but we can just return
+			 * the error right away.
+			 */
+			dev_err(&st->spi->dev, "Property reg must be given\n");
+			of_node_put(phandle);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
+	/* check custom sensor */
+	if (sensor->type == LTC2983_SENSOR_THERMOCOUPLE_CUSTOM) {
+		const char *propname = "adi,custom-thermocouple";
+
+		thermo->custom = __ltc2983_custom_sensor_new(st, child,
+							     propname, false,
+							     16384, true);
+		if (IS_ERR(thermo->custom)) {
+			of_node_put(phandle);
+			return ERR_CAST(thermo->custom);
+		}
+	}
+
+	/* set common parameters */
+	thermo->sensor.fault_handler = ltc2983_thermocouple_fault_handler;
+	thermo->sensor.assign_chan = ltc2983_thermocouple_assign_chan;
+
+	of_node_put(phandle);
+	return &thermo->sensor;
+}
+
+static struct ltc2983_sensor *ltc2983_rtd_new(const struct device_node *child,
+					  struct ltc2983_data *st,
+					  const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_rtd *rtd;
+	int ret = 0;
+	struct device *dev = &st->spi->dev;
+	struct device_node *phandle;
+	u32 excitation_current = 0, n_wires = 0;
+
+	rtd = devm_kzalloc(dev, sizeof(*rtd), GFP_KERNEL);
+	if (!rtd)
+		return ERR_PTR(-ENOMEM);
+
+	phandle = of_parse_phandle(child, "adi,rsense-handle", 0);
+	if (!phandle) {
+		dev_err(dev, "Property adi,rsense-handle missing or invalid");
+		return ERR_PTR(-EINVAL);
+	}
+
+	ret = of_property_read_u32(phandle, "reg", &rtd->r_sense_chan);
+	if (ret) {
+		dev_err(dev, "Property reg must be given\n");
+		goto fail;
+	}
+
+	ret = of_property_read_u32(child, "adi,number-of-wires", &n_wires);
+	if (!ret) {
+		switch (n_wires) {
+		case 2:
+			rtd->sensor_config = LTC2983_RTD_N_WIRES(0);
+			break;
+		case 3:
+			rtd->sensor_config = LTC2983_RTD_N_WIRES(1);
+			break;
+		case 4:
+			rtd->sensor_config = LTC2983_RTD_N_WIRES(2);
+			break;
+		case 5:
+			/* 4 wires, Kelvin Rsense */
+			rtd->sensor_config = LTC2983_RTD_N_WIRES(3);
+			break;
+		default:
+			dev_err(dev, "Invalid number of wires:%u\n", n_wires);
+			ret = -EINVAL;
+			goto fail;
+		}
+	}
+
+	if (of_property_read_bool(child, "adi,rsense-share")) {
+		/* Current rotation is only available with rsense sharing */
+		if (of_property_read_bool(child, "adi,current-rotate")) {
+			if (n_wires == 2 || n_wires == 3) {
+				dev_err(dev,
+					"Rotation not allowed for 2/3 Wire RTDs");
+				ret = -EINVAL;
+				goto fail;
+			}
+			rtd->sensor_config |= LTC2983_RTD_C_ROTATE(1);
+		} else {
+			rtd->sensor_config |= LTC2983_RTD_R_SHARE(1);
+		}
+	}
+	/*
+	 * rtd channel indexes are a bit more complicated to validate.
+	 * For 4wire RTD with rotation, the channel selection cannot be
+	 * >=19 since the chann + 1 is used in this configuration.
+	 * For 4wire RTDs with kelvin rsense, the rsense channel cannot be
+	 * <=1 since chanel - 1 and channel - 2 are used.
+	 */
+	if (rtd->sensor_config & LTC2983_RTD_4_WIRE_MASK) {
+		/* 4-wire */
+		u8 min = LTC2983_DIFFERENTIAL_CHAN_MIN,
+			max = LTC2983_MAX_CHANNELS_NR;
+
+		if (rtd->sensor_config & LTC2983_RTD_ROTATION_MASK)
+			max = LTC2983_MAX_CHANNELS_NR - 1;
+
+		if (((rtd->sensor_config & LTC2983_RTD_KELVIN_R_SENSE_MASK)
+		     == LTC2983_RTD_KELVIN_R_SENSE_MASK) &&
+		    (rtd->r_sense_chan <=  min)) {
+			/* kelvin rsense*/
+			dev_err(dev,
+				"Invalid rsense chann:%d to use in kelvin rsense",
+				rtd->r_sense_chan);
+
+			ret = -EINVAL;
+			goto fail;
+		}
+
+		if (sensor->chan < min || sensor->chan > max) {
+			dev_err(dev, "Invalid chann:%d for the rtd config",
+				sensor->chan);
+
+			ret = -EINVAL;
+			goto fail;
+		}
+	} else {
+		/* same as differential case */
+		if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+			dev_err(&st->spi->dev,
+				"Invalid chann:%d for RTD", sensor->chan);
+
+			ret = -EINVAL;
+			goto fail;
+		}
+	}
+
+	/* check custom sensor */
+	if (sensor->type == LTC2983_SENSOR_RTD_CUSTOM) {
+		rtd->custom = __ltc2983_custom_sensor_new(st, child,
+							  "adi,custom-rtd",
+							  false, 2048, false);
+		if (IS_ERR(rtd->custom)) {
+			of_node_put(phandle);
+			return ERR_CAST(rtd->custom);
+		}
+	}
+
+	/* set common parameters */
+	rtd->sensor.fault_handler = ltc2983_common_fault_handler;
+	rtd->sensor.assign_chan = ltc2983_rtd_assign_chan;
+
+	ret = of_property_read_u32(child, "adi,excitation-current-microamp",
+				   &excitation_current);
+	if (ret) {
+		/* default to 5uA */
+		rtd->excitation_current = 1;
+	} else {
+		switch (excitation_current) {
+		case 5:
+			rtd->excitation_current = 0x01;
+			break;
+		case 10:
+			rtd->excitation_current = 0x02;
+			break;
+		case 25:
+			rtd->excitation_current = 0x03;
+			break;
+		case 50:
+			rtd->excitation_current = 0x04;
+			break;
+		case 100:
+			rtd->excitation_current = 0x05;
+			break;
+		case 250:
+			rtd->excitation_current = 0x06;
+			break;
+		case 500:
+			rtd->excitation_current = 0x07;
+			break;
+		case 1000:
+			rtd->excitation_current = 0x08;
+			break;
+		default:
+			dev_err(&st->spi->dev,
+				"Invalid value for excitation current(%u)",
+				excitation_current);
+			ret = -EINVAL;
+			goto fail;
+		}
+	}
+
+	of_property_read_u32(child, "adi,rtd-curve", &rtd->rtd_curve);
+
+	of_node_put(phandle);
+	return &rtd->sensor;
+fail:
+	of_node_put(phandle);
+	return ERR_PTR(ret);
+}
+
+static struct ltc2983_sensor *ltc2983_thermistor_new(
+					const struct device_node *child,
+					struct ltc2983_data *st,
+					const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_thermistor *thermistor;
+	struct device *dev = &st->spi->dev;
+	struct device_node *phandle;
+	u32 excitation_current = 0;
+	int ret = 0;
+
+	thermistor = devm_kzalloc(dev, sizeof(*thermistor), GFP_KERNEL);
+	if (!thermistor)
+		return ERR_PTR(-ENOMEM);
+
+	phandle = of_parse_phandle(child, "adi,rsense-handle", 0);
+	if (!phandle) {
+		dev_err(dev, "Property adi,rsense-handle missing or invalid");
+		return ERR_PTR(-EINVAL);
+	}
+
+	ret = of_property_read_u32(phandle, "reg", &thermistor->r_sense_chan);
+	if (ret) {
+		dev_err(dev, "rsense channel must be configured...\n");
+		goto fail;
+	}
+
+	if (of_property_read_bool(child, "adi,single-ended")) {
+		thermistor->sensor_config = LTC2983_THERMISTOR_SGL(1);
+	} else if (of_property_read_bool(child, "adi,rsense-share")) {
+		/* rotation is only possible if sharing rsense */
+		if (of_property_read_bool(child, "adi,current-rotate"))
+			thermistor->sensor_config =
+						LTC2983_THERMISTOR_C_ROTATE(1);
+		else
+			thermistor->sensor_config =
+						LTC2983_THERMISTOR_R_SHARE(1);
+	}
+	/* validate channel index */
+	if (!(thermistor->sensor_config & LTC2983_THERMISTOR_DIFF_MASK) &&
+	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+		dev_err(&st->spi->dev,
+			"Invalid chann:%d for differential thermistor",
+			sensor->chan);
+		ret = -EINVAL;
+		goto fail;
+	}
+
+	/* check custom sensor */
+	if (sensor->type >= LTC2983_SENSOR_THERMISTOR_STEINHART) {
+		bool steinhart = false;
+		const char *propname;
+
+		if (sensor->type == LTC2983_SENSOR_THERMISTOR_STEINHART) {
+			steinhart = true;
+			propname = "adi,custom-steinhart";
+		} else {
+			propname = "adi,custom-thermistor";
+		}
+
+		thermistor->custom = __ltc2983_custom_sensor_new(st, child,
+								 propname,
+								 steinhart,
+								 64, false);
+		if (IS_ERR(thermistor->custom)) {
+			of_node_put(phandle);
+			return ERR_CAST(thermistor->custom);
+		}
+	}
+	/* set common parameters */
+	thermistor->sensor.fault_handler = ltc2983_common_fault_handler;
+	thermistor->sensor.assign_chan = ltc2983_thermistor_assign_chan;
+
+	ret = of_property_read_u32(child, "adi,excitation-current-nanoamp",
+				   &excitation_current);
+	if (ret) {
+		/* Auto range is not allowed for custom sensors */
+		if (sensor->type >= LTC2983_SENSOR_THERMISTOR_STEINHART)
+			/* default to 1uA */
+			thermistor->excitation_current = 0x03;
+		else
+			/* default to auto-range */
+			thermistor->excitation_current = 0x0c;
+	} else {
+		switch (excitation_current) {
+		case 0:
+			/* auto range */
+			if (sensor->type >=
+			    LTC2983_SENSOR_THERMISTOR_STEINHART) {
+				dev_err(&st->spi->dev,
+					"Auto Range not allowed for custom sensors\n");
+				ret = -EINVAL;
+				goto fail;
+			}
+			thermistor->excitation_current = 0x0c;
+			break;
+		case 250:
+			thermistor->excitation_current = 0x01;
+			break;
+		case 500:
+			thermistor->excitation_current = 0x02;
+			break;
+		case 1000:
+			thermistor->excitation_current = 0x03;
+			break;
+		case 5000:
+			thermistor->excitation_current = 0x04;
+			break;
+		case 10000:
+			thermistor->excitation_current = 0x05;
+			break;
+		case 25000:
+			thermistor->excitation_current = 0x06;
+			break;
+		case 50000:
+			thermistor->excitation_current = 0x07;
+			break;
+		case 100000:
+			thermistor->excitation_current = 0x08;
+			break;
+		case 250000:
+			thermistor->excitation_current = 0x09;
+			break;
+		case 500000:
+			thermistor->excitation_current = 0x0a;
+			break;
+		case 1000000:
+			thermistor->excitation_current = 0x0b;
+			break;
+		default:
+			dev_err(&st->spi->dev,
+				"Invalid value for excitation current(%u)",
+				excitation_current);
+			ret = -EINVAL;
+			goto fail;
+		}
+	}
+
+	of_node_put(phandle);
+	return &thermistor->sensor;
+fail:
+	of_node_put(phandle);
+	return ERR_PTR(ret);
+}
+
+static struct ltc2983_sensor *ltc2983_diode_new(
+					const struct device_node *child,
+					const struct ltc2983_data *st,
+					const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_diode *diode;
+	u32 temp = 0, excitation_current = 0;
+	int ret;
+
+	diode = devm_kzalloc(&st->spi->dev, sizeof(*diode), GFP_KERNEL);
+	if (!diode)
+		return ERR_PTR(-ENOMEM);
+
+	if (of_property_read_bool(child, "adi,single-ended"))
+		diode->sensor_config = LTC2983_DIODE_SGL(1);
+
+	if (of_property_read_bool(child, "adi,three-conversion-cycles"))
+		diode->sensor_config |= LTC2983_DIODE_3_CONV_CYCLE(1);
+
+	if (of_property_read_bool(child, "adi,average-on"))
+		diode->sensor_config |= LTC2983_DIODE_AVERAGE_ON(1);
+
+	/* validate channel index */
+	if (!(diode->sensor_config & LTC2983_DIODE_DIFF_MASK) &&
+	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+		dev_err(&st->spi->dev,
+			"Invalid chann:%d for differential thermistor",
+			sensor->chan);
+		return ERR_PTR(-EINVAL);
+	}
+	/* set common parameters */
+	diode->sensor.fault_handler = ltc2983_common_fault_handler;
+	diode->sensor.assign_chan = ltc2983_diode_assign_chan;
+
+	ret = of_property_read_u32(child, "adi,excitation-current-microamp",
+				   &excitation_current);
+	if (!ret) {
+		switch (excitation_current) {
+		case 10:
+			diode->excitation_current = 0x00;
+			break;
+		case 20:
+			diode->excitation_current = 0x01;
+			break;
+		case 40:
+			diode->excitation_current = 0x02;
+			break;
+		case 80:
+			diode->excitation_current = 0x03;
+			break;
+		default:
+			dev_err(&st->spi->dev,
+				"Invalid value for excitation current(%u)",
+				excitation_current);
+			return ERR_PTR(-EINVAL);
+		}
+	}
+
+	of_property_read_u32(child, "adi,ideal-factor-value", &temp);
+
+	/* 2^20 resolution */
+	diode->ideal_factor_value = __convert_to_raw(temp, 1048576);
+
+	return &diode->sensor;
+}
+
+static struct ltc2983_sensor *ltc2983_r_sense_new(struct device_node *child,
+					struct ltc2983_data *st,
+					const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_rsense *rsense;
+	int ret;
+	u32 temp;
+
+	rsense = devm_kzalloc(&st->spi->dev, sizeof(*rsense), GFP_KERNEL);
+	if (!rsense)
+		return ERR_PTR(-ENOMEM);
+
+	/* validate channel index */
+	if (sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+		dev_err(&st->spi->dev, "Invalid chann:%d for r_sense",
+			sensor->chan);
+		return ERR_PTR(-EINVAL);
+	}
+
+	ret = of_property_read_u32(child, "adi,rsense-val-milli-ohms", &temp);
+	if (ret) {
+		dev_err(&st->spi->dev, "Property adi,rsense-val-milli-ohms missing\n");
+		return ERR_PTR(-EINVAL);
+	}
+	/*
+	 * Times 1000 because we have milli-ohms and __convert_to_raw
+	 * expects scales of 1000000 which are used for all other
+	 * properties.
+	 * 2^10 resolution
+	 */
+	rsense->r_sense_val = __convert_to_raw((u64)temp * 1000, 1024);
+
+	/* set common parameters */
+	rsense->sensor.assign_chan = ltc2983_r_sense_assign_chan;
+
+	return &rsense->sensor;
+}
+
+static struct ltc2983_sensor *ltc2983_adc_new(struct device_node *child,
+					 struct ltc2983_data *st,
+					 const struct ltc2983_sensor *sensor)
+{
+	struct ltc2983_adc *adc;
+
+	adc = devm_kzalloc(&st->spi->dev, sizeof(*adc), GFP_KERNEL);
+	if (!adc)
+		return ERR_PTR(-ENOMEM);
+
+	if (of_property_read_bool(child, "adi,single-ended"))
+		adc->single_ended = true;
+
+	if (!adc->single_ended &&
+	    sensor->chan < LTC2983_DIFFERENTIAL_CHAN_MIN) {
+		dev_err(&st->spi->dev, "Invalid chan:%d for differential adc\n",
+			sensor->chan);
+		return ERR_PTR(-EINVAL);
+	}
+	/* set common parameters */
+	adc->sensor.assign_chan = ltc2983_adc_assign_chan;
+	adc->sensor.fault_handler = ltc2983_common_fault_handler;
+
+	return &adc->sensor;
+}
+
+static int ltc2983_chan_read(struct ltc2983_data *st,
+			const struct ltc2983_sensor *sensor, int *val)
+{
+	u32 start_conversion = 0;
+	int ret;
+	unsigned long time;
+
+	start_conversion = LTC2983_STATUS_START(true);
+	start_conversion |= LTC2983_STATUS_CHAN_SEL(sensor->chan);
+	dev_dbg(&st->spi->dev, "Start conversion on chan:%d, status:%02X\n",
+		sensor->chan, start_conversion);
+	/* start conversion */
+	ret = regmap_write(st->regmap, LTC2983_STATUS_REG, start_conversion);
+	if (ret)
+		return ret;
+
+	reinit_completion(&st->completion);
+	/*
+	 * wait for conversion to complete.
+	 * 300 ms should be more than enough to complete the conversion.
+	 * Depending on the sensor configuration, there are 2/3 conversions
+	 * cycles of 82ms.
+	 */
+	time = wait_for_completion_timeout(&st->completion,
+					   msecs_to_jiffies(300));
+	if (!time) {
+		dev_warn(&st->spi->dev, "Conversion timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	/* read the converted data */
+	ret = regmap_bulk_read(st->regmap, LTC2983_CHAN_RES_ADDR(sensor->chan),
+			       &st->temp, sizeof(st->temp));
+	if (ret)
+		return ret;
+
+	*val = __be32_to_cpu(st->temp);
+
+	if (!(LTC2983_RES_VALID_MASK & *val)) {
+		dev_err(&st->spi->dev, "Invalid conversion detected\n");
+		return -EIO;
+	}
+
+	ret = sensor->fault_handler(st, *val);
+	if (ret)
+		return ret;
+
+	*val = sign_extend32((*val) & LTC2983_DATA_MASK, LTC2983_DATA_SIGN_BIT);
+	return 0;
+}
+
+static int ltc2983_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct ltc2983_data *st = iio_priv(indio_dev);
+	int ret;
+
+	/* sanity check */
+	if (chan->address >= st->num_channels) {
+		dev_err(&st->spi->dev, "Invalid chan address:%ld",
+			chan->address);
+		return -EINVAL;
+	}
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&st->lock);
+		ret = ltc2983_chan_read(st, st->sensors[chan->address], val);
+		mutex_unlock(&st->lock);
+		return ret ?: IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			/* value in milli degrees */
+			*val = 1000;
+			/* 2^10 */
+			*val2 = 1024;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_VOLTAGE:
+			/* value in millivolt */
+			*val = 1000;
+			/* 2^21 */
+			*val2 = 2097152;
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int ltc2983_reg_access(struct iio_dev *indio_dev,
+			      unsigned int reg,
+			      unsigned int writeval,
+			      unsigned int *readval)
+{
+	struct ltc2983_data *st = iio_priv(indio_dev);
+
+	if (readval)
+		return regmap_read(st->regmap, reg, readval);
+	else
+		return regmap_write(st->regmap, reg, writeval);
+}
+
+static irqreturn_t ltc2983_irq_handler(int irq, void *data)
+{
+	struct ltc2983_data *st = data;
+
+	complete(&st->completion);
+	return IRQ_HANDLED;
+}
+
+#define LTC2983_CHAN(__type, index, __address) ({ \
+	struct iio_chan_spec __chan = { \
+		.type = __type, \
+		.indexed = 1, \
+		.channel = index, \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+		.address = __address, \
+	}; \
+	__chan; \
+})
+
+static int ltc2983_parse_dt(struct ltc2983_data *st)
+{
+	struct device_node *child;
+	struct device *dev = &st->spi->dev;
+	int ret = 0, chan = 0, channel_avail_mask = 0;
+
+	of_property_read_u32(dev->of_node, "adi,mux-delay-config-us",
+			     &st->mux_delay_config);
+
+	of_property_read_u32(dev->of_node, "adi,filter-notch-freq",
+			     &st->filter_notch_freq);
+
+	st->num_channels = of_get_available_child_count(dev->of_node);
+	st->sensors = devm_kcalloc(dev, st->num_channels, sizeof(*st->sensors),
+				   GFP_KERNEL);
+	if (!st->sensors)
+		return -ENOMEM;
+
+	st->iio_channels = st->num_channels;
+	for_each_available_child_of_node(dev->of_node, child) {
+		struct ltc2983_sensor sensor;
+
+		ret = of_property_read_u32(child, "reg", &sensor.chan);
+		if (ret) {
+			dev_err(dev, "reg property must given for child nodes\n");
+			goto put_child;
+		}
+
+		/* check if we have a valid channel */
+		if (sensor.chan < LTC2983_MIN_CHANNELS_NR ||
+		    sensor.chan > LTC2983_MAX_CHANNELS_NR) {
+			ret = -EINVAL;
+			dev_err(dev,
+				"chan:%d must be from 1 to 20\n", sensor.chan);
+			goto put_child;
+		} else if (channel_avail_mask & BIT(sensor.chan)) {
+			ret = -EINVAL;
+			dev_err(dev, "chan:%d already in use\n", sensor.chan);
+			goto put_child;
+		}
+
+		ret = of_property_read_u32(child, "adi,sensor-type",
+					       &sensor.type);
+		if (ret) {
+			dev_err(dev,
+				"adi,sensor-type property must given for child nodes\n");
+			goto put_child;
+		}
+
+		dev_dbg(dev, "Create new sensor, type %u, chann %u",
+								sensor.type,
+								sensor.chan);
+
+		if (sensor.type >= LTC2983_SENSOR_THERMOCOUPLE &&
+		    sensor.type <= LTC2983_SENSOR_THERMOCOUPLE_CUSTOM) {
+			st->sensors[chan] = ltc2983_thermocouple_new(child, st,
+								     &sensor);
+		} else if (sensor.type >= LTC2983_SENSOR_RTD &&
+			   sensor.type <= LTC2983_SENSOR_RTD_CUSTOM) {
+			st->sensors[chan] = ltc2983_rtd_new(child, st, &sensor);
+		} else if (sensor.type >= LTC2983_SENSOR_THERMISTOR &&
+			   sensor.type <= LTC2983_SENSOR_THERMISTOR_CUSTOM) {
+			st->sensors[chan] = ltc2983_thermistor_new(child, st,
+								   &sensor);
+		} else if (sensor.type == LTC2983_SENSOR_DIODE) {
+			st->sensors[chan] = ltc2983_diode_new(child, st,
+							      &sensor);
+		} else if (sensor.type == LTC2983_SENSOR_SENSE_RESISTOR) {
+			st->sensors[chan] = ltc2983_r_sense_new(child, st,
+								&sensor);
+			/* don't add rsense to iio */
+			st->iio_channels--;
+		} else if (sensor.type == LTC2983_SENSOR_DIRECT_ADC) {
+			st->sensors[chan] = ltc2983_adc_new(child, st, &sensor);
+		} else {
+			dev_err(dev, "Unknown sensor type %d\n", sensor.type);
+			ret = -EINVAL;
+			goto put_child;
+		}
+
+		if (IS_ERR(st->sensors[chan])) {
+			dev_err(dev, "Failed to create sensor %ld",
+				PTR_ERR(st->sensors[chan]));
+			ret = PTR_ERR(st->sensors[chan]);
+			goto put_child;
+		}
+		/* set generic sensor parameters */
+		st->sensors[chan]->chan = sensor.chan;
+		st->sensors[chan]->type = sensor.type;
+
+		channel_avail_mask |= BIT(sensor.chan);
+		chan++;
+	}
+
+	return 0;
+put_child:
+	of_node_put(child);
+	return ret;
+}
+
+static int ltc2983_setup(struct ltc2983_data *st, bool assign_iio)
+{
+	u32 iio_chan_t = 0, iio_chan_v = 0, chan, iio_idx = 0, status;
+	int ret;
+
+	/* make sure the device is up: start bit (7) is 0 and done bit (6) is 1 */
+	ret = regmap_read_poll_timeout(st->regmap, LTC2983_STATUS_REG, status,
+				       LTC2983_STATUS_UP(status) == 1, 25000,
+				       25000 * 10);
+	if (ret) {
+		dev_err(&st->spi->dev, "Device startup timed out\n");
+		return ret;
+	}
+
+	ret = regmap_update_bits(st->regmap, LTC2983_GLOBAL_CONFIG_REG,
+				 LTC2983_NOTCH_FREQ_MASK,
+				 LTC2983_NOTCH_FREQ(st->filter_notch_freq));
+	if (ret)
+		return ret;
+
+	ret = regmap_write(st->regmap, LTC2983_MUX_CONFIG_REG,
+			   st->mux_delay_config);
+	if (ret)
+		return ret;
+
+	for (chan = 0; chan < st->num_channels; chan++) {
+		u32 chan_type = 0, *iio_chan;
+
+		ret = st->sensors[chan]->assign_chan(st, st->sensors[chan]);
+		if (ret)
+			return ret;
+		/*
+		 * The assign_iio flag is necessary for when the device is
+		 * coming out of sleep. In that case, we just need to
+		 * re-configure the device channels.
+		 * We also don't assign iio channels for rsense.
+		 */
+		if (st->sensors[chan]->type == LTC2983_SENSOR_SENSE_RESISTOR ||
+		    !assign_iio)
+			continue;
+
+		/* assign iio channel */
+		if (st->sensors[chan]->type != LTC2983_SENSOR_DIRECT_ADC) {
+			chan_type = IIO_TEMP;
+			iio_chan = &iio_chan_t;
+		} else {
+			chan_type = IIO_VOLTAGE;
+			iio_chan = &iio_chan_v;
+		}
+
+		/*
+		 * add chan as the iio .address so that, we can directly
+		 * reference the sensor given the iio_chan_spec
+		 */
+		st->iio_chan[iio_idx++] = LTC2983_CHAN(chan_type, (*iio_chan)++,
+						       chan);
+	}
+
+	return 0;
+}
+
+static const struct regmap_range ltc2983_reg_ranges[] = {
+	regmap_reg_range(LTC2983_STATUS_REG, LTC2983_STATUS_REG),
+	regmap_reg_range(LTC2983_TEMP_RES_START_REG, LTC2983_TEMP_RES_END_REG),
+	regmap_reg_range(LTC2983_GLOBAL_CONFIG_REG, LTC2983_GLOBAL_CONFIG_REG),
+	regmap_reg_range(LTC2983_MULT_CHANNEL_START_REG,
+			 LTC2983_MULT_CHANNEL_END_REG),
+	regmap_reg_range(LTC2983_MUX_CONFIG_REG, LTC2983_MUX_CONFIG_REG),
+	regmap_reg_range(LTC2983_CHAN_ASSIGN_START_REG,
+			 LTC2983_CHAN_ASSIGN_END_REG),
+	regmap_reg_range(LTC2983_CUST_SENS_TBL_START_REG,
+			 LTC2983_CUST_SENS_TBL_END_REG),
+};
+
+static const struct regmap_access_table ltc2983_reg_table = {
+	.yes_ranges = ltc2983_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(ltc2983_reg_ranges),
+};
+
+/*
+ *  The reg_bits are actually 12 but the device needs the first *complete*
+ *  byte for the command (R/W).
+ */
+static const struct regmap_config ltc2983_regmap_config = {
+	.reg_bits = 24,
+	.val_bits = 8,
+	.wr_table = &ltc2983_reg_table,
+	.rd_table = &ltc2983_reg_table,
+	.read_flag_mask = GENMASK(1, 0),
+	.write_flag_mask = BIT(1),
+};
+
+static const struct  iio_info ltc2983_iio_info = {
+	.read_raw = ltc2983_read_raw,
+	.debugfs_reg_access = ltc2983_reg_access,
+};
+
+static int ltc2983_probe(struct spi_device *spi)
+{
+	struct ltc2983_data *st;
+	struct iio_dev *indio_dev;
+	const char *name = spi_get_device_id(spi)->name;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	st->regmap = devm_regmap_init_spi(spi, &ltc2983_regmap_config);
+	if (IS_ERR(st->regmap)) {
+		dev_err(&spi->dev, "Failed to initialize regmap\n");
+		return PTR_ERR(st->regmap);
+	}
+
+	mutex_init(&st->lock);
+	init_completion(&st->completion);
+	st->spi = spi;
+	spi_set_drvdata(spi, st);
+
+	ret = ltc2983_parse_dt(st);
+	if (ret)
+		return ret;
+
+	st->iio_chan = devm_kzalloc(&spi->dev,
+				    st->iio_channels * sizeof(*st->iio_chan),
+				    GFP_KERNEL);
+	if (!st->iio_chan)
+		return -ENOMEM;
+
+	ret = ltc2983_setup(st, true);
+	if (ret)
+		return ret;
+
+	ret = devm_request_irq(&spi->dev, spi->irq, ltc2983_irq_handler,
+			       IRQF_TRIGGER_RISING, name, st);
+	if (ret) {
+		dev_err(&spi->dev, "failed to request an irq, %d", ret);
+		return ret;
+	}
+
+	indio_dev->name = name;
+	indio_dev->num_channels = st->iio_channels;
+	indio_dev->channels = st->iio_chan;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &ltc2983_iio_info;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static int __maybe_unused ltc2983_resume(struct device *dev)
+{
+	struct ltc2983_data *st = spi_get_drvdata(to_spi_device(dev));
+	int dummy;
+
+	/* dummy read to bring the device out of sleep */
+	regmap_read(st->regmap, LTC2983_STATUS_REG, &dummy);
+	/* we need to re-assign the channels */
+	return ltc2983_setup(st, false);
+}
+
+static int __maybe_unused ltc2983_suspend(struct device *dev)
+{
+	struct ltc2983_data *st = spi_get_drvdata(to_spi_device(dev));
+
+	return regmap_write(st->regmap, LTC2983_STATUS_REG, LTC2983_SLEEP);
+}
+
+static SIMPLE_DEV_PM_OPS(ltc2983_pm_ops, ltc2983_suspend, ltc2983_resume);
+
+static const struct spi_device_id ltc2983_id_table[] = {
+	{ "ltc2983" },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, ltc2983_id_table);
+
+static const struct of_device_id ltc2983_of_match[] = {
+	{ .compatible = "adi,ltc2983" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltc2983_of_match);
+
+static struct spi_driver ltc2983_driver = {
+	.driver = {
+		.name = "ltc2983",
+		.of_match_table = ltc2983_of_match,
+		.pm = &ltc2983_pm_ops,
+	},
+	.probe = ltc2983_probe,
+	.id_table = ltc2983_id_table,
+};
+
+module_spi_driver(ltc2983_driver);
+
+MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
+MODULE_DESCRIPTION("Analog Devices LTC2983 SPI Temperature sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/temperature/max31856.c b/drivers/iio/temperature/max31856.c
new file mode 100644
index 000000000..1954322e4
--- /dev/null
+++ b/drivers/iio/temperature/max31856.c
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0
+/* max31856.c
+ *
+ * Maxim MAX31856 thermocouple sensor driver
+ *
+ * Copyright (C) 2018-2019 Rockwell Collins
+ */
+
+#include <linux/ctype.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/util_macros.h>
+#include <asm/unaligned.h>
+#include <dt-bindings/iio/temperature/thermocouple.h>
+/*
+ * The MSB of the register value determines whether the following byte will
+ * be written or read. If it is 0, one or more byte reads will follow.
+ */
+#define MAX31856_RD_WR_BIT         BIT(7)
+
+#define MAX31856_CR0_AUTOCONVERT   BIT(7)
+#define MAX31856_CR0_1SHOT         BIT(6)
+#define MAX31856_CR0_OCFAULT       BIT(4)
+#define MAX31856_CR0_OCFAULT_MASK  GENMASK(5, 4)
+#define MAX31856_CR0_FILTER_50HZ   BIT(0)
+#define MAX31856_AVERAGING_MASK    GENMASK(6, 4)
+#define MAX31856_AVERAGING_SHIFT   4
+#define MAX31856_TC_TYPE_MASK      GENMASK(3, 0)
+#define MAX31856_FAULT_OVUV        BIT(1)
+#define MAX31856_FAULT_OPEN        BIT(0)
+
+/* The MAX31856 registers */
+#define MAX31856_CR0_REG           0x00
+#define MAX31856_CR1_REG           0x01
+#define MAX31856_MASK_REG          0x02
+#define MAX31856_CJHF_REG          0x03
+#define MAX31856_CJLF_REG          0x04
+#define MAX31856_LTHFTH_REG        0x05
+#define MAX31856_LTHFTL_REG        0x06
+#define MAX31856_LTLFTH_REG        0x07
+#define MAX31856_LTLFTL_REG        0x08
+#define MAX31856_CJTO_REG          0x09
+#define MAX31856_CJTH_REG          0x0A
+#define MAX31856_CJTL_REG          0x0B
+#define MAX31856_LTCBH_REG         0x0C
+#define MAX31856_LTCBM_REG         0x0D
+#define MAX31856_LTCBL_REG         0x0E
+#define MAX31856_SR_REG            0x0F
+
+static const struct iio_chan_spec max31856_channels[] = {
+	{	/* Thermocouple Temperature */
+		.type = IIO_TEMP,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE),
+		.info_mask_shared_by_type =
+			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)
+	},
+	{	/* Cold Junction Temperature */
+		.type = IIO_TEMP,
+		.channel2 = IIO_MOD_TEMP_AMBIENT,
+		.modified = 1,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_type =
+			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO)
+	},
+};
+
+struct max31856_data {
+	struct spi_device *spi;
+	u32 thermocouple_type;
+	bool filter_50hz;
+	int averaging;
+};
+
+static const char max31856_tc_types[] = {
+	'B', 'E', 'J', 'K', 'N', 'R', 'S', 'T'
+};
+
+static int max31856_read(struct max31856_data *data, u8 reg,
+			 u8 val[], unsigned int read_size)
+{
+	return spi_write_then_read(data->spi, &reg, 1, val, read_size);
+}
+
+static int max31856_write(struct max31856_data *data, u8 reg,
+			  unsigned int val)
+{
+	u8 buf[2];
+
+	buf[0] = reg | (MAX31856_RD_WR_BIT);
+	buf[1] = val;
+
+	return spi_write(data->spi, buf, 2);
+}
+
+static int max31856_init(struct max31856_data *data)
+{
+	int ret;
+	u8 reg_cr0_val, reg_cr1_val;
+
+	/* Start by changing to Off mode before making changes as
+	 * some settings are recommended to be set only when the device
+	 * is off
+	 */
+	ret = max31856_read(data, MAX31856_CR0_REG, &reg_cr0_val, 1);
+	if (ret)
+		return ret;
+
+	reg_cr0_val &= ~MAX31856_CR0_AUTOCONVERT;
+	ret = max31856_write(data, MAX31856_CR0_REG, reg_cr0_val);
+	if (ret)
+		return ret;
+
+	/* Set thermocouple type based on dts property */
+	ret = max31856_read(data, MAX31856_CR1_REG, &reg_cr1_val, 1);
+	if (ret)
+		return ret;
+
+	reg_cr1_val &= ~MAX31856_TC_TYPE_MASK;
+	reg_cr1_val |= data->thermocouple_type;
+
+	reg_cr1_val &= ~MAX31856_AVERAGING_MASK;
+	reg_cr1_val |= data->averaging << MAX31856_AVERAGING_SHIFT;
+
+	ret = max31856_write(data, MAX31856_CR1_REG, reg_cr1_val);
+	if (ret)
+		return ret;
+
+	/*
+	 * Enable Open circuit fault detection
+	 * Read datasheet for more information: Table 4.
+	 * Value 01 means : Enabled (Once every 16 conversions)
+	 */
+	reg_cr0_val &= ~MAX31856_CR0_OCFAULT_MASK;
+	reg_cr0_val |= MAX31856_CR0_OCFAULT;
+
+	/* Set Auto Conversion Mode */
+	reg_cr0_val &= ~MAX31856_CR0_1SHOT;
+	reg_cr0_val |= MAX31856_CR0_AUTOCONVERT;
+
+	if (data->filter_50hz)
+		reg_cr0_val |= MAX31856_CR0_FILTER_50HZ;
+	else
+		reg_cr0_val &= ~MAX31856_CR0_FILTER_50HZ;
+
+	return max31856_write(data, MAX31856_CR0_REG, reg_cr0_val);
+}
+
+static int max31856_thermocouple_read(struct max31856_data *data,
+				      struct iio_chan_spec const *chan,
+				      int *val)
+{
+	int ret, offset_cjto;
+	u8 reg_val[3];
+
+	switch (chan->channel2) {
+	case IIO_NO_MOD:
+		/*
+		 * Multibyte Read
+		 * MAX31856_LTCBH_REG, MAX31856_LTCBM_REG, MAX31856_LTCBL_REG
+		 */
+		ret = max31856_read(data, MAX31856_LTCBH_REG, reg_val, 3);
+		if (ret)
+			return ret;
+		/* Skip last 5 dead bits of LTCBL */
+		*val = get_unaligned_be24(&reg_val[0]) >> 5;
+		/* Check 7th bit of LTCBH reg. value for sign*/
+		if (reg_val[0] & 0x80)
+			*val -= 0x80000;
+		break;
+
+	case IIO_MOD_TEMP_AMBIENT:
+		/*
+		 * Multibyte Read
+		 * MAX31856_CJTO_REG, MAX31856_CJTH_REG, MAX31856_CJTL_REG
+		 */
+		ret = max31856_read(data, MAX31856_CJTO_REG, reg_val, 3);
+		if (ret)
+			return ret;
+		/* Get Cold Junction Temp. offset register value */
+		offset_cjto = reg_val[0];
+		/* Get CJTH and CJTL value and skip last 2 dead bits of CJTL */
+		*val = get_unaligned_be16(&reg_val[1]) >> 2;
+		/* As per datasheet add offset into CJTH and CJTL */
+		*val += offset_cjto;
+		/* Check 7th bit of CJTH reg. value for sign */
+		if (reg_val[1] & 0x80)
+			*val -= 0x4000;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	ret = max31856_read(data, MAX31856_SR_REG, reg_val, 1);
+	if (ret)
+		return ret;
+	/* Check for over/under voltage or open circuit fault */
+	if (reg_val[0] & (MAX31856_FAULT_OVUV | MAX31856_FAULT_OPEN))
+		return -EIO;
+
+	return ret;
+}
+
+static int max31856_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct max31856_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = max31856_thermocouple_read(data, chan, val);
+		if (ret)
+			return ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->channel2) {
+		case IIO_MOD_TEMP_AMBIENT:
+			/* Cold junction Temp. Data resolution is 0.015625 */
+			*val = 15;
+			*val2 = 625000; /* 1000 * 0.015625 */
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			/* Thermocouple Temp. Data resolution is 0.0078125 */
+			*val = 7;
+			*val2 = 812500; /* 1000 * 0.0078125) */
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+		break;
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		*val = 1 << data->averaging;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_THERMOCOUPLE_TYPE:
+		*val = max31856_tc_types[data->thermocouple_type];
+		return IIO_VAL_CHAR;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int max31856_write_raw_get_fmt(struct iio_dev *indio_dev,
+				      struct iio_chan_spec const *chan,
+				      long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_THERMOCOUPLE_TYPE:
+		return IIO_VAL_CHAR;
+	default:
+		return IIO_VAL_INT;
+	}
+}
+
+static int max31856_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct max31856_data *data = iio_priv(indio_dev);
+	int msb;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		if (val > 16 || val < 1)
+			return -EINVAL;
+		msb = fls(val) - 1;
+		/* Round up to next 2pow if needed */
+		if (BIT(msb) < val)
+			msb++;
+
+		data->averaging = msb;
+		max31856_init(data);
+		break;
+	case IIO_CHAN_INFO_THERMOCOUPLE_TYPE:
+	{
+		int tc_type = -1;
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(max31856_tc_types); i++) {
+			if (max31856_tc_types[i] == toupper(val)) {
+				tc_type = i;
+				break;
+			}
+		}
+		if (tc_type < 0)
+			return -EINVAL;
+
+		data->thermocouple_type = tc_type;
+		max31856_init(data);
+		break;
+	}
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static ssize_t show_fault(struct device *dev, u8 faultbit, char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct max31856_data *data = iio_priv(indio_dev);
+	u8 reg_val;
+	int ret;
+	bool fault;
+
+	ret = max31856_read(data, MAX31856_SR_REG, &reg_val, 1);
+	if (ret)
+		return ret;
+
+	fault = reg_val & faultbit;
+
+	return sprintf(buf, "%d\n", fault);
+}
+
+static ssize_t show_fault_ovuv(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	return show_fault(dev, MAX31856_FAULT_OVUV, buf);
+}
+
+static ssize_t show_fault_oc(struct device *dev,
+			     struct device_attribute *attr,
+			     char *buf)
+{
+	return show_fault(dev, MAX31856_FAULT_OPEN, buf);
+}
+
+static ssize_t show_filter(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct max31856_data *data = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d\n", data->filter_50hz ? 50 : 60);
+}
+
+static ssize_t set_filter(struct device *dev,
+			  struct device_attribute *attr,
+			  const char *buf,
+			  size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct max31856_data *data = iio_priv(indio_dev);
+	unsigned int freq;
+	int ret;
+
+	ret = kstrtouint(buf, 10, &freq);
+	if (ret)
+		return ret;
+
+	switch (freq) {
+	case 50:
+		data->filter_50hz = true;
+		break;
+	case 60:
+		data->filter_50hz = false;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	max31856_init(data);
+	return len;
+}
+
+static IIO_DEVICE_ATTR(fault_ovuv, 0444, show_fault_ovuv, NULL, 0);
+static IIO_DEVICE_ATTR(fault_oc, 0444, show_fault_oc, NULL, 0);
+static IIO_DEVICE_ATTR(in_temp_filter_notch_center_frequency, 0644,
+		       show_filter, set_filter, 0);
+
+static struct attribute *max31856_attributes[] = {
+	&iio_dev_attr_fault_ovuv.dev_attr.attr,
+	&iio_dev_attr_fault_oc.dev_attr.attr,
+	&iio_dev_attr_in_temp_filter_notch_center_frequency.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group max31856_group = {
+	.attrs = max31856_attributes,
+};
+
+static const struct iio_info max31856_info = {
+	.read_raw = max31856_read_raw,
+	.write_raw = max31856_write_raw,
+	.write_raw_get_fmt = max31856_write_raw_get_fmt,
+	.attrs = &max31856_group,
+};
+
+static int max31856_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct iio_dev *indio_dev;
+	struct max31856_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->spi = spi;
+	data->filter_50hz = false;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	indio_dev->info = &max31856_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = max31856_channels;
+	indio_dev->num_channels = ARRAY_SIZE(max31856_channels);
+
+	ret = of_property_read_u32(spi->dev.of_node, "thermocouple-type",
+				   &data->thermocouple_type);
+
+	if (ret) {
+		dev_info(&spi->dev,
+			 "Could not read thermocouple type DT property, configuring as a K-Type\n");
+		data->thermocouple_type = THERMOCOUPLE_TYPE_K;
+	}
+
+	/*
+	 * no need to translate values as the supported types
+	 * have the same value as the #defines
+	 */
+	switch (data->thermocouple_type) {
+	case THERMOCOUPLE_TYPE_B:
+	case THERMOCOUPLE_TYPE_E:
+	case THERMOCOUPLE_TYPE_J:
+	case THERMOCOUPLE_TYPE_K:
+	case THERMOCOUPLE_TYPE_N:
+	case THERMOCOUPLE_TYPE_R:
+	case THERMOCOUPLE_TYPE_S:
+	case THERMOCOUPLE_TYPE_T:
+		break;
+	default:
+		dev_err(&spi->dev,
+			"error: thermocouple-type %u not supported by max31856\n"
+			, data->thermocouple_type);
+		return -EINVAL;
+	}
+
+	ret = max31856_init(data);
+	if (ret) {
+		dev_err(&spi->dev, "error: Failed to configure max31856\n");
+		return ret;
+	}
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id max31856_id[] = {
+	{ "max31856", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, max31856_id);
+
+static const struct of_device_id max31856_of_match[] = {
+	{ .compatible = "maxim,max31856" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max31856_of_match);
+
+static struct spi_driver max31856_driver = {
+	.driver = {
+		.name = "max31856",
+		.of_match_table = max31856_of_match,
+	},
+	.probe = max31856_probe,
+	.id_table = max31856_id,
+};
+module_spi_driver(max31856_driver);
+
+MODULE_AUTHOR("Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>");
+MODULE_AUTHOR("Patrick Havelange <patrick.havelange@essensium.com>");
+MODULE_DESCRIPTION("Maxim MAX31856 thermocouple sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c
new file mode 100644
index 000000000..0297e215b
--- /dev/null
+++ b/drivers/iio/temperature/maxim_thermocouple.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * maxim_thermocouple.c  - Support for Maxim thermocouple chips
+ *
+ * Copyright (C) 2016-2018 Matt Ranostay
+ * Author: <matt.ranostay@konsulko.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define MAXIM_THERMOCOUPLE_DRV_NAME	"maxim_thermocouple"
+
+enum {
+	MAX6675,
+	MAX31855,
+	MAX31855K,
+	MAX31855J,
+	MAX31855N,
+	MAX31855S,
+	MAX31855T,
+	MAX31855E,
+	MAX31855R,
+};
+
+static const char maxim_tc_types[] = {
+	'K', '?', 'K', 'J', 'N', 'S', 'T', 'E', 'R'
+};
+
+static const struct iio_chan_spec max6675_channels[] = {
+	{	/* thermocouple temperature */
+		.type = IIO_TEMP,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 13,
+			.storagebits = 16,
+			.shift = 3,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct iio_chan_spec max31855_channels[] = {
+	{	/* thermocouple temperature */
+		.type = IIO_TEMP,
+		.address = 2,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_THERMOCOUPLE_TYPE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+			.shift = 2,
+			.endianness = IIO_BE,
+		},
+	},
+	{	/* cold junction temperature */
+		.type = IIO_TEMP,
+		.address = 0,
+		.channel2 = IIO_MOD_TEMP_AMBIENT,
+		.modified = 1,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 12,
+			.storagebits = 16,
+			.shift = 4,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+static const unsigned long max31855_scan_masks[] = {0x3, 0};
+
+struct maxim_thermocouple_chip {
+	const struct iio_chan_spec *channels;
+	const unsigned long *scan_masks;
+	u8 num_channels;
+	u8 read_size;
+
+	/* bit-check for valid input */
+	u32 status_bit;
+};
+
+static const struct maxim_thermocouple_chip maxim_thermocouple_chips[] = {
+	[MAX6675] = {
+			.channels = max6675_channels,
+			.num_channels = ARRAY_SIZE(max6675_channels),
+			.read_size = 2,
+			.status_bit = BIT(2),
+		},
+	[MAX31855] = {
+			.channels = max31855_channels,
+			.num_channels = ARRAY_SIZE(max31855_channels),
+			.read_size = 4,
+			.scan_masks = max31855_scan_masks,
+			.status_bit = BIT(16),
+		},
+};
+
+struct maxim_thermocouple_data {
+	struct spi_device *spi;
+	const struct maxim_thermocouple_chip *chip;
+
+	u8 buffer[16] ____cacheline_aligned;
+	char tc_type;
+};
+
+static int maxim_thermocouple_read(struct maxim_thermocouple_data *data,
+				   struct iio_chan_spec const *chan, int *val)
+{
+	unsigned int storage_bytes = data->chip->read_size;
+	unsigned int shift = chan->scan_type.shift + (chan->address * 8);
+	__be16 buf16;
+	__be32 buf32;
+	int ret;
+
+	switch (storage_bytes) {
+	case 2:
+		ret = spi_read(data->spi, (void *)&buf16, storage_bytes);
+		*val = be16_to_cpu(buf16);
+		break;
+	case 4:
+		ret = spi_read(data->spi, (void *)&buf32, storage_bytes);
+		*val = be32_to_cpu(buf32);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	/* check to be sure this is a valid reading */
+	if (*val & data->chip->status_bit)
+		return -EINVAL;
+
+	*val = sign_extend32(*val >> shift, chan->scan_type.realbits - 1);
+
+	return 0;
+}
+
+static irqreturn_t maxim_thermocouple_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct maxim_thermocouple_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = spi_read(data->spi, data->buffer, data->chip->read_size);
+	if (!ret) {
+		iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+						   iio_get_time_ns(indio_dev));
+	}
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int maxim_thermocouple_read_raw(struct iio_dev *indio_dev,
+				       struct iio_chan_spec const *chan,
+				       int *val, int *val2, long mask)
+{
+	struct maxim_thermocouple_data *data = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = maxim_thermocouple_read(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+
+		if (!ret)
+			return IIO_VAL_INT;
+
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->channel2) {
+		case IIO_MOD_TEMP_AMBIENT:
+			*val = 62;
+			*val2 = 500000; /* 1000 * 0.0625 */
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			*val = 250; /* 1000 * 0.25 */
+			ret = IIO_VAL_INT;
+		}
+		break;
+	case IIO_CHAN_INFO_THERMOCOUPLE_TYPE:
+		*val = data->tc_type;
+		ret = IIO_VAL_CHAR;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct iio_info maxim_thermocouple_info = {
+	.read_raw = maxim_thermocouple_read_raw,
+};
+
+static int maxim_thermocouple_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct iio_dev *indio_dev;
+	struct maxim_thermocouple_data *data;
+	const int chip_type = (id->driver_data == MAX6675) ? MAX6675 : MAX31855;
+	const struct maxim_thermocouple_chip *chip =
+		&maxim_thermocouple_chips[chip_type];
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	indio_dev->info = &maxim_thermocouple_info;
+	indio_dev->name = MAXIM_THERMOCOUPLE_DRV_NAME;
+	indio_dev->channels = chip->channels;
+	indio_dev->available_scan_masks = chip->scan_masks;
+	indio_dev->num_channels = chip->num_channels;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	data = iio_priv(indio_dev);
+	data->spi = spi;
+	data->chip = chip;
+	data->tc_type = maxim_tc_types[id->driver_data];
+
+	ret = devm_iio_triggered_buffer_setup(&spi->dev,
+				indio_dev, NULL,
+				maxim_thermocouple_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	if (id->driver_data == MAX31855)
+		dev_warn(&spi->dev, "generic max31855 ID is deprecated\nplease use more specific part type");
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id maxim_thermocouple_id[] = {
+	{"max6675", MAX6675},
+	{"max31855", MAX31855},
+	{"max31855k", MAX31855K},
+	{"max31855j", MAX31855J},
+	{"max31855n", MAX31855N},
+	{"max31855s", MAX31855S},
+	{"max31855t", MAX31855T},
+	{"max31855e", MAX31855E},
+	{"max31855r", MAX31855R},
+	{},
+};
+MODULE_DEVICE_TABLE(spi, maxim_thermocouple_id);
+
+static const struct of_device_id maxim_thermocouple_of_match[] = {
+        { .compatible = "maxim,max6675" },
+        { .compatible = "maxim,max31855" },
+	{ .compatible = "maxim,max31855k" },
+	{ .compatible = "maxim,max31855j" },
+	{ .compatible = "maxim,max31855n" },
+	{ .compatible = "maxim,max31855s" },
+	{ .compatible = "maxim,max31855t" },
+	{ .compatible = "maxim,max31855e" },
+	{ .compatible = "maxim,max31855r" },
+        { },
+};
+MODULE_DEVICE_TABLE(of, maxim_thermocouple_of_match);
+
+static struct spi_driver maxim_thermocouple_driver = {
+	.driver = {
+		.name	= MAXIM_THERMOCOUPLE_DRV_NAME,
+		.of_match_table = maxim_thermocouple_of_match,
+	},
+	.probe		= maxim_thermocouple_probe,
+	.id_table	= maxim_thermocouple_id,
+};
+module_spi_driver(maxim_thermocouple_driver);
+
+MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
+MODULE_DESCRIPTION("Maxim thermocouple sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c
new file mode 100644
index 000000000..ef0fec94d
--- /dev/null
+++ b/drivers/iio/temperature/mlx90614.c
@@ -0,0 +1,660 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * mlx90614.c - Support for Melexis MLX90614 contactless IR temperature sensor
+ *
+ * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net>
+ * Copyright (c) 2015 Essensium NV
+ * Copyright (c) 2015 Melexis
+ *
+ * Driver for the Melexis MLX90614 I2C 16-bit IR thermopile sensor
+ *
+ * (7-bit I2C slave address 0x5a, 100KHz bus speed only!)
+ *
+ * To wake up from sleep mode, the SDA line must be held low while SCL is high
+ * for at least 33ms.  This is achieved with an extra GPIO that can be connected
+ * directly to the SDA line.  In normal operation, the GPIO is set as input and
+ * will not interfere in I2C communication.  While the GPIO is driven low, the
+ * i2c adapter is locked since it cannot be used by other clients.  The SCL line
+ * always has a pull-up so we do not need an extra GPIO to drive it high.  If
+ * the "wakeup" GPIO is not given, power management will be disabled.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/gpio/consumer.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define MLX90614_OP_RAM		0x00
+#define MLX90614_OP_EEPROM	0x20
+#define MLX90614_OP_SLEEP	0xff
+
+/* RAM offsets with 16-bit data, MSB first */
+#define MLX90614_RAW1	(MLX90614_OP_RAM | 0x04) /* raw data IR channel 1 */
+#define MLX90614_RAW2	(MLX90614_OP_RAM | 0x05) /* raw data IR channel 2 */
+#define MLX90614_TA	(MLX90614_OP_RAM | 0x06) /* ambient temperature */
+#define MLX90614_TOBJ1	(MLX90614_OP_RAM | 0x07) /* object 1 temperature */
+#define MLX90614_TOBJ2	(MLX90614_OP_RAM | 0x08) /* object 2 temperature */
+
+/* EEPROM offsets with 16-bit data, MSB first */
+#define MLX90614_EMISSIVITY	(MLX90614_OP_EEPROM | 0x04) /* emissivity correction coefficient */
+#define MLX90614_CONFIG		(MLX90614_OP_EEPROM | 0x05) /* configuration register */
+
+/* Control bits in configuration register */
+#define MLX90614_CONFIG_IIR_SHIFT 0 /* IIR coefficient */
+#define MLX90614_CONFIG_IIR_MASK (0x7 << MLX90614_CONFIG_IIR_SHIFT)
+#define MLX90614_CONFIG_DUAL_SHIFT 6 /* single (0) or dual (1) IR sensor */
+#define MLX90614_CONFIG_DUAL_MASK (1 << MLX90614_CONFIG_DUAL_SHIFT)
+#define MLX90614_CONFIG_FIR_SHIFT 8 /* FIR coefficient */
+#define MLX90614_CONFIG_FIR_MASK (0x7 << MLX90614_CONFIG_FIR_SHIFT)
+#define MLX90614_CONFIG_GAIN_SHIFT 11 /* gain */
+#define MLX90614_CONFIG_GAIN_MASK (0x7 << MLX90614_CONFIG_GAIN_SHIFT)
+
+/* Timings (in ms) */
+#define MLX90614_TIMING_EEPROM 20 /* time for EEPROM write/erase to complete */
+#define MLX90614_TIMING_WAKEUP 34 /* time to hold SDA low for wake-up */
+#define MLX90614_TIMING_STARTUP 250 /* time before first data after wake-up */
+
+#define MLX90614_AUTOSLEEP_DELAY 5000 /* default autosleep delay */
+
+/* Magic constants */
+#define MLX90614_CONST_OFFSET_DEC -13657 /* decimal part of the Kelvin offset */
+#define MLX90614_CONST_OFFSET_REM 500000 /* remainder of offset (273.15*50) */
+#define MLX90614_CONST_SCALE 20 /* Scale in milliKelvin (0.02 * 1000) */
+#define MLX90614_CONST_RAW_EMISSIVITY_MAX 65535 /* max value for emissivity */
+#define MLX90614_CONST_EMISSIVITY_RESOLUTION 15259 /* 1/65535 ~ 0.000015259 */
+#define MLX90614_CONST_FIR 0x7 /* Fixed value for FIR part of low pass filter */
+
+struct mlx90614_data {
+	struct i2c_client *client;
+	struct mutex lock; /* for EEPROM access only */
+	struct gpio_desc *wakeup_gpio; /* NULL to disable sleep/wake-up */
+	unsigned long ready_timestamp; /* in jiffies */
+};
+
+/* Bandwidth values for IIR filtering */
+static const int mlx90614_iir_values[] = {77, 31, 20, 15, 723, 153, 110, 86};
+static IIO_CONST_ATTR(in_temp_object_filter_low_pass_3db_frequency_available,
+		      "0.15 0.20 0.31 0.77 0.86 1.10 1.53 7.23");
+
+static struct attribute *mlx90614_attributes[] = {
+	&iio_const_attr_in_temp_object_filter_low_pass_3db_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group mlx90614_attr_group = {
+	.attrs = mlx90614_attributes,
+};
+
+/*
+ * Erase an address and write word.
+ * The mutex must be locked before calling.
+ */
+static s32 mlx90614_write_word(const struct i2c_client *client, u8 command,
+			       u16 value)
+{
+	/*
+	 * Note: The mlx90614 requires a PEC on writing but does not send us a
+	 * valid PEC on reading.  Hence, we cannot set I2C_CLIENT_PEC in
+	 * i2c_client.flags.  As a workaround, we use i2c_smbus_xfer here.
+	 */
+	union i2c_smbus_data data;
+	s32 ret;
+
+	dev_dbg(&client->dev, "Writing 0x%x to address 0x%x", value, command);
+
+	data.word = 0x0000; /* erase command */
+	ret = i2c_smbus_xfer(client->adapter, client->addr,
+			     client->flags | I2C_CLIENT_PEC,
+			     I2C_SMBUS_WRITE, command,
+			     I2C_SMBUS_WORD_DATA, &data);
+	if (ret < 0)
+		return ret;
+
+	msleep(MLX90614_TIMING_EEPROM);
+
+	data.word = value; /* actual write */
+	ret = i2c_smbus_xfer(client->adapter, client->addr,
+			     client->flags | I2C_CLIENT_PEC,
+			     I2C_SMBUS_WRITE, command,
+			     I2C_SMBUS_WORD_DATA, &data);
+
+	msleep(MLX90614_TIMING_EEPROM);
+
+	return ret;
+}
+
+/*
+ * Find the IIR value inside mlx90614_iir_values array and return its position
+ * which is equivalent to the bit value in sensor register
+ */
+static inline s32 mlx90614_iir_search(const struct i2c_client *client,
+				      int value)
+{
+	int i;
+	s32 ret;
+
+	for (i = 0; i < ARRAY_SIZE(mlx90614_iir_values); ++i) {
+		if (value == mlx90614_iir_values[i])
+			break;
+	}
+
+	if (i == ARRAY_SIZE(mlx90614_iir_values))
+		return -EINVAL;
+
+	/*
+	 * CONFIG register values must not be changed so
+	 * we must read them before we actually write
+	 * changes
+	 */
+	ret = i2c_smbus_read_word_data(client, MLX90614_CONFIG);
+	if (ret < 0)
+		return ret;
+
+	ret &= ~MLX90614_CONFIG_FIR_MASK;
+	ret |= MLX90614_CONST_FIR << MLX90614_CONFIG_FIR_SHIFT;
+	ret &= ~MLX90614_CONFIG_IIR_MASK;
+	ret |= i << MLX90614_CONFIG_IIR_SHIFT;
+
+	/* Write changed values */
+	ret = mlx90614_write_word(client, MLX90614_CONFIG, ret);
+	return ret;
+}
+
+#ifdef CONFIG_PM
+/*
+ * If @startup is true, make sure MLX90614_TIMING_STARTUP ms have elapsed since
+ * the last wake-up.  This is normally only needed to get a valid temperature
+ * reading.  EEPROM access does not need such delay.
+ * Return 0 on success, <0 on error.
+ */
+static int mlx90614_power_get(struct mlx90614_data *data, bool startup)
+{
+	unsigned long now;
+
+	if (!data->wakeup_gpio)
+		return 0;
+
+	pm_runtime_get_sync(&data->client->dev);
+
+	if (startup) {
+		now = jiffies;
+		if (time_before(now, data->ready_timestamp) &&
+		    msleep_interruptible(jiffies_to_msecs(
+				data->ready_timestamp - now)) != 0) {
+			pm_runtime_put_autosuspend(&data->client->dev);
+			return -EINTR;
+		}
+	}
+
+	return 0;
+}
+
+static void mlx90614_power_put(struct mlx90614_data *data)
+{
+	if (!data->wakeup_gpio)
+		return;
+
+	pm_runtime_mark_last_busy(&data->client->dev);
+	pm_runtime_put_autosuspend(&data->client->dev);
+}
+#else
+static inline int mlx90614_power_get(struct mlx90614_data *data, bool startup)
+{
+	return 0;
+}
+
+static inline void mlx90614_power_put(struct mlx90614_data *data)
+{
+}
+#endif
+
+static int mlx90614_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *channel, int *val,
+			    int *val2, long mask)
+{
+	struct mlx90614_data *data = iio_priv(indio_dev);
+	u8 cmd;
+	s32 ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: /* 0.02K / LSB */
+		switch (channel->channel2) {
+		case IIO_MOD_TEMP_AMBIENT:
+			cmd = MLX90614_TA;
+			break;
+		case IIO_MOD_TEMP_OBJECT:
+			switch (channel->channel) {
+			case 0:
+				cmd = MLX90614_TOBJ1;
+				break;
+			case 1:
+				cmd = MLX90614_TOBJ2;
+				break;
+			default:
+				return -EINVAL;
+			}
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		ret = mlx90614_power_get(data, true);
+		if (ret < 0)
+			return ret;
+		ret = i2c_smbus_read_word_data(data->client, cmd);
+		mlx90614_power_put(data);
+
+		if (ret < 0)
+			return ret;
+
+		/* MSB is an error flag */
+		if (ret & 0x8000)
+			return -EIO;
+
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = MLX90614_CONST_OFFSET_DEC;
+		*val2 = MLX90614_CONST_OFFSET_REM;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SCALE:
+		*val = MLX90614_CONST_SCALE;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBEMISSIVITY: /* 1/65535 / LSB */
+		mlx90614_power_get(data, false);
+		mutex_lock(&data->lock);
+		ret = i2c_smbus_read_word_data(data->client,
+					       MLX90614_EMISSIVITY);
+		mutex_unlock(&data->lock);
+		mlx90614_power_put(data);
+
+		if (ret < 0)
+			return ret;
+
+		if (ret == MLX90614_CONST_RAW_EMISSIVITY_MAX) {
+			*val = 1;
+			*val2 = 0;
+		} else {
+			*val = 0;
+			*val2 = ret * MLX90614_CONST_EMISSIVITY_RESOLUTION;
+		}
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: /* IIR setting with
+							     FIR = 1024 */
+		mlx90614_power_get(data, false);
+		mutex_lock(&data->lock);
+		ret = i2c_smbus_read_word_data(data->client, MLX90614_CONFIG);
+		mutex_unlock(&data->lock);
+		mlx90614_power_put(data);
+
+		if (ret < 0)
+			return ret;
+
+		*val = mlx90614_iir_values[ret & MLX90614_CONFIG_IIR_MASK] / 100;
+		*val2 = (mlx90614_iir_values[ret & MLX90614_CONFIG_IIR_MASK] % 100) *
+			10000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mlx90614_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *channel, int val,
+			     int val2, long mask)
+{
+	struct mlx90614_data *data = iio_priv(indio_dev);
+	s32 ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBEMISSIVITY: /* 1/65535 / LSB */
+		if (val < 0 || val2 < 0 || val > 1 || (val == 1 && val2 != 0))
+			return -EINVAL;
+		val = val * MLX90614_CONST_RAW_EMISSIVITY_MAX +
+			val2 / MLX90614_CONST_EMISSIVITY_RESOLUTION;
+
+		mlx90614_power_get(data, false);
+		mutex_lock(&data->lock);
+		ret = mlx90614_write_word(data->client, MLX90614_EMISSIVITY,
+					  val);
+		mutex_unlock(&data->lock);
+		mlx90614_power_put(data);
+
+		return ret;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: /* IIR Filter setting */
+		if (val < 0 || val2 < 0)
+			return -EINVAL;
+
+		mlx90614_power_get(data, false);
+		mutex_lock(&data->lock);
+		ret = mlx90614_iir_search(data->client,
+					  val * 100 + val2 / 10000);
+		mutex_unlock(&data->lock);
+		mlx90614_power_put(data);
+
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mlx90614_write_raw_get_fmt(struct iio_dev *indio_dev,
+				     struct iio_chan_spec const *channel,
+				     long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBEMISSIVITY:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_chan_spec mlx90614_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.modified = 1,
+		.channel2 = IIO_MOD_TEMP_AMBIENT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		    BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_TEMP,
+		.modified = 1,
+		.channel2 = IIO_MOD_TEMP_OBJECT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		    BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) |
+			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		    BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.modified = 1,
+		.channel = 1,
+		.channel2 = IIO_MOD_TEMP_OBJECT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		    BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) |
+			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		    BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static const struct iio_info mlx90614_info = {
+	.read_raw = mlx90614_read_raw,
+	.write_raw = mlx90614_write_raw,
+	.write_raw_get_fmt = mlx90614_write_raw_get_fmt,
+	.attrs = &mlx90614_attr_group,
+};
+
+#ifdef CONFIG_PM
+static int mlx90614_sleep(struct mlx90614_data *data)
+{
+	s32 ret;
+
+	if (!data->wakeup_gpio) {
+		dev_dbg(&data->client->dev, "Sleep disabled");
+		return -ENOSYS;
+	}
+
+	dev_dbg(&data->client->dev, "Requesting sleep");
+
+	mutex_lock(&data->lock);
+	ret = i2c_smbus_xfer(data->client->adapter, data->client->addr,
+			     data->client->flags | I2C_CLIENT_PEC,
+			     I2C_SMBUS_WRITE, MLX90614_OP_SLEEP,
+			     I2C_SMBUS_BYTE, NULL);
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int mlx90614_wakeup(struct mlx90614_data *data)
+{
+	if (!data->wakeup_gpio) {
+		dev_dbg(&data->client->dev, "Wake-up disabled");
+		return -ENOSYS;
+	}
+
+	dev_dbg(&data->client->dev, "Requesting wake-up");
+
+	i2c_lock_bus(data->client->adapter, I2C_LOCK_ROOT_ADAPTER);
+	gpiod_direction_output(data->wakeup_gpio, 0);
+	msleep(MLX90614_TIMING_WAKEUP);
+	gpiod_direction_input(data->wakeup_gpio);
+	i2c_unlock_bus(data->client->adapter, I2C_LOCK_ROOT_ADAPTER);
+
+	data->ready_timestamp = jiffies +
+			msecs_to_jiffies(MLX90614_TIMING_STARTUP);
+
+	/*
+	 * Quirk: the i2c controller may get confused right after the
+	 * wake-up signal has been sent.  As a workaround, do a dummy read.
+	 * If the read fails, the controller will probably be reset so that
+	 * further reads will work.
+	 */
+	i2c_smbus_read_word_data(data->client, MLX90614_CONFIG);
+
+	return 0;
+}
+
+/* Return wake-up GPIO or NULL if sleep functionality should be disabled. */
+static struct gpio_desc *mlx90614_probe_wakeup(struct i2c_client *client)
+{
+	struct gpio_desc *gpio;
+
+	if (!i2c_check_functionality(client->adapter,
+						I2C_FUNC_SMBUS_WRITE_BYTE)) {
+		dev_info(&client->dev,
+			 "i2c adapter does not support SMBUS_WRITE_BYTE, sleep disabled");
+		return NULL;
+	}
+
+	gpio = devm_gpiod_get_optional(&client->dev, "wakeup", GPIOD_IN);
+
+	if (IS_ERR(gpio)) {
+		dev_warn(&client->dev,
+			 "gpio acquisition failed with error %ld, sleep disabled",
+			 PTR_ERR(gpio));
+		return NULL;
+	} else if (!gpio) {
+		dev_info(&client->dev,
+			 "wakeup-gpio not found, sleep disabled");
+	}
+
+	return gpio;
+}
+#else
+static inline int mlx90614_sleep(struct mlx90614_data *data)
+{
+	return -ENOSYS;
+}
+static inline int mlx90614_wakeup(struct mlx90614_data *data)
+{
+	return -ENOSYS;
+}
+static inline struct gpio_desc *mlx90614_probe_wakeup(struct i2c_client *client)
+{
+	return NULL;
+}
+#endif
+
+/* Return 0 for single sensor, 1 for dual sensor, <0 on error. */
+static int mlx90614_probe_num_ir_sensors(struct i2c_client *client)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_word_data(client, MLX90614_CONFIG);
+
+	if (ret < 0)
+		return ret;
+
+	return (ret & MLX90614_CONFIG_DUAL_MASK) ? 1 : 0;
+}
+
+static int mlx90614_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct mlx90614_data *data;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -EOPNOTSUPP;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+	data->wakeup_gpio = mlx90614_probe_wakeup(client);
+
+	mlx90614_wakeup(data);
+
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &mlx90614_info;
+
+	ret = mlx90614_probe_num_ir_sensors(client);
+	switch (ret) {
+	case 0:
+		dev_dbg(&client->dev, "Found single sensor");
+		indio_dev->channels = mlx90614_channels;
+		indio_dev->num_channels = 2;
+		break;
+	case 1:
+		dev_dbg(&client->dev, "Found dual sensor");
+		indio_dev->channels = mlx90614_channels;
+		indio_dev->num_channels = 3;
+		break;
+	default:
+		return ret;
+	}
+
+	if (data->wakeup_gpio) {
+		pm_runtime_set_autosuspend_delay(&client->dev,
+						 MLX90614_AUTOSLEEP_DELAY);
+		pm_runtime_use_autosuspend(&client->dev);
+		pm_runtime_set_active(&client->dev);
+		pm_runtime_enable(&client->dev);
+	}
+
+	return iio_device_register(indio_dev);
+}
+
+static int mlx90614_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct mlx90614_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	if (data->wakeup_gpio) {
+		pm_runtime_disable(&client->dev);
+		if (!pm_runtime_status_suspended(&client->dev))
+			mlx90614_sleep(data);
+		pm_runtime_set_suspended(&client->dev);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id mlx90614_id[] = {
+	{ "mlx90614", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mlx90614_id);
+
+static const struct of_device_id mlx90614_of_match[] = {
+	{ .compatible = "melexis,mlx90614" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mlx90614_of_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int mlx90614_pm_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mlx90614_data *data = iio_priv(indio_dev);
+
+	if (data->wakeup_gpio && pm_runtime_active(dev))
+		return mlx90614_sleep(data);
+
+	return 0;
+}
+
+static int mlx90614_pm_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mlx90614_data *data = iio_priv(indio_dev);
+	int err;
+
+	if (data->wakeup_gpio) {
+		err = mlx90614_wakeup(data);
+		if (err < 0)
+			return err;
+
+		pm_runtime_disable(dev);
+		pm_runtime_set_active(dev);
+		pm_runtime_enable(dev);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM
+static int mlx90614_pm_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mlx90614_data *data = iio_priv(indio_dev);
+
+	return mlx90614_sleep(data);
+}
+
+static int mlx90614_pm_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mlx90614_data *data = iio_priv(indio_dev);
+
+	return mlx90614_wakeup(data);
+}
+#endif
+
+static const struct dev_pm_ops mlx90614_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mlx90614_pm_suspend, mlx90614_pm_resume)
+	SET_RUNTIME_PM_OPS(mlx90614_pm_runtime_suspend,
+			   mlx90614_pm_runtime_resume, NULL)
+};
+
+static struct i2c_driver mlx90614_driver = {
+	.driver = {
+		.name	= "mlx90614",
+		.of_match_table = mlx90614_of_match,
+		.pm	= &mlx90614_pm_ops,
+	},
+	.probe = mlx90614_probe,
+	.remove = mlx90614_remove,
+	.id_table = mlx90614_id,
+};
+module_i2c_driver(mlx90614_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_AUTHOR("Vianney le Clément de Saint-Marcq <vianney.leclement@essensium.com>");
+MODULE_AUTHOR("Crt Mori <cmo@melexis.com>");
+MODULE_DESCRIPTION("Melexis MLX90614 contactless IR temperature sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
new file mode 100644
index 000000000..608ccb1d8
--- /dev/null
+++ b/drivers/iio/temperature/mlx90632.c
@@ -0,0 +1,988 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * mlx90632.c - Melexis MLX90632 contactless IR temperature sensor
+ *
+ * Copyright (c) 2017 Melexis <cmo@melexis.com>
+ *
+ * Driver for the Melexis MLX90632 I2C 16-bit IR thermopile sensor
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/math64.h>
+#include <linux/of.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* Memory sections addresses */
+#define MLX90632_ADDR_RAM	0x4000 /* Start address of ram */
+#define MLX90632_ADDR_EEPROM	0x2480 /* Start address of user eeprom */
+
+/* EEPROM addresses - used at startup */
+#define MLX90632_EE_CTRL	0x24d4 /* Control register initial value */
+#define MLX90632_EE_I2C_ADDR	0x24d5 /* I2C address register initial value */
+#define MLX90632_EE_VERSION	0x240b /* EEPROM version reg address */
+#define MLX90632_EE_P_R		0x240c /* P_R calibration register 32bit */
+#define MLX90632_EE_P_G		0x240e /* P_G calibration register 32bit */
+#define MLX90632_EE_P_T		0x2410 /* P_T calibration register 32bit */
+#define MLX90632_EE_P_O		0x2412 /* P_O calibration register 32bit */
+#define MLX90632_EE_Aa		0x2414 /* Aa calibration register 32bit */
+#define MLX90632_EE_Ab		0x2416 /* Ab calibration register 32bit */
+#define MLX90632_EE_Ba		0x2418 /* Ba calibration register 32bit */
+#define MLX90632_EE_Bb		0x241a /* Bb calibration register 32bit */
+#define MLX90632_EE_Ca		0x241c /* Ca calibration register 32bit */
+#define MLX90632_EE_Cb		0x241e /* Cb calibration register 32bit */
+#define MLX90632_EE_Da		0x2420 /* Da calibration register 32bit */
+#define MLX90632_EE_Db		0x2422 /* Db calibration register 32bit */
+#define MLX90632_EE_Ea		0x2424 /* Ea calibration register 32bit */
+#define MLX90632_EE_Eb		0x2426 /* Eb calibration register 32bit */
+#define MLX90632_EE_Fa		0x2428 /* Fa calibration register 32bit */
+#define MLX90632_EE_Fb		0x242a /* Fb calibration register 32bit */
+#define MLX90632_EE_Ga		0x242c /* Ga calibration register 32bit */
+
+#define MLX90632_EE_Gb		0x242e /* Gb calibration register 16bit */
+#define MLX90632_EE_Ka		0x242f /* Ka calibration register 16bit */
+
+#define MLX90632_EE_Ha		0x2481 /* Ha customer calib value reg 16bit */
+#define MLX90632_EE_Hb		0x2482 /* Hb customer calib value reg 16bit */
+
+/* Register addresses - volatile */
+#define MLX90632_REG_I2C_ADDR	0x3000 /* Chip I2C address register */
+
+/* Control register address - volatile */
+#define MLX90632_REG_CONTROL	0x3001 /* Control Register address */
+#define   MLX90632_CFG_PWR_MASK		GENMASK(2, 1) /* PowerMode Mask */
+#define   MLX90632_CFG_MTYP_MASK		GENMASK(8, 4) /* Meas select Mask */
+
+/* PowerModes statuses */
+#define MLX90632_PWR_STATUS(ctrl_val) (ctrl_val << 1)
+#define MLX90632_PWR_STATUS_HALT MLX90632_PWR_STATUS(0) /* hold */
+#define MLX90632_PWR_STATUS_SLEEP_STEP MLX90632_PWR_STATUS(1) /* sleep step*/
+#define MLX90632_PWR_STATUS_STEP MLX90632_PWR_STATUS(2) /* step */
+#define MLX90632_PWR_STATUS_CONTINUOUS MLX90632_PWR_STATUS(3) /* continuous*/
+
+/* Measurement types */
+#define MLX90632_MTYP_MEDICAL 0
+#define MLX90632_MTYP_EXTENDED 17
+
+/* Measurement type select*/
+#define MLX90632_MTYP_STATUS(ctrl_val) (ctrl_val << 4)
+#define MLX90632_MTYP_STATUS_MEDICAL MLX90632_MTYP_STATUS(MLX90632_MTYP_MEDICAL)
+#define MLX90632_MTYP_STATUS_EXTENDED MLX90632_MTYP_STATUS(MLX90632_MTYP_EXTENDED)
+
+/* I2C command register - volatile */
+#define MLX90632_REG_I2C_CMD    0x3005 /* I2C command Register address */
+
+/* Device status register - volatile */
+#define MLX90632_REG_STATUS	0x3fff /* Device status register */
+#define   MLX90632_STAT_BUSY		BIT(10) /* Device busy indicator */
+#define   MLX90632_STAT_EE_BUSY		BIT(9) /* EEPROM busy indicator */
+#define   MLX90632_STAT_BRST		BIT(8) /* Brown out reset indicator */
+#define   MLX90632_STAT_CYCLE_POS	GENMASK(6, 2) /* Data position */
+#define   MLX90632_STAT_DATA_RDY	BIT(0) /* Data ready indicator */
+
+/* RAM_MEAS address-es for each channel */
+#define MLX90632_RAM_1(meas_num)	(MLX90632_ADDR_RAM + 3 * meas_num)
+#define MLX90632_RAM_2(meas_num)	(MLX90632_ADDR_RAM + 3 * meas_num + 1)
+#define MLX90632_RAM_3(meas_num)	(MLX90632_ADDR_RAM + 3 * meas_num + 2)
+
+/* Name important RAM_MEAS channels */
+#define MLX90632_RAM_DSP5_EXTENDED_AMBIENT_1 MLX90632_RAM_3(17)
+#define MLX90632_RAM_DSP5_EXTENDED_AMBIENT_2 MLX90632_RAM_3(18)
+#define MLX90632_RAM_DSP5_EXTENDED_OBJECT_1 MLX90632_RAM_1(17)
+#define MLX90632_RAM_DSP5_EXTENDED_OBJECT_2 MLX90632_RAM_2(17)
+#define MLX90632_RAM_DSP5_EXTENDED_OBJECT_3 MLX90632_RAM_1(18)
+#define MLX90632_RAM_DSP5_EXTENDED_OBJECT_4 MLX90632_RAM_2(18)
+#define MLX90632_RAM_DSP5_EXTENDED_OBJECT_5 MLX90632_RAM_1(19)
+#define MLX90632_RAM_DSP5_EXTENDED_OBJECT_6 MLX90632_RAM_2(19)
+
+/* Magic constants */
+#define MLX90632_ID_MEDICAL	0x0105 /* EEPROM DSPv5 Medical device id */
+#define MLX90632_ID_CONSUMER	0x0205 /* EEPROM DSPv5 Consumer device id */
+#define MLX90632_ID_EXTENDED	0x0505 /* EEPROM DSPv5 Extended range device id */
+#define MLX90632_ID_MASK	GENMASK(14, 0) /* DSP version and device ID in EE_VERSION */
+#define MLX90632_DSP_VERSION	5 /* DSP version */
+#define MLX90632_DSP_MASK	GENMASK(7, 0) /* DSP version in EE_VERSION */
+#define MLX90632_RESET_CMD	0x0006 /* Reset sensor (address or global) */
+#define MLX90632_REF_12 	12LL /* ResCtrlRef value of Ch 1 or Ch 2 */
+#define MLX90632_REF_3		12LL /* ResCtrlRef value of Channel 3 */
+#define MLX90632_MAX_MEAS_NUM	31 /* Maximum measurements in list */
+#define MLX90632_SLEEP_DELAY_MS 3000 /* Autosleep delay */
+#define MLX90632_EXTENDED_LIMIT 27000 /* Extended mode raw value limit */
+
+/**
+ * struct mlx90632_data - private data for the MLX90632 device
+ * @client: I2C client of the device
+ * @lock: Internal mutex for multiple reads for single measurement
+ * @regmap: Regmap of the device
+ * @emissivity: Object emissivity from 0 to 1000 where 1000 = 1.
+ * @mtyp: Measurement type physical sensor configuration for extended range
+ *        calculations
+ * @object_ambient_temperature: Ambient temperature at object (might differ of
+ *                              the ambient temperature of sensor.
+ */
+struct mlx90632_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	struct regmap *regmap;
+	u16 emissivity;
+	u8 mtyp;
+	u32 object_ambient_temperature;
+};
+
+static const struct regmap_range mlx90632_volatile_reg_range[] = {
+	regmap_reg_range(MLX90632_REG_I2C_ADDR, MLX90632_REG_CONTROL),
+	regmap_reg_range(MLX90632_REG_I2C_CMD, MLX90632_REG_I2C_CMD),
+	regmap_reg_range(MLX90632_REG_STATUS, MLX90632_REG_STATUS),
+	regmap_reg_range(MLX90632_RAM_1(0),
+			 MLX90632_RAM_3(MLX90632_MAX_MEAS_NUM)),
+};
+
+static const struct regmap_access_table mlx90632_volatile_regs_tbl = {
+	.yes_ranges = mlx90632_volatile_reg_range,
+	.n_yes_ranges = ARRAY_SIZE(mlx90632_volatile_reg_range),
+};
+
+static const struct regmap_range mlx90632_read_reg_range[] = {
+	regmap_reg_range(MLX90632_EE_VERSION, MLX90632_EE_Ka),
+	regmap_reg_range(MLX90632_EE_CTRL, MLX90632_EE_I2C_ADDR),
+	regmap_reg_range(MLX90632_EE_Ha, MLX90632_EE_Hb),
+	regmap_reg_range(MLX90632_REG_I2C_ADDR, MLX90632_REG_CONTROL),
+	regmap_reg_range(MLX90632_REG_I2C_CMD, MLX90632_REG_I2C_CMD),
+	regmap_reg_range(MLX90632_REG_STATUS, MLX90632_REG_STATUS),
+	regmap_reg_range(MLX90632_RAM_1(0),
+			 MLX90632_RAM_3(MLX90632_MAX_MEAS_NUM)),
+};
+
+static const struct regmap_access_table mlx90632_readable_regs_tbl = {
+	.yes_ranges = mlx90632_read_reg_range,
+	.n_yes_ranges = ARRAY_SIZE(mlx90632_read_reg_range),
+};
+
+static const struct regmap_range mlx90632_no_write_reg_range[] = {
+	regmap_reg_range(MLX90632_EE_VERSION, MLX90632_EE_Ka),
+	regmap_reg_range(MLX90632_RAM_1(0),
+			 MLX90632_RAM_3(MLX90632_MAX_MEAS_NUM)),
+};
+
+static const struct regmap_access_table mlx90632_writeable_regs_tbl = {
+	.no_ranges = mlx90632_no_write_reg_range,
+	.n_no_ranges = ARRAY_SIZE(mlx90632_no_write_reg_range),
+};
+
+static const struct regmap_config mlx90632_regmap = {
+	.reg_bits = 16,
+	.val_bits = 16,
+
+	.volatile_table = &mlx90632_volatile_regs_tbl,
+	.rd_table = &mlx90632_readable_regs_tbl,
+	.wr_table = &mlx90632_writeable_regs_tbl,
+
+	.use_single_read = true,
+	.use_single_write = true,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.val_format_endian = REGMAP_ENDIAN_BIG,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static s32 mlx90632_pwr_set_sleep_step(struct regmap *regmap)
+{
+	return regmap_update_bits(regmap, MLX90632_REG_CONTROL,
+				  MLX90632_CFG_PWR_MASK,
+				  MLX90632_PWR_STATUS_SLEEP_STEP);
+}
+
+static s32 mlx90632_pwr_continuous(struct regmap *regmap)
+{
+	return regmap_update_bits(regmap, MLX90632_REG_CONTROL,
+				  MLX90632_CFG_PWR_MASK,
+				  MLX90632_PWR_STATUS_CONTINUOUS);
+}
+
+/**
+ * mlx90632_perform_measurement() - Trigger and retrieve current measurement cycle
+ * @data: pointer to mlx90632_data object containing regmap information
+ *
+ * Perform a measurement and return latest measurement cycle position reported
+ * by sensor. This is a blocking function for 500ms, as that is default sensor
+ * refresh rate.
+ */
+static int mlx90632_perform_measurement(struct mlx90632_data *data)
+{
+	unsigned int reg_status;
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, MLX90632_REG_STATUS,
+				 MLX90632_STAT_DATA_RDY, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read_poll_timeout(data->regmap, MLX90632_REG_STATUS, reg_status,
+				       !(reg_status & MLX90632_STAT_DATA_RDY), 10000,
+				       100 * 10000);
+
+	if (ret < 0) {
+		dev_err(&data->client->dev, "data not ready");
+		return -ETIMEDOUT;
+	}
+
+	return (reg_status & MLX90632_STAT_CYCLE_POS) >> 2;
+}
+
+static int mlx90632_set_meas_type(struct regmap *regmap, u8 type)
+{
+	int ret;
+
+	if ((type != MLX90632_MTYP_MEDICAL) && (type != MLX90632_MTYP_EXTENDED))
+		return -EINVAL;
+
+	ret = regmap_write(regmap, MLX90632_REG_I2C_CMD, MLX90632_RESET_CMD);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Give the mlx90632 some time to reset properly before sending a new I2C command
+	 * if this is not done, the following I2C command(s) will not be accepted.
+	 */
+	usleep_range(150, 200);
+
+	ret = regmap_write_bits(regmap, MLX90632_REG_CONTROL,
+				 (MLX90632_CFG_MTYP_MASK | MLX90632_CFG_PWR_MASK),
+				 (MLX90632_MTYP_STATUS(type) | MLX90632_PWR_STATUS_HALT));
+	if (ret < 0)
+		return ret;
+
+	return mlx90632_pwr_continuous(regmap);
+}
+
+static int mlx90632_channel_new_select(int perform_ret, uint8_t *channel_new,
+				       uint8_t *channel_old)
+{
+	switch (perform_ret) {
+	case 1:
+		*channel_new = 1;
+		*channel_old = 2;
+		break;
+	case 2:
+		*channel_new = 2;
+		*channel_old = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mlx90632_read_ambient_raw(struct regmap *regmap,
+				     s16 *ambient_new_raw, s16 *ambient_old_raw)
+{
+	int ret;
+	unsigned int read_tmp;
+
+	ret = regmap_read(regmap, MLX90632_RAM_3(1), &read_tmp);
+	if (ret < 0)
+		return ret;
+	*ambient_new_raw = (s16)read_tmp;
+
+	ret = regmap_read(regmap, MLX90632_RAM_3(2), &read_tmp);
+	if (ret < 0)
+		return ret;
+	*ambient_old_raw = (s16)read_tmp;
+
+	return ret;
+}
+
+static int mlx90632_read_object_raw(struct regmap *regmap,
+				    int perform_measurement_ret,
+				    s16 *object_new_raw, s16 *object_old_raw)
+{
+	int ret;
+	unsigned int read_tmp;
+	s16 read;
+	u8 channel = 0;
+	u8 channel_old = 0;
+
+	ret = mlx90632_channel_new_select(perform_measurement_ret, &channel,
+					  &channel_old);
+	if (ret != 0)
+		return ret;
+
+	ret = regmap_read(regmap, MLX90632_RAM_2(channel), &read_tmp);
+	if (ret < 0)
+		return ret;
+
+	read = (s16)read_tmp;
+
+	ret = regmap_read(regmap, MLX90632_RAM_1(channel), &read_tmp);
+	if (ret < 0)
+		return ret;
+	*object_new_raw = (read + (s16)read_tmp) / 2;
+
+	ret = regmap_read(regmap, MLX90632_RAM_2(channel_old), &read_tmp);
+	if (ret < 0)
+		return ret;
+	read = (s16)read_tmp;
+
+	ret = regmap_read(regmap, MLX90632_RAM_1(channel_old), &read_tmp);
+	if (ret < 0)
+		return ret;
+	*object_old_raw = (read + (s16)read_tmp) / 2;
+
+	return ret;
+}
+
+static int mlx90632_read_all_channel(struct mlx90632_data *data,
+				     s16 *ambient_new_raw, s16 *ambient_old_raw,
+				     s16 *object_new_raw, s16 *object_old_raw)
+{
+	s32 ret, measurement;
+
+	mutex_lock(&data->lock);
+	measurement = mlx90632_perform_measurement(data);
+	if (measurement < 0) {
+		ret = measurement;
+		goto read_unlock;
+	}
+	ret = mlx90632_read_ambient_raw(data->regmap, ambient_new_raw,
+					ambient_old_raw);
+	if (ret < 0)
+		goto read_unlock;
+
+	ret = mlx90632_read_object_raw(data->regmap, measurement,
+				       object_new_raw, object_old_raw);
+read_unlock:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int mlx90632_read_ambient_raw_extended(struct regmap *regmap,
+					      s16 *ambient_new_raw, s16 *ambient_old_raw)
+{
+	unsigned int read_tmp;
+	int ret;
+
+	ret = regmap_read(regmap, MLX90632_RAM_DSP5_EXTENDED_AMBIENT_1, &read_tmp);
+	if (ret < 0)
+		return ret;
+	*ambient_new_raw = (s16)read_tmp;
+
+	ret = regmap_read(regmap, MLX90632_RAM_DSP5_EXTENDED_AMBIENT_2, &read_tmp);
+	if (ret < 0)
+		return ret;
+	*ambient_old_raw = (s16)read_tmp;
+
+	return 0;
+}
+
+static int mlx90632_read_object_raw_extended(struct regmap *regmap, s16 *object_new_raw)
+{
+	unsigned int read_tmp;
+	s32 read;
+	int ret;
+
+	ret = regmap_read(regmap, MLX90632_RAM_DSP5_EXTENDED_OBJECT_1, &read_tmp);
+	if (ret < 0)
+		return ret;
+	read = (s16)read_tmp;
+
+	ret = regmap_read(regmap, MLX90632_RAM_DSP5_EXTENDED_OBJECT_2, &read_tmp);
+	if (ret < 0)
+		return ret;
+	read = read - (s16)read_tmp;
+
+	ret = regmap_read(regmap, MLX90632_RAM_DSP5_EXTENDED_OBJECT_3, &read_tmp);
+	if (ret < 0)
+		return ret;
+	read = read - (s16)read_tmp;
+
+	ret = regmap_read(regmap, MLX90632_RAM_DSP5_EXTENDED_OBJECT_4, &read_tmp);
+	if (ret < 0)
+		return ret;
+	read = (read + (s16)read_tmp) / 2;
+
+	ret = regmap_read(regmap, MLX90632_RAM_DSP5_EXTENDED_OBJECT_5, &read_tmp);
+	if (ret < 0)
+		return ret;
+	read = read + (s16)read_tmp;
+
+	ret = regmap_read(regmap, MLX90632_RAM_DSP5_EXTENDED_OBJECT_6, &read_tmp);
+	if (ret < 0)
+		return ret;
+	read = read + (s16)read_tmp;
+
+	if (read > S16_MAX || read < S16_MIN)
+		return -ERANGE;
+
+	*object_new_raw = read;
+
+	return 0;
+}
+
+static int mlx90632_read_all_channel_extended(struct mlx90632_data *data, s16 *object_new_raw,
+					      s16 *ambient_new_raw, s16 *ambient_old_raw)
+{
+	s32 ret, meas;
+
+	mutex_lock(&data->lock);
+	ret = mlx90632_set_meas_type(data->regmap, MLX90632_MTYP_EXTENDED);
+	if (ret < 0)
+		goto read_unlock;
+
+	ret = read_poll_timeout(mlx90632_perform_measurement, meas, meas == 19,
+				50000, 800000, false, data);
+	if (ret != 0)
+		goto read_unlock;
+
+	ret = mlx90632_read_object_raw_extended(data->regmap, object_new_raw);
+	if (ret < 0)
+		goto read_unlock;
+
+	ret = mlx90632_read_ambient_raw_extended(data->regmap, ambient_new_raw, ambient_old_raw);
+
+read_unlock:
+	(void) mlx90632_set_meas_type(data->regmap, MLX90632_MTYP_MEDICAL);
+
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static int mlx90632_read_ee_register(struct regmap *regmap, u16 reg_lsb,
+				     s32 *reg_value)
+{
+	s32 ret;
+	unsigned int read;
+	u32 value;
+
+	ret = regmap_read(regmap, reg_lsb, &read);
+	if (ret < 0)
+		return ret;
+
+	value = read;
+
+	ret = regmap_read(regmap, reg_lsb + 1, &read);
+	if (ret < 0)
+		return ret;
+
+	*reg_value = (read << 16) | (value & 0xffff);
+
+	return 0;
+}
+
+static s64 mlx90632_preprocess_temp_amb(s16 ambient_new_raw,
+					s16 ambient_old_raw, s16 Gb)
+{
+	s64 VR_Ta, kGb, tmp;
+
+	kGb = ((s64)Gb * 1000LL) >> 10ULL;
+	VR_Ta = (s64)ambient_old_raw * 1000000LL +
+		kGb * div64_s64(((s64)ambient_new_raw * 1000LL),
+			(MLX90632_REF_3));
+	tmp = div64_s64(
+			 div64_s64(((s64)ambient_new_raw * 1000000000000LL),
+				   (MLX90632_REF_3)), VR_Ta);
+	return div64_s64(tmp << 19ULL, 1000LL);
+}
+
+static s64 mlx90632_preprocess_temp_obj(s16 object_new_raw, s16 object_old_raw,
+					s16 ambient_new_raw,
+					s16 ambient_old_raw, s16 Ka)
+{
+	s64 VR_IR, kKa, tmp;
+
+	kKa = ((s64)Ka * 1000LL) >> 10ULL;
+	VR_IR = (s64)ambient_old_raw * 1000000LL +
+		kKa * div64_s64(((s64)ambient_new_raw * 1000LL),
+			(MLX90632_REF_3));
+	tmp = div64_s64(
+			div64_s64(((s64)((object_new_raw + object_old_raw) / 2)
+				   * 1000000000000LL), (MLX90632_REF_12)),
+			VR_IR);
+	return div64_s64((tmp << 19ULL), 1000LL);
+}
+
+static s64 mlx90632_preprocess_temp_obj_extended(s16 object_new_raw, s16 ambient_new_raw,
+						 s16 ambient_old_raw, s16 Ka)
+{
+	s64 VR_IR, kKa, tmp;
+
+	kKa = ((s64)Ka * 1000LL) >> 10ULL;
+	VR_IR = (s64)ambient_old_raw * 1000000LL +
+		kKa * div64_s64((s64)ambient_new_raw * 1000LL,
+				MLX90632_REF_3);
+	tmp = div64_s64(
+			div64_s64((s64) object_new_raw * 1000000000000LL, MLX90632_REF_12),
+			VR_IR);
+	return div64_s64(tmp << 19ULL, 1000LL);
+}
+
+static s32 mlx90632_calc_temp_ambient(s16 ambient_new_raw, s16 ambient_old_raw,
+				      s32 P_T, s32 P_R, s32 P_G, s32 P_O, s16 Gb)
+{
+	s64 Asub, Bsub, Ablock, Bblock, Cblock, AMB, sum;
+
+	AMB = mlx90632_preprocess_temp_amb(ambient_new_raw, ambient_old_raw,
+					   Gb);
+	Asub = ((s64)P_T * 10000000000LL) >> 44ULL;
+	Bsub = AMB - (((s64)P_R * 1000LL) >> 8ULL);
+	Ablock = Asub * (Bsub * Bsub);
+	Bblock = (div64_s64(Bsub * 10000000LL, P_G)) << 20ULL;
+	Cblock = ((s64)P_O * 10000000000LL) >> 8ULL;
+
+	sum = div64_s64(Ablock, 1000000LL) + Bblock + Cblock;
+
+	return div64_s64(sum, 10000000LL);
+}
+
+static s32 mlx90632_calc_temp_object_iteration(s32 prev_object_temp, s64 object,
+					       s64 TAdut, s64 TAdut4, s32 Fa, s32 Fb,
+					       s32 Ga, s16 Ha, s16 Hb,
+					       u16 emissivity)
+{
+	s64 calcedKsTO, calcedKsTA, ir_Alpha, Alpha_corr;
+	s64 Ha_customer, Hb_customer;
+
+	Ha_customer = ((s64)Ha * 1000000LL) >> 14ULL;
+	Hb_customer = ((s64)Hb * 100) >> 10ULL;
+
+	calcedKsTO = ((s64)((s64)Ga * (prev_object_temp - 25 * 1000LL)
+			     * 1000LL)) >> 36LL;
+	calcedKsTA = ((s64)(Fb * (TAdut - 25 * 1000000LL))) >> 36LL;
+	Alpha_corr = div64_s64((((s64)(Fa * 10000000000LL) >> 46LL)
+				* Ha_customer), 1000LL);
+	Alpha_corr *= ((s64)(1 * 1000000LL + calcedKsTO + calcedKsTA));
+	Alpha_corr = emissivity * div64_s64(Alpha_corr, 100000LL);
+	Alpha_corr = div64_s64(Alpha_corr, 1000LL);
+	ir_Alpha = div64_s64((s64)object * 10000000LL, Alpha_corr);
+
+	return (int_sqrt64(int_sqrt64(ir_Alpha * 1000000000000LL + TAdut4))
+		- 27315 - Hb_customer) * 10;
+}
+
+static s64 mlx90632_calc_ta4(s64 TAdut, s64 scale)
+{
+	return (div64_s64(TAdut, scale) + 27315) *
+		(div64_s64(TAdut, scale) + 27315) *
+		(div64_s64(TAdut, scale) + 27315) *
+		(div64_s64(TAdut, scale) + 27315);
+}
+
+static s32 mlx90632_calc_temp_object(s64 object, s64 ambient, s32 Ea, s32 Eb,
+				     s32 Fa, s32 Fb, s32 Ga, s16 Ha, s16 Hb,
+				     u16 tmp_emi)
+{
+	s64 kTA, kTA0, TAdut, TAdut4;
+	s64 temp = 25000;
+	s8 i;
+
+	kTA = (Ea * 1000LL) >> 16LL;
+	kTA0 = (Eb * 1000LL) >> 8LL;
+	TAdut = div64_s64(((ambient - kTA0) * 1000000LL), kTA) + 25 * 1000000LL;
+	TAdut4 = mlx90632_calc_ta4(TAdut, 10000LL);
+
+	/* Iterations of calculation as described in datasheet */
+	for (i = 0; i < 5; ++i) {
+		temp = mlx90632_calc_temp_object_iteration(temp, object, TAdut, TAdut4,
+							   Fa, Fb, Ga, Ha, Hb,
+							   tmp_emi);
+	}
+	return temp;
+}
+
+static s32 mlx90632_calc_temp_object_extended(s64 object, s64 ambient, s64 reflected,
+					      s32 Ea, s32 Eb, s32 Fa, s32 Fb, s32 Ga,
+					      s16 Ha, s16 Hb, u16 tmp_emi)
+{
+	s64 kTA, kTA0, TAdut, TAdut4, Tr4, TaTr4;
+	s64 temp = 25000;
+	s8 i;
+
+	kTA = (Ea * 1000LL) >> 16LL;
+	kTA0 = (Eb * 1000LL) >> 8LL;
+	TAdut = div64_s64((ambient - kTA0) * 1000000LL, kTA) + 25 * 1000000LL;
+	Tr4 = mlx90632_calc_ta4(reflected, 10);
+	TAdut4 = mlx90632_calc_ta4(TAdut, 10000LL);
+	TaTr4 = Tr4 - div64_s64(Tr4 - TAdut4, tmp_emi) * 1000;
+
+	/* Iterations of calculation as described in datasheet */
+	for (i = 0; i < 5; ++i) {
+		temp = mlx90632_calc_temp_object_iteration(temp, object, TAdut, TaTr4,
+							   Fa / 2, Fb, Ga, Ha, Hb,
+							   tmp_emi);
+	}
+
+	return temp;
+}
+
+static int mlx90632_calc_object_dsp105(struct mlx90632_data *data, int *val)
+{
+	s32 ret;
+	s32 Ea, Eb, Fa, Fb, Ga;
+	unsigned int read_tmp;
+	s16 Ha, Hb, Gb, Ka;
+	s16 ambient_new_raw, ambient_old_raw, object_new_raw, object_old_raw;
+	s64 object, ambient;
+
+	ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_Ea, &Ea);
+	if (ret < 0)
+		return ret;
+	ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_Eb, &Eb);
+	if (ret < 0)
+		return ret;
+	ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_Fa, &Fa);
+	if (ret < 0)
+		return ret;
+	ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_Fb, &Fb);
+	if (ret < 0)
+		return ret;
+	ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_Ga, &Ga);
+	if (ret < 0)
+		return ret;
+	ret = regmap_read(data->regmap, MLX90632_EE_Ha, &read_tmp);
+	if (ret < 0)
+		return ret;
+	Ha = (s16)read_tmp;
+	ret = regmap_read(data->regmap, MLX90632_EE_Hb, &read_tmp);
+	if (ret < 0)
+		return ret;
+	Hb = (s16)read_tmp;
+	ret = regmap_read(data->regmap, MLX90632_EE_Gb, &read_tmp);
+	if (ret < 0)
+		return ret;
+	Gb = (s16)read_tmp;
+	ret = regmap_read(data->regmap, MLX90632_EE_Ka, &read_tmp);
+	if (ret < 0)
+		return ret;
+	Ka = (s16)read_tmp;
+
+	ret = mlx90632_read_all_channel(data,
+					&ambient_new_raw, &ambient_old_raw,
+					&object_new_raw, &object_old_raw);
+	if (ret < 0)
+		return ret;
+
+	if (object_new_raw > MLX90632_EXTENDED_LIMIT &&
+	    data->mtyp == MLX90632_MTYP_EXTENDED) {
+		ret = mlx90632_read_all_channel_extended(data, &object_new_raw,
+							 &ambient_new_raw, &ambient_old_raw);
+		if (ret < 0)
+			return ret;
+
+		/* Use extended mode calculations */
+		ambient = mlx90632_preprocess_temp_amb(ambient_new_raw,
+						       ambient_old_raw, Gb);
+		object = mlx90632_preprocess_temp_obj_extended(object_new_raw,
+							       ambient_new_raw,
+							       ambient_old_raw, Ka);
+		*val = mlx90632_calc_temp_object_extended(object, ambient,
+							  data->object_ambient_temperature,
+							  Ea, Eb, Fa, Fb, Ga,
+							  Ha, Hb, data->emissivity);
+		return 0;
+	}
+
+	ambient = mlx90632_preprocess_temp_amb(ambient_new_raw,
+					       ambient_old_raw, Gb);
+	object = mlx90632_preprocess_temp_obj(object_new_raw,
+					      object_old_raw,
+					      ambient_new_raw,
+					      ambient_old_raw, Ka);
+
+	*val = mlx90632_calc_temp_object(object, ambient, Ea, Eb, Fa, Fb, Ga,
+					 Ha, Hb, data->emissivity);
+	return 0;
+}
+
+static int mlx90632_calc_ambient_dsp105(struct mlx90632_data *data, int *val)
+{
+	s32 ret;
+	unsigned int read_tmp;
+	s32 PT, PR, PG, PO;
+	s16 Gb;
+	s16 ambient_new_raw, ambient_old_raw;
+
+	ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_P_R, &PR);
+	if (ret < 0)
+		return ret;
+	ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_P_G, &PG);
+	if (ret < 0)
+		return ret;
+	ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_P_T, &PT);
+	if (ret < 0)
+		return ret;
+	ret = mlx90632_read_ee_register(data->regmap, MLX90632_EE_P_O, &PO);
+	if (ret < 0)
+		return ret;
+	ret = regmap_read(data->regmap, MLX90632_EE_Gb, &read_tmp);
+	if (ret < 0)
+		return ret;
+	Gb = (s16)read_tmp;
+
+	ret = mlx90632_read_ambient_raw(data->regmap, &ambient_new_raw,
+					&ambient_old_raw);
+	if (ret < 0)
+		return ret;
+	*val = mlx90632_calc_temp_ambient(ambient_new_raw, ambient_old_raw,
+					  PT, PR, PG, PO, Gb);
+	return ret;
+}
+
+static int mlx90632_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *channel, int *val,
+			     int *val2, long mask)
+{
+	struct mlx90632_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (channel->channel2) {
+		case IIO_MOD_TEMP_AMBIENT:
+			ret = mlx90632_calc_ambient_dsp105(data, val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		case IIO_MOD_TEMP_OBJECT:
+			ret = mlx90632_calc_object_dsp105(data, val);
+			if (ret < 0)
+				return ret;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_CALIBEMISSIVITY:
+		if (data->emissivity == 1000) {
+			*val = 1;
+			*val2 = 0;
+		} else {
+			*val = 0;
+			*val2 = data->emissivity * 1000;
+		}
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_CALIBAMBIENT:
+		*val = data->object_ambient_temperature;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mlx90632_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *channel, int val,
+			      int val2, long mask)
+{
+	struct mlx90632_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBEMISSIVITY:
+		/* Confirm we are within 0 and 1.0 */
+		if (val < 0 || val2 < 0 || val > 1 ||
+		    (val == 1 && val2 != 0))
+			return -EINVAL;
+		data->emissivity = val * 1000 + val2 / 1000;
+		return 0;
+	case IIO_CHAN_INFO_CALIBAMBIENT:
+		data->object_ambient_temperature = val;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_chan_spec mlx90632_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.modified = 1,
+		.channel2 = IIO_MOD_TEMP_AMBIENT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+	},
+	{
+		.type = IIO_TEMP,
+		.modified = 1,
+		.channel2 = IIO_MOD_TEMP_OBJECT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+			BIT(IIO_CHAN_INFO_CALIBEMISSIVITY) | BIT(IIO_CHAN_INFO_CALIBAMBIENT),
+	},
+};
+
+static const struct iio_info mlx90632_info = {
+	.read_raw = mlx90632_read_raw,
+	.write_raw = mlx90632_write_raw,
+};
+
+static int mlx90632_sleep(struct mlx90632_data *data)
+{
+	regcache_mark_dirty(data->regmap);
+
+	dev_dbg(&data->client->dev, "Requesting sleep");
+	return mlx90632_pwr_set_sleep_step(data->regmap);
+}
+
+static int mlx90632_wakeup(struct mlx90632_data *data)
+{
+	int ret;
+
+	ret = regcache_sync(data->regmap);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Failed to sync regmap registers: %d\n", ret);
+		return ret;
+	}
+
+	dev_dbg(&data->client->dev, "Requesting wake-up\n");
+	return mlx90632_pwr_continuous(data->regmap);
+}
+
+static int mlx90632_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct mlx90632_data *mlx90632;
+	struct regmap *regmap;
+	int ret;
+	unsigned int read;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*mlx90632));
+	if (!indio_dev) {
+		dev_err(&client->dev, "Failed to allocate device\n");
+		return -ENOMEM;
+	}
+
+	regmap = devm_regmap_init_i2c(client, &mlx90632_regmap);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret);
+		return ret;
+	}
+
+	mlx90632 = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	mlx90632->client = client;
+	mlx90632->regmap = regmap;
+	mlx90632->mtyp = MLX90632_MTYP_MEDICAL;
+
+	mutex_init(&mlx90632->lock);
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &mlx90632_info;
+	indio_dev->channels = mlx90632_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mlx90632_channels);
+
+	ret = mlx90632_wakeup(mlx90632);
+	if (ret < 0) {
+		dev_err(&client->dev, "Wakeup failed: %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_read(mlx90632->regmap, MLX90632_EE_VERSION, &read);
+	if (ret < 0) {
+		dev_err(&client->dev, "read of version failed: %d\n", ret);
+		return ret;
+	}
+	read = read & MLX90632_ID_MASK;
+	if (read == MLX90632_ID_MEDICAL) {
+		dev_dbg(&client->dev,
+			"Detected Medical EEPROM calibration %x\n", read);
+	} else if (read == MLX90632_ID_CONSUMER) {
+		dev_dbg(&client->dev,
+			"Detected Consumer EEPROM calibration %x\n", read);
+	} else if (read == MLX90632_ID_EXTENDED) {
+		dev_dbg(&client->dev,
+			"Detected Extended range EEPROM calibration %x\n", read);
+		mlx90632->mtyp = MLX90632_MTYP_EXTENDED;
+	} else if ((read & MLX90632_DSP_MASK) == MLX90632_DSP_VERSION) {
+		dev_dbg(&client->dev,
+			"Detected Unknown EEPROM calibration %x\n", read);
+	} else {
+		dev_err(&client->dev,
+			"Wrong DSP version %x (expected %x)\n",
+			read, MLX90632_DSP_VERSION);
+		return -EPROTONOSUPPORT;
+	}
+
+	mlx90632->emissivity = 1000;
+	mlx90632->object_ambient_temperature = 25000; /* 25 degrees milliCelsius */
+
+	pm_runtime_disable(&client->dev);
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret < 0) {
+		mlx90632_sleep(mlx90632);
+		return ret;
+	}
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev, MLX90632_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	return iio_device_register(indio_dev);
+}
+
+static int mlx90632_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct mlx90632_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+	pm_runtime_put_noidle(&client->dev);
+
+	mlx90632_sleep(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id mlx90632_id[] = {
+	{ "mlx90632", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mlx90632_id);
+
+static const struct of_device_id mlx90632_of_match[] = {
+	{ .compatible = "melexis,mlx90632" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mlx90632_of_match);
+
+static int __maybe_unused mlx90632_pm_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mlx90632_data *data = iio_priv(indio_dev);
+
+	return mlx90632_sleep(data);
+}
+
+static int __maybe_unused mlx90632_pm_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct mlx90632_data *data = iio_priv(indio_dev);
+
+	return mlx90632_wakeup(data);
+}
+
+static UNIVERSAL_DEV_PM_OPS(mlx90632_pm_ops, mlx90632_pm_suspend,
+			    mlx90632_pm_resume, NULL);
+
+static struct i2c_driver mlx90632_driver = {
+	.driver = {
+		.name	= "mlx90632",
+		.of_match_table = mlx90632_of_match,
+		.pm	= &mlx90632_pm_ops,
+	},
+	.probe = mlx90632_probe,
+	.remove = mlx90632_remove,
+	.id_table = mlx90632_id,
+};
+module_i2c_driver(mlx90632_driver);
+
+MODULE_AUTHOR("Crt Mori <cmo@melexis.com>");
+MODULE_DESCRIPTION("Melexis MLX90632 contactless Infra Red temperature sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/temperature/tmp006.c b/drivers/iio/temperature/tmp006.c
new file mode 100644
index 000000000..54976c7da
--- /dev/null
+++ b/drivers/iio/temperature/tmp006.c
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tmp006.c - Support for TI TMP006 IR thermopile sensor
+ *
+ * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net>
+ *
+ * Driver for the Texas Instruments I2C 16-bit IR thermopile sensor
+ *
+ * (7-bit I2C slave address 0x40, changeable via ADR pins)
+ *
+ * TODO: data ready irq
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define TMP006_VOBJECT 0x00
+#define TMP006_TAMBIENT 0x01
+#define TMP006_CONFIG 0x02
+#define TMP006_MANUFACTURER_ID 0xfe
+#define TMP006_DEVICE_ID 0xff
+
+#define TMP006_TAMBIENT_SHIFT 2
+
+#define TMP006_CONFIG_RESET BIT(15)
+#define TMP006_CONFIG_DRDY_EN BIT(8)
+#define TMP006_CONFIG_DRDY BIT(7)
+
+#define TMP006_CONFIG_MOD_MASK GENMASK(14, 12)
+
+#define TMP006_CONFIG_CR_MASK GENMASK(11, 9)
+#define TMP006_CONFIG_CR_SHIFT 9
+
+#define TMP006_MANUFACTURER_MAGIC 0x5449
+#define TMP006_DEVICE_MAGIC 0x0067
+
+struct tmp006_data {
+	struct i2c_client *client;
+	u16 config;
+};
+
+static int tmp006_read_measurement(struct tmp006_data *data, u8 reg)
+{
+	s32 ret;
+	int tries = 50;
+
+	while (tries-- > 0) {
+		ret = i2c_smbus_read_word_swapped(data->client,
+			TMP006_CONFIG);
+		if (ret < 0)
+			return ret;
+		if (ret & TMP006_CONFIG_DRDY)
+			break;
+		msleep(100);
+	}
+
+	if (tries < 0)
+		return -EIO;
+
+	return i2c_smbus_read_word_swapped(data->client, reg);
+}
+
+static const int tmp006_freqs[5][2] = { {4, 0}, {2, 0}, {1, 0},
+					{0, 500000}, {0, 250000} };
+
+static int tmp006_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *channel, int *val,
+			    int *val2, long mask)
+{
+	struct tmp006_data *data = iio_priv(indio_dev);
+	s32 ret;
+	int cr;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (channel->type == IIO_VOLTAGE) {
+			/* LSB is 156.25 nV */
+			ret = tmp006_read_measurement(data, TMP006_VOBJECT);
+			if (ret < 0)
+				return ret;
+			*val = sign_extend32(ret, 15);
+		} else if (channel->type == IIO_TEMP) {
+			/* LSB is 0.03125 degrees Celsius */
+			ret = tmp006_read_measurement(data, TMP006_TAMBIENT);
+			if (ret < 0)
+				return ret;
+			*val = sign_extend32(ret, 15) >> TMP006_TAMBIENT_SHIFT;
+		} else {
+			break;
+		}
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (channel->type == IIO_VOLTAGE) {
+			*val = 0;
+			*val2 = 156250;
+		} else if (channel->type == IIO_TEMP) {
+			*val = 31;
+			*val2 = 250000;
+		} else {
+			break;
+		}
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		cr = (data->config & TMP006_CONFIG_CR_MASK)
+			>> TMP006_CONFIG_CR_SHIFT;
+		*val = tmp006_freqs[cr][0];
+		*val2 = tmp006_freqs[cr][1];
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int tmp006_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val,
+			    int val2,
+			    long mask)
+{
+	struct tmp006_data *data = iio_priv(indio_dev);
+	int i;
+
+	if (mask != IIO_CHAN_INFO_SAMP_FREQ)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(tmp006_freqs); i++)
+		if ((val == tmp006_freqs[i][0]) &&
+		    (val2 == tmp006_freqs[i][1])) {
+			data->config &= ~TMP006_CONFIG_CR_MASK;
+			data->config |= i << TMP006_CONFIG_CR_SHIFT;
+
+			return i2c_smbus_write_word_swapped(data->client,
+							    TMP006_CONFIG,
+							    data->config);
+
+		}
+	return -EINVAL;
+}
+
+static IIO_CONST_ATTR(sampling_frequency_available, "4 2 1 0.5 0.25");
+
+static struct attribute *tmp006_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tmp006_attribute_group = {
+	.attrs = tmp006_attributes,
+};
+
+static const struct iio_chan_spec tmp006_channels[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+	}
+};
+
+static const struct iio_info tmp006_info = {
+	.read_raw = tmp006_read_raw,
+	.write_raw = tmp006_write_raw,
+	.attrs = &tmp006_attribute_group,
+};
+
+static bool tmp006_check_identification(struct i2c_client *client)
+{
+	int mid, did;
+
+	mid = i2c_smbus_read_word_swapped(client, TMP006_MANUFACTURER_ID);
+	if (mid < 0)
+		return false;
+
+	did = i2c_smbus_read_word_swapped(client, TMP006_DEVICE_ID);
+	if (did < 0)
+		return false;
+
+	return mid == TMP006_MANUFACTURER_MAGIC && did == TMP006_DEVICE_MAGIC;
+}
+
+static int tmp006_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct tmp006_data *data;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -EOPNOTSUPP;
+
+	if (!tmp006_check_identification(client)) {
+		dev_err(&client->dev, "no TMP006 sensor\n");
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	indio_dev->name = dev_name(&client->dev);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &tmp006_info;
+
+	indio_dev->channels = tmp006_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tmp006_channels);
+
+	ret = i2c_smbus_read_word_swapped(data->client, TMP006_CONFIG);
+	if (ret < 0)
+		return ret;
+	data->config = ret;
+
+	return iio_device_register(indio_dev);
+}
+
+static int tmp006_powerdown(struct tmp006_data *data)
+{
+	return i2c_smbus_write_word_swapped(data->client, TMP006_CONFIG,
+		data->config & ~TMP006_CONFIG_MOD_MASK);
+}
+
+static int tmp006_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	tmp006_powerdown(iio_priv(indio_dev));
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tmp006_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	return tmp006_powerdown(iio_priv(indio_dev));
+}
+
+static int tmp006_resume(struct device *dev)
+{
+	struct tmp006_data *data = iio_priv(i2c_get_clientdata(
+		to_i2c_client(dev)));
+	return i2c_smbus_write_word_swapped(data->client, TMP006_CONFIG,
+		data->config | TMP006_CONFIG_MOD_MASK);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tmp006_pm_ops, tmp006_suspend, tmp006_resume);
+
+static const struct i2c_device_id tmp006_id[] = {
+	{ "tmp006", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tmp006_id);
+
+static struct i2c_driver tmp006_driver = {
+	.driver = {
+		.name	= "tmp006",
+		.pm	= &tmp006_pm_ops,
+	},
+	.probe = tmp006_probe,
+	.remove = tmp006_remove,
+	.id_table = tmp006_id,
+};
+module_i2c_driver(tmp006_driver);
+
+MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("TI TMP006 IR thermopile sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/temperature/tmp007.c b/drivers/iio/temperature/tmp007.c
new file mode 100644
index 000000000..ad2b35c65
--- /dev/null
+++ b/drivers/iio/temperature/tmp007.c
@@ -0,0 +1,592 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tmp007.c - Support for TI TMP007 IR thermopile sensor with integrated math engine
+ *
+ * Copyright (c) 2017 Manivannan Sadhasivam <manivannanece23@gmail.com>
+ *
+ * Driver for the Texas Instruments I2C 16-bit IR thermopile sensor
+ *
+ * (7-bit I2C slave address (0x40 - 0x47), changeable via ADR pins)
+ *
+ * Note:
+ * 1. This driver assumes that the sensor has been calibrated beforehand
+ * 2. Limit threshold events are enabled at the start
+ * 3. Operating mode: INT
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+#include <linux/mod_devicetable.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+
+#define TMP007_TDIE 0x01
+#define TMP007_CONFIG 0x02
+#define TMP007_TOBJECT 0x03
+#define TMP007_STATUS 0x04
+#define TMP007_STATUS_MASK 0x05
+#define TMP007_TOBJ_HIGH_LIMIT 0x06
+#define TMP007_TOBJ_LOW_LIMIT 0x07
+#define TMP007_TDIE_HIGH_LIMIT 0x08
+#define TMP007_TDIE_LOW_LIMIT 0x09
+#define TMP007_MANUFACTURER_ID 0x1e
+#define TMP007_DEVICE_ID 0x1f
+
+#define TMP007_CONFIG_CONV_EN BIT(12)
+#define TMP007_CONFIG_TC_EN BIT(6)
+#define TMP007_CONFIG_CR_MASK GENMASK(11, 9)
+#define TMP007_CONFIG_ALERT_EN BIT(8)
+#define TMP007_CONFIG_CR_SHIFT 9
+
+/* Status register flags */
+#define TMP007_STATUS_ALERT BIT(15)
+#define TMP007_STATUS_CONV_READY BIT(14)
+#define TMP007_STATUS_OHF BIT(13)
+#define TMP007_STATUS_OLF BIT(12)
+#define TMP007_STATUS_LHF BIT(11)
+#define TMP007_STATUS_LLF BIT(10)
+#define TMP007_STATUS_DATA_VALID BIT(9)
+
+#define TMP007_MANUFACTURER_MAGIC 0x5449
+#define TMP007_DEVICE_MAGIC 0x0078
+
+#define TMP007_TEMP_SHIFT 2
+
+struct tmp007_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u16 config;
+	u16 status_mask;
+};
+
+static const int tmp007_avgs[5][2] = { {4, 0}, {2, 0}, {1, 0},
+					{0, 500000}, {0, 250000} };
+
+static int tmp007_read_temperature(struct tmp007_data *data, u8 reg)
+{
+	s32 ret;
+	int tries = 50;
+
+	while (tries-- > 0) {
+		ret = i2c_smbus_read_word_swapped(data->client,
+			TMP007_STATUS);
+		if (ret < 0)
+			return ret;
+		if ((ret & TMP007_STATUS_CONV_READY) &&
+			!(ret & TMP007_STATUS_DATA_VALID))
+				break;
+		msleep(100);
+	}
+
+	if (tries < 0)
+		return -EIO;
+
+	return i2c_smbus_read_word_swapped(data->client, reg);
+}
+
+static int tmp007_powerdown(struct tmp007_data *data)
+{
+	return i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG,
+			data->config & ~TMP007_CONFIG_CONV_EN);
+}
+
+static int tmp007_read_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *channel, int *val,
+		int *val2, long mask)
+{
+	struct tmp007_data *data = iio_priv(indio_dev);
+	s32 ret;
+	int conv_rate;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (channel->channel2) {
+		case IIO_MOD_TEMP_AMBIENT: /* LSB: 0.03125 degree Celsius */
+			ret = i2c_smbus_read_word_swapped(data->client, TMP007_TDIE);
+			if (ret < 0)
+				return ret;
+			break;
+		case IIO_MOD_TEMP_OBJECT:
+			ret = tmp007_read_temperature(data, TMP007_TOBJECT);
+			if (ret < 0)
+				return ret;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		*val = sign_extend32(ret, 15) >> TMP007_TEMP_SHIFT;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 31;
+		*val2 = 250000;
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		conv_rate = (data->config & TMP007_CONFIG_CR_MASK)
+				>> TMP007_CONFIG_CR_SHIFT;
+		*val = tmp007_avgs[conv_rate][0];
+		*val2 = tmp007_avgs[conv_rate][1];
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tmp007_write_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *channel, int val,
+		int val2, long mask)
+{
+	struct tmp007_data *data = iio_priv(indio_dev);
+	int i;
+	u16 tmp;
+
+	if (mask == IIO_CHAN_INFO_SAMP_FREQ) {
+		for (i = 0; i < ARRAY_SIZE(tmp007_avgs); i++) {
+			if ((val == tmp007_avgs[i][0]) &&
+			(val2 == tmp007_avgs[i][1])) {
+				tmp = data->config & ~TMP007_CONFIG_CR_MASK;
+				tmp |= (i << TMP007_CONFIG_CR_SHIFT);
+
+				return i2c_smbus_write_word_swapped(data->client,
+								TMP007_CONFIG,
+								data->config = tmp);
+			}
+		}
+	}
+
+	return -EINVAL;
+}
+
+static irqreturn_t tmp007_interrupt_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct tmp007_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_read_word_swapped(data->client, TMP007_STATUS);
+	if ((ret < 0) || !(ret & (TMP007_STATUS_OHF | TMP007_STATUS_OLF |
+				TMP007_STATUS_LHF | TMP007_STATUS_LLF)))
+		return IRQ_NONE;
+
+	if (ret & TMP007_STATUS_OHF)
+		iio_push_event(indio_dev,
+				IIO_MOD_EVENT_CODE(IIO_TEMP, 0,
+					IIO_MOD_TEMP_OBJECT,
+					IIO_EV_TYPE_THRESH,
+					IIO_EV_DIR_RISING),
+				iio_get_time_ns(indio_dev));
+
+	if (ret & TMP007_STATUS_OLF)
+		iio_push_event(indio_dev,
+				IIO_MOD_EVENT_CODE(IIO_TEMP, 0,
+					IIO_MOD_TEMP_OBJECT,
+					IIO_EV_TYPE_THRESH,
+					IIO_EV_DIR_FALLING),
+				iio_get_time_ns(indio_dev));
+
+	if (ret & TMP007_STATUS_LHF)
+		iio_push_event(indio_dev,
+				IIO_MOD_EVENT_CODE(IIO_TEMP, 0,
+					IIO_MOD_TEMP_AMBIENT,
+					IIO_EV_TYPE_THRESH,
+					IIO_EV_DIR_RISING),
+				iio_get_time_ns(indio_dev));
+
+	if (ret & TMP007_STATUS_LLF)
+		iio_push_event(indio_dev,
+				IIO_MOD_EVENT_CODE(IIO_TEMP, 0,
+					IIO_MOD_TEMP_AMBIENT,
+					IIO_EV_TYPE_THRESH,
+					IIO_EV_DIR_FALLING),
+				iio_get_time_ns(indio_dev));
+
+	return IRQ_HANDLED;
+}
+
+static int tmp007_write_event_config(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, int state)
+{
+	struct tmp007_data *data = iio_priv(indio_dev);
+	unsigned int status_mask;
+	int ret;
+
+	switch (chan->channel2) {
+	case IIO_MOD_TEMP_AMBIENT:
+	if (dir == IIO_EV_DIR_RISING)
+			status_mask = TMP007_STATUS_LHF;
+		else
+			status_mask = TMP007_STATUS_LLF;
+		break;
+	case IIO_MOD_TEMP_OBJECT:
+		if (dir == IIO_EV_DIR_RISING)
+			status_mask = TMP007_STATUS_OHF;
+		else
+			status_mask = TMP007_STATUS_OLF;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->lock);
+	ret = i2c_smbus_read_word_swapped(data->client, TMP007_STATUS_MASK);
+	mutex_unlock(&data->lock);
+	if (ret < 0)
+		return ret;
+
+	if (state)
+		ret |= status_mask;
+	else
+		ret &= ~status_mask;
+
+	return i2c_smbus_write_word_swapped(data->client, TMP007_STATUS_MASK,
+					data->status_mask = ret);
+}
+
+static int tmp007_read_event_config(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir)
+{
+	struct tmp007_data *data = iio_priv(indio_dev);
+	unsigned int mask;
+
+	switch (chan->channel2) {
+	case IIO_MOD_TEMP_AMBIENT:
+		if (dir == IIO_EV_DIR_RISING)
+			mask = TMP007_STATUS_LHF;
+		else
+			mask = TMP007_STATUS_LLF;
+		break;
+	case IIO_MOD_TEMP_OBJECT:
+		if (dir == IIO_EV_DIR_RISING)
+			mask = TMP007_STATUS_OHF;
+		else
+			mask = TMP007_STATUS_OLF;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return !!(data->status_mask & mask);
+}
+
+static int tmp007_read_thresh(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, enum iio_event_info info,
+		int *val, int *val2)
+{
+	struct tmp007_data *data = iio_priv(indio_dev);
+	int ret;
+	u8 reg;
+
+	switch (chan->channel2) {
+	case IIO_MOD_TEMP_AMBIENT: /* LSB: 0.5 degree Celsius */
+		if (dir == IIO_EV_DIR_RISING)
+			reg = TMP007_TDIE_HIGH_LIMIT;
+		else
+			reg = TMP007_TDIE_LOW_LIMIT;
+		break;
+	case IIO_MOD_TEMP_OBJECT:
+		if (dir == IIO_EV_DIR_RISING)
+			reg = TMP007_TOBJ_HIGH_LIMIT;
+	else
+			reg = TMP007_TOBJ_LOW_LIMIT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	ret = i2c_smbus_read_word_swapped(data->client, reg);
+	if (ret < 0)
+		return ret;
+
+	/* Shift length 7 bits = 6(15:6) + 1(0.5 LSB) */
+	*val = sign_extend32(ret, 15) >> 7;
+
+	return IIO_VAL_INT;
+}
+
+static int tmp007_write_thresh(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan, enum iio_event_type type,
+		enum iio_event_direction dir, enum iio_event_info info,
+		int val, int val2)
+{
+	struct tmp007_data *data = iio_priv(indio_dev);
+	u8 reg;
+
+	switch (chan->channel2) {
+	case IIO_MOD_TEMP_AMBIENT:
+		if (dir == IIO_EV_DIR_RISING)
+			reg = TMP007_TDIE_HIGH_LIMIT;
+		else
+			reg = TMP007_TDIE_LOW_LIMIT;
+		break;
+	case IIO_MOD_TEMP_OBJECT:
+		if (dir == IIO_EV_DIR_RISING)
+			reg = TMP007_TOBJ_HIGH_LIMIT;
+		else
+			reg = TMP007_TOBJ_LOW_LIMIT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Full scale threshold value is +/- 256 degree Celsius */
+	if (val < -256 || val > 255)
+		return -EINVAL;
+
+	/* Shift length 7 bits = 6(15:6) + 1(0.5 LSB) */
+	return i2c_smbus_write_word_swapped(data->client, reg, (val << 7));
+}
+
+static IIO_CONST_ATTR(sampling_frequency_available, "4 2 1 0.5 0.25");
+
+static struct attribute *tmp007_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group tmp007_attribute_group = {
+	.attrs = tmp007_attributes,
+};
+
+static const struct iio_event_spec tmp007_obj_event[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_event_spec tmp007_die_event[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE) |
+			BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec tmp007_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.modified = 1,
+		.channel2 = IIO_MOD_TEMP_AMBIENT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.event_spec = tmp007_die_event,
+		.num_event_specs = ARRAY_SIZE(tmp007_die_event),
+	},
+	{
+		.type = IIO_TEMP,
+		.modified = 1,
+		.channel2 = IIO_MOD_TEMP_OBJECT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.event_spec = tmp007_obj_event,
+		.num_event_specs = ARRAY_SIZE(tmp007_obj_event),
+	}
+};
+
+static const struct iio_info tmp007_info = {
+	.read_raw = tmp007_read_raw,
+	.write_raw = tmp007_write_raw,
+	.read_event_config = tmp007_read_event_config,
+	.write_event_config = tmp007_write_event_config,
+	.read_event_value = tmp007_read_thresh,
+	.write_event_value = tmp007_write_thresh,
+	.attrs = &tmp007_attribute_group,
+};
+
+static bool tmp007_identify(struct i2c_client *client)
+{
+	int manf_id, dev_id;
+
+	manf_id = i2c_smbus_read_word_swapped(client, TMP007_MANUFACTURER_ID);
+	if (manf_id < 0)
+		return false;
+
+	dev_id = i2c_smbus_read_word_swapped(client, TMP007_DEVICE_ID);
+	if (dev_id < 0)
+		return false;
+
+	return (manf_id == TMP007_MANUFACTURER_MAGIC && dev_id == TMP007_DEVICE_MAGIC);
+}
+
+static int tmp007_probe(struct i2c_client *client,
+			const struct i2c_device_id *tmp007_id)
+{
+	struct tmp007_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
+		return -EOPNOTSUPP;
+
+	if (!tmp007_identify(client)) {
+		dev_err(&client->dev, "TMP007 not found\n");
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	indio_dev->name = "tmp007";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &tmp007_info;
+
+	indio_dev->channels = tmp007_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tmp007_channels);
+
+	/*
+	 * Set Configuration register:
+	 * 1. Conversion ON
+	 * 2. ALERT enable
+	 * 3. Transient correction enable
+	 */
+
+	ret = i2c_smbus_read_word_swapped(data->client, TMP007_CONFIG);
+	if (ret < 0)
+		return ret;
+
+	data->config = ret;
+	data->config |= (TMP007_CONFIG_CONV_EN | TMP007_CONFIG_ALERT_EN | TMP007_CONFIG_TC_EN);
+
+	ret = i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG,
+					data->config);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Only the following flags can activate ALERT pin. Data conversion/validity flags
+	 * flags can still be polled for getting temperature data
+	 *
+	 * Set Status Mask register:
+	 * 1. Object temperature high limit enable
+	 * 2. Object temperature low limit enable
+	 * 3. TDIE temperature high limit enable
+	 * 4. TDIE temperature low limit enable
+	 */
+
+	ret = i2c_smbus_read_word_swapped(data->client, TMP007_STATUS_MASK);
+	if (ret < 0)
+		goto error_powerdown;
+
+	data->status_mask = ret;
+	data->status_mask |= (TMP007_STATUS_OHF | TMP007_STATUS_OLF
+				| TMP007_STATUS_LHF | TMP007_STATUS_LLF);
+
+	ret = i2c_smbus_write_word_swapped(data->client, TMP007_STATUS_MASK, data->status_mask);
+	if (ret < 0)
+		goto error_powerdown;
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+				NULL, tmp007_interrupt_handler,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				tmp007_id->name, indio_dev);
+		if (ret) {
+			dev_err(&client->dev, "irq request error %d\n", -ret);
+			goto error_powerdown;
+		}
+	}
+
+	return iio_device_register(indio_dev);
+
+error_powerdown:
+	tmp007_powerdown(data);
+
+	return ret;
+}
+
+static int tmp007_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct tmp007_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	tmp007_powerdown(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tmp007_suspend(struct device *dev)
+{
+	struct tmp007_data *data = iio_priv(i2c_get_clientdata(
+			to_i2c_client(dev)));
+
+	return tmp007_powerdown(data);
+}
+
+static int tmp007_resume(struct device *dev)
+{
+	struct tmp007_data *data = iio_priv(i2c_get_clientdata(
+			to_i2c_client(dev)));
+
+	return i2c_smbus_write_word_swapped(data->client, TMP007_CONFIG,
+			data->config | TMP007_CONFIG_CONV_EN);
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tmp007_pm_ops, tmp007_suspend, tmp007_resume);
+
+static const struct of_device_id tmp007_of_match[] = {
+	{ .compatible = "ti,tmp007", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tmp007_of_match);
+
+static const struct i2c_device_id tmp007_id[] = {
+	{ "tmp007", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tmp007_id);
+
+static struct i2c_driver tmp007_driver = {
+	.driver = {
+		.name	= "tmp007",
+		.of_match_table = tmp007_of_match,
+		.pm	= &tmp007_pm_ops,
+	},
+	.probe		= tmp007_probe,
+	.remove		= tmp007_remove,
+	.id_table	= tmp007_id,
+};
+module_i2c_driver(tmp007_driver);
+
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannanece23@gmail.com>");
+MODULE_DESCRIPTION("TI TMP007 IR thermopile sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/temperature/tsys01.c b/drivers/iio/temperature/tsys01.c
new file mode 100644
index 000000000..bbfbad9a8
--- /dev/null
+++ b/drivers/iio/temperature/tsys01.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tsys01.c - Support for Measurement-Specialties tsys01 temperature sensor
+ *
+ * Copyright (c) 2015 Measurement-Specialties
+ *
+ * Datasheet:
+ *  http://www.meas-spec.com/downloads/TSYS01_Digital_Temperature_Sensor.pdf
+ */
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/stat.h>
+#include "../common/ms_sensors/ms_sensors_i2c.h"
+
+/* TSYS01 Commands */
+#define TSYS01_RESET				0x1E
+#define TSYS01_CONVERSION_START			0x48
+#define TSYS01_ADC_READ				0x00
+#define TSYS01_PROM_READ			0xA0
+
+#define TSYS01_PROM_WORDS_NB			8
+
+struct tsys01_dev {
+	void *client;
+	struct mutex lock; /* lock during conversion */
+
+	int (*reset)(void *cli, u8 cmd, unsigned int delay);
+	int (*convert_and_read)(void *cli, u8 conv, u8 rd,
+				unsigned int delay, u32 *adc);
+	int (*read_prom_word)(void *cli, int cmd, u16 *word);
+
+	u16 prom[TSYS01_PROM_WORDS_NB];
+};
+
+/* Multiplication coefficients for temperature computation */
+static const int coeff_mul[] = { -1500000, 1000000, -2000000,
+				 4000000, -2000000 };
+
+static int tsys01_read_temperature(struct iio_dev *indio_dev,
+				   s32 *temperature)
+{
+	int ret, i;
+	u32 adc;
+	s64 temp = 0;
+	struct tsys01_dev *dev_data = iio_priv(indio_dev);
+
+	mutex_lock(&dev_data->lock);
+	ret = dev_data->convert_and_read(dev_data->client,
+					 TSYS01_CONVERSION_START,
+					 TSYS01_ADC_READ, 9000, &adc);
+	mutex_unlock(&dev_data->lock);
+	if (ret)
+		return ret;
+
+	adc >>= 8;
+
+	/* Temperature algorithm */
+	for (i = 4; i > 0; i--) {
+		temp += coeff_mul[i] *
+			(s64)dev_data->prom[5 - i];
+		temp *= (s64)adc;
+		temp = div64_s64(temp, 100000);
+	}
+	temp *= 10;
+	temp += coeff_mul[0] * (s64)dev_data->prom[5];
+	temp = div64_s64(temp, 100000);
+
+	*temperature = temp;
+
+	return 0;
+}
+
+static int tsys01_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *channel, int *val,
+			   int *val2, long mask)
+{
+	int ret;
+	s32 temperature;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (channel->type) {
+		case IIO_TEMP:	/* in milli °C */
+			ret = tsys01_read_temperature(indio_dev, &temperature);
+			if (ret)
+				return ret;
+			*val = temperature;
+
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_chan_spec tsys01_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_PROCESSED),
+	}
+};
+
+static const struct iio_info tsys01_info = {
+	.read_raw = tsys01_read_raw,
+};
+
+static bool tsys01_crc_valid(u16 *n_prom)
+{
+	u8 cnt;
+	u8 sum = 0;
+
+	for (cnt = 0; cnt < TSYS01_PROM_WORDS_NB; cnt++)
+		sum += ((n_prom[0] >> 8) + (n_prom[0] & 0xFF));
+
+	return (sum == 0);
+}
+
+static int tsys01_read_prom(struct iio_dev *indio_dev)
+{
+	int i, ret;
+	struct tsys01_dev *dev_data = iio_priv(indio_dev);
+	char buf[7 * TSYS01_PROM_WORDS_NB + 1];
+	char *ptr = buf;
+
+	for (i = 0; i < TSYS01_PROM_WORDS_NB; i++) {
+		ret = dev_data->read_prom_word(dev_data->client,
+					       TSYS01_PROM_READ + (i << 1),
+					       &dev_data->prom[i]);
+		if (ret)
+			return ret;
+
+		ret = sprintf(ptr, "0x%04x ", dev_data->prom[i]);
+		ptr += ret;
+	}
+
+	if (!tsys01_crc_valid(dev_data->prom)) {
+		dev_err(&indio_dev->dev, "prom crc check error\n");
+		return -ENODEV;
+	}
+	*ptr = 0;
+	dev_info(&indio_dev->dev, "PROM coefficients : %s\n", buf);
+
+	return 0;
+}
+
+static int tsys01_probe(struct iio_dev *indio_dev, struct device *dev)
+{
+	int ret;
+	struct tsys01_dev *dev_data = iio_priv(indio_dev);
+
+	mutex_init(&dev_data->lock);
+
+	indio_dev->info = &tsys01_info;
+	indio_dev->name = dev->driver->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = tsys01_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tsys01_channels);
+
+	ret = dev_data->reset(dev_data->client, TSYS01_RESET, 3000);
+	if (ret)
+		return ret;
+
+	ret = tsys01_read_prom(indio_dev);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static int tsys01_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct tsys01_dev *dev_data;
+	struct iio_dev *indio_dev;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WORD_DATA |
+				     I2C_FUNC_SMBUS_WRITE_BYTE |
+				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+		dev_err(&client->dev,
+			"Adapter does not support some i2c transaction\n");
+		return -EOPNOTSUPP;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	dev_data = iio_priv(indio_dev);
+	dev_data->client = client;
+	dev_data->reset = ms_sensors_reset;
+	dev_data->read_prom_word = ms_sensors_read_prom_word;
+	dev_data->convert_and_read = ms_sensors_convert_and_read;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	return tsys01_probe(indio_dev, &client->dev);
+}
+
+static const struct i2c_device_id tsys01_id[] = {
+	{"tsys01", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, tsys01_id);
+
+static const struct of_device_id tsys01_of_match[] = {
+	{ .compatible = "meas,tsys01", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, tsys01_of_match);
+
+static struct i2c_driver tsys01_driver = {
+	.probe = tsys01_i2c_probe,
+	.id_table = tsys01_id,
+	.driver = {
+		   .name = "tsys01",
+		   .of_match_table = tsys01_of_match,
+		   },
+};
+
+module_i2c_driver(tsys01_driver);
+
+MODULE_DESCRIPTION("Measurement-Specialties tsys01 temperature driver");
+MODULE_AUTHOR("William Markezana <william.markezana@meas-spec.com>");
+MODULE_AUTHOR("Ludovic Tancerel <ludovic.tancerel@maplehightech.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/temperature/tsys02d.c b/drivers/iio/temperature/tsys02d.c
new file mode 100644
index 000000000..fc96e5f9d
--- /dev/null
+++ b/drivers/iio/temperature/tsys02d.c
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * tsys02d.c - Support for Measurement-Specialties tsys02d temperature sensor
+ *
+ * Copyright (c) 2015 Measurement-Specialties
+ *
+ * (7-bit I2C slave address 0x40)
+ *
+ * Datasheet:
+ *  http://www.meas-spec.com/downloads/Digital_Sensor_TSYS02D.pdf
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include "../common/ms_sensors/ms_sensors_i2c.h"
+
+#define TSYS02D_RESET				0xFE
+
+static const int tsys02d_samp_freq[4] = { 20, 40, 70, 140 };
+/* String copy of the above const for readability purpose */
+static const char tsys02d_show_samp_freq[] = "20 40 70 140";
+
+static int tsys02d_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *channel, int *val,
+			    int *val2, long mask)
+{
+	int ret;
+	s32 temperature;
+	struct ms_ht_dev *dev_data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (channel->type) {
+		case IIO_TEMP:	/* in milli °C */
+			ret = ms_sensors_ht_read_temperature(dev_data,
+							     &temperature);
+			if (ret)
+				return ret;
+			*val = temperature;
+
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = tsys02d_samp_freq[dev_data->res_index];
+
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int tsys02d_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct ms_ht_dev *dev_data = iio_priv(indio_dev);
+	int i, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		i = ARRAY_SIZE(tsys02d_samp_freq);
+		while (i-- > 0)
+			if (val == tsys02d_samp_freq[i])
+				break;
+		if (i < 0)
+			return -EINVAL;
+		mutex_lock(&dev_data->lock);
+		dev_data->res_index = i;
+		ret = ms_sensors_write_resolution(dev_data, i);
+		mutex_unlock(&dev_data->lock);
+
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_chan_spec tsys02d_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+	}
+};
+
+static ssize_t tsys02_read_battery_low(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct ms_ht_dev *dev_data = iio_priv(indio_dev);
+
+	return ms_sensors_show_battery_low(dev_data, buf);
+}
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(tsys02d_show_samp_freq);
+static IIO_DEVICE_ATTR(battery_low, S_IRUGO,
+		       tsys02_read_battery_low, NULL, 0);
+
+static struct attribute *tsys02d_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_battery_low.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group tsys02d_attribute_group = {
+	.attrs = tsys02d_attributes,
+};
+
+static const struct iio_info tsys02d_info = {
+	.read_raw = tsys02d_read_raw,
+	.write_raw = tsys02d_write_raw,
+	.attrs = &tsys02d_attribute_group,
+};
+
+static int tsys02d_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct ms_ht_dev *dev_data;
+	struct iio_dev *indio_dev;
+	int ret;
+	u64 serial_number;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WRITE_BYTE |
+				     I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
+		dev_err(&client->dev,
+			"Adapter does not support some i2c transaction\n");
+		return -EOPNOTSUPP;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dev_data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	dev_data = iio_priv(indio_dev);
+	dev_data->client = client;
+	dev_data->res_index = 0;
+	mutex_init(&dev_data->lock);
+
+	indio_dev->info = &tsys02d_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = tsys02d_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tsys02d_channels);
+
+	i2c_set_clientdata(client, indio_dev);
+
+	ret = ms_sensors_reset(client, TSYS02D_RESET, 15000);
+	if (ret)
+		return ret;
+
+	ret = ms_sensors_read_serial(client, &serial_number);
+	if (ret)
+		return ret;
+	dev_info(&client->dev, "Serial number : %llx", serial_number);
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id tsys02d_id[] = {
+	{"tsys02d", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, tsys02d_id);
+
+static struct i2c_driver tsys02d_driver = {
+	.probe = tsys02d_probe,
+	.id_table = tsys02d_id,
+	.driver = {
+		   .name = "tsys02d",
+		   },
+};
+
+module_i2c_driver(tsys02d_driver);
+
+MODULE_DESCRIPTION("Measurement-Specialties tsys02d temperature driver");
+MODULE_AUTHOR("William Markezana <william.markezana@meas-spec.com>");
+MODULE_AUTHOR("Ludovic Tancerel <ludovic.tancerel@maplehightech.com>");
+MODULE_LICENSE("GPL v2");