Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 188 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/qib/qib_qsfp.h b/drivers/infiniband/hw/qib/qib_qsfp.h
new file mode 100644
index 000000000..ad8dbd6ac
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_qsfp.h
@@ -0,0 +1,188 @@
+/*
+ * Copyright (c) 2006, 2007, 2008, 2009 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+/* QSFP support common definitions, for ib_qib driver */
+
+#define QSFP_DEV 0xA0
+#define QSFP_PWR_LAG_MSEC 2000
+#define QSFP_MODPRS_LAG_MSEC 20
+
+/*
+ * Below are masks for various QSFP signals, for Port 1.
+ * Port2 equivalents are shifted by QSFP_GPIO_PORT2_SHIFT.
+ * _N means asserted low
+ */
+#define QSFP_GPIO_MOD_SEL_N (4)
+#define QSFP_GPIO_MOD_PRS_N (8)
+#define QSFP_GPIO_INT_N (0x10)
+#define QSFP_GPIO_MOD_RST_N (0x20)
+#define QSFP_GPIO_LP_MODE (0x40)
+#define QSFP_GPIO_PORT2_SHIFT 5
+
+#define QSFP_PAGESIZE 128
+/* Defined fields that QLogic requires of qualified cables */
+/* Byte 0 is Identifier, not checked */
+/* Byte 1 is reserved "status MSB" */
+/* Byte 2 is "status LSB" We only care that D2 "Flat Mem" is set. */
+/*
+ * Rest of first 128 not used, although 127 is reserved for page select
+ * if module is not "Flat memory".
+ */
+/* Byte 128 is Identifier: must be 0x0c for QSFP, or 0x0d for QSFP+ */
+#define QSFP_MOD_ID_OFFS 128
+/*
+ * Byte 129 is "Extended Identifier". We only care about D7,D6: Power class
+ *  0:1.5W, 1:2.0W, 2:2.5W, 3:3.5W
+ */
+#define QSFP_MOD_PWR_OFFS 129
+/* Byte 130 is Connector type. Not QLogic req'd */
+/* Bytes 131..138 are Transceiver types, bit maps for various tech, none IB */
+/* Byte 139 is encoding. code 0x01 is 8b10b. Not QLogic req'd */
+/* byte 140 is nominal bit-rate, in units of 100Mbits/sec Not QLogic req'd */
+/* Byte 141 is Extended Rate Select. Not QLogic req'd */
+/* Bytes 142..145 are lengths for various fiber types. Not QLogic req'd */
+/* Byte 146 is length for Copper. Units of 1 meter */
+#define QSFP_MOD_LEN_OFFS 146
+/*
+ * Byte 147 is Device technology. D0..3 not Qlogc req'd
+ * D4..7 select from 15 choices, translated by table:
+ */
+#define QSFP_MOD_TECH_OFFS 147
+extern const char *const qib_qsfp_devtech[16];
+/* Active Equalization includes fiber, copper full EQ, and copper near Eq */
+#define QSFP_IS_ACTIVE(tech) ((0xA2FF >> ((tech) >> 4)) & 1)
+/* Active Equalization includes fiber, copper full EQ, and copper far Eq */
+#define QSFP_IS_ACTIVE_FAR(tech) ((0x32FF >> ((tech) >> 4)) & 1)
+/* Attenuation should be valid for copper other than full/near Eq */
+#define QSFP_HAS_ATTEN(tech) ((0x4D00 >> ((tech) >> 4)) & 1)
+/* Length is only valid if technology is "copper" */
+#define QSFP_IS_CU(tech) ((0xED00 >> ((tech) >> 4)) & 1)
+#define QSFP_TECH_1490 9
+
+#define QSFP_OUI(oui) (((unsigned)oui[0] << 16) | ((unsigned)oui[1] << 8) | \
+			oui[2])
+#define QSFP_OUI_AMPHENOL 0x415048
+#define QSFP_OUI_FINISAR  0x009065
+#define QSFP_OUI_GORE     0x002177
+
+/* Bytes 148..163 are Vendor Name, Left-justified Blank-filled */
+#define QSFP_VEND_OFFS 148
+#define QSFP_VEND_LEN 16
+/* Byte 164 is IB Extended tranceiver codes Bits D0..3 are SDR,DDR,QDR,EDR */
+#define QSFP_IBXCV_OFFS 164
+/* Bytes 165..167 are Vendor OUI number */
+#define QSFP_VOUI_OFFS 165
+#define QSFP_VOUI_LEN 3
+/* Bytes 168..183 are Vendor Part Number, string */
+#define QSFP_PN_OFFS 168
+#define QSFP_PN_LEN 16
+/* Bytes 184,185 are Vendor Rev. Left Justified, Blank-filled */
+#define QSFP_REV_OFFS 184
+#define QSFP_REV_LEN 2
+/*
+ * Bytes 186,187 are Wavelength, if Optical. Not Qlogic req'd
+ *  If copper, they are attenuation in dB:
+ * Byte 186 is at 2.5Gb/sec (SDR), Byte 187 at 5.0Gb/sec (DDR)
+ */
+#define QSFP_ATTEN_OFFS 186
+#define QSFP_ATTEN_LEN 2
+/* Bytes 188,189 are Wavelength tolerance, not QLogic req'd */
+/* Byte 190 is Max Case Temp. Not QLogic req'd */
+/* Byte 191 is LSB of sum of bytes 128..190. Not QLogic req'd */
+#define QSFP_CC_OFFS 191
+/* Bytes 192..195 are Options implemented in qsfp. Not Qlogic req'd */
+/* Bytes 196..211 are Serial Number, String */
+#define QSFP_SN_OFFS 196
+#define QSFP_SN_LEN 16
+/* Bytes 212..219 are date-code YYMMDD (MM==1 for Jan) */
+#define QSFP_DATE_OFFS 212
+#define QSFP_DATE_LEN 6
+/* Bytes 218,219 are optional lot-code, string */
+#define QSFP_LOT_OFFS 218
+#define QSFP_LOT_LEN 2
+/* Bytes 220, 221 indicate monitoring options, Not QLogic req'd */
+/* Byte 223 is LSB of sum of bytes 192..222 */
+#define QSFP_CC_EXT_OFFS 223
+
+/*
+ * struct qib_qsfp_data encapsulates state of QSFP device for one port.
+ * it will be part of port-chip-specific data if a board supports QSFP.
+ *
+ * Since multiple board-types use QSFP, and their pport_data structs
+ * differ (in the chip-specific section), we need a pointer to its head.
+ *
+ * Avoiding premature optimization, we will have one work_struct per port,
+ * and let the (increasingly inaccurately named) eep_lock arbitrate
+ * access to common resources.
+ *
+ */
+
+/*
+ * Hold the parts of the onboard EEPROM that we care about, so we aren't
+ * coonstantly bit-boffing
+ */
+struct qib_qsfp_cache {
+	u8 id;	/* must be 0x0C or 0x0D; 0 indicates invalid EEPROM read */
+	u8 pwr; /* in D6,7 */
+	u8 len;	/* in meters, Cu only */
+	u8 tech;
+	char vendor[QSFP_VEND_LEN];
+	u8 xt_xcv; /* Ext. tranceiver codes, 4 lsbs are IB speed supported */
+	u8 oui[QSFP_VOUI_LEN];
+	u8 partnum[QSFP_PN_LEN];
+	u8 rev[QSFP_REV_LEN];
+	u8 atten[QSFP_ATTEN_LEN];
+	u8 cks1;	/* Checksum of bytes 128..190 */
+	u8 serial[QSFP_SN_LEN];
+	u8 date[QSFP_DATE_LEN];
+	u8 lot[QSFP_LOT_LEN];
+	u8 cks2;	/* Checsum of bytes 192..222 */
+};
+
+#define QSFP_PWR(pbyte) (((pbyte) >> 6) & 3)
+#define QSFP_ATTEN_SDR(attenarray) (attenarray[0])
+#define QSFP_ATTEN_DDR(attenarray) (attenarray[1])
+
+struct qib_qsfp_data {
+	/* Helps to find our way */
+	struct qib_pportdata *ppd;
+	struct work_struct work;
+	struct qib_qsfp_cache cache;
+	unsigned long t_insert;
+	u8 modpresent;
+};
+
+extern int qib_refresh_qsfp_cache(struct qib_pportdata *ppd,
+				  struct qib_qsfp_cache *cp);
+extern int qib_qsfp_mod_present(struct qib_pportdata *ppd);
+extern void qib_qsfp_init(struct qib_qsfp_data *qd,
+			  void (*fevent)(struct work_struct *));